wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectory

Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti
directory.  Add a TI WLAN Kconfig option and Makefile to support this
change.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Cc: John W. Linville <linville@tuxdriver.com>

29 files changed, 10680 insertions, 0 deletions

diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
new file mode 100644
index 0000000..1fb6584
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
@@ -0,0 +1,33 @@
+menuconfig WL1251
+	tristate "TI wl1251 driver support"
+	depends on MAC80211 && EXPERIMENTAL && GENERIC_HARDIRQS
+	select FW_LOADER
+	select CRC7
+	---help---
+	  This will enable TI wl1251 driver support. The drivers make
+	  use of the mac80211 stack.
+
+	  If you choose to build a module, it'll be called wl1251. Say
+	  N if unsure.
+
+config WL1251_SPI
+	tristate "TI wl1251 SPI support"
+	depends on WL1251 && SPI_MASTER
+	---help---
+	  This module adds support for the SPI interface of adapters using
+	  TI wl1251 chipset.  Select this if your platform is using
+	  the SPI bus.
+
+	  If you choose to build a module, it'll be called wl1251_spi.
+	  Say N if unsure.
+
+config WL1251_SDIO
+	tristate "TI wl1251 SDIO support"
+	depends on WL1251 && MMC
+	---help---
+	  This module adds support for the SDIO interface of adapters using
+	  TI wl1251 chipset.  Select this if your platform is using
+	  the SDIO bus.
+
+	  If you choose to build a module, it'll be called
+	  wl1251_sdio. Say N if unsure.
diff --git a/drivers/net/wireless/ti/wl1251/Makefile b/drivers/net/wireless/ti/wl1251/Makefile
new file mode 100644
index 0000000..a5c6328
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/Makefile
@@ -0,0 +1,10 @@
+wl1251-objs		= main.o event.o tx.o rx.o ps.o cmd.o \
+			  acx.o boot.o init.o debugfs.o io.o
+wl1251_spi-objs		+= spi.o
+wl1251_sdio-objs	+= sdio.o
+
+obj-$(CONFIG_WL1251)		+= wl1251.o
+obj-$(CONFIG_WL1251_SPI)	+= wl1251_spi.o
+obj-$(CONFIG_WL1251_SDIO)	+= wl1251_sdio.o
+
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/ti/wl1251/acx.c b/drivers/net/wireless/ti/wl1251/acx.c
new file mode 100644
index 0000000..ad87a1a
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/acx.c
@@ -0,0 +1,1097 @@
+#include "acx.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/crc7.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "cmd.h"
+#include "ps.h"
+
+int wl1251_acx_frame_rates(struct wl1251 *wl, u8 ctrl_rate, u8 ctrl_mod,
+			   u8 mgt_rate, u8 mgt_mod)
+{
+	struct acx_fw_gen_frame_rates *rates;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx frame rates");
+
+	rates = kzalloc(sizeof(*rates), GFP_KERNEL);
+	if (!rates) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	rates->tx_ctrl_frame_rate = ctrl_rate;
+	rates->tx_ctrl_frame_mod = ctrl_mod;
+	rates->tx_mgt_frame_rate = mgt_rate;
+	rates->tx_mgt_frame_mod = mgt_mod;
+
+	ret = wl1251_cmd_configure(wl, ACX_FW_GEN_FRAME_RATES,
+				   rates, sizeof(*rates));
+	if (ret < 0) {
+		wl1251_error("Failed to set FW rates and modulation");
+		goto out;
+	}
+
+out:
+	kfree(rates);
+	return ret;
+}
+
+
+int wl1251_acx_station_id(struct wl1251 *wl)
+{
+	struct acx_dot11_station_id *mac;
+	int ret, i;
+
+	wl1251_debug(DEBUG_ACX, "acx dot11_station_id");
+
+	mac = kzalloc(sizeof(*mac), GFP_KERNEL);
+	if (!mac) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < ETH_ALEN; i++)
+		mac->mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
+
+	ret = wl1251_cmd_configure(wl, DOT11_STATION_ID, mac, sizeof(*mac));
+	if (ret < 0)
+		goto out;
+
+out:
+	kfree(mac);
+	return ret;
+}
+
+int wl1251_acx_default_key(struct wl1251 *wl, u8 key_id)
+{
+	struct acx_dot11_default_key *default_key;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
+
+	default_key = kzalloc(sizeof(*default_key), GFP_KERNEL);
+	if (!default_key) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	default_key->id = key_id;
+
+	ret = wl1251_cmd_configure(wl, DOT11_DEFAULT_KEY,
+				   default_key, sizeof(*default_key));
+	if (ret < 0) {
+		wl1251_error("Couldn't set default key");
+		goto out;
+	}
+
+	wl->default_key = key_id;
+
+out:
+	kfree(default_key);
+	return ret;
+}
+
+int wl1251_acx_wake_up_conditions(struct wl1251 *wl, u8 wake_up_event,
+				  u8 listen_interval)
+{
+	struct acx_wake_up_condition *wake_up;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx wake up conditions");
+
+	wake_up = kzalloc(sizeof(*wake_up), GFP_KERNEL);
+	if (!wake_up) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wake_up->wake_up_event = wake_up_event;
+	wake_up->listen_interval = listen_interval;
+
+	ret = wl1251_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS,
+				   wake_up, sizeof(*wake_up));
+	if (ret < 0) {
+		wl1251_warning("could not set wake up conditions: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(wake_up);
+	return ret;
+}
+
+int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth)
+{
+	struct acx_sleep_auth *auth;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx sleep auth");
+
+	auth = kzalloc(sizeof(*auth), GFP_KERNEL);
+	if (!auth) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	auth->sleep_auth = sleep_auth;
+
+	ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
+
+out:
+	kfree(auth);
+	return ret;
+}
+
+int wl1251_acx_fw_version(struct wl1251 *wl, char *buf, size_t len)
+{
+	struct acx_revision *rev;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx fw rev");
+
+	rev = kzalloc(sizeof(*rev), GFP_KERNEL);
+	if (!rev) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl1251_cmd_interrogate(wl, ACX_FW_REV, rev, sizeof(*rev));
+	if (ret < 0) {
+		wl1251_warning("ACX_FW_REV interrogate failed");
+		goto out;
+	}
+
+	/* be careful with the buffer sizes */
+	strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+	/*
+	 * if the firmware version string is exactly
+	 * sizeof(rev->fw_version) long or fw_len is less than
+	 * sizeof(rev->fw_version) it won't be null terminated
+	 */
+	buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+out:
+	kfree(rev);
+	return ret;
+}
+
+int wl1251_acx_tx_power(struct wl1251 *wl, int power)
+{
+	struct acx_current_tx_power *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+	if (power < 0 || power > 25)
+		return -EINVAL;
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->current_tx_power = power * 10;
+
+	ret = wl1251_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("configure of tx power failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_feature_cfg(struct wl1251 *wl)
+{
+	struct acx_feature_config *feature;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx feature cfg");
+
+	feature = kzalloc(sizeof(*feature), GFP_KERNEL);
+	if (!feature) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+	feature->data_flow_options = 0;
+	feature->options = 0;
+
+	ret = wl1251_cmd_configure(wl, ACX_FEATURE_CFG,
+				   feature, sizeof(*feature));
+	if (ret < 0) {
+		wl1251_error("Couldn't set HW encryption");
+		goto out;
+	}
+
+out:
+	kfree(feature);
+	return ret;
+}
+
+int wl1251_acx_mem_map(struct wl1251 *wl, struct acx_header *mem_map,
+		       size_t len)
+{
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx mem map");
+
+	ret = wl1251_cmd_interrogate(wl, ACX_MEM_MAP, mem_map, len);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_acx_data_path_params(struct wl1251 *wl,
+				struct acx_data_path_params_resp *resp)
+{
+	struct acx_data_path_params *params;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx data path params");
+
+	params = kzalloc(sizeof(*params), GFP_KERNEL);
+	if (!params) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	params->rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
+	params->tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
+
+	params->rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
+	params->tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
+
+	params->tx_complete_threshold = 1;
+
+	params->tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
+
+	params->tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
+
+	ret = wl1251_cmd_configure(wl, ACX_DATA_PATH_PARAMS,
+				   params, sizeof(*params));
+	if (ret < 0)
+		goto out;
+
+	/* FIXME: shouldn't this be ACX_DATA_PATH_RESP_PARAMS? */
+	ret = wl1251_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
+				     resp, sizeof(*resp));
+
+	if (ret < 0) {
+		wl1251_warning("failed to read data path parameters: %d", ret);
+		goto out;
+	} else if (resp->header.cmd.status != CMD_STATUS_SUCCESS) {
+		wl1251_warning("data path parameter acx status failed");
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(params);
+	return ret;
+}
+
+int wl1251_acx_rx_msdu_life_time(struct wl1251 *wl, u32 life_time)
+{
+	struct acx_rx_msdu_lifetime *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx rx msdu life time");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->lifetime = life_time;
+	ret = wl1251_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("failed to set rx msdu life time: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_rx_config(struct wl1251 *wl, u32 config, u32 filter)
+{
+	struct acx_rx_config *rx_config;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx rx config");
+
+	rx_config = kzalloc(sizeof(*rx_config), GFP_KERNEL);
+	if (!rx_config) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	rx_config->config_options = config;
+	rx_config->filter_options = filter;
+
+	ret = wl1251_cmd_configure(wl, ACX_RX_CFG,
+				   rx_config, sizeof(*rx_config));
+	if (ret < 0) {
+		wl1251_warning("failed to set rx config: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(rx_config);
+	return ret;
+}
+
+int wl1251_acx_pd_threshold(struct wl1251 *wl)
+{
+	struct acx_packet_detection *pd;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx data pd threshold");
+
+	pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* FIXME: threshold value not set */
+
+	ret = wl1251_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd));
+	if (ret < 0) {
+		wl1251_warning("failed to set pd threshold: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(pd);
+	return ret;
+}
+
+int wl1251_acx_slot(struct wl1251 *wl, enum acx_slot_type slot_time)
+{
+	struct acx_slot *slot;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx slot");
+
+	slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+	if (!slot) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	slot->wone_index = STATION_WONE_INDEX;
+	slot->slot_time = slot_time;
+
+	ret = wl1251_cmd_configure(wl, ACX_SLOT, slot, sizeof(*slot));
+	if (ret < 0) {
+		wl1251_warning("failed to set slot time: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(slot);
+	return ret;
+}
+
+int wl1251_acx_group_address_tbl(struct wl1251 *wl)
+{
+	struct acx_dot11_grp_addr_tbl *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx group address tbl");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* MAC filtering */
+	acx->enabled = 0;
+	acx->num_groups = 0;
+	memset(acx->mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+	ret = wl1251_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("failed to set group addr table: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_service_period_timeout(struct wl1251 *wl)
+{
+	struct acx_rx_timeout *rx_timeout;
+	int ret;
+
+	rx_timeout = kzalloc(sizeof(*rx_timeout), GFP_KERNEL);
+	if (!rx_timeout) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_ACX, "acx service period timeout");
+
+	rx_timeout->ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+	rx_timeout->upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+	ret = wl1251_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT,
+				   rx_timeout, sizeof(*rx_timeout));
+	if (ret < 0) {
+		wl1251_warning("failed to set service period timeout: %d",
+			       ret);
+		goto out;
+	}
+
+out:
+	kfree(rx_timeout);
+	return ret;
+}
+
+int wl1251_acx_rts_threshold(struct wl1251 *wl, u16 rts_threshold)
+{
+	struct acx_rts_threshold *rts;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx rts threshold");
+
+	rts = kzalloc(sizeof(*rts), GFP_KERNEL);
+	if (!rts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	rts->threshold = rts_threshold;
+
+	ret = wl1251_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
+	if (ret < 0) {
+		wl1251_warning("failed to set rts threshold: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(rts);
+	return ret;
+}
+
+int wl1251_acx_beacon_filter_opt(struct wl1251 *wl, bool enable_filter)
+{
+	struct acx_beacon_filter_option *beacon_filter;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx beacon filter opt");
+
+	beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL);
+	if (!beacon_filter) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	beacon_filter->enable = enable_filter;
+	beacon_filter->max_num_beacons = 0;
+
+	ret = wl1251_cmd_configure(wl, ACX_BEACON_FILTER_OPT,
+				   beacon_filter, sizeof(*beacon_filter));
+	if (ret < 0) {
+		wl1251_warning("failed to set beacon filter opt: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(beacon_filter);
+	return ret;
+}
+
+int wl1251_acx_beacon_filter_table(struct wl1251 *wl)
+{
+	struct acx_beacon_filter_ie_table *ie_table;
+	int idx = 0;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx beacon filter table");
+
+	ie_table = kzalloc(sizeof(*ie_table), GFP_KERNEL);
+	if (!ie_table) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* configure default beacon pass-through rules */
+	ie_table->num_ie = 1;
+	ie_table->table[idx++] = BEACON_FILTER_IE_ID_CHANNEL_SWITCH_ANN;
+	ie_table->table[idx++] = BEACON_RULE_PASS_ON_APPEARANCE;
+
+	ret = wl1251_cmd_configure(wl, ACX_BEACON_FILTER_TABLE,
+				   ie_table, sizeof(*ie_table));
+	if (ret < 0) {
+		wl1251_warning("failed to set beacon filter table: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(ie_table);
+	return ret;
+}
+
+int wl1251_acx_conn_monit_params(struct wl1251 *wl)
+{
+	struct acx_conn_monit_params *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx connection monitor parameters");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->synch_fail_thold = SYNCH_FAIL_DEFAULT_THRESHOLD;
+	acx->bss_lose_timeout = NO_BEACON_DEFAULT_TIMEOUT;
+
+	ret = wl1251_cmd_configure(wl, ACX_CONN_MONIT_PARAMS,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("failed to set connection monitor "
+			       "parameters: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_sg_enable(struct wl1251 *wl)
+{
+	struct acx_bt_wlan_coex *pta;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx sg enable");
+
+	pta = kzalloc(sizeof(*pta), GFP_KERNEL);
+	if (!pta) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	pta->enable = SG_ENABLE;
+
+	ret = wl1251_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta));
+	if (ret < 0) {
+		wl1251_warning("failed to set softgemini enable: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(pta);
+	return ret;
+}
+
+int wl1251_acx_sg_cfg(struct wl1251 *wl)
+{
+	struct acx_bt_wlan_coex_param *param;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx sg cfg");
+
+	param = kzalloc(sizeof(*param), GFP_KERNEL);
+	if (!param) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* BT-WLAN coext parameters */
+	param->min_rate = RATE_INDEX_24MBPS;
+	param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+	param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+	param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+	param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+	param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+	param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+	param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+	param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+	param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+	param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+	param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+	param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+	param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+	param->antenna_type = PTA_ANTENNA_TYPE_DEF;
+	param->signal_type = PTA_SIGNALING_TYPE_DEF;
+	param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+	param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+	param->max_cts = PTA_MAX_NUM_CTS_DEF;
+	param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+	param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+	param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+	param->wlan_elp_hp = PTA_ELP_HP_DEF;
+	param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+	param->ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+	param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+	param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+	param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+	ret = wl1251_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
+	if (ret < 0) {
+		wl1251_warning("failed to set sg config: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(param);
+	return ret;
+}
+
+int wl1251_acx_cca_threshold(struct wl1251 *wl)
+{
+	struct acx_energy_detection *detection;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx cca threshold");
+
+	detection = kzalloc(sizeof(*detection), GFP_KERNEL);
+	if (!detection) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	detection->rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+	detection->tx_energy_detection = 0;
+
+	ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD,
+				   detection, sizeof(*detection));
+	if (ret < 0)
+		wl1251_warning("failed to set cca threshold: %d", ret);
+
+out:
+	kfree(detection);
+	return ret;
+}
+
+int wl1251_acx_bcn_dtim_options(struct wl1251 *wl)
+{
+	struct acx_beacon_broadcast *bb;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx bcn dtim options");
+
+	bb = kzalloc(sizeof(*bb), GFP_KERNEL);
+	if (!bb) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bb->beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+	bb->broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+	bb->rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+	bb->ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+	ret = wl1251_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb));
+	if (ret < 0) {
+		wl1251_warning("failed to set rx config: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(bb);
+	return ret;
+}
+
+int wl1251_acx_aid(struct wl1251 *wl, u16 aid)
+{
+	struct acx_aid *acx_aid;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx aid");
+
+	acx_aid = kzalloc(sizeof(*acx_aid), GFP_KERNEL);
+	if (!acx_aid) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx_aid->aid = aid;
+
+	ret = wl1251_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid));
+	if (ret < 0) {
+		wl1251_warning("failed to set aid: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx_aid);
+	return ret;
+}
+
+int wl1251_acx_event_mbox_mask(struct wl1251 *wl, u32 event_mask)
+{
+	struct acx_event_mask *mask;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx event mbox mask");
+
+	mask = kzalloc(sizeof(*mask), GFP_KERNEL);
+	if (!mask) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* high event mask is unused */
+	mask->high_event_mask = 0xffffffff;
+
+	mask->event_mask = event_mask;
+
+	ret = wl1251_cmd_configure(wl, ACX_EVENT_MBOX_MASK,
+				   mask, sizeof(*mask));
+	if (ret < 0) {
+		wl1251_warning("failed to set acx_event_mbox_mask: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(mask);
+	return ret;
+}
+
+int wl1251_acx_low_rssi(struct wl1251 *wl, s8 threshold, u8 weight,
+			u8 depth, enum wl1251_acx_low_rssi_type type)
+{
+	struct acx_low_rssi *rssi;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx low rssi");
+
+	rssi = kzalloc(sizeof(*rssi), GFP_KERNEL);
+	if (!rssi)
+		return -ENOMEM;
+
+	rssi->threshold = threshold;
+	rssi->weight = weight;
+	rssi->depth = depth;
+	rssi->type = type;
+
+	ret = wl1251_cmd_configure(wl, ACX_LOW_RSSI, rssi, sizeof(*rssi));
+	if (ret < 0)
+		wl1251_warning("failed to set low rssi threshold: %d", ret);
+
+	kfree(rssi);
+	return ret;
+}
+
+int wl1251_acx_set_preamble(struct wl1251 *wl, enum acx_preamble_type preamble)
+{
+	struct acx_preamble *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx_set_preamble");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->preamble = preamble;
+
+	ret = wl1251_cmd_configure(wl, ACX_PREAMBLE_TYPE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("Setting of preamble failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_cts_protect(struct wl1251 *wl,
+			   enum acx_ctsprotect_type ctsprotect)
+{
+	struct acx_ctsprotect *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->ctsprotect = ctsprotect;
+
+	ret = wl1251_cmd_configure(wl, ACX_CTS_PROTECTION, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("Setting of ctsprotect failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime)
+{
+	struct acx_tsf_info *tsf_info;
+	int ret;
+
+	tsf_info = kzalloc(sizeof(*tsf_info), GFP_KERNEL);
+	if (!tsf_info) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl1251_cmd_interrogate(wl, ACX_TSF_INFO,
+				     tsf_info, sizeof(*tsf_info));
+	if (ret < 0) {
+		wl1251_warning("ACX_FW_REV interrogate failed");
+		goto out;
+	}
+
+	*mactime = tsf_info->current_tsf_lsb |
+		(tsf_info->current_tsf_msb << 31);
+
+out:
+	kfree(tsf_info);
+	return ret;
+}
+
+int wl1251_acx_statistics(struct wl1251 *wl, struct acx_statistics *stats)
+{
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx statistics");
+
+	ret = wl1251_cmd_interrogate(wl, ACX_STATISTICS, stats,
+				     sizeof(*stats));
+	if (ret < 0) {
+		wl1251_warning("acx statistics failed: %d", ret);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+int wl1251_acx_rate_policies(struct wl1251 *wl)
+{
+	struct acx_rate_policy *acx;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_ACX, "acx rate policies");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* configure one default (one-size-fits-all) rate class */
+	acx->rate_class_cnt = 1;
+	acx->rate_class[0].enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
+	acx->rate_class[0].short_retry_limit = ACX_RATE_RETRY_LIMIT;
+	acx->rate_class[0].long_retry_limit = ACX_RATE_RETRY_LIMIT;
+	acx->rate_class[0].aflags = 0;
+
+	ret = wl1251_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("Setting of rate policies failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_mem_cfg(struct wl1251 *wl)
+{
+	struct wl1251_acx_config_memory *mem_conf;
+	int ret, i;
+
+	wl1251_debug(DEBUG_ACX, "acx mem cfg");
+
+	mem_conf = kzalloc(sizeof(*mem_conf), GFP_KERNEL);
+	if (!mem_conf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* memory config */
+	mem_conf->mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+	mem_conf->mem_config.rx_mem_block_num = 35;
+	mem_conf->mem_config.tx_min_mem_block_num = 64;
+	mem_conf->mem_config.num_tx_queues = MAX_TX_QUEUES;
+	mem_conf->mem_config.host_if_options = HOSTIF_PKT_RING;
+	mem_conf->mem_config.num_ssid_profiles = 1;
+	mem_conf->mem_config.debug_buffer_size =
+		cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+	/* RX queue config */
+	mem_conf->rx_queue_config.dma_address = 0;
+	mem_conf->rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+	mem_conf->rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+	mem_conf->rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+	/* TX queue config */
+	for (i = 0; i < MAX_TX_QUEUES; i++) {
+		mem_conf->tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+		mem_conf->tx_queue_config[i].attributes = i;
+	}
+
+	ret = wl1251_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
+				   sizeof(*mem_conf));
+	if (ret < 0) {
+		wl1251_warning("wl1251 mem config failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(mem_conf);
+	return ret;
+}
+
+int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim)
+{
+	struct wl1251_acx_wr_tbtt_and_dtim *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx tbtt and dtim");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->tbtt = tbtt;
+	acx->dtim = dtim;
+
+	ret = wl1251_cmd_configure(wl, ACX_WR_TBTT_AND_DTIM,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("failed to set tbtt and dtim: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_bet_enable(struct wl1251 *wl, enum wl1251_acx_bet_mode mode,
+			  u8 max_consecutive)
+{
+	struct wl1251_acx_bet_enable *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx bet enable");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->enable = mode;
+	acx->max_consecutive = max_consecutive;
+
+	ret = wl1251_cmd_configure(wl, ACX_BET_ENABLE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("wl1251 acx bet enable failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
+		      u8 aifs, u16 txop)
+{
+	struct wl1251_acx_ac_cfg *acx;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_ACX, "acx ac cfg %d cw_ming %d cw_max %d "
+		     "aifs %d txop %d", ac, cw_min, cw_max, aifs, txop);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->ac = ac;
+	acx->cw_min = cw_min;
+	acx->cw_max = cw_max;
+	acx->aifsn = aifs;
+	acx->txop_limit = txop;
+
+	ret = wl1251_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("acx ac cfg failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1251_acx_tid_cfg(struct wl1251 *wl, u8 queue,
+		       enum wl1251_acx_channel_type type,
+		       u8 tsid, enum wl1251_acx_ps_scheme ps_scheme,
+		       enum wl1251_acx_ack_policy ack_policy)
+{
+	struct wl1251_acx_tid_cfg *acx;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_ACX, "acx tid cfg %d type %d tsid %d "
+		     "ps_scheme %d ack_policy %d", queue, type, tsid,
+		     ps_scheme, ack_policy);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->queue = queue;
+	acx->type = type;
+	acx->tsid = tsid;
+	acx->ps_scheme = ps_scheme;
+	acx->ack_policy = ack_policy;
+
+	ret = wl1251_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("acx tid cfg failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h
new file mode 100644
index 0000000..c2ba100
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/acx.h
@@ -0,0 +1,1483 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_ACX_H__
+#define __WL1251_ACX_H__
+
+#include "wl1251.h"
+#include "cmd.h"
+
+/* Target's information element */
+struct acx_header {
+	struct wl1251_cmd_header cmd;
+
+	/* acx (or information element) header */
+	u16 id;
+
+	/* payload length (not including headers */
+	u16 len;
+} __packed;
+
+struct acx_error_counter {
+	struct acx_header header;
+
+	/* The number of PLCP errors since the last time this */
+	/* information element was interrogated. This field is */
+	/* automatically cleared when it is interrogated.*/
+	u32 PLCP_error;
+
+	/* The number of FCS errors since the last time this */
+	/* information element was interrogated. This field is */
+	/* automatically cleared when it is interrogated.*/
+	u32 FCS_error;
+
+	/* The number of MPDUs without PLCP header errors received*/
+	/* since the last time this information element was interrogated. */
+	/* This field is automatically cleared when it is interrogated.*/
+	u32 valid_frame;
+
+	/* the number of missed sequence numbers in the squentially */
+	/* values of frames seq numbers */
+	u32 seq_num_miss;
+} __packed;
+
+struct acx_revision {
+	struct acx_header header;
+
+	/*
+	 * The WiLink firmware version, an ASCII string x.x.x.x,
+	 * that uniquely identifies the current firmware.
+	 * The left most digit is incremented each time a
+	 * significant change is made to the firmware, such as
+	 * code redesign or new platform support.
+	 * The second digit is incremented when major enhancements
+	 * are added or major fixes are made.
+	 * The third digit is incremented for each GA release.
+	 * The fourth digit is incremented for each build.
+	 * The first two digits identify a firmware release version,
+	 * in other words, a unique set of features.
+	 * The first three digits identify a GA release.
+	 */
+	char fw_version[20];
+
+	/*
+	 * This 4 byte field specifies the WiLink hardware version.
+	 * bits 0  - 15: Reserved.
+	 * bits 16 - 23: Version ID - The WiLink version ID
+	 *              (1 = first spin, 2 = second spin, and so on).
+	 * bits 24 - 31: Chip ID - The WiLink chip ID.
+	 */
+	u32 hw_version;
+} __packed;
+
+enum wl1251_psm_mode {
+	/* Active mode */
+	WL1251_PSM_CAM = 0,
+
+	/* Power save mode */
+	WL1251_PSM_PS = 1,
+
+	/* Extreme low power */
+	WL1251_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+	struct acx_header header;
+
+	/* The sleep level authorization of the device. */
+	/* 0 - Always active*/
+	/* 1 - Power down mode: light / fast sleep*/
+	/* 2 - ELP mode: Deep / Max sleep*/
+	u8  sleep_auth;
+	u8  padding[3];
+} __packed;
+
+enum {
+	HOSTIF_PCI_MASTER_HOST_INDIRECT,
+	HOSTIF_PCI_MASTER_HOST_DIRECT,
+	HOSTIF_SLAVE,
+	HOSTIF_PKT_RING,
+	HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY          0
+#define DEFAULT_RX_Q_PRIORITY           0
+#define DEFAULT_NUM_STATIONS            1
+#define DEFAULT_RXQ_PRIORITY            0 /* low 0 .. 15 high  */
+#define DEFAULT_RXQ_TYPE                0x07    /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE           256
+
+#define  DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define  DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define  DP_RX_PACKET_RING_CHUNK_NUM 2
+#define  DP_TX_PACKET_RING_CHUNK_NUM 2
+#define  DP_TX_COMPLETE_TIME_OUT 20
+#define  FW_TX_CMPLT_BLOCK_SIZE 16
+
+struct acx_data_path_params {
+	struct acx_header header;
+
+	u16 rx_packet_ring_chunk_size;
+	u16 tx_packet_ring_chunk_size;
+
+	u8 rx_packet_ring_chunk_num;
+	u8 tx_packet_ring_chunk_num;
+
+	/*
+	 * Maximum number of packets that can be gathered
+	 * in the TX complete ring before an interrupt
+	 * is generated.
+	 */
+	u8 tx_complete_threshold;
+
+	/* Number of pending TX complete entries in cyclic ring.*/
+	u8 tx_complete_ring_depth;
+
+	/*
+	 * Max num microseconds since a packet enters the TX
+	 * complete ring until an interrupt is generated.
+	 */
+	u32 tx_complete_timeout;
+} __packed;
+
+
+struct acx_data_path_params_resp {
+	struct acx_header header;
+
+	u16 rx_packet_ring_chunk_size;
+	u16 tx_packet_ring_chunk_size;
+
+	u8 rx_packet_ring_chunk_num;
+	u8 tx_packet_ring_chunk_num;
+
+	u8 pad[2];
+
+	u32 rx_packet_ring_addr;
+	u32 tx_packet_ring_addr;
+
+	u32 rx_control_addr;
+	u32 tx_control_addr;
+
+	u32 tx_complete_addr;
+} __packed;
+
+#define TX_MSDU_LIFETIME_MIN       0
+#define TX_MSDU_LIFETIME_MAX       3000
+#define TX_MSDU_LIFETIME_DEF       512
+#define RX_MSDU_LIFETIME_MIN       0
+#define RX_MSDU_LIFETIME_MAX       0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF       512000
+
+struct acx_rx_msdu_lifetime {
+	struct acx_header header;
+
+	/*
+	 * The maximum amount of time, in TU, before the
+	 * firmware discards the MSDU.
+	 */
+	u32 lifetime;
+} __packed;
+
+/*
+ * RX Config Options Table
+ * Bit		Definition
+ * ===		==========
+ * 31:14		Reserved
+ * 13		Copy RX Status - when set, write three receive status words
+ * 	 	to top of rx'd MPDUs.
+ * 		When cleared, do not write three status words (added rev 1.5)
+ * 12		Reserved
+ * 11		RX Complete upon FCS error - when set, give rx complete
+ *	 	interrupt for FCS errors, after the rx filtering, e.g. unicast
+ *	 	frames not to us with FCS error will not generate an interrupt.
+ * 10		SSID Filter Enable - When set, the WiLink discards all beacon,
+ *	        probe request, and probe response frames with an SSID that does
+ *		not match the SSID specified by the host in the START/JOIN
+ *		command.
+ *		When clear, the WiLink receives frames with any SSID.
+ * 9		Broadcast Filter Enable - When set, the WiLink discards all
+ * 	 	broadcast frames. When clear, the WiLink receives all received
+ *		broadcast frames.
+ * 8:6		Reserved
+ * 5		BSSID Filter Enable - When set, the WiLink discards any frames
+ * 	 	with a BSSID that does not match the BSSID specified by the
+ *		host.
+ *		When clear, the WiLink receives frames from any BSSID.
+ * 4		MAC Addr Filter - When set, the WiLink discards any frames
+ * 	 	with a destination address that does not match the MAC address
+ *		of the adaptor.
+ *		When clear, the WiLink receives frames destined to any MAC
+ *		address.
+ * 3		Promiscuous - When set, the WiLink receives all valid frames
+ * 	 	(i.e., all frames that pass the FCS check).
+ *		When clear, only frames that pass the other filters specified
+ *		are received.
+ * 2		FCS - When set, the WiLink includes the FCS with the received
+ *	 	frame.
+ *		When cleared, the FCS is discarded.
+ * 1		PLCP header - When set, write all data from baseband to frame
+ * 	 	buffer including PHY header.
+ * 0		Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit		Definition
+ * ===		==========
+ * 31:12		Reserved - Always equal to 0.
+ * 11		Association - When set, the WiLink receives all association
+ * 	 	related frames (association request/response, reassocation
+ *		request/response, and disassociation). When clear, these frames
+ *		are discarded.
+ * 10		Auth/De auth - When set, the WiLink receives all authentication
+ * 	 	and de-authentication frames. When clear, these frames are
+ *		discarded.
+ * 9		Beacon - When set, the WiLink receives all beacon frames.
+ * 	 	When clear, these frames are discarded.
+ * 8		Contention Free - When set, the WiLink receives all contention
+ * 	 	free frames.
+ *		When clear, these frames are discarded.
+ * 7		Control - When set, the WiLink receives all control frames.
+ * 	 	When clear, these frames are discarded.
+ * 6		Data - When set, the WiLink receives all data frames.
+ * 	 	When clear, these frames are discarded.
+ * 5		FCS Error - When set, the WiLink receives frames that have FCS
+ *	 	errors.
+ *		When clear, these frames are discarded.
+ * 4		Management - When set, the WiLink receives all management
+ *		frames.
+ * 	 	When clear, these frames are discarded.
