Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-core.h

7 files changed, 50 insertions, 52 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 8ff7db8..529a373 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -245,6 +245,25 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2800_mcu_request);
 
+int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+	return -EACCES;
+}
+EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
+
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 const struct rt2x00debug rt2800_rt2x00debug = {
 	.owner	= THIS_MODULE,
@@ -339,7 +358,7 @@ static int rt2800_blink_set(struct led_classdev *led_cdev,
 	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
 	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
 	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 3);
 	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
 	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
 	rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
@@ -347,7 +366,7 @@ static int rt2800_blink_set(struct led_classdev *led_cdev,
 	return 0;
 }
 
-void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+static void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
 		     struct rt2x00_led *led, enum led_type type)
 {
 	led->rt2x00dev = rt2x00dev;
@@ -356,7 +375,6 @@ void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt2800_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-EXPORT_SYMBOL_GPL(rt2800_init_led);
 #endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
@@ -1862,7 +1880,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	    !rt2x00_rf(rt2x00dev, RF3020) &&
 	    !rt2x00_rf(rt2x00dev, RF2020) &&
 	    !rt2x00_rf(rt2x00dev, RF3021) &&
-	    !rt2x00_rf(rt2x00dev, RF3022)) {
+	    !rt2x00_rf(rt2x00dev, RF3022) &&
+	    !rt2x00_rf(rt2x00dev, RF3052)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2047,7 +2066,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
 	if (rt2x00_rf(rt2x00dev, RF2820) ||
 	    rt2x00_rf(rt2x00dev, RF2720) ||
-	    (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(rt2x00dev, RF3052))) {
+	    rt2x00_rf(rt2x00dev, RF3052)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals;
 	} else if (rt2x00_rf(rt2x00dev, RF2850) || rt2x00_rf(rt2x00dev, RF2750)) {
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 535ce22..ebabeae 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -114,8 +114,6 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 extern const struct rt2x00debug rt2800_rt2x00debug;
 
 int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
-void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
-		     struct rt2x00_led *led, enum led_type type);
 int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
 			     struct rt2x00lib_crypto *crypto,
 			     struct ieee80211_key_conf *key);
@@ -139,6 +137,7 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 int rt2800_init_registers(struct rt2x00_dev *rt2x00dev);
 int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev);
 int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev);
+int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev);
 
 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
 void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 99095e1..d64181c 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -453,24 +453,6 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
 }
 
-static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-			return 0;
-
-		msleep(1);
-	}
-
-	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-	return -EACCES;
-}
-
 static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -479,10 +461,10 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all registers.
 	 */
-	if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800pci_init_queues(rt2x00dev) ||
 		     rt2800_init_registers(rt2x00dev) ||
-		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800_init_bbp(rt2x00dev) ||
 		     rt2800_init_rfcsr(rt2x00dev)))
 		return -EIO;
@@ -562,7 +544,7 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
 
 	/* Wait for DMA, ignore error */
-	rt2800pci_wait_wpdma_ready(rt2x00dev);
+	rt2800_wait_wpdma_ready(rt2x00dev);
 }
 
 static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 0510f02..82755cf 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -248,24 +248,6 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 }
 
-static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
-		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
-			return 0;
-
-		msleep(1);
-	}
-
-	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
-	return -EACCES;
-}
-
 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -274,7 +256,7 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all registers.
 	 */
-	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+	if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
 		     rt2800_init_registers(rt2x00dev) ||
 		     rt2800_init_bbp(rt2x00dev) ||
 		     rt2800_init_rfcsr(rt2x00dev)))
@@ -344,7 +326,7 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
 
 	/* Wait for DMA, ignore error */
-	rt2800usb_wait_wpdma_ready(rt2x00dev);
+	rt2800_wait_wpdma_ready(rt2x00dev);
 
 	rt2x00usb_disable_radio(rt2x00dev);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index b4c6e0a..096da85a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -119,6 +119,12 @@
 	(  ((unsigned long)((__skb)->data + (__header))) & 3 )
 
 /*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE	4 /* Only whole frame needs alignment */
+#define RT2X00_L2PAD_SIZE	8 /* Both header & payload need alignment */
+
+/*
  * Standard timing and size defines.
  * These values should follow the ieee80211 specifications.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index d7711e4..b93731b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -688,7 +688,17 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize extra TX headroom required.
 	 */
-	rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+	rt2x00dev->hw->extra_tx_headroom =
+		max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+		      rt2x00dev->ops->extra_tx_headroom);
+
+	/*
+	 * Take TX headroom required for alignment into account.
+	 */
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+	else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
 
 	/*
 	 * Register HW.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 3d8fb68..0b4801a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -104,7 +104,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	 * is also mapped to the DMA so it can be used for transfering
 	 * additional descriptor information to the hardware.
 	 */
-	skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+	skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
 
 	skbdesc->skb_dma =
 	    dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -112,7 +112,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	/*
 	 * Restore data pointer to original location again.
 	 */
-	skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+	skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
 
 	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
 }
@@ -134,7 +134,7 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 		 * by the driver, but it was actually mapped to DMA.
 		 */
 		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
-				 skb->len + rt2x00dev->hw->extra_tx_headroom,
+				 skb->len + rt2x00dev->ops->extra_tx_headroom,
 				 DMA_TO_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
 	}