Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) GRE now works over ipv6, from Dmitry Kozlov.

 2) Make SCTP more network namespace aware, from Eric Biederman.

 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.

 4) Make openvswitch network namespace aware, from Pravin B Shelar.

 5) IPV6 NAT implementation, from Patrick McHardy.

 6) Server side support for TCP Fast Open, from Jerry Chu and others.

 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
    Borkmann.

 8) Increate the loopback default MTU to 64K, from Eric Dumazet.

 9) Use a per-task rather than per-socket page fragment allocator for
    outgoing networking traffic.  This benefits processes that have very
    many mostly idle sockets, which is quite common.

    From Eric Dumazet.

10) Use up to 32K for page fragment allocations, with fallbacks to
    smaller sizes when higher order page allocations fail.  Benefits are
    a) less segments for driver to process b) less calls to page
    allocator c) less waste of space.

    From Eric Dumazet.

11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.

12) VXLAN device driver, one way to handle VLAN issues such as the
    limitation of 4096 VLAN IDs yet still have some level of isolation.
    From Stephen Hemminger.

13) As usual there is a large boatload of driver changes, with the scale
    perhaps tilted towards the wireless side this time around.

Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
  hyperv: Add buffer for extended info after the RNDIS response message.
  hyperv: Report actual status in receive completion packet
  hyperv: Remove extra allocated space for recv_pkt_list elements
  hyperv: Fix page buffer handling in rndis_filter_send_request()
  hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
  hyperv: Fix the max_xfer_size in RNDIS initialization
  vxlan: put UDP socket in correct namespace
  vxlan: Depend on CONFIG_INET
  sfc: Fix the reported priorities of different filter types
  sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
  sfc: Fix loopback self-test with separate_tx_channels=1
  sfc: Fix MCDI structure field lookup
  sfc: Add parentheses around use of bitfield macro arguments
  sfc: Fix null function pointer in efx_sriov_channel_type
  vxlan: virtual extensible lan
  igmp: export symbol ip_mc_leave_group
  netlink: add attributes to fdb interface
  tg3: unconditionally select HWMON support when tg3 is enabled.
  Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
  gre: fix sparse warning
  ...

1 files changed, 60 insertions, 69 deletions

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 69042bb..a39682a 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -30,7 +30,6 @@
 #include "../wlcore/acx.h"
 #include "../wlcore/tx.h"
 #include "../wlcore/rx.h"
-#include "../wlcore/io.h"
 #include "../wlcore/boot.h"
 
 #include "reg.h"
@@ -46,7 +45,6 @@
 static char *ht_mode_param = NULL;
 static char *board_type_param = NULL;
 static bool checksum_param = false;
-static bool enable_11a_param = true;
 static int num_rx_desc_param = -1;
 
 /* phy paramters */
@@ -416,7 +414,7 @@ static struct wlcore_conf wl18xx_conf = {
 		.snr_threshold			= 0,
 	},
 	.ht = {
-		.rx_ba_win_size = 10,
+		.rx_ba_win_size = 32,
 		.tx_ba_win_size = 64,
 		.inactivity_timeout = 10000,
 		.tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP,
@@ -506,8 +504,8 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 		.rdl				= 0x01,
 		.auto_detect			= 0x00,
 		.dedicated_fem			= FEM_NONE,
-		.low_band_component		= COMPONENT_2_WAY_SWITCH,
-		.low_band_component_type	= 0x06,
+		.low_band_component		= COMPONENT_3_WAY_SWITCH,
+		.low_band_component_type	= 0x04,
 		.high_band_component		= COMPONENT_2_WAY_SWITCH,
 		.high_band_component_type	= 0x09,
 		.tcxo_ldo_voltage		= 0x00,
@@ -813,6 +811,13 @@ static int wl18xx_enable_interrupts(struct wl1271 *wl)
 