+ * 3		Probe Request - When set, the WiLink receives all probe request
+ * 	 	frames.
+ *		When clear, these frames are discarded.
+ * 2		Probe Response - When set, the WiLink receives all probe
+ * 		response frames.
+ *		When clear, these frames are discarded.
+ * 1		RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * 	 	frames.
+ *		When clear, these frames are discarded.
+ * 0		Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * 	 	that have reserved frame types and sub types as defined by the
+ *		802.11 specification.
+ *		When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+	struct acx_header header;
+
+	u32 config_options;
+	u32 filter_options;
+} __packed;
+
+enum {
+	QOS_AC_BE = 0,
+	QOS_AC_BK,
+	QOS_AC_VI,
+	QOS_AC_VO,
+	QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
+};
+
+#define MAX_NUM_OF_AC             (QOS_HIGHEST_AC_INDEX+1)
+#define FIRST_AC_INDEX            QOS_AC_BE
+#define MAX_NUM_OF_802_1d_TAGS    8
+#define AC_PARAMS_MAX_TSID        15
+#define MAX_APSD_CONF             0xffff
+
+#define  QOS_TX_HIGH_MIN      (0)
+#define  QOS_TX_HIGH_MAX      (100)
+
+#define  QOS_TX_HIGH_BK_DEF   (25)
+#define  QOS_TX_HIGH_BE_DEF   (35)
+#define  QOS_TX_HIGH_VI_DEF   (35)
+#define  QOS_TX_HIGH_VO_DEF   (35)
+
+#define  QOS_TX_LOW_BK_DEF    (15)
+#define  QOS_TX_LOW_BE_DEF    (25)
+#define  QOS_TX_LOW_VI_DEF    (25)
+#define  QOS_TX_LOW_VO_DEF    (25)
+
+struct acx_tx_queue_qos_config {
+	struct acx_header header;
+
+	u8 qid;
+	u8 pad[3];
+
+	/* Max number of blocks allowd in the queue */
+	u16 high_threshold;
+
+	/* Lowest memory blocks guaranteed for this queue */
+	u16 low_threshold;
+} __packed;
+
+struct acx_packet_detection {
+	struct acx_header header;
+
+	u32 threshold;
+} __packed;
+
+
+enum acx_slot_type {
+	SLOT_TIME_LONG = 0,
+	SLOT_TIME_SHORT = 1,
+	DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+	MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+	struct acx_header header;
+
+	u8 wone_index; /* Reserved */
+	u8 slot_time;
+	u8 reserved[6];
+} __packed;
+
+
+#define ADDRESS_GROUP_MAX	(8)
+#define ADDRESS_GROUP_MAX_LEN	(ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct acx_dot11_grp_addr_tbl {
+	struct acx_header header;
+
+	u8 enabled;
+	u8 num_groups;
+	u8 pad[2];
+	u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __packed;
+
+
+#define  RX_TIMEOUT_PS_POLL_MIN    0
+#define  RX_TIMEOUT_PS_POLL_MAX    (200000)
+#define  RX_TIMEOUT_PS_POLL_DEF    (15)
+#define  RX_TIMEOUT_UPSD_MIN       0
+#define  RX_TIMEOUT_UPSD_MAX       (200000)
+#define  RX_TIMEOUT_UPSD_DEF       (15)
+
+struct acx_rx_timeout {
+	struct acx_header header;
+
+	/*
+	 * The longest time the STA will wait to receive
+	 * traffic from the AP after a PS-poll has been
+	 * transmitted.
+	 */
+	u16 ps_poll_timeout;
+
+	/*
+	 * The longest time the STA will wait to receive
+	 * traffic from the AP after a frame has been sent
+	 * from an UPSD enabled queue.
+	 */
+	u16 upsd_timeout;
+} __packed;
+
+#define RTS_THRESHOLD_MIN              0
+#define RTS_THRESHOLD_MAX              4096
+#define RTS_THRESHOLD_DEF              2347
+
+struct acx_rts_threshold {
+	struct acx_header header;
+
+	u16 threshold;
+	u8 pad[2];
+} __packed;
+
+enum wl1251_acx_low_rssi_type {
+	/*
+	 * The event is a "Level" indication which keeps triggering
+	 * as long as the average RSSI is below the threshold.
+	 */
+	WL1251_ACX_LOW_RSSI_TYPE_LEVEL = 0,
+
+	/*
+	 * The event is an "Edge" indication which triggers
+	 * only when the RSSI threshold is crossed from above.
+	 */
+	WL1251_ACX_LOW_RSSI_TYPE_EDGE = 1,
+};
+
+struct acx_low_rssi {
+	struct acx_header header;
+
+	/*
+	 * The threshold (in dBm) below (or above after low rssi
+	 * indication) which the firmware generates an interrupt to the
+	 * host. This parameter is signed.
+	 */
+	s8 threshold;
+
+	/*
+	 * The weight of the current RSSI sample, before adding the new
+	 * sample, that is used to calculate the average RSSI.
+	 */
+	u8 weight;
+
+	/*
+	 * The number of Beacons/Probe response frames that will be
+	 * received before issuing the Low or Regained RSSI event.
+	 */
+	u8 depth;
+
+	/*
+	 * Configures how the Low RSSI Event is triggered. Refer to
+	 * enum wl1251_acx_low_rssi_type for more.
+	 */
+	u8 type;
+} __packed;
+
+struct acx_beacon_filter_option {
+	struct acx_header header;
+
+	u8 enable;
+
+	/*
+	 * The number of beacons without the unicast TIM
+	 * bit set that the firmware buffers before
+	 * signaling the host about ready frames.
+	 * When set to 0 and the filter is enabled, beacons
+	 * without the unicast TIM bit set are dropped.
+	 */
+	u8 max_num_beacons;
+	u8 pad[2];
+} __packed;
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset     Size (Bytes)    Definition
+ * ===========     ============    ==========
+ * 0				1               IE identifier
+ * 1               1               Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset     Size (Bytes)    Definition
+ * ===========     ============    ==========
+ * 0               1               IE identifier
+ * 1               1               Treatment bit mask
+ * 2               3               OUI
+ * 5               1               Type
+ * 6               2               Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define	BEACON_FILTER_TABLE_MAX_IE_NUM		       (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE	       (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+			    BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+			   (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+			    BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+#define BEACON_RULE_PASS_ON_CHANGE                     BIT(0)
+#define BEACON_RULE_PASS_ON_APPEARANCE                 BIT(1)
+
+#define BEACON_FILTER_IE_ID_CHANNEL_SWITCH_ANN         (37)
+
+struct acx_beacon_filter_ie_table {
+	struct acx_header header;
+
+	u8 num_ie;
+	u8 pad[3];
+	u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+} __packed;
+
+#define SYNCH_FAIL_DEFAULT_THRESHOLD    10     /* number of beacons */
+#define NO_BEACON_DEFAULT_TIMEOUT       (500) /* in microseconds */
+
+struct acx_conn_monit_params {
+	struct acx_header header;
+
+	u32 synch_fail_thold; /* number of beacons missed */
+	u32 bss_lose_timeout; /* number of TU's from synch fail */
+} __packed;
+
+enum {
+	SG_ENABLE = 0,
+	SG_DISABLE,
+	SG_SENSE_NO_ACTIVITY,
+	SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+	struct acx_header header;
+
+	/*
+	 * 0 -> PTA enabled
+	 * 1 -> PTA disabled
+	 * 2 -> sense no active mode, i.e.
+	 *      an interrupt is sent upon
+	 *      BT activity.
+	 * 3 -> PTA is switched on in response
+	 *      to the interrupt sending.
+	 */
+	u8 enable;
+	u8 pad[3];
+} __packed;
+
+#define PTA_ANTENNA_TYPE_DEF		  (0)
+#define PTA_BT_HP_MAXTIME_DEF		  (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF	  (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF	  (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF	  (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF		  (1)
+#define PTA_AFH_LEVERAGE_ON_DEF		  (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF	  (0)
+#define PTA_MAX_NUM_CTS_DEF		  (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF	  (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF	  (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF	  (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF	  (3000)
+#define PTA_CYCLE_TIME_FAST_DEF		  (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF	  (5)
+#define PTA_ELP_HP_DEF			  (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF	  (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF	  (4)
+#define PTA_ALLOW_PA_SD_DEF		  (1)
+#define PTA_TIME_BEFORE_BEACON_DEF	  (6300)
+#define PTA_HPDM_MAX_TIME_DEF		  (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF	  (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF	  (0)
+#define PTA_BT_HP_RESPECTED_DEF		  (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF	  (24)
+#define PTA_ACK_MODE_DEF		  (1)
+
+struct acx_bt_wlan_coex_param {
+	struct acx_header header;
+
+	/*
+	 * The minimum rate of a received WLAN packet in the STA,
+	 * during protective mode, of which a new BT-HP request
+	 * during this Rx will always be respected and gain the antenna.
+	 */
+	u32 min_rate;
+
+	/* Max time the BT HP will be respected. */
+	u16 bt_hp_max_time;
+
+	/* Max time the WLAN HP will be respected. */
+	u16 wlan_hp_max_time;
+
+	/*
+	 * The time between the last BT activity
+	 * and the moment when the sense mode returns
+	 * to SENSE_INACTIVE.
+	 */
+	u16 sense_disable_timer;
+
+	/* Time before the next BT HP instance */
+	u16 rx_time_bt_hp;
+	u16 tx_time_bt_hp;
+
+	/* range: 10-20000    default: 1500 */
+	u16 rx_time_bt_hp_fast;
+	u16 tx_time_bt_hp_fast;
+
+	/* range: 2000-65535  default: 8700 */
+	u16 wlan_cycle_fast;
+
+	/* range: 0 - 15000 (Msec) default: 1000 */
+	u16 bt_anti_starvation_period;
+
+	/* range 400-10000(Usec) default: 3000 */
+	u16 next_bt_lp_packet;
+
+	/* Deafult: worst case for BT DH5 traffic */
+	u16 wake_up_beacon;
+
+	/* range: 0-50000(Usec) default: 1050 */
+	u16 hp_dm_max_guard_time;
+
+	/*
+	 * This is to prevent both BT & WLAN antenna
+	 * starvation.
+	 * Range: 100-50000(Usec) default:2550
+	 */
+	u16 next_wlan_packet;
+
+	/* 0 -> shared antenna */
+	u8 antenna_type;
+
+	/*
+	 * 0 -> TI legacy
+	 * 1 -> Palau
+	 */
+	u8 signal_type;
+
+	/*
+	 * BT AFH status
+	 * 0 -> no AFH
+	 * 1 -> from dedicated GPIO
+	 * 2 -> AFH on (from host)
+	 */
+	u8 afh_leverage_on;
+
+	/*
+	 * The number of cycles during which no
+	 * TX will be sent after 1 cycle of RX
+	 * transaction in protective mode
+	 */
+	u8 quiet_cycle_num;
+
+	/*
+	 * The maximum number of CTSs that will
+	 * be sent for receiving RX packet in
+	 * protective mode
+	 */
+	u8 max_cts;
+
+	/*
+	 * The number of WLAN packets
+	 * transferred in common mode before
+	 * switching to BT.
+	 */
+	u8 wlan_packets_num;
+
+	/*
+	 * The number of BT packets
+	 * transferred in common mode before
+	 * switching to WLAN.
+	 */
+	u8 bt_packets_num;
+
+	/* range: 1-255  default: 5 */
+	u8 missed_rx_avalanche;
+
+	/* range: 0-1    default: 1 */
+	u8 wlan_elp_hp;
+
+	/* range: 0 - 15  default: 4 */
+	u8 bt_anti_starvation_cycles;
+
+	u8 ack_mode_dual_ant;
+
+	/*
+	 * Allow PA_SD assertion/de-assertion
+	 * during enabled BT activity.
+	 */
+	u8 pa_sd_enable;
+
+	/*
+	 * Enable/Disable PTA in auto mode:
+	 * Support Both Active & P.S modes
+	 */
+	u8 pta_auto_mode_enable;
+
+	/* range: 0 - 20  default: 1 */
+	u8 bt_hp_respected_num;
+} __packed;
+
+#define CCA_THRSH_ENABLE_ENERGY_D       0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D      0xFFEF
+
+struct acx_energy_detection {
+	struct acx_header header;
+
+	/* The RX Clear Channel Assessment threshold in the PHY */
+	u16 rx_cca_threshold;
+	u8 tx_energy_detection;
+	u8 pad;
+} __packed;
+
+#define BCN_RX_TIMEOUT_DEF_VALUE        10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE  20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE    1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+	struct acx_header header;
+
+	u16 beacon_rx_timeout;
+	u16 broadcast_timeout;
+
+	/* Enables receiving of broadcast packets in PS mode */
+	u8 rx_broadcast_in_ps;
+
+	/* Consecutive PS Poll failures before updating the host */
+	u8 ps_poll_threshold;
+	u8 pad[2];
+} __packed;
+
+struct acx_event_mask {
+	struct acx_header header;
+
+	u32 event_mask;
+	u32 high_event_mask; /* Unused */
+} __packed;
+
+#define CFG_RX_FCS		BIT(2)
+#define CFG_RX_ALL_GOOD		BIT(3)
+#define CFG_UNI_FILTER_EN	BIT(4)
+#define CFG_BSSID_FILTER_EN	BIT(5)
+#define CFG_MC_FILTER_EN	BIT(6)
+#define CFG_MC_ADDR0_EN		BIT(7)
+#define CFG_MC_ADDR1_EN		BIT(8)
+#define CFG_BC_REJECT_EN	BIT(9)
+#define CFG_SSID_FILTER_EN	BIT(10)
+#define CFG_RX_INT_FCS_ERROR	BIT(11)
+#define CFG_RX_INT_ENCRYPTED	BIT(12)
+#define CFG_RX_WR_RX_STATUS	BIT(13)
+#define CFG_RX_FILTER_NULTI	BIT(14)
+#define CFG_RX_RESERVE		BIT(15)
+#define CFG_RX_TIMESTAMP_TSF	BIT(16)
+
+#define CFG_RX_RSV_EN		BIT(0)
+#define CFG_RX_RCTS_ACK		BIT(1)
+#define CFG_RX_PRSP_EN		BIT(2)
+#define CFG_RX_PREQ_EN		BIT(3)
+#define CFG_RX_MGMT_EN		BIT(4)
+#define CFG_RX_FCS_ERROR	BIT(5)
+#define CFG_RX_DATA_EN		BIT(6)
+#define CFG_RX_CTL_EN		BIT(7)
+#define CFG_RX_CF_EN		BIT(8)
+#define CFG_RX_BCN_EN		BIT(9)
+#define CFG_RX_AUTH_EN		BIT(10)
+#define CFG_RX_ASSOC_EN		BIT(11)
+
+#define SCAN_PASSIVE		BIT(0)
+#define SCAN_5GHZ_BAND		BIT(1)
+#define SCAN_TRIGGERED		BIT(2)
+#define SCAN_PRIORITY_HIGH	BIT(3)
+
+struct acx_fw_gen_frame_rates {
+	struct acx_header header;
+
+	u8 tx_ctrl_frame_rate; /* RATE_* */
+	u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
+	u8 tx_mgt_frame_rate;
+	u8 tx_mgt_frame_mod;
+} __packed;
+
+/* STA MAC */
+struct acx_dot11_station_id {
+	struct acx_header header;
+
+	u8 mac[ETH_ALEN];
+	u8 pad[2];
+} __packed;
+
+struct acx_feature_config {
+	struct acx_header header;
+
+	u32 options;
+	u32 data_flow_options;
+} __packed;
+
+struct acx_current_tx_power {
+	struct acx_header header;
+
+	u8  current_tx_power;
+	u8  padding[3];
+} __packed;
+
+struct acx_dot11_default_key {
+	struct acx_header header;
+
+	u8 id;
+	u8 pad[3];
+} __packed;
+
+struct acx_tsf_info {
+	struct acx_header header;
+
+	u32 current_tsf_msb;
+	u32 current_tsf_lsb;
+	u32 last_TBTT_msb;
+	u32 last_TBTT_lsb;
+	u8 last_dtim_count;
+	u8 pad[3];
+} __packed;
+
+enum acx_wake_up_event {
+	WAKE_UP_EVENT_BEACON_BITMAP	= 0x01, /* Wake on every Beacon*/
+	WAKE_UP_EVENT_DTIM_BITMAP	= 0x02,	/* Wake on every DTIM*/
+	WAKE_UP_EVENT_N_DTIM_BITMAP	= 0x04, /* Wake on every Nth DTIM */
+	WAKE_UP_EVENT_N_BEACONS_BITMAP	= 0x08, /* Wake on every Nth Beacon */
+	WAKE_UP_EVENT_BITS_MASK		= 0x0F
+};
+
+struct acx_wake_up_condition {
+	struct acx_header header;
+
+	u8 wake_up_event; /* Only one bit can be set */
+	u8 listen_interval;
+	u8 pad[2];
+} __packed;
+
+struct acx_aid {
+	struct acx_header header;
+
+	/*
+	 * To be set when associated with an AP.
+	 */
+	u16 aid;
+	u8 pad[2];
+} __packed;
+
+enum acx_preamble_type {
+	ACX_PREAMBLE_LONG = 0,
+	ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+	struct acx_header header;
+
+	/*
+	 * When set, the WiLink transmits the frames with a short preamble and
+	 * when cleared, the WiLink transmits the frames with a long preamble.
+	 */
+	u8 preamble;
+	u8 padding[3];
+} __packed;
+
+enum acx_ctsprotect_type {
+	CTSPROTECT_DISABLE = 0,
+	CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+	struct acx_header header;
+	u8 ctsprotect;
+	u8 padding[3];
+} __packed;
+
+struct acx_tx_statistics {
+	u32 internal_desc_overflow;
+}  __packed;
+
+struct acx_rx_statistics {
+	u32 out_of_mem;
+	u32 hdr_overflow;
+	u32 hw_stuck;
+	u32 dropped;
+	u32 fcs_err;
+	u32 xfr_hint_trig;
+	u32 path_reset;
+	u32 reset_counter;
+} __packed;
+
+struct acx_dma_statistics {
+	u32 rx_requested;
+	u32 rx_errors;
+	u32 tx_requested;
+	u32 tx_errors;
+}  __packed;
+
+struct acx_isr_statistics {
+	/* host command complete */
+	u32 cmd_cmplt;
+
+	/* fiqisr() */
+	u32 fiqs;
+
+	/* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+	u32 rx_headers;
+
+	/* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+	u32 rx_completes;
+
+	/* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+	u32 rx_mem_overflow;
+
+	/* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+	u32 rx_rdys;
+
+	/* irqisr() */
+	u32 irqs;
+
+	/* (INT_STS_ND & INT_TRIG_TX_PROC) */
+	u32 tx_procs;
+
+	/* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+	u32 decrypt_done;
+
+	/* (INT_STS_ND & INT_TRIG_DMA0) */
+	u32 dma0_done;
+
+	/* (INT_STS_ND & INT_TRIG_DMA1) */
+	u32 dma1_done;
+
+	/* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+	u32 tx_exch_complete;
+
+	/* (INT_STS_ND & INT_TRIG_COMMAND) */
+	u32 commands;
+
+	/* (INT_STS_ND & INT_TRIG_RX_PROC) */
+	u32 rx_procs;
+
+	/* (INT_STS_ND & INT_TRIG_PM_802) */
+	u32 hw_pm_mode_changes;
+
+	/* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+	u32 host_acknowledges;
+
+	/* (INT_STS_ND & INT_TRIG_PM_PCI) */
+	u32 pci_pm;
+
+	/* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+	u32 wakeups;
+
+	/* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+	u32 low_rssi;
+} __packed;
+
+struct acx_wep_statistics {
+	/* WEP address keys configured */
+	u32 addr_key_count;
+
+	/* default keys configured */
+	u32 default_key_count;
+
+	u32 reserved;
+
+	/* number of times that WEP key not found on lookup */
+	u32 key_not_found;
+
+	/* number of times that WEP key decryption failed */
+	u32 decrypt_fail;
+
+	/* WEP packets decrypted */
+	u32 packets;
+
+	/* WEP decrypt interrupts */
+	u32 interrupt;
+} __packed;
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+	/* the amount of enters into power save mode (both PD & ELP) */
+	u32 ps_enter;
+
+	/* the amount of enters into ELP mode */
+	u32 elp_enter;
+
+	/* the amount of missing beacon interrupts to the host */
+	u32 missing_bcns;
+
+	/* the amount of wake on host-access times */
+	u32 wake_on_host;
+
+	/* the amount of wake on timer-expire */
+	u32 wake_on_timer_exp;
+
+	/* the number of packets that were transmitted with PS bit set */
+	u32 tx_with_ps;
+
+	/* the number of packets that were transmitted with PS bit clear */
+	u32 tx_without_ps;
+
+	/* the number of received beacons */
+	u32 rcvd_beacons;
+
+	/* the number of entering into PowerOn (power save off) */
+	u32 power_save_off;
+
+	/* the number of entries into power save mode */
+	u16 enable_ps;
+
+	/*
+	 * the number of exits from power save, not including failed PS
+	 * transitions
+	 */
+	u16 disable_ps;
+
+	/*
+	 * the number of times the TSF counter was adjusted because
+	 * of drift
+	 */
+	u32 fix_tsf_ps;
+
+	/* Gives statistics about the spread continuous missed beacons.
+	 * The 16 LSB are dedicated for the PS mode.
+	 * The 16 MSB are dedicated for the PS mode.
+	 * cont_miss_bcns_spread[0] - single missed beacon.
+	 * cont_miss_bcns_spread[1] - two continuous missed beacons.
+	 * cont_miss_bcns_spread[2] - three continuous missed beacons.
+	 * ...
+	 * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+	*/
+	u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+	/* the number of beacons in awake mode */
+	u32 rcvd_awake_beacons;
+} __packed;
+
+struct acx_mic_statistics {
+	u32 rx_pkts;
+	u32 calc_failure;
+} __packed;
+
+struct acx_aes_statistics {
+	u32 encrypt_fail;
+	u32 decrypt_fail;
+	u32 encrypt_packets;
+	u32 decrypt_packets;
+	u32 encrypt_interrupt;
+	u32 decrypt_interrupt;
+} __packed;
+
+struct acx_event_statistics {
+	u32 heart_beat;
+	u32 calibration;
+	u32 rx_mismatch;
+	u32 rx_mem_empty;
+	u32 rx_pool;
+	u32 oom_late;
+	u32 phy_transmit_error;
+	u32 tx_stuck;
+} __packed;
+
+struct acx_ps_statistics {
+	u32 pspoll_timeouts;
+	u32 upsd_timeouts;
+	u32 upsd_max_sptime;
+	u32 upsd_max_apturn;
+	u32 pspoll_max_apturn;
+	u32 pspoll_utilization;
+	u32 upsd_utilization;
+} __packed;
+
+struct acx_rxpipe_statistics {
+	u32 rx_prep_beacon_drop;
+	u32 descr_host_int_trig_rx_data;
+	u32 beacon_buffer_thres_host_int_trig_rx_data;
+	u32 missed_beacon_host_int_trig_rx_data;
+	u32 tx_xfr_host_int_trig_rx_data;
+} __packed;
+
+struct acx_statistics {
+	struct acx_header header;
+
+	struct acx_tx_statistics tx;
+	struct acx_rx_statistics rx;
+	struct acx_dma_statistics dma;
+	struct acx_isr_statistics isr;
+	struct acx_wep_statistics wep;
+	struct acx_pwr_statistics pwr;
+	struct acx_aes_statistics aes;
+	struct acx_mic_statistics mic;
+	struct acx_event_statistics event;
+	struct acx_ps_statistics ps;
+	struct acx_rxpipe_statistics rxpipe;
+} __packed;
+
+#define ACX_MAX_RATE_CLASSES       8
+#define ACX_RATE_MASK_UNSPECIFIED  0
+#define ACX_RATE_RETRY_LIMIT      10
+
+struct acx_rate_class {
+	u32 enabled_rates;
+	u8 short_retry_limit;
+	u8 long_retry_limit;
+	u8 aflags;
+	u8 reserved;
+} __packed;
+
+struct acx_rate_policy {
+	struct acx_header header;
+
+	u32 rate_class_cnt;
+	struct acx_rate_class rate_class[ACX_MAX_RATE_CLASSES];
+} __packed;
+
+struct wl1251_acx_memory {
+	__le16 num_stations; /* number of STAs to be supported. */
+	u16 reserved_1;
+
+	/*
+	 * Nmber of memory buffers for the RX mem pool.
+	 * The actual number may be less if there are
+	 * not enough blocks left for the minimum num
+	 * of TX ones.
+	 */
+	u8 rx_mem_block_num;
+	u8 reserved_2;
+	u8 num_tx_queues; /* From 1 to 16 */
+	u8 host_if_options; /* HOST_IF* */
+	u8 tx_min_mem_block_num;
+	u8 num_ssid_profiles;
+	__le16 debug_buffer_size;
+} __packed;
+
+
+#define ACX_RX_DESC_MIN                1
+#define ACX_RX_DESC_MAX                127
+#define ACX_RX_DESC_DEF                32
+struct wl1251_acx_rx_queue_config {
+	u8 num_descs;
+	u8 pad;
+	u8 type;
+	u8 priority;
+	__le32 dma_address;
+} __packed;
+
+#define ACX_TX_DESC_MIN                1
+#define ACX_TX_DESC_MAX                127
+#define ACX_TX_DESC_DEF                16
+struct wl1251_acx_tx_queue_config {
+    u8 num_descs;
+    u8 pad[2];
+    u8 attributes;
+} __packed;
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+	struct acx_header header;
+
+	struct wl1251_acx_memory mem_config;
+	struct wl1251_acx_rx_queue_config rx_queue_config;
+	struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __packed;
+
+struct wl1251_acx_mem_map {
+	struct acx_header header;
+
+	void *code_start;
+	void *code_end;
+
+	void *wep_defkey_start;
+	void *wep_defkey_end;
+
+	void *sta_table_start;
+	void *sta_table_end;
+
+	void *packet_template_start;
+	void *packet_template_end;
+
+	void *queue_memory_start;
+	void *queue_memory_end;
+
+	void *packet_memory_pool_start;
+	void *packet_memory_pool_end;
+
+	void *debug_buffer1_start;
+	void *debug_buffer1_end;
+
+	void *debug_buffer2_start;
+	void *debug_buffer2_end;
+
+	/* Number of blocks FW allocated for TX packets */
+	u32 num_tx_mem_blocks;
+
+	/* Number of blocks FW allocated for RX packets */
+	u32 num_rx_mem_blocks;
+} __packed;
+
+
+struct wl1251_acx_wr_tbtt_and_dtim {
+
+	struct acx_header header;
+
+	/* Time in TUs between two consecutive beacons */
+	u16 tbtt;
+
+	/*
+	 * DTIM period
+	 * For BSS: Number of TBTTs in a DTIM period (range: 1-10)
+	 * For IBSS: value shall be set to 1
+	*/
+	u8  dtim;
+	u8  padding;
+} __packed;
+
+enum wl1251_acx_bet_mode {
+	WL1251_ACX_BET_DISABLE = 0,
+	WL1251_ACX_BET_ENABLE = 1,
+};
+
+struct wl1251_acx_bet_enable {
+	struct acx_header header;
+
+	/*
+	 * Specifies if beacon early termination procedure is enabled or
+	 * disabled, see enum wl1251_acx_bet_mode.
+	 */
+	u8 enable;
+
+	/*
+	 * Specifies the maximum number of consecutive beacons that may be
+	 * early terminated. After this number is reached at least one full
+	 * beacon must be correctly received in FW before beacon ET
+	 * resumes. Range 0 - 255.
+	 */
+	u8 max_consecutive;
+
+	u8 padding[2];
+} __packed;
+
+struct wl1251_acx_ac_cfg {
+	struct acx_header header;
+
+	/*
+	 * Access Category - The TX queue's access category
+	 * (refer to AccessCategory_enum)
+	 */
+	u8 ac;
+
+	/*
+	 * The contention window minimum size (in slots) for
+	 * the access class.
+	 */
+	u8 cw_min;
+
+	/*
+	 * The contention window maximum size (in slots) for
+	 * the access class.
