summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/orinoco
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-05-20 21:04:44 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-05-20 21:04:44 -0700
commitf8965467f366fd18f01feafb5db10512d7b4422c (patch)
tree3706a9cd779859271ca61b85c63a1bc3f82d626e /drivers/net/wireless/orinoco
parenta26272e5200765691e67d6780e52b32498fdb659 (diff)
parent2ec8c6bb5d8f3a62a79f463525054bae1e3d4487 (diff)
downloadop-kernel-dev-f8965467f366fd18f01feafb5db10512d7b4422c.zip
op-kernel-dev-f8965467f366fd18f01feafb5db10512d7b4422c.tar.gz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
Diffstat (limited to 'drivers/net/wireless/orinoco')
-rw-r--r--drivers/net/wireless/orinoco/Kconfig20
-rw-r--r--drivers/net/wireless/orinoco/Makefile4
-rw-r--r--drivers/net/wireless/orinoco/airport.c8
-rw-r--r--drivers/net/wireless/orinoco/cfg.c91
-rw-r--r--drivers/net/wireless/orinoco/fw.c10
-rw-r--r--drivers/net/wireless/orinoco/hermes.c286
-rw-r--r--drivers/net/wireless/orinoco/hermes.h62
-rw-r--r--drivers/net/wireless/orinoco/hermes_dld.c243
-rw-r--r--drivers/net/wireless/orinoco/hw.c102
-rw-r--r--drivers/net/wireless/orinoco/hw.h1
-rw-r--r--drivers/net/wireless/orinoco/main.c307
-rw-r--r--drivers/net/wireless/orinoco/main.h12
-rw-r--r--drivers/net/wireless/orinoco/orinoco.h38
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c85
-rw-r--r--drivers/net/wireless/orinoco/orinoco_nortel.c2
-rw-r--r--drivers/net/wireless/orinoco/orinoco_pci.c2
-rw-r--r--drivers/net/wireless/orinoco/orinoco_plx.c2
-rw-r--r--drivers/net/wireless/orinoco/orinoco_tmd.c2
-rw-r--r--drivers/net/wireless/orinoco/orinoco_usb.c1795
-rw-r--r--drivers/net/wireless/orinoco/scan.c4
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c7
-rw-r--r--drivers/net/wireless/orinoco/wext.c273
22 files changed, 2614 insertions, 742 deletions
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index e2a2c18..60819bc 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -27,6 +27,17 @@ config HERMES
configure your card and that /etc/pcmcia/wireless.opts works :
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+config HERMES_PRISM
+ bool "Support Prism 2/2.5 chipset"
+ depends on HERMES
+ ---help---
+
+ Say Y to enable support for Prism 2 and 2.5 chipsets. These
+ chipsets are better handled by the hostap driver. This driver
+ would not support WPA or firmware download for Prism chipset.
+
+ If you are not sure, say N.
+
config HERMES_CACHE_FW_ON_INIT
bool "Cache Hermes firmware on driver initialisation"
depends on HERMES
@@ -86,7 +97,7 @@ config NORTEL_HERMES
config PCI_HERMES
tristate "Prism 2.5 PCI 802.11b adaptor support"
- depends on PCI && HERMES
+ depends on PCI && HERMES && HERMES_PRISM
help
Enable support for PCI and mini-PCI 802.11b wireless NICs based on
the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
@@ -121,3 +132,10 @@ config PCMCIA_SPECTRUM
This driver requires firmware download on startup. Utilities
for downloading Symbol firmware are available at
<http://sourceforge.net/projects/orinoco/>
+
+config ORINOCO_USB
+ tristate "Agere Orinoco USB support"
+ depends on USB && HERMES
+ select FW_LOADER
+ ---help---
+ This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile
index 9abd632..bfdefb8 100644
--- a/drivers/net/wireless/orinoco/Makefile
+++ b/drivers/net/wireless/orinoco/Makefile
@@ -11,3 +11,7 @@ obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o
obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o
obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o
obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o
+obj-$(CONFIG_ORINOCO_USB) += orinoco_usb.o
+
+# Orinoco should be endian clean.
+ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c
index c60df2c..9bcee10 100644
--- a/drivers/net/wireless/orinoco/airport.c
+++ b/drivers/net/wireless/orinoco/airport.c
@@ -77,9 +77,9 @@ airport_resume(struct macio_dev *mdev)
enable_irq(card->irq);
- spin_lock_irqsave(&priv->lock, flags);
+ priv->hw.ops->lock_irqsave(&priv->lock, &flags);
err = orinoco_up(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
return err;
}
@@ -195,7 +195,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
ssleep(1);
/* Reset it before we get the interrupt */
- hermes_init(hw);
+ hw->ops->init(hw);
if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) {
printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq);
@@ -210,7 +210,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
}
/* Register an interface with the stack */
- if (orinoco_if_add(priv, phys_addr, card->irq) != 0) {
+ if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c
index 27f2d33..8c4169c 100644
--- a/drivers/net/wireless/orinoco/cfg.c
+++ b/drivers/net/wireless/orinoco/cfg.c
@@ -88,7 +88,9 @@ int orinoco_wiphy_register(struct wiphy *wiphy)
wiphy->rts_threshold = priv->rts_thresh;
if (!priv->has_mwo)
- wiphy->frag_threshold = priv->frag_thresh;
+ wiphy->frag_threshold = priv->frag_thresh + 1;
+ wiphy->retry_short = priv->short_retry_limit;
+ wiphy->retry_long = priv->long_retry_limit;
return wiphy_register(wiphy);
}
@@ -157,6 +159,7 @@ static int orinoco_scan(struct wiphy *wiphy, struct net_device *dev,
}
static int orinoco_set_channel(struct wiphy *wiphy,
+ struct net_device *netdev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type)
{
@@ -187,7 +190,7 @@ static int orinoco_set_channel(struct wiphy *wiphy,
if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
/* Fast channel change - no commit if successful */
hermes_t *hw = &priv->hw;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
HERMES_TEST_SET_CHANNEL,
channel, NULL);
}
@@ -196,8 +199,92 @@ static int orinoco_set_channel(struct wiphy *wiphy,
return err;
}
+static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+ struct orinoco_private *priv = wiphy_priv(wiphy);
+ int frag_value = -1;
+ int rts_value = -1;
+ int err = 0;
+
+ if (changed & WIPHY_PARAM_RETRY_SHORT) {
+ /* Setting short retry not supported */
+ err = -EINVAL;
+ }
+
+ if (changed & WIPHY_PARAM_RETRY_LONG) {
+ /* Setting long retry not supported */
+ err = -EINVAL;
+ }
+
+ if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+ /* Set fragmentation */
+ if (priv->has_mwo) {
+ if (wiphy->frag_threshold < 0)
+ frag_value = 0;
+ else {
+ printk(KERN_WARNING "%s: Fixed fragmentation "
+ "is not supported on this firmware. "
+ "Using MWO robust instead.\n",
+ priv->ndev->name);
+ frag_value = 1;
+ }
+ } else {
+ if (wiphy->frag_threshold < 0)
+ frag_value = 2346;
+ else if ((wiphy->frag_threshold < 257) ||
+ (wiphy->frag_threshold > 2347))
+ err = -EINVAL;
+ else
+ /* cfg80211 value is 257-2347 (odd only)
+ * orinoco rid has range 256-2346 (even only) */
+ frag_value = wiphy->frag_threshold & ~0x1;
+ }
+ }
+
+ if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+ /* Set RTS.
+ *
+ * Prism documentation suggests default of 2432,
+ * and a range of 0-3000.
+ *
+ * Current implementation uses 2347 as the default and
+ * the upper limit.
+ */
+
+ if (wiphy->rts_threshold < 0)
+ rts_value = 2347;
+ else if (wiphy->rts_threshold > 2347)
+ err = -EINVAL;
+ else
+ rts_value = wiphy->rts_threshold;
+ }
+
+ if (!err) {
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (frag_value >= 0) {
+ if (priv->has_mwo)
+ priv->mwo_robust = frag_value;
+ else
+ priv->frag_thresh = frag_value;
+ }
+ if (rts_value >= 0)
+ priv->rts_thresh = rts_value;
+
+ err = orinoco_commit(priv);
+
+ orinoco_unlock(priv, &flags);
+ }
+
+ return err;
+}
+
const struct cfg80211_ops orinoco_cfg_ops = {
.change_virtual_intf = orinoco_change_vif,
.set_channel = orinoco_set_channel,
.scan = orinoco_scan,
+ .set_wiphy_params = orinoco_set_wiphy_params,
};
diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c
index 5ea0f7c..3e1947d 100644
--- a/drivers/net/wireless/orinoco/fw.c
+++ b/drivers/net/wireless/orinoco/fw.c
@@ -122,7 +122,7 @@ orinoco_dl_firmware(struct orinoco_private *priv,
dev_dbg(dev, "Attempting to download firmware %s\n", firmware);
/* Read current plug data */
- err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0);
+ err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
dev_dbg(dev, "Read PDA returned %d\n", err);
if (err)
goto free;
@@ -149,7 +149,7 @@ orinoco_dl_firmware(struct orinoco_private *priv,
}
/* Enable aux port to allow programming */
- err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point));
+ err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point));
dev_dbg(dev, "Program init returned %d\n", err);
if (err != 0)
goto abort;
@@ -177,7 +177,7 @@ orinoco_dl_firmware(struct orinoco_private *priv,
goto abort;
/* Tell card we've finished */
- err = hermesi_program_end(hw);
+ err = hw->ops->program_end(hw);
dev_dbg(dev, "Program end returned %d\n", err);
if (err != 0)
goto abort;
@@ -224,7 +224,7 @@ symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
if (!pda)
return -ENOMEM;
- ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1);
+ ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
if (ret)
goto free;
}
@@ -260,7 +260,7 @@ symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
}
/* Reset hermes chip and make sure it responds */
- ret = hermes_init(hw);
+ ret = hw->ops->init(hw);
/* hermes_reset() should return 0 with the secondary firmware */
if (secondary && ret != 0)
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c
index 1a2fca7..6c6a23e 100644
--- a/drivers/net/wireless/orinoco/hermes.c
+++ b/drivers/net/wireless/orinoco/hermes.c
@@ -52,6 +52,26 @@
#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
/*
+ * AUX port access. To unlock the AUX port write the access keys to the
+ * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
+ * register. Then read it and make sure it's HERMES_AUX_ENABLED.
+ */
+#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
+#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
+#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
+#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
+
+#define HERMES_AUX_PW0 0xFE01
+#define HERMES_AUX_PW1 0xDC23
+#define HERMES_AUX_PW2 0xBA45
+
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
+
+/*
* Debugging helpers
*/
@@ -70,6 +90,7 @@
#endif /* ! HERMES_DEBUG */
+static const struct hermes_ops hermes_ops_local;
/*
* Internal functions
@@ -111,9 +132,9 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0,
*/
/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp)
+static int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp)
{
int err = 0;
int k;
@@ -163,17 +184,18 @@ int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
out:
return err;
}
-EXPORT_SYMBOL(hermes_doicmd_wait);
void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
{
hw->iobase = address;
hw->reg_spacing = reg_spacing;
hw->inten = 0x0;
+ hw->eeprom_pda = false;
+ hw->ops = &hermes_ops_local;
}
EXPORT_SYMBOL(hermes_struct_init);
-int hermes_init(hermes_t *hw)
+static int hermes_init(hermes_t *hw)
{
u16 reg;
int err = 0;
@@ -217,7 +239,6 @@ int hermes_init(hermes_t *hw)
return err;
}
-EXPORT_SYMBOL(hermes_init);
/* Issue a command to the chip, and (busy!) wait for it to
* complete.
@@ -228,8 +249,8 @@ EXPORT_SYMBOL(hermes_init);
* > 0 on error returned by the firmware
*
* Callable from any context, but locking is your problem. */
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp)
+static int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp)
{
int err;
int k;
@@ -291,9 +312,8 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
out:
return err;
}
-EXPORT_SYMBOL(hermes_docmd_wait);
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
+static int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
{
int err = 0;
int k;
@@ -333,7 +353,6 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
return 0;
}
-EXPORT_SYMBOL(hermes_allocate);
/* Set up a BAP to read a particular chunk of data from card's internal buffer.
*
@@ -403,8 +422,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
* 0 on success
* > 0 on error from firmware
*/
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
- u16 id, u16 offset)
+static int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
+ u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
int err = 0;
@@ -422,7 +441,6 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
out:
return err;
}
-EXPORT_SYMBOL(hermes_bap_pread);
/* Write a block of data to the chip's buffer, via the
* BAP. Synchronization/serialization is the caller's problem.
@@ -432,8 +450,8 @@ EXPORT_SYMBOL(hermes_bap_pread);
* 0 on success
* > 0 on error from firmware
*/
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
- u16 id, u16 offset)
+static int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
+ u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
int err = 0;
@@ -451,7 +469,6 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
out:
return err;
}
-EXPORT_SYMBOL(hermes_bap_pwrite);
/* Read a Length-Type-Value record from the card.
*
@@ -461,8 +478,8 @@ EXPORT_SYMBOL(hermes_bap_pwrite);
* practice.
*
* Callable from user or bh context. */
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
- u16 *length, void *buf)
+static int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
+ u16 *length, void *buf)
{
int err = 0;
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -505,10 +522,9 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
return 0;
}
-EXPORT_SYMBOL(hermes_read_ltv);
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
- u16 length, const void *value)
+static int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *value)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
int err = 0;
@@ -533,4 +549,228 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
return err;
}
-EXPORT_SYMBOL(hermes_write_ltv);
+
+/*** Hermes AUX control ***/
+
+static inline void
+hermes_aux_setaddr(hermes_t *hw, u32 addr)
+{
+ hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
+ hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
+}
+
+static inline int
+hermes_aux_control(hermes_t *hw, int enabled)
+{
+ int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
+ int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
+ int i;
+
+ /* Already open? */
+ if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
+ return 0;
+
+ hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
+ hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
+ hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
+ hermes_write_reg(hw, HERMES_CONTROL, action);
+
+ for (i = 0; i < 20; i++) {
+ udelay(10);
+ if (hermes_read_reg(hw, HERMES_CONTROL) ==
+ desired_state)
+ return 0;
+ }
+
+ return -EBUSY;
+}
+
+/*** Hermes programming ***/
+
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+ int err;
+
+ /* Disable interrupts?*/
+ /*hw->inten = 0x0;*/
+ /*hermes_write_regn(hw, INTEN, 0);*/
+ /*hermes_set_irqmask(hw, 0);*/
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Using init_cmd_wait rather than cmd_wait */
+ err = hw->ops->init_cmd_wait(hw,
+ 0x0100 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hw->ops->init_cmd_wait(hw,
+ 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_aux_control(hw, 1);
+ pr_debug("AUX enable returned %d\n", err);
+
+ if (err)
+ return err;
+
+ pr_debug("Enabling volatile, EP 0x%08x\n", offset);
+ err = hw->ops->init_cmd_wait(hw,
+ HERMES_PROGRAM_ENABLE_VOLATILE,
+ offset & 0xFFFFu,
+ offset >> 16,
+ 0,
+ NULL);
+ pr_debug("PROGRAM_ENABLE returned %d\n", err);
+
+ return err;
+}
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+static int hermesi_program_end(hermes_t *hw)
+{
+ struct hermes_response resp;
+ int rc = 0;
+ int err;
+
+ rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+ pr_debug("PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
+
+ if ((rc == 0) &&
+ ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+ rc = -EIO;
+
+ err = hermes_aux_control(hw, 0);
+ pr_debug("AUX disable returned %d\n", err);
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Reinitialise, ignoring return */
+ (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+
+ return rc ? rc : err;
+}
+
+static int hermes_program_bytes(struct hermes *hw, const char *data,
+ u32 addr, u32 len)
+{
+ /* wl lkm splits the programming into chunks of 2000 bytes.
