summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
authorIvo van Doorn <ivdoorn@gmail.com>2007-09-25 20:55:39 +0200
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:53:03 -0700
commit066cb637b1b562bebd09d237bfaaca6724f247e5 (patch)
tree340b3902e69246cb73e820bbd9994bd1bdcca402 /drivers/net/wireless
parent12dadb9009723dd0512091643e6e403f9e1b25cb (diff)
downloadop-kernel-dev-066cb637b1b562bebd09d237bfaaca6724f247e5.zip
op-kernel-dev-066cb637b1b562bebd09d237bfaaca6724f247e5.tar.gz
[PATCH] rt2x00: Reorganize rt2x00dev->flags
The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h31
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c27
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c55
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h3
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c55
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00rfkill.c12
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c2
11 files changed, 115 insertions, 84 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 03a94a3..faa4711 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1374,7 +1374,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
* Check if the BBP tuning should be enabled.
@@ -1469,7 +1469,7 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the beacon ring
*/
- __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 892baa9..929257d 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1545,7 +1545,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
* Check if the BBP tuning should be enabled.
@@ -1801,7 +1801,7 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the beacon ring
*/
- __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index f4e6f6e..7aacc7b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1573,7 +1573,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires the beacon ring
*/
- __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 5f05c7e..ea20f3a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -493,24 +493,21 @@ struct rt2x00_dev {
* of the device capabilities are stored.
*/
unsigned long flags;
-#define DEVICE_ENABLED_RADIO 1
-#define DEVICE_ENABLED_RADIO_HW 2
+#define DEVICE_PRESENT 1
+#define DEVICE_REGISTERED_HW 2
#define DEVICE_INITIALIZED 3
-#define DEVICE_INITIALIZED_HW 4
-#define REQUIRE_FIRMWARE 5
-/* Hole: Add new Flag here */
-#define INTERFACE_RESUME 8
-#define INTERFACE_ENABLED 9
-/* Hole: Add new Flag here */
-#define REQUIRE_BEACON_RING 11
-#define DEVICE_SUPPORT_HW_BUTTON 12
-#define CONFIG_FRAME_TYPE 13
-#define CONFIG_RF_SEQUENCE 14
-/* Hole: Add new Flag here */
-#define CONFIG_EXTERNAL_LNA_A 16
-#define CONFIG_EXTERNAL_LNA_BG 17
-#define CONFIG_DOUBLE_ANTENNA 18
-#define CONFIG_DISABLE_LINK_TUNING 19
+#define DEVICE_STARTED 4
+#define DEVICE_ENABLED_RADIO 5
+#define DEVICE_ENABLED_RADIO_HW 6
+#define DRIVER_REQUIRE_FIRMWARE 7
+#define DRIVER_REQUIRE_BEACON_RING 8
+#define CONFIG_SUPPORT_HW_BUTTON 9
+#define CONFIG_FRAME_TYPE 10
+#define CONFIG_RF_SEQUENCE 11
+#define CONFIG_EXTERNAL_LNA_A 12
+#define CONFIG_EXTERNAL_LNA_BG 13
+#define CONFIG_DOUBLE_ANTENNA 14
+#define CONFIG_DISABLE_LINK_TUNING 15
/*
* Chipset identification.
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f962ce4..13b5106 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -48,33 +48,20 @@ void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type)
{
- struct interface *intf = &rt2x00dev->interface;
-
- if (!test_bit(INTERFACE_RESUME, &rt2x00dev->flags) &&
- (!!test_bit(INTERFACE_ENABLED, &rt2x00dev->flags) ==
- !!is_interface_present(intf)))
- return;
-
- rt2x00dev->ops->lib->config_type(rt2x00dev, type);
-
- /*
- * Update the configuration flags.
- */
- if (is_interface_present(intf))
- __set_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
- else
- __clear_bit(INTERFACE_ENABLED, &rt2x00dev->flags);
+ if (type != INVALID_INTERFACE)
+ rt2x00dev->ops->lib->config_type(rt2x00dev, type);
}
-void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf)
+void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf, const int force_config)
{
int flags = 0;
/*
- * If we are in RESUME state we should
- * force all configuration options.