+	 */
+	u16 cw_max;
+
+	/* The AIF value (in slots) for the access class. */
+	u8 aifsn;
+
+	u8 reserved;
+
+	/* The TX Op Limit (in microseconds) for the access class. */
+	u16 txop_limit;
+} __packed;
+
+
+enum wl1251_acx_channel_type {
+	CHANNEL_TYPE_DCF	= 0,
+	CHANNEL_TYPE_EDCF	= 1,
+	CHANNEL_TYPE_HCCA	= 2,
+};
+
+enum wl1251_acx_ps_scheme {
+	/* regular ps: simple sending of packets */
+	WL1251_ACX_PS_SCHEME_LEGACY	= 0,
+
+	/* sending a packet triggers a unscheduled apsd downstream */
+	WL1251_ACX_PS_SCHEME_UPSD_TRIGGER	= 1,
+
+	/* a pspoll packet will be sent before every data packet */
+	WL1251_ACX_PS_SCHEME_LEGACY_PSPOLL	= 2,
+
+	/* scheduled apsd mode */
+	WL1251_ACX_PS_SCHEME_SAPSD		= 3,
+};
+
+enum wl1251_acx_ack_policy {
+	WL1251_ACX_ACK_POLICY_LEGACY	= 0,
+	WL1251_ACX_ACK_POLICY_NO_ACK	= 1,
+	WL1251_ACX_ACK_POLICY_BLOCK	= 2,
+};
+
+struct wl1251_acx_tid_cfg {
+	struct acx_header header;
+
+	/* tx queue id number (0-7) */
+	u8 queue;
+
+	/* channel access type for the queue, enum wl1251_acx_channel_type */
+	u8 type;
+
+	/* EDCA: ac index (0-3), HCCA: traffic stream id (8-15) */
+	u8 tsid;
+
+	/* ps scheme of the specified queue, enum wl1251_acx_ps_scheme */
+	u8 ps_scheme;
+
+	/* the tx queue ack policy, enum wl1251_acx_ack_policy */
+	u8 ack_policy;
+
+	u8 padding[3];
+
+	/* not supported */
+	u32 apsdconf[2];
+} __packed;
+
+/*************************************************************************
+
+    Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA      BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT	BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR		BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA	BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A		BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B		BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST	BIT(6)
+
+/* Trace message on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A		BIT(7)
+
+/* Trace message on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B		BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE	BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE	BIT(14)
+
+#define WL1251_ACX_INTR_ALL           0xFFFFFFFF
+
+enum {
+	ACX_WAKE_UP_CONDITIONS      = 0x0002,
+	ACX_MEM_CFG                 = 0x0003,
+	ACX_SLOT                    = 0x0004,
+	ACX_QUEUE_HEAD              = 0x0005, /* for MASTER mode only */
+	ACX_AC_CFG                  = 0x0007,
+	ACX_MEM_MAP                 = 0x0008,
+	ACX_AID                     = 0x000A,
+	ACX_RADIO_PARAM             = 0x000B, /* Not used */
+	ACX_CFG                     = 0x000C, /* Not used */
+	ACX_FW_REV                  = 0x000D,
+	ACX_MEDIUM_USAGE            = 0x000F,
+	ACX_RX_CFG                  = 0x0010,
+	ACX_TX_QUEUE_CFG            = 0x0011, /* FIXME: only used by wl1251 */
+	ACX_BSS_IN_PS               = 0x0012, /* for AP only */
+	ACX_STATISTICS              = 0x0013, /* Debug API */
+	ACX_FEATURE_CFG             = 0x0015,
+	ACX_MISC_CFG                = 0x0017, /* Not used */
+	ACX_TID_CFG                 = 0x001A,
+	ACX_BEACON_FILTER_OPT       = 0x001F,
+	ACX_LOW_RSSI                = 0x0020,
+	ACX_NOISE_HIST              = 0x0021,
+	ACX_HDK_VERSION             = 0x0022, /* ??? */
+	ACX_PD_THRESHOLD            = 0x0023,
+	ACX_DATA_PATH_PARAMS        = 0x0024, /* WO */
+	ACX_DATA_PATH_RESP_PARAMS   = 0x0024, /* RO */
+	ACX_CCA_THRESHOLD           = 0x0025,
+	ACX_EVENT_MBOX_MASK         = 0x0026,
+#ifdef FW_RUNNING_AS_AP
+	ACX_DTIM_PERIOD             = 0x0027, /* for AP only */
+#else
+	ACX_WR_TBTT_AND_DTIM        = 0x0027, /* STA only */
+#endif
+	ACX_ACI_OPTION_CFG          = 0x0029, /* OBSOLETE (for 1251)*/
+	ACX_GPIO_CFG                = 0x002A, /* Not used */
+	ACX_GPIO_SET                = 0x002B, /* Not used */
+	ACX_PM_CFG                  = 0x002C, /* To Be Documented */
+	ACX_CONN_MONIT_PARAMS       = 0x002D,
+	ACX_AVERAGE_RSSI            = 0x002E, /* Not used */
+	ACX_CONS_TX_FAILURE         = 0x002F,
+	ACX_BCN_DTIM_OPTIONS        = 0x0031,
+	ACX_SG_ENABLE               = 0x0032,
+	ACX_SG_CFG                  = 0x0033,
+	ACX_ANTENNA_DIVERSITY_CFG   = 0x0035, /* To Be Documented */
+	ACX_LOW_SNR		    = 0x0037, /* To Be Documented */
+	ACX_BEACON_FILTER_TABLE     = 0x0038,
+	ACX_ARP_IP_FILTER           = 0x0039,
+	ACX_ROAMING_STATISTICS_TBL  = 0x003B,
+	ACX_RATE_POLICY             = 0x003D,
+	ACX_CTS_PROTECTION          = 0x003E,
+	ACX_SLEEP_AUTH              = 0x003F,
+	ACX_PREAMBLE_TYPE	    = 0x0040,
+	ACX_ERROR_CNT               = 0x0041,
+	ACX_FW_GEN_FRAME_RATES      = 0x0042,
+	ACX_IBSS_FILTER		    = 0x0044,
+	ACX_SERVICE_PERIOD_TIMEOUT  = 0x0045,
+	ACX_TSF_INFO                = 0x0046,
+	ACX_CONFIG_PS_WMM           = 0x0049,
+	ACX_ENABLE_RX_DATA_FILTER   = 0x004A,
+	ACX_SET_RX_DATA_FILTER      = 0x004B,
+	ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+	ACX_POWER_LEVEL_TABLE       = 0x004D,
+	ACX_BET_ENABLE              = 0x0050,
+	DOT11_STATION_ID            = 0x1001,
+	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
+	DOT11_CUR_TX_PWR            = 0x100D,
+	DOT11_DEFAULT_KEY           = 0x1010,
+	DOT11_RX_DOT11_MODE         = 0x1012,
+	DOT11_RTS_THRESHOLD         = 0x1013,
+	DOT11_GROUP_ADDRESS_TBL     = 0x1014,
+
+	MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+	MAX_IE = 0xFFFF
+};
+
+
+int wl1251_acx_frame_rates(struct wl1251 *wl, u8 ctrl_rate, u8 ctrl_mod,
+			   u8 mgt_rate, u8 mgt_mod);
+int wl1251_acx_station_id(struct wl1251 *wl);
+int wl1251_acx_default_key(struct wl1251 *wl, u8 key_id);
+int wl1251_acx_wake_up_conditions(struct wl1251 *wl, u8 wake_up_event,
+				  u8 listen_interval);
+int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth);
+int wl1251_acx_fw_version(struct wl1251 *wl, char *buf, size_t len);
+int wl1251_acx_tx_power(struct wl1251 *wl, int power);
+int wl1251_acx_feature_cfg(struct wl1251 *wl);
+int wl1251_acx_mem_map(struct wl1251 *wl,
+		       struct acx_header *mem_map, size_t len);
+int wl1251_acx_data_path_params(struct wl1251 *wl,
+				struct acx_data_path_params_resp *data_path);
+int wl1251_acx_rx_msdu_life_time(struct wl1251 *wl, u32 life_time);
+int wl1251_acx_rx_config(struct wl1251 *wl, u32 config, u32 filter);
+int wl1251_acx_pd_threshold(struct wl1251 *wl);
+int wl1251_acx_slot(struct wl1251 *wl, enum acx_slot_type slot_time);
+int wl1251_acx_group_address_tbl(struct wl1251 *wl);
+int wl1251_acx_service_period_timeout(struct wl1251 *wl);
+int wl1251_acx_rts_threshold(struct wl1251 *wl, u16 rts_threshold);
+int wl1251_acx_beacon_filter_opt(struct wl1251 *wl, bool enable_filter);
+int wl1251_acx_beacon_filter_table(struct wl1251 *wl);
+int wl1251_acx_conn_monit_params(struct wl1251 *wl);
+int wl1251_acx_sg_enable(struct wl1251 *wl);
+int wl1251_acx_sg_cfg(struct wl1251 *wl);
+int wl1251_acx_cca_threshold(struct wl1251 *wl);
+int wl1251_acx_bcn_dtim_options(struct wl1251 *wl);
+int wl1251_acx_aid(struct wl1251 *wl, u16 aid);
+int wl1251_acx_event_mbox_mask(struct wl1251 *wl, u32 event_mask);
+int wl1251_acx_low_rssi(struct wl1251 *wl, s8 threshold, u8 weight,
+			u8 depth, enum wl1251_acx_low_rssi_type type);
+int wl1251_acx_set_preamble(struct wl1251 *wl, enum acx_preamble_type preamble);
+int wl1251_acx_cts_protect(struct wl1251 *wl,
+			    enum acx_ctsprotect_type ctsprotect);
+int wl1251_acx_statistics(struct wl1251 *wl, struct acx_statistics *stats);
+int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime);
+int wl1251_acx_rate_policies(struct wl1251 *wl);
+int wl1251_acx_mem_cfg(struct wl1251 *wl);
+int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim);
+int wl1251_acx_bet_enable(struct wl1251 *wl, enum wl1251_acx_bet_mode mode,
+			  u8 max_consecutive);
+int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
+		      u8 aifs, u16 txop);
+int wl1251_acx_tid_cfg(struct wl1251 *wl, u8 queue,
+		       enum wl1251_acx_channel_type type,
+		       u8 tsid, enum wl1251_acx_ps_scheme ps_scheme,
+		       enum wl1251_acx_ack_policy ack_policy);
+
+#endif /* __WL1251_ACX_H__ */
diff --git a/drivers/net/wireless/ti/wl1251/boot.c b/drivers/net/wireless/ti/wl1251/boot.c
new file mode 100644
index 0000000..a2e5241
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/boot.c
@@ -0,0 +1,554 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/slab.h>
+
+#include "reg.h"
+#include "boot.h"
+#include "io.h"
+#include "spi.h"
+#include "event.h"
+#include "acx.h"
+
+void wl1251_boot_target_enable_interrupts(struct wl1251 *wl)
+{
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+	wl1251_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+int wl1251_boot_soft_reset(struct wl1251 *wl)
+{
+	unsigned long timeout;
+	u32 boot_data;
+
+	/* perform soft reset */
+	wl1251_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+	/* SOFT_RESET is self clearing */
+	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+	while (1) {
+		boot_data = wl1251_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		wl1251_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			/* 1.2 check pWhalBus->uSelfClearTime if the
+			 * timeout was reached */
+			wl1251_error("soft reset timeout");
+			return -1;
+		}
+
+		udelay(SOFT_RESET_STALL_TIME);
+	}
+
+	/* disable Rx/Tx */
+	wl1251_reg_write32(wl, ENABLE, 0x0);
+
+	/* disable auto calibration on start*/
+	wl1251_reg_write32(wl, SPARE_A2, 0xffff);
+
+	return 0;
+}
+
+int wl1251_boot_init_seq(struct wl1251 *wl)
+{
+	u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
+
+	/*
+	 * col #1: INTEGER_DIVIDER
+	 * col #2: FRACTIONAL_DIVIDER
+	 * col #3: ATTN_BB
+	 * col #4: ALPHA_BB
+	 * col #5: STOP_TIME_BB
+	 * col #6: BB_PLL_LOOP_FILTER
+	 */
+	static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
+
+		{   83, 87381,  0xB, 5, 0xF00,  3}, /* REF_FREQ_19_2*/
+		{   61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
+		{   41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
+		{   40, 0,      0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
+		{   47, 162280, 0xC, 6, 0x2760, 1}  /* REF_FREQ_33_6        */
+	};
+
+	/* read NVS params */
+	scr_pad6 = wl1251_reg_read32(wl, SCR_PAD6);
+	wl1251_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+
+	/* read ELP_CMD */
+	elp_cmd = wl1251_reg_read32(wl, ELP_CMD);
+	wl1251_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+
+	/* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
+	ref_freq = scr_pad6 & 0x000000FF;
+	wl1251_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+
+	wl1251_reg_write32(wl, PLL_CAL_TIME, 0x9);
+
+	/*
+	 * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
+	 */
+	wl1251_reg_write32(wl, CLK_BUF_TIME, 0x6);
+
+	/*
+	 * set the clock detect feature to work in the restart wu procedure
+	 * (ELP_CFG_MODE[14]) and Select the clock source type
+	 * (ELP_CFG_MODE[13:12])
+	 */
+	tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
+	wl1251_reg_write32(wl, ELP_CFG_MODE, tmp);
+
+	/* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
+	elp_cmd |= 0x00000040;
+	wl1251_reg_write32(wl, ELP_CMD, elp_cmd);
+
+	/* PG 1.2: Set the BB PLL stable time to be 1000usec
+	 * (PLL_STABLE_TIME) */
+	wl1251_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+
+	/* PG 1.2: read clock request time */
+	init_data = wl1251_reg_read32(wl, CLK_REQ_TIME);
+
+	/*
+	 * PG 1.2: set the clock request time to be ref_clk_settling_time -
+	 * 1ms = 4ms
+	 */
+	if (init_data > 0x21)
+		tmp = init_data - 0x21;
+	else
+		tmp = 0;
+	wl1251_reg_write32(wl, CLK_REQ_TIME, tmp);
+
+	/* set BB PLL configurations in RF AFE */
+	wl1251_reg_write32(wl, 0x003058cc, 0x4B5);
+
+	/* set RF_AFE_REG_5 */
+	wl1251_reg_write32(wl, 0x003058d4, 0x50);
+
+	/* set RF_AFE_CTRL_REG_2 */
+	wl1251_reg_write32(wl, 0x00305948, 0x11c001);
+
+	/*
+	 * change RF PLL and BB PLL divider for VCO clock and adjust VCO
+	 * bais current(RF_AFE_REG_13)
+	 */
+	wl1251_reg_write32(wl, 0x003058f4, 0x1e);
+
+	/* set BB PLL configurations */
+	tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
+	wl1251_reg_write32(wl, 0x00305840, tmp);
+
+	/* set fractional divider according to Appendix C-BB PLL
+	 * Calculations
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
+	wl1251_reg_write32(wl, 0x00305844, tmp);
+
+	/* set the initial data for the sigma delta */
+	wl1251_reg_write32(wl, 0x00305848, 0x3039);
+
+	/*
+	 * set the accumulator attenuation value, calibration loop1
+	 * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
+	 * the VCO gain
+	 */
+	tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
+		(LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
+	wl1251_reg_write32(wl, 0x00305854, tmp);
+
+	/*
+	 * set the calibration stop time after holdoff time expires and set
+	 * settling time HOLD_OFF_TIME_BB
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
+	wl1251_reg_write32(wl, 0x00305858, tmp);
+
+	/*
+	 * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
+	 * constant leakage current to linearize PFD to 0uA -
+	 * BB_ILOOPF[7:3]
+	 */
+	tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
+	wl1251_reg_write32(wl, 0x003058f8, tmp);
+
+	/*
+	 * set regulator output voltage for n divider to
+	 * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
+	 * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
+	 * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
+	 */
+	wl1251_reg_write32(wl, 0x003058f0, 0x29);
+
+	/* enable restart wakeup sequence (ELP_CMD[0]) */
+	wl1251_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+
+	/* restart sequence completed */
+	udelay(2000);
+
+	return 0;
+}
+
+static void wl1251_boot_set_ecpu_ctrl(struct wl1251 *wl, u32 flag)
+{
+	u32 cpu_ctrl;
+
+	/* 10.5.0 run the firmware (I) */
+	cpu_ctrl = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	/* 10.5.1 run the firmware (II) */
+	cpu_ctrl &= ~flag;
+	wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+int wl1251_boot_run_firmware(struct wl1251 *wl)
+{
+	int loop, ret;
+	u32 chip_id, acx_intr;
+
+	wl1251_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+	chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
+
+	wl1251_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+	if (chip_id != wl->chip_id) {
+		wl1251_error("chip id doesn't match after firmware boot");
+		return -EIO;
+	}
+
+	/* wait for init to complete */
+	loop = 0;
+	while (loop++ < INIT_LOOP) {
+		udelay(INIT_LOOP_DELAY);
+		acx_intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+		if (acx_intr == 0xffffffff) {
+			wl1251_error("error reading hardware complete "
+				     "init indication");
+			return -EIO;
+		}
+		/* check that ACX_INTR_INIT_COMPLETE is enabled */
+		else if (acx_intr & WL1251_ACX_INTR_INIT_COMPLETE) {
+			wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+					   WL1251_ACX_INTR_INIT_COMPLETE);
+			break;
+		}
+	}
+
+	if (loop > INIT_LOOP) {
+		wl1251_error("timeout waiting for the hardware to "
+			     "complete initialization");
+		return -EIO;
+	}
+
+	/* get hardware config command mail box */
+	wl->cmd_box_addr = wl1251_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+	/* get hardware config event mail box */
+	wl->event_box_addr = wl1251_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+	/* set the working partition to its "running" mode offset */
+	wl1251_set_partition(wl, WL1251_PART_WORK_MEM_START,
+			     WL1251_PART_WORK_MEM_SIZE,
+			     WL1251_PART_WORK_REG_START,
+			     WL1251_PART_WORK_REG_SIZE);
+
+	wl1251_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+		     wl->cmd_box_addr, wl->event_box_addr);
+
+	wl1251_acx_fw_version(wl, wl->fw_ver, sizeof(wl->fw_ver));
+
+	/*
+	 * in case of full asynchronous mode the firmware event must be
+	 * ready to receive event from the command mailbox
+	 */
+
+	/* enable gpio interrupts */
+	wl1251_enable_interrupts(wl);
+
+	/* Enable target's interrupts */
+	wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+		WL1251_ACX_INTR_RX1_DATA |
+		WL1251_ACX_INTR_TX_RESULT |
+		WL1251_ACX_INTR_EVENT_A |
+		WL1251_ACX_INTR_EVENT_B |
+		WL1251_ACX_INTR_INIT_COMPLETE;
+	wl1251_boot_target_enable_interrupts(wl);
+
+	wl->event_mask = SCAN_COMPLETE_EVENT_ID | BSS_LOSE_EVENT_ID |
+		SYNCHRONIZATION_TIMEOUT_EVENT_ID |
+		ROAMING_TRIGGER_LOW_RSSI_EVENT_ID |
+		ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID |
+		REGAINED_BSS_EVENT_ID | BT_PTA_SENSE_EVENT_ID |
+		BT_PTA_PREDICTION_EVENT_ID | JOIN_EVENT_COMPLETE_ID;
+
+	ret = wl1251_event_unmask(wl);
+	if (ret < 0) {
+		wl1251_error("EVENT mask setting failed");
+		return ret;
+	}
+
+	wl1251_event_mbox_config(wl);
+
+	/* firmware startup completed */
+	return 0;
+}
+
+static int wl1251_boot_upload_firmware(struct wl1251 *wl)
+{
+	int addr, chunk_num, partition_limit;
+	size_t fw_data_len, len;
+	u8 *p, *buf;
+
+	/* whal_FwCtrl_LoadFwImageSm() */
+
+	wl1251_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+		     wl1251_reg_read32(wl, CHIP_ID_B));
+
+	/* 10.0 check firmware length and set partition */
+	fw_data_len =  (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+		(wl->fw[6] << 8) | (wl->fw[7]);
+
+	wl1251_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
+		CHUNK_SIZE);
+
+	if ((fw_data_len % 4) != 0) {
+		wl1251_error("firmware length not multiple of four");
+		return -EIO;
+	}
+
+	buf = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!buf) {
+		wl1251_error("allocation for firmware upload chunk failed");
+		return -ENOMEM;
+	}
+
+	wl1251_set_partition(wl, WL1251_PART_DOWN_MEM_START,
+			     WL1251_PART_DOWN_MEM_SIZE,
+			     WL1251_PART_DOWN_REG_START,
+			     WL1251_PART_DOWN_REG_SIZE);
+
+	/* 10.1 set partition limit and chunk num */
+	chunk_num = 0;
+	partition_limit = WL1251_PART_DOWN_MEM_SIZE;
+
+	while (chunk_num < fw_data_len / CHUNK_SIZE) {
+		/* 10.2 update partition, if needed */
+		addr = WL1251_PART_DOWN_MEM_START +
+			(chunk_num + 2) * CHUNK_SIZE;
+		if (addr > partition_limit) {
+			addr = WL1251_PART_DOWN_MEM_START +
+				chunk_num * CHUNK_SIZE;
+			partition_limit = chunk_num * CHUNK_SIZE +
+				WL1251_PART_DOWN_MEM_SIZE;
+			wl1251_set_partition(wl,
+					     addr,
+					     WL1251_PART_DOWN_MEM_SIZE,
+					     WL1251_PART_DOWN_REG_START,
+					     WL1251_PART_DOWN_REG_SIZE);
+		}
+
+		/* 10.3 upload the chunk */
+		addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
+		p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+		wl1251_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+			     p, addr);
+
+		/* need to copy the chunk for dma */
+		len = CHUNK_SIZE;
+		memcpy(buf, p, len);
+		wl1251_mem_write(wl, addr, buf, len);
+
+		chunk_num++;
+	}
+
+	/* 10.4 upload the last chunk */
+	addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
+	p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+
+	/* need to copy the chunk for dma */
+	len = fw_data_len % CHUNK_SIZE;
+	memcpy(buf, p, len);
+
+	wl1251_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
+		     len, p, addr);
+	wl1251_mem_write(wl, addr, buf, len);
+
+	kfree(buf);
+
+	return 0;
+}
+
+static int wl1251_boot_upload_nvs(struct wl1251 *wl)
+{
+	size_t nvs_len, nvs_bytes_written, burst_len;
+	int nvs_start, i;
+	u32 dest_addr, val;
+	u8 *nvs_ptr, *nvs;
+
+	nvs = wl->nvs;
+	if (nvs == NULL)
+		return -ENODEV;
+
+	nvs_ptr = nvs;
+
+	nvs_len = wl->nvs_len;
+	nvs_start = wl->fw_len;
+
+	/*
+	 * Layout before the actual NVS tables:
+	 * 1 byte : burst length.
+	 * 2 bytes: destination address.
+	 * n bytes: data to burst copy.
+	 *
+	 * This is ended by a 0 length, then the NVS tables.
+	 */
+
+	while (nvs_ptr[0]) {
+		burst_len = nvs_ptr[0];
+		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+		/* We move our pointer to the data */
+		nvs_ptr += 3;
+
+		for (i = 0; i < burst_len; i++) {
+			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+			wl1251_debug(DEBUG_BOOT,
+				     "nvs burst write 0x%x: 0x%x",
+				     dest_addr, val);
+			wl1251_mem_write32(wl, dest_addr, val);
+
+			nvs_ptr += 4;
+			dest_addr += 4;
+		}
+	}
+
+	/*
+	 * We've reached the first zero length, the first NVS table
+	 * is 7 bytes further.
+	 */
+	nvs_ptr += 7;
+	nvs_len -= nvs_ptr - nvs;
+	nvs_len = ALIGN(nvs_len, 4);
+
+	/* Now we must set the partition correctly */
+	wl1251_set_partition(wl, nvs_start,
+			     WL1251_PART_DOWN_MEM_SIZE,
+			     WL1251_PART_DOWN_REG_START,
+			     WL1251_PART_DOWN_REG_SIZE);
+
+	/* And finally we upload the NVS tables */
+	nvs_bytes_written = 0;
+	while (nvs_bytes_written < nvs_len) {
+		val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+		       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+		wl1251_debug(DEBUG_BOOT,
+			     "nvs write table 0x%x: 0x%x",
+			     nvs_start, val);
+		wl1251_mem_write32(wl, nvs_start, val);
+
+		nvs_ptr += 4;
+		nvs_bytes_written += 4;
+		nvs_start += 4;
+	}
+
+	return 0;
+}
+
+int wl1251_boot(struct wl1251 *wl)
+{
+	int ret = 0, minor_minor_e2_ver;
+	u32 tmp, boot_data;
+
+	/* halt embedded ARM CPU while loading firmware */
+	wl1251_reg_write32(wl, ACX_REG_ECPU_CONTROL, ECPU_CONTROL_HALT);
+
+	ret = wl1251_boot_soft_reset(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 2. start processing NVS file */
+	if (wl->use_eeprom) {
+		wl1251_reg_write32(wl, ACX_REG_EE_START, START_EEPROM_MGR);
+		/* Wait for EEPROM NVS burst read to complete */
+		msleep(40);
+		wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, USE_EEPROM);
+	} else {
+		ret = wl1251_boot_upload_nvs(wl);
+		if (ret < 0)
+			goto out;
+
+		/* write firmware's last address (ie. it's length) to
+		 * ACX_EEPROMLESS_IND_REG */
+		wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+	}
+
+	/* 6. read the EEPROM parameters */
+	tmp = wl1251_reg_read32(wl, SCR_PAD2);
+
+	/* 7. read bootdata */
+	wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+	wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+	tmp = wl1251_reg_read32(wl, SCR_PAD3);
+
+	/* 8. check bootdata and call restart sequence */
+	wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+	minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+	wl1251_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+		     "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+		     wl->boot_attr.radio_type, wl->boot_attr.major,
+		     wl->boot_attr.minor, minor_minor_e2_ver);
+
+	ret = wl1251_boot_init_seq(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 9. NVS processing done */
+	boot_data = wl1251_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	wl1251_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+	/* 10. check that ECPU_CONTROL_HALT bits are set in
+	 * pWhalBus->uBootData and start uploading firmware
+	 */
+	if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+		wl1251_error("boot failed, ECPU_CONTROL_HALT not set");
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = wl1251_boot_upload_firmware(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 10.5 start firmware */
+	ret = wl1251_boot_run_firmware(wl);
+	if (ret < 0)
+		goto out;
+
+out:
+	return ret;
+}
diff --git a/drivers/net/wireless/ti/wl1251/boot.h b/drivers/net/wireless/ti/wl1251/boot.h
new file mode 100644
index 0000000..7661bc5
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/boot.h
@@ -0,0 +1,39 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl1251.h"
+
+int wl1251_boot_soft_reset(struct wl1251 *wl);
+int wl1251_boot_init_seq(struct wl1251 *wl);
+int wl1251_boot_run_firmware(struct wl1251 *wl);
+void wl1251_boot_target_enable_interrupts(struct wl1251 *wl);
+int wl1251_boot(struct wl1251 *wl);
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
new file mode 100644
index 0000000..d14d69d
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -0,0 +1,496 @@
+#include "cmd.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/crc7.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "io.h"
+#include "ps.h"
+#include "acx.h"
+
+/**
+ * send command to firmware
+ *
+ * @wl: wl struct
+ * @id: command id
+ * @buf: buffer containing the command, must work with dma
+ * @len: length of the buffer
+ */
+int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+	struct wl1251_cmd_header *cmd;
+	unsigned long timeout;
+	u32 intr;
+	int ret = 0;
+
+	cmd = buf;
+	cmd->id = id;
+	cmd->status = 0;
+
+	WARN_ON(len % 4 != 0);
+
+	wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
+
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
+
+	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
+		if (time_after(jiffies, timeout)) {
+			wl1251_error("command complete timeout");
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+
+		msleep(1);
+
+		intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	}
+
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			   WL1251_ACX_INTR_CMD_COMPLETE);
+
+out:
+	return ret;
+}
+
+/**
+ * send test command to firmware
+ *
+ * @wl: wl struct
+ * @buf: buffer containing the command, with all headers, must work with dma
+ * @len: length of the buffer
+ * @answer: is answer needed
+ */
+int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
+{
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd test");
+
+	ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
+
+	if (ret < 0) {
+		wl1251_warning("TEST command failed");
+		return ret;
+	}
+
+	if (answer) {
+		struct wl1251_command *cmd_answer;
+
+		/*
+		 * The test command got in, we can read the answer.
+		 * The answer would be a wl1251_command, where the
+		 * parameter array contains the actual answer.
+		 */
+		wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+		cmd_answer = buf;
+
+		if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
+			wl1251_error("TEST command answer error: %d",
+				     cmd_answer->header.status);
+	}
+
+	return 0;
+}
+
+/**
+ * read acx from firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer for the response, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+	struct acx_header *acx = buf;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd interrogate");
+
+	acx->id = id;
+
+	/* payload length, does not include any headers */
+	acx->len = len - sizeof(*acx);
+
+	ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_error("INTERROGATE command failed");
+		goto out;
+	}
+
+	/* the interrogate command got in, we can read the answer */
+	wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
+
+	acx = buf;
+	if (acx->cmd.status != CMD_STATUS_SUCCESS)
+		wl1251_error("INTERROGATE command error: %d",
+			     acx->cmd.status);
+
+out:
+	return ret;
+}
+
+/**
+ * write acx value to firmware
+ *
+ * @wl: wl struct
+ * @id: acx id
+ * @buf: buffer containing acx, including all headers, must work with dma
+ * @len: length of buf
+ */
+int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
+{
+	struct acx_header *acx = buf;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd configure");
+
+	acx->id = id;
+
+	/* payload length, does not include any headers */
+	acx->len = len - sizeof(*acx);
+
+	ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
+	if (ret < 0) {
+		wl1251_warning("CONFIGURE command NOK");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+	struct wl1251_cmd_vbm_update *vbm;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd vbm");
+
+	vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
+	if (!vbm) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Count and period will be filled by the target */
+	vbm->tim.bitmap_ctrl = bitmap_control;
+	if (bitmap_len > PARTIAL_VBM_MAX) {
+		wl1251_warning("cmd vbm len is %d B, truncating to %d",
+			       bitmap_len, PARTIAL_VBM_MAX);
+		bitmap_len = PARTIAL_VBM_MAX;
+	}
+	memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
+	vbm->tim.identity = identity;
+	vbm->tim.length = bitmap_len + 3;
+
+	vbm->len = cpu_to_le16(bitmap_len + 5);
+
+	ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
+	if (ret < 0) {
+		wl1251_error("VBM command failed");
+		goto out;
+	}
+
+out:
+	kfree(vbm);
+	return ret;
+}
+
+int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
+{
+	struct cmd_enabledisable_path *cmd;
+	int ret;
+	u16 cmd_rx, cmd_tx;
+
+	wl1251_debug(DEBUG_CMD, "cmd data path");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->channel = channel;
+
+	if (enable) {
+		cmd_rx = CMD_ENABLE_RX;
+		cmd_tx = CMD_ENABLE_TX;
+	} else {
+		cmd_rx = CMD_DISABLE_RX;
+		cmd_tx = CMD_DISABLE_TX;
+	}
+
+	ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("rx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+	ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("tx %s cmd for channel %d failed",
+			     enable ? "start" : "stop", channel);
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+		     enable ? "start" : "stop", channel);
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+		    u16 beacon_interval, u8 dtim_interval)
+{
+	struct cmd_join *join;
+	int ret, i;
+	u8 *bssid;
+
+	join = kzalloc(sizeof(*join), GFP_KERNEL);
+	if (!join) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
+		     bss_type == BSS_TYPE_IBSS ? " ibss" : "",
+		     channel, beacon_interval, dtim_interval);
+
+	/* Reverse order BSSID */
+	bssid = (u8 *) &join->bssid_lsb;
+	for (i = 0; i < ETH_ALEN; i++)
+		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+	join->rx_config_options = wl->rx_config;
+	join->rx_filter_options = wl->rx_filter;
+
+	/*
+	 * FIXME: disable temporarily all filters because after commit
+	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
+	 * association. The filter logic needs to be implemented properly
+	 * and once that is done, this hack can be removed.
