Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 716 insertions, 0 deletions

diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
new file mode 100644
index 0000000..509ff22
--- /dev/null
+++ b/drivers/net/wireless/wavelan.p.h
@@ -0,0 +1,716 @@
+/*
+ *	WaveLAN ISA driver
+ *
+ *		Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ *
+ * This file contains all definitions and declarations necessary for the
+ * WaveLAN ISA driver.  This file is a private header, so it should
+ * be included only in wavelan.c!
+ */
+
+#ifndef WAVELAN_P_H
+#define WAVELAN_P_H
+
+/************************** DOCUMENTATION ***************************/
+/*
+ * This driver provides a Linux interface to the WaveLAN ISA hardware.
+ * The WaveLAN is a product of Lucent (http://www.wavelan.com/).
+ * This division was formerly part of NCR and then AT&T.
+ * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean.
+ *
+ * To learn how to use this driver, read the NET3 HOWTO.
+ * If you want to exploit the many other functionalities, read the comments
+ * in the code.
+ *
+ * This driver is the result of the effort of many people (see below).
+ */
+
+/* ------------------------ SPECIFIC NOTES ------------------------ */
+/*
+ * Web page
+ * --------
+ *	I try to maintain a web page with the Wireless LAN Howto at :
+ *	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
+ *
+ * SMP
+ * ---
+ *	We now are SMP compliant (I eventually fixed the remaining bugs).
+ *	The driver has been tested on a dual P6-150 and survived my usual
+ *	set of torture tests.
+ *	Anyway, I spent enough time chasing interrupt re-entrancy during
+ *	errors or reconfigure, and I designed the locked/unlocked sections
+ *	of the driver with great care, and with the recent addition of
+ *	the spinlock (thanks to the new API), we should be quite close to
+ *	the truth.
+ *	The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
+ *	but better safe than sorry (especially at 2 Mb/s ;-).
+ *
+ *	I have also looked into disabling only our interrupt on the card
+ *	(via HACR) instead of all interrupts in the processor (via cli),
+ *	so that other driver are not impacted, and it look like it's
+ *	possible, but it's very tricky to do right (full of races). As
+ *	the gain would be mostly for SMP systems, it can wait...
+ *
+ * Debugging and options
+ * ---------------------
+ *	You will find below a set of '#define" allowing a very fine control
+ *	on the driver behaviour and the debug messages printed.
+ *	The main options are :
+ *	o SET_PSA_CRC, to have your card correctly recognised by
+ *	  an access point and the Point-to-Point diagnostic tool.
+ *	o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
+ *	  (otherwise we always start afresh with some defaults)
+ *
+ * wavelan.o is too darned big
+ * ---------------------------
+ *	That's true!  There is a very simple way to reduce the driver
+ *	object by 33%!  Comment out the following line:
+ *		#include <linux/wireless.h>
+ *	Other compile options can also reduce the size of it...
+ *
+ * MAC address and hardware detection:
+ * -----------------------------------
+ *	The detection code for the WaveLAN checks that the first three
+ *	octets of the MAC address fit the company code.  This type of
+ *	detection works well for AT&T cards (because the AT&T code is
+ *	hardcoded in wavelan.h), but of course will fail for other
+ *	manufacturers.
+ *
+ *	If you are sure that your card is derived from the WaveLAN,
+ *	here is the way to configure it:
+ *	1) Get your MAC address
+ *		a) With your card utilities (wfreqsel, instconf, etc.)
+ *		b) With the driver:
+ *			o compile the kernel with DEBUG_CONFIG_INFO enabled
+ *			o Boot and look the card messages
+ *	2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
+ *	3) Compile and verify
+ *	4) Send me the MAC code.  I will include it in the next version.
+ *
+ */
+
+/* --------------------- WIRELESS EXTENSIONS --------------------- */
+/*
+ * This driver is the first to support "wireless extensions".
+ * This set of extensions provides a standard way to control the wireless
+ * characteristics of the hardware.  Applications such as mobile IP may
+ * take advantage of it.
+ *
+ * You will need to enable the CONFIG_NET_RADIO define in the kernel
+ * configuration to enable the wireless extensions (this is the one
+ * giving access to the radio network device choice).
+ *
+ * It might also be a good idea as well to fetch the wireless tools to
+ * configure the device and play a bit.
