Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...

1 files changed, 0 insertions, 125 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
index de49008..d3e0a07 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -19,67 +19,6 @@
 #include "rsi_usb.h"
 
 /**
- * rsi_copy_to_card() - This function includes the actual funtionality of
- *			copying the TA firmware to the card.Basically this
- *			function includes opening the TA file,reading the TA
- *			file and writing their values in blocks of data.
- * @common: Pointer to the driver private structure.
- * @fw: Pointer to the firmware value to be written.
- * @len: length of firmware file.
- * @num_blocks: Number of blocks to be written to the card.
- *
- * Return: 0 on success and -1 on failure.
- */
-static int rsi_copy_to_card(struct rsi_common *common,
-			    const u8 *fw,
-			    u32 len,
-			    u32 num_blocks)
-{
-	struct rsi_hw *adapter = common->priv;
-	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
-	u32 indx, ii;
-	u32 block_size = dev->tx_blk_size;
-	u32 lsb_address;
-	u32 base_address;
-
-	base_address = TA_LOAD_ADDRESS;
-
-	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
-		lsb_address = base_address;
-		if (rsi_usb_write_register_multiple(adapter,
-						    lsb_address,
-						    (u8 *)(fw + indx),
-						    block_size)) {
-			rsi_dbg(ERR_ZONE,
-				"%s: Unable to load %s blk\n", __func__,
-				FIRMWARE_RSI9113);
-			return -EIO;
-		}
-		rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
-		base_address += block_size;
-	}
-
-	if (len % block_size) {
-		lsb_address = base_address;
-		if (rsi_usb_write_register_multiple(adapter,
-						    lsb_address,
-						    (u8 *)(fw + indx),
-						    len % block_size)) {
-			rsi_dbg(ERR_ZONE,
-				"%s: Unable to load %s blk\n", __func__,
-				FIRMWARE_RSI9113);
-			return -EIO;
-		}
-	}
-	rsi_dbg(INIT_ZONE,
-		"%s: Succesfully loaded %s instructions\n", __func__,
-		FIRMWARE_RSI9113);
-
-	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
-	return 0;
-}
-
-/**
  * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
  *			 the USB device.
  * @common: Pointer to the driver private structure.
@@ -119,67 +58,3 @@ out:
 	complete_and_exit(&dev->rx_thread.completion, 0);
 }
 
-
-/**
- * rsi_load_ta_instructions() - This function includes the actual funtionality
- *				of loading the TA firmware.This function also
- *				includes opening the TA file,reading the TA
- *				file and writing their value in blocks of data.
- * @common: Pointer to the driver private structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-static int rsi_load_ta_instructions(struct rsi_common *common)
-{
-	struct rsi_hw *adapter = common->priv;
-	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
-	const struct firmware *fw_entry = NULL;
-	u32 block_size = dev->tx_blk_size;
-	const u8 *fw;
-	u32 num_blocks, len;
-	int status = 0;
-
-	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
-	if (status < 0) {
-		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
-			__func__, FIRMWARE_RSI9113);
-		return status;
-	}
-
-	/* Copy firmware into DMA-accessible memory */
-	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
-	if (!fw) {
-		status = -ENOMEM;
-		goto out;
-	}
-	len = fw_entry->size;
-
-	if (len % 4)
-		len += (4 - (len % 4));
-
-	num_blocks = (len / block_size);
-
-	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
-	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
-
-	status = rsi_copy_to_card(common, fw, len, num_blocks);
-	kfree(fw);
-
-out:
-	release_firmware(fw_entry);
-	return status;
-}
-
-/**
- * rsi_device_init() - This Function Initializes The HAL.
- * @common: Pointer to the driver private structure.
- *
- * Return: 0 on success, -1 on failure.
- */
-int rsi_usb_device_init(struct rsi_common *common)
-{
-	if (rsi_load_ta_instructions(common))
-		return -EIO;
-
-	return 0;
-		}