 	ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
 			       WL1271_ACX_INTR_ALL & ~intr_mask);
+	if (ret < 0)
+		goto disable_interrupts;
+
+	return ret;
+
+disable_interrupts:
+	wlcore_disable_interrupts(wl);
 
 out:
 	return ret;
@@ -1203,6 +1208,12 @@ static int wl18xx_handle_static_data(struct wl1271 *wl,
 	struct wl18xx_static_data_priv *static_data_priv =
 		(struct wl18xx_static_data_priv *) static_data->priv;
 
+	strncpy(wl->chip.phy_fw_ver_str, static_data_priv->phy_version,
+		sizeof(wl->chip.phy_fw_ver_str));
+
+	/* make sure the string is NULL-terminated */
+	wl->chip.phy_fw_ver_str[sizeof(wl->chip.phy_fw_ver_str) - 1] = '\0';
+
 	wl1271_info("PHY firmware version: %s", static_data_priv->phy_version);
 
 	return 0;
@@ -1241,13 +1252,6 @@ static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 	if (!change_spare)
 		return wlcore_set_key(wl, cmd, vif, sta, key_conf);
 
-	/*
-	 * stop the queues and flush to ensure the next packets are
-	 * in sync with FW spare block accounting
-	 */
-	wlcore_stop_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK);
-	wl1271_tx_flush(wl);
-
 	ret = wlcore_set_key(wl, cmd, vif, sta, key_conf);
 	if (ret < 0)
 		goto out;
@@ -1270,7 +1274,6 @@ static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 	}
 
 out:
-	wlcore_wake_queues(wl, WLCORE_QUEUE_STOP_REASON_SPARE_BLK);
 	return ret;
 }
 
@@ -1293,7 +1296,10 @@ static u32 wl18xx_pre_pkt_send(struct wl1271 *wl,
 	return buf_offset;
 }
 
+static int wl18xx_setup(struct wl1271 *wl);
+
 static struct wlcore_ops wl18xx_ops = {
+	.setup		= wl18xx_setup,
 	.identify_chip	= wl18xx_identify_chip,
 	.boot		= wl18xx_boot,
 	.plt_init	= wl18xx_plt_init,
@@ -1374,27 +1380,15 @@ static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = {
 		},
 };
 
-static int __devinit wl18xx_probe(struct platform_device *pdev)
+static int wl18xx_setup(struct wl1271 *wl)
 {
-	struct wl1271 *wl;
-	struct ieee80211_hw *hw;
-	struct wl18xx_priv *priv;
+	struct wl18xx_priv *priv = wl->priv;
 	int ret;
 
-	hw = wlcore_alloc_hw(sizeof(*priv));
-	if (IS_ERR(hw)) {
-		wl1271_error("can't allocate hw");
-		ret = PTR_ERR(hw);
-		goto out;
-	}
-
-	wl = hw->priv;
-	priv = wl->priv;
-	wl->ops = &wl18xx_ops;
-	wl->ptable = wl18xx_ptable;
 	wl->rtable = wl18xx_rtable;
-	wl->num_tx_desc = 32;
-	wl->num_rx_desc = 32;
+	wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
+	wl->num_rx_desc = WL18XX_NUM_TX_DESCRIPTORS;
+	wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
 	wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
 	wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
 	wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0;
@@ -1405,9 +1399,9 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 	if (num_rx_desc_param != -1)
 		wl->num_rx_desc = num_rx_desc_param;
 
-	ret = wl18xx_conf_init(wl, &pdev->dev);
+	ret = wl18xx_conf_init(wl, wl->dev);
 	if (ret < 0)
-		goto out_free;
+		return ret;
 
 	/* If the module param is set, update it in conf */
 	if (board_type_param) {
@@ -1424,27 +1418,14 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 		} else {
 			wl1271_error("invalid board type '%s'",
 				board_type_param);
-			ret = -EINVAL;
-			goto out_free;
+			return -EINVAL;
 		}
 	}
 