+ */
+
+/* ---------------------------- FILES ---------------------------- */
+/*
+ * wavelan.c:		actual code for the driver:  C functions
+ *
+ * wavelan.p.h:		private header:  local types and variables for driver
+ *
+ * wavelan.h:		description of the hardware interface and structs
+ *
+ * i82586.h:		description of the Ethernet controller
+ */
+
+/* --------------------------- HISTORY --------------------------- */
+/*
+ * This is based on information in the drivers' headers. It may not be
+ * accurate, and I guarantee only my best effort.
+ *
+ * The history of the WaveLAN drivers is as complicated as the history of
+ * the WaveLAN itself (NCR -> AT&T -> Lucent).
+ *
+ * It all started with Anders Klemets <klemets@paul.rutgers.edu>
+ * writing a WaveLAN ISA driver for the Mach microkernel.  Girish
+ * Welling <welling@paul.rutgers.edu> had also worked on it.
+ * Keith Moore modified this for the PCMCIA hardware.
+ * 
+ * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI
+ * and added specific PCMCIA support (there is currently no equivalent
+ * of the PCMCIA package under BSD).
+ *
+ * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD.
+ *
+ * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux.
+ *
+ * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver
+ * (with help of the BSDI PCMCIA driver) for PCMCIA.
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work.
+ * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
+ * 2.00 cards correctly (2.4 GHz with frequency selection).
+ * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
+ * PCMCIA package (and bug corrections).
+ *
+ * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
+ * patches to the PCMCIA driver.  Later, I added code in the ISA driver
+ * for Wireless Extensions and full support of frequency selection
+ * cards.  Then, I did the same to the PCMCIA driver, and did some
+ * reorganisation.  Finally, I came back to the ISA driver to
+ * upgrade it at the same level as the PCMCIA one and reorganise
+ * the code.
+ * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
+ * much needed information on the WaveLAN hardware.
+ */
+
+/* The original copyrights and literature mention others' names and
+ * credits.  I don't know what their part in this development was.
+ */
+
+/* By the way, for the copyright and legal stuff:
+ * almost everybody wrote code under the GNU or BSD license (or similar),
+ * and want their original copyright to remain somewhere in the
+ * code (for myself, I go with the GPL).
+ * Nobody wants to take responsibility for anything, except the fame.
+ */
+
+/* --------------------------- CREDITS --------------------------- */
+/*
+ * This software was developed as a component of the
+ * Linux operating system.
+ * It is based on other device drivers and information
+ * either written or supplied by:
+ *	Ajay Bakre <bakre@paul.rutgers.edu>,
+ *	Donald Becker <becker@cesdis.gsfc.nasa.gov>,
+ *	Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>,
+ *	Brent Elphick <belphick@uwaterloo.ca>,
+ *	Anders Klemets <klemets@it.kth.se>,
+ *	Vladimir V. Kolpakov <w@stier.koenig.ru>,
+ *	Marc Meertens <Marc.Meertens@Utrecht.NCR.com>,
+ *	Pauline Middelink <middelin@polyware.iaf.nl>,
+ *	Robert Morris <rtm@das.harvard.edu>,
+ *	Jean Tourrilhes <jt@hpl.hp.com>,
+ *	Girish Welling <welling@paul.rutgers.edu>,
+ *	Clark Woodworth <clark@hiway1.exit109.com>
+ *	Yongguang Zhang <ygz@isl.hrl.hac.com>
+ *
+ * Thanks go also to:
+ *	James Ashton <jaa101@syseng.anu.edu.au>,
+ *	Alan Cox <alan@redhat.com>,
+ *	Allan Creighton <allanc@cs.usyd.edu.au>,
+ *	Matthew Geier <matthew@cs.usyd.edu.au>,
+ *	Remo di Giovanni <remo@cs.usyd.edu.au>,
+ *	Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>,
+ *	Vipul Gupta <vgupta@cs.binghamton.edu>,
+ *	Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>,
+ *	Tim Nicholson <tim@cs.usyd.edu.au>,
+ *	Ian Parkin <ian@cs.usyd.edu.au>,
+ *	John Rosenberg <johnr@cs.usyd.edu.au>,
+ *	George Rossi <george@phm.gov.au>,
+ *	Arthur Scott <arthur@cs.usyd.edu.au>,
+ *	Stanislav Sinyagin <stas@isf.ru>
+ *	and Peter Storey for their assistance and advice.
