diff options
author | Jay Cliburn <jacliburn@bellsouth.net> | 2008-02-02 19:50:12 -0600 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2008-03-17 07:49:25 -0400 |
commit | 6446a860f8b72b6a7b6722b3e30c4b00d6f99967 (patch) | |
tree | c561e903e498ee537d541b9af9fdf89aca1294a3 /drivers/net | |
parent | 0dde4ef99dcbf221bce6c0a5c3c3e4cdfea0b370 (diff) | |
download | op-kernel-dev-6446a860f8b72b6a7b6722b3e30c4b00d6f99967.zip op-kernel-dev-6446a860f8b72b6a7b6722b3e30c4b00d6f99967.tar.gz |
atl1: reduce forward declarations
Rearrange functions to allow removal of some forward declarations.
Make certain global functions static along the way.
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Acked-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/atlx/atl1.c | 1406 | ||||
-rw-r--r-- | drivers/net/atlx/atl1.h | 10 |
2 files changed, 703 insertions, 713 deletions
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 6f4a1d5..240db84 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -108,6 +108,709 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)"); /* + * Reset the transmit and receive units; mask and clear all interrupts. + * hw - Struct containing variables accessed by shared code + * return : 0 or idle status (if error) + */ +static s32 atl1_reset_hw(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + u32 icr; + int i; + + /* + * Clear Interrupt mask to stop board from generating + * interrupts & Clear any pending interrupt events + */ + /* + * iowrite32(0, hw->hw_addr + REG_IMR); + * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); + */ + + /* + * Issue Soft Reset to the MAC. This will reset the chip's + * transmit, receive, DMA. It will not effect + * the current PCI configuration. The global reset bit is self- + * clearing, and should clear within a microsecond. + */ + iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); + ioread32(hw->hw_addr + REG_MASTER_CTRL); + + iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); + ioread16(hw->hw_addr + REG_PHY_ENABLE); + + /* delay about 1ms */ + msleep(1); + + /* Wait at least 10ms for All module to be Idle */ + for (i = 0; i < 10; i++) { + icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); + if (!icr) + break; + /* delay 1 ms */ + msleep(1); + /* FIXME: still the right way to do this? */ + cpu_relax(); + } + + if (icr) { + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); + return icr; + } + + return 0; +} + +/* function about EEPROM + * + * check_eeprom_exist + * return 0 if eeprom exist + */ +static int atl1_check_eeprom_exist(struct atl1_hw *hw) +{ + u32 value; + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (value & SPI_FLASH_CTRL_EN_VPD) { + value &= ~SPI_FLASH_CTRL_EN_VPD; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + } + + value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); + return ((value & 0xFF00) == 0x6C00) ? 0 : 1; +} + +static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) +{ + int i; + u32 control; + + if (offset & 3) + /* address do not align */ + return false; + + iowrite32(0, hw->hw_addr + REG_VPD_DATA); + control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; + iowrite32(control, hw->hw_addr + REG_VPD_CAP); + ioread32(hw->hw_addr + REG_VPD_CAP); + + for (i = 0; i < 10; i++) { + msleep(2); + control = ioread32(hw->hw_addr + REG_VPD_CAP); + if (control & VPD_CAP_VPD_FLAG) + break; + } + if (control & VPD_CAP_VPD_FLAG) { + *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); + return true; + } + /* timeout */ + return false; +} + +/* + * Reads the value from a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to read + */ +s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) +{ + u32 val; + int i; + + val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + if (!(val & (MDIO_START | MDIO_BUSY))) { + *phy_data = (u16) val; + return 0; + } + return ATLX_ERR_PHY; +} + +#define CUSTOM_SPI_CS_SETUP 2 +#define CUSTOM_SPI_CLK_HI 2 +#define CUSTOM_SPI_CLK_LO 2 +#define CUSTOM_SPI_CS_HOLD 2 +#define CUSTOM_SPI_CS_HI 3 + +static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) +{ + int i; + u32 value; + + iowrite32(0, hw->hw_addr + REG_SPI_DATA); + iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); + + value = SPI_FLASH_CTRL_WAIT_READY | + (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << + SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & + SPI_FLASH_CTRL_CLK_HI_MASK) << + SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & + SPI_FLASH_CTRL_CLK_LO_MASK) << + SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & + SPI_FLASH_CTRL_CS_HOLD_MASK) << + SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & + SPI_FLASH_CTRL_CS_HI_MASK) << + SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << + SPI_FLASH_CTRL_INS_SHIFT; + + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + + value |= SPI_FLASH_CTRL_START; + iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); + ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + + for (i = 0; i < 10; i++) { + msleep(1); + value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); + if (!