+ * In some situations we want to force all configurations
+ * to be reloaded (When resuming for instance).
*/
- if (test_bit(INTERFACE_RESUME, &rt2x00dev->flags)) {
+ if (force_config) {
flags = CONFIG_UPDATE_ALL;
goto config;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 4f66adc..f8f7e6e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -40,7 +40,7 @@
struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev,
const unsigned int queue)
{
- int beacon = test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+ int beacon = test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags);
/*
* Check if we are requesting a reqular TX ring,
@@ -102,7 +102,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
* And check if the hardware button has been disabled.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
- (test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags) &&
+ (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) &&
!test_bit(DEVICE_ENABLED_RADIO_HW, &rt2x00dev->flags)))
return 0;
@@ -162,6 +162,9 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable)
{
enum dev_state state = enable ? STATE_RADIO_RX_ON : STATE_RADIO_RX_OFF;
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
/*
* When we are disabling the RX, we should also stop the link tuner.
*/
@@ -721,7 +724,7 @@ exit:
static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
{
- if (test_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags))
+ if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags))
ieee80211_unregister_hw(rt2x00dev->hw);
if (likely(rt2x00dev->hwmodes)) {
@@ -753,7 +756,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
return status;
}
- __set_bit(DEVICE_INITIALIZED_HW, &rt2x00dev->flags);
+ __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags);
return 0;
}
@@ -810,7 +813,7 @@ static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev)
return -ENOMEM;
}
- if (!test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags))
+ if (!test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags))
return 0;
/*
@@ -919,7 +922,7 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
* Atim: 1 (if required)
*/
rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues +
- (2 * test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags));
+ (2 * test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags));
ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL);
if (!ring) {
@@ -932,7 +935,7 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->rx = ring;
rt2x00dev->tx = &rt2x00dev->rx[1];
- if (test_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags))
+ if (test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags))
rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues];
/*
@@ -1011,6 +1014,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
*/
rt2x00debug_register(rt2x00dev);
+ __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
return 0;
exit:
@@ -1022,6 +1027,8 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
{
+ __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
/*
* Disable radio.
*/
@@ -1068,6 +1075,13 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
int retval;
NOTICE(rt2x00dev, "Going to sleep.\n");
+ __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
+ /*
+ * Only continue if mac80211 has open interfaces.
+ */
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ goto exit;
/*
* Disable radio and unitialize all items
@@ -1077,6 +1091,7 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
rt2x00lib_uninitialize(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
+exit:
/*
* Set device mode to sleep for power management.
*/
@@ -1094,7 +1109,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
int retval;
NOTICE(rt2x00dev, "Waking up.\n");
- __set_bit(INTERFACE_RESUME, &rt2x00dev->flags);
+ __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
/*
* Open the debugfs entry.
@@ -1102,6 +1117,12 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
rt2x00debug_register(rt2x00dev);
/*
+ * Only continue if mac80211 has open interfaces.
+ */
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ return 0;
+
+ /*
* Reinitialize device and all active interfaces.
*/
retval = rt2x00mac_start(rt2x00dev->hw);
@@ -1111,15 +1132,23 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Reconfigure device.
*/
- retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
- if (retval)
- goto exit;
+ rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
+ if (!rt2x00dev->hw->conf.radio_enabled)
+ rt2x00lib_disable_radio(rt2x00dev);
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
rt2x00lib_config_type(rt2x00dev, intf->type);
/*
+ * It is possible that during that mac80211 has attempted
+ * to send frames while we were suspending or resuming.
+ * In that case we have disabled the TX queue and should
+ * now enable it again
+ */
+ ieee80211_start_queues(rt2x00dev->hw);
+
+ /*
* When in Master or Ad-hoc mode,
* restart Beacon transmitting by faking a beacondone event.