+ *
+ * Additional Credits:
+ *
+ *	My development has been done initially under Debian 1.1 (Linux 2.0.x)
+ *	and now	under Debian 2.2, initially with an HP Vectra XP/60, and now
+ *	an HP Vectra XP/90.
+ *
+ */
+
+/* ------------------------- IMPROVEMENTS ------------------------- */
+/*
+ * I proudly present:
+ *
+ * Changes made in first pre-release:
+ * ----------------------------------
+ *	- reorganisation of the code, function name change
+ *	- creation of private header (wavelan.p.h)
+ *	- reorganised debug messages
+ *	- more comments, history, etc.
+ *	- mmc_init:  configure the PSA if not done
+ *	- mmc_init:  correct default value of level threshold for PCMCIA
+ *	- mmc_init:  2.00 detection better code for 2.00 initialization
+ *	- better info at startup
+ *	- IRQ setting (note:  this setting is permanent)
+ *	- watchdog:  change strategy (and solve module removal problems)
+ *	- add wireless extensions (ioctl and get_wireless_stats)
+ *	  get/set nwid/frequency on fly, info for /proc/net/wireless
+ *	- more wireless extensions:  SETSPY and GETSPY
+ *	- make wireless extensions optional
+ *	- private ioctl to set/get quality and level threshold, histogram
+ *	- remove /proc/net/wavelan
+ *	- suppress useless stuff from lp (net_local)
+ *	- kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
+ *	- add message level (debug stuff in /var/adm/debug and errors not
+ *	  displayed at console and still in /var/adm/messages)
+ *	- multi device support
+ *	- start fixing the probe (init code)
+ *	- more inlines
+ *	- man page
+ *	- many other minor details and cleanups
+ *
+ * Changes made in second pre-release:
+ * -----------------------------------
+ *	- clean up init code (probe and module init)
+ *	- better multiple device support (module)
+ *	- name assignment (module)
+ *
+ * Changes made in third pre-release:
+ * ----------------------------------
+ *	- be more conservative on timers
+ *	- preliminary support for multicast (I still lack some details)
+ *
+ * Changes made in fourth pre-release:
+ * -----------------------------------
+ *	- multicast (revisited and finished)
+ *	- avoid reset in set_multicast_list (a really big hack)
+ *	  if somebody could apply this code for other i82586 based drivers
+ *	- share onboard memory 75% RU and 25% CU (instead of 50/50)
+ *
+ * Changes made for release in 2.1.15:
+ * -----------------------------------
+ *	- change the detection code for multi manufacturer code support
+ *
+ * Changes made for release in 2.1.17:
+ * -----------------------------------
+ *	- update to wireless extensions changes
+ *	- silly bug in card initial configuration (psa_conf_status)
+ *
+ * Changes made for release in 2.1.27 & 2.0.30:
+ * --------------------------------------------
+ *	- small bug in debug code (probably not the last one...)
+ *	- remove extern keyword for wavelan_probe()
+ *	- level threshold is now a standard wireless extension (version 4 !)
+ *	- modules parameters types (new module interface)
+ *
+ * Changes made for release in 2.1.36:
+ * -----------------------------------
+ *	- byte count stats (courtesy of David Hinds)
+ *	- remove dev_tint stuff (courtesy of David Hinds)
+ *	- encryption setting from Brent Elphick (thanks a lot!)
+ *	- 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
+ *
+ * Other changes (not by me) :
+ * -------------------------
+ *	- Spelling and gramar "rectification".