(value & SPI_FLASH_CTRL_START)) + break; + } + + if (value & SPI_FLASH_CTRL_START) + return false; + + *buf = ioread32(hw->hw_addr + REG_SPI_DATA); + + return true; +} + +/* + * get_permanent_address + * return 0 if get valid mac address, + */ +static int atl1_get_permanent_address(struct atl1_hw *hw) +{ + u32 addr[2]; + u32 i, control; + u16 reg; + u8 eth_addr[ETH_ALEN]; + bool key_valid; + + if (is_valid_ether_addr(hw->perm_mac_addr)) + return 0; + + /* init */ + addr[0] = addr[1] = 0; + + if (!atl1_check_eeprom_exist(hw)) { + reg = 0; + key_valid = false; + /* Read out all EEPROM content */ + i = 0; + while (1) { + if (atl1_read_eeprom(hw, i + 0x100, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + break; + } else + /* read error */ + break; + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + return 1; + } + + /* see if SPI FLAGS exist ? */ + addr[0] = addr[1] = 0; + reg = 0; + key_valid = false; + i = 0; + while (1) { + if (atl1_spi_read(hw, i + 0x1f000, &control)) { + if (key_valid) { + if (reg == REG_MAC_STA_ADDR) + addr[0] = control; + else if (reg == (REG_MAC_STA_ADDR + 4)) + addr[1] = control; + key_valid = false; + } else if ((control & 0xff) == 0x5A) { + key_valid = true; + reg = (u16) (control >> 16); + } else + /* data end */ + break; + } else + /* read error */ + break; + i += 4; + } + + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + /* + * On some motherboards, the MAC address is written by the + * BIOS directly to the MAC register during POST, and is + * not stored in eeprom. If all else thus far has failed + * to fetch the permanent MAC address, try reading it directly. + */ + addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); + addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); + *(u32 *) ð_addr[2] = swab32(addr[0]); + *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); + if (is_valid_ether_addr(eth_addr)) { + memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); + return 0; + } + + return 1; +} + +/* + * Reads the adapter's MAC address from the EEPROM + * hw - Struct containing variables accessed by shared code + */ +s32 atl1_read_mac_addr(struct atl1_hw *hw) +{ + u16 i; + + if (atl1_get_permanent_address(hw)) + random_ether_addr(hw->perm_mac_addr); + + for (i = 0; i < ETH_ALEN; i++) + hw->mac_addr[i] = hw->perm_mac_addr[i]; + return 0; +} + +/* + * Hashes an address to determine its location in the multicast table + * hw - Struct containing variables accessed by shared code + * mc_addr - the multicast address to hash + * + * atl1_hash_mc_addr + * purpose + * set hash value for a multicast address + * hash calcu processing : + * 1. calcu 32bit CRC for multicast address + * 2. reverse crc with MSB to LSB + */ +u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) +{ + u32 crc32, value = 0; + int i; + + crc32 = ether_crc_le(6, mc_addr); + for (i = 0; i < 32; i++) + value |= (((crc32 >> i) & 1) << (31 - i)); + + return value; +} + +/* + * Sets the bit in the multicast table corresponding to the hash value. + * hw - Struct containing variables accessed by shared code + * hash_value - Multicast address hash value + */ +void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) +{ + u32 hash_bit, hash_reg; + u32 mta; + + /* + * The HASH Table is a register array of 2 32-bit registers. + * It is treated like an array of 64 bits. We want to set + * bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The register is determined by the + * upper 7 bits of the hash value and the bit within that + * register are determined by the lower 5 bits of the value. + */ + hash_reg = (hash_value >> 31) & 0x1; + hash_bit = (hash_value >> 26) & 0x1F; + mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); + mta |= (1 << hash_bit); + iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); +} + +/* + * Writes a value to a PHY register + * hw - Struct containing variables accessed by shared code + * reg_addr - address of the PHY register to write + * data - data to write to the PHY + */ +static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) +{ + int i; + u32 val; + + val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | + (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | + MDIO_SUP_PREAMBLE | + MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; + iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); + ioread32(hw->hw_addr + REG_MDIO_CTRL); + + for (i = 0; i < MDIO_WAIT_TIMES; i++) { + udelay(2); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if (!