+ * This restriction appears to come from USB. The PCMCIA
+ * adapters can program the whole lot in one go */
+ hermes_aux_setaddr(hw, addr);
+ hermes_write_bytes(hw, HERMES_AUXDATA, data, len);
+ return 0;
+}
+
+/* Read PDA from the adapter */
+static int hermes_read_pda(hermes_t *hw, __le16 *pda, u32 pda_addr, u16 pda_len)
+{
+ int ret;
+ u16 pda_size;
+ u16 data_len = pda_len;
+ __le16 *data = pda;
+
+ if (hw->eeprom_pda) {
+ /* PDA of spectrum symbol is in eeprom */
+
+ /* Issue command to read EEPROM */
+ ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
+ if (ret)
+ return ret;
+ } else {
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+ data_len = pda_len - 4;
+ data = pda + 2;
+ }
+
+ /* Open auxiliary port */
+ ret = hermes_aux_control(hw, 1);
+ pr_debug("AUX enable returned %d\n", ret);
+ if (ret)
+ return ret;
+
+ /* Read PDA */
+ hermes_aux_setaddr(hw, pda_addr);
+ hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
+
+ /* Close aux port */
+ ret = hermes_aux_control(hw, 0);
+ pr_debug("AUX disable returned %d\n", ret);
+
+ /* Check PDA length */
+ pda_size = le16_to_cpu(pda[0]);
+ pr_debug("Actual PDA length %d, Max allowed %d\n",
+ pda_size, pda_len);
+ if (pda_size > pda_len)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void hermes_lock_irqsave(spinlock_t *lock,
+ unsigned long *flags) __acquires(lock)
+{
+ spin_lock_irqsave(lock, *flags);
+}
+
+static void hermes_unlock_irqrestore(spinlock_t *lock,
+ unsigned long *flags) __releases(lock)
+{
+ spin_unlock_irqrestore(lock, *flags);
+}
+
+static void hermes_lock_irq(spinlock_t *lock) __acquires(lock)
+{
+ spin_lock_irq(lock);
+}
+
+static void hermes_unlock_irq(spinlock_t *lock) __releases(lock)
+{
+ spin_unlock_irq(lock);
+}
+
+/* Hermes operations for local buses */
+static const struct hermes_ops hermes_ops_local = {
+ .init = hermes_init,
+ .cmd_wait = hermes_docmd_wait,
+ .init_cmd_wait = hermes_doicmd_wait,
+ .allocate = hermes_allocate,
+ .read_ltv = hermes_read_ltv,
+ .write_ltv = hermes_write_ltv,
+ .bap_pread = hermes_bap_pread,
+ .bap_pwrite = hermes_bap_pwrite,
+ .read_pda = hermes_read_pda,
+ .program_init = hermesi_program_init,
+ .program_end = hermesi_program_end,
+ .program = hermes_program_bytes,
+ .lock_irqsave = hermes_lock_irqsave,
+ .unlock_irqrestore = hermes_unlock_irqrestore,
+ .lock_irq = hermes_lock_irq,
+ .unlock_irq = hermes_unlock_irq,
+};
diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h
index 2dddbb5..9ca34e7 100644
--- a/drivers/net/wireless/orinoco/hermes.h
+++ b/drivers/net/wireless/orinoco/hermes.h
@@ -374,6 +374,37 @@ struct hermes_multicast {
/* Timeouts */
#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
+struct hermes;
+
+/* Functions to access hardware */
+struct hermes_ops {
+ int (*init)(struct hermes *hw);
+ int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp);
+ int (*init_cmd_wait)(struct hermes *hw, u16 cmd,
+ u16 parm0, u16 parm1, u16 parm2,
+ struct hermes_response *resp);
+ int (*allocate)(struct hermes *hw, u16 size, u16 *fid);
+ int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen,
+ u16 *length, void *buf);
+ int (*write_ltv)(struct hermes *hw, int bap, u16 rid,
+ u16 length, const void *value);
+ int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len,
+ u16 id, u16 offset);
+ int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf,
+ int len, u16 id, u16 offset);
+ int (*read_pda)(struct hermes *hw, __le16 *pda,
+ u32 pda_addr, u16 pda_len);
+ int (*program_init)(struct hermes *hw, u32 entry_point);
+ int (*program_end)(struct hermes *hw);
+ int (*program)(struct hermes *hw, const char *buf,
+ u32 addr, u32 len);
+ void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags);
+ void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags);
+ void (*lock_irq)(spinlock_t *lock);
+ void (*unlock_irq)(spinlock_t *lock);
+};
+
/* Basic control structure */
typedef struct hermes {
void __iomem *iobase;
@@ -381,6 +412,9 @@ typedef struct hermes {
#define HERMES_16BIT_REGSPACING 0
#define HERMES_32BIT_REGSPACING 1
u16 inten; /* Which interrupts should be enabled? */
+ bool eeprom_pda;
+ const struct hermes_ops *ops;
+ void *priv;
} hermes_t;
/* Register access convenience macros */
@@ -394,22 +428,6 @@ typedef struct hermes {
/* Function prototypes */
void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
-int hermes_init(hermes_t *hw);
-int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp);
-int hermes_doicmd_wait(hermes_t *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp);
-int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
-
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
- u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
- u16 id, u16 offset);
-int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
- u16 *length, void *buf);
-int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
- u16 length, const void *value);
/* Inline functions */
@@ -426,13 +444,13 @@ static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
static inline int hermes_enable_port(hermes_t *hw, int port)
{
- return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+ return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
0, NULL);
}
static inline int hermes_disable_port(hermes_t *hw, int port)
{
- return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
+ return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
0, NULL);
}
@@ -440,7 +458,7 @@ static inline int hermes_disable_port(hermes_t *hw, int port)
* information frame in __orinoco_ev_info() */
static inline int hermes_inquire(hermes_t *hw, u16 rid)
{
- return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+ return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
}
#define HERMES_BYTES_TO_RECLEN(n) ((((n)+1)/2) + 1)
@@ -475,10 +493,10 @@ static inline void hermes_clear_words(struct hermes *hw, int off,
}
#define HERMES_READ_RECORD(hw, bap, rid, buf) \
- (hermes_read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
+ (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
- (hermes_write_ltv((hw), (bap), (rid), \
- HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
+ (hw->ops->write_ltv((hw), (bap), (rid), \
+ HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
{
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index fb157eb..6da85e7 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -46,37 +46,11 @@
#define PFX "hermes_dld: "
-/*
- * AUX port access. To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register. Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
-#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
-
-#define HERMES_AUX_PW0 0xFE01
-#define HERMES_AUX_PW1 0xDC23
-#define HERMES_AUX_PW2 0xBA45
-
-/* HERMES_CMD_DOWNLD */
-#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
-
/* End markers used in dblocks */
#define PDI_END 0x00000000 /* End of PDA */
#define BLOCK_END 0xFFFFFFFF /* Last image block */
#define TEXT_END 0x1A /* End of text header */
-/* Limit the amout we try to download in a single shot.
- * Size is in bytes.
- */
-#define MAX_DL_SIZE 1024
-#define LIMIT_PROGRAM_SIZE 0
-
/*
* The following structures have little-endian fields denoted by
* the leading underscore. Don't access them directly - use inline
@@ -165,41 +139,6 @@ pdi_len(const struct pdi *pdi)
return 2 * (le16_to_cpu(pdi->len) - 1);
}
-/*** Hermes AUX control ***/
-
-static inline void
-hermes_aux_setaddr(hermes_t *hw, u32 addr)
-{
- hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
- hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-static inline int
-hermes_aux_control(hermes_t *hw, int enabled)
-{
- int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
- int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
- int i;
-
- /* Already open? */
- if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
- return 0;
-
- hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
- hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
- hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
- hermes_write_reg(hw, HERMES_CONTROL, action);
-
- for (i = 0; i < 20; i++) {
- udelay(10);
- if (hermes_read_reg(hw, HERMES_CONTROL) ==
- desired_state)
- return 0;
- }
-
- return -EBUSY;
-}
-
/*** Plug Data Functions ***/
/*
@@ -271,62 +210,7 @@ hermes_plug_pdi(hermes_t *hw, const struct pdr *first_pdr,
return -EINVAL;
/* do the actual plugging */
- hermes_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
-
- return 0;
-}
-
-/* Read PDA from the adapter */
-int hermes_read_pda(hermes_t *hw,
- __le16 *pda,
- u32 pda_addr,
- u16 pda_len,
- int use_eeprom) /* can we get this into hw? */
-{
- int ret;
- u16 pda_size;
- u16 data_len = pda_len;
- __le16 *data = pda;
-
- if (use_eeprom) {
- /* PDA of spectrum symbol is in eeprom */
-
- /* Issue command to read EEPROM */
- ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
- if (ret)
- return ret;
- } else {
- /* wl_lkm does not include PDA size in the PDA area.
- * We will pad the information into pda, so other routines
- * don't have to be modified */
- pda[0] = cpu_to_le16(pda_len - 2);
- /* Includes CFG_PROD_DATA but not itself */
- pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
- data_len = pda_len - 4;
- data = pda + 2;
- }
-
- /* Open auxiliary port */
- ret = hermes_aux_control(hw, 1);
- pr_debug(PFX "AUX enable returned %d\n", ret);
- if (ret)
- return ret;
-
- /* read PDA from EEPROM */
- hermes_aux_setaddr(hw, pda_addr);
- hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
-
- /* Close aux port */
- ret = hermes_aux_control(hw, 0);
- pr_debug(PFX "AUX disable returned %d\n", ret);
-
- /* Check PDA length */
- pda_size = le16_to_cpu(pda[0]);
- pr_debug(PFX "Actual PDA length %d, Max allowed %d\n",
- pda_size, pda_len);
- if (pda_size > pda_len)
- return -EINVAL;
+ hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
return 0;
}
@@ -389,101 +273,13 @@ hermes_blocks_length(const char *first_block, const void *end)
/*** Hermes programming ***/
-/* About to start programming data (Hermes I)
- * offset is the entry point
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_init(hermes_t *hw, u32 offset)
-{
- int err;
-
- /* Disable interrupts?*/
- /*hw->inten = 0x0;*/
- /*hermes_write_regn(hw, INTEN, 0);*/
- /*hermes_set_irqmask(hw, 0);*/
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Using doicmd_wait rather than docmd_wait */
- err = hermes_doicmd_wait(hw,
- 0x0100 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hermes_doicmd_wait(hw,
- 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hermes_aux_control(hw, 1);
- pr_debug(PFX "AUX enable returned %d\n", err);
-
- if (err)
- return err;
-
- pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset);
- err = hermes_doicmd_wait(hw,
- HERMES_PROGRAM_ENABLE_VOLATILE,
- offset & 0xFFFFu,
- offset >> 16,
- 0,
- NULL);
- pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err);
-
- return err;
-}
-
-/* Done programming data (Hermes I)
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-int hermesi_program_end(hermes_t *hw)
-{
- struct hermes_response resp;
- int rc = 0;
- int err;
-
- rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
-
- pr_debug(PFX "PROGRAM_DISABLE returned %d, "
- "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
- rc, resp.resp0, resp.resp1, resp.resp2);
-
- if ((rc == 0) &&
- ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
- rc = -EIO;
-
- err = hermes_aux_control(hw, 0);
- pr_debug(PFX "AUX disable returned %d\n", err);
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Reinitialise, ignoring return */
- (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
-
- return rc ? rc : err;
-}
-
/* Program the data blocks */
int hermes_program(hermes_t *hw, const char *first_block, const void *end)
{
const struct dblock *blk;
u32 blkaddr;
u32 blklen;
-#if LIMIT_PROGRAM_SIZE
- u32 addr;
- u32 len;
-#endif
+ int err = 0;
blk = (const struct dblock *) first_block;
@@ -498,30 +294,10 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end)
pr_debug(PFX "Programming block of length %d "
"to address 0x%08x\n", blklen, blkaddr);
-#if !LIMIT_PROGRAM_SIZE
- /* wl_lkm driver splits this into writes of 2000 bytes */
- hermes_aux_setaddr(hw, blkaddr);
- hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
- blklen);
-#else
- len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE;
- addr = blkaddr;
-
- while (addr < (blkaddr + blklen)) {
- pr_debug(PFX "Programming subblock of length %d "
- "to address 0x%08x. Data @ %p\n",
- len, addr, &blk->data[addr - blkaddr]);
-
- hermes_aux_setaddr(hw, addr);
- hermes_write_bytes(hw, HERMES_AUXDATA,
- &blk->data[addr - blkaddr],
- len);
-
- addr += len;
- len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ?