+	 */
+	join->rx_config_options = 0;
+	join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
+
+	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+	join->beacon_interval = beacon_interval;
+	join->dtim_interval = dtim_interval;
+	join->bss_type = bss_type;
+	join->channel = channel;
+	join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+	ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+	if (ret < 0) {
+		wl1251_error("failed to initiate cmd join");
+		goto out;
+	}
+
+out:
+	kfree(join);
+	return ret;
+}
+
+int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
+{
+	struct wl1251_cmd_ps_params *ps_params = NULL;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd set ps mode");
+
+	ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
+	if (!ps_params) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ps_params->ps_mode = ps_mode;
+	ps_params->send_null_data = 1;
+	ps_params->retries = 5;
+	ps_params->hang_over_period = 128;
+	ps_params->null_data_rate = 1; /* 1 Mbps */
+
+	ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
+			      sizeof(*ps_params));
+	if (ret < 0) {
+		wl1251_error("cmd set_ps_mode failed");
+		goto out;
+	}
+
+out:
+	kfree(ps_params);
+	return ret;
+}
+
+int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
+			   size_t len)
+{
+	struct cmd_read_write_memory *cmd;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd read memory");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	WARN_ON(len > MAX_READ_SIZE);
+	len = min_t(size_t, len, MAX_READ_SIZE);
+
+	cmd->addr = addr;
+	cmd->size = len;
+
+	ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("read memory command failed: %d", ret);
+		goto out;
+	}
+
+	/* the read command got in, we can now read the answer */
+	wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+	if (cmd->header.status != CMD_STATUS_SUCCESS)
+		wl1251_error("error in read command result: %d",
+			     cmd->header.status);
+
+	memcpy(answer, cmd->value, len);
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
+			    void *buf, size_t buf_len)
+{
+	struct wl1251_cmd_packet_template *cmd;
+	size_t cmd_len;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+	WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
+	buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
+	cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
+
+	cmd = kzalloc(cmd_len, GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->size = cpu_to_le16(buf_len);
+
+	if (buf)
+		memcpy(cmd->data, buf, buf_len);
+
+	ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
+	if (ret < 0) {
+		wl1251_warning("cmd set_template failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    struct ieee80211_channel *channels[],
+		    unsigned int n_channels, unsigned int n_probes)
+{
+	struct wl1251_cmd_scan *cmd;
+	int i, ret = 0;
+
+	wl1251_debug(DEBUG_CMD, "cmd scan");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+	cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
+						    CFG_RX_MGMT_EN |
+						    CFG_RX_BCN_EN);
+	cmd->params.scan_options = 0;
+	cmd->params.num_channels = n_channels;
+	cmd->params.num_probe_requests = n_probes;
+	cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+	cmd->params.tid_trigger = 0;
+
+	for (i = 0; i < n_channels; i++) {
+		cmd->channels[i].min_duration =
+			cpu_to_le32(WL1251_SCAN_MIN_DURATION);
+		cmd->channels[i].max_duration =
+			cpu_to_le32(WL1251_SCAN_MAX_DURATION);
+		memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
+		memset(&cmd->channels[i].bssid_msb, 0xff, 2);
+		cmd->channels[i].early_termination = 0;
+		cmd->channels[i].tx_power_att = 0;
+		cmd->channels[i].channel = channels[i]->hw_value;
+	}
+
+	cmd->params.ssid_len = ssid_len;
+	if (ssid)
+		memcpy(cmd->params.ssid, ssid, ssid_len);
+
+	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("cmd scan failed: %d", ret);
+		goto out;
+	}
+
+	wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+
+	if (cmd->header.status != CMD_STATUS_SUCCESS) {
+		wl1251_error("cmd scan status wasn't success: %d",
+			     cmd->header.status);
+		ret = -EIO;
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
+
+int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
+{
+	struct wl1251_cmd_trigger_scan_to *cmd;
+	int ret;
+
+	wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->timeout = timeout;
+
+	ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1251_error("cmd trigger scan to failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(cmd);
+	return ret;
+}
diff --git a/drivers/net/wireless/ti/wl1251/cmd.h b/drivers/net/wireless/ti/wl1251/cmd.h
new file mode 100644
index 0000000..ee4f2b3
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/cmd.h
@@ -0,0 +1,415 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_CMD_H__
+#define __WL1251_CMD_H__
+
+#include "wl1251.h"
+
+#include <net/cfg80211.h>
+
+struct acx_header;
+
+int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len);
+int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer);
+int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len);
+int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len);
+int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
+		   void *bitmap, u16 bitmap_len, u8 bitmap_control);
+int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable);
+int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+		    u16 beacon_interval, u8 dtim_interval);
+int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode);
+int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
+			   size_t len);
+int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
+			    void *buf, size_t buf_len);
+int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
+		    struct ieee80211_channel *channels[],
+		    unsigned int n_channels, unsigned int n_probes);
+int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout);
+
+/* unit ms */
+#define WL1251_COMMAND_TIMEOUT 2000
+
+enum wl1251_commands {
+	CMD_RESET           = 0,
+	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
+	CMD_CONFIGURE       = 2,    /*use this to write information elements*/
+	CMD_ENABLE_RX       = 3,
+	CMD_ENABLE_TX       = 4,
+	CMD_DISABLE_RX      = 5,
+	CMD_DISABLE_TX      = 6,
+	CMD_SCAN            = 8,
+	CMD_STOP_SCAN       = 9,
+	CMD_VBM             = 10,
+	CMD_START_JOIN      = 11,
+	CMD_SET_KEYS        = 12,
+	CMD_READ_MEMORY     = 13,
+	CMD_WRITE_MEMORY    = 14,
+	CMD_BEACON          = 19,
+	CMD_PROBE_RESP      = 20,
+	CMD_NULL_DATA       = 21,
+	CMD_PROBE_REQ       = 22,
+	CMD_TEST            = 23,
+	CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */
+	CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */
+	CMD_NOISE_HIST      = 28,
+	CMD_RX_RESET        = 29,
+	CMD_PS_POLL         = 30,
+	CMD_QOS_NULL_DATA   = 31,
+	CMD_LNA_CONTROL     = 32,
+	CMD_SET_BCN_MODE    = 33,
+	CMD_MEASUREMENT      = 34,
+	CMD_STOP_MEASUREMENT = 35,
+	CMD_DISCONNECT       = 36,
+	CMD_SET_PS_MODE      = 37,
+	CMD_CHANNEL_SWITCH   = 38,
+	CMD_STOP_CHANNEL_SWICTH = 39,
+	CMD_AP_DISCOVERY     = 40,
+	CMD_STOP_AP_DISCOVERY = 41,
+	CMD_SPS_SCAN = 42,
+	CMD_STOP_SPS_SCAN = 43,
+	CMD_HEALTH_CHECK     = 45,
+	CMD_DEBUG            = 46,
+	CMD_TRIGGER_SCAN_TO  = 47,
+
+	NUM_COMMANDS,
+	MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+struct wl1251_cmd_header {
+	u16 id;
+	u16 status;
+	/* payload */
+	u8 data[0];
+} __packed;
+
+struct  wl1251_command {
+	struct wl1251_cmd_header header;
+	u8  parameters[MAX_CMD_PARAMS];
+} __packed;
+
+enum {
+	CMD_MAILBOX_IDLE              		=  0,
+	CMD_STATUS_SUCCESS            		=  1,
+	CMD_STATUS_UNKNOWN_CMD        		=  2,
+	CMD_STATUS_UNKNOWN_IE         		=  3,
+	CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11,
+	CMD_STATUS_RX_BUSY            		= 13,
+	CMD_STATUS_INVALID_PARAM      		= 14,
+	CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15,
+	CMD_STATUS_OUT_OF_MEMORY      		= 16,
+	CMD_STATUS_STA_TABLE_FULL     		= 17,
+	CMD_STATUS_RADIO_ERROR        		= 18,
+	CMD_STATUS_WRONG_NESTING      		= 19,
+	CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/
+	CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/
+	MAX_COMMAND_STATUS            		= 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+	struct wl1251_cmd_header header;
+
+	/* The address of the memory to read from or write to.*/
+	u32 addr;
+
+	/* The amount of data in bytes to read from or write to the WiLink
+	 * device.*/
+	u32 size;
+
+	/* The actual value read from or written to the Wilink. The source
+	   of this field is the Host in WRITE command or the Wilink in READ
+	   command. */
+	u8 value[MAX_READ_SIZE];
+} __packed;
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+#define WL1251_SCAN_MIN_DURATION 30000
+#define WL1251_SCAN_MAX_DURATION 60000
+
+#define WL1251_SCAN_NUM_PROBES 3
+
+struct wl1251_scan_parameters {
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
+
+	/*
+	 * Scan options:
+	 * bit 0: When this bit is set, passive scan.
+	 * bit 1: Band, when this bit is set we scan
+	 * in the 5Ghz band.
+	 * bit 2: voice mode, 0 for normal scan.
+	 * bit 3: scan priority, 1 for high priority.
+	 */
+	__le16 scan_options;
+
+	/* Number of channels to scan */
+	u8 num_channels;
+
+	/* Number opf probe requests to send, per channel */
+	u8 num_probe_requests;
+
+	/* Rate and modulation for probe requests */
+	__le16 tx_rate;
+
+	u8 tid_trigger;
+	u8 ssid_len;
+	u8 ssid[32];
+
+} __packed;
+
+struct wl1251_scan_ch_parameters {
+	__le32 min_duration; /* in TU */
+	__le32 max_duration; /* in TU */
+	u32 bssid_lsb;
+	u16 bssid_msb;
+
+	/*
+	 * bits 0-3: Early termination count.
+	 * bits 4-5: Early termination condition.
+	 */
+	u8 early_termination;
+
+	u8 tx_power_att;
+	u8 channel;
+	u8 pad[3];
+} __packed;
+
+/* SCAN parameters */
+#define SCAN_MAX_NUM_OF_CHANNELS 16
+
+struct wl1251_cmd_scan {
+	struct wl1251_cmd_header header;
+
+	struct wl1251_scan_parameters params;
+	struct wl1251_scan_ch_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+} __packed;
+
+enum {
+	BSS_TYPE_IBSS = 0,
+	BSS_TYPE_STA_BSS = 2,
+	BSS_TYPE_AP_BSS = 3,
+	MAX_BSS_TYPE = 0xFF
+};
+
+#define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */
+#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */
+
+
+struct cmd_join {
+	struct wl1251_cmd_header header;
+
+	u32 bssid_lsb;
+	u16 bssid_msb;
+	u16 beacon_interval; /* in TBTTs */
+	u32 rx_config_options;
+	u32 rx_filter_options;
+
+	/*
+	 * The target uses this field to determine the rate at
+	 * which to transmit control frame responses (such as
+	 * ACK or CTS frames).
+	 */
+	u16 basic_rate_set;
+	u8 dtim_interval;
+	u8 tx_ctrl_frame_rate; /* OBSOLETE */
+	u8 tx_ctrl_frame_mod;  /* OBSOLETE */
+	/*
+	 * bits 0-2: This bitwise field specifies the type
+	 * of BSS to start or join (BSS_TYPE_*).
+	 * bit 4: Band - The radio band in which to join
+	 * or start.
+	 *  0 - 2.4GHz band
+	 *  1 - 5GHz band
+	 * bits 3, 5-7: Reserved
+	 */
+	u8 bss_type;
+	u8 channel;
+	u8 ssid_len;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ctrl; /* JOIN_CMD_CTRL_* */
+	u8 tx_mgt_frame_rate; /* OBSOLETE */
+	u8 tx_mgt_frame_mod;  /* OBSOLETE */
+	u8 reserved;
+} __packed;
+
+struct cmd_enabledisable_path {
+	struct wl1251_cmd_header header;
+
+	u8 channel;
+	u8 padding[3];
+} __packed;
+
+#define WL1251_MAX_TEMPLATE_SIZE 300
+
+struct wl1251_cmd_packet_template {
+	struct wl1251_cmd_header header;
+
+	__le16 size;
+	u8 data[0];
+} __packed;
+
+#define TIM_ELE_ID    5
+#define PARTIAL_VBM_MAX    251
+
+struct wl1251_tim {
+	u8 identity;
+	u8 length;
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __packed;
+
+/* Virtual Bit Map update */
+struct wl1251_cmd_vbm_update {
+	struct wl1251_cmd_header header;
+	__le16 len;
+	u8  padding[2];
+	struct wl1251_tim tim;
+} __packed;
+
+enum wl1251_cmd_ps_mode {
+	CHIP_ACTIVE_MODE,
+	CHIP_POWER_SAVE_MODE
+};
+
+struct wl1251_cmd_ps_params {
+	struct wl1251_cmd_header header;
+
+	u8 ps_mode; /* STATION_* */
+	u8 send_null_data; /* Do we have to send NULL data packet ? */
+	u8 retries; /* Number of retires for the initial NULL data packet */
+
+	 /*
+	  * TUs during which the target stays awake after switching
+	  * to power save mode.
+	  */
+	u8 hang_over_period;
+	u16 null_data_rate;
+	u8 pad[2];
+} __packed;
+
+struct wl1251_cmd_trigger_scan_to {
+	struct wl1251_cmd_header header;
+
+	u32 timeout;
+} __packed;
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE      0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE       0x80
+
+enum wl1251_cmd_key_action {
+	KEY_ADD_OR_REPLACE = 1,
+	KEY_REMOVE         = 2,
+	KEY_SET_ID         = 3,
+	MAX_KEY_ACTION     = 0xffff,
+};
+
+enum wl1251_cmd_key_type {
+	KEY_WEP_DEFAULT       = 0,
+	KEY_WEP_ADDR          = 1,
+	KEY_AES_GROUP         = 4,
+	KEY_AES_PAIRWISE      = 5,
+	KEY_WEP_GROUP         = 6,
+	KEY_TKIP_MIC_GROUP    = 10,
+	KEY_TKIP_MIC_PAIRWISE = 11,
+};
+
+/*
+ *
+ * key_type_e   key size    key format
+ * ----------   ---------   ----------
+ * 0x00         5, 13, 29   Key data
+ * 0x01         5, 13, 29   Key data
+ * 0x04         16          16 bytes of key data
+ * 0x05         16          16 bytes of key data
+ * 0x0a         32          16 bytes of TKIP key data
+ *                          8 bytes of RX MIC key data
+ *                          8 bytes of TX MIC key data
+ * 0x0b         32          16 bytes of TKIP key data
+ *                          8 bytes of RX MIC key data
+ *                          8 bytes of TX MIC key data
+ *
+ */
+
+struct wl1251_cmd_set_keys {
+	struct wl1251_cmd_header header;
+
+	/* Ignored for default WEP key */
+	u8 addr[ETH_ALEN];
+
+	/* key_action_e */
+	u16 key_action;
+
+	u16 reserved_1;
+
+	/* key size in bytes */
+	u8 key_size;
+
+	/* key_type_e */
+	u8 key_type;
+	u8 ssid_profile;
+
+	/*
+	 * TKIP, AES: frame's key id field.
+	 * For WEP default key: key id;
+	 */
+	u8 id;
+	u8 reserved_2[6];
+	u8 key[MAX_KEY_SIZE];
+	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __packed;
+
+
+#endif /* __WL1251_CMD_H__ */
diff --git a/drivers/net/wireless/ti/wl1251/debugfs.c b/drivers/net/wireless/ti/wl1251/debugfs.c
new file mode 100644
index 0000000..6c27400
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/debugfs.c
@@ -0,0 +1,545 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "debugfs.h"
+
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+
+#include "wl1251.h"
+#include "acx.h"
+#include "ps.h"
+
+/* ms */
+#define WL1251_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
+static ssize_t name## _read(struct file *file, char __user *userbuf,	\
+			    size_t count, loff_t *ppos)			\
+{									\
+	struct wl1251 *wl = file->private_data;				\
+	char buf[buflen];						\
+	int res;							\
+									\
+	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations name## _ops = {			\
+	.read = name## _read,						\
+	.open = wl1251_open_file_generic,				\
+	.llseek	= generic_file_llseek,					\
+};
+
+#define DEBUGFS_ADD(name, parent)					\
+	wl->debugfs.name = debugfs_create_file(#name, 0400, parent,	\
+					       wl, &name## _ops);	\
+	if (IS_ERR(wl->debugfs.name)) {					\
+		ret = PTR_ERR(wl->debugfs.name);			\
+		wl->debugfs.name = NULL;				\
+		goto out;						\
+	}
+
+#define DEBUGFS_DEL(name)						\
+	do {								\
+		debugfs_remove(wl->debugfs.name);			\
+		wl->debugfs.name = NULL;				\
+	} while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt)			\
+static ssize_t sub## _ ##name## _read(struct file *file,		\
+				      char __user *userbuf,		\
+				      size_t count, loff_t *ppos)	\
+{									\
+	struct wl1251 *wl = file->private_data;				\
+	char buf[buflen];						\
+	int res;							\
+									\
+	wl1251_debugfs_update_stats(wl);				\
+									\
+	res = scnprintf(buf, buflen, fmt "\n",				\
+			wl->stats.fw_stats->sub.name);			\
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+}									\
+									\
+static const struct file_operations sub## _ ##name## _ops = {		\
+	.read = sub## _ ##name## _read,					\
+	.open = wl1251_open_file_generic,				\
+	.llseek	= generic_file_llseek,					\
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name)				\
+	DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name)				\
+	DEBUGFS_DEL(sub## _ ##name)
+
+static void wl1251_debugfs_update_stats(struct wl1251 *wl)
+{
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	if (wl->state == WL1251_STATE_ON &&
+	    time_after(jiffies, wl->stats.fw_stats_update +
+		       msecs_to_jiffies(WL1251_DEBUGFS_STATS_LIFETIME))) {
+		wl1251_acx_statistics(wl, wl->stats.fw_stats);
+		wl->stats.fw_stats_update = jiffies;
+	}
+
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+		     20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+		      wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	struct wl1251 *wl = file->private_data;
+	u32 queue_len;
+	char buf[20];
+	int res;
+
+	queue_len = skb_queue_len(&wl->tx_queue);
+
+	res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+	.read = tx_queue_len_read,
+	.open = wl1251_open_file_generic,
+	.llseek = generic_file_llseek,
+};
+
+static ssize_t tx_queue_status_read(struct file *file, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1251 *wl = file->private_data;
+	char buf[3], status;
+	int len;
+
+	if (wl->tx_queue_stopped)
+		status = 's';
+	else
+		status = 'r';
+
+	len = scnprintf(buf, sizeof(buf), "%c\n", status);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations tx_queue_status_ops = {
+	.read = tx_queue_status_read,
+	.open = wl1251_open_file_generic,
+	.llseek = generic_file_llseek,
+};
+
+static void wl1251_debugfs_delete_files(struct wl1251 *wl)
+{
+	DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+	DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+	DEBUGFS_FWSTATS_DEL(rx, dropped);
+	DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+	DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_DEL(rx, path_reset);
+	DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+	DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+	DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+	DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_DEL(isr, fiqs);
+	DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+	DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+	DEBUGFS_FWSTATS_DEL(isr, irqs);
+	DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+	DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+	DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+	DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+	DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_DEL(isr, commands);
+	DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+	DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+	DEBUGFS_FWSTATS_DEL(isr, wakeups);
+	DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+	DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+	DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_DEL(wep, packets);
+	DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+	DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+	DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+	DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+	DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+	DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+	DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_DEL(event, heart_beat);
+	DEBUGFS_FWSTATS_DEL(event, calibration);
+	DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+	DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_DEL(event, rx_pool);
+	DEBUGFS_FWSTATS_DEL(event, oom_late);
+	DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_DEL(tx_queue_len);
+	DEBUGFS_DEL(tx_queue_status);
+	DEBUGFS_DEL(retry_count);
+	DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl1251_debugfs_add_files(struct wl1251 *wl)
+{
+	int ret = 0;
+
+	DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+	DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+	DEBUGFS_FWSTATS_ADD(rx, dropped);
+	DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+	DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_ADD(rx, path_reset);
+	DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+	DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_ADD(isr, fiqs);
+	DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+	DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+	DEBUGFS_FWSTATS_ADD(isr, irqs);
+	DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+	DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_ADD(isr, commands);
+	DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+	DEBUGFS_FWSTATS_ADD(isr, wakeups);
+	DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+	DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+	DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(wep, packets);
+	DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+	DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+	DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+	DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_ADD(event, heart_beat);
+	DEBUGFS_FWSTATS_ADD(event, calibration);
+	DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+	DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_ADD(event, rx_pool);
+	DEBUGFS_FWSTATS_ADD(event, oom_late);
+	DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+	DEBUGFS_ADD(tx_queue_status, wl->debugfs.rootdir);
+	DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+	DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+	if (ret < 0)
+		wl1251_debugfs_delete_files(wl);
+
+	return ret;
+}
+
+void wl1251_debugfs_reset(struct wl1251 *wl)
+{
+	if (wl->stats.fw_stats != NULL)
+		memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+	wl->stats.retry_count = 0;
+	wl->stats.excessive_retries = 0;
+}
+
+int wl1251_debugfs_init(struct wl1251 *wl)
+{
+	int ret;
+
+	wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+	if (IS_ERR(wl->debugfs.rootdir)) {
+		ret = PTR_ERR(wl->debugfs.rootdir);
+		wl->debugfs.rootdir = NULL;
+		goto err;
+	}
+
+	wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+						       wl->debugfs.rootdir);
+
+	if (IS_ERR(wl->debugfs.fw_statistics)) {
+		ret = PTR_ERR(wl->debugfs.fw_statistics);
+		wl->debugfs.fw_statistics = NULL;
+		goto err_root;
+	}
+
+	wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+				      GFP_KERNEL);
+
+	if (!wl->stats.fw_stats) {
+		ret = -ENOMEM;
+		goto err_fw;
+	}
+
+	wl->stats.fw_stats_update = jiffies;
+
+	ret = wl1251_debugfs_add_files(wl);
+
+	if (ret < 0)
+		goto err_file;
+
+	return 0;
+
+err_file:
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+err_fw:
+	debugfs_remove(wl->debugfs.fw_statistics);
+	wl->debugfs.fw_statistics = NULL;
+
+err_root:
+	debugfs_remove(wl->debugfs.rootdir);
+	wl->debugfs.rootdir = NULL;
+
+err:
+	return ret;
+}
+
+void wl1251_debugfs_exit(struct wl1251 *wl)
+{
+	wl1251_debugfs_delete_files(wl);
+
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+	debugfs_remove(wl->debugfs.fw_statistics);
+	wl->debugfs.fw_statistics = NULL;
+
+	debugfs_remove(wl->debugfs.rootdir);
+	wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/ti/wl1251/debugfs.h b/drivers/net/wireless/ti/wl1251/debugfs.h
new file mode 100644
index 0000000..b3417c0
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/debugfs.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL1251_DEBUGFS_H
+#define WL1251_DEBUGFS_H
+
+#include "wl1251.h"
+
+int wl1251_debugfs_init(struct wl1251 *wl);
+void wl1251_debugfs_exit(struct wl1251 *wl);
+void wl1251_debugfs_reset(struct wl1251 *wl);
+
+#endif /* WL1251_DEBUGFS_H */
diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c
new file mode 100644
index 0000000..9f15cca
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/event.c
@@ -0,0 +1,188 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "ps.h"
+
+static int wl1251_event_scan_complete(struct wl1251 *wl,
+				      struct event_mailbox *mbox)
+{
+	wl1251_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
+		     mbox->scheduled_scan_status,
+		     mbox->scheduled_scan_channels);
+
+	if (wl->scanning) {
+		ieee80211_scan_completed(wl->hw, false);
+		wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed");
+		wl->scanning = false;
+	}
+
+	return 0;
+}
+
+static void wl1251_event_mbox_dump(struct event_mailbox *mbox)
+{
+	wl1251_debug(DEBUG_EVENT, "MBOX DUMP:");
+	wl1251_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+	wl1251_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl1251_event_process(struct wl1251 *wl, struct event_mailbox *mbox)
+{
+	int ret;
+	u32 vector;
+
+	wl1251_event_mbox_dump(mbox);
+
+	vector = mbox->events_vector & ~(mbox->events_mask);
+	wl1251_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+	if (vector & SCAN_COMPLETE_EVENT_ID) {
+		ret = wl1251_event_scan_complete(wl, mbox);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (vector & BSS_LOSE_EVENT_ID) {
+		wl1251_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+		if (wl->psm_requested &&
+		    wl->station_mode != STATION_ACTIVE_MODE) {
+			ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
+	    wl->station_mode != STATION_ACTIVE_MODE) {
+		wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
+
+		/* indicate to the stack, that beacons have been lost */
+		ieee80211_beacon_loss(wl->vif);
+	}
+
+	if (vector & REGAINED_BSS_EVENT_ID) {
+		if (wl->psm_requested) {
+			ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	if (wl->vif && wl->rssi_thold) {
+		if (vector & ROAMING_TRIGGER_LOW_RSSI_EVENT_ID) {
+			wl1251_debug(DEBUG_EVENT,
+				     "ROAMING_TRIGGER_LOW_RSSI_EVENT");
+			ieee80211_cqm_rssi_notify(wl->vif,
+				NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+				GFP_KERNEL);
+		}
+
+		if (vector & ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID) {
+			wl1251_debug(DEBUG_EVENT,
+				     "ROAMING_TRIGGER_REGAINED_RSSI_EVENT");
+			ieee80211_cqm_rssi_notify(wl->vif,
+				NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+				GFP_KERNEL);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Poll the mailbox event field until any of the bits in the mask is set or a
+ * timeout occurs (WL1251_EVENT_TIMEOUT in msecs)
+ */
+int wl1251_event_wait(struct wl1251 *wl, u32 mask, int timeout_ms)
+{
+	u32 events_vector, event;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+	do {
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		msleep(1);
+
+		/* read from both event fields */
+		wl1251_mem_read(wl, wl->mbox_ptr[0], &events_vector,
+				sizeof(events_vector));
+		event = events_vector & mask;
+		wl1251_mem_read(wl, wl->mbox_ptr[1], &events_vector,
+				sizeof(events_vector));
+		event |= events_vector & mask;
+	} while (!event);
+
+	return 0;
+}
+
+int wl1251_event_unmask(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_event_mbox_mask(wl, ~(wl->event_mask));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+void wl1251_event_mbox_config(struct wl1251 *wl)
+{
+	wl->mbox_ptr[0] = wl1251_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+	wl1251_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl1251_event_handle(struct wl1251 *wl, u8 mbox_num)
+{
+	struct event_mailbox mbox;
+	int ret;
+
+	wl1251_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+	if (mbox_num > 1)
+		return -EINVAL;
+
+	/* first we read the mbox descriptor */
+	wl1251_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+			    sizeof(struct event_mailbox));
+
+	/* process the descriptor */
+	ret = wl1251_event_process(wl, &mbox);
+	if (ret < 0)
+		return ret;
+
+	/* then we let the firmware know it can go on...*/
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+	return 0;
+}
diff --git a/drivers/net/wireless/ti/wl1251/event.h b/drivers/net/wireless/ti/wl1251/event.h
new file mode 100644
index 0000000..30eb5d1
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/event.h
@@ -0,0 +1,120 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_EVENT_H__
+#define __WL1251_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+	RESERVED1_EVENT_ID                       = BIT(0),
+	RESERVED2_EVENT_ID                       = BIT(1),
+	MEASUREMENT_START_EVENT_ID               = BIT(2),
+	SCAN_COMPLETE_EVENT_ID                   = BIT(3),
+	CALIBRATION_COMPLETE_EVENT_ID            = BIT(4),
+	ROAMING_TRIGGER_LOW_RSSI_EVENT_ID        = BIT(5),
+	PS_REPORT_EVENT_ID                       = BIT(6),
+	SYNCHRONIZATION_TIMEOUT_EVENT_ID         = BIT(7),
+	HEALTH_REPORT_EVENT_ID                   = BIT(8),
+	ACI_DETECTION_EVENT_ID                   = BIT(9),
+	DEBUG_REPORT_EVENT_ID                    = BIT(10),
+	MAC_STATUS_EVENT_ID                      = BIT(11),
+	DISCONNECT_EVENT_COMPLETE_ID             = BIT(12),
+	JOIN_EVENT_COMPLETE_ID                   = BIT(13),
+	CHANNEL_SWITCH_COMPLETE_EVENT_ID         = BIT(14),
+	BSS_LOSE_EVENT_ID                        = BIT(15),
+	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID    = BIT(16),
+	MEASUREMENT_COMPLETE_EVENT_ID            = BIT(17),
+	AP_DISCOVERY_COMPLETE_EVENT_ID           = BIT(18),
+	SCHEDULED_SCAN_COMPLETE_EVENT_ID         = BIT(19),
+	PSPOLL_DELIVERY_FAILURE_EVENT_ID 	 = BIT(20),
+	RESET_BSS_EVENT_ID                       = BIT(21),
+	REGAINED_BSS_EVENT_ID                    = BIT(22),
+	ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID   = BIT(23),
+	ROAMING_TRIGGER_LOW_SNR_EVENT_ID         = BIT(24),
+	ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID    = BIT(25),
+
+	DBG_EVENT_ID                             = BIT(26),
+	BT_PTA_SENSE_EVENT_ID                    = BIT(27),
+	BT_PTA_PREDICTION_EVENT_ID               = BIT(28),
+	BT_PTA_AVALANCHE_EVENT_ID                = BIT(29),
+
+	PLT_RX_CALIBRATION_COMPLETE_EVENT_ID     = BIT(30),
+
+	EVENT_MBOX_ALL_EVENT_ID                  = 0x7fffffff,
+};
+
+struct event_debug_report {
+	u8 debug_event_id;
+	u8 num_params;
+	u16 pad;
+	u32 report_1;
+	u32 report_2;
+	u32 report_3;
+} __packed;
+
+struct event_mailbox {
+	u32 events_vector;
+	u32 events_mask;
+	u32 reserved_1;
+	u32 reserved_2;
+
+	char average_rssi_level;
+	u8 ps_status;
+	u8 channel_switch_status;
+	u8 scheduled_scan_status;
+
+	/* Channels scanned by the scheduled scan */
+	u16 scheduled_scan_channels;
+
+	/* If bit 0 is set -> target's fatal error */
+	u16 health_report;
+	u16 bad_fft_counter;
+	u8 bt_pta_sense_info;
+	u8 bt_pta_protective_info;
+	u32 reserved;
+	u32 debug_report[2];
+
+	/* Number of FCS errors since last event */
+	u32 fcs_err_counter;
+
+	struct event_debug_report report;
+	u8 average_snr_level;
+	u8 padding[19];
+} __packed;
+
+int wl1251_event_unmask(struct wl1251 *wl);
+void wl1251_event_mbox_config(struct wl1251 *wl);
+int wl1251_event_handle(struct wl1251 *wl, u8 mbox);
+int wl1251_event_wait(struct wl1251 *wl, u32 mask, int timeout_ms);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/init.c b/drivers/net/wireless/ti/wl1251/init.c
new file mode 100644
index 0000000..89b43d3
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/init.c
@@ -0,0 +1,423 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "init.h"
+#include "wl12xx_80211.h"
+#include "acx.h"
+#include "cmd.h"
+#include "reg.h"
+
+int wl1251_hw_init_hwenc_config(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_feature_cfg(wl);
+	if (ret < 0) {
+		wl1251_warning("couldn't set feature config");
+		return ret;
+	}
+
+	ret = wl1251_acx_default_key(wl, wl->default_key);
+	if (ret < 0) {
+		wl1251_warning("couldn't set default key");
+		return ret;
+	}
+
+	return 0;
+}
+
+int wl1251_hw_init_templates_config(struct wl1251 *wl)
+{
+	int ret;
+	u8 partial_vbm[PARTIAL_VBM_MAX];
+
+	/* send empty templates for fw memory reservation */
+	ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
+				      sizeof(struct wl12xx_probe_req_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA, NULL,
+				      sizeof(struct wl12xx_null_data_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_cmd_template_set(wl, CMD_PS_POLL, NULL,
+				      sizeof(struct wl12xx_ps_poll_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
+				      sizeof
+				      (struct wl12xx_qos_null_data_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
+				      sizeof
+				      (struct wl12xx_probe_resp_template));
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_cmd_template_set(wl, CMD_BEACON, NULL,
+				      sizeof
+				      (struct wl12xx_beacon_template));
+	if (ret < 0)
+		return ret;
+
+	/* tim templates, first reserve space then allocate an empty one */
+	memset(partial_vbm, 0, PARTIAL_VBM_MAX);
+	ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter)
+{
+	int ret;
+
+	ret = wl1251_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_rx_config(wl, config, filter);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_phy_config(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_pd_threshold(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_slot(wl, DEFAULT_SLOT_TIME);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_group_address_tbl(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_service_period_timeout(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_beacon_filter(struct wl1251 *wl)
+{
+	int ret;
+
+	/* disable beacon filtering at this stage */
+	ret = wl1251_acx_beacon_filter_opt(wl, false);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_beacon_filter_table(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_pta(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_sg_enable(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_acx_sg_cfg(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_energy_detection(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_cca_threshold(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_bcn_dtim_options(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int wl1251_hw_init_power_auth(struct wl1251 *wl)
+{
+	return wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM);
+}
+
+int wl1251_hw_init_mem_config(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_acx_mem_cfg(wl);
+	if (ret < 0)
+		return ret;
+
+	wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+					  GFP_KERNEL);
+	if (!wl->target_mem_map) {
+		wl1251_error("couldn't allocate target memory map");
+		return -ENOMEM;
+	}
+
+	/* we now ask for the firmware built memory map */
+	ret = wl1251_acx_mem_map(wl, wl->target_mem_map,
+				 sizeof(struct wl1251_acx_mem_map));
+	if (ret < 0) {
+		wl1251_error("couldn't retrieve firmware memory map");
+		kfree(wl->target_mem_map);
+		wl->target_mem_map = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+				   struct acx_tx_queue_qos_config *config,
+				   u32 num_blocks)
+{
+	config->qid = qid;
+
+	switch (qid) {
+	case QOS_AC_BE:
+		config->high_threshold =
+			(QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_BK:
+		config->high_threshold =
+			(QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_VI:
+		config->high_threshold =
+			(QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+		break;
+	case QOS_AC_VO:
+		config->high_threshold =
+			(QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+		config->low_threshold =
+			(QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+		break;
+	default:
+		wl1251_error("Invalid TX queue id: %d", qid);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl1251 *wl)
+{
+	struct acx_tx_queue_qos_config *config;
+	struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+	int ret, i;
+
+	wl1251_debug(DEBUG_ACX, "acx tx queue config");
+
+	config = kzalloc(sizeof(*config), GFP_KERNEL);
+	if (!config) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < MAX_NUM_OF_AC; i++) {
+		ret = wl1251_hw_init_txq_fill(i, config,
+					      wl_mem_map->num_tx_mem_blocks);
+		if (ret < 0)
+			goto out;
+
+		ret = wl1251_cmd_configure(wl, ACX_TX_QUEUE_CFG,
+					   config, sizeof(*config));
+		if (ret < 0)
+			goto out;
+	}
+
+	wl1251_acx_ac_cfg(wl, AC_BE, CWMIN_BE, CWMAX_BE, AIFS_DIFS, TXOP_BE);
+	wl1251_acx_ac_cfg(wl, AC_BK, CWMIN_BK, CWMAX_BK, AIFS_DIFS, TXOP_BK);
+	wl1251_acx_ac_cfg(wl, AC_VI, CWMIN_VI, CWMAX_VI, AIFS_DIFS, TXOP_VI);
+	wl1251_acx_ac_cfg(wl, AC_VO, CWMIN_VO, CWMAX_VO, AIFS_DIFS, TXOP_VO);
+
+out:
+	kfree(config);
+	return ret;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl1251 *wl)
+{
+	int ret;
+
+	/* asking for the data path parameters */
+	wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+				GFP_KERNEL);
+	if (!wl->data_path) {
+		wl1251_error("Couldnt allocate data path parameters");
+		return -ENOMEM;
+	}
+
+	ret = wl1251_acx_data_path_params(wl, wl->data_path);
+	if (ret < 0) {
+		kfree(wl->data_path);
+		wl->data_path = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
+
+int wl1251_hw_init(struct wl1251 *wl)
+{
+	struct wl1251_acx_mem_map *wl_mem_map;
+	int ret;
+
+	ret = wl1251_hw_init_hwenc_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Template settings */
+	ret = wl1251_hw_init_templates_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Default memory configuration */
+	ret = wl1251_hw_init_mem_config(wl);
+	if (ret < 0)
+		return ret;
+
+	/* Default data path configuration  */
+	ret = wl1251_hw_init_data_path_config(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* RX config */
+	ret = wl1251_hw_init_rx_config(wl,
+				       RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+				       RX_FILTER_OPTION_DEF);
+	/* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+	   RX_FILTER_OPTION_FILTER_ALL); */
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* TX queues config */
+	ret = wl1251_hw_init_tx_queue_config(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* PHY layer config */
+	ret = wl1251_hw_init_phy_config(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Initialize connection monitoring thresholds */
+	ret = wl1251_acx_conn_monit_params(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Beacon filtering */
+	ret = wl1251_hw_init_beacon_filter(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Bluetooth WLAN coexistence */
+	ret = wl1251_hw_init_pta(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Energy detection */
+	ret = wl1251_hw_init_energy_detection(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Beacons and boradcast settings */
+	ret = wl1251_hw_init_beacon_broadcast(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Enable data path */
+	ret = wl1251_cmd_data_path(wl, wl->channel, 1);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	/* Default power state */
+	ret = wl1251_hw_init_power_auth(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
+	wl_mem_map = wl->target_mem_map;
+	wl1251_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+		    wl_mem_map->num_tx_mem_blocks,
+		    wl->data_path->tx_control_addr,
+		    wl_mem_map->num_rx_mem_blocks,
+		    wl->data_path->rx_control_addr);
+
+	return 0;
+
+ out_free_data_path:
+	kfree(wl->data_path);
+
+ out_free_memmap:
+	kfree(wl->target_mem_map);
+
+	return ret;
+}
diff --git a/drivers/net/wireless/ti/wl1251/init.h b/drivers/net/wireless/ti/wl1251/init.h
new file mode 100644
index 0000000..543f175
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/init.h
@@ -0,0 +1,86 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_INIT_H__
+#define __WL1251_INIT_H__
+
+#include "wl1251.h"
+
+enum {
+	/* best effort/legacy */
+	AC_BE = 0,
+
+	/* background */
+	AC_BK = 1,
+
+	/* video */
+	AC_VI = 2,
+
+	/* voice */
+	AC_VO = 3,
+
+	/* broadcast dummy access category */
+	AC_BCAST = 4,
+
+	NUM_ACCESS_CATEGORIES = 4
+};
+
+/* following are defult values for the IE fields*/
+#define CWMIN_BK  15
+#define CWMIN_BE  15
+#define CWMIN_VI  7
+#define CWMIN_VO  3
+#define CWMAX_BK  1023
+#define CWMAX_BE  63
+#define CWMAX_VI  15
+#define CWMAX_VO  7
+
+/* slot number setting to start transmission at PIFS interval */
+#define AIFS_PIFS 1
+
+/*
+ * slot number setting to start transmission at DIFS interval - normal DCF
+ * access
+ */
+#define AIFS_DIFS 2
+
+#define AIFSN_BK  7
+#define AIFSN_BE  3
+#define AIFSN_VI  AIFS_PIFS
+#define AIFSN_VO  AIFS_PIFS
+#define TXOP_BK   0
+#define TXOP_BE   0
+#define TXOP_VI   3008
+#define TXOP_VO   1504
+
+int wl1251_hw_init_hwenc_config(struct wl1251 *wl);
+int wl1251_hw_init_templates_config(struct wl1251 *wl);
+int wl1251_hw_init_rx_config(struct wl1251 *wl, u32 config, u32 filter);
+int wl1251_hw_init_phy_config(struct wl1251 *wl);
+int wl1251_hw_init_beacon_filter(struct wl1251 *wl);
+int wl1251_hw_init_pta(struct wl1251 *wl);
+int wl1251_hw_init_energy_detection(struct wl1251 *wl);
+int wl1251_hw_init_beacon_broadcast(struct wl1251 *wl);
+int wl1251_hw_init_power_auth(struct wl1251 *wl);
+int wl1251_hw_init_mem_config(struct wl1251 *wl);
+int wl1251_hw_init(struct wl1251 *wl);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/io.c b/drivers/net/wireless/ti/wl1251/io.c
new file mode 100644
index 0000000..cdcadbf
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/io.c
@@ -0,0 +1,194 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1251.h"
+#include "reg.h"
+#include "io.h"
+
+/* FIXME: this is static data nowadays and the table can be removed */
+static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = {
+	[ACX_REG_INTERRUPT_TRIG]     = (REGISTERS_BASE + 0x0474),
+	[ACX_REG_INTERRUPT_TRIG_H]   = (REGISTERS_BASE + 0x0478),
+	[ACX_REG_INTERRUPT_MASK]     = (REGISTERS_BASE + 0x0494),
+	[ACX_REG_HINT_MASK_SET]      = (REGISTERS_BASE + 0x0498),
+	[ACX_REG_HINT_MASK_CLR]      = (REGISTERS_BASE + 0x049C),
+	[ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+	[ACX_REG_INTERRUPT_CLEAR]    = (REGISTERS_BASE + 0x04A4),
+	[ACX_REG_INTERRUPT_ACK]      = (REGISTERS_BASE + 0x04A8),
+	[ACX_REG_SLV_SOFT_RESET]     = (REGISTERS_BASE + 0x0000),
+	[ACX_REG_EE_START]           = (REGISTERS_BASE + 0x080C),
+	[ACX_REG_ECPU_CONTROL]       = (REGISTERS_BASE + 0x0804)
+};
+
+static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr)
+{
+	/* If the address is lower than REGISTERS_BASE, it means that this is
+	 * a chip-specific register address, so look it up in the registers
+	 * table */
+	if (addr < REGISTERS_BASE) {
+		/* Make sure we don't go over the table */
+		if (addr >= ACX_REG_TABLE_LEN) {
+			wl1251_error("address out of range (%d)", addr);
+			return -EINVAL;
+		}
+		addr = wl1251_io_reg_table[addr];
+	}
+
+	return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl1251_translate_mem_addr(struct wl1251 *wl, int addr)
+{
+	return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len)
+{
+	int physical;
+
+	physical = wl1251_translate_mem_addr(wl, addr);
+
+	wl->if_ops->read(wl, physical, buf, len);
+}
+
+void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len)
+{
+	int physical;
+
+	physical = wl1251_translate_mem_addr(wl, addr);
+
+	wl->if_ops->write(wl, physical, buf, len);
+}
+
+u32 wl1251_mem_read32(struct wl1251 *wl, int addr)
+{
+	return wl1251_read32(wl, wl1251_translate_mem_addr(wl, addr));
+}
+
+void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val)
+{
+	wl1251_write32(wl, wl1251_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl1251_reg_read32(struct wl1251 *wl, int addr)
+{
+	return wl1251_read32(wl, wl1251_translate_reg_addr(wl, addr));
+}
+
+void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val)
+{
+	wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val);
+}
+
+/* Set the partitions to access the chip addresses.