(val & (MDIO_START | MDIO_BUSY))) + return 0; + + return ATLX_ERR_PHY; +} + +/* + * Make L001's PHY out of Power Saving State (bug) + * hw - Struct containing variables accessed by shared code + * when power on, L001's PHY always on Power saving State + * (Gigabit Link forbidden) + */ +static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) +{ + s32 ret; + ret = atl1_write_phy_reg(hw, 29, 0x0029); + if (ret) + return ret; + return atl1_write_phy_reg(hw, 30, 0); +} + +/* + *TODO: do something or get rid of this + */ +static s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) +{ +/* s32 ret_val; + * u16 phy_data; + */ + +/* + ret_val = atl1_write_phy_reg(hw, ...); + ret_val = atl1_write_phy_reg(hw, ...); + .... +*/ + return 0; +} + +/* + * Resets the PHY and make all config validate + * hw - Struct containing variables accessed by shared code + * + * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) + */ +static s32 atl1_phy_reset(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + u16 phy_data; + + if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || + hw->media_type == MEDIA_TYPE_1000M_FULL) + phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; + else { + switch (hw->media_type) { + case MEDIA_TYPE_100M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | + MII_CR_RESET; + break; + case MEDIA_TYPE_100M_HALF: + phy_data = MII_CR_SPEED_100 | MII_CR_RESET; + break; + case MEDIA_TYPE_10M_FULL: + phy_data = + MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; + break; + default: + /* MEDIA_TYPE_10M_HALF: */ + phy_data = MII_CR_SPEED_10 | MII_CR_RESET; + break; + } + } + + ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); + if (ret_val) { + u32 val; + int i; + /* pcie serdes link may be down! */ + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "pcie phy link down\n"); + + for (i = 0; i < 25; i++) { + msleep(1); + val = ioread32(hw->hw_addr + REG_MDIO_CTRL); + if (!(val & (MDIO_START | MDIO_BUSY))) + break; + } + + if ((val & (MDIO_START | MDIO_BUSY)) != 0) { + if (netif_msg_hw(adapter)) + dev_warn(&pdev->dev, + "pcie link down at least 25ms\n"); + return ret_val; + } + } + return 0; +} + +/* + * Configures PHY autoneg and flow control advertisement settings + * hw - Struct containing variables accessed by shared code + */ +static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) +{ + s32 ret_val; + s16 mii_autoneg_adv_reg; + s16 mii_1000t_ctrl_reg; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; + + /* Read the MII 1000Base-T Control Register (Address 9). */ + mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; + + /* + * First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; + mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; + + /* + * Need to parse media_type and set up + * the appropriate PHY registers. + */ + switch (hw->media_type) { + case MEDIA_TYPE_AUTO_SENSOR: + mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | + MII_AR_10T_FD_CAPS | + MII_AR_100TX_HD_CAPS | + MII_AR_100TX_FD_CAPS); + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_1000M_FULL: + mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; + break; + + case MEDIA_TYPE_100M_FULL: + mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; + break; + + case MEDIA_TYPE_100M_HALF: + mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; + break; + + case MEDIA_TYPE_10M_FULL: + mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; + break; + + default: + mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; + break; + } + + /* flow control fixed to enable all */ + mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); + + hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; + hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; + + ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + + return 0; +} + +/* + * Configures link settings. + * hw - Struct containing variables accessed by shared code + * Assumes the hardware has previously been reset and the + * transmitter and receiver are not enabled. + */ +static s32 atl1_setup_link(struct atl1_hw *hw) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + + /* + * Options: + * PHY will advertise value(s) parsed from + * autoneg_advertised and fc + * no matter what autoneg is , We will not wait link result. + */ + ret_val = atl1_phy_setup_autoneg_adv(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, + "error setting up autonegotiation\n"); + return ret_val; + } + /* SW.Reset , En-Auto-Neg if needed */ + ret_val = atl1_phy_reset(hw); + if (ret_val) { + if (netif_msg_link(adapter)) + dev_dbg(&pdev->dev, "error resetting phy\n"); + return ret_val; + } + hw->phy_configured = true; + return ret_val; +} + +static void atl1_init_flash_opcode(struct atl1_hw *hw) +{ + if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) + /* Atmel */ + hw->flash_vendor = 0; + + /* Init OP table */ + iowrite8(flash_table[hw->flash_vendor].cmd_program, + hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); + iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, + hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, + hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); + iowrite8(flash_table[hw->flash_vendor].cmd_rdid, + hw->hw_addr + REG_SPI_FLASH_OP_RDID); + iowrite8(flash_table[hw->flash_vendor].cmd_wren, + hw->hw_addr + REG_SPI_FLASH_OP_WREN); + iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, + hw->hw_addr + REG_SPI_FLASH_OP_RDSR); + iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, + hw->hw_addr + REG_SPI_FLASH_OP_WRSR); + iowrite8(flash_table[hw->flash_vendor].cmd_read, + hw->hw_addr + REG_SPI_FLASH_OP_READ); +} + +/* + * Performs basic configuration of the adapter. + * hw - Struct containing variables accessed by shared code + * Assumes that the controller has previously been reset and is in a + * post-reset uninitialized state. Initializes multicast table, + * and Calls routines to setup link + * Leaves the transmit and receive units disabled and uninitialized. + */ +static s32 atl1_init_hw(struct atl1_hw *hw) +{ + u32 ret_val = 0; + + /* Zero out the Multicast HASH table */ + iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); + /* clear the old settings from the multicast hash table */ + iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); + + atl1_init_flash_opcode(hw); + + if (!hw->phy_configured) { + /* enable GPHY LinkChange Interrrupt */ + ret_val = atl1_write_phy_reg(hw, 18, 0xC00); + if (ret_val) + return ret_val; + /* make PHY out of power-saving state */ + ret_val = atl1_phy_leave_power_saving(hw); + if (ret_val) + return ret_val; + /* Call a subroutine to configure the link */ + ret_val = atl1_setup_link(hw); + } + return ret_val; +} + +/* + * Detects the current speed and duplex settings of the hardware. + * hw - Struct containing variables accessed by shared code + * speed - Speed of the connection + * duplex - Duplex setting of the connection + */ +static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) +{ + struct pci_dev *pdev = hw->back->pdev; + struct atl1_adapter *adapter = hw->back; + s32 ret_val; + u16 phy_data; + + /* ; --- Read PHY Specific Status Register (17) */ + ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); + if (ret_val) + return ret_val; + + if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) + return ATLX_ERR_PHY_RES; + + switch (phy_data & MII_ATLX_PSSR_SPEED) { + case MII_ATLX_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case MII_ATLX_PSSR_100MBS: + *speed = SPEED_100; + break; + case MII_ATLX_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + if (netif_msg_hw(adapter)) + dev_dbg(&pdev->dev, "error getting speed\n"); + return ATLX_ERR_PHY_SPEED; + break; + } + if (phy_data & MII_ATLX_PSSR_DPLX) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return 0; +} + +void atl1_set_mac_addr(struct atl1_hw *hw) +{ + u32 value; + /* + * 00-0B-6A-F6-00-DC + * 0: 6AF600DC 1: 000B + * low dword + */ + value = (((u32) hw->mac_addr[2]) << 24) | + (((u32) hw->mac_addr[3]) << 16) | + (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); + iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); + /* high dword */ + value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); + iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); +} + +/* * atl1_sw_init - Initialize general software structures (struct atl1_adapter) * @adapter: board private structure to initialize * @@ -2860,706 +3563,3 @@ const struct ethtool_ops atl1_ethtool_ops = { .get_sset_count = atl1_get_sset_count, .set_tso = ethtool_op_set_tso, }; - -/* - * Reset the transmit and receive units; mask and clear all interrupts. - * hw - Struct containing variables accessed by shared code - * return : 0 or idle status (if error) - */ -s32 atl1_reset_hw(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - u32 icr; - int i; - - /* - * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events - */ - /* - * iowrite32(0, hw->hw_addr + REG_IMR); - * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); - */ - - /* - * Issue Soft Reset to the MAC. This will reset the chip's - * transmit, receive, DMA. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); - ioread32(hw->hw_addr + REG_MASTER_CTRL); - - iowrite16(1, hw->hw_addr + REG_PHY_ENABLE); - ioread16(hw->hw_addr + REG_PHY_ENABLE); - - /* delay about 1ms */ - msleep(1); - - /* Wait at least 10ms for All module to be Idle */ - for (i = 0; i < 10; i++) { - icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); - if (!icr) - break; - /* delay 1 ms */ - msleep(1); - /* FIXME: still the right way to do this? */ - cpu_relax(); - } - - if (icr) { - if (netif_msg_hw(adapter)) - dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); - return icr; - } - - return 0; -} - -/* function about EEPROM - * - * check_eeprom_exist - * return 0 if eeprom exist - */ -static int atl1_check_eeprom_exist(struct atl1_hw *hw) -{ - u32 value; - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (value & SPI_FLASH_CTRL_EN_VPD) { - value &= ~SPI_FLASH_CTRL_EN_VPD; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - } - - value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); - return ((value & 0xFF00) == 0x6C00) ? 0 : 1; -} - -static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) -{ - int i; - u32 control; - - if (offset & 3) - /* address do not align */ - return false; - - iowrite32(0, hw->hw_addr + REG_VPD_DATA); - control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; - iowrite32(control, hw->hw_addr + REG_VPD_CAP); - ioread32(hw->hw_addr + REG_VPD_CAP); - - for (i = 0; i < 10; i++) { - msleep(2); - control = ioread32(hw->hw_addr + REG_VPD_CAP); - if (control & VPD_CAP_VPD_FLAG) - break; - } - if (control & VPD_CAP_VPD_FLAG) { - *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); - return true; - } - /* timeout */ - return false; -} - -/* - * Reads the value from a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to read - */ -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) -{ - u32 val; - int i; - - val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - if (!(val & (MDIO_START | MDIO_BUSY))) { - *phy_data = (u16) val; - return 0; - } - return ATLX_ERR_PHY; -} - -#define CUSTOM_SPI_CS_SETUP 2 -#define CUSTOM_SPI_CLK_HI 2 -#define CUSTOM_SPI_CLK_LO 2 -#define CUSTOM_SPI_CS_HOLD 2 -#define CUSTOM_SPI_CS_HI 3 - -static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) -{ - int i; - u32 value; - - iowrite32(0, hw->hw_addr + REG_SPI_DATA); - iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); - - value = SPI_FLASH_CTRL_WAIT_READY | - (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << - SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & - SPI_FLASH_CTRL_CLK_HI_MASK) << - SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & - SPI_FLASH_CTRL_CLK_LO_MASK) << - SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & - SPI_FLASH_CTRL_CS_HOLD_MASK) << - SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & - SPI_FLASH_CTRL_CS_HI_MASK) << - SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << - SPI_FLASH_CTRL_INS_SHIFT; - - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - - value |= SPI_FLASH_CTRL_START; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - - for (i = 0; i < 10; i++) { - msleep(1); - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (!(value & SPI_FLASH_CTRL_START)) - break; - } - - if (value & SPI_FLASH_CTRL_START) - return false; - - *buf = ioread32(hw->hw_addr + REG_SPI_DATA); - - return true; -} - -/* - * get_permanent_address - * return 0 if get valid mac address, - */ -static int atl1_get_permanent_address(struct atl1_hw *hw) -{ - u32 addr[2]; - u32 i, control; - u16 reg; - u8 eth_addr[ETH_ALEN]; - bool key_valid; - - if (is_valid_ether_addr(hw->perm_mac_addr)) - return 0; - - /* init */ - addr[0] = addr[1] = 0; - - if (!atl1_check_eeprom_exist(hw)) { - reg = 0; - key_valid = false; - /* Read out all EEPROM content */ - i = 0; - while (1) { - if (atl1_read_eeprom(hw, i + 0x100, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; - } else - /* read error */ - break; - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - return 1; - } - - /* see if SPI FLAGS exist ? */ - addr[0] = addr[1] = 0; - reg = 0; - key_valid = false; - i = 0; - while (1) { - if (atl1_spi_read(hw, i + 0x1f000, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - /* data end */ - break; - } else - /* read error */ - break; - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - /* - * On some motherboards, the MAC address is written by the - * BIOS directly to the MAC register during POST, and is - * not stored in eeprom. If all else thus far has failed - * to fetch the permanent MAC address, try reading it directly. - */ - addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); - addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - return 1; -} - -/* - * Reads the adapter's MAC address from the EEPROM - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_read_mac_addr(struct atl1_hw *hw) -{ - u16 i; - - if (atl1_get_permanent_address(hw)) - random_ether_addr(hw->perm_mac_addr); - - for (i = 0; i < ETH_ALEN; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return 