- (blkaddr + blklen - addr) : MAX_DL_SIZE;
- }
-#endif
+ err = hw->ops->program(hw, blk->data, blkaddr, blklen);
+ if (err)
+ break;
+
blk = (const struct dblock *) &blk->data[blklen];
if ((void *) blk > (end - sizeof(*blk)))
@@ -530,7 +306,7 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end)
blkaddr = dblock_addr(blk);
blklen = dblock_len(blk);
}
- return 0;
+ return err;
}
/*** Default plugging data for Hermes I ***/
@@ -690,9 +466,8 @@ int hermes_apply_pda_with_defaults(hermes_t *hw,
if ((pdi_len(pdi) == pdr_len(pdr)) &&
((void *) pdi->data + pdi_len(pdi) < pda_end)) {
/* do the actual plugging */
- hermes_aux_setaddr(hw, pdr_addr(pdr));
- hermes_write_bytes(hw, HERMES_AUXDATA,
- pdi->data, pdi_len(pdi));
+ hw->ops->program(hw, pdi->data, pdr_addr(pdr),
+ pdi_len(pdi));
}
}
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index e636924..6fbd788 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -177,9 +177,9 @@ int determine_fw_capabilities(struct orinoco_private *priv,
/* 3Com MAC : 00:50:DA:* */
memset(tmp, 0, sizeof(tmp));
/* Get the Symbol firmware version */
- err = hermes_read_ltv(hw, USER_BAP,
- HERMES_RID_SECONDARYVERSION_SYMBOL,
- SYMBOL_MAX_VER_LEN, NULL, &tmp);
+ err = hw->ops->read_ltv(hw, USER_BAP,
+ HERMES_RID_SECONDARYVERSION_SYMBOL,
+ SYMBOL_MAX_VER_LEN, NULL, &tmp);
if (err) {
dev_warn(dev, "Error %d reading Symbol firmware info. "
"Wildly guessing capabilities...\n", err);
@@ -262,6 +262,13 @@ int determine_fw_capabilities(struct orinoco_private *priv,
if (fw_name)
dev_info(dev, "Firmware determined as %s\n", fw_name);
+#ifndef CONFIG_HERMES_PRISM
+ if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
+ dev_err(dev, "Support for Prism chipset is not enabled\n");
+ return -ENODEV;
+ }
+#endif
+
return 0;
}
@@ -279,8 +286,8 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
u16 reclen;
/* Get the MAC address */
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- ETH_ALEN, NULL, dev_addr);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ ETH_ALEN, NULL, dev_addr);
if (err) {
dev_warn(dev, "Failed to read MAC address!\n");
goto out;
@@ -289,8 +296,8 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
dev_dbg(dev, "MAC address %pM\n", dev_addr);
/* Get the station name */
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- sizeof(nickbuf), &reclen, &nickbuf);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ sizeof(nickbuf), &reclen, &nickbuf);
if (err) {
dev_err(dev, "failed to read station name\n");
goto out;
@@ -367,6 +374,32 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
err = hermes_read_wordrec(hw, USER_BAP,
HERMES_RID_CNFPREAMBLE_SYMBOL,
&priv->preamble);
+ if (err) {
+ dev_err(dev, "Failed to read preamble setup\n");
+ goto out;
+ }
+ }
+
+ /* Retry settings */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
+ &priv->short_retry_limit);
+ if (err) {
+ dev_err(dev, "Failed to read short retry limit\n");
+ goto out;
+ }
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
+ &priv->long_retry_limit);
+ if (err) {
+ dev_err(dev, "Failed to read long retry limit\n");
+ goto out;
+ }
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
+ &priv->retry_lifetime);
+ if (err) {
+ dev_err(dev, "Failed to read max retry lifetime\n");
+ goto out;
}
out:
@@ -380,11 +413,11 @@ int orinoco_hw_allocate_fid(struct orinoco_private *priv)
struct hermes *hw = &priv->hw;
int err;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
/* Try workaround for old Symbol firmware bug */
priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
dev_warn(dev, "Firmware ALLOC bug detected "
"(old Symbol firmware?). Work around %s\n",
@@ -430,8 +463,9 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
struct hermes_idstring idbuf;
/* Set the MAC address */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+ err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN),
+ dev->dev_addr);
if (err) {
printk(KERN_ERR "%s: Error %d setting MAC address\n",
dev->name, err);
@@ -494,7 +528,7 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
/* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
&idbuf);
if (err) {
@@ -502,7 +536,7 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
dev->name, err);
return err;
}
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
&idbuf);
if (err) {
@@ -514,9 +548,9 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
/* Set the station name */
idbuf.len = cpu_to_le16(strlen(priv->nick));
memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
- &idbuf);
+ err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
if (err) {
printk(KERN_ERR "%s: Error %d setting nickname\n",
dev->name, err);
@@ -631,12 +665,12 @@ int orinoco_hw_program_rids(struct orinoco_private *priv)
if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
/* Enable monitor mode */
dev->type = ARPHRD_IEEE80211;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
HERMES_TEST_MONITOR, 0, NULL);
} else {
/* Disable monitor mode */
dev->type = ARPHRD_ETHER;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
HERMES_TEST_STOP, 0, NULL);
}
if (err)
@@ -662,8 +696,8 @@ int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
if ((key < 0) || (key >= 4))
return -EINVAL;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
- sizeof(tsc_arr), NULL, &tsc_arr);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
+ sizeof(tsc_arr), NULL, &tsc_arr);
if (!err)
memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
@@ -842,7 +876,7 @@ int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
memcpy(key, priv->keys[i].key,
priv->keys[i].key_len);
- err = hermes_write_ltv(hw, USER_BAP,
+ err = hw->ops->write_ltv(hw, USER_BAP,
HERMES_RID_CNFDEFAULTKEY0 + i,
HERMES_BYTES_TO_RECLEN(keylen),
key);
@@ -1049,17 +1083,17 @@ int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
* group address if either we want to multicast, or if we were
* multicasting and want to stop */
if (!promisc && (mc_count || priv->mc_count)) {
- struct dev_mc_list *p;
+ struct netdev_hw_addr *ha;
struct hermes_multicast mclist;
int i = 0;
- netdev_for_each_mc_addr(p, dev) {
+ netdev_for_each_mc_addr(ha, dev) {
if (i == mc_count)
break;
- memcpy(mclist.addr[i++], p->dmi_addr, ETH_ALEN);
+ memcpy(mclist.addr[i++], ha->addr, ETH_ALEN);
}
- err = hermes_write_ltv(hw, USER_BAP,
+ err = hw->ops->write_ltv(hw, USER_BAP,
HERMES_RID_CNFGROUPADDRESSES,
HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
&mclist);
@@ -1101,15 +1135,15 @@ int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
HERMES_RID_CNFDESIREDSSID;
- err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
- NULL, &essidbuf);
+ err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+ NULL, &essidbuf);
if (err)
goto fail_unlock;
} else {
*active = 0;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
- sizeof(essidbuf), NULL, &essidbuf);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+ sizeof(essidbuf), NULL, &essidbuf);
if (err)
goto fail_unlock;
}
@@ -1180,8 +1214,8 @@ int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
- sizeof(list), NULL, &list);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+ sizeof(list), NULL, &list);
orinoco_unlock(priv, &flags);
if (err)
@@ -1248,7 +1282,7 @@ int orinoco_hw_trigger_scan(struct orinoco_private *priv,
idbuf.len = cpu_to_le16(len);
memcpy(idbuf.val, ssid->ssid, len);
- err = hermes_write_ltv(hw, USER_BAP,
+ err = hw->ops->write_ltv(hw, USER_BAP,
HERMES_RID_CNFSCANSSID_AGERE,
HERMES_BYTES_TO_RECLEN(len + 2),
&idbuf);
@@ -1312,8 +1346,8 @@ int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
hermes_t *hw = &priv->hw;
int err;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, addr);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, addr);
return err;
}
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index 9799a1d..97af71e 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -22,7 +22,6 @@
/* Forward declarations */
struct orinoco_private;
-struct dev_addr_list;
int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name,
size_t fw_name_len, u32 *hw_ver);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 413e9ab..ca71f08 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -254,7 +254,7 @@ void set_port_type(struct orinoco_private *priv)
/* Device methods */
/********************************************************************/
-static int orinoco_open(struct net_device *dev)
+int orinoco_open(struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
@@ -272,8 +272,9 @@ static int orinoco_open(struct net_device *dev)
return err;
}
+EXPORT_SYMBOL(orinoco_open);
-static int orinoco_stop(struct net_device *dev)
+int orinoco_stop(struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
int err = 0;
@@ -281,25 +282,27 @@ static int orinoco_stop(struct net_device *dev)
/* We mustn't use orinoco_lock() here, because we need to be
able to close the interface even if hw_unavailable is set
(e.g. as we're released after a PC Card removal) */
- spin_lock_irq(&priv->lock);
+ orinoco_lock_irq(priv);
priv->open = 0;
err = __orinoco_down(priv);
- spin_unlock_irq(&priv->lock);
+ orinoco_unlock_irq(priv);
return err;
}
+EXPORT_SYMBOL(orinoco_stop);
-static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+struct net_device_stats *orinoco_get_stats(struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
return &priv->stats;
}
+EXPORT_SYMBOL(orinoco_get_stats);
-static void orinoco_set_multicast_list(struct net_device *dev)
+void orinoco_set_multicast_list(struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
unsigned long flags;
@@ -313,8 +316,9 @@ static void orinoco_set_multicast_list(struct net_device *dev)
__orinoco_set_multicast_list(dev);
orinoco_unlock(priv, &flags);
}
+EXPORT_SYMBOL(orinoco_set_multicast_list);
-static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+int orinoco_change_mtu(struct net_device *dev, int new_mtu)
{
struct orinoco_private *priv = ndev_priv(dev);
@@ -330,23 +334,115 @@ static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
return 0;
}
+EXPORT_SYMBOL(orinoco_change_mtu);
/********************************************************************/
/* Tx path */
/********************************************************************/
+/* Add encapsulation and MIC to the existing SKB.
+ * The main xmit routine will then send the whole lot to the card.
+ * Need 8 bytes headroom
+ * Need 8 bytes tailroom
+ *
+ * With encapsulated ethernet II frame
+ * --------
+ * 803.3 header (14 bytes)
+ * dst[6]
+ * -------- src[6]
+ * 803.3 header (14 bytes) len[2]
+ * dst[6] 803.2 header (8 bytes)
+ * src[6] encaps[6]
+ * len[2] <- leave alone -> len[2]
+ * -------- -------- <-- 0
+ * Payload Payload
+ * ... ...
+ *
+ * -------- --------
+ * MIC (8 bytes)
+ * --------
+ *
+ * returns 0 on success, -ENOMEM on error.
+ */
+int orinoco_process_xmit_skb(struct sk_buff *skb,
+ struct net_device *dev,
+ struct orinoco_private *priv,
+ int *tx_control,
+ u8 *mic_buf)
+{
+ struct orinoco_tkip_key *key;
+ struct ethhdr *eh;
+ int do_mic;
+
+ key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
+
+ do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
+ (key != NULL));
+
+ if (do_mic)
+ *tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
+ HERMES_TXCTRL_MIC;
+
+ eh = (struct ethhdr *)skb->data;
+
+ /* Encapsulate Ethernet-II frames */
+ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+ struct header_struct {
+ struct ethhdr eth; /* 802.3 header */
+ u8 encap[6]; /* 802.2 header */
+ } __attribute__ ((packed)) hdr;
+ int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN);
+
+ if (skb_headroom(skb) < ENCAPS_OVERHEAD) {
+ if (net_ratelimit())
+ printk(KERN_ERR
+ "%s: Not enough headroom for 802.2 headers %d\n",
+ dev->name, skb_headroom(skb));
+ return -ENOMEM;
+ }
+
+ /* Fill in new header */
+ memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
+ hdr.eth.h_proto = htons(len);
+ memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
+
+ /* Make room for the new header, and copy it in */
+ eh = (struct ethhdr *) skb_push(skb, ENCAPS_OVERHEAD);
+ memcpy(eh, &hdr, sizeof(hdr));
+ }
+
+ /* Calculate Michael MIC */
+ if (do_mic) {
+ size_t len = skb->len - ETH_HLEN;
+ u8 *mic = &mic_buf[0];
+
+ /* Have to write to an even address, so copy the spare
+ * byte across */
+ if (skb->len % 2) {
+ *mic = skb->data[skb->len - 1];
+ mic++;
+ }
+
+ orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
+ eh->h_dest, eh->h_source, 0 /* priority */,
+ skb->data + ETH_HLEN,
+ len, mic);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(orinoco_process_xmit_skb);
+
static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
- struct orinoco_tkip_key *key;
hermes_t *hw = &priv->hw;
int err = 0;
u16 txfid = priv->txfid;
- struct ethhdr *eh;
int tx_control;
unsigned long flags;
- int do_mic;
+ u8 mic_buf[MICHAEL_MIC_LEN+1];
if (!netif_running(dev)) {
printk(KERN_ERR "%s: Tx on stopped device!\n",
@@ -378,16 +474,12 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
if (skb->len < ETH_HLEN)
goto drop;
- key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
-
- do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
- (key != NULL));
-
tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
- if (do_mic)
- tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
- HERMES_TXCTRL_MIC;
+ err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
+ &mic_buf[0]);
+ if (err)
+ goto drop;
if (priv->has_alt_txcntl) {
/* WPA enabled firmwares have tx_cntl at the end of
@@ -400,8 +492,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
memset(&desc, 0, sizeof(desc));
*txcntl = cpu_to_le16(tx_control);
- err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
+ err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+ txfid, 0);
if (err) {
if (net_ratelimit())
printk(KERN_ERR "%s: Error %d writing Tx "
@@ -414,8 +506,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
memset(&desc, 0, sizeof(desc));
desc.tx_control = cpu_to_le16(tx_control);
- err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
+ err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
+ txfid, 0);
if (err) {
if (net_ratelimit())
printk(KERN_ERR "%s: Error %d writing Tx "
@@ -430,68 +522,24 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
}
- eh = (struct ethhdr *)skb->data;
-
- /* Encapsulate Ethernet-II frames */
- if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
- struct header_struct {
- struct ethhdr eth; /* 802.3 header */
- u8 encap[6]; /* 802.2 header */
- } __attribute__ ((packed)) hdr;
-
- /* Strip destination and source from the data */
- skb_pull(skb, 2 * ETH_ALEN);
-
- /* And move them to a separate header */
- memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
- hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len);
- memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
- /* Insert the SNAP header */
- if (skb_headroom(skb) < sizeof(hdr)) {
- printk(KERN_ERR
- "%s: Not enough headroom for 802.2 headers %d\n",
- dev->name, skb_headroom(skb));
- goto drop;
- }
- eh = (struct ethhdr *) skb_push(skb, sizeof(hdr));
- memcpy(eh, &hdr, sizeof(hdr));
- }
-
- err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len,
- txfid, HERMES_802_3_OFFSET);
+ err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len,
+ txfid, HERMES_802_3_OFFSET);
if (err) {
printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
dev->name, err);
goto busy;
}
- /* Calculate Michael MIC */
- if (do_mic) {
- u8 mic_buf[MICHAEL_MIC_LEN + 1];
- u8 *mic;
- size_t offset;
- size_t len;
+ if (tx_control & HERMES_TXCTRL_MIC) {
+ size_t offset = HERMES_802_3_OFFSET + skb->len;
+ size_t len = MICHAEL_MIC_LEN;
- if (skb->len % 2) {
- /* MIC start is on an odd boundary */
- mic_buf[0] = skb->data[skb->len - 1];
- mic = &mic_buf[1];
- offset = skb->len - 1;
- len = MICHAEL_MIC_LEN + 1;
- } else {
- mic = &mic_buf[0];
- offset = skb->len;
- len = MICHAEL_MIC_LEN;
+ if (offset % 2) {
+ offset--;
+ len++;
}
-
- orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
- eh->h_dest, eh->h_source, 0 /* priority */,
- skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic);
-
- /* Write the MIC */
- err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
- txfid, HERMES_802_3_OFFSET + offset);
+ err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
+ txfid, offset);
if (err) {
printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
dev->name, err);
@@ -502,7 +550,7 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
/* Finally, we actually initiate the send */
netif_stop_queue(dev);
- err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+ err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
txfid, NULL);
if (err) {
netif_start_queue(dev);
@@ -512,7 +560,6 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
goto busy;
}
- dev->trans_start = jiffies;
stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
goto ok;
@@ -572,9 +619,9 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
return; /* Nothing's really happened */
/* Read part of the frame header - we need status and addr1 */
- err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
- sizeof(struct hermes_txexc_data),
- fid, 0);
+ err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr,
+ sizeof(struct hermes_txexc_data),
+ fid, 0);
hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
stats->tx_errors++;
@@ -615,7 +662,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
netif_wake_queue(dev);
}
-static void orinoco_tx_timeout(struct net_device *dev)
+void orinoco_tx_timeout(struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