+ *
+ * There are two VIRTUAL partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory.  This function also makes other checks to
+ * ensure that the partitions are not overlapping.  In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ *                               PHYSICAL address
+ *                                     space
+ *
+ *                                    |    |
+ *                                 ...+----+--> mem_start
+ *          VIRTUAL address     ...   |    |
+ *               space       ...      |    | [PART_0]
+ *                        ...         |    |
+ * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
+ *               |    |         ...   |    |
+ *               |MEM |      ...      |    |
+ *               |    |   ...         |    |
+ *  part_size <--+----+...            |    | {unused area)
+ *               |    |   ...         |    |
+ *               |REG |      ...      |    |
+ *  part_size    |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg_start
+ *  reg_size              ...         |    |
+ *                           ...      |    | [PART_1]
+ *                              ...   |    |
+ *                                 ...+----+--> reg_start + reg_size
+ *                                    |    |
+ *
+ */
+void wl1251_set_partition(struct wl1251 *wl,
+			  u32 mem_start, u32 mem_size,
+			  u32 reg_start, u32 reg_size)
+{
+	struct wl1251_partition partition[2];
+
+	wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+		     mem_start, mem_size);
+	wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+		     reg_start, reg_size);
+
+	/* Make sure that the two partitions together don't exceed the
+	 * address range */
+	if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+		wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+			     " address range.  Truncating partition[0].");
+		mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+		wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	}
+
+	if ((mem_start < reg_start) &&
+	    ((mem_start + mem_size) > reg_start)) {
+		/* Guarantee that the memory partition doesn't overlap the
+		 * registers partition */
+		wl1251_debug(DEBUG_SPI, "End of partition[0] is "
+			     "overlapping partition[1].  Adjusted.");
+		mem_size = reg_start - mem_start;
+		wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	} else if ((reg_start < mem_start) &&
+		   ((reg_start + reg_size) > mem_start)) {
+		/* Guarantee that the register partition doesn't overlap the
+		 * memory partition */
+		wl1251_debug(DEBUG_SPI, "End of partition[1] is"
+			     " overlapping partition[0].  Adjusted.");
+		reg_size = mem_start - reg_start;
+		wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+			     mem_start, mem_size);
+		wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+			     reg_start, reg_size);
+	}
+
+	partition[0].start = mem_start;
+	partition[0].size  = mem_size;
+	partition[1].start = reg_start;
+	partition[1].size  = reg_size;
+
+	wl->physical_mem_addr = mem_start;
+	wl->physical_reg_addr = reg_start;
+
+	wl->virtual_mem_addr = 0;
+	wl->virtual_reg_addr = mem_size;
+
+	wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition,
+		sizeof(partition));
+}
diff --git a/drivers/net/wireless/ti/wl1251/io.h b/drivers/net/wireless/ti/wl1251/io.h
new file mode 100644
index 0000000..d382877
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/io.h
@@ -0,0 +1,83 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#ifndef __WL1251_IO_H__
+#define __WL1251_IO_H__
+
+#include "wl1251.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE		0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE             4
+
+#define HW_ACCESS_PRAM_MAX_RANGE		0x3c000
+
+static inline u32 wl1251_read32(struct wl1251 *wl, int addr)
+{
+	wl->if_ops->read(wl, addr, &wl->buffer_32, sizeof(wl->buffer_32));
+
+	return le32_to_cpu(wl->buffer_32);
+}
+
+static inline void wl1251_write32(struct wl1251 *wl, int addr, u32 val)
+{
+	wl->buffer_32 = cpu_to_le32(val);
+	wl->if_ops->write(wl, addr, &wl->buffer_32, sizeof(wl->buffer_32));
+}
+
+static inline u32 wl1251_read_elp(struct wl1251 *wl, int addr)
+{
+	u32 response;
+
+	if (wl->if_ops->read_elp)
+		wl->if_ops->read_elp(wl, addr, &response);
+	else
+		wl->if_ops->read(wl, addr, &response, sizeof(u32));
+
+	return response;
+}
+
+static inline void wl1251_write_elp(struct wl1251 *wl, int addr, u32 val)
+{
+	if (wl->if_ops->write_elp)
+		wl->if_ops->write_elp(wl, addr, val);
+	else
+		wl->if_ops->write(wl, addr, &val, sizeof(u32));
+}
+
+/* Memory target IO, address is translated to partition 0 */
+void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len);
+void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len);
+u32 wl1251_mem_read32(struct wl1251 *wl, int addr);
+void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val);
+/* Registers IO */
+u32 wl1251_reg_read32(struct wl1251 *wl, int addr);
+void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val);
+
+void wl1251_set_partition(struct wl1251 *wl,
+			  u32 part_start, u32 part_size,
+			  u32 reg_start,  u32 reg_size);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
new file mode 100644
index 0000000..41302c7
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -0,0 +1,1471 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include "wl1251.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "io.h"
+#include "cmd.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+#include "boot.h"
+
+void wl1251_enable_interrupts(struct wl1251 *wl)
+{
+	wl->if_ops->enable_irq(wl);
+}
+
+void wl1251_disable_interrupts(struct wl1251 *wl)
+{
+	wl->if_ops->disable_irq(wl);
+}
+
+static int wl1251_power_off(struct wl1251 *wl)
+{
+	return wl->if_ops->power(wl, false);
+}
+
+static int wl1251_power_on(struct wl1251 *wl)
+{
+	return wl->if_ops->power(wl, true);
+}
+
+static int wl1251_fetch_firmware(struct wl1251 *wl)
+{
+	const struct firmware *fw;
+	struct device *dev = wiphy_dev(wl->hw->wiphy);
+	int ret;
+
+	ret = request_firmware(&fw, WL1251_FW_NAME, dev);
+
+	if (ret < 0) {
+		wl1251_error("could not get firmware: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl1251_error("firmware size is not multiple of 32 bits: %zu",
+			     fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->fw_len = fw->size;
+	wl->fw = vmalloc(wl->fw_len);
+
+	if (!wl->fw) {
+		wl1251_error("could not allocate memory for the firmware");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->fw, fw->data, wl->fw_len);
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int wl1251_fetch_nvs(struct wl1251 *wl)
+{
+	const struct firmware *fw;
+	struct device *dev = wiphy_dev(wl->hw->wiphy);
+	int ret;
+
+	ret = request_firmware(&fw, WL1251_NVS_NAME, dev);
+
+	if (ret < 0) {
+		wl1251_error("could not get nvs file: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl1251_error("nvs size is not multiple of 32 bits: %zu",
+			     fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->nvs_len = fw->size;
+	wl->nvs = kmemdup(fw->data, wl->nvs_len, GFP_KERNEL);
+
+	if (!wl->nvs) {
+		wl1251_error("could not allocate memory for the nvs file");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static void wl1251_fw_wakeup(struct wl1251 *wl)
+{
+	u32 elp_reg;
+
+	elp_reg = ELPCTRL_WAKE_UP;
+	wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+	if (!(elp_reg & ELPCTRL_WLAN_READY))
+		wl1251_warning("WLAN not ready");
+}
+
+static int wl1251_chip_wakeup(struct wl1251 *wl)
+{
+	int ret;
+
+	ret = wl1251_power_on(wl);
+	if (ret < 0)
+		return ret;
+
+	msleep(WL1251_POWER_ON_SLEEP);
+	wl->if_ops->reset(wl);
+
+	/* We don't need a real memory partition here, because we only want
+	 * to use the registers at this point. */
+	wl1251_set_partition(wl,
+			     0x00000000,
+			     0x00000000,
+			     REGISTERS_BASE,
+			     REGISTERS_DOWN_SIZE);
+
+	/* ELP module wake up */
+	wl1251_fw_wakeup(wl);
+
+	/* whal_FwCtrl_BootSm() */
+
+	/* 0. read chip id from CHIP_ID */
+	wl->chip_id = wl1251_reg_read32(wl, CHIP_ID_B);
+
+	/* 1. check if chip id is valid */
+
+	switch (wl->chip_id) {
+	case CHIP_ID_1251_PG12:
+		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
+			     wl->chip_id);
+		break;
+	case CHIP_ID_1251_PG11:
+		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
+			     wl->chip_id);
+		break;
+	case CHIP_ID_1251_PG10:
+	default:
+		wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (wl->fw == NULL) {
+		ret = wl1251_fetch_firmware(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (wl->nvs == NULL && !wl->use_eeprom) {
+		/* No NVS from netlink, try to get it from the filesystem */
+		ret = wl1251_fetch_nvs(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	return ret;
+}
+
+#define WL1251_IRQ_LOOP_COUNT 10
+static void wl1251_irq_work(struct work_struct *work)
+{
+	u32 intr, ctr = WL1251_IRQ_LOOP_COUNT;
+	struct wl1251 *wl =
+		container_of(work, struct wl1251, irq_work);
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	wl1251_debug(DEBUG_IRQ, "IRQ work");
+
+	if (wl->state == WL1251_STATE_OFF)
+		goto out;
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+	do {
+		if (wl->data_path) {
+			wl->rx_counter = wl1251_mem_read32(
+				wl, wl->data_path->rx_control_addr);
+
+			/* We handle a frmware bug here */
+			switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+			case 0:
+				wl1251_debug(DEBUG_IRQ,
+					     "RX: FW and host in sync");
+				intr &= ~WL1251_ACX_INTR_RX0_DATA;
+				intr &= ~WL1251_ACX_INTR_RX1_DATA;
+				break;
+			case 1:
+				wl1251_debug(DEBUG_IRQ, "RX: FW +1");
+				intr |= WL1251_ACX_INTR_RX0_DATA;
+				intr &= ~WL1251_ACX_INTR_RX1_DATA;
+				break;
+			case 2:
+				wl1251_debug(DEBUG_IRQ, "RX: FW +2");
+				intr |= WL1251_ACX_INTR_RX0_DATA;
+				intr |= WL1251_ACX_INTR_RX1_DATA;
+				break;
+			default:
+				wl1251_warning(
+					"RX: FW and host out of sync: %d",
+					wl->rx_counter - wl->rx_handled);
+				break;
+			}
+
+			wl->rx_handled = wl->rx_counter;
+
+			wl1251_debug(DEBUG_IRQ, "RX counter: %d",
+				     wl->rx_counter);
+		}
+
+		intr &= wl->intr_mask;
+
+		if (intr == 0) {
+			wl1251_debug(DEBUG_IRQ, "INTR is 0");
+			goto out_sleep;
+		}
+
+		if (intr & WL1251_ACX_INTR_RX0_DATA) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+			wl1251_rx(wl);
+		}
+
+		if (intr & WL1251_ACX_INTR_RX1_DATA) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+			wl1251_rx(wl);
+		}
+
+		if (intr & WL1251_ACX_INTR_TX_RESULT) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+			wl1251_tx_complete(wl);
+		}
+
+		if (intr & WL1251_ACX_INTR_EVENT_A) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_A");
+			wl1251_event_handle(wl, 0);
+		}
+
+		if (intr & WL1251_ACX_INTR_EVENT_B) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_B");
+			wl1251_event_handle(wl, 1);
+		}
+
+		if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+			wl1251_debug(DEBUG_IRQ,
+				     "WL1251_ACX_INTR_INIT_COMPLETE");
+
+		if (--ctr == 0)
+			break;
+
+		intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	} while (intr);
+
+out_sleep:
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
+		       u16 beacon_interval, u8 dtim_period)
+{
+	int ret;
+
+	ret = wl1251_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+				     DEFAULT_HW_GEN_MODULATION_TYPE,
+				     wl->tx_mgmt_frm_rate,
+				     wl->tx_mgmt_frm_mod);
+	if (ret < 0)
+		goto out;
+
+
+	ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval,
+			      dtim_period);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100);
+	if (ret < 0)
+		wl1251_warning("join timeout");
+
+out:
+	return ret;
+}
+
+static void wl1251_filter_work(struct work_struct *work)
+{
+	struct wl1251 *wl =
+		container_of(work, struct wl1251, filter_work);
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1251_STATE_OFF)
+		goto out;
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
+			  wl->dtim_period);
+	if (ret < 0)
+		goto out_sleep;
+
+out_sleep:
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+static void wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct wl1251 *wl = hw->priv;
+	unsigned long flags;
+
+	skb_queue_tail(&wl->tx_queue, skb);
+
+	/*
+	 * The chip specific setup must run before the first TX packet -
+	 * before that, the tx_work will not be initialized!
+	 */
+
+	ieee80211_queue_work(wl->hw, &wl->tx_work);
+
+	/*
+	 * The workqueue is slow to process the tx_queue and we need stop
+	 * the queue here, otherwise the queue will get too long.
+	 */
+	if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_HIGH_WATERMARK) {
+		wl1251_debug(DEBUG_TX, "op_tx: tx_queue full, stop queues");
+
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		ieee80211_stop_queues(wl->hw);
+		wl->tx_queue_stopped = true;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+	}
+}
+
+static int wl1251_op_start(struct ieee80211_hw *hw)
+{
+	struct wl1251 *wl = hw->priv;
+	struct wiphy *wiphy = hw->wiphy;
+	int ret = 0;
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 start");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state != WL1251_STATE_OFF) {
+		wl1251_error("cannot start because not in off state: %d",
+			     wl->state);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = wl1251_chip_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_boot(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_hw_init(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_acx_station_id(wl);
+	if (ret < 0)
+		goto out;
+
+	wl->state = WL1251_STATE_ON;
+
+	wl1251_info("firmware booted (%s)", wl->fw_ver);
+
+	/* update hw/fw version info in wiphy struct */
+	wiphy->hw_version = wl->chip_id;
+	strncpy(wiphy->fw_version, wl->fw_ver, sizeof(wiphy->fw_version));
+
+out:
+	if (ret < 0)
+		wl1251_power_off(wl);
+
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static void wl1251_op_stop(struct ieee80211_hw *hw)
+{
+	struct wl1251 *wl = hw->priv;
+
+	wl1251_info("down");
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
+
+	mutex_lock(&wl->mutex);
+
+	WARN_ON(wl->state != WL1251_STATE_ON);
+
+	if (wl->scanning) {
+		ieee80211_scan_completed(wl->hw, true);
+		wl->scanning = false;
+	}
+
+	wl->state = WL1251_STATE_OFF;
+
+	wl1251_disable_interrupts(wl);
+
+	mutex_unlock(&wl->mutex);
+
+	cancel_work_sync(&wl->irq_work);
+	cancel_work_sync(&wl->tx_work);
+	cancel_work_sync(&wl->filter_work);
+
+	mutex_lock(&wl->mutex);
+
+	/* let's notify MAC80211 about the remaining pending TX frames */
+	wl1251_tx_flush(wl);
+	wl1251_power_off(wl);
+
+	memset(wl->bssid, 0, ETH_ALEN);
+	wl->listen_int = 1;
+	wl->bss_type = MAX_BSS_TYPE;
+
+	wl->data_in_count = 0;
+	wl->rx_counter = 0;
+	wl->rx_handled = 0;
+	wl->rx_current_buffer = 0;
+	wl->rx_last_id = 0;
+	wl->next_tx_complete = 0;
+	wl->elp = false;
+	wl->station_mode = STATION_ACTIVE_MODE;
+	wl->tx_queue_stopped = false;
+	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
+	wl->rssi_thold = 0;
+	wl->channel = WL1251_DEFAULT_CHANNEL;
+
+	wl1251_debugfs_reset(wl);
+
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_op_add_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif)
+{
+	struct wl1251 *wl = hw->priv;
+	int ret = 0;
+
+	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
+			     IEEE80211_VIF_SUPPORTS_CQM_RSSI;
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
+		     vif->type, vif->addr);
+
+	mutex_lock(&wl->mutex);
+	if (wl->vif) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	wl->vif = vif;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		wl->bss_type = BSS_TYPE_STA_BSS;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		wl->bss_type = BSS_TYPE_IBSS;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (memcmp(wl->mac_addr, vif->addr, ETH_ALEN)) {
+		memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
+		SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+		ret = wl1251_acx_station_id(wl);
+		if (ret < 0)
+			goto out;
+	}
+
+out:
+	mutex_unlock(&wl->mutex);
+	return ret;
+}
+
+static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif)
+{
+	struct wl1251 *wl = hw->priv;
+
+	mutex_lock(&wl->mutex);
+	wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
+	wl->vif = NULL;
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_build_qos_null_data(struct wl1251 *wl)
+{
+	struct ieee80211_qos_hdr template;
+
+	memset(&template, 0, sizeof(template));
+
+	memcpy(template.addr1, wl->bssid, ETH_ALEN);
+	memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
+	memcpy(template.addr3, wl->bssid, ETH_ALEN);
+
+	template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+					     IEEE80211_STYPE_QOS_NULLFUNC |
+					     IEEE80211_FCTL_TODS);
+
+	/* FIXME: not sure what priority to use here */
+	template.qos_ctrl = cpu_to_le16(0);
+
+	return wl1251_cmd_template_set(wl, CMD_QOS_NULL_DATA, &template,
+				       sizeof(template));
+}
+
+static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct wl1251 *wl = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	int channel, ret = 0;
+
+	channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+		     channel,
+		     conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+		     conf->power_level);
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	if (channel != wl->channel) {
+		wl->channel = channel;
+
+		ret = wl1251_join(wl, wl->bss_type, wl->channel,
+				  wl->beacon_int, wl->dtim_period);
+		if (ret < 0)
+			goto out_sleep;
+	}
+
+	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+		wl1251_debug(DEBUG_PSM, "psm enabled");
+
+		wl->psm_requested = true;
+
+		wl->dtim_period = conf->ps_dtim_period;
+
+		ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
+						  wl->dtim_period);
+
+		/*
+		 * mac80211 enables PSM only if we're already associated.
+		 */
+		ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+		if (ret < 0)
+			goto out_sleep;
+	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
+		   wl->psm_requested) {
+		wl1251_debug(DEBUG_PSM, "psm disabled");
+
+		wl->psm_requested = false;
+
+		if (wl->station_mode != STATION_ACTIVE_MODE) {
+			ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			if (ret < 0)
+				goto out_sleep;
+		}
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+		if (conf->flags & IEEE80211_CONF_IDLE) {
+			ret = wl1251_ps_set_mode(wl, STATION_IDLE);
+			if (ret < 0)
+				goto out_sleep;
+		} else {
+			ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+			if (ret < 0)
+				goto out_sleep;
+			ret = wl1251_join(wl, wl->bss_type, wl->channel,
+					  wl->beacon_int, wl->dtim_period);
+			if (ret < 0)
+				goto out_sleep;
+		}
+	}
+
+	if (conf->power_level != wl->power_level) {
+		ret = wl1251_acx_tx_power(wl, conf->power_level);
+		if (ret < 0)
+			goto out_sleep;
+
+		wl->power_level = conf->power_level;
+	}
+
+out_sleep:
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+#define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+				  FIF_ALLMULTI | \
+				  FIF_FCSFAIL | \
+				  FIF_BCN_PRBRESP_PROMISC | \
+				  FIF_CONTROL | \
+				  FIF_OTHER_BSS)
+
+static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
+				       unsigned int changed,
+				       unsigned int *total,u64 multicast)
+{
+	struct wl1251 *wl = hw->priv;
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+	*total &= WL1251_SUPPORTED_FILTERS;
+	changed &= WL1251_SUPPORTED_FILTERS;
+
+	if (changed == 0)
+		/* no filters which we support changed */
+		return;
+
+	/* FIXME: wl->rx_config and wl->rx_filter are not protected */
+
+	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
+
+	if (*total & FIF_PROMISC_IN_BSS) {
+		wl->rx_config |= CFG_BSSID_FILTER_EN;
+		wl->rx_config |= CFG_RX_ALL_GOOD;
+	}
+	if (*total & FIF_ALLMULTI)
+		/*
+		 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+		 * all multicast frames
+		 */
+		wl->rx_config &= ~CFG_MC_FILTER_EN;
+	if (*total & FIF_FCSFAIL)
+		wl->rx_filter |= CFG_RX_FCS_ERROR;
+	if (*total & FIF_BCN_PRBRESP_PROMISC) {
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+		wl->rx_config &= ~CFG_SSID_FILTER_EN;
+	}
+	if (*total & FIF_CONTROL)
+		wl->rx_filter |= CFG_RX_CTL_EN;
+	if (*total & FIF_OTHER_BSS)
+		wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+
+	/*
+	 * FIXME: workqueues need to be properly cancelled on stop(), for
+	 * now let's just disable changing the filter settings. They will
+	 * be updated any on config().