-	/* HACK! Just for now we hardcode COM8 and HDK to 0x06 */
-	switch (priv->conf.phy.board_type) {
-	case BOARD_TYPE_HDK_18XX:
-	case BOARD_TYPE_COM8_18XX:
-		priv->conf.phy.low_band_component_type = 0x06;
-		break;
-	case BOARD_TYPE_FPGA_18XX:
-	case BOARD_TYPE_DVP_18XX:
-	case BOARD_TYPE_EVB_18XX:
-		priv->conf.phy.low_band_component_type = 0x05;
-		break;
-	default:
+	if (priv->conf.phy.board_type >= NUM_BOARD_TYPES) {
 		wl1271_error("invalid board type '%d'",
 			priv->conf.phy.board_type);
-		ret = -EINVAL;
-		goto out_free;
+		return -EINVAL;
 	}
 
 	if (low_band_component_param != -1)
@@ -1476,22 +1457,21 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 			priv->conf.ht.mode = HT_MODE_SISO20;
 		else {
 			wl1271_error("invalid ht_mode '%s'", ht_mode_param);
-			ret = -EINVAL;
-			goto out_free;
+			return -EINVAL;
 		}
 	}
 
 	if (priv->conf.ht.mode == HT_MODE_DEFAULT) {
 		/*
 		 * Only support mimo with multiple antennas. Fall back to
-		 * siso20.
+		 * siso40.
 		 */
 		if (wl18xx_is_mimo_supported(wl))
 			wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
 					  &wl18xx_mimo_ht_cap_2ghz);
 		else
 			wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ,
-					  &wl18xx_siso20_ht_cap);
+					  &wl18xx_siso40_ht_cap_2ghz);
 
 		/* 5Ghz is always wide */
 		wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ,
@@ -1513,9 +1493,34 @@ static int __devinit wl18xx_probe(struct platform_device *pdev)
 		wl18xx_ops.init_vif = NULL;
 	}
 
-	wl->enable_11a = enable_11a_param;
+	/* Enable 11a Band only if we have 5G antennas */
+	wl->enable_11a = (priv->conf.phy.number_of_assembled_ant5 != 0);
+
+	return 0;
+}
+
+static int __devinit wl18xx_probe(struct platform_device *pdev)
+{
+	struct wl1271 *wl;
+	struct ieee80211_hw *hw;
+	int ret;
+
+	hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv),
+			     WL18XX_AGGR_BUFFER_SIZE);
+	if (IS_ERR(hw)) {
+		wl1271_error("can't allocate hw");
+		ret = PTR_ERR(hw);
+		goto out;
+	}
+
+	wl = hw->priv;
+	wl->ops = &wl18xx_ops;
+	wl->ptable = wl18xx_ptable;
+	ret = wlcore_probe(wl, pdev);
+	if (ret)
+		goto out_free;
 
-	return wlcore_probe(wl, pdev);
+	return ret;
 
 out_free:
 	wlcore_free_hw(wl);
@@ -1539,18 +1544,7 @@ static struct platform_driver wl18xx_driver = {
 	}
 };
 
-static int __init wl18xx_init(void)
-{
-	return platform_driver_register(&wl18xx_driver);
-}
-module_init(wl18xx_init);
-
-static void __exit wl18xx_exit(void)
-{
-	platform_driver_unregister(&wl18xx_driver);
-}
-module_exit(wl18xx_exit);
-
+module_platform_driver(wl18xx_driver);
 module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR);
 MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or siso20");
 
@@ -1561,9 +1555,6 @@ MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or "
 module_param_named(checksum, checksum_param, bool, S_IRUSR);
 MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)");
 
-module_param_named(enable_11a, enable_11a_param, bool, S_IRUSR);
-MODULE_PARM_DESC(enable_11a, "Enable 11a (5GHz): boolean (defaults to true)");
-
 module_param_named(dc2dc, dc2dc_param, int, S_IRUSR);
 MODULE_PARM_DESC(dc2dc, "External DC2DC: u8 (defaults to 0)");