@@ -630,6 +677,7 @@ static void orinoco_tx_timeout(struct net_device *dev)
schedule_work(&priv->reset_work);
}
+EXPORT_SYMBOL(orinoco_tx_timeout);
/********************************************************************/
/* Rx path (data frames) */
@@ -764,9 +812,9 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
/* If any, copy the data from the card to the skb */
if (datalen > 0) {
- err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
- ALIGN(datalen, 2), rxfid,
- HERMES_802_2_OFFSET);
+ err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
+ ALIGN(datalen, 2), rxfid,
+ HERMES_802_2_OFFSET);
if (err) {
printk(KERN_ERR "%s: error %d reading monitor frame\n",
dev->name, err);
@@ -792,7 +840,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
stats->rx_dropped++;
}
-static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = ndev_priv(dev);
struct net_device_stats *stats = &priv->stats;
@@ -814,8 +862,8 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
rxfid = hermes_read_regn(hw, RXFID);
- err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
- rxfid, 0);
+ err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
+ rxfid, 0);
if (err) {
printk(KERN_ERR "%s: error %d reading Rx descriptor. "
"Frame dropped.\n", dev->name, err);
@@ -882,9 +930,9 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
nothing is removed. 2 is for aligning the IP header. */
skb_reserve(skb, ETH_HLEN + 2);
- err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
- ALIGN(length, 2), rxfid,
- HERMES_802_2_OFFSET);
+ err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+ ALIGN(length, 2), rxfid,
+ HERMES_802_2_OFFSET);
if (err) {
printk(KERN_ERR "%s: error %d reading frame. "
"Frame dropped.\n", dev->name, err);
@@ -913,6 +961,7 @@ update_stats:
out:
kfree(desc);
}
+EXPORT_SYMBOL(__orinoco_ev_rx);
static void orinoco_rx(struct net_device *dev,
struct hermes_rx_descriptor *desc,
@@ -1145,9 +1194,9 @@ static void orinoco_join_ap(struct work_struct *work)
goto out;
/* Read scan results from the firmware */
- err = hermes_read_ltv(hw, USER_BAP,
- HERMES_RID_SCANRESULTSTABLE,
- MAX_SCAN_LEN, &len, buf);
+ err = hw->ops->read_ltv(hw, USER_BAP,
+ HERMES_RID_SCANRESULTSTABLE,
+ MAX_SCAN_LEN, &len, buf);
if (err) {
printk(KERN_ERR "%s: Cannot read scan results\n",
dev->name);
@@ -1194,8 +1243,8 @@ static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
union iwreq_data wrqu;
int err;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
if (err != 0)
return;
@@ -1217,8 +1266,8 @@ static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
if (!priv->has_wpa)
return;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
- sizeof(buf), NULL, &buf);
+ err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
+ sizeof(buf), NULL, &buf);
if (err != 0)
return;
@@ -1247,8 +1296,9 @@ static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
if (!priv->has_wpa)
return;
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO,
- sizeof(buf), NULL, &buf);
+ err = hw->ops->read_ltv(hw, USER_BAP,
+ HERMES_RID_CURRENT_ASSOC_RESP_INFO,
+ sizeof(buf), NULL, &buf);
if (err != 0)
return;
@@ -1353,7 +1403,7 @@ static void orinoco_process_scan_results(struct work_struct *work)
spin_unlock_irqrestore(&priv->scan_lock, flags);
}
-static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = ndev_priv(dev);
u16 infofid;
@@ -1371,8 +1421,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
infofid = hermes_read_regn(hw, INFOFID);
/* Read the info frame header - don't try too hard */
- err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
- infofid, 0);
+ err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info),
+ infofid, 0);
if (err) {
printk(KERN_ERR "%s: error %d reading info frame. "
"Frame dropped.\n", dev->name, err);
@@ -1393,8 +1443,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
len = sizeof(tallies);
}
- err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len,
- infofid, sizeof(info));
+ err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len,
+ infofid, sizeof(info));
if (err)
break;
@@ -1429,8 +1479,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
break;
}
- err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len,
- infofid, sizeof(info));
+ err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len,
+ infofid, sizeof(info));
if (err)
break;
newstatus = le16_to_cpu(linkstatus.linkstatus);
@@ -1494,8 +1544,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
}
/* Read scan data */
- err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
- infofid, sizeof(info));
+ err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len,
+ infofid, sizeof(info));
if (err) {
kfree(buf);
qabort_scan(priv);
@@ -1547,8 +1597,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
break;
/* Read scan data */
- err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len,
- infofid, sizeof(info));
+ err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len,
+ infofid, sizeof(info));
if (err)
kfree(bss);
else
@@ -1568,9 +1618,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
/* We don't actually do anything about it */
break;
}
-
- return;
}
+EXPORT_SYMBOL(__orinoco_ev_info);
static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
{
@@ -1647,7 +1696,7 @@ static int orinoco_reinit_firmware(struct orinoco_private *priv)
struct hermes *hw = &priv->hw;
int err;
- err = hermes_init(hw);
+ err = hw->ops->init(hw);
if (priv->do_fw_download && !err) {
err = orinoco_download(priv);
if (err)
@@ -1735,7 +1784,7 @@ void orinoco_reset(struct work_struct *work)
}
/* This has to be called from user context */
- spin_lock_irq(&priv->lock);
+ orinoco_lock_irq(priv);
priv->hw_unavailable--;
@@ -1750,7 +1799,7 @@ void orinoco_reset(struct work_struct *work)
dev->trans_start = jiffies;
}
- spin_unlock_irq(&priv->lock);
+ orinoco_unlock_irq(priv);
return;
disable:
@@ -1984,7 +2033,7 @@ int orinoco_init(struct orinoco_private *priv)
priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
/* Initialize the firmware */
- err = hermes_init(hw);
+ err = hw->ops->init(hw);
if (err != 0) {
dev_err(dev, "Failed to initialize firmware (err = %d)\n",
err);
@@ -2067,9 +2116,9 @@ int orinoco_init(struct orinoco_private *priv)
/* Make the hardware available, as long as it hasn't been
* removed elsewhere (e.g. by PCMCIA hot unplug) */
- spin_lock_irq(&priv->lock);
+ orinoco_lock_irq(priv);
priv->hw_unavailable--;
- spin_unlock_irq(&priv->lock);
+ orinoco_unlock_irq(priv);
dev_dbg(dev, "Ready\n");
@@ -2192,7 +2241,8 @@ EXPORT_SYMBOL(alloc_orinocodev);
*/
int orinoco_if_add(struct orinoco_private *priv,
unsigned long base_addr,
- unsigned int irq)
+ unsigned int irq,
+ const struct net_device_ops *ops)
{
struct wiphy *wiphy = priv_to_wiphy(priv);
struct wireless_dev *wdev;
@@ -2211,16 +2261,21 @@ int orinoco_if_add(struct orinoco_private *priv,
/* Setup / override net_device fields */
dev->ieee80211_ptr = wdev;
- dev->netdev_ops = &orinoco_netdev_ops;
dev->watchdog_timeo = HZ; /* 1 second timeout */
dev->wireless_handlers = &orinoco_handler_def;
#ifdef WIRELESS_SPY
dev->wireless_data = &priv->wireless_data;
#endif
+ /* Default to standard ops if not set */
+ if (ops)
+ dev->netdev_ops = ops;
+ else
+ dev->netdev_ops = &orinoco_netdev_ops;
+
/* we use the default eth_mac_addr for setting the MAC addr */
/* Reserve space in skb for the SNAP header */
- dev->hard_header_len += ENCAPS_OVERHEAD;
+ dev->needed_headroom = ENCAPS_OVERHEAD;
netif_carrier_off(dev);
@@ -2305,7 +2360,7 @@ int orinoco_up(struct orinoco_private *priv)
unsigned long flags;
int err;
- spin_lock_irqsave(&priv->lock, flags);
+ priv->hw.ops->lock_irqsave(&priv->lock, &flags);
err = orinoco_reinit_firmware(priv);
if (err) {
@@ -2325,7 +2380,7 @@ int orinoco_up(struct orinoco_private *priv)
}
exit:
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
return 0;
}
@@ -2337,7 +2392,7 @@ void orinoco_down(struct orinoco_private *priv)
unsigned long flags;
int err;
- spin_lock_irqsave(&priv->lock, flags);
+ priv->hw.ops->lock_irqsave(&priv->lock, &flags);
err = __orinoco_down(priv);
if (err)
printk(KERN_WARNING "%s: Error %d downing interface\n",
@@ -2345,7 +2400,7 @@ void orinoco_down(struct orinoco_private *priv)
netif_device_detach(dev);
priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
}
EXPORT_SYMBOL(orinoco_down);
diff --git a/drivers/net/wireless/orinoco/main.h b/drivers/net/wireless/orinoco/main.h
index 21ab36c..4dadf98 100644
--- a/drivers/net/wireless/orinoco/main.h
+++ b/drivers/net/wireless/orinoco/main.h
@@ -33,18 +33,6 @@ int orinoco_commit(struct orinoco_private *priv);
void orinoco_reset(struct work_struct *work);
/* Information element helpers - find a home for these... */
-static inline u8 *orinoco_get_ie(u8 *data, size_t len,
- enum ieee80211_eid eid)
-{
- u8 *p = data;
- while ((p + 2) < (data + len)) {
- if (p[0] == eid)
- return p;
- p += p[1] + 2;
- }
- return NULL;
-}
-
#define WPA_OUI_TYPE "\x00\x50\xF2\x01"
#define WPA_SELECTOR_LEN 4
static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 665ef56..a6da86e 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -131,6 +131,8 @@ struct orinoco_private {
u16 ap_density, rts_thresh;
u16 pm_on, pm_mcast, pm_period, pm_timeout;
u16 preamble;
+ u16 short_retry_limit, long_retry_limit;
+ u16 retry_lifetime;
#ifdef WIRELESS_SPY
struct iw_spy_data spy_data; /* iwspy support */
struct iw_public_data wireless_data;
@@ -188,12 +190,30 @@ extern void free_orinocodev(struct orinoco_private *priv);
extern int orinoco_init(struct orinoco_private *priv);
extern int orinoco_if_add(struct orinoco_private *priv,
unsigned long base_addr,
- unsigned int irq);
+ unsigned int irq,
+ const struct net_device_ops *ops);
extern void orinoco_if_del(struct orinoco_private *priv);
extern int orinoco_up(struct orinoco_private *priv);
extern void orinoco_down(struct orinoco_private *priv);
extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
+extern void __orinoco_ev_info(struct net_device *dev, hermes_t *hw);
+extern void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw);
+
+int orinoco_process_xmit_skb(struct sk_buff *skb,
+ struct net_device *dev,
+ struct orinoco_private *priv,
+ int *tx_control,
+ u8 *mic);
+
+/* Common ndo functions exported for reuse by orinoco_usb */
+int orinoco_open(struct net_device *dev);
+int orinoco_stop(struct net_device *dev);
+struct net_device_stats *orinoco_get_stats(struct net_device *dev);
+void orinoco_set_multicast_list(struct net_device *dev);
+int orinoco_change_mtu(struct net_device *dev, int new_mtu);
+void orinoco_tx_timeout(struct net_device *dev);
+
/********************************************************************/
/* Locking and synchronization functions */
/********************************************************************/
@@ -201,11 +221,11 @@ extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
static inline int orinoco_lock(struct orinoco_private *priv,
unsigned long *flags)
{
- spin_lock_irqsave(&priv->lock, *flags);
+ priv->hw.ops->lock_irqsave(&priv->lock, flags);
if (priv->hw_unavailable) {
DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
priv->ndev);
- spin_unlock_irqrestore(&priv->lock, *flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
return -EBUSY;
}
return 0;
@@ -214,7 +234,17 @@ static inline int orinoco_lock(struct orinoco_private *priv,
static inline void orinoco_unlock(struct orinoco_private *priv,
unsigned long *flags)
{
- spin_unlock_irqrestore(&priv->lock, *flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
+}
+
+static inline void orinoco_lock_irq(struct orinoco_private *priv)
+{
+ priv->hw.ops->lock_irq(&priv->lock);
+}
+
+static inline void orinoco_unlock_irq(struct orinoco_private *priv)
+{
+ priv->hw.ops->unlock_irq(&priv->lock);
}
/*** Navigate from net_device to orinoco_private ***/
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 03056ab..b16d5db 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -281,7 +281,7 @@ orinoco_cs_config(struct pcmcia_device *link)
/* Register an interface with the stack */
if (orinoco_if_add(priv, link->io.BasePort1,
- link->irq) != 0) {
+ link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
@@ -306,9 +306,9 @@ orinoco_cs_release(struct pcmcia_device *link)
/* We're committed to taking the device away now, so mark the
* hardware as unavailable */
- spin_lock_irqsave(&priv->lock, flags);
+ priv->hw.ops->lock_irqsave(&priv->lock, &flags);
priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
pcmcia_disable_device(link);
if (priv->hw.iobase)
@@ -353,87 +353,90 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
"Pavel Roskin <proski@gnu.org>, et al)";
static struct pcmcia_device_id orinoco_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
- PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
- PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
- PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
- PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+ PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+ PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+ PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+ PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+ PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+ PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+ PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+ PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
+ PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+ PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+ PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+ PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
+ PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
+ PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
+ PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
+ PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+ PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+ PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
+ PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+ PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+ PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+#ifdef CONFIG_HERMES_PRISM
+ /* Only entries that certainly identify Prism chipset */
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+ PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+ PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
- PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
- PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+ PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
- PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
- PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
- PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
- PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
- PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
- PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+ PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
+ PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
- PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
- PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
- PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
- PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
- PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+ PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
- PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
- PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
- PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
- PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
- PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
- PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
- PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
- PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
- PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
+#endif
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c
index 075f446..bc3ea0b 100644
--- a/drivers/net/wireless/orinoco/orinoco_nortel.c
+++ b/drivers/net/wireless/orinoco/orinoco_nortel.c
@@ -220,7 +220,7 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev,
goto fail;
}
- err = orinoco_if_add(priv, 0, 0);
+ err = orinoco_if_add(priv, 0, 0, NULL);
if (err) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index bda5317..468197f 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -170,7 +170,7 @@ static int orinoco_pci_init_one(struct pci_dev *pdev,
goto fail;
}
- err = orinoco_if_add(priv, 0, 0);
+ err = orinoco_if_add(priv, 0, 0, NULL);
if (err) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index e0d5874..9358f4d 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -259,7 +259,7 @@ static int orinoco_plx_init_one(struct pci_dev *pdev,
goto fail;
}
- err = orinoco_if_add(priv, 0, 0);
+ err = orinoco_if_add(priv, 0, 0, NULL);
if (err) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index 88cbc79..784605f 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -156,7 +156,7 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev,
goto fail;
}
- err = orinoco_if_add(priv, 0, 0);
+ err = orinoco_if_add(priv, 0, 0, NULL);
if (err) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto fail;
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
new file mode 100644
index 0000000..78f089b
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -0,0 +1,1795 @@
+/*
+ * USB Orinoco driver
+ *
+ * Copyright (c) 2003 Manuel Estrada Sainz
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * Queueing code based on linux-wlan-ng 0.2.1-pre5
+ *
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * The license is the same as above.