+	 */
+	/* schedule_work(&wl->filter_work); */
+}
+
+/* HW encryption */
+static int wl1251_set_key_type(struct wl1251 *wl,
+			       struct wl1251_cmd_set_keys *key,
+			       enum set_key_cmd cmd,
+			       struct ieee80211_key_conf *mac80211_key,
+			       const u8 *addr)
+{
+	switch (mac80211_key->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_WEP_DEFAULT;
+		else
+			key->key_type = KEY_WEP_ADDR;
+
+		mac80211_key->hw_key_idx = mac80211_key->keyidx;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_TKIP_MIC_GROUP;
+		else
+			key->key_type = KEY_TKIP_MIC_PAIRWISE;
+
+		mac80211_key->hw_key_idx = mac80211_key->keyidx;
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		if (is_broadcast_ether_addr(addr))
+			key->key_type = KEY_AES_GROUP;
+		else
+			key->key_type = KEY_AES_PAIRWISE;
+		mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		break;
+	default:
+		wl1251_error("Unknown key cipher 0x%x", mac80211_key->cipher);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_sta *sta,
+			     struct ieee80211_key_conf *key)
+{
+	struct wl1251 *wl = hw->priv;
+	struct wl1251_cmd_set_keys *wl_cmd;
+	const u8 *addr;
+	int ret;
+
+	static const u8 bcast_addr[ETH_ALEN] =
+		{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
+
+	wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
+	if (!wl_cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	addr = sta ? sta->addr : bcast_addr;
+
+	wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+	wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+	wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+		     key->cipher, key->keyidx, key->keylen, key->flags);
+	wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
+
+	if (is_zero_ether_addr(addr)) {
+		/* We dont support TX only encryption */
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out_unlock;
+
+	switch (cmd) {
+	case SET_KEY:
+		wl_cmd->key_action = KEY_ADD_OR_REPLACE;
+		break;
+	case DISABLE_KEY:
+		wl_cmd->key_action = KEY_REMOVE;
+		break;
+	default:
+		wl1251_error("Unsupported key cmd 0x%x", cmd);
+		break;
+	}
+
+	ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
+	if (ret < 0) {
+		wl1251_error("Set KEY type failed");
+		goto out_sleep;
+	}
+
+	if (wl_cmd->key_type != KEY_WEP_DEFAULT)
+		memcpy(wl_cmd->addr, addr, ETH_ALEN);
+
+	if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
+	    (wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
+		/*
+		 * We get the key in the following form:
+		 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+		 * but the target is expecting:
+		 * TKIP - RX MIC - TX MIC
+		 */
+		memcpy(wl_cmd->key, key->key, 16);
+		memcpy(wl_cmd->key + 16, key->key + 24, 8);
+		memcpy(wl_cmd->key + 24, key->key + 16, 8);
+
+	} else {
+		memcpy(wl_cmd->key, key->key, key->keylen);
+	}
+	wl_cmd->key_size = key->keylen;
+
+	wl_cmd->id = key->keyidx;
+	wl_cmd->ssid_profile = 0;
+
+	wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
+
+	ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
+	if (ret < 0) {
+		wl1251_warning("could not set keys");
+		goto out_sleep;
+	}
+
+out_sleep:
+	wl1251_ps_elp_sleep(wl);
+
+out_unlock:
+	mutex_unlock(&wl->mutex);
+
+out:
+	kfree(wl_cmd);
+
+	return ret;
+}
+
+static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct cfg80211_scan_request *req)
+{
+	struct wl1251 *wl = hw->priv;
+	struct sk_buff *skb;
+	size_t ssid_len = 0;
+	u8 *ssid = NULL;
+	int ret;
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+	if (req->n_ssids) {
+		ssid = req->ssids[0].ssid;
+		ssid_len = req->ssids[0].ssid_len;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->scanning) {
+		wl1251_debug(DEBUG_SCAN, "scan already in progress");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
+				     req->ie, req->ie_len);
+	if (!skb) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl1251_cmd_template_set(wl, CMD_PROBE_REQ, skb->data,
+				      skb->len);
+	dev_kfree_skb(skb);
+	if (ret < 0)
+		goto out_sleep;
+
+	ret = wl1251_cmd_trigger_scan_to(wl, 0);
+	if (ret < 0)
+		goto out_sleep;
+
+	wl->scanning = true;
+
+	ret = wl1251_cmd_scan(wl, ssid, ssid_len, req->channels,
+			      req->n_channels, WL1251_SCAN_NUM_PROBES);
+	if (ret < 0) {
+		wl->scanning = false;
+		goto out_sleep;
+	}
+
+out_sleep:
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct wl1251 *wl = hw->priv;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1251_acx_rts_threshold(wl, (u16) value);
+	if (ret < 0)
+		wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
+
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct ieee80211_bss_conf *bss_conf,
+				       u32 changed)
+{
+	struct wl1251 *wl = hw->priv;
+	struct sk_buff *beacon, *skb;
+	int ret;
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	if (changed & BSS_CHANGED_CQM) {
+		ret = wl1251_acx_low_rssi(wl, bss_conf->cqm_rssi_thold,
+					  WL1251_DEFAULT_LOW_RSSI_WEIGHT,
+					  WL1251_DEFAULT_LOW_RSSI_DEPTH,
+					  WL1251_ACX_LOW_RSSI_TYPE_EDGE);
+		if (ret < 0)
+			goto out;
+		wl->rssi_thold = bss_conf->cqm_rssi_thold;
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+		skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
+		if (!skb)
+			goto out_sleep;
+
+		ret = wl1251_cmd_template_set(wl, CMD_NULL_DATA,
+					      skb->data, skb->len);
+		dev_kfree_skb(skb);
+		if (ret < 0)
+			goto out_sleep;
+
+		ret = wl1251_build_qos_null_data(wl);
+		if (ret < 0)
+			goto out;
+
+		if (wl->bss_type != BSS_TYPE_IBSS) {
+			ret = wl1251_join(wl, wl->bss_type, wl->channel,
+					  wl->beacon_int, wl->dtim_period);
+			if (ret < 0)
+				goto out_sleep;
+		}
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			wl->beacon_int = bss_conf->beacon_int;
+
+			skb = ieee80211_pspoll_get(wl->hw, wl->vif);
+			if (!skb)
+				goto out_sleep;
+
+			ret = wl1251_cmd_template_set(wl, CMD_PS_POLL,
+						      skb->data,
+						      skb->len);
+			dev_kfree_skb(skb);
+			if (ret < 0)
+				goto out_sleep;
+
+			ret = wl1251_acx_aid(wl, bss_conf->aid);
+			if (ret < 0)
+				goto out_sleep;
+		} else {
+			/* use defaults when not associated */
+			wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
+			wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
+		}
+	}
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		if (bss_conf->use_short_slot)
+			ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
+		else
+			ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
+		if (ret < 0) {
+			wl1251_warning("Set slot time failed %d", ret);
+			goto out_sleep;
+		}
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		if (bss_conf->use_short_preamble)
+			wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+		else
+			wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		if (bss_conf->use_cts_prot)
+			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+		else
+			ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+		if (ret < 0) {
+			wl1251_warning("Set ctsprotect failed %d", ret);
+			goto out_sleep;
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		beacon = ieee80211_beacon_get(hw, vif);
+		if (!beacon)
+			goto out_sleep;
+
+		ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
+					      beacon->len);
+
+		if (ret < 0) {
+			dev_kfree_skb(beacon);
+			goto out_sleep;
+		}
+
+		ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
+					      beacon->len);
+
+		dev_kfree_skb(beacon);
+
+		if (ret < 0)
+			goto out_sleep;
+
+		ret = wl1251_join(wl, wl->bss_type, wl->beacon_int,
+				  wl->channel, wl->dtim_period);
+
+		if (ret < 0)
+			goto out_sleep;
+	}
+
+out_sleep:
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl1251_rates[] = {
+	{ .bitrate = 10,
+	  .hw_value = 0x1,
+	  .hw_value_short = 0x1, },
+	{ .bitrate = 20,
+	  .hw_value = 0x2,
+	  .hw_value_short = 0x2,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55,
+	  .hw_value = 0x4,
+	  .hw_value_short = 0x4,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110,
+	  .hw_value = 0x20,
+	  .hw_value_short = 0x20,
+	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60,
+	  .hw_value = 0x8,
+	  .hw_value_short = 0x8, },
+	{ .bitrate = 90,
+	  .hw_value = 0x10,
+	  .hw_value_short = 0x10, },
+	{ .bitrate = 120,
+	  .hw_value = 0x40,
+	  .hw_value_short = 0x40, },
+	{ .bitrate = 180,
+	  .hw_value = 0x80,
+	  .hw_value_short = 0x80, },
+	{ .bitrate = 240,
+	  .hw_value = 0x200,
+	  .hw_value_short = 0x200, },
+	{ .bitrate = 360,
+	 .hw_value = 0x400,
+	 .hw_value_short = 0x400, },
+	{ .bitrate = 480,
+	  .hw_value = 0x800,
+	  .hw_value_short = 0x800, },
+	{ .bitrate = 540,
+	  .hw_value = 0x1000,
+	  .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl1251_channels[] = {
+	{ .hw_value = 1, .center_freq = 2412},
+	{ .hw_value = 2, .center_freq = 2417},
+	{ .hw_value = 3, .center_freq = 2422},
+	{ .hw_value = 4, .center_freq = 2427},
+	{ .hw_value = 5, .center_freq = 2432},
+	{ .hw_value = 6, .center_freq = 2437},
+	{ .hw_value = 7, .center_freq = 2442},
+	{ .hw_value = 8, .center_freq = 2447},
+	{ .hw_value = 9, .center_freq = 2452},
+	{ .hw_value = 10, .center_freq = 2457},
+	{ .hw_value = 11, .center_freq = 2462},
+	{ .hw_value = 12, .center_freq = 2467},
+	{ .hw_value = 13, .center_freq = 2472},
+};
+
+static int wl1251_op_conf_tx(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif, u16 queue,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	enum wl1251_acx_ps_scheme ps_scheme;
+	struct wl1251 *wl = hw->priv;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	wl1251_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
+
+	ret = wl1251_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	/* mac80211 uses units of 32 usec */
+	ret = wl1251_acx_ac_cfg(wl, wl1251_tx_get_queue(queue),
+				params->cw_min, params->cw_max,
+				params->aifs, params->txop * 32);
+	if (ret < 0)
+		goto out_sleep;
+
+	if (params->uapsd)
+		ps_scheme = WL1251_ACX_PS_SCHEME_UPSD_TRIGGER;
+	else
+		ps_scheme = WL1251_ACX_PS_SCHEME_LEGACY;
+
+	ret = wl1251_acx_tid_cfg(wl, wl1251_tx_get_queue(queue),
+				 CHANNEL_TYPE_EDCF,
+				 wl1251_tx_get_queue(queue), ps_scheme,
+				 WL1251_ACX_ACK_POLICY_LEGACY);
+	if (ret < 0)
+		goto out_sleep;
+
+out_sleep:
+	wl1251_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static int wl1251_op_get_survey(struct ieee80211_hw *hw, int idx,
+				struct survey_info *survey)
+{
+	struct wl1251 *wl = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+ 
+	if (idx != 0)
+		return -ENOENT;
+ 
+	survey->channel = conf->channel;
+	survey->filled = SURVEY_INFO_NOISE_DBM;
+	survey->noise = wl->noise;
+ 
+	return 0;
+}
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl1251_band_2ghz = {
+	.channels = wl1251_channels,
+	.n_channels = ARRAY_SIZE(wl1251_channels),
+	.bitrates = wl1251_rates,
+	.n_bitrates = ARRAY_SIZE(wl1251_rates),
+};
+
+static const struct ieee80211_ops wl1251_ops = {
+	.start = wl1251_op_start,
+	.stop = wl1251_op_stop,
+	.add_interface = wl1251_op_add_interface,
+	.remove_interface = wl1251_op_remove_interface,
+	.config = wl1251_op_config,
+	.configure_filter = wl1251_op_configure_filter,
+	.tx = wl1251_op_tx,
+	.set_key = wl1251_op_set_key,
+	.hw_scan = wl1251_op_hw_scan,
+	.bss_info_changed = wl1251_op_bss_info_changed,
+	.set_rts_threshold = wl1251_op_set_rts_threshold,
+	.conf_tx = wl1251_op_conf_tx,
+	.get_survey = wl1251_op_get_survey,
+};
+
+static int wl1251_read_eeprom_byte(struct wl1251 *wl, off_t offset, u8 *data)
+{
+	unsigned long timeout;
+
+	wl1251_reg_write32(wl, EE_ADDR, offset);
+	wl1251_reg_write32(wl, EE_CTL, EE_CTL_READ);
+
+	/* EE_CTL_READ clears when data is ready */
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (1) {
+		if (!(wl1251_reg_read32(wl, EE_CTL) & EE_CTL_READ))
+			break;
+
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		msleep(1);
+	}
+
+	*data = wl1251_reg_read32(wl, EE_DATA);
+	return 0;
+}
+
+static int wl1251_read_eeprom(struct wl1251 *wl, off_t offset,
+			      u8 *data, size_t len)
+{
+	size_t i;
+	int ret;
+
+	wl1251_reg_write32(wl, EE_START, 0);
+
+	for (i = 0; i < len; i++) {
+		ret = wl1251_read_eeprom_byte(wl, offset + i, &data[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_read_eeprom_mac(struct wl1251 *wl)
+{
+	u8 mac[ETH_ALEN];
+	int i, ret;
+
+	wl1251_set_partition(wl, 0, 0, REGISTERS_BASE, REGISTERS_DOWN_SIZE);
+
+	ret = wl1251_read_eeprom(wl, 0x1c, mac, sizeof(mac));
+	if (ret < 0) {
+		wl1251_warning("failed to read MAC address from EEPROM");
+		return ret;
+	}
+
+	/* MAC is stored in reverse order */
+	for (i = 0; i < ETH_ALEN; i++)
+		wl->mac_addr[i] = mac[ETH_ALEN - i - 1];
+
+	return 0;
+}
+
+static int wl1251_register_hw(struct wl1251 *wl)
+{
+	int ret;
+
+	if (wl->mac80211_registered)
+		return 0;
+
+	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+	ret = ieee80211_register_hw(wl->hw);
+	if (ret < 0) {
+		wl1251_error("unable to register mac80211 hw: %d", ret);
+		return ret;
+	}
+
+	wl->mac80211_registered = true;
+
+	wl1251_notice("loaded");
+
+	return 0;
+}
+
+int wl1251_init_ieee80211(struct wl1251 *wl)
+{
+	int ret;
+
+	/* The tx descriptor buffer and the TKIP space */
+	wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+		+ WL1251_TKIP_IV_SPACE;
+
+	/* unit us */
+	/* FIXME: find a proper value */
+	wl->hw->channel_change_time = 10000;
+
+	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_SUPPORTS_PS |
+		IEEE80211_HW_SUPPORTS_UAPSD;
+
+	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+					 BIT(NL80211_IFTYPE_ADHOC);
+	wl->hw->wiphy->max_scan_ssids = 1;
+	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
+
+	wl->hw->queues = 4;
+
+	if (wl->use_eeprom)
+		wl1251_read_eeprom_mac(wl);
+
+	ret = wl1251_register_hw(wl);
+	if (ret)
+		goto out;
+
+	wl1251_debugfs_init(wl);
+	wl1251_notice("initialized");
+
+	ret = 0;
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wl1251_init_ieee80211);
+
+struct ieee80211_hw *wl1251_alloc_hw(void)
+{
+	struct ieee80211_hw *hw;
+	struct wl1251 *wl;
+	int i;
+	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
+	if (!hw) {
+		wl1251_error("could not alloc ieee80211_hw");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	wl = hw->priv;
+	memset(wl, 0, sizeof(*wl));
+
+	wl->hw = hw;
+
+	wl->data_in_count = 0;
+
+	skb_queue_head_init(&wl->tx_queue);
+
+	INIT_WORK(&wl->filter_work, wl1251_filter_work);
+	INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
+	wl->channel = WL1251_DEFAULT_CHANNEL;
+	wl->scanning = false;
+	wl->default_key = 0;
+	wl->listen_int = 1;
+	wl->rx_counter = 0;
+	wl->rx_handled = 0;
+	wl->rx_current_buffer = 0;
+	wl->rx_last_id = 0;
+	wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
+	wl->elp = false;
+	wl->station_mode = STATION_ACTIVE_MODE;
+	wl->psm_requested = false;
+	wl->tx_queue_stopped = false;
+	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
+	wl->rssi_thold = 0;
+	wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
+	wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
+	wl->vif = NULL;
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		wl->tx_frames[i] = NULL;
+
+	wl->next_tx_complete = 0;
+
+	INIT_WORK(&wl->irq_work, wl1251_irq_work);
+	INIT_WORK(&wl->tx_work, wl1251_tx_work);
+
+	/*
+	 * In case our MAC address is not correctly set,
+	 * we use a random but Nokia MAC.
+	 */
+	memcpy(wl->mac_addr, nokia_oui, 3);
+	get_random_bytes(wl->mac_addr + 3, 3);
+
+	wl->state = WL1251_STATE_OFF;
+	mutex_init(&wl->mutex);
+
+	wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
+	wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
+
+	wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
+	if (!wl->rx_descriptor) {
+		wl1251_error("could not allocate memory for rx descriptor");
+		ieee80211_free_hw(hw);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return hw;
+}
+EXPORT_SYMBOL_GPL(wl1251_alloc_hw);
+
+int wl1251_free_hw(struct wl1251 *wl)
+{
+	ieee80211_unregister_hw(wl->hw);
+
+	wl1251_debugfs_exit(wl);
+
+	kfree(wl->target_mem_map);
+	kfree(wl->data_path);
+	vfree(wl->fw);
+	wl->fw = NULL;
+	kfree(wl->nvs);
+	wl->nvs = NULL;
+
+	kfree(wl->rx_descriptor);
+	wl->rx_descriptor = NULL;
+
+	ieee80211_free_hw(wl->hw);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wl1251_free_hw);
+
+MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
+MODULE_FIRMWARE(WL1251_FW_NAME);
diff --git a/drivers/net/wireless/ti/wl1251/ps.c b/drivers/net/wireless/ti/wl1251/ps.c
new file mode 100644
index 0000000..db719f7
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/ps.c
@@ -0,0 +1,185 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "reg.h"
+#include "ps.h"
+#include "cmd.h"
+#include "io.h"
+
+/* in ms */
+#define WL1251_WAKEUP_TIMEOUT 100
+
+void wl1251_elp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct wl1251 *wl;
+
+	dwork = container_of(work, struct delayed_work, work);
+	wl = container_of(dwork, struct wl1251, elp_work);
+
+	wl1251_debug(DEBUG_PSM, "elp work");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->elp || wl->station_mode == STATION_ACTIVE_MODE)
+		goto out;
+
+	wl1251_debug(DEBUG_PSM, "chip to elp");
+	wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+	wl->elp = true;
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+#define ELP_ENTRY_DELAY  5
+
+/* Routines to toggle sleep mode while in ELP */
+void wl1251_ps_elp_sleep(struct wl1251 *wl)
+{
+	unsigned long delay;
+
+	if (wl->station_mode != STATION_ACTIVE_MODE) {
+		delay = msecs_to_jiffies(ELP_ENTRY_DELAY);
+		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, delay);
+	}
+}
+
+int wl1251_ps_elp_wakeup(struct wl1251 *wl)
+{
+	unsigned long timeout, start;
+	u32 elp_reg;
+
+	if (delayed_work_pending(&wl->elp_work))
+		cancel_delayed_work(&wl->elp_work);
+
+	if (!wl->elp)
+		return 0;
+
+	wl1251_debug(DEBUG_PSM, "waking up chip from elp");
+
+	start = jiffies;
+	timeout = jiffies + msecs_to_jiffies(WL1251_WAKEUP_TIMEOUT);
+
+	wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+	elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+	/*
+	 * FIXME: we should wait for irq from chip but, as a temporary
+	 * solution to simplify locking, let's poll instead
+	 */
+	while (!(elp_reg & ELPCTRL_WLAN_READY)) {
+		if (time_after(jiffies, timeout)) {
+			wl1251_error("elp wakeup timeout");
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+		elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+	}
+
+	wl1251_debug(DEBUG_PSM, "wakeup time: %u ms",
+		     jiffies_to_msecs(jiffies - start));
+
+	wl->elp = false;
+
+	return 0;
+}
+
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_station_mode mode)
+{
+	int ret;
+
+	switch (mode) {
+	case STATION_POWER_SAVE_MODE:
+		wl1251_debug(DEBUG_PSM, "entering psm");
+
+		/* enable beacon filtering */
+		ret = wl1251_acx_beacon_filter_opt(wl, true);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_acx_wake_up_conditions(wl,
+						    WAKE_UP_EVENT_DTIM_BITMAP,
+						    wl->listen_int);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_acx_bet_enable(wl, WL1251_ACX_BET_ENABLE,
+					    WL1251_DEFAULT_BET_CONSECUTIVE);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_cmd_ps_mode(wl, CHIP_POWER_SAVE_MODE);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_ELP);
+		if (ret < 0)
+			return ret;
+		break;
+	case STATION_IDLE:
+		wl1251_debug(DEBUG_PSM, "entering idle");
+
+		ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_ELP);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_cmd_template_set(wl, CMD_DISCONNECT, NULL, 0);
+		if (ret < 0)
+			return ret;
+		break;
+	case STATION_ACTIVE_MODE:
+	default:
+		wl1251_debug(DEBUG_PSM, "leaving psm");
+
+		ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_CAM);
+		if (ret < 0)
+			return ret;
+
+		/* disable BET */
+		ret = wl1251_acx_bet_enable(wl, WL1251_ACX_BET_DISABLE,
+					    WL1251_DEFAULT_BET_CONSECUTIVE);
+		if (ret < 0)
+			return ret;
+
+		/* disable beacon filtering */
+		ret = wl1251_acx_beacon_filter_opt(wl, false);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_acx_wake_up_conditions(wl,
+						    WAKE_UP_EVENT_DTIM_BITMAP,
+						    wl->listen_int);
+		if (ret < 0)
+			return ret;
+
+		ret = wl1251_cmd_ps_mode(wl, CHIP_ACTIVE_MODE);
+		if (ret < 0)
+			return ret;
+
+		break;
+	}
+	wl->station_mode = mode;
+
+	return ret;
+}
+
diff --git a/drivers/net/wireless/ti/wl1251/ps.h b/drivers/net/wireless/ti/wl1251/ps.h
new file mode 100644
index 0000000..75efad2
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/ps.h
@@ -0,0 +1,35 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_PS_H__
+#define __WL1251_PS_H__
+
+#include "wl1251.h"
+#include "acx.h"
+
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_station_mode mode);
+void wl1251_ps_elp_sleep(struct wl1251 *wl);
+int wl1251_ps_elp_wakeup(struct wl1251 *wl);
+void wl1251_elp_work(struct work_struct *work);
+
+
+#endif /* __WL1251_PS_H__ */
diff --git a/drivers/net/wireless/ti/wl1251/reg.h b/drivers/net/wireless/ti/wl1251/reg.h
new file mode 100644
index 0000000..a580901
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/reg.h
@@ -0,0 +1,655 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE      0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR         0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP             0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY  0x5
+#define ELPCTRL_SLEEP               0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY          0x2
+
+/* Device Configuration registers*/
+#define SOR_CFG                        (REGISTERS_BASE + 0x0800)
+#define ECPU_CTRL                      (REGISTERS_BASE + 0x0804)
+#define HI_CFG                         (REGISTERS_BASE + 0x0808)
+
+/* EEPROM registers */
+#define EE_START                       (REGISTERS_BASE + 0x080C)
+#define EE_CTL                         (REGISTERS_BASE + 0x2000)
+#define EE_DATA                        (REGISTERS_BASE + 0x2004)
+#define EE_ADDR                        (REGISTERS_BASE + 0x2008)
+
+#define EE_CTL_READ                   2
+
+#define CHIP_ID_B                      (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1251_PG10	           (0x7010101)
+#define CHIP_ID_1251_PG11	           (0x7020101)
+#define CHIP_ID_1251_PG12	           (0x7030101)
+
+#define ENABLE                         (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE                   (REGISTERS_BASE + 0x5804)
+#define ELP_CMD                        (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME                   (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME                   (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME                   (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT               (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0                       (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1                       (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2                       (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3                       (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4                       (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET                   (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR                   (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5                       (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET                   (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR                   (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6                       (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7                       (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8                       (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9                       (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1                       (REGISTERS_BASE + 0x0994)
+#define SPARE_A2                       (REGISTERS_BASE + 0x0998)
+#define SPARE_A3                       (REGISTERS_BASE + 0x099C)
+#define SPARE_A4                       (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5                       (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6                       (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7                       (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8                       (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1                       (REGISTERS_BASE + 0x5420)
+#define SPARE_B2                       (REGISTERS_BASE + 0x5424)
+#define SPARE_B3                       (REGISTERS_BASE + 0x5428)
+#define SPARE_B4                       (REGISTERS_BASE + 0x542C)
+#define SPARE_B5                       (REGISTERS_BASE + 0x5430)
+#define SPARE_B6                       (REGISTERS_BASE + 0x5434)
+#define SPARE_B7                       (REGISTERS_BASE + 0x5438)
+#define SPARE_B8                       (REGISTERS_BASE + 0x543C)
+
+enum wl12xx_acx_int_reg {
+	ACX_REG_INTERRUPT_TRIG,
+	ACX_REG_INTERRUPT_TRIG_H,
+
+/*=============================================
+  Host Interrupt Mask Register - 32bit (RW)
+  ------------------------------------------
+  Setting a bit in this register masks the
+  corresponding interrupt to the host.
+  0 - RX0		- Rx first dubble buffer Data Interrupt
+  1 - TXD		- Tx Data Interrupt
+  2 - TXXFR		- Tx Transfer Interrupt
+  3 - RX1		- Rx second dubble buffer Data Interrupt
+  4 - RXXFR		- Rx Transfer Interrupt
+  5 - EVENT_A	- Event Mailbox interrupt
+  6 - EVENT_B	- Event Mailbox interrupt
+  7 - WNONHST	- Wake On Host Interrupt
+  8 - TRACE_A	- Debug Trace interrupt
+  9 - TRACE_B	- Debug Trace interrupt
+ 10 - CDCMP		- Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP		- Initialization Complete Interrupt
+ 16 - SG SE		- Soft Gemini - Sense enable interrupt
+ 17 - SG SD		- Soft Gemini - Sense disable interrupt
+ 18 -			-
+ 19 -			-
+ 20 -			-
+ 21-			-
+ Default: 0x0001
+*==============================================*/
+	ACX_REG_INTERRUPT_MASK,
+
+/*=============================================
+  Host Interrupt Mask Set 16bit, (Write only)
+  ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+	ACX_REG_HINT_MASK_SET,
+
+/*=============================================
+  Host Interrupt Mask Clear 16bit,(Write only)
+  ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+	ACX_REG_HINT_MASK_CLR,
+
+/*=============================================
+  Host Interrupt Status Nondestructive Read
+  16bit,(Read only)
+  ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+	ACX_REG_INTERRUPT_NO_CLEAR,
+
+/*=============================================
+  Host Interrupt Status Clear on Read  Register
+  16bit,(Read only)
+  ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+	ACX_REG_INTERRUPT_CLEAR,
+
+/*=============================================
+  Host Interrupt Acknowledge Register
+  16bit,(Write only)
+  ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+	ACX_REG_INTERRUPT_ACK,
+
+/*===============================================
+   Host Software Reset - 32bit RW
+ ------------------------------------------
+    [31:1] Reserved
+    0  SOFT_RESET Soft Reset  - When this bit is set,
+    it holds the Wlan hardware in a soft reset state.
+    This reset disables all MAC and baseband processor
+    clocks except the CardBus/PCI interface clock.
+    It also initializes all MAC state machines except
+    the host interface. It does not reload the
+    contents of the EEPROM. When this bit is cleared
+    (not self-clearing), the Wlan hardware
+    exits the software reset state.
+===============================================*/
+	ACX_REG_SLV_SOFT_RESET,
+
+/*===============================================
+ EEPROM Burst Read Start  - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0  ACX_EE_START -  EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+	ACX_REG_EE_START,
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU   - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+	ACX_REG_ECPU_CONTROL,
+
+	ACX_REG_TABLE_LEN
+};
+
+#define ACX_SLV_SOFT_RESET_BIT   BIT(0)
+#define ACX_REG_EEPROM_START_BIT BIT(0)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+  Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR				(SCR_PAD0)
+
+/*===============================================
+  Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR				(SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX				(ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG				(RX_CFG)
+#define REG_RX_FILTER				(RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP	 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS		 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID			 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC			 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC	 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC	 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID	 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID		 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST		 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID	 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS		 0x2000
+#define RX_CFG_TSF			 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS	 (RX_CFG_ENABLE_ANY_DEST_MAC | \
+					  RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS	 (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+					  | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+					  RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS	 (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+					  | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN  (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+				    | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+				    | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN	 (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+					  RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN   (RX_CFG_ENABLE_ONLY_MY_SSID | \
+					  RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF	      (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+				       | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+				       | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL	 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN  (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+					| CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN	     (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+				      | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+				      | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+				      | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE  - EEPROM Write Request  - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define EE_CTL                              (REGISTERS_BASE + 0x2000)
+#define ACX_EE_CTL_REG                      EE_CTL
+#define EE_WRITE                            0x00000001ul
+#define EE_READ                             0x00000002ul
+
+/*===============================================
+  EEPROM Address  - 32bit RW
+  ------------------------------------------
+  This register specifies the address
+  within the EEPROM from/to which to read/write data.
+  ===============================================*/
+#define EE_ADDR                             (REGISTERS_BASE + 0x2008)
+#define ACX_EE_ADDR_REG                     EE_ADDR
+
+/*===============================================
+  EEPROM Data  - 32bit RW
+  ------------------------------------------
+  This register either holds the read 8 bits of
+  data from the EEPROM or the write data
+  to be written to the EEPROM.
+  ===============================================*/
+#define EE_DATA                             (REGISTERS_BASE + 0x2004)
+#define ACX_EE_DATA_REG                     EE_DATA
+
+#define EEPROM_ACCESS_TO                    10000   /* timeout counter */
+#define START_EEPROM_MGR                    0x00000001
+
+/*===============================================
+  EEPROM Base Address  - 32bit RW
+  ------------------------------------------
+  This register holds the upper nine bits
+  [23:15] of the 24-bit Wlan hardware memory
+  address for burst reads from EEPROM accesses.
+  The EEPROM provides the lower 15 bits of this address.
+  The MSB of the address from the EEPROM is ignored.
+  ===============================================*/
+#define ACX_EE_CFG                          EE_CFG
+
+/*===============================================
+  GPIO Output Values  -32bit, RW
+  ------------------------------------------
+  [31:16]  Reserved
+  [15: 0]  Specify the output values (at the output driver inputs) for
+  GPIO[15:0], respectively.
+  ===============================================*/
+#define ACX_GPIO_OUT_REG            GPIO_OUT
+#define ACX_MAX_GPIO_LINES          15
+
+/*===============================================
+  Contention window  -32bit, RW
+  ------------------------------------------
+  [31:26]  Reserved
+  [25:16]  Max (0x3ff)
+  [15:07]  Reserved
+  [06:00]  Current contention window value - default is 0x1F
+  ===============================================*/
+#define ACX_CONT_WIND_CFG_REG    CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK   0x0000007f
+#define ACX_CONT_WIND_MAX        0x03ff0000
+
+/*===============================================
+  HI_CFG Interface Configuration Register Values
+  ------------------------------------------
+  ===============================================*/
+#define HI_CFG_UART_ENABLE          0x00000004
+#define HI_CFG_RST232_ENABLE        0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT     0x00000010
+#define HI_CFG_HOST_INT_ENABLE      0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE  0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW  0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15  0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ *       for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2                       0
+#define REF_FREQ_26_0                       1
+#define REF_FREQ_38_4                       2
+#define REF_FREQ_40_0                       3
+#define REF_FREQ_33_6                       4
+#define REF_FREQ_NUM                        5
+
+#define LUT_PARAM_INTEGER_DIVIDER           0
+#define LUT_PARAM_FRACTIONAL_DIVIDER        1
+#define LUT_PARAM_ATTN_BB                   2
+#define LUT_PARAM_ALPHA_BB                  3
+#define LUT_PARAM_STOP_TIME_BB              4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER        5
+#define LUT_PARAM_NUM                       6
+
+#define ACX_EEPROMLESS_IND_REG              (SCR_PAD4)
+#define USE_EEPROM                          0
+#define SOFT_RESET_MAX_TIME                 1000000
+#define SOFT_RESET_STALL_TIME               1000
+#define NVS_DATA_BUNDARY_ALIGNMENT          4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE          512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT					0x00000101
+
+
+/******************************************************************************
+
+    CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+	RADIO_BAND_2_4GHZ = 0,  /* 2.4 Ghz band */
+	RADIO_BAND_5GHZ = 1,    /* 5 Ghz band */
+	RADIO_BAND_JAPAN_4_9_GHZ = 2,
+	DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+	INVALID_BAND = 0xFE,
+	MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+	NO_RATE      = 0,
+	RATE_1MBPS   = 0x0A,
+	RATE_2MBPS   = 0x14,
+	RATE_5_5MBPS = 0x37,
+	RATE_6MBPS   = 0x0B,
+	RATE_9MBPS   = 0x0F,
+	RATE_11MBPS  = 0x6E,
+	RATE_12MBPS  = 0x0A,
+	RATE_18MBPS  = 0x0E,
+	RATE_22MBPS  = 0xDC,
+	RATE_24MBPS  = 0x09,
+	RATE_36MBPS  = 0x0D,
+	RATE_48MBPS  = 0x08,
+	RATE_54MBPS  = 0x0C
+};
+
+enum {
+	RATE_INDEX_1MBPS   =  0,
+	RATE_INDEX_2MBPS   =  1,
+	RATE_INDEX_5_5MBPS =  2,
+	RATE_INDEX_6MBPS   =  3,
+	RATE_INDEX_9MBPS   =  4,
+	RATE_INDEX_11MBPS  =  5,
+	RATE_INDEX_12MBPS  =  6,
+	RATE_INDEX_18MBPS  =  7,
+	RATE_INDEX_22MBPS  =  8,
+	RATE_INDEX_24MBPS  =  9,
+	RATE_INDEX_36MBPS  =  10,
+	RATE_INDEX_48MBPS  =  11,
+	RATE_INDEX_54MBPS  =  12,
+	RATE_INDEX_MAX     =  RATE_INDEX_54MBPS,
+	MAX_RATE_INDEX,
+	INVALID_RATE_INDEX = MAX_RATE_INDEX,
+	RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+	RATE_MASK_1MBPS = 0x1,
+	RATE_MASK_2MBPS = 0x2,
+	RATE_MASK_5_5MBPS = 0x4,
+	RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT        BIT(6)
+#define PBCC_RATE_BIT        BIT(7)
+
+enum {
+	CCK_LONG = 0,
+	CCK_SHORT = SHORT_PREAMBLE_BIT,
+	PBCC_LONG = PBCC_RATE_BIT,
+	PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+	OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15   - Indicates Preamble type (1=SHORT, 0=LONG).
+	Notes:
+	Must be LONG (0) for 1Mbps rate.
+	Does not apply (set to 0) for RevG-OFDM rates.
+b14   - Indicates PBCC encoding (1=PBCC, 0=not).
+	Notes:
+	Does not apply (set to 0) for rates 1 and 2 Mbps.
+	Does not apply (set to 0) for RevG-OFDM rates.
