summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwifiex/sta_ioctl.c
diff options
context:
space:
mode:
authorDaniel Drake <dsd@laptop.org>2013-06-14 15:24:24 -0400
committerJohn W. Linville <linville@tuxdriver.com>2013-06-17 14:38:51 -0400
commit6390d88529835a8ad3563fe01a5da89fa52d6db2 (patch)
tree0761f683f4a31ff7cdba5c1e1ed9cfd9d1422e4e /drivers/net/wireless/mwifiex/sta_ioctl.c
parent3c68ef5b2223e084402a4fedbd4c31774f012f4f (diff)
downloadop-kernel-dev-6390d88529835a8ad3563fe01a5da89fa52d6db2.zip
op-kernel-dev-6390d88529835a8ad3563fe01a5da89fa52d6db2.tar.gz
mwifiex: fix memory corruption when unsetting multicast list
When trying to unset a previously-set multicast list (i.e. the new list has 0 entries), mwifiex_set_multicast_list() was calling down to mwifiex_request_set_multicast_list() while leaving mcast_list.num_multicast_addr as an uninitialized value. We were arriving at mwifiex_cmd_mac_multicast_adr() which would then proceed to do an often huge memcpy of mcast_list.num_multicast_addr*ETH_ALEN bytes, causing memory corruption and hard to debug crashes. Fix this by setting mcast_list.num_multicast_addr to 0 when no multicast list is provided. Similarly, fix up the logic in mwifiex_request_set_multicast_list() to unset the multicast list that was previously sent to the hardware in such cases. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/mwifiex/sta_ioctl.c')
-rw-r--r--drivers/net/wireless/mwifiex/sta_ioctl.c18
1 files changed, 8 insertions, 10 deletions
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 1a8a19d..23aa910 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -104,16 +104,14 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
} else {
priv->curr_pkt_filter &=
~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
- if (mcast_list->num_multicast_addr) {
- dev_dbg(priv->adapter->dev,
- "info: Set multicast list=%d\n",
- mcast_list->num_multicast_addr);
- /* Send multicast addresses to firmware */
- ret = mwifiex_send_cmd_async(priv,
- HostCmd_CMD_MAC_MULTICAST_ADR,
- HostCmd_ACT_GEN_SET, 0,
- mcast_list);
- }
+ dev_dbg(priv->adapter->dev,
+ "info: Set multicast list=%d\n",
+ mcast_list->num_multicast_addr);
+ /* Send multicast addresses to firmware */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_MAC_MULTICAST_ADR,
+ HostCmd_ACT_GEN_SET, 0,
+ mcast_list);
}
}
dev_dbg(priv->adapter->dev,
OpenPOWER on IntegriCloud