+ *
+ * Initialy based on USB Skeleton driver - 0.7
+ *
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * NOTE: The original USB Skeleton driver is GPL, but all that code is
+ * gone so MPL/GPL applies.
+ */
+
+#define DRIVER_NAME "orinoco_usb"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+
+#include "mic.h"
+#include "orinoco.h"
+
+#ifndef URB_ASYNC_UNLINK
+#define URB_ASYNC_UNLINK 0
+#endif
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+
+struct header_struct {
+ /* 802.3 */
+ u8 dest[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ __be16 len;
+ /* 802.2 */
+ u8 dsap;
+ u8 ssap;
+ u8 ctrl;
+ /* SNAP */
+ u8 oui[3];
+ __be16 ethertype;
+} __attribute__ ((packed));
+
+struct ez_usb_fw {
+ u16 size;
+ const u8 *code;
+};
+
+static struct ez_usb_fw firmware = {
+ .size = 0,
+ .code = NULL,
+};
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* Debugging macros */
+#undef dbg
+#define dbg(format, arg...) \
+ do { if (debug) printk(KERN_DEBUG PFX "%s: " format "\n", \
+ __func__ , ## arg); } while (0)
+#undef err
+#define err(format, arg...) \
+ do { printk(KERN_ERR PFX format "\n", ## arg); } while (0)
+
+/* Module paramaters */
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+MODULE_FIRMWARE("orinoco_ezusb_fw");
+
+/*
+ * Under some conditions, the card gets stuck and stops paying attention
+ * to the world (i.e. data communication stalls) until we do something to
+ * it. Sending an INQ_TALLIES command seems to be enough and should be
+ * harmless otherwise. This behaviour has been observed when using the
+ * driver on a systemimager client during installation. In the past a
+ * timer was used to send INQ_TALLIES commands when there was no other
+ * activity, but it was troublesome and was removed.
+ */
+
+#define USB_COMPAQ_VENDOR_ID 0x049f /* Compaq Computer Corp. */
+#define USB_COMPAQ_WL215_ID 0x001f /* Compaq WL215 USB Adapter */
+#define USB_COMPAQ_W200_ID 0x0076 /* Compaq W200 USB Adapter */
+#define USB_HP_WL215_ID 0x0082 /* Compaq WL215 USB Adapter */
+
+#define USB_MELCO_VENDOR_ID 0x0411
+#define USB_BUFFALO_L11_ID 0x0006 /* BUFFALO WLI-USB-L11 */
+#define USB_BUFFALO_L11G_WR_ID 0x000B /* BUFFALO WLI-USB-L11G-WR */
+#define USB_BUFFALO_L11G_ID 0x000D /* BUFFALO WLI-USB-L11G */
+
+#define USB_LUCENT_VENDOR_ID 0x047E /* Lucent Technologies */
+#define USB_LUCENT_ORINOCO_ID 0x0300 /* Lucent/Agere Orinoco USB Client */
+
+#define USB_AVAYA8_VENDOR_ID 0x0D98
+#define USB_AVAYAE_VENDOR_ID 0x0D9E
+#define USB_AVAYA_WIRELESS_ID 0x0300 /* Avaya Wireless USB Card */
+
+#define USB_AGERE_VENDOR_ID 0x0D4E /* Agere Systems */
+#define USB_AGERE_MODEL0801_ID 0x1000 /* Wireless USB Card Model 0801 */
+#define USB_AGERE_MODEL0802_ID 0x1001 /* Wireless USB Card Model 0802 */
+#define USB_AGERE_REBRANDED_ID 0x047A /* WLAN USB Card */
+
+#define USB_ELSA_VENDOR_ID 0x05CC
+#define USB_ELSA_AIRLANCER_ID 0x3100 /* ELSA AirLancer USB-11 */
+
+#define USB_LEGEND_VENDOR_ID 0x0E7C
+#define USB_LEGEND_JOYNET_ID 0x0300 /* Joynet WLAN USB Card */
+
+#define USB_SAMSUNG_VENDOR_ID 0x04E8
+#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */
+#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */
+#define USB_SAMSUNG_SEW2003U_ID 0x7011 /* Samsung SEW-2003U Card */
+
+#define USB_IGATE_VENDOR_ID 0x0681
+#define USB_IGATE_IGATE_11M_ID 0x0012 /* I-GATE 11M USB Card */
+
+#define USB_FUJITSU_VENDOR_ID 0x0BF8
+#define USB_FUJITSU_E1100_ID 0x1002 /* connect2AIR WLAN E-1100 USB */
+
+#define USB_2WIRE_VENDOR_ID 0x1630
+#define USB_2WIRE_WIRELESS_ID 0xff81 /* 2Wire Wireless USB adapter */
+
+
+#define EZUSB_REQUEST_FW_TRANS 0xA0
+#define EZUSB_REQUEST_TRIGER 0xAA
+#define EZUSB_REQUEST_TRIG_AC 0xAC
+#define EZUSB_CPUCS_REG 0x7F92
+
+#define EZUSB_RID_TX 0x0700
+#define EZUSB_RID_RX 0x0701
+#define EZUSB_RID_INIT1 0x0702
+#define EZUSB_RID_ACK 0x0710
+#define EZUSB_RID_READ_PDA 0x0800
+#define EZUSB_RID_PROG_INIT 0x0852
+#define EZUSB_RID_PROG_SET_ADDR 0x0853
+#define EZUSB_RID_PROG_BYTES 0x0854
+#define EZUSB_RID_PROG_END 0x0855
+#define EZUSB_RID_DOCMD 0x0860
+
+/* Recognize info frames */
+#define EZUSB_IS_INFO(id) ((id >= 0xF000) && (id <= 0xF2FF))
+
+#define EZUSB_MAGIC 0x0210
+
+#define EZUSB_FRAME_DATA 1
+#define EZUSB_FRAME_CONTROL 2
+
+#define DEF_TIMEOUT (3*HZ)
+
+#define BULK_BUF_SIZE 2048
+
+#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet))
+
+#define FW_BUF_SIZE 64
+#define FW_VAR_OFFSET_PTR 0x359
+#define FW_VAR_VALUE 0
+#define FW_HOLE_START 0x100
+#define FW_HOLE_END 0x300
+
+struct ezusb_packet {
+ __le16 magic; /* 0x0210 */
+ u8 req_reply_count;
+ u8 ans_reply_count;
+ __le16 frame_type; /* 0x01 for data frames, 0x02 otherwise */
+ __le16 size; /* transport size */
+ __le16 crc; /* CRC up to here */
+ __le16 hermes_len;
+ __le16 hermes_rid;
+ u8 data[0];
+} __attribute__ ((packed));
+
+/* Table of devices that work or may work with this driver */
+static struct usb_device_id ezusb_table[] = {
+ {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)},
+ {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)},
+ {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)},
+ {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)},
+ {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)},
+ {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)},
+ {USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)},
+ {USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
+ {USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
+ {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)},
+ {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)},
+ {USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)},
+ {USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)},
+ {USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID,
+ 0, 0)},
+ {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)},
+ {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)},
+ {USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)},
+ {USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)},
+ {USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)},
+ {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ezusb_table);
+
+/* Structure to hold all of our device specific stuff */
+struct ezusb_priv {
+ struct usb_device *udev;
+ struct net_device *dev;
+ struct mutex mtx;
+ spinlock_t req_lock;
+ struct list_head req_pending;
+ struct list_head req_active;
+ spinlock_t reply_count_lock;
+ u16 hermes_reg_fake[0x40];
+ u8 *bap_buf;
+ struct urb *read_urb;
+ int read_pipe;
+ int write_pipe;
+ u8 reply_count;
+};
+
+enum ezusb_state {
+ EZUSB_CTX_START,
+ EZUSB_CTX_QUEUED,
+ EZUSB_CTX_REQ_SUBMITTED,
+ EZUSB_CTX_REQ_COMPLETE,
+ EZUSB_CTX_RESP_RECEIVED,
+ EZUSB_CTX_REQ_TIMEOUT,
+ EZUSB_CTX_REQ_FAILED,
+ EZUSB_CTX_RESP_TIMEOUT,
+ EZUSB_CTX_REQSUBMIT_FAIL,
+ EZUSB_CTX_COMPLETE,
+};
+
+struct request_context {
+ struct list_head list;
+ atomic_t refcount;
+ struct completion done; /* Signals that CTX is dead */
+ int killed;
+ struct urb *outurb; /* OUT for req pkt */
+ struct ezusb_priv *upriv;
+ struct ezusb_packet *buf;
+ int buf_length;
+ struct timer_list timer; /* Timeout handling */
+ enum ezusb_state state; /* Current state */
+ /* the RID that we will wait for */
+ u16 out_rid;
+ u16 in_rid;
+};
+
+
+/* Forward declarations */
+static void ezusb_ctx_complete(struct request_context *ctx);
+static void ezusb_req_queue_run(struct ezusb_priv *upriv);
+static void ezusb_bulk_in_callback(struct urb *urb);
+
+static inline u8 ezusb_reply_inc(u8 count)
+{
+ if (count < 0x7F)
+ return count + 1;
+ else
+ return 1;
+}
+
+static void ezusb_request_context_put(struct request_context *ctx)
+{
+ if (!atomic_dec_and_test(&ctx->refcount))
+ return;
+
+ WARN_ON(!ctx->done.done);
+ BUG_ON(ctx->outurb->status == -EINPROGRESS);
+ BUG_ON(timer_pending(&ctx->timer));
+ usb_free_urb(ctx->outurb);
+ kfree(ctx->buf);
+ kfree(ctx);
+}
+
+static inline void ezusb_mod_timer(struct ezusb_priv *upriv,
+ struct timer_list *timer,
+ unsigned long expire)
+{
+ if (!upriv->udev)
+ return;
+ mod_timer(timer, expire);
+}
+
+static void ezusb_request_timerfn(u_long _ctx)
+{
+ struct request_context *ctx = (void *) _ctx;
+
+ ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+ if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) {
+ ctx->state = EZUSB_CTX_REQ_TIMEOUT;
+ } else {
+ ctx->state = EZUSB_CTX_RESP_TIMEOUT;
+ dbg("couldn't unlink");
+ atomic_inc(&ctx->refcount);
+ ctx->killed = 1;
+ ezusb_ctx_complete(ctx);
+ ezusb_request_context_put(ctx);
+ }
+};
+
+static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv,
+ u16 out_rid, u16 in_rid)
+{
+ struct request_context *ctx;
+
+ ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC);
+ if (!ctx)
+ return NULL;
+
+ memset(ctx, 0, sizeof(*ctx));
+
+ ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC);
+ if (!ctx->buf) {
+ kfree(ctx);
+ return NULL;
+ }
+ ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!ctx->outurb) {
+ kfree(ctx->buf);
+ kfree(ctx);
+ return NULL;
+ }
+
+ ctx->upriv = upriv;
+ ctx->state = EZUSB_CTX_START;
+ ctx->out_rid = out_rid;
+ ctx->in_rid = in_rid;
+
+ atomic_set(&ctx->refcount, 1);
+ init_completion(&ctx->done);
+
+ init_timer(&ctx->timer);
+ ctx->timer.function = ezusb_request_timerfn;
+ ctx->timer.data = (u_long) ctx;
+ return ctx;
+}
+
+
+/* Hopefully the real complete_all will soon be exported, in the mean
+ * while this should work. */
+static inline void ezusb_complete_all(struct completion *comp)
+{
+ complete(comp);
+ complete(comp);
+ complete(comp);
+ complete(comp);
+}
+
+static void ezusb_ctx_complete(struct request_context *ctx)
+{
+ struct ezusb_priv *upriv = ctx->upriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&upriv->req_lock, flags);
+
+ list_del_init(&ctx->list);
+ if (upriv->udev) {
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ ezusb_req_queue_run(upriv);
+ spin_lock_irqsave(&upriv->req_lock, flags);
+ }
+
+ switch (ctx->state) {
+ case EZUSB_CTX_COMPLETE:
+ case EZUSB_CTX_REQSUBMIT_FAIL:
+ case EZUSB_CTX_REQ_FAILED:
+ case EZUSB_CTX_REQ_TIMEOUT:
+ case EZUSB_CTX_RESP_TIMEOUT:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) {
+ struct net_device *dev = upriv->dev;
+ struct orinoco_private *priv = ndev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+
+ if (ctx->state != EZUSB_CTX_COMPLETE)
+ stats->tx_errors++;
+ else
+ stats->tx_packets++;
+
+ netif_wake_queue(dev);
+ }
+ ezusb_complete_all(&ctx->done);
+ ezusb_request_context_put(ctx);
+ break;
+
+ default:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ if (!upriv->udev) {
+ /* This is normal, as all request contexts get flushed
+ * when the device is disconnected */
+ err("Called, CTX not terminating, but device gone");
+ ezusb_complete_all(&ctx->done);
+ ezusb_request_context_put(ctx);
+ break;
+ }
+
+ err("Called, CTX not in terminating state.");
+ /* Things are really bad if this happens. Just leak
+ * the CTX because it may still be linked to the
+ * queue or the OUT urb may still be active.
+ * Just leaking at least prevents an Oops or Panic.
+ */
+ break;
+ }
+}
+
+/**
+ * ezusb_req_queue_run:
+ * Description:
+ * Note: Only one active CTX at any one time, because there's no
+ * other (reliable) way to match the response URB to the correct
+ * CTX.
+ **/
+static void ezusb_req_queue_run(struct ezusb_priv *upriv)
+{
+ unsigned long flags;
+ struct request_context *ctx;
+ int result;
+
+ spin_lock_irqsave(&upriv->req_lock, flags);
+
+ if (!list_empty(&upriv->req_active))
+ goto unlock;
+
+ if (list_empty(&upriv->req_pending))
+ goto unlock;
+
+ ctx =
+ list_entry(upriv->req_pending.next, struct request_context,
+ list);
+
+ if (!ctx->upriv->udev)
+ goto unlock;
+
+ /* We need to split this off to avoid a race condition */
+ list_move_tail(&ctx->list, &upriv->req_active);
+
+ if (ctx->state == EZUSB_CTX_QUEUED) {
+ atomic_inc(&ctx->refcount);
+ result = usb_submit_urb(ctx->outurb, GFP_ATOMIC);
+ if (result) {
+ ctx->state = EZUSB_CTX_REQSUBMIT_FAIL;
+
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ err("Fatal, failed to submit command urb."