+ *
+ * Changes made for release in 2.0.37 & 2.2.2 :
+ * ------------------------------------------
+ *	- Correct status in /proc/net/wireless
+ *	- Set PSA CRC to make PtP diagnostic tool happy (Bob Gray)
+ *	- Module init code don't fail if we found at least one card in
+ *	  the address list (Karlis Peisenieks)
+ *	- Missing parenthesis (Christopher Peterson)
+ *	- Correct i82586 configuration parameters
+ *	- Encryption initialisation bug (Robert McCormack)
+ *	- New mac addresses detected in the probe
+ *	- Increase watchdog for busy environments
+ *
+ * Changes made for release in 2.0.38 & 2.2.7 :
+ * ------------------------------------------
+ *	- Correct the reception logic to better report errors and avoid
+ *	  sending bogus packet up the stack
+ *	- Delay RU config to avoid corrupting first received packet
+ *	- Change config completion code (to actually check something)
+ *	- Avoid reading out of bound in skbuf to transmit
+ *	- Rectify a lot of (useless) debugging code
+ *	- Change the way to `#ifdef SET_PSA_CRC'
+ *
+ * Changes made for release in 2.2.11 & 2.3.13 :
+ * -------------------------------------------
+ *	- Change e-mail and web page addresses
+ *	- Watchdog timer is now correctly expressed in HZ, not in jiffies
+ *	- Add channel number to the list of frequencies in range
+ *	- Add the (short) list of bit-rates in range
+ *	- Developp a new sensitivity... (sens.value & sens.fixed)
+ *
+ * Changes made for release in 2.2.14 & 2.3.23 :
+ * -------------------------------------------
+ *	- Fix check for root permission (break instead of exit)
+ *	- New nwid & encoding setting (Wireless Extension 9)
+ *
+ * Changes made for release in 2.3.49 :
+ * ----------------------------------
+ *	- Indentation reformating (Alan)
+ *	- Update to new network API (softnet - 2.3.43) :
+ *		o replace dev->tbusy (Alan)
+ *		o replace dev->tstart (Alan)
+ *		o remove dev->interrupt (Alan)
+ *		o add SMP locking via spinlock in splxx (me)
+ *		o add spinlock in interrupt handler (me)
+ *		o use kernel watchdog instead of ours (me)
+ *		o increase watchdog timeout (kernel is more sensitive) (me)
+ *		o verify that all the changes make sense and work (me)
+ *	- Fixup a potential gotcha when reconfiguring and thighten a bit
+ *		the interactions with Tx queue.
+ *
+ * Changes made for release in 2.4.0 :
+ * ---------------------------------
+ *	- Fix spinlock stupid bugs that I left in. The driver is now SMP
+ *		compliant and doesn't lockup at startup.
+ *
+ * Changes made for release in 2.5.2 :
+ * ---------------------------------
+ *	- Use new driver API for Wireless Extensions :
+ *		o got rid of wavelan_ioctl()
+ *		o use a bunch of iw_handler instead
+ *
+ * Changes made for release in 2.5.35 :
+ * ----------------------------------
+ *	- Set dev->trans_start to avoid filling the logs
+ *	- Handle better spurious/bogus interrupt
+ *	- Avoid deadlocks in mmc_out()/mmc_in()
+ *
+ * Wishes & dreams:
+ * ----------------
+ *	- roaming (see Pcmcia driver)
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include	<linux/module.h>
+
+#include	<linux/kernel.h>
+#include	<linux/sched.h>
+#include	<linux/types.h>
+#include	<linux/fcntl.h>
+#include	<linux/interrupt.h>
+#include	<linux/stat.h>
+#include	<linux/ptrace.h>
+#include	<linux/ioport.h>
+#include	<linux/in.h>
+#include	<linux/string.h>
+#include	<linux/delay.h>
+#include	<linux/bitops.h>
+#include	<asm/system.h>
+#include	<asm/io.h>
+#include	<asm/dma.h>
+#include	<asm/uaccess.h>
+#include	<linux/errno.h>
+#include	<linux/netdevice.h>
+#include	<linux/etherdevice.h>
+#include	<linux/skbuff.h>
+#include	<linux/slab.h>
+#include	<linux/timer.h>
+#include	<linux/init.h>
+
+#include <linux/wireless.h>		/* Wireless extensions */
+#include <net/iw_handler.h>		/* Wireless handlers */
+
+/* WaveLAN declarations */
+#include	"i82586.h"
+#include	"wavelan.h"
+
+/************************** DRIVER OPTIONS **************************/
+/*
+ * `#define' or `#undef' the following constant to change the behaviour
+ * of the driver...