0; -} - -/* - * Hashes an address to determine its location in the multicast table - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - * - * atl1_hash_mc_addr - * purpose - * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB - */ -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) -{ - u32 crc32, value = 0; - int i; - - crc32 = ether_crc_le(6, mc_addr); - for (i = 0; i < 32; i++) - value |= (((crc32 >> i) & 1) << (31 - i)); - - return value; -} - -/* - * Sets the bit in the multicast table corresponding to the hash value. - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value - */ -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) -{ - u32 hash_bit, hash_reg; - u32 mta; - - /* - * The HASH Table is a register array of 2 32-bit registers. - * It is treated like an array of 64 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 31) & 0x1; - hash_bit = (hash_value >> 26) & 0x1F; - mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); - mta |= (1 << hash_bit); - iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); -} - -/* - * Writes a value to a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to write - * data - data to write to the PHY - */ -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) -{ - int i; - u32 val; - - val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | - (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | - MDIO_SUP_PREAMBLE | - MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if (!(val & (MDIO_START | MDIO_BUSY))) - return 0; - - return ATLX_ERR_PHY; -} - -/* - * Make L001's PHY out of Power Saving State (bug) - * hw - Struct containing variables accessed by shared code - * when power on, L001's PHY always on Power saving State - * (Gigabit Link forbidden) - */ -static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) -{ - s32 ret; - ret = atl1_write_phy_reg(hw, 29, 0x0029); - if (ret) - return ret; - return atl1_write_phy_reg(hw, 30, 0); -} - -/* - *TODO: do something or get rid of this - */ -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ -/* s32 ret_val; - * u16 phy_data; - */ - -/* - ret_val = atl1_write_phy_reg(hw, ...); - ret_val = atl1_write_phy_reg(hw, ...); - .... -*/ - return 0; -} - -/* - * Resets the PHY and make all config validate - * hw - Struct containing variables accessed by shared code - * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) - */ -static s32 atl1_phy_reset(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - s32 ret_val; - u16 phy_data; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: - /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - } - - ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); - if (ret_val) { - u32 val; - int i; - /* pcie serdes link may be down! */ - if (netif_msg_hw(adapter)) - dev_dbg(&pdev->dev, "pcie phy link down\n"); - - for (i = 0; i < 25; i++) { - msleep(1); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - if (netif_msg_hw(adapter)) - dev_warn(&pdev->dev, - "pcie link down at least 25ms\n"); - return ret_val; - } - } - return 0; -} - -/* - * Configures PHY autoneg and flow control advertisement settings - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) -{ - s32 ret_val; - s16 mii_autoneg_adv_reg; - s16 mii_1000t_ctrl_reg; - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; - - /* Read the MII 1000Base-T Control Register (Address 9). */ - mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK; - - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; - mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK; - - /* - * Need to parse media_type and set up - * the appropriate PHY registers. - */ - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | - MII_AR_10T_FD_CAPS | - MII_AR_100TX_HD_CAPS | - MII_AR_100TX_FD_CAPS); - mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_1000M_FULL: - mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_100M_FULL: - mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; - break; - - case MEDIA_TYPE_100M_HALF: - mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; - break; - - case MEDIA_TYPE_10M_FULL: - mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; - break; - - default: - mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; - break; - } - - /* flow control fixed to enable all */ - mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); - - hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; - hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; - - ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - - return 0; -} - -/* - * Configures link settings. - * hw - Struct containing variables accessed by shared code - * Assumes the hardware has previously been reset and the - * transmitter and