+b13    - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+/*************************************************************************
+
+    Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD       BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/rx.c b/drivers/net/wireless/ti/wl1251/rx.c
new file mode 100644
index 0000000..6af3526
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/rx.c
@@ -0,0 +1,235 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <linux/gfp.h>
+#include <net/mac80211.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "io.h"
+#include "rx.h"
+#include "cmd.h"
+#include "acx.h"
+
+static void wl1251_rx_header(struct wl1251 *wl,
+			     struct wl1251_rx_descriptor *desc)
+{
+	u32 rx_packet_ring_addr;
+
+	rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
+	if (wl->rx_current_buffer)
+		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+	wl1251_mem_read(wl, rx_packet_ring_addr, desc, sizeof(*desc));
+}
+
+static void wl1251_rx_status(struct wl1251 *wl,
+			     struct wl1251_rx_descriptor *desc,
+			     struct ieee80211_rx_status *status,
+			     u8 beacon)
+{
+	u64 mactime;
+	int ret;
+
+	memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->mactime = desc->timestamp;
+
+	/*
+	 * The rx status timestamp is a 32 bits value while the TSF is a
+	 * 64 bits one.
+	 * For IBSS merging, TSF is mandatory, so we have to get it
+	 * somehow, so we ask for ACX_TSF_INFO.
+	 * That could be moved to the get_tsf() hook, but unfortunately,
+	 * this one must be atomic, while our SPI routines can sleep.
+	 */
+	if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
+		ret = wl1251_acx_tsf_info(wl, &mactime);
+		if (ret == 0)
+			status->mactime = mactime;
+	}
+
+	status->signal = desc->rssi;
+
+	/*
+	 * FIXME: guessing that snr needs to be divided by two, otherwise
+	 * the values don't make any sense
+	 */
+	wl->noise = desc->rssi - desc->snr / 2;
+
+	status->freq = ieee80211_channel_to_frequency(desc->channel,
+						      status->band);
+
+	status->flag |= RX_FLAG_MACTIME_MPDU;
+
+	if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+		if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
+			status->flag |= RX_FLAG_DECRYPTED;
+
+		if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
+			status->flag |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
+		status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	switch (desc->rate) {
+		/* skip 1 and 12 Mbps because they have same value 0x0a */
+	case RATE_2MBPS:
+		status->rate_idx = 1;
+		break;
+	case RATE_5_5MBPS:
+		status->rate_idx = 2;
+		break;
+	case RATE_11MBPS:
+		status->rate_idx = 3;
+		break;
+	case RATE_6MBPS:
+		status->rate_idx = 4;
+		break;
+	case RATE_9MBPS:
+		status->rate_idx = 5;
+		break;
+	case RATE_18MBPS:
+		status->rate_idx = 7;
+		break;
+	case RATE_24MBPS:
+		status->rate_idx = 8;
+		break;
+	case RATE_36MBPS:
+		status->rate_idx = 9;
+		break;
+	case RATE_48MBPS:
+		status->rate_idx = 10;
+		break;
+	case RATE_54MBPS:
+		status->rate_idx = 11;
+		break;
+	}
+
+	/* for 1 and 12 Mbps we have to check the modulation */
+	if (desc->rate == RATE_1MBPS) {
+		if (!(desc->mod_pre & OFDM_RATE_BIT))
+			/* CCK -> RATE_1MBPS */
+			status->rate_idx = 0;
+		else
+			/* OFDM -> RATE_12MBPS */
+			status->rate_idx = 6;
+	}
+
+	if (desc->mod_pre & SHORT_PREAMBLE_BIT)
+		status->flag |= RX_FLAG_SHORTPRE;
+}
+
+static void wl1251_rx_body(struct wl1251 *wl,
+			   struct wl1251_rx_descriptor *desc)
+{
+	struct sk_buff *skb;
+	struct ieee80211_rx_status status;
+	u8 *rx_buffer, beacon = 0;
+	u16 length, *fc;
+	u32 curr_id, last_id_inc, rx_packet_ring_addr;
+
+	length = WL1251_RX_ALIGN(desc->length  - PLCP_HEADER_LENGTH);
+	curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
+	last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
+
+	if (last_id_inc != curr_id) {
+		wl1251_warning("curr ID:%d, last ID inc:%d",
+			       curr_id, last_id_inc);
+		wl->rx_last_id = curr_id;
+	} else {
+		wl->rx_last_id = last_id_inc;
+	}
+
+	rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
+		sizeof(struct wl1251_rx_descriptor) + 20;
+	if (wl->rx_current_buffer)
+		rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+	skb = __dev_alloc_skb(length, GFP_KERNEL);
+	if (!skb) {
+		wl1251_error("Couldn't allocate RX frame");
+		return;
+	}
+
+	rx_buffer = skb_put(skb, length);
+	wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
+
+	/* The actual length doesn't include the target's alignment */
+	skb->len = desc->length  - PLCP_HEADER_LENGTH;
+
+	fc = (u16 *)skb->data;
+
+	if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+		beacon = 1;
+
+	wl1251_rx_status(wl, desc, &status, beacon);
+
+	wl1251_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+		     beacon ? "beacon" : "");
+
+	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+	ieee80211_rx_ni(wl->hw, skb);
+}
+
+static void wl1251_rx_ack(struct wl1251 *wl)
+{
+	u32 data, addr;
+
+	if (wl->rx_current_buffer) {
+		addr = ACX_REG_INTERRUPT_TRIG_H;
+		data = INTR_TRIG_RX_PROC1;
+	} else {
+		addr = ACX_REG_INTERRUPT_TRIG;
+		data = INTR_TRIG_RX_PROC0;
+	}
+
+	wl1251_reg_write32(wl, addr, data);
+
+	/* Toggle buffer ring */
+	wl->rx_current_buffer = !wl->rx_current_buffer;
+}
+
+
+void wl1251_rx(struct wl1251 *wl)
+{
+	struct wl1251_rx_descriptor *rx_desc;
+
+	if (wl->state != WL1251_STATE_ON)
+		return;
+
+	rx_desc = wl->rx_descriptor;
+
+	/* We first read the frame's header */
+	wl1251_rx_header(wl, rx_desc);
+
+	/* Now we can read the body */
+	wl1251_rx_body(wl, rx_desc);
+
+	/* Finally, we need to ACK the RX */
+	wl1251_rx_ack(wl);
+}
diff --git a/drivers/net/wireless/ti/wl1251/rx.h b/drivers/net/wireless/ti/wl1251/rx.h
new file mode 100644
index 0000000..4448f63
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/rx.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_RX_H__
+#define __WL1251_RX_H__
+
+#include <linux/bitops.h>
+
+#include "wl1251.h"
+
+/*
+ * RX PATH
+ *
+ * The Rx path uses a double buffer and an rx_contro structure, each located
+ * at a fixed address in the device memory. The host keeps track of which
+ * buffer is available and alternates between them on a per packet basis.
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet.
+ * The RX path goes like that:
+ * 1) The target generates an interrupt each time a new packet is received.
+ *   There are 2 RX interrupts, one for each buffer.
+ * 2) The host reads the received packet from one of the double buffers.
+ * 3) The host triggers a target interrupt.
+ * 4) The target prepares the next RX packet.
+ */
+
+#define WL1251_RX_MAX_RSSI -30
+#define WL1251_RX_MIN_RSSI -95
+
+#define WL1251_RX_ALIGN_TO 4
+#define WL1251_RX_ALIGN(len) (((len) + WL1251_RX_ALIGN_TO - 1) & \
+			     ~(WL1251_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT   BIT(0)
+#define OFDM_RATE_BIT        BIT(6)
+#define PBCC_RATE_BIT        BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define RX_DESC_VALID_FCS         0x0001
+#define RX_DESC_MATCH_RXADDR1     0x0002
+#define RX_DESC_MCAST             0x0004
+#define RX_DESC_STAINTIM          0x0008
+#define RX_DESC_VIRTUAL_BM        0x0010
+#define RX_DESC_BCAST             0x0020
+#define RX_DESC_MATCH_SSID        0x0040
+#define RX_DESC_MATCH_BSSID       0x0080
+#define RX_DESC_ENCRYPTION_MASK   0x0300
+#define RX_DESC_MEASURMENT        0x0400
+#define RX_DESC_SEQNUM_MASK       0x1800
+#define	RX_DESC_MIC_FAIL	  0x2000
+#define	RX_DESC_DECRYPT_FAIL	  0x4000
+
+struct wl1251_rx_descriptor {
+	u32 timestamp; /* In microseconds */
+	u16 length; /* Paylod length, including headers */
+	u16 flags;
+
+	/*
+	 * 0 - 802.11
+	 * 1 - 802.3
+	 * 2 - IP
+	 * 3 - Raw Codec
+	 */
+	u8 type;
+
+	/*
+	 * Received Rate:
+	 * 0x0A - 1MBPS
+	 * 0x14 - 2MBPS
+	 * 0x37 - 5_5MBPS
+	 * 0x0B - 6MBPS
+	 * 0x0F - 9MBPS
+	 * 0x6E - 11MBPS
+	 * 0x0A - 12MBPS
+	 * 0x0E - 18MBPS
+	 * 0xDC - 22MBPS
+	 * 0x09 - 24MBPS
+	 * 0x0D - 36MBPS
+	 * 0x08 - 48MBPS
+	 * 0x0C - 54MBPS
+	 */
+	u8 rate;
+
+	u8 mod_pre; /* Modulation and preamble */
+	u8 channel;
+
+	/*
+	 * 0 - 2.4 Ghz
+	 * 1 - 5 Ghz
+	 */
+	u8 band;
+
+	s8 rssi; /* in dB */
+	u8 rcpi; /* in dB */
+	u8 snr; /* in dB */
+} __packed;
+
+void wl1251_rx(struct wl1251 *wl);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
new file mode 100644
index 0000000..f786942
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -0,0 +1,374 @@
+/*
+ * wl12xx SDIO routines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * Copyright (C) 2005 Texas Instruments Incorporated
+ * Copyright (C) 2008 Google Inc
+ * Copyright (C) 2009 Bob Copeland (me@bobcopeland.com)
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/platform_device.h>
+#include <linux/wl12xx.h>
+#include <linux/irq.h>
+#include <linux/pm_runtime.h>
+
+#include "wl1251.h"
+
+#ifndef SDIO_VENDOR_ID_TI
+#define SDIO_VENDOR_ID_TI		0x104c
+#endif
+
+#ifndef SDIO_DEVICE_ID_TI_WL1251
+#define SDIO_DEVICE_ID_TI_WL1251	0x9066
+#endif
+
+struct wl1251_sdio {
+	struct sdio_func *func;
+	u32 elp_val;
+};
+
+static struct sdio_func *wl_to_func(struct wl1251 *wl)
+{
+	struct wl1251_sdio *wl_sdio = wl->if_priv;
+	return wl_sdio->func;
+}
+
+static void wl1251_sdio_interrupt(struct sdio_func *func)
+{
+	struct wl1251 *wl = sdio_get_drvdata(func);
+
+	wl1251_debug(DEBUG_IRQ, "IRQ");
+
+	/* FIXME should be synchronous for sdio */
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
+}
+
+static const struct sdio_device_id wl1251_devices[] = {
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1251) },
+	{}
+};
+MODULE_DEVICE_TABLE(sdio, wl1251_devices);
+
+
+static void wl1251_sdio_read(struct wl1251 *wl, int addr,
+			     void *buf, size_t len)
+{
+	int ret;
+	struct sdio_func *func = wl_to_func(wl);
+
+	sdio_claim_host(func);
+	ret = sdio_memcpy_fromio(func, buf, addr, len);
+	if (ret)
+		wl1251_error("sdio read failed (%d)", ret);
+	sdio_release_host(func);
+}
+
+static void wl1251_sdio_write(struct wl1251 *wl, int addr,
+			      void *buf, size_t len)
+{
+	int ret;
+	struct sdio_func *func = wl_to_func(wl);
+
+	sdio_claim_host(func);
+	ret = sdio_memcpy_toio(func, addr, buf, len);
+	if (ret)
+		wl1251_error("sdio write failed (%d)", ret);
+	sdio_release_host(func);
+}
+
+static void wl1251_sdio_read_elp(struct wl1251 *wl, int addr, u32 *val)
+{
+	int ret = 0;
+	struct wl1251_sdio *wl_sdio = wl->if_priv;
+	struct sdio_func *func = wl_sdio->func;
+
+	/*
+	 * The hardware only supports RAW (read after write) access for
+	 * reading, regular sdio_readb won't work here (it interprets
+	 * the unused bits of CMD52 as write data even if we send read
+	 * request).
+	 */
+	sdio_claim_host(func);
+	*val = sdio_writeb_readb(func, wl_sdio->elp_val, addr, &ret);
+	sdio_release_host(func);
+
+	if (ret)
+		wl1251_error("sdio_readb failed (%d)", ret);
+}
+
+static void wl1251_sdio_write_elp(struct wl1251 *wl, int addr, u32 val)
+{
+	int ret = 0;
+	struct wl1251_sdio *wl_sdio = wl->if_priv;
+	struct sdio_func *func = wl_sdio->func;
+
+	sdio_claim_host(func);
+	sdio_writeb(func, val, addr, &ret);
+	sdio_release_host(func);
+
+	if (ret)
+		wl1251_error("sdio_writeb failed (%d)", ret);
+	else
+		wl_sdio->elp_val = val;
+}
+
+static void wl1251_sdio_reset(struct wl1251 *wl)
+{
+}
+
+static void wl1251_sdio_enable_irq(struct wl1251 *wl)
+{
+	struct sdio_func *func = wl_to_func(wl);
+
+	sdio_claim_host(func);
+	sdio_claim_irq(func, wl1251_sdio_interrupt);
+	sdio_release_host(func);
+}
+
+static void wl1251_sdio_disable_irq(struct wl1251 *wl)
+{
+	struct sdio_func *func = wl_to_func(wl);
+
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_release_host(func);
+}
+
+/* Interrupts when using dedicated WLAN_IRQ pin */
+static irqreturn_t wl1251_line_irq(int irq, void *cookie)
+{
+	struct wl1251 *wl = cookie;
+
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void wl1251_enable_line_irq(struct wl1251 *wl)
+{
+	return enable_irq(wl->irq);
+}
+
+static void wl1251_disable_line_irq(struct wl1251 *wl)
+{
+	return disable_irq(wl->irq);
+}
+
+static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
+{
+	struct sdio_func *func = wl_to_func(wl);
+	int ret;
+
+	if (enable) {
+		/*
+		 * Power is controlled by runtime PM, but we still call board
+		 * callback in case it wants to do any additional setup,
+		 * for example enabling clock buffer for the module.
+		 */
+		if (wl->set_power)
+			wl->set_power(true);
+
+		ret = pm_runtime_get_sync(&func->dev);
+		if (ret < 0)
+			goto out;
+
+		sdio_claim_host(func);
+		sdio_enable_func(func);
+		sdio_release_host(func);
+	} else {
+		sdio_claim_host(func);
+		sdio_disable_func(func);
+		sdio_release_host(func);
+
+		ret = pm_runtime_put_sync(&func->dev);
+		if (ret < 0)
+			goto out;
+
+		if (wl->set_power)
+			wl->set_power(false);
+	}
+
+out:
+	return ret;
+}
+
+static struct wl1251_if_operations wl1251_sdio_ops = {
+	.read = wl1251_sdio_read,
+	.write = wl1251_sdio_write,
+	.write_elp = wl1251_sdio_write_elp,
+	.read_elp = wl1251_sdio_read_elp,
+	.reset = wl1251_sdio_reset,
+	.power = wl1251_sdio_set_power,
+};
+
+static int wl1251_sdio_probe(struct sdio_func *func,
+			     const struct sdio_device_id *id)
+{
+	int ret;
+	struct wl1251 *wl;
+	struct ieee80211_hw *hw;
+	struct wl1251_sdio *wl_sdio;
+	const struct wl12xx_platform_data *wl12xx_board_data;
+
+	hw = wl1251_alloc_hw();
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	wl = hw->priv;
+
+	wl_sdio = kzalloc(sizeof(*wl_sdio), GFP_KERNEL);
+	if (wl_sdio == NULL) {
+		ret = -ENOMEM;
+		goto out_free_hw;
+	}
+
+	sdio_claim_host(func);
+	ret = sdio_enable_func(func);
+	if (ret)
+		goto release;
+
+	sdio_set_block_size(func, 512);
+	sdio_release_host(func);
+
+	SET_IEEE80211_DEV(hw, &func->dev);
+	wl_sdio->func = func;
+	wl->if_priv = wl_sdio;
+	wl->if_ops = &wl1251_sdio_ops;
+
+	wl12xx_board_data = wl12xx_get_platform_data();
+	if (!IS_ERR(wl12xx_board_data)) {
+		wl->set_power = wl12xx_board_data->set_power;
+		wl->irq = wl12xx_board_data->irq;
+		wl->use_eeprom = wl12xx_board_data->use_eeprom;
+	}
+
+	if (wl->irq) {
+		ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
+		if (ret < 0) {
+			wl1251_error("request_irq() failed: %d", ret);
+			goto disable;
+		}
+
+		irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+		disable_irq(wl->irq);
+
+		wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
+		wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
+
+		wl1251_info("using dedicated interrupt line");
+	} else {
+		wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq;
+		wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq;
+
+		wl1251_info("using SDIO interrupt");
+	}
+
+	ret = wl1251_init_ieee80211(wl);
+	if (ret)
+		goto out_free_irq;
+
+	sdio_set_drvdata(func, wl);
+
+	/* Tell PM core that we don't need the card to be powered now */
+	pm_runtime_put_noidle(&func->dev);
+
+	return ret;
+
+out_free_irq:
+	if (wl->irq)
+		free_irq(wl->irq, wl);
+disable:
+	sdio_claim_host(func);
+	sdio_disable_func(func);
+release:
+	sdio_release_host(func);
+	kfree(wl_sdio);
+out_free_hw:
+	wl1251_free_hw(wl);
+	return ret;
+}
+
+static void __devexit wl1251_sdio_remove(struct sdio_func *func)
+{
+	struct wl1251 *wl = sdio_get_drvdata(func);
+	struct wl1251_sdio *wl_sdio = wl->if_priv;
+
+	/* Undo decrement done above in wl1251_probe */
+	pm_runtime_get_noresume(&func->dev);
+
+	if (wl->irq)
+		free_irq(wl->irq, wl);
+	kfree(wl_sdio);
+	wl1251_free_hw(wl);
+
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+}
+
+static int wl1251_suspend(struct device *dev)
+{
+	/*
+	 * Tell MMC/SDIO core it's OK to power down the card
+	 * (if it isn't already), but not to remove it completely.
+	 */
+	return 0;
+}
+
+static int wl1251_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops wl1251_sdio_pm_ops = {
+	.suspend        = wl1251_suspend,
+	.resume         = wl1251_resume,
+};
+
+static struct sdio_driver wl1251_sdio_driver = {
+	.name		= "wl1251_sdio",
+	.id_table	= wl1251_devices,
+	.probe		= wl1251_sdio_probe,
+	.remove		= __devexit_p(wl1251_sdio_remove),
+	.drv.pm		= &wl1251_sdio_pm_ops,
+};
+
+static int __init wl1251_sdio_init(void)
+{
+	int err;
+
+	err = sdio_register_driver(&wl1251_sdio_driver);
+	if (err)
+		wl1251_error("failed to register sdio driver: %d", err);
+	return err;
+}
+
+static void __exit wl1251_sdio_exit(void)
+{
+	sdio_unregister_driver(&wl1251_sdio_driver);
+	wl1251_notice("unloaded");
+}
+
+module_init(wl1251_sdio_init);
+module_exit(wl1251_sdio_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
new file mode 100644
index 0000000..6248c35
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -0,0 +1,355 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+#include <linux/wl12xx.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "spi.h"
+
+static irqreturn_t wl1251_irq(int irq, void *cookie)
+{
+	struct wl1251 *wl;
+
+	wl1251_debug(DEBUG_IRQ, "IRQ");
+
+	wl = cookie;
+
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static struct spi_device *wl_to_spi(struct wl1251 *wl)
+{
+	return wl->if_priv;
+}
+
+static void wl1251_spi_reset(struct wl1251 *wl)
+{
+	u8 *cmd;
+	struct spi_transfer t;
+	struct spi_message m;
+
+	cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+	if (!cmd) {
+		wl1251_error("could not allocate cmd for spi reset");
+		return;
+	}
+
+	memset(&t, 0, sizeof(t));
+	spi_message_init(&m);
+
+	memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+	t.tx_buf = cmd;
+	t.len = WSPI_INIT_CMD_LEN;
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl_to_spi(wl), &m);
+
+	wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+static void wl1251_spi_wake(struct wl1251 *wl)
+{
+	u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+	struct spi_transfer t;
+	struct spi_message m;
+
+	cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+	if (!cmd) {
+		wl1251_error("could not allocate cmd for spi init");
+		return;
+	}
+
+	memset(crc, 0, sizeof(crc));
+	memset(&t, 0, sizeof(t));
+	spi_message_init(&m);
+
+	/*
+	 * Set WSPI_INIT_COMMAND
+	 * the data is being send from the MSB to LSB
+	 */
+	cmd[2] = 0xff;
+	cmd[3] = 0xff;
+	cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+	cmd[0] = 0;
+	cmd[7] = 0;
+	cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+	cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+	if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+		cmd[5] |=  WSPI_INIT_CMD_DIS_FIXEDBUSY;
+	else
+		cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+	cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+		| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+	crc[0] = cmd[1];
+	crc[1] = cmd[0];
+	crc[2] = cmd[7];
+	crc[3] = cmd[6];
+	crc[4] = cmd[5];
+
+	cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+	cmd[4] |= WSPI_INIT_CMD_END;
+
+	t.tx_buf = cmd;
+	t.len = WSPI_INIT_CMD_LEN;
+	spi_message_add_tail(&t, &m);
+
+	spi_sync(wl_to_spi(wl), &m);
+
+	wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+static void wl1251_spi_reset_wake(struct wl1251 *wl)
+{
+	wl1251_spi_reset(wl);
+	wl1251_spi_wake(wl);
+}
+
+static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
+			    size_t len)
+{
+	struct spi_transfer t[3];
+	struct spi_message m;
+	u8 *busy_buf;
+	u32 *cmd;
+
+	cmd = &wl->buffer_cmd;
+	busy_buf = wl->buffer_busyword;
+
+	*cmd = 0;
+	*cmd |= WSPI_CMD_READ;
+	*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	*cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = cmd;
+	t[0].len = 4;
+	spi_message_add_tail(&t[0], &m);
+
+	/* Busy and non busy words read */
+	t[1].rx_buf = busy_buf;
+	t[1].len = WL1251_BUSY_WORD_LEN;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = buf;
+	t[2].len = len;
+	spi_message_add_tail(&t[2], &m);
+
+	spi_sync(wl_to_spi(wl), &m);
+
+	/* FIXME: check busy words */
+
+	wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
+	wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
+			     size_t len)
+{
+	struct spi_transfer t[2];
+	struct spi_message m;
+	u32 *cmd;
+
+	cmd = &wl->buffer_cmd;
+
+	*cmd = 0;
+	*cmd |= WSPI_CMD_WRITE;
+	*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+	*cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = cmd;
+	t[0].len = sizeof(*cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	spi_sync(wl_to_spi(wl), &m);
+
+	wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
+	wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+static void wl1251_spi_enable_irq(struct wl1251 *wl)
+{
+	return enable_irq(wl->irq);
+}
+
+static void wl1251_spi_disable_irq(struct wl1251 *wl)
+{
+	return disable_irq(wl->irq);
+}
+
+static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
+{
+	if (wl->set_power)
+		wl->set_power(enable);
+
+	return 0;
+}
+
+static const struct wl1251_if_operations wl1251_spi_ops = {
+	.read = wl1251_spi_read,
+	.write = wl1251_spi_write,
+	.reset = wl1251_spi_reset_wake,
+	.enable_irq = wl1251_spi_enable_irq,
+	.disable_irq = wl1251_spi_disable_irq,
+	.power = wl1251_spi_set_power,
+};
+
+static int __devinit wl1251_spi_probe(struct spi_device *spi)
+{
+	struct wl12xx_platform_data *pdata;
+	struct ieee80211_hw *hw;
+	struct wl1251 *wl;
+	int ret;
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		wl1251_error("no platform data");
+		return -ENODEV;
+	}
+
+	hw = wl1251_alloc_hw();
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	wl = hw->priv;
+
+	SET_IEEE80211_DEV(hw, &spi->dev);
+	dev_set_drvdata(&spi->dev, wl);
+	wl->if_priv = spi;
+	wl->if_ops = &wl1251_spi_ops;
+
+	/* This is the only SPI value that we need to set here, the rest
+	 * comes from the board-peripherals file */
+	spi->bits_per_word = 32;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		wl1251_error("spi_setup failed");
+		goto out_free;
+	}
+
+	wl->set_power = pdata->set_power;
+	if (!wl->set_power) {
+		wl1251_error("set power function missing in platform data");
+		return -ENODEV;
+	}
+
+	wl->irq = spi->irq;
+	if (wl->irq < 0) {
+		wl1251_error("irq missing in platform data");
+		return -ENODEV;
+	}
+
+	wl->use_eeprom = pdata->use_eeprom;
+
+	ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
+	if (ret < 0) {
+		wl1251_error("request_irq() failed: %d", ret);
+		goto out_free;
+	}
+
+	irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(wl->irq);
+
+	ret = wl1251_init_ieee80211(wl);
+	if (ret)
+		goto out_irq;
+
+	return 0;
+
+ out_irq:
+	free_irq(wl->irq, wl);
+
+ out_free:
+	ieee80211_free_hw(hw);
+
+	return ret;
+}
+
+static int __devexit wl1251_spi_remove(struct spi_device *spi)
+{
+	struct wl1251 *wl = dev_get_drvdata(&spi->dev);
+
+	free_irq(wl->irq, wl);
+	wl1251_free_hw(wl);
+
+	return 0;
+}
+
+static struct spi_driver wl1251_spi_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= wl1251_spi_probe,
+	.remove		= __devexit_p(wl1251_spi_remove),
+};
+
+static int __init wl1251_spi_init(void)
+{
+	int ret;
+
+	ret = spi_register_driver(&wl1251_spi_driver);
+	if (ret < 0) {
+		wl1251_error("failed to register spi driver: %d", ret);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit wl1251_spi_exit(void)
+{
+	spi_unregister_driver(&wl1251_spi_driver);
+
+	wl1251_notice("unloaded");
+}
+
+module_init(wl1251_spi_init);
+module_exit(wl1251_spi_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
+MODULE_ALIAS("spi:wl1251");
diff --git a/drivers/net/wireless/ti/wl1251/spi.h b/drivers/net/wireless/ti/wl1251/spi.h
new file mode 100644
index 0000000..16d5069
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/spi.h
@@ -0,0 +1,59 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_SPI_H__
+#define __WL1251_SPI_H__
+
+#include "cmd.h"
+#include "acx.h"
+#include "reg.h"
+
+#define WSPI_CMD_READ                 0x40000000
+#define WSPI_CMD_WRITE                0x00000000
+#define WSPI_CMD_FIXED                0x20000000
+#define WSPI_CMD_BYTE_LENGTH          0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET   17
+#define WSPI_CMD_BYTE_ADDR            0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN       5
+
+#define WSPI_INIT_CMD_START         0x00
+#define WSPI_INIT_CMD_TX            0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT    0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY  0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD           0x40
+#define WSPI_INIT_CMD_IP            0x20
+#define WSPI_INIT_CMD_CS            0x10
+#define WSPI_INIT_CMD_WS            0x08
+#define WSPI_INIT_CMD_WSPI          0x01
+#define WSPI_INIT_CMD_END           0x01
+
+#define WSPI_INIT_CMD_LEN           8
+
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+		((WL1251_BUSY_WORD_LEN - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK  0
+
+#endif /* __WL1251_SPI_H__ */
diff --git a/drivers/net/wireless/ti/wl1251/tx.c b/drivers/net/wireless/ti/wl1251/tx.c
new file mode 100644
index 0000000..28121c5
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/tx.c
@@ -0,0 +1,560 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "tx.h"
+#include "ps.h"
+#include "io.h"
+
+static bool wl1251_tx_double_buffer_busy(struct wl1251 *wl, u32 data_out_count)
+{
+	int used, data_in_count;
+
+	data_in_count = wl->data_in_count;
+
+	if (data_in_count < data_out_count)
+		/* data_in_count has wrapped */
+		data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+	used = data_in_count - data_out_count;
+
+	WARN_ON(used < 0);
+	WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+	if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+		return true;
+	else
+		return false;
+}
+
+static int wl1251_tx_path_status(struct wl1251 *wl)
+{
+	u32 status, addr, data_out_count;
+	bool busy;
+
+	addr = wl->data_path->tx_control_addr;
+	status = wl1251_mem_read32(wl, addr);
+	data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+	busy = wl1251_tx_double_buffer_busy(wl, data_out_count);
+
+	if (busy)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int wl1251_tx_id(struct wl1251 *wl, struct sk_buff *skb)
+{
+	int i;
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		if (wl->tx_frames[i] == NULL) {
+			wl->tx_frames[i] = skb;
+			return i;
+		}
+
+	return -EBUSY;
+}
+
+static void wl1251_tx_control(struct tx_double_buffer_desc *tx_hdr,
+			      struct ieee80211_tx_info *control, u16 fc)
+{
+	*(u16 *)&tx_hdr->control = 0;
+
+	tx_hdr->control.rate_policy = 0;
+
+	/* 802.11 packets */
+	tx_hdr->control.packet_type = 0;
+
+	if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+		tx_hdr->control.ack_policy = 1;
+
+	tx_hdr->control.tx_complete = 1;
+
+	if ((fc & IEEE80211_FTYPE_DATA) &&
+	    ((fc & IEEE80211_STYPE_QOS_DATA) ||
+	     (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+		tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH      16
+#define MAX_MPDU_SECURITY_LENGTH      16
+#define WLAN_QOS_HDR_LEN              26
+#define MAX_MPDU_HEADER_AND_SECURITY  (MAX_MPDU_SECURITY_LENGTH + \
+				       WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE                 252
+static void wl1251_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+	u16 payload_len, frag_threshold, mem_blocks;
+	u16 num_mpdus, mem_blocks_per_frag;
+
+	frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+	tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+	payload_len = le16_to_cpu(tx_hdr->length) + MAX_MSDU_SECURITY_LENGTH;
+
+	if (payload_len > frag_threshold) {
+		mem_blocks_per_frag =
+			((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+			 HW_BLOCK_SIZE) + 1;
+		num_mpdus = payload_len / frag_threshold;
+		mem_blocks = num_mpdus * mem_blocks_per_frag;
+		payload_len -= num_mpdus * frag_threshold;
+		num_mpdus++;
+
+	} else {
+		mem_blocks_per_frag = 0;
+		mem_blocks = 0;
+		num_mpdus = 1;
+	}
+
+	mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+	if (num_mpdus > 1)
+		mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+	tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl1251_tx_fill_hdr(struct wl1251 *wl, struct sk_buff *skb,
+			      struct ieee80211_tx_info *control)
+{
+	struct tx_double_buffer_desc *tx_hdr;
+	struct ieee80211_rate *rate;
+	int id;
+	u16 fc;
+
+	if (!skb)
+		return -EINVAL;
+
+	id = wl1251_tx_id(wl, skb);
+	if (id < 0)
+		return id;
+
+	fc = *(u16 *)skb->data;
+	tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+							   sizeof(*tx_hdr));
+
+	tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+	rate = ieee80211_get_tx_rate(wl->hw, control);
+	tx_hdr->rate = cpu_to_le16(rate->hw_value);
+	tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+	tx_hdr->id = id;
+
+	tx_hdr->xmit_queue = wl1251_tx_get_queue(skb_get_queue_mapping(skb));
+
+	wl1251_tx_control(tx_hdr, control, fc);
+	wl1251_tx_frag_block_num(tx_hdr);
+
+	return 0;
+}
+
+/* We copy the packet to the target */
+static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb,
+				 struct ieee80211_tx_info *control)
+{
+	struct tx_double_buffer_desc *tx_hdr;
+	int len;
+	u32 addr;
+
+	if (!skb)
+		return -EINVAL;
+
+	tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+	if (control->control.hw_key &&
+	    control->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
+		int hdrlen;
+		__le16 fc;
+		u16 length;
+		u8 *pos;
+
+		fc = *(__le16 *)(skb->data + sizeof(*tx_hdr));
+		length = le16_to_cpu(tx_hdr->length) + WL1251_TKIP_IV_SPACE;
+		tx_hdr->length = cpu_to_le16(length);
+
+		hdrlen = ieee80211_hdrlen(fc);
+
+		pos = skb_push(skb, WL1251_TKIP_IV_SPACE);
+		memmove(pos, pos + WL1251_TKIP_IV_SPACE,
+			sizeof(*tx_hdr) + hdrlen);
+	}
+
+	/* Revisit. This is a workaround for getting non-aligned packets.