+ */
+#undef SET_PSA_CRC		/* Calculate and set the CRC on PSA (slower) */
+#define USE_PSA_CONFIG		/* Use info from the PSA. */
+#undef STRUCT_CHECK		/* Verify padding of structures. */
+#undef EEPROM_IS_PROTECTED	/* doesn't seem to be necessary */
+#define MULTICAST_AVOID		/* Avoid extra multicast (I'm sceptical). */
+#undef SET_MAC_ADDRESS		/* Experimental */
+
+#ifdef WIRELESS_EXT	/* If wireless extensions exist in the kernel */
+/* Warning:  this stuff will slow down the driver. */
+#define WIRELESS_SPY		/* Enable spying addresses. */
+#undef HISTOGRAM		/* Enable histogram of signal level. */
+#endif
+
+/****************************** DEBUG ******************************/
+
+#undef DEBUG_MODULE_TRACE	/* module insertion/removal */
+#undef DEBUG_CALLBACK_TRACE	/* calls made by Linux */
+#undef DEBUG_INTERRUPT_TRACE	/* calls to handler */
+#undef DEBUG_INTERRUPT_INFO	/* type of interrupt and so on */
+#define DEBUG_INTERRUPT_ERROR	/* problems */
+#undef DEBUG_CONFIG_TRACE	/* Trace the config functions. */
+#undef DEBUG_CONFIG_INFO	/* what's going on */
+#define DEBUG_CONFIG_ERROR	/* errors on configuration */
+#undef DEBUG_TX_TRACE		/* transmission calls */
+#undef DEBUG_TX_INFO		/* header of the transmitted packet */
+#undef DEBUG_TX_FAIL		/* Normal failure conditions */
+#define DEBUG_TX_ERROR		/* Unexpected conditions */
+#undef DEBUG_RX_TRACE		/* transmission calls */
+#undef DEBUG_RX_INFO		/* header of the received packet */
+#undef DEBUG_RX_FAIL		/* Normal failure conditions */
+#define DEBUG_RX_ERROR		/* Unexpected conditions */
+
+#undef DEBUG_PACKET_DUMP	/* Dump packet on the screen if defined to 32. */
+#undef DEBUG_IOCTL_TRACE	/* misc. call by Linux */
+#undef DEBUG_IOCTL_INFO		/* various debugging info */
+#define DEBUG_IOCTL_ERROR	/* what's going wrong */
+#define DEBUG_BASIC_SHOW	/* Show basic startup info. */
+#undef DEBUG_VERSION_SHOW	/* Print version info. */
+#undef DEBUG_PSA_SHOW		/* Dump PSA to screen. */
+#undef DEBUG_MMC_SHOW		/* Dump mmc to screen. */
+#undef DEBUG_SHOW_UNUSED	/* Show unused fields too. */
+#undef DEBUG_I82586_SHOW	/* Show i82586 status. */
+#undef DEBUG_DEVICE_SHOW	/* Show device parameters. */
+
+/************************ CONSTANTS & MACROS ************************/
+
+#ifdef DEBUG_VERSION_SHOW
+static const char	*version	= "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n";
+#endif
+
+/* Watchdog temporisation */
+#define	WATCHDOG_JIFFIES	(512*HZ/100)
+
+/* Macro to get the number of elements in an array */
+#define	NELS(a)				(sizeof(a) / sizeof(a[0]))
+
+/* ------------------------ PRIVATE IOCTL ------------------------ */
+
+#define SIOCSIPQTHR	SIOCIWFIRSTPRIV		/* Set quality threshold */
+#define SIOCGIPQTHR	SIOCIWFIRSTPRIV + 1	/* Get quality threshold */
+
+#define SIOCSIPHISTO	SIOCIWFIRSTPRIV + 2	/* Set histogram ranges */
+#define SIOCGIPHISTO	SIOCIWFIRSTPRIV + 3	/* Get histogram values */
+
+/****************************** TYPES ******************************/
+
+/* Shortcuts */
+typedef struct net_device_stats	en_stats;
+typedef struct iw_statistics	iw_stats;
+typedef struct iw_quality	iw_qual;
+typedef struct iw_freq		iw_freq;
+typedef struct net_local	net_local;
+typedef struct timer_list	timer_list;
+
+/* Basic types */
+typedef u_char		mac_addr[WAVELAN_ADDR_SIZE];	/* Hardware address */
+
+/*
+ * Static specific data for the interface.
+ *
+ * For each network interface, Linux keeps data in two structures:  "device"
+ * keeps the generic data (same format for everybody) and "net_local" keeps
+ * additional specific data.
+ * Note that some of this specific data is in fact generic (en_stats, for
+ * example).
