drivers/net: Remove boolean comparisons to true/false

Booleans should not be compared to true or false
but be directly tested or tested with !.

Done via cocci script:

@@
bool t;
@@
- t == true
+ t
@@
bool t;
@@
- t != true
+ !t
@@
bool t;
@@
- t == false
+ !t
@@
bool t;
@@
- t != false
+ t

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 15 insertions, 16 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
index 0d8bf56..380e7d4 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/fw.c
@@ -272,7 +272,7 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 
 		/* Turn On CPU */
 		rtstatus = _rtl92s_firmware_enable_cpu(hw);
-		if (rtstatus != true) {
+		if (!rtstatus) {
 			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 				 "Enable CPU fail!\n");
 			goto status_check_fail;
@@ -445,14 +445,14 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 		rtstatus = _rtl92s_firmware_downloadcode(hw, puc_mappedfile,
 				ul_filelength);
 
-		if (rtstatus != true) {
+		if (!rtstatus) {
 			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
 			goto fail;
 		}
 
 		/* <3> Check whether load FW process is ready */
 		rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
-		if (rtstatus != true) {
+		if (!rtstatus) {
 			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
 			goto fail;
 		}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index 22098c2..b141c35 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -962,7 +962,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
 
 	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
-	if (rtl92s_phy_mac_config(hw) != true) {
+	if (!rtl92s_phy_mac_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
 		return rtstatus;
 	}
@@ -972,7 +972,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	rtl_write_dword(rtlpriv, CMDR, 0x37FC);
 
 	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
-	if (rtl92s_phy_bb_config(hw) != true) {
+	if (!rtl92s_phy_bb_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
 		return rtstatus;
 	}
@@ -1008,7 +1008,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	else
 		rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
 
-	if (rtl92s_phy_rf_config(hw) != true) {
+	if (!rtl92s_phy_rf_config(hw)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
 		return rtstatus;
 	}
@@ -1105,7 +1105,7 @@ void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 	if (check_bssid) {
 		reg_rcr |= (RCR_CBSSID);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
-	} else if (check_bssid == false) {
+	} else if (!check_bssid) {
 		reg_rcr &= (~RCR_CBSSID);
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
 	}
@@ -2306,7 +2306,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
 		rfpwr_toset = ERFON;
 		ppsc->hwradiooff = false;
 		actuallyset = true;
-	} else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) {
+	} else if ((!ppsc->hwradiooff) && (rfpwr_toset == ERFOFF)) {
 		RT_TRACE(rtlpriv, COMP_RF,
 			 DBG_DMESG, "RFKILL-HW Radio OFF, RF OFF\n");
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index 05b4e27..3bfc411 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -558,8 +558,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
 					RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
 						 "IPS Set eRf nic enable\n");
 					rtstatus = rtl_ps_enable_nic(hw);
-				} while ((rtstatus != true) &&
-					 (InitializeCount < 10));
+				} while (!rtstatus && (InitializeCount < 10));
 
 				RT_CLEAR_PS_LEVEL(ppsc,
 						  RT_RF_OFF_LEVL_HALT_NIC);
@@ -990,7 +989,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
 		rtstatus = false;
 	}
 
-	if (rtstatus != true) {
+	if (!rtstatus) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
 			 "Write BB Reg Fail!!\n");
 		goto phy_BB8190_Config_ParaFile_Fail;
@@ -1004,7 +1003,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
 		rtstatus = _rtl92s_phy_config_bb_with_pg(hw,
 						 BASEBAND_CONFIG_PHY_REG);
 	}
-	if (rtstatus != true) {
+	if (!rtstatus) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
 			 "_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
 		goto phy_BB8190_Config_ParaFile_Fail;
@@ -1013,7 +1012,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
 	/* 3. BB AGC table Initialization */
 	rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
 
-	if (rtstatus != true) {
+	if (!rtstatus) {
 		pr_err("%s(): AGC Table Fail\n", __func__);
 		goto phy_BB8190_Config_ParaFile_Fail;
 	}
@@ -1270,7 +1269,7 @@ void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8	channel)
 	/* [0]:RF-A, [1]:RF-B */
 	u8 cckpowerlevel[2], ofdmpowerLevel[2];
 
-	if (rtlefuse->txpwr_fromeprom == false)
+	if (!rtlefuse->txpwr_fromeprom)
 		return;
 
 	/* Mainly we use RF-A Tx Power to write the Tx Power registers,
@@ -1621,7 +1620,7 @@ bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
 			break;
 		case FW_CMD_HIGH_PWR_ENABLE:
 			if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
-				(rtlpriv->dm.dynamic_txpower_enable != true)) {
+			    !rtlpriv->dm.dynamic_txpower_enable) {
 				fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
 					      FW_SS_CTL);
 				FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
index ad51906..08c2f56 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -499,7 +499,7 @@ bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
 			break;
 		}
 
-		if (rtstatus != true) {
+		if (!rtstatus) {
 			pr_err("Radio[%d] Fail!!\n", rfpath);
 			goto fail;
 		}