+	   This happens at least with EAPOL packets from the user space.
+	   Our DMA requires packets to be aligned on a 4-byte boundary.
+	*/
+	if (unlikely((long)skb->data & 0x03)) {
+		int offset = (4 - (long)skb->data) & 0x03;
+		wl1251_debug(DEBUG_TX, "skb offset %d", offset);
+
+		/* check whether the current skb can be used */
+		if (skb_cloned(skb) || (skb_tailroom(skb) < offset)) {
+			struct sk_buff *newskb = skb_copy_expand(skb, 0, 3,
+								 GFP_KERNEL);
+
+			if (unlikely(newskb == NULL)) {
+				wl1251_error("Can't allocate skb!");
+				return -EINVAL;
+			}
+
+			tx_hdr = (struct tx_double_buffer_desc *) newskb->data;
+
+			dev_kfree_skb_any(skb);
+			wl->tx_frames[tx_hdr->id] = skb = newskb;
+
+			offset = (4 - (long)skb->data) & 0x03;
+			wl1251_debug(DEBUG_TX, "new skb offset %d", offset);
+		}
+
+		/* align the buffer on a 4-byte boundary */
+		if (offset) {
+			unsigned char *src = skb->data;
+			skb_reserve(skb, offset);
+			memmove(skb->data, src, skb->len);
+			tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+		}
+	}
+
+	/* Our skb->data at this point includes the HW header */
+	len = WL1251_TX_ALIGN(skb->len);
+
+	if (wl->data_in_count & 0x1)
+		addr = wl->data_path->tx_packet_ring_addr +
+			wl->data_path->tx_packet_ring_chunk_size;
+	else
+		addr = wl->data_path->tx_packet_ring_addr;
+
+	wl1251_mem_write(wl, addr, skb->data, len);
+
+	wl1251_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x "
+		     "queue %d", tx_hdr->id, skb, tx_hdr->length,
+		     tx_hdr->rate, tx_hdr->xmit_queue);
+
+	return 0;
+}
+
+static void wl1251_tx_trigger(struct wl1251 *wl)
+{
+	u32 data, addr;
+
+	if (wl->data_in_count & 0x1) {
+		addr = ACX_REG_INTERRUPT_TRIG_H;
+		data = INTR_TRIG_TX_PROC1;
+	} else {
+		addr = ACX_REG_INTERRUPT_TRIG;
+		data = INTR_TRIG_TX_PROC0;
+	}
+
+	wl1251_reg_write32(wl, addr, data);
+
+	/* Bumping data in */
+	wl->data_in_count = (wl->data_in_count + 1) &
+		TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl1251_tx_frame(struct wl1251 *wl, struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info;
+	int ret = 0;
+	u8 idx;
+
+	info = IEEE80211_SKB_CB(skb);
+
+	if (info->control.hw_key) {
+		idx = info->control.hw_key->hw_key_idx;
+		if (unlikely(wl->default_key != idx)) {
+			ret = wl1251_acx_default_key(wl, idx);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	ret = wl1251_tx_path_status(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_tx_fill_hdr(wl, skb, info);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1251_tx_send_packet(wl, skb, info);
+	if (ret < 0)
+		return ret;
+
+	wl1251_tx_trigger(wl);
+
+	return ret;
+}
+
+void wl1251_tx_work(struct work_struct *work)
+{
+	struct wl1251 *wl = container_of(work, struct wl1251, tx_work);
+	struct sk_buff *skb;
+	bool woken_up = false;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL1251_STATE_OFF))
+		goto out;
+
+	while ((skb = skb_dequeue(&wl->tx_queue))) {
+		if (!woken_up) {
+			ret = wl1251_ps_elp_wakeup(wl);
+			if (ret < 0)
+				goto out;
+			woken_up = true;
+		}
+
+		ret = wl1251_tx_frame(wl, skb);
+		if (ret == -EBUSY) {
+			skb_queue_head(&wl->tx_queue, skb);
+			goto out;
+		} else if (ret < 0) {
+			dev_kfree_skb(skb);
+			goto out;
+		}
+	}
+
+out:
+	if (woken_up)
+		wl1251_ps_elp_sleep(wl);
+
+	mutex_unlock(&wl->mutex);
+}
+
+static const char *wl1251_tx_parse_status(u8 status)
+{
+	/* 8 bit status field, one character per bit plus null */
+	static char buf[9];
+	int i = 0;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (status & TX_DMA_ERROR)
+		buf[i++] = 'm';
+	if (status & TX_DISABLED)
+		buf[i++] = 'd';
+	if (status & TX_RETRY_EXCEEDED)
+		buf[i++] = 'r';
+	if (status & TX_TIMEOUT)
+		buf[i++] = 't';
+	if (status & TX_KEY_NOT_FOUND)
+		buf[i++] = 'k';
+	if (status & TX_ENCRYPT_FAIL)
+		buf[i++] = 'e';
+	if (status & TX_UNAVAILABLE_PRIORITY)
+		buf[i++] = 'p';
+
+	/* bit 0 is unused apparently */
+
+	return buf;
+}
+
+static void wl1251_tx_packet_cb(struct wl1251 *wl,
+				struct tx_result *result)
+{
+	struct ieee80211_tx_info *info;
+	struct sk_buff *skb;
+	int hdrlen;
+	u8 *frame;
+
+	skb = wl->tx_frames[result->id];
+	if (skb == NULL) {
+		wl1251_error("SKB for packet %d is NULL", result->id);
+		return;
+	}
+
+	info = IEEE80211_SKB_CB(skb);
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+	    (result->status == TX_SUCCESS))
+		info->flags |= IEEE80211_TX_STAT_ACK;
+
+	info->status.rates[0].count = result->ack_failures + 1;
+	wl->stats.retry_count += result->ack_failures;
+
+	/*
+	 * We have to remove our private TX header before pushing
+	 * the skb back to mac80211.
+	 */
+	frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+	if (info->control.hw_key &&
+	    info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
+		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+		memmove(frame + WL1251_TKIP_IV_SPACE, frame, hdrlen);
+		skb_pull(skb, WL1251_TKIP_IV_SPACE);
+	}
+
+	wl1251_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+		     " status 0x%x (%s)",
+		     result->id, skb, result->ack_failures, result->rate,
+		     result->status, wl1251_tx_parse_status(result->status));
+
+
+	ieee80211_tx_status(wl->hw, skb);
+
+	wl->tx_frames[result->id] = NULL;
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl1251_tx_complete(struct wl1251 *wl)
+{
+	int i, result_index, num_complete = 0, queue_len;
+	struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+	unsigned long flags;
+
+	if (unlikely(wl->state != WL1251_STATE_ON))
+		return;
+
+	/* First we read the result */
+	wl1251_mem_read(wl, wl->data_path->tx_complete_addr,
+			    result, sizeof(result));
+
+	result_index = wl->next_tx_complete;
+
+	for (i = 0; i < ARRAY_SIZE(result); i++) {
+		result_ptr = &result[result_index];
+
+		if (result_ptr->done_1 == 1 &&
+		    result_ptr->done_2 == 1) {
+			wl1251_tx_packet_cb(wl, result_ptr);
+
+			result_ptr->done_1 = 0;
+			result_ptr->done_2 = 0;
+
+			result_index = (result_index + 1) &
+				(FW_TX_CMPLT_BLOCK_SIZE - 1);
+			num_complete++;
+		} else {
+			break;
+		}
+	}
+
+	queue_len = skb_queue_len(&wl->tx_queue);
+
+	if ((num_complete > 0) && (queue_len > 0)) {
+		/* firmware buffer has space, reschedule tx_work */
+		wl1251_debug(DEBUG_TX, "tx_complete: reschedule tx_work");
+		ieee80211_queue_work(wl->hw, &wl->tx_work);
+	}
+
+	if (wl->tx_queue_stopped &&
+	    queue_len <= WL1251_TX_QUEUE_LOW_WATERMARK) {
+		/* tx_queue has space, restart queues */
+		wl1251_debug(DEBUG_TX, "tx_complete: waking queues");
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		ieee80211_wake_queues(wl->hw);
+		wl->tx_queue_stopped = false;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+	}
+
+	/* Every completed frame needs to be acknowledged */
+	if (num_complete) {
+		/*
+		 * If we've wrapped, we have to clear
+		 * the results in 2 steps.
+		 */
+		if (result_index > wl->next_tx_complete) {
+			/* Only 1 write is needed */
+			wl1251_mem_write(wl,
+					 wl->data_path->tx_complete_addr +
+					 (wl->next_tx_complete *
+					  sizeof(struct tx_result)),
+					 &result[wl->next_tx_complete],
+					 num_complete *
+					 sizeof(struct tx_result));
+
+
+		} else if (result_index < wl->next_tx_complete) {
+			/* 2 writes are needed */
+			wl1251_mem_write(wl,
+					 wl->data_path->tx_complete_addr +
+					 (wl->next_tx_complete *
+					  sizeof(struct tx_result)),
+					 &result[wl->next_tx_complete],
+					 (FW_TX_CMPLT_BLOCK_SIZE -
+					  wl->next_tx_complete) *
+					 sizeof(struct tx_result));
+
+			wl1251_mem_write(wl,
+					 wl->data_path->tx_complete_addr,
+					 result,
+					 (num_complete -
+					  FW_TX_CMPLT_BLOCK_SIZE +
+					  wl->next_tx_complete) *
+					 sizeof(struct tx_result));
+
+		} else {
+			/* We have to write the whole array */
+			wl1251_mem_write(wl,
+					 wl->data_path->tx_complete_addr,
+					 result,
+					 FW_TX_CMPLT_BLOCK_SIZE *
+					 sizeof(struct tx_result));
+		}
+
+	}
+
+	wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl1251_tx_flush(struct wl1251 *wl)
+{
+	int i;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *info;
+
+	/* TX failure */
+/* 	control->flags = 0; FIXME */
+
+	while ((skb = skb_dequeue(&wl->tx_queue))) {
+		info = IEEE80211_SKB_CB(skb);
+
+		wl1251_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+		if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+				continue;
+
+		ieee80211_tx_status(wl->hw, skb);
+	}
+
+	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+		if (wl->tx_frames[i] != NULL) {
+			skb = wl->tx_frames[i];
+			info = IEEE80211_SKB_CB(skb);
+
+			if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+				continue;
+
+			ieee80211_tx_status(wl->hw, skb);
+			wl->tx_frames[i] = NULL;
+		}
+}
diff --git a/drivers/net/wireless/ti/wl1251/tx.h b/drivers/net/wireless/ti/wl1251/tx.h
new file mode 100644
index 0000000..81338d3
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/tx.h
@@ -0,0 +1,231 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_TX_H__
+#define __WL1251_TX_H__
+
+#include <linux/bitops.h>
+#include "acx.h"
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ *    i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ *    buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ *    i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ *    buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ *    the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ *    transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ *    and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ *    host to process the new data. Note: interrupt will be send per packet if
+ *    TX complete indication was requested in tx_control or per crossing
+ *    aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ *    TxDescriptorDone information in a cyclic manner and clears both done_1
+ *    and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT	0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK   0xf
+
+#define WL1251_TX_ALIGN_TO 4
+#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
+			     ~(WL1251_TX_ALIGN_TO - 1))
+#define WL1251_TKIP_IV_SPACE 4
+
+struct tx_control {
+	/* Rate Policy (class) index */
+	unsigned rate_policy:3;
+
+	/* When set, no ack policy is expected */
+	unsigned ack_policy:1;
+
+	/*
+	 * Packet type:
+	 * 0 -> 802.11
+	 * 1 -> 802.3
+	 * 2 -> IP
+	 * 3 -> raw codec
+	 */
+	unsigned packet_type:2;
+
+	/* If set, this is a QoS-Null or QoS-Data frame */
+	unsigned qos:1;
+
+	/*
+	 * If set, the target triggers the tx complete INT
+	 * upon frame sending completion.
+	 */
+	unsigned tx_complete:1;
+
+	/* 2 bytes padding before packet header */
+	unsigned xfer_pad:1;
+
+	unsigned reserved:7;
+} __packed;
+
+
+struct tx_double_buffer_desc {
+	/* Length of payload, including headers. */
+	__le16 length;
+
+	/*
+	 * A bit mask that specifies the initial rate to be used
+	 * Possible values are:
+	 * 0x0001 - 1Mbits
+	 * 0x0002 - 2Mbits
+	 * 0x0004 - 5.5Mbits
+	 * 0x0008 - 6Mbits
+	 * 0x0010 - 9Mbits
+	 * 0x0020 - 11Mbits
+	 * 0x0040 - 12Mbits
+	 * 0x0080 - 18Mbits
+	 * 0x0100 - 22Mbits
+	 * 0x0200 - 24Mbits
+	 * 0x0400 - 36Mbits
+	 * 0x0800 - 48Mbits
+	 * 0x1000 - 54Mbits
+	 */
+	__le16 rate;
+
+	/* Time in us that a packet can spend in the target */
+	__le32 expiry_time;
+
+	/* index of the TX queue used for this packet */
+	u8 xmit_queue;
+
+	/* Used to identify a packet */
+	u8 id;
+
+	struct tx_control control;
+
+	/*
+	 * The FW should cut the packet into fragments
+	 * of this size.
+	 */
+	__le16 frag_threshold;
+
+	/* Numbers of HW queue blocks to be allocated */
+	u8 num_mem_blocks;
+
+	u8 reserved;
+} __packed;
+
+enum {
+	TX_SUCCESS              = 0,
+	TX_DMA_ERROR            = BIT(7),
+	TX_DISABLED             = BIT(6),
+	TX_RETRY_EXCEEDED       = BIT(5),
+	TX_TIMEOUT              = BIT(4),
+	TX_KEY_NOT_FOUND        = BIT(3),
+	TX_ENCRYPT_FAIL         = BIT(2),
+	TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+	/*
+	 * Ownership synchronization between the host and
+	 * the firmware. If done_1 and done_2 are cleared,
+	 * owned by the FW (no info ready).
+	 */
+	u8 done_1;
+
+	/* same as double_buffer_desc->id */
+	u8 id;
+
+	/*
+	 * Total air access duration consumed by this
+	 * packet, including all retries and overheads.
+	 */
+	u16 medium_usage;
+
+	/* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+	u32 medium_delay;
+
+	/* Time between host xfer and tx complete */
+	u32 fw_hnadling_time;
+
+	/* The LS-byte of the last TKIP sequence number. */
+	u8 lsb_seq_num;
+
+	/* Retry count */
+	u8 ack_failures;
+
+	/* At which rate we got a ACK */
+	u16 rate;
+
+	u16 reserved;
+
+	/* TX_* */
+	u8 status;
+
+	/* See done_1 */
+	u8 done_2;
+} __packed;
+
+static inline int wl1251_tx_get_queue(int queue)
+{
+	switch (queue) {
+	case 0:
+		return QOS_AC_VO;
+	case 1:
+		return QOS_AC_VI;
+	case 2:
+		return QOS_AC_BE;
+	case 3:
+		return QOS_AC_BK;
+	default:
+		return QOS_AC_BE;
+	}
+}
+
+void wl1251_tx_work(struct work_struct *work);
+void wl1251_tx_complete(struct wl1251 *wl);
+void wl1251_tx_flush(struct wl1251 *wl);
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h
new file mode 100644
index 0000000..9d8f581
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/wl1251.h
@@ -0,0 +1,446 @@
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_H__
+#define __WL1251_H__
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <net/mac80211.h>
+
+#define DRIVER_NAME "wl1251"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+	DEBUG_NONE	= 0,
+	DEBUG_IRQ	= BIT(0),
+	DEBUG_SPI	= BIT(1),
+	DEBUG_BOOT	= BIT(2),
+	DEBUG_MAILBOX	= BIT(3),
+	DEBUG_NETLINK	= BIT(4),
+	DEBUG_EVENT	= BIT(5),
+	DEBUG_TX	= BIT(6),
+	DEBUG_RX	= BIT(7),
+	DEBUG_SCAN	= BIT(8),
+	DEBUG_CRYPT	= BIT(9),
+	DEBUG_PSM	= BIT(10),
+	DEBUG_MAC80211	= BIT(11),
+	DEBUG_CMD	= BIT(12),
+	DEBUG_ACX	= BIT(13),
+	DEBUG_ALL	= ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl1251_error(fmt, arg...) \
+	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl1251_warning(fmt, arg...) \
+	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl1251_notice(fmt, arg...) \
+	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1251_info(fmt, arg...) \
+	printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1251_debug(level, fmt, arg...) \
+	do { \
+		if (level & DEBUG_LEVEL) \
+			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+	} while (0)
+
+#define wl1251_dump(level, prefix, buf, len)	\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       0);				\
+	} while (0)
+
+#define wl1251_dump_ascii(level, prefix, buf, len)	\
+	do { \
+		if (level & DEBUG_LEVEL) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       true);				\
+	} while (0)
+
+#define WL1251_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN |	\
+				  CFG_BSSID_FILTER_EN)
+
+#define WL1251_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN |  \
+				  CFG_RX_MGMT_EN |  \
+				  CFG_RX_DATA_EN |  \
+				  CFG_RX_CTL_EN |   \
+				  CFG_RX_BCN_EN |   \
+				  CFG_RX_AUTH_EN |  \
+				  CFG_RX_ASSOC_EN)
+
+#define WL1251_BUSY_WORD_LEN 8
+
+struct boot_attr {
+	u32 radio_type;
+	u8 mac_clock;
+	u8 arm_clock;
+	int firmware_debug;
+	u32 minor;
+	u32 major;
+	u32 bugfix;
+};
+
+enum wl1251_state {
+	WL1251_STATE_OFF,
+	WL1251_STATE_ON,
+	WL1251_STATE_PLT,
+};
+
+enum wl1251_partition_type {
+	PART_DOWN,
+	PART_WORK,
+	PART_DRPW,
+
+	PART_TABLE_LEN
+};
+
+enum wl1251_station_mode {
+	STATION_ACTIVE_MODE,
+	STATION_POWER_SAVE_MODE,
+	STATION_IDLE,
+};
+
+struct wl1251_partition {
+	u32 size;
+	u32 start;
+};
+
+struct wl1251_partition_set {
+	struct wl1251_partition mem;
+	struct wl1251_partition reg;
+};
+
+struct wl1251;
+
+struct wl1251_stats {
+	struct acx_statistics *fw_stats;
+	unsigned long fw_stats_update;
+
+	unsigned int retry_count;
+	unsigned int excessive_retries;
+};
+
+struct wl1251_debugfs {
+	struct dentry *rootdir;
+	struct dentry *fw_statistics;
+
+	struct dentry *tx_internal_desc_overflow;
+
+	struct dentry *rx_out_of_mem;
+	struct dentry *rx_hdr_overflow;
+	struct dentry *rx_hw_stuck;
+	struct dentry *rx_dropped;
+	struct dentry *rx_fcs_err;
+	struct dentry *rx_xfr_hint_trig;
+	struct dentry *rx_path_reset;
+	struct dentry *rx_reset_counter;
+
+	struct dentry *dma_rx_requested;
+	struct dentry *dma_rx_errors;
+	struct dentry *dma_tx_requested;
+	struct dentry *dma_tx_errors;
+
+	struct dentry *isr_cmd_cmplt;
+	struct dentry *isr_fiqs;
+	struct dentry *isr_rx_headers;
+	struct dentry *isr_rx_mem_overflow;
+	struct dentry *isr_rx_rdys;
+	struct dentry *isr_irqs;
+	struct dentry *isr_tx_procs;
+	struct dentry *isr_decrypt_done;
+	struct dentry *isr_dma0_done;
+	struct dentry *isr_dma1_done;
+	struct dentry *isr_tx_exch_complete;
+	struct dentry *isr_commands;
+	struct dentry *isr_rx_procs;
+	struct dentry *isr_hw_pm_mode_changes;
+	struct dentry *isr_host_acknowledges;
+	struct dentry *isr_pci_pm;
+	struct dentry *isr_wakeups;
+	struct dentry *isr_low_rssi;
+
+	struct dentry *wep_addr_key_count;
+	struct dentry *wep_default_key_count;
+	/* skipping wep.reserved */
+	struct dentry *wep_key_not_found;
+	struct dentry *wep_decrypt_fail;
+	struct dentry *wep_packets;
+	struct dentry *wep_interrupt;
+
+	struct dentry *pwr_ps_enter;
+	struct dentry *pwr_elp_enter;
+	struct dentry *pwr_missing_bcns;
+	struct dentry *pwr_wake_on_host;
+	struct dentry *pwr_wake_on_timer_exp;
+	struct dentry *pwr_tx_with_ps;
+	struct dentry *pwr_tx_without_ps;
+	struct dentry *pwr_rcvd_beacons;
+	struct dentry *pwr_power_save_off;
+	struct dentry *pwr_enable_ps;
+	struct dentry *pwr_disable_ps;
+	struct dentry *pwr_fix_tsf_ps;
+	/* skipping cont_miss_bcns_spread for now */
+	struct dentry *pwr_rcvd_awake_beacons;
+
+	struct dentry *mic_rx_pkts;
+	struct dentry *mic_calc_failure;
+
+	struct dentry *aes_encrypt_fail;
+	struct dentry *aes_decrypt_fail;
+	struct dentry *aes_encrypt_packets;
+	struct dentry *aes_decrypt_packets;
+	struct dentry *aes_encrypt_interrupt;
+	struct dentry *aes_decrypt_interrupt;
+
+	struct dentry *event_heart_beat;
+	struct dentry *event_calibration;
+	struct dentry *event_rx_mismatch;
+	struct dentry *event_rx_mem_empty;
+	struct dentry *event_rx_pool;
+	struct dentry *event_oom_late;
+	struct dentry *event_phy_transmit_error;
+	struct dentry *event_tx_stuck;
+
+	struct dentry *ps_pspoll_timeouts;
+	struct dentry *ps_upsd_timeouts;
+	struct dentry *ps_upsd_max_sptime;
+	struct dentry *ps_upsd_max_apturn;
+	struct dentry *ps_pspoll_max_apturn;
+	struct dentry *ps_pspoll_utilization;
+	struct dentry *ps_upsd_utilization;
+
+	struct dentry *rxpipe_rx_prep_beacon_drop;
+	struct dentry *rxpipe_descr_host_int_trig_rx_data;
+	struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+	struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+	struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+	struct dentry *tx_queue_len;
+	struct dentry *tx_queue_status;
+
+	struct dentry *retry_count;
+	struct dentry *excessive_retries;
+};
+
+struct wl1251_if_operations {
+	void (*read)(struct wl1251 *wl, int addr, void *buf, size_t len);
+	void (*write)(struct wl1251 *wl, int addr, void *buf, size_t len);
+	void (*read_elp)(struct wl1251 *wl, int addr, u32 *val);
+	void (*write_elp)(struct wl1251 *wl, int addr, u32 val);
+	int  (*power)(struct wl1251 *wl, bool enable);
+	void (*reset)(struct wl1251 *wl);
+	void (*enable_irq)(struct wl1251 *wl);
+	void (*disable_irq)(struct wl1251 *wl);
+};
+
+struct wl1251 {
+	struct ieee80211_hw *hw;
+	bool mac80211_registered;
+
+	void *if_priv;
+	const struct wl1251_if_operations *if_ops;
+
+	void (*set_power)(bool enable);
+	int irq;
+	bool use_eeprom;
+
+	spinlock_t wl_lock;
+
+	enum wl1251_state state;
+	struct mutex mutex;
+
+	int physical_mem_addr;
+	int physical_reg_addr;
+	int virtual_mem_addr;
+	int virtual_reg_addr;
+
+	int cmd_box_addr;
+	int event_box_addr;
+	struct boot_attr boot_attr;
+
+	u8 *fw;
+	size_t fw_len;
+	u8 *nvs;
+	size_t nvs_len;
+
+	u8 bssid[ETH_ALEN];
+	u8 mac_addr[ETH_ALEN];
+	u8 bss_type;
+	u8 listen_int;
+	int channel;
+
+	void *target_mem_map;
+	struct acx_data_path_params_resp *data_path;
+
+	/* Number of TX packets transferred to the FW, modulo 16 */
+	u32 data_in_count;
+
+	/* Frames scheduled for transmission, not handled yet */
+	struct sk_buff_head tx_queue;
+	bool tx_queue_stopped;
+
+	struct work_struct tx_work;
+	struct work_struct filter_work;
+
+	/* Pending TX frames */
+	struct sk_buff *tx_frames[16];
+
+	/*
+	 * Index pointing to the next TX complete entry
+	 * in the cyclic XT complete array we get from
+	 * the FW.
+	 */
+	u32 next_tx_complete;
+
+	/* FW Rx counter */
+	u32 rx_counter;
+
+	/* Rx frames handled */
+	u32 rx_handled;
+
+	/* Current double buffer */
+	u32 rx_current_buffer;
+	u32 rx_last_id;
+
+	/* The target interrupt mask */
+	u32 intr_mask;
+	struct work_struct irq_work;
+
+	/* The mbox event mask */
+	u32 event_mask;
+
+	/* Mailbox pointers */
+	u32 mbox_ptr[2];
+
+	/* Are we currently scanning */
+	bool scanning;
+
+	/* Default key (for WEP) */
+	u32 default_key;
+
+	unsigned int tx_mgmt_frm_rate;
+	unsigned int tx_mgmt_frm_mod;
+
+	unsigned int rx_config;
+	unsigned int rx_filter;
+
+	/* is firmware in elp mode */
+	bool elp;
+
+	struct delayed_work elp_work;
+
+	enum wl1251_station_mode station_mode;
+
+	/* PSM mode requested */
+	bool psm_requested;
+
+	u16 beacon_int;
+	u8 dtim_period;
+
+	/* in dBm */
+	int power_level;
+
+	int rssi_thold;
+
+	struct wl1251_stats stats;
+	struct wl1251_debugfs debugfs;
+
+	__le32 buffer_32;
+	u32 buffer_cmd;
+	u8 buffer_busyword[WL1251_BUSY_WORD_LEN];
+	struct wl1251_rx_descriptor *rx_descriptor;
+
+	struct ieee80211_vif *vif;
+
+	u32 chip_id;
+	char fw_ver[21];
+
+	/* Most recently reported noise in dBm */
+	s8 noise;
+};
+
+int wl1251_plt_start(struct wl1251 *wl);
+int wl1251_plt_stop(struct wl1251 *wl);
+
+struct ieee80211_hw *wl1251_alloc_hw(void);
+int wl1251_free_hw(struct wl1251 *wl);
+int wl1251_init_ieee80211(struct wl1251 *wl);
+void wl1251_enable_interrupts(struct wl1251 *wl);
+void wl1251_disable_interrupts(struct wl1251 *wl);
+
+#define DEFAULT_HW_GEN_MODULATION_TYPE    CCK_LONG /* Long Preamble */
+#define DEFAULT_HW_GEN_TX_RATE          RATE_2MBPS
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define WL1251_DEFAULT_POWER_LEVEL 20
+
+#define WL1251_TX_QUEUE_LOW_WATERMARK  10
+#define WL1251_TX_QUEUE_HIGH_WATERMARK 25
+
+#define WL1251_DEFAULT_BEACON_INT 100
+#define WL1251_DEFAULT_DTIM_PERIOD 1
+
+#define WL1251_DEFAULT_CHANNEL 0
+
+#define WL1251_DEFAULT_BET_CONSECUTIVE 10
+
+#define CHIP_ID_1251_PG10	           (0x7010101)
+#define CHIP_ID_1251_PG11	           (0x7020101)
+#define CHIP_ID_1251_PG12	           (0x7030101)
+#define CHIP_ID_1271_PG10	           (0x4030101)
+#define CHIP_ID_1271_PG20	           (0x4030111)
+
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
+
+#define WL1251_PART_DOWN_MEM_START	0x0
+#define WL1251_PART_DOWN_MEM_SIZE	0x16800
+#define WL1251_PART_DOWN_REG_START	REGISTERS_BASE
+#define WL1251_PART_DOWN_REG_SIZE	REGISTERS_DOWN_SIZE
+
+#define WL1251_PART_WORK_MEM_START	0x28000
+#define WL1251_PART_WORK_MEM_SIZE	0x14000
+#define WL1251_PART_WORK_REG_START	REGISTERS_BASE
+#define WL1251_PART_WORK_REG_SIZE	REGISTERS_WORK_SIZE
+
+#define WL1251_DEFAULT_LOW_RSSI_WEIGHT          10
+#define WL1251_DEFAULT_LOW_RSSI_DEPTH           10
+
+#endif
diff --git a/drivers/net/wireless/ti/wl1251/wl12xx_80211.h b/drivers/net/wireless/ti/wl1251/wl12xx_80211.h
new file mode 100644
index 0000000..04ed514
--- /dev/null
+++ b/drivers/net/wireless/ti/wl1251/wl12xx_80211.h
@@ -0,0 +1,155 @@
+#ifndef __WL12XX_80211_H__
+#define __WL12XX_80211_H__
+
+#include <linux/if_ether.h>	/* ETH_ALEN */
+
+/* RATES */
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	  0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	 (IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+	IEEE80211_CCK_RATE_5MB_MASK | \
+	IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK	  0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	  (IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+				      IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+
+/* This really should be 8, but not for our firmware */
+#define MAX_SUPPORTED_RATES 32
+#define MAX_COUNTRY_TRIPLETS 32
+
+/* Headers */
+struct ieee80211_header {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 da[ETH_ALEN];
+	u8 sa[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 payload[0];
+} __packed;
+
+struct wl12xx_ie_header {
+	u8 id;
+	u8 len;
+} __packed;
+
+/* IEs */
+
+struct wl12xx_ie_ssid {
+	struct wl12xx_ie_header header;
+	char ssid[IEEE80211_MAX_SSID_LEN];
+} __packed;
+
+struct wl12xx_ie_rates {
+	struct wl12xx_ie_header header;
+	u8 rates[MAX_SUPPORTED_RATES];
+} __packed;
+
+struct wl12xx_ie_ds_params {
+	struct wl12xx_ie_header header;
+	u8 channel;
+} __packed;
+
+struct country_triplet {
+	u8 channel;
+	u8 num_channels;
+	u8 max_tx_power;
+} __packed;
+
+struct wl12xx_ie_country {
+	struct wl12xx_ie_header header;
+	u8 country_string[IEEE80211_COUNTRY_STRING_LEN];
+	struct country_triplet triplets[MAX_COUNTRY_TRIPLETS];
+} __packed;
+
+
+/* Templates */
+
+struct wl12xx_beacon_template {
+	struct ieee80211_header header;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+	struct wl12xx_ie_ds_params ds_params;
+	struct wl12xx_ie_country country;
+} __packed;
+
+struct wl12xx_null_data_template {
+	struct ieee80211_header header;
+} __packed;
+
+struct wl12xx_ps_poll_template {
+	__le16 fc;
+	__le16 aid;
+	u8 bssid[ETH_ALEN];
+	u8 ta[ETH_ALEN];
+} __packed;
+
+struct wl12xx_qos_null_data_template {
+	struct ieee80211_header header;
+	__le16 qos_ctl;
+} __packed;
+
+struct wl12xx_probe_req_template {
+	struct ieee80211_header header;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+} __packed;
+
+
+struct wl12xx_probe_resp_template {
+	struct ieee80211_header header;
+	__le32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	struct wl12xx_ie_ssid ssid;
+	struct wl12xx_ie_rates rates;
+	struct wl12xx_ie_rates ext_rates;
+	struct wl12xx_ie_ds_params ds_params;
+	struct wl12xx_ie_country country;
+} __packed;
+
+#endif