+ */
+struct net_local
+{
+  net_local *	next;		/* linked list of the devices */
+  struct net_device *	dev;		/* reverse link */
+  spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
+  en_stats	stats;		/* Ethernet interface statistics */
+  int		nresets;	/* number of hardware resets */
+  u_char	reconfig_82586;	/* We need to reconfigure the controller. */
+  u_char	promiscuous;	/* promiscuous mode */
+  int		mc_count;	/* number of multicast addresses */
+  u_short	hacr;		/* current host interface state */
+
+  int		tx_n_in_use;
+  u_short	rx_head;
+  u_short	rx_last;
+  u_short	tx_first_free;
+  u_short	tx_first_in_use;
+
+#ifdef WIRELESS_EXT
+  iw_stats	wstats;		/* Wireless-specific statistics */
+
+  struct iw_spy_data	spy_data;
+  struct iw_public_data	wireless_data;
+#endif
+
+#ifdef HISTOGRAM
+  int		his_number;		/* number of intervals */
+  u_char	his_range[16];		/* boundaries of interval ]n-1; n] */
+  u_long	his_sum[16];		/* sum in interval */
+#endif	/* HISTOGRAM */
+};
+
+/**************************** PROTOTYPES ****************************/
+
+/* ----------------------- MISC. SUBROUTINES ------------------------ */
+static u_char
+	wv_irq_to_psa(int);
+static int
+	wv_psa_to_irq(u_char);
+/* ------------------- HOST ADAPTER SUBROUTINES ------------------- */
+static inline u_short		/* data */
+	hasr_read(u_long);	/* Read the host interface:  base address */
+static inline void
+	hacr_write(u_long,	/* Write to host interface:  base address */
+		   u_short),	/* data */
+	hacr_write_slow(u_long,
+		   u_short),
+	set_chan_attn(u_long,	/* ioaddr */
+		      u_short),	/* hacr   */
+	wv_hacr_reset(u_long),	/* ioaddr */
+	wv_16_off(u_long,	/* ioaddr */
+		  u_short),	/* hacr   */
+	wv_16_on(u_long,	/* ioaddr */
+		 u_short),	/* hacr   */
+	wv_ints_off(struct net_device *),
+	wv_ints_on(struct net_device *);
+/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
+static void
+	psa_read(u_long,	/* Read the Parameter Storage Area. */
+		 u_short,	/* hacr */
+		 int,		/* offset in PSA */
+		 u_char *,	/* buffer to fill */
+		 int),		/* size to read */
+	psa_write(u_long, 	/* Write to the PSA. */
+		  u_short,	/* hacr */
+		  int,		/* offset in PSA */
+		  u_char *,	/* buffer in memory */
+		  int);		/* length of buffer */
+static inline void
+	mmc_out(u_long,		/* Write 1 byte to the Modem Manag Control. */
+		u_short,
+		u_char),
+	mmc_write(u_long,	/* Write n bytes to the MMC. */
+		  u_char,
+		  u_char *,
+		  int);
+static inline u_char		/* Read 1 byte from the MMC. */
+	mmc_in(u_long,
+	       u_short);
+static inline void
+	mmc_read(u_long,	/* Read n bytes from the MMC. */
+		 u_char,
+		 u_char *,
+		 int),
+	fee_wait(u_long,	/* Wait for frequency EEPROM:  base address */
+		 int,		/* base delay to wait for */
+		 int);		/* time to wait */
+static void
+	fee_read(u_long,	/* Read the frequency EEPROM:  base address */
+		 u_short,	/* destination offset */
+		 u_short *,	/* data buffer */
+		 int);		/* number of registers */
+/* ---------------------- I82586 SUBROUTINES ----------------------- */
+static /*inline*/ void
+	obram_read(u_long,	/* ioaddr */
+		   u_short,	/* o */
+		   u_char *,	/* b */
+		   int);	/* n */
+static inline void
+	obram_write(u_long,	/* ioaddr */
+		    u_short,	/* o */
+		    u_char *,	/* b */
+		    int);	/* n */
+static void
+	wv_ack(struct net_device *);
+static inline int
+	wv_synchronous_cmd(struct net_device *,
+			   const char *),
+	wv_config_complete(struct net_device *,
+			   u_long,
+			   net_local *);
+static int
+	wv_complete(struct net_device *,
+		    u_long,
+		    net_local *);
+static inline void
+	wv_82586_reconfig(struct net_device *);
+/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