*/
@@ -1127,8 +1156,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
intf->type == IEEE80211_IF_TYPE_IBSS)
rt2x00lib_beacondone(rt2x00dev);
- __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags);
-
return 0;
exit:
@@ -1136,8 +1163,6 @@ exit:
rt2x00lib_uninitialize(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
- __clear_bit(INTERFACE_RESUME, &rt2x00dev->flags);
-
return retval;
}
EXPORT_SYMBOL_GPL(rt2x00lib_resume);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index fcc2ffd..6dd92eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -52,7 +52,8 @@ void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac);
void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid);
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, int type);
-void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf);
+void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf, const int force_config);
/*
* Firmware handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 17802f6..e98d013a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -82,6 +82,17 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
u16 frame_control;
/*
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
+ * Note that we can only stop the TX queues inside the TX path
+ * due to possible race conditions in mac80211.
+ */
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
+ ieee80211_stop_queues(hw);
+ return 0;
+ }
+
+ /*
* Determine which ring to put packet on.
*/
ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
@@ -126,14 +137,15 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
struct rt2x00_dev *rt2x00dev = hw->priv;
int status;
- if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+ test_bit(DEVICE_STARTED, &rt2x00dev->flags))
return 0;
/*
* If this is the first interface which is added,
* we should load the firmware now.
*/
- if (test_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
+ if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
status = rt2x00lib_load_firmware(rt2x00dev);
if (status)
return status;
@@ -155,6 +167,8 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
return status;
}
+ __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_start);
@@ -163,11 +177,16 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+ return;
+
/*
* Perhaps we can add something smarter here,
* but for now just disabling the radio should do.
*/
rt2x00lib_disable_radio(rt2x00dev);
+
+ __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
}
EXPORT_SYMBOL_GPL(rt2x00mac_stop);
@@ -178,9 +197,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct interface *intf = &rt2x00dev->interface;
/*
- * We only support 1 non-monitor interface.
+ * Don't allow interfaces to be added while
+ * either the device has disappeared or when
+ * another interface is already present.
*/
- if (is_interface_present(intf))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+ is_interface_present(intf))
return -ENOBUFS;
intf->id = conf->if_id;
@@ -208,9 +230,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
struct interface *intf = &rt2x00dev->interface;
/*
- * We only support 1 non-monitor interface.
+ * Don't allow interfaces to be remove while
+ * either the device has disappeared or when
+ * no interface is present.
*/
- if (!is_interface_present(intf))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+ !is_interface_present(intf))
return;
intf->id = 0;
@@ -233,12 +258,10 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
struct rt2x00_dev *rt2x00dev = hw->priv;
/*
- * If the device is not initialized we shouldn't accept
- * any configuration changes. Mac80211 might be calling
- * this function while we are trying to remove the device
- * or perhaps suspending it.
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
/*
@@ -252,7 +275,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
rt2x00lib_toggle_rx(rt2x00dev, 0);
}
- rt2x00lib_config(rt2x00dev, conf);
+ rt2x00lib_config(rt2x00dev, conf, 0);
/*
* Reenable RX only if the radio should be on.
@@ -274,12 +297,10 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
int status;
/*
- * If the device is not initialized we shouldn't accept
- * any configuration changes. Mac80211 might be calling
- * this function while we are trying to remove the device
- * or perhaps suspending it.
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
*/
- if (!test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index b54457c..06af014 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -45,9 +45,9 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
return 0;
/*
- * Only continue if we have an active interface.
+ * Only continue if there are enabled interfaces.
*/
- if (!is_interface_present(&rt2x00dev->interface))
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
return 0;
if (state == RFKILL_STATE_ON) {
@@ -76,7 +76,7 @@ int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
int retval;
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return 0;
retval = rfkill_register(rt2x00dev->rfkill);
@@ -97,7 +97,7 @@ int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
input_unregister_polled_device(rt2x00dev->poll_dev);
@@ -108,7 +108,7 @@ int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
{
struct device *device = wiphy_dev(rt2x00dev->hw->wiphy);
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return 0;
rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN);
@@ -138,7 +138,7 @@ int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
- if (!test_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+ if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
return;
input_free_polled_device(rt2x00dev->poll_dev);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 3edcd74..4c5e317 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2105,7 +2105,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
- __set_bit(DEVICE_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
/*
* Read frequency offset and RF programming sequence.
@@ -2360,7 +2360,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires firmware
*/
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index b18cc93..ffed3ec 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1827,7 +1827,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* This device requires firmware
*/
- __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
/*
* Set the rssi offset.
OpenPOWER on IntegriCloud