+ " error=%d\n", result);
+
+ ezusb_ctx_complete(ctx);
+ ezusb_request_context_put(ctx);
+ goto done;
+ }
+
+ ctx->state = EZUSB_CTX_REQ_SUBMITTED;
+ ezusb_mod_timer(ctx->upriv, &ctx->timer,
+ jiffies + DEF_TIMEOUT);
+ }
+
+ unlock:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ done:
+ return;
+}
+
+static void ezusb_req_enqueue_run(struct ezusb_priv *upriv,
+ struct request_context *ctx)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&upriv->req_lock, flags);
+
+ if (!ctx->upriv->udev) {
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ goto done;
+ }
+ atomic_inc(&ctx->refcount);
+ list_add_tail(&ctx->list, &upriv->req_pending);
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ ctx->state = EZUSB_CTX_QUEUED;
+ ezusb_req_queue_run(upriv);
+
+ done:
+ return;
+}
+
+static void ezusb_request_out_callback(struct urb *urb)
+{
+ unsigned long flags;
+ enum ezusb_state state;
+ struct request_context *ctx = urb->context;
+ struct ezusb_priv *upriv = ctx->upriv;
+
+ spin_lock_irqsave(&upriv->req_lock, flags);
+
+ del_timer(&ctx->timer);
+
+ if (ctx->killed) {
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ pr_warning("interrupt called with dead ctx");
+ goto out;
+ }
+
+ state = ctx->state;
+
+ if (urb->status == 0) {
+ switch (state) {
+ case EZUSB_CTX_REQ_SUBMITTED:
+ if (ctx->in_rid) {
+ ctx->state = EZUSB_CTX_REQ_COMPLETE;
+ /* reply URB still pending */
+ ezusb_mod_timer(upriv, &ctx->timer,
+ jiffies + DEF_TIMEOUT);
+ spin_unlock_irqrestore(&upriv->req_lock,
+ flags);
+ break;
+ }
+ /* fall through */
+ case EZUSB_CTX_RESP_RECEIVED:
+ /* IN already received before this OUT-ACK */
+ ctx->state = EZUSB_CTX_COMPLETE;
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ ezusb_ctx_complete(ctx);
+ break;
+
+ default:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ err("Unexpected state(0x%x, %d) in OUT URB",
+ state, urb->status);
+ break;
+ }
+ } else {
+ /* If someone cancels the OUT URB then its status
+ * should be either -ECONNRESET or -ENOENT.
+ */
+ switch (state) {
+ case EZUSB_CTX_REQ_SUBMITTED:
+ case EZUSB_CTX_RESP_RECEIVED:
+ ctx->state = EZUSB_CTX_REQ_FAILED;
+ /* fall through */
+
+ case EZUSB_CTX_REQ_FAILED:
+ case EZUSB_CTX_REQ_TIMEOUT:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ ezusb_ctx_complete(ctx);
+ break;
+
+ default:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ err("Unexpected state(0x%x, %d) in OUT URB",
+ state, urb->status);
+ break;
+ }
+ }
+ out:
+ ezusb_request_context_put(ctx);
+}
+
+static void ezusb_request_in_callback(struct ezusb_priv *upriv,
+ struct urb *urb)
+{
+ struct ezusb_packet *ans = urb->transfer_buffer;
+ struct request_context *ctx = NULL;
+ enum ezusb_state state;
+ unsigned long flags;
+
+ /* Find the CTX on the active queue that requested this URB */
+ spin_lock_irqsave(&upriv->req_lock, flags);
+ if (upriv->udev) {
+ struct list_head *item;
+
+ list_for_each(item, &upriv->req_active) {
+ struct request_context *c;
+ int reply_count;
+
+ c = list_entry(item, struct request_context, list);
+ reply_count =
+ ezusb_reply_inc(c->buf->req_reply_count);
+ if ((ans->ans_reply_count == reply_count)
+ && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) {
+ ctx = c;
+ break;
+ }
+ dbg("Skipped (0x%x/0x%x) (%d/%d)",
+ le16_to_cpu(ans->hermes_rid),
+ c->in_rid, ans->ans_reply_count, reply_count);
+ }
+ }
+
+ if (ctx == NULL) {
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ err("%s: got unexpected RID: 0x%04X", __func__,
+ le16_to_cpu(ans->hermes_rid));
+ ezusb_req_queue_run(upriv);
+ return;
+ }
+
+ /* The data we want is in the in buffer, exchange */
+ urb->transfer_buffer = ctx->buf;
+ ctx->buf = (void *) ans;
+ ctx->buf_length = urb->actual_length;
+
+ state = ctx->state;
+ switch (state) {
+ case EZUSB_CTX_REQ_SUBMITTED:
+ /* We have received our response URB before
+ * our request has been acknowledged. Do NOT
+ * destroy our CTX yet, because our OUT URB
+ * is still alive ...
+ */
+ ctx->state = EZUSB_CTX_RESP_RECEIVED;
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ /* Let the machine continue running. */
+ break;
+
+ case EZUSB_CTX_REQ_COMPLETE:
+ /* This is the usual path: our request
+ * has already been acknowledged, and
+ * we have now received the reply.
+ */
+ ctx->state = EZUSB_CTX_COMPLETE;
+
+ /* Stop the intimer */
+ del_timer(&ctx->timer);
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ /* Call the completion handler */
+ ezusb_ctx_complete(ctx);
+ break;
+
+ default:
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ pr_warning("Matched IN URB, unexpected context state(0x%x)",
+ state);
+ /* Throw this CTX away and try submitting another */
+ del_timer(&ctx->timer);
+ ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+ usb_unlink_urb(ctx->outurb);
+ ezusb_req_queue_run(upriv);
+ break;
+ } /* switch */
+}
+
+
+static void ezusb_req_ctx_wait(struct ezusb_priv *upriv,
+ struct request_context *ctx)
+{
+ switch (ctx->state) {
+ case EZUSB_CTX_QUEUED:
+ case EZUSB_CTX_REQ_SUBMITTED:
+ case EZUSB_CTX_REQ_COMPLETE:
+ case EZUSB_CTX_RESP_RECEIVED:
+ if (in_softirq()) {
+ /* If we get called from a timer, timeout timers don't
+ * get the chance to run themselves. So we make sure
+ * that we don't sleep for ever */
+ int msecs = DEF_TIMEOUT * (1000 / HZ);
+ while (!ctx->done.done && msecs--)
+ udelay(1000);
+ } else {
+ wait_event_interruptible(ctx->done.wait,
+ ctx->done.done);
+ }
+ break;
+ default:
+ /* Done or failed - nothing to wait for */
+ break;
+ }
+}
+
+static inline u16 build_crc(struct ezusb_packet *data)
+{
+ u16 crc = 0;
+ u8 *bytes = (u8 *)data;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ crc = (crc << 1) + bytes[i];
+
+ return crc;
+}
+
+/**
+ * ezusb_fill_req:
+ *
+ * if data == NULL and length > 0 the data is assumed to be already in
+ * the target buffer and only the header is filled.
+ *
+ */
+static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid,
+ const void *data, u16 frame_type, u8 reply_count)
+{
+ int total_size = sizeof(*req) + length;
+
+ BUG_ON(total_size > BULK_BUF_SIZE);
+
+ req->magic = cpu_to_le16(EZUSB_MAGIC);
+ req->req_reply_count = reply_count;
+ req->ans_reply_count = 0;
+ req->frame_type = cpu_to_le16(frame_type);
+ req->size = cpu_to_le16(length + 4);
+ req->crc = cpu_to_le16(build_crc(req));
+ req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length));
+ req->hermes_rid = cpu_to_le16(rid);
+ if (data)
+ memcpy(req->data, data, length);
+ return total_size;
+}
+
+static int ezusb_submit_in_urb(struct ezusb_priv *upriv)
+{
+ int retval = 0;
+ void *cur_buf = upriv->read_urb->transfer_buffer;
+
+ if (upriv->read_urb->status == -EINPROGRESS) {
+ dbg("urb busy, not resubmiting");
+ retval = -EBUSY;
+ goto exit;
+ }
+ usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe,
+ cur_buf, BULK_BUF_SIZE,
+ ezusb_bulk_in_callback, upriv);
+ upriv->read_urb->transfer_flags = 0;
+ retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC);
+ if (retval)
+ err("%s submit failed %d", __func__, retval);
+
+ exit:
+ return retval;
+}
+
+static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset)
+{
+ u8 res_val = reset; /* avoid argument promotion */
+
+ if (!upriv->udev) {
+ err("%s: !upriv->udev", __func__);
+ return -EFAULT;
+ }
+ return usb_control_msg(upriv->udev,
+ usb_sndctrlpipe(upriv->udev, 0),
+ EZUSB_REQUEST_FW_TRANS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_OUT, EZUSB_CPUCS_REG, 0, &res_val,
+ sizeof(res_val), DEF_TIMEOUT);
+}
+
+static int ezusb_firmware_download(struct ezusb_priv *upriv,
+ struct ez_usb_fw *fw)
+{
+ u8 fw_buffer[FW_BUF_SIZE];
+ int retval, addr;
+ int variant_offset;
+
+ /*
+ * This byte is 1 and should be replaced with 0. The offset is
+ * 0x10AD in version 0.0.6. The byte in question should follow
+ * the end of the code pointed to by the jump in the beginning
+ * of the firmware. Also, it is read by code located at 0x358.
+ */
+ variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]);
+ if (variant_offset >= fw->size) {
+ printk(KERN_ERR PFX "Invalid firmware variant offset: "
+ "0x%04x\n", variant_offset);
+ retval = -EINVAL;
+ goto fail;
+ }
+
+ retval = ezusb_8051_cpucs(upriv, 1);
+ if (retval < 0)
+ goto fail;
+ for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) {
+ /* 0x100-0x300 should be left alone, it contains card
+ * specific data, like USB enumeration information */
+ if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END))
+ continue;
+
+ memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE);
+ if (variant_offset >= addr &&
+ variant_offset < addr + FW_BUF_SIZE) {
+ dbg("Patching card_variant byte at 0x%04X",
+ variant_offset);
+ fw_buffer[variant_offset - addr] = FW_VAR_VALUE;
+ }
+ retval = usb_control_msg(upriv->udev,
+ usb_sndctrlpipe(upriv->udev, 0),
+ EZUSB_REQUEST_FW_TRANS,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE
+ | USB_DIR_OUT,
+ addr, 0x0,
+ fw_buffer, FW_BUF_SIZE,
+ DEF_TIMEOUT);
+
+ if (retval < 0)
+ goto fail;
+ }
+ retval = ezusb_8051_cpucs(upriv, 0);
+ if (retval < 0)
+ goto fail;
+
+ goto exit;
+ fail:
+ printk(KERN_ERR PFX "Firmware download failed, error %d\n",
+ retval);
+ exit:
+ return retval;
+}
+
+static int ezusb_access_ltv(struct ezusb_priv *upriv,
+ struct request_context *ctx,
+ u16 length, const void *data, u16 frame_type,
+ void *ans_buff, int ans_size, u16 *ans_length)
+{
+ int req_size;
+ int retval = 0;
+ enum ezusb_state state;
+
+ BUG_ON(in_irq());
+
+ if (!upriv->udev) {
+ dbg("Device disconnected");
+ return -ENODEV;
+ }
+
+ if (upriv->read_urb->status != -EINPROGRESS)
+ err("%s: in urb not pending", __func__);
+
+ /* protect upriv->reply_count, guarantee sequential numbers */
+ spin_lock_bh(&upriv->reply_count_lock);
+ req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data,
+ frame_type, upriv->reply_count);
+ usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe,
+ ctx->buf, req_size,
+ ezusb_request_out_callback, ctx);
+
+ if (ctx->in_rid)
+ upriv->reply_count = ezusb_reply_inc(upriv->reply_count);
+
+ ezusb_req_enqueue_run(upriv, ctx);
+
+ spin_unlock_bh(&upriv->reply_count_lock);
+
+ if (ctx->in_rid)
+ ezusb_req_ctx_wait(upriv, ctx);
+
+ state = ctx->state;
+ switch (state) {
+ case EZUSB_CTX_COMPLETE:
+ retval = ctx->outurb->status;
+ break;
+
+ case EZUSB_CTX_QUEUED:
+ case EZUSB_CTX_REQ_SUBMITTED:
+ if (!ctx->in_rid)
+ break;
+ default:
+ err("%s: Unexpected context state %d", __func__,
+ state);
+ /* fall though */
+ case EZUSB_CTX_REQ_TIMEOUT:
+ case EZUSB_CTX_REQ_FAILED:
+ case EZUSB_CTX_RESP_TIMEOUT:
+ case EZUSB_CTX_REQSUBMIT_FAIL:
+ printk(KERN_ERR PFX "Access failed, resetting (state %d,"
+ " reply_count %d)\n", state, upriv->reply_count);
+ upriv->reply_count = 0;
+ if (state == EZUSB_CTX_REQ_TIMEOUT
+ || state == EZUSB_CTX_RESP_TIMEOUT) {
+ printk(KERN_ERR PFX "ctx timed out\n");
+ retval = -ETIMEDOUT;
+ } else {
+ printk(KERN_ERR PFX "ctx failed\n");
+ retval = -EFAULT;
+ }
+ goto exit;
+ break;
+ }
+ if (ctx->in_rid) {
+ struct ezusb_packet *ans = ctx->buf;
+ int exp_len;
+
+ if (ans->hermes_len != 0)
+ exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12;
+ else
+ exp_len = 14;
+
+ if (exp_len != ctx->buf_length) {
+ err("%s: length mismatch for RID 0x%04x: "
+ "expected %d, got %d", __func__,
+ ctx->in_rid, exp_len, ctx->buf_length);
+ retval = -EIO;
+ goto exit;
+ }
+
+ if (ans_buff)
+ memcpy(ans_buff, ans->data,
+ min_t(int, exp_len, ans_size));
+ if (ans_length)
+ *ans_length = le16_to_cpu(ans->hermes_len);
+ }
+ exit:
+ ezusb_request_context_put(ctx);
+ return retval;
+}
+
+static int ezusb_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *data)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ u16 frame_type;
+ struct request_context *ctx;
+
+ if (length == 0)
+ return -EINVAL;
+
+ length = HERMES_RECLEN_TO_BYTES(length);
+
+ /* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be
+ * set to be empty, but the USB bridge doesn't like it */
+ if (length == 0)
+ return 0;
+
+ ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ if (rid == EZUSB_RID_TX)
+ frame_type = EZUSB_FRAME_DATA;
+ else
+ frame_type = EZUSB_FRAME_CONTROL;
+
+ return ezusb_access_ltv(upriv, ctx, length, data, frame_type,
+ NULL, 0, NULL);
+}
+
+static int ezusb_read_ltv(hermes_t *hw, int bap, u16 rid,
+ unsigned bufsize, u16 *length, void *buf)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+
+ if ((bufsize < 0) || (bufsize % 2))
+ return -EINVAL;
+
+ ctx = ezusb_alloc_ctx(upriv, rid, rid);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL,
+ buf, bufsize, length);
+}
+
+static int ezusb_doicmd_wait(hermes_t *hw, u16 cmd, u16 parm0, u16 parm1,
+ u16 parm2, struct hermes_response *resp)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+
+ __le16 data[4] = {
+ cpu_to_le16(cmd),
+ cpu_to_le16(parm0),
+ cpu_to_le16(parm1),
+ cpu_to_le16(parm2),
+ };
+ dbg("0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X",
+ cmd, parm0, parm1, parm2);
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+
+ __le16 data[4] = {
+ cpu_to_le16(cmd),
+ cpu_to_le16(parm0),
+ 0,
+ 0,
+ };
+ dbg("0x%04X, parm0 0x%04X", cmd, parm0);
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_bap_pread(struct hermes *hw, int bap,
+ void *buf, int len, u16 id, u16 offset)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer;
+ int actual_length = upriv->read_urb->actual_length;
+
+ if (id == EZUSB_RID_RX) {
+ if ((sizeof(*ans) + offset + len) > actual_length) {
+ printk(KERN_ERR PFX "BAP read beyond buffer end "
+ "in rx frame\n");
+ return -EINVAL;
+ }
+ memcpy(buf, ans->data + offset, len);
+ return 0;
+ }
+
+ if (EZUSB_IS_INFO(id)) {
+ /* Include 4 bytes for length/type */
+ if ((sizeof(*ans) + offset + len - 4) > actual_length) {
+ printk(KERN_ERR PFX "BAP read beyond buffer end "
+ "in info frame\n");
+ return -EFAULT;
+ }
+ memcpy(buf, ans->data + offset - 4, len);
+ } else {
+ printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ezusb_read_pda(struct hermes *hw, __le16 *pda,
+ u32 pda_addr, u16 pda_len)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+ __le16 data[] = {
+ cpu_to_le16(pda_addr & 0xffff),
+ cpu_to_le16(pda_len - 4)
+ };
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA);
+ if (!ctx)
+ return -ENOMEM;
+
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+
+ return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4,
+ NULL);
+}
+
+static int ezusb_program_init(struct hermes *hw, u32 entry_point)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+ __le32 data = cpu_to_le32(entry_point);
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program_end(struct hermes *hw)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, 0, NULL,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program_bytes(struct hermes *hw, const char *buf,
+ u32 addr, u32 len)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ struct request_context *ctx;
+ __le32 data = cpu_to_le32(addr);
+ int err;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+ if (err)
+ return err;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK);
+ if (!ctx)
+ return -ENOMEM;
+
+ return ezusb_access_ltv(upriv, ctx, len, buf,
+ EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_program(struct hermes *hw, const char *buf,
+ u32 addr, u32 len)
+{
+ u32 ch_addr;
+ u32 ch_len;
+ int err = 0;
+
+ /* We can only send 2048 bytes out of the bulk xmit at a time,
+ * so we have to split any programming into chunks of <2048
+ * bytes. */
+
+ ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE;
+ ch_addr = addr;
+
+ while (ch_addr < (addr + len)) {
+ pr_debug("Programming subblock of length %d "
+ "to address 0x%08x. Data @ %p\n",
+ ch_len, ch_addr, &buf[ch_addr - addr]);
+
+ err = ezusb_program_bytes(hw, &buf[ch_addr - addr],
+ ch_addr, ch_len);
+ if (err)
+ break;
+
+ ch_addr += ch_len;
+ ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ?