+#ifdef DEBUG_I82586_SHOW
+static void
+	wv_scb_show(unsigned short);
+#endif
+static inline void
+	wv_init_info(struct net_device *);	/* display startup info */
+/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
+static en_stats	*
+	wavelan_get_stats(struct net_device *);	/* Give stats /proc/net/dev */
+static iw_stats *
+	wavelan_get_wireless_stats(struct net_device *);
+static void
+	wavelan_set_multicast_list(struct net_device *);
+/* ----------------------- PACKET RECEPTION ----------------------- */
+static inline void
+	wv_packet_read(struct net_device *,	/* Read a packet from a frame. */
+		       u_short,
+		       int),
+	wv_receive(struct net_device *);	/* Read all packets waiting. */
+/* --------------------- PACKET TRANSMISSION --------------------- */
+static inline int
+	wv_packet_write(struct net_device *,	/* Write a packet to the Tx buffer. */
+			void *,
+			short);
+static int
+	wavelan_packet_xmit(struct sk_buff *,	/* Send a packet. */
+			    struct net_device *);
+/* -------------------- HARDWARE CONFIGURATION -------------------- */
+static inline int
+	wv_mmc_init(struct net_device *),	/* Initialize the modem. */
+	wv_ru_start(struct net_device *),	/* Start the i82586 receiver unit. */
+	wv_cu_start(struct net_device *),	/* Start the i82586 command unit. */
+	wv_82586_start(struct net_device *);	/* Start the i82586. */
+static void
+	wv_82586_config(struct net_device *);	/* Configure the i82586. */
+static inline void
+	wv_82586_stop(struct net_device *);
+static int
+	wv_hw_reset(struct net_device *),	/* Reset the WaveLAN hardware. */
+	wv_check_ioaddr(u_long,		/* ioaddr */
+			u_char *);	/* mac address (read) */
+/* ---------------------- INTERRUPT HANDLING ---------------------- */
+static irqreturn_t
+	wavelan_interrupt(int,		/* interrupt handler */
+			  void *,
+			  struct pt_regs *);
+static void
+	wavelan_watchdog(struct net_device *);	/* transmission watchdog */
+/* ------------------- CONFIGURATION CALLBACKS ------------------- */
+static int
+	wavelan_open(struct net_device *),	/* Open the device. */
+	wavelan_close(struct net_device *),	/* Close the device. */
+	wavelan_config(struct net_device *, unsigned short);/* Configure one device. */
+extern struct net_device *wavelan_probe(int unit);	/* See Space.c. */
+
+/**************************** VARIABLES ****************************/
+
+/*
+ * This is the root of the linked list of WaveLAN drivers
+ * It is use to verify that we don't reuse the same base address
+ * for two different drivers and to clean up when removing the module.
+ */
+static net_local *	wavelan_list	= (net_local *) NULL;
+
+/*
+ * This table is used to translate the PSA value to IRQ number
+ * and vice versa.
+ */
+static u_char	irqvals[]	=
+{
+	   0,    0,    0, 0x01,
+	0x02, 0x04,    0, 0x08,
+	   0,    0, 0x10, 0x20,
+	0x40,    0,    0, 0x80,
+};
+
+/*
+ * Table of the available I/O addresses (base addresses) for WaveLAN
+ */
+static unsigned short	iobase[]	=
+{
+#if	0
+  /* Leave out 0x3C0 for now -- seems to clash with some video
+   * controllers.
+   * Leave out the others too -- we will always use 0x390 and leave
+   * 0x300 for the Ethernet device.
+   * Jean II:  0x3E0 is fine as well.
+   */
+  0x300, 0x390, 0x3E0, 0x3C0
+#endif	/* 0 */
+  0x390, 0x3E0
+};
+
+#ifdef	MODULE
+/* Parameters set by insmod */
+static int	io[4];
+static int	irq[4];
+static char	*name[4];
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(name, charp, NULL, 0);
+
+MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required");
+MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)");
+MODULE_PARM_DESC(name, "WaveLAN interface neme(s)");
+#endif	/* MODULE */
+
+#endif	/* WAVELAN_P_H */