receiver are not enabled. - */ -static s32 atl1_setup_link(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - s32 ret_val; - - /* - * Options: - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * no matter what autoneg is , We will not wait link result. - */ - ret_val = atl1_phy_setup_autoneg_adv(hw); - if (ret_val) { - if (netif_msg_link(adapter)) - dev_dbg(&pdev->dev, - "error setting up autonegotiation\n"); - return ret_val; - } - /* SW.Reset , En-Auto-Neg if needed */ - ret_val = atl1_phy_reset(hw); - if (ret_val) { - if (netif_msg_link(adapter)) - dev_dbg(&pdev->dev, "error resetting phy\n"); - return ret_val; - } - hw->phy_configured = true; - return ret_val; -} - -static void atl1_init_flash_opcode(struct atl1_hw *hw) -{ - if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) - /* Atmel */ - hw->flash_vendor = 0; - - /* Init OP table */ - iowrite8(flash_table[hw->flash_vendor].cmd_program, - hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); - iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, - hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, - hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_rdid, - hw->hw_addr + REG_SPI_FLASH_OP_RDID); - iowrite8(flash_table[hw->flash_vendor].cmd_wren, - hw->hw_addr + REG_SPI_FLASH_OP_WREN); - iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, - hw->hw_addr + REG_SPI_FLASH_OP_RDSR); - iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, - hw->hw_addr + REG_SPI_FLASH_OP_WRSR); - iowrite8(flash_table[hw->flash_vendor].cmd_read, - hw->hw_addr + REG_SPI_FLASH_OP_READ); -} - -/* - * Performs basic configuration of the adapter. - * hw - Struct containing variables accessed by shared code - * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, - * and Calls routines to setup link - * Leaves the transmit and receive units disabled and uninitialized. - */ -s32 atl1_init_hw(struct atl1_hw *hw) -{ - u32 ret_val = 0; - - /* Zero out the Multicast HASH table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - /* clear the old settings from the multicast hash table */ - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - - atl1_init_flash_opcode(hw); - - if (!hw->phy_configured) { - /* enable GPHY LinkChange Interrrupt */ - ret_val = atl1_write_phy_reg(hw, 18, 0xC00); - if (ret_val) - return ret_val; - /* make PHY out of power-saving state */ - ret_val = atl1_phy_leave_power_saving(hw); - if (ret_val) - return ret_val; - /* Call a subroutine to configure the link */ - ret_val = atl1_setup_link(hw); - } - return ret_val; -} - -/* - * Detects the current speed and duplex settings of the hardware. - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - */ -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) -{ - struct pci_dev *pdev = hw->back->pdev; - struct atl1_adapter *adapter = hw->back; - s32 ret_val; - u16 phy_data; - - /* ; --- Read PHY Specific Status Register (17) */ - ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data); - if (ret_val) - return ret_val; - - if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED)) - return ATLX_ERR_PHY_RES; - - switch (phy_data & MII_ATLX_PSSR_SPEED) { - case MII_ATLX_PSSR_1000MBS: - *speed = SPEED_1000; - break; - case MII_ATLX_PSSR_100MBS: - *speed = SPEED_100; - break; - case MII_ATLX_PSSR_10MBS: - *speed = SPEED_10; - break; - default: - if (netif_msg_hw(adapter)) - dev_dbg(&pdev->dev, "error getting speed\n"); - return ATLX_ERR_PHY_SPEED; - break; - } - if (phy_data & MII_ATLX_PSSR_DPLX) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - return 0; -} - -void atl1_set_mac_addr(struct atl1_hw *hw) -{ - u32 value; - /* - * 00-0B-6A-F6-00-DC - * 0: 6AF600DC 1: 000B - * low dword - */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - /* high dword */ - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); -} diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index 6220298..51893d6 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -56,20 +56,10 @@ struct atl1_adapter; struct atl1_hw; /* function prototypes needed by multiple files */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw); -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_read_mac_addr(struct atl1_hw *hw); -s32 atl1_init_hw(struct atl1_hw *hw); -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex); -s32 atl1_set_speed_and_duplex(struct atl1_hw *hw, u16 speed, u16 duplex); u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data); void atl1_set_mac_addr(struct atl1_hw *hw); -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw); -s32 atl1_reset_hw(struct atl1_hw *hw); -void atl1_check_options(struct atl1_adapter *adapter); static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static u32 atl1_check_link(struct atl1_adapter *adapter); |