+ (addr + len - ch_addr) : MAX_DL_SIZE;
+ }
+
+ return err;
+}
+
+static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct orinoco_private *priv = ndev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct ezusb_priv *upriv = priv->card;
+ u8 mic[MICHAEL_MIC_LEN+1];
+ int err = 0;
+ int tx_control;
+ unsigned long flags;
+ struct request_context *ctx;
+ u8 *buf;
+ int tx_size;
+
+ if (!netif_running(dev)) {
+ printk(KERN_ERR "%s: Tx on stopped device!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (netif_queue_stopped(dev)) {
+ printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_ERR
+ "%s: ezusb_xmit() called while hw_unavailable\n",
+ dev->name);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (!netif_carrier_ok(dev) ||
+ (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
+ /* Oops, the firmware hasn't established a connection,
+ silently drop the packet (this seems to be the
+ safest approach). */
+ goto drop;
+ }
+
+ /* Check packet length */
+ if (skb->len < ETH_HLEN)
+ goto drop;
+
+ ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
+ if (!ctx)
+ goto busy;
+
+ memset(ctx->buf, 0, BULK_BUF_SIZE);
+ buf = ctx->buf->data;
+
+ tx_control = 0;
+
+ err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
+ &mic[0]);
+ if (err)
+ goto drop;
+
+ {
+ __le16 *tx_cntl = (__le16 *)buf;
+ *tx_cntl = cpu_to_le16(tx_control);
+ buf += sizeof(*tx_cntl);
+ }
+
+ memcpy(buf, skb->data, skb->len);
+ buf += skb->len;
+
+ if (tx_control & HERMES_TXCTRL_MIC) {
+ u8 *m = mic;
+ /* Mic has been offset so it can be copied to an even
+ * address. We're copying eveything anyway, so we
+ * don't need to copy that first byte. */
+ if (skb->len % 2)
+ m++;
+ memcpy(buf, m, MICHAEL_MIC_LEN);
+ buf += MICHAEL_MIC_LEN;
+ }
+
+ /* Finally, we actually initiate the send */
+ netif_stop_queue(dev);
+
+ /* The card may behave better if we send evenly sized usb transfers */
+ tx_size = ALIGN(buf - ctx->buf->data, 2);
+
+ err = ezusb_access_ltv(upriv, ctx, tx_size, NULL,
+ EZUSB_FRAME_DATA, NULL, 0, NULL);
+
+ if (err) {
+ netif_start_queue(dev);
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d transmitting packet\n",
+ dev->name, err);
+ goto busy;
+ }
+
+ dev->trans_start = jiffies;
+ stats->tx_bytes += skb->len;
+ goto ok;
+
+ drop:
+ stats->tx_errors++;
+ stats->tx_dropped++;
+
+ ok:
+ orinoco_unlock(priv, &flags);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+
+ busy:
+ orinoco_unlock(priv, &flags);
+ return NETDEV_TX_BUSY;
+}
+
+static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid)
+{
+ *fid = EZUSB_RID_TX;
+ return 0;
+}
+
+
+static int ezusb_hard_reset(struct orinoco_private *priv)
+{
+ struct ezusb_priv *upriv = priv->card;
+ int retval = ezusb_8051_cpucs(upriv, 1);
+
+ if (retval < 0) {
+ err("Failed to reset");
+ return retval;
+ }
+
+ retval = ezusb_8051_cpucs(upriv, 0);
+ if (retval < 0) {
+ err("Failed to unreset");
+ return retval;
+ }
+
+ dbg("sending control message");
+ retval = usb_control_msg(upriv->udev,
+ usb_sndctrlpipe(upriv->udev, 0),
+ EZUSB_REQUEST_TRIGER,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_OUT, 0x0, 0x0, NULL, 0,
+ DEF_TIMEOUT);
+ if (retval < 0) {
+ err("EZUSB_REQUEST_TRIGER failed retval %d", retval);
+ return retval;
+ }
+#if 0
+ dbg("Sending EZUSB_REQUEST_TRIG_AC");
+ retval = usb_control_msg(upriv->udev,
+ usb_sndctrlpipe(upriv->udev, 0),
+ EZUSB_REQUEST_TRIG_AC,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+ USB_DIR_OUT, 0x00FA, 0x0, NULL, 0,
+ DEF_TIMEOUT);
+ if (retval < 0) {
+ err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval);
+ return retval;
+ }
+#endif
+
+ return 0;
+}
+
+
+static int ezusb_init(hermes_t *hw)
+{
+ struct ezusb_priv *upriv = hw->priv;
+ int retval;
+
+ BUG_ON(in_interrupt());
+ BUG_ON(!upriv);
+
+ upriv->reply_count = 0;
+ /* Write the MAGIC number on the simulated registers to keep
+ * orinoco.c happy */
+ hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+ hermes_write_regn(hw, RXFID, EZUSB_RID_RX);
+
+ usb_kill_urb(upriv->read_urb);
+ ezusb_submit_in_urb(upriv);
+
+ retval = ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1,
+ HERMES_BYTES_TO_RECLEN(2), "\x10\x00");
+ if (retval < 0) {
+ printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval);
+ return retval;
+ }
+
+ retval = ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL);
+ if (retval < 0) {
+ printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval);
+ return retval;
+ }
+
+ return 0;
+}
+
+static void ezusb_bulk_in_callback(struct urb *urb)
+{
+ struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context;
+ struct ezusb_packet *ans = urb->transfer_buffer;
+ u16 crc;
+ u16 hermes_rid;
+
+ if (upriv->udev == NULL) {
+ dbg("disconnected");
+ return;
+ }
+
+ if (urb->status == -ETIMEDOUT) {
+ /* When a device gets unplugged we get this every time
+ * we resubmit, flooding the logs. Since we don't use
+ * USB timeouts, it shouldn't happen any other time*/
+ pr_warning("%s: urb timed out, not resubmiting", __func__);
+ return;
+ }
+ if (urb->status == -ECONNABORTED) {
+ pr_warning("%s: connection abort, resubmiting urb",
+ __func__);
+ goto resubmit;
+ }
+ if ((urb->status == -EILSEQ)
+ || (urb->status == -ENOENT)
+ || (urb->status == -ECONNRESET)) {
+ dbg("status %d, not resubmiting", urb->status);
+ return;
+ }
+ if (urb->status)
+ dbg("status: %d length: %d",
+ urb->status, urb->actual_length);
+ if (urb->actual_length < sizeof(*ans)) {
+ err("%s: short read, ignoring", __func__);
+ goto resubmit;
+ }
+ crc = build_crc(ans);
+ if (le16_to_cpu(ans->crc) != crc) {
+ err("CRC error, ignoring packet");
+ goto resubmit;
+ }
+
+ hermes_rid = le16_to_cpu(ans->hermes_rid);
+ if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) {
+ ezusb_request_in_callback(upriv, urb);
+ } else if (upriv->dev) {
+ struct net_device *dev = upriv->dev;
+ struct orinoco_private *priv = ndev_priv(dev);
+ hermes_t *hw = &priv->hw;
+
+ if (hermes_rid == EZUSB_RID_RX) {
+ __orinoco_ev_rx(dev, hw);
+ } else {
+ hermes_write_regn(hw, INFOFID,
+ le16_to_cpu(ans->hermes_rid));
+ __orinoco_ev_info(dev, hw);
+ }
+ }
+
+ resubmit:
+ if (upriv->udev)
+ ezusb_submit_in_urb(upriv);
+}
+
+static inline void ezusb_delete(struct ezusb_priv *upriv)
+{
+ struct net_device *dev;
+ struct list_head *item;
+ struct list_head *tmp_item;
+ unsigned long flags;
+
+ BUG_ON(in_interrupt());
+ BUG_ON(!upriv);
+
+ dev = upriv->dev;
+ mutex_lock(&upriv->mtx);
+
+ upriv->udev = NULL; /* No timer will be rearmed from here */
+
+ usb_kill_urb(upriv->read_urb);
+
+ spin_lock_irqsave(&upriv->req_lock, flags);
+ list_for_each_safe(item, tmp_item, &upriv->req_active) {
+ struct request_context *ctx;
+ int err;
+
+ ctx = list_entry(item, struct request_context, list);
+ atomic_inc(&ctx->refcount);
+
+ ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+ err = usb_unlink_urb(ctx->outurb);
+
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+ if (err == -EINPROGRESS)
+ wait_for_completion(&ctx->done);
+
+ del_timer_sync(&ctx->timer);
+ /* FIXME: there is an slight chance for the irq handler to
+ * be running */
+ if (!list_empty(&ctx->list))
+ ezusb_ctx_complete(ctx);
+
+ ezusb_request_context_put(ctx);
+ spin_lock_irqsave(&upriv->req_lock, flags);
+ }
+ spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ list_for_each_safe(item, tmp_item, &upriv->req_pending)
+ ezusb_ctx_complete(list_entry(item,
+ struct request_context, list));
+
+ if (upriv->read_urb->status == -EINPROGRESS)
+ printk(KERN_ERR PFX "Some URB in progress\n");
+
+ mutex_unlock(&upriv->mtx);
+
+ kfree(upriv->read_urb->transfer_buffer);
+ if (upriv->bap_buf != NULL)
+ kfree(upriv->bap_buf);
+ if (upriv->read_urb != NULL)
+ usb_free_urb(upriv->read_urb);
+ if (upriv->dev) {
+ struct orinoco_private *priv = ndev_priv(upriv->dev);
+ orinoco_if_del(priv);
+ free_orinocodev(priv);
+ }
+}
+
+static void ezusb_lock_irqsave(spinlock_t *lock,
+ unsigned long *flags) __acquires(lock)
+{
+ spin_lock_bh(lock);
+}
+
+static void ezusb_unlock_irqrestore(spinlock_t *lock,
+ unsigned long *flags) __releases(lock)
+{
+ spin_unlock_bh(lock);
+}
+
+static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock)
+{
+ spin_lock_bh(lock);
+}
+
+static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock)
+{
+ spin_unlock_bh(lock);
+}
+
+static const struct hermes_ops ezusb_ops = {
+ .init = ezusb_init,
+ .cmd_wait = ezusb_docmd_wait,
+ .init_cmd_wait = ezusb_doicmd_wait,
+ .allocate = ezusb_allocate,
+ .read_ltv = ezusb_read_ltv,
+ .write_ltv = ezusb_write_ltv,
+ .bap_pread = ezusb_bap_pread,
+ .read_pda = ezusb_read_pda,
+ .program_init = ezusb_program_init,
+ .program_end = ezusb_program_end,
+ .program = ezusb_program,
+ .lock_irqsave = ezusb_lock_irqsave,
+ .unlock_irqrestore = ezusb_unlock_irqrestore,
+ .lock_irq = ezusb_lock_irq,
+ .unlock_irq = ezusb_unlock_irq,
+};
+
+static const struct net_device_ops ezusb_netdev_ops = {
+ .ndo_open = orinoco_open,
+ .ndo_stop = orinoco_stop,
+ .ndo_start_xmit = ezusb_xmit,
+ .ndo_set_multicast_list = orinoco_set_multicast_list,
+ .ndo_change_mtu = orinoco_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_tx_timeout = orinoco_tx_timeout,
+ .ndo_get_stats = orinoco_get_stats,
+};
+
+static int ezusb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct orinoco_private *priv;
+ hermes_t *hw;
+ struct ezusb_priv *upriv = NULL;
+ struct usb_interface_descriptor *iface_desc;
+ struct usb_endpoint_descriptor *ep;
+ const struct firmware *fw_entry;
+ int retval = 0;
+ int i;
+
+ priv = alloc_orinocodev(sizeof(*upriv), &udev->dev,
+ ezusb_hard_reset, NULL);
+ if (!priv) {
+ err("Couldn't allocate orinocodev");
+ goto exit;
+ }
+
+ hw = &priv->hw;
+
+ upriv = priv->card;
+
+ mutex_init(&upriv->mtx);
+ spin_lock_init(&upriv->reply_count_lock);
+
+ spin_lock_init(&upriv->req_lock);
+ INIT_LIST_HEAD(&upriv->req_pending);
+ INIT_LIST_HEAD(&upriv->req_active);
+
+ upriv->udev = udev;
+
+ hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake;
+ hw->reg_spacing = HERMES_16BIT_REGSPACING;
+ hw->priv = upriv;
+ hw->ops = &ezusb_ops;
+
+ /* set up the endpoint information */
+ /* check out the endpoints */
+
+ iface_desc = &interface->altsetting[0].desc;
+ for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
+ ep = &interface->altsetting[0].endpoint[i].desc;
+
+ if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) &&
+ ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)) {
+ /* we found a bulk in endpoint */
+ if (upriv->read_urb != NULL) {
+ pr_warning("Found a second bulk in ep, ignored");
+ continue;
+ }
+
+ upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!upriv->read_urb) {
+ err("No free urbs available");
+ goto error;
+ }
+ if (le16_to_cpu(ep->wMaxPacketSize) != 64)
+ pr_warning("bulk in: wMaxPacketSize!= 64");
+ if (ep->bEndpointAddress != (2 | USB_DIR_IN))
+ pr_warning("bulk in: bEndpointAddress: %d",
+ ep->bEndpointAddress);
+ upriv->read_pipe = usb_rcvbulkpipe(udev,
+ ep->
+ bEndpointAddress);
+ upriv->read_urb->transfer_buffer =
+ kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
+ if (!upriv->read_urb->transfer_buffer) {
+ err("Couldn't allocate IN buffer");
+ goto error;
+ }
+ }
+
+ if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_OUT) &&
+ ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)) {
+ /* we found a bulk out endpoint */
+ if (upriv->bap_buf != NULL) {
+ pr_warning("Found a second bulk out ep, ignored");
+ continue;
+ }
+
+ if (le16_to_cpu(ep->wMaxPacketSize) != 64)
+ pr_warning("bulk out: wMaxPacketSize != 64");
+ if (ep->bEndpointAddress != 2)
+ pr_warning("bulk out: bEndpointAddress: %d",
+ ep->bEndpointAddress);
+ upriv->write_pipe = usb_sndbulkpipe(udev,
+ ep->
+ bEndpointAddress);
+ upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
+ if (!upriv->bap_buf) {
+ err("Couldn't allocate bulk_out_buffer");
+ goto error;
+ }
+ }
+ }
+ if (!upriv->bap_buf || !upriv->read_urb) {
+ err("Didn't find the required bulk endpoints");
+ goto error;
+ }
+
+ if (request_firmware(&fw_entry, "orinoco_ezusb_fw",
+ &interface->dev) == 0) {
+ firmware.size = fw_entry->size;
+ firmware.code = fw_entry->data;
+ }
+ if (firmware.size && firmware.code) {
+ ezusb_firmware_download(upriv, &firmware);
+ } else {
+ err("No firmware to download");
+ goto error;
+ }
+
+ if (ezusb_hard_reset(priv) < 0) {
+ err("Cannot reset the device");
+ goto error;
+ }
+
+ /* If the firmware is already downloaded orinoco.c will call
+ * ezusb_init but if the firmware is not already there, that will make
+ * the kernel very unstable, so we try initializing here and quit in
+ * case of error */
+ if (ezusb_init(hw) < 0) {
+ err("Couldn't initialize the device");
+ err("Firmware may not be downloaded or may be wrong.");
+ goto error;
+ }
+
+ /* Initialise the main driver */
+ if (orinoco_init(priv) != 0) {
+ err("orinoco_init() failed\n");
+ goto error;
+ }
+
