Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

1 files changed, 123 insertions, 34 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index e5ea99b..8d3a483 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -138,12 +138,15 @@ static int rsi_issue_sdiocommand(struct sdio_func *func,
 static void rsi_handle_interrupt(struct sdio_func *function)
 {
 	struct rsi_hw *adapter = sdio_get_drvdata(function);
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 
 	if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED)
 		return;
-	sdio_release_host(function);
+
+	dev->sdio_irq_task = current;
 	rsi_interrupt_handler(adapter);
-	sdio_claim_host(function);
+	dev->sdio_irq_task = NULL;
 }
 
 /**
@@ -219,26 +222,18 @@ static void rsi_reset_card(struct sdio_func *pfunction)
 	if (err)
 		rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);
 
-	if (!host->ocr_avail) {
-		/* Issue CMD5, arg = 0 */
-		err = rsi_issue_sdiocommand(pfunction,
-					    SD_IO_SEND_OP_COND,
-					    0,
-					    (MMC_RSP_R4 | MMC_CMD_BCR),
-					    &resp);
-		if (err)
-			rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
-				__func__, err);
-		host->ocr_avail = resp;
-	}
+	/* Issue CMD5, arg = 0 */
+	err = rsi_issue_sdiocommand(pfunction,	SD_IO_SEND_OP_COND, 0,
+				    (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
+	if (err)
+		rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", __func__, err);
+	card->ocr = resp;
 
 	/* Issue CMD5, arg = ocr. Wait till card is ready  */
 	for (i = 0; i < 100; i++) {
-		err = rsi_issue_sdiocommand(pfunction,
-					    SD_IO_SEND_OP_COND,
-					    host->ocr_avail,
-					    (MMC_RSP_R4 | MMC_CMD_BCR),
-					    &resp);
+		err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND,
+					    card->ocr,
+					    (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
 		if (err) {
 			rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
 				__func__, err);
@@ -415,14 +410,16 @@ int rsi_sdio_read_register(struct rsi_hw *adapter,
 	u8 fun_num = 0;
 	int status;
 
-	sdio_claim_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_claim_host(dev->pfunction);
 
 	if (fun_num == 0)
 		*data = sdio_f0_readb(dev->pfunction, addr, &status);
 	else
 		*data = sdio_readb(dev->pfunction, addr, &status);
 
-	sdio_release_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_release_host(dev->pfunction);
 
 	return status;
 }
@@ -446,14 +443,16 @@ int rsi_sdio_write_register(struct rsi_hw *adapter,
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	int status = 0;
 
-	sdio_claim_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_claim_host(dev->pfunction);
 
 	if (function == 0)
 		sdio_f0_writeb(dev->pfunction, *data, addr, &status);
 	else
 		sdio_writeb(dev->pfunction, *data, addr, &status);
 
-	sdio_release_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_release_host(dev->pfunction);
 
 	return status;
 }
@@ -498,11 +497,13 @@ static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u32 status;
 
-	sdio_claim_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_claim_host(dev->pfunction);
 
 	status =  sdio_readsb(dev->pfunction, data, addr, count);
 
-	sdio_release_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_release_host(dev->pfunction);
 
 	if (status != 0)
 		rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__);
@@ -540,11 +541,13 @@ int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
 		dev->write_fail++;
 	}
 
-	sdio_claim_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_claim_host(dev->pfunction);
 
 	status = sdio_writesb(dev->pfunction, addr, data, count);
 
-	sdio_release_host(dev->pfunction);
+	if (likely(dev->sdio_irq_task != current))
+		sdio_release_host(dev->pfunction);
 
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n",
@@ -581,7 +584,6 @@ static int rsi_sdio_load_data_master_write(struct rsi_hw *adapter,
 	}
 
 	for (offset = 0, i = 0; i < num_blocks; i++, offset += block_size) {
-		memset(temp_buf, 0, block_size);
 		memcpy(temp_buf, ta_firmware + offset, block_size);
 		lsb_address = (u16)base_address;
 		status = rsi_sdio_write_register_multiple
@@ -857,7 +859,7 @@ static int rsi_init_sdio_interface(struct rsi_hw *adapter,
 	sdio_release_host(pfunction);
 
 	adapter->determine_event_timeout = rsi_sdio_determine_event_timeout;
-	adapter->check_hw_queue_status = rsi_sdio_read_buffer_status_register;
+	adapter->check_hw_queue_status = rsi_sdio_check_buffer_status;
 