+ if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) {
+ upriv->dev = NULL;
+ err("%s: orinoco_if_add() failed", __func__);
+ goto error;
+ }
+ upriv->dev = priv->ndev;
+
+ goto exit;
+
+ error:
+ ezusb_delete(upriv);
+ if (upriv->dev) {
+ /* upriv->dev was 0, so ezusb_delete() didn't free it */
+ free_orinocodev(priv);
+ }
+ upriv = NULL;
+ retval = -EFAULT;
+ exit:
+ if (fw_entry) {
+ firmware.code = NULL;
+ firmware.size = 0;
+ release_firmware(fw_entry);
+ }
+ usb_set_intfdata(interface, upriv);
+ return retval;
+}
+
+
+static void ezusb_disconnect(struct usb_interface *intf)
+{
+ struct ezusb_priv *upriv = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+ ezusb_delete(upriv);
+ printk(KERN_INFO PFX "Disconnected\n");
+}
+
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver orinoco_driver = {
+ .name = DRIVER_NAME,
+ .probe = ezusb_probe,
+ .disconnect = ezusb_disconnect,
+ .id_table = ezusb_table,
+};
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Manuel Estrada Sainz)";
+
+static int __init ezusb_module_init(void)
+{
+ int err;
+
+ printk(KERN_DEBUG "%s\n", version);
+
+ /* register this driver with the USB subsystem */
+ err = usb_register(&orinoco_driver);
+ if (err < 0) {
+ printk(KERN_ERR PFX "usb_register failed, error %d\n",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit ezusb_module_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&orinoco_driver);
+}
+
+
+module_init(ezusb_module_init);
+module_exit(ezusb_module_exit);
+
+MODULE_AUTHOR("Manuel Estrada Sainz");
+MODULE_DESCRIPTION
+ ("Driver for Orinoco wireless LAN cards using EZUSB bridge");
+MODULE_LICENSE("Dual MPL/GPL");
diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c
index 330d42d..4300d9d 100644
--- a/drivers/net/wireless/orinoco/scan.c
+++ b/drivers/net/wireless/orinoco/scan.c
@@ -127,7 +127,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv,
{
struct wiphy *wiphy = priv_to_wiphy(priv);
struct ieee80211_channel *channel;
- u8 *ie;
+ const u8 *ie;
u64 timestamp;
s32 signal;
u16 capability;
@@ -136,7 +136,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv,
int chan, freq;
ie_len = len - sizeof(*bss);
- ie = orinoco_get_ie(bss->data, ie_len, WLAN_EID_DS_PARAMS);
+ ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len);
chan = ie ? ie[2] : 0;
freq = ieee80211_dsss_chan_to_freq(chan);
channel = ieee80211_get_channel(wiphy, freq);
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 41b9ce4..b51a9ad 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -337,6 +337,7 @@ spectrum_cs_config(struct pcmcia_device *link)
goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+ hw->eeprom_pda = true;
/*
* This actually configures the PCMCIA socket -- setting up
@@ -359,7 +360,7 @@ spectrum_cs_config(struct pcmcia_device *link)
/* Register an interface with the stack */
if (orinoco_if_add(priv, link->io.BasePort1,
- link->irq) != 0) {
+ link->irq, NULL) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}
@@ -384,9 +385,9 @@ spectrum_cs_release(struct pcmcia_device *link)
/* We're committed to taking the device away now, so mark the
* hardware as unavailable */
- spin_lock_irqsave(&priv->lock, flags);
+ priv->hw.ops->lock_irqsave(&priv->lock, &flags);
priv->hw_unavailable++;
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
pcmcia_disable_device(link);
if (priv->hw.iobase)
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index fbcc6e1..5775124 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -458,7 +458,7 @@ static int orinoco_ioctl_setfreq(struct net_device *dev,
if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
/* Fast channel change - no commit if successful */
hermes_t *hw = &priv->hw;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
HERMES_TEST_SET_CHANNEL,
chan, NULL);
}
@@ -538,125 +538,6 @@ static int orinoco_ioctl_setsens(struct net_device *dev,
return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_setrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int val = rrq->value;
- unsigned long flags;
-
- if (rrq->disabled)
- val = 2347;
-
- if ((val < 0) || (val > 2347))
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->rts_thresh = val;
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- rrq->value = priv->rts_thresh;
- rrq->disabled = (rrq->value == 2347);
- rrq->fixed = 1;
-
- return 0;
-}
-
-static int orinoco_ioctl_setfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frq,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (priv->has_mwo) {
- if (frq->disabled)
- priv->mwo_robust = 0;
- else {
- if (frq->fixed)
- printk(KERN_WARNING "%s: Fixed fragmentation "
- "is not supported on this firmware. "
- "Using MWO robust instead.\n",
- dev->name);
- priv->mwo_robust = 1;
- }
- } else {
- if (frq->disabled)
- priv->frag_thresh = 2346;
- else {
- if ((frq->value < 256) || (frq->value > 2346))
- err = -EINVAL;
- else
- /* must be even */
- priv->frag_thresh = frq->value & ~0x1;
- }
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frq,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- u16 val;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (priv->has_mwo) {
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- &val);
- if (err)
- val = 0;
-
- frq->value = val ? 2347 : 0;
- frq->disabled = !val;
- frq->fixed = 0;
- } else {
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- &val);
- if (err)
- val = 0;
-
- frq->value = val;
- frq->disabled = (val >= 2346);
- frq->fixed = 1;
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
static int orinoco_ioctl_setrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rrq,
@@ -1201,60 +1082,6 @@ static int orinoco_ioctl_set_mlme(struct net_device *dev,
return ret;
}
-static int orinoco_ioctl_getretry(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rrq,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err = 0;
- u16 short_limit, long_limit, lifetime;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
- &short_limit);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
- &long_limit);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
- &lifetime);
- if (err)
- goto out;
-
- rrq->disabled = 0; /* Can't be disabled */
-
- /* Note : by default, display the retry number */
- if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
- rrq->flags = IW_RETRY_LIFETIME;
- rrq->value = lifetime * 1000; /* ??? */
- } else {
- /* By default, display the min number */
- if ((rrq->flags & IW_RETRY_LONG)) {
- rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
- rrq->value = long_limit;
- } else {
- rrq->flags = IW_RETRY_LIMIT;
- rrq->value = short_limit;
- if (short_limit != long_limit)
- rrq->flags |= IW_RETRY_SHORT;
- }
- }
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
static int orinoco_ioctl_reset(struct net_device *dev,
struct iw_request_info *info,
void *wrqu,
@@ -1446,8 +1273,8 @@ static int orinoco_ioctl_getrid(struct net_device *dev,
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
- extra);
+ err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
+ extra);
if (err)
goto out;
@@ -1506,46 +1333,44 @@ static const struct iw_priv_args orinoco_privtab[] = {
* Structures to export the Wireless Handlers
*/
-#define STD_IW_HANDLER(id, func) \
- [IW_IOCTL_IDX(id)] = (iw_handler) func
static const iw_handler orinoco_handler[] = {
- STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit),
- STD_IW_HANDLER(SIOCGIWNAME, cfg80211_wext_giwname),
- STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq),
- STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq),
- STD_IW_HANDLER(SIOCSIWMODE, cfg80211_wext_siwmode),
- STD_IW_HANDLER(SIOCGIWMODE, cfg80211_wext_giwmode),
- STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens),
- STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens),
- STD_IW_HANDLER(SIOCGIWRANGE, cfg80211_wext_giwrange),
- STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
- STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
- STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
- STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
- STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap),
- STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap),
- STD_IW_HANDLER(SIOCSIWSCAN, cfg80211_wext_siwscan),
- STD_IW_HANDLER(SIOCGIWSCAN, cfg80211_wext_giwscan),
- STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid),
- STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid),
- STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate),
- STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate),
- STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts),
- STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts),
- STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag),
- STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag),
- STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry),
- STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode),
- STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode),
- STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower),
- STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower),
- STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie),
- STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie),
- STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme),
- STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth),
- STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth),
- STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
- STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
+ IW_HANDLER(SIOCSIWCOMMIT, (iw_handler)orinoco_ioctl_commit),
+ IW_HANDLER(SIOCGIWNAME, (iw_handler)cfg80211_wext_giwname),
+ IW_HANDLER(SIOCSIWFREQ, (iw_handler)orinoco_ioctl_setfreq),
+ IW_HANDLER(SIOCGIWFREQ, (iw_handler)orinoco_ioctl_getfreq),
+ IW_HANDLER(SIOCSIWMODE, (iw_handler)cfg80211_wext_siwmode),
+ IW_HANDLER(SIOCGIWMODE, (iw_handler)cfg80211_wext_giwmode),
+ IW_HANDLER(SIOCSIWSENS, (iw_handler)orinoco_ioctl_setsens),
+ IW_HANDLER(SIOCGIWSENS, (iw_handler)orinoco_ioctl_getsens),
+ IW_HANDLER(SIOCGIWRANGE, (iw_handler)cfg80211_wext_giwrange),
+ IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
+ IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
+ IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
+ IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
+ IW_HANDLER(SIOCSIWAP, (iw_handler)orinoco_ioctl_setwap),
+ IW_HANDLER(SIOCGIWAP, (iw_handler)orinoco_ioctl_getwap),
+ IW_HANDLER(SIOCSIWSCAN, (iw_handler)cfg80211_wext_siwscan),
+ IW_HANDLER(SIOCGIWSCAN, (iw_handler)cfg80211_wext_giwscan),
+ IW_HANDLER(SIOCSIWESSID, (iw_handler)orinoco_ioctl_setessid),
+ IW_HANDLER(SIOCGIWESSID, (iw_handler)orinoco_ioctl_getessid),
+ IW_HANDLER(SIOCSIWRATE, (iw_handler)orinoco_ioctl_setrate),
+ IW_HANDLER(SIOCGIWRATE, (iw_handler)orinoco_ioctl_getrate),
+ IW_HANDLER(SIOCSIWRTS, (iw_handler)cfg80211_wext_siwrts),
+ IW_HANDLER(SIOCGIWRTS, (iw_handler)cfg80211_wext_giwrts),
+ IW_HANDLER(SIOCSIWFRAG, (iw_handler)cfg80211_wext_siwfrag),
+ IW_HANDLER(SIOCGIWFRAG, (iw_handler)cfg80211_wext_giwfrag),
+ IW_HANDLER(SIOCGIWRETRY, (iw_handler)cfg80211_wext_giwretry),
+ IW_HANDLER(SIOCSIWENCODE, (iw_handler)orinoco_ioctl_setiwencode),
+ IW_HANDLER(SIOCGIWENCODE, (iw_handler)orinoco_ioctl_getiwencode),
+ IW_HANDLER(SIOCSIWPOWER, (iw_handler)orinoco_ioctl_setpower),
+ IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower),
+ IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie),
+ IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie),
+ IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme),
+ IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth),
+ IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth),
+ IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
+ IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
};
@@ -1553,15 +1378,15 @@ static const iw_handler orinoco_handler[] = {
Added typecasting since we no longer use iwreq_data -- Moustafa
*/
static const iw_handler orinoco_private_handler[] = {
- [0] = (iw_handler) orinoco_ioctl_reset,
- [1] = (iw_handler) orinoco_ioctl_reset,
- [2] = (iw_handler) orinoco_ioctl_setport3,
- [3] = (iw_handler) orinoco_ioctl_getport3,
- [4] = (iw_handler) orinoco_ioctl_setpreamble,
- [5] = (iw_handler) orinoco_ioctl_getpreamble,
- [6] = (iw_handler) orinoco_ioctl_setibssport,
- [7] = (iw_handler) orinoco_ioctl_getibssport,
- [9] = (iw_handler) orinoco_ioctl_getrid,
+ [0] = (iw_handler)orinoco_ioctl_reset,
+ [1] = (iw_handler)orinoco_ioctl_reset,
+ [2] = (iw_handler)orinoco_ioctl_setport3,
+ [3] = (iw_handler)orinoco_ioctl_getport3,
+ [4] = (iw_handler)orinoco_ioctl_setpreamble,
+ [5] = (iw_handler)orinoco_ioctl_getpreamble,
+ [6] = (iw_handler)orinoco_ioctl_setibssport,
+ [7] = (iw_handler)orinoco_ioctl_getibssport,
+ [9] = (iw_handler)orinoco_ioctl_getrid,
};
const struct iw_handler_def orinoco_handler_def = {
OpenPOWER on IntegriCloud