 #ifdef CONFIG_RSI_DEBUGFS
 	adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES;
@@ -941,6 +943,84 @@ fail:
 	return 1;
 }
 
+static void ulp_read_write(struct rsi_hw *adapter, u16 addr, u32 data,
+			   u16 len_in_bits)
+{
+	rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG1,
+				  ((addr << 6) | ((data >> 16) & 0xffff)), 2);
+	rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG0,
+				  (data & 0xffff), 2);
+	rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG0,
+				  RSI_GSPI_CTRL_REG0_VALUE, 2);
+	rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG1,
+				  ((len_in_bits - 1) | RSI_GSPI_TRIG), 2);
+	msleep(20);
+}
+
+/*This function resets and re-initializes the chip.*/
+static void rsi_reset_chip(struct rsi_hw *adapter)
+{
+	__le32 data;
+	u8 sdio_interrupt_status = 0;
+	u8 request = 1;
+	int ret;
+
+	rsi_dbg(INFO_ZONE, "Writing disable to wakeup register\n");
+	ret =  rsi_sdio_write_register(adapter, 0, SDIO_WAKEUP_REG, &request);
+	if (ret < 0) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO wakeup register\n", __func__);
+		return;
+	}
+	msleep(20);
+	ret =  rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER,
+				      &sdio_interrupt_status);
+	if (ret < 0) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to Read Intr Status Register\n",
+			__func__);
+		return;
+	}
+	rsi_dbg(INFO_ZONE, "%s: Intr Status Register value = %d\n",
+		__func__, sdio_interrupt_status);
+
+	/* Put Thread-Arch processor on hold */
+	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return;
+	}
+
+	data = TA_HOLD_THREAD_VALUE;
+	if (rsi_sdio_write_register_multiple(adapter, TA_HOLD_THREAD_REG |
+					     RSI_SD_REQUEST_MASTER,
+					     (u8 *)&data, 4)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to hold Thread-Arch processor threads\n",
+			__func__);
+		return;
+	}
+
+	/* This msleep will ensure Thread-Arch processor to go to hold
+	 * and any pending dma transfers to rf spi in device to finish.
+	 */
+	msleep(100);
+
+	ulp_read_write(adapter, RSI_ULP_RESET_REG, RSI_ULP_WRITE_0, 32);
+	ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_1, RSI_ULP_WRITE_2, 32);
+	ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_2, RSI_ULP_WRITE_0, 32);
+	ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_1, RSI_ULP_WRITE_50,
+		       32);
+	ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_2, RSI_ULP_WRITE_0,
+		       32);
+	ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_ENABLE,
+		       RSI_ULP_TIMER_ENABLE, 32);
+	/* This msleep will be sufficient for the ulp
+	 * read write operations to complete for chip reset.
+	 */
+	msleep(500);
+}
+
 /**
  * rsi_disconnect() - This function performs the reverse of the probe function.
  * @pfunction: Pointer to the sdio_func structure.
@@ -956,17 +1036,26 @@ static void rsi_disconnect(struct sdio_func *pfunction)
 		return;
 
 	dev = (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	sdio_claim_host(pfunction);
+	sdio_release_irq(pfunction);
+	sdio_release_host(pfunction);
+	mdelay(10);
 
-	dev->write_fail = 2;
 	rsi_mac80211_detach(adapter);
+	mdelay(10);
+
+	/* Reset Chip */
+	rsi_reset_chip(adapter);
 
-	sdio_claim_host(pfunction);
-	sdio_release_irq(pfunction);
-	sdio_disable_func(pfunction);
-	rsi_91x_deinit(adapter);
 	/* Resetting to take care of the case, where-in driver is re-loaded */
+	sdio_claim_host(pfunction);
 	rsi_reset_card(pfunction);
+	sdio_disable_func(pfunction);
 	sdio_release_host(pfunction);
+	dev->write_fail = 2;
+	rsi_91x_deinit(adapter);
+	rsi_dbg(ERR_ZONE, "##### RSI SDIO device disconnected #####\n");
+
 }
 
 #ifdef CONFIG_PM