mwifiex: AMSDU Rx frame handling in AP mode

This patch processes sub AMSDU frame received in AP mode.

If a packet is multicast/broadcast, it is sent to kernel/upper
layer as well as queued back to AP TX queue so that it can be
sent to other associated stations.

If a packet is unicast and RA is present in associated station list,
it is again requeued into AP TX queue.

If a packet is unicast and RA is not in associated station list,
packet is forwarded to kernel to handle routing logic.

Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/drivers/net/wireless/marvell/mwifiex/uap_txrx.c b/drivers/net/wireless/marvell/mwifiex/uap_txrx.c
index ee7fe58..c95b61d 100644
--- a/drivers/net/wireless/marvell/mwifiex/uap_txrx.c
+++ b/drivers/net/wireless/marvell/mwifiex/uap_txrx.c
@@ -265,6 +265,96 @@ int mwifiex_handle_uap_rx_forward(struct mwifiex_private *priv,
 	return mwifiex_process_rx_packet(priv, skb);
 }
 
+int mwifiex_uap_recv_packet(struct mwifiex_private *priv,
+			    struct sk_buff *skb)
+{
+	struct mwifiex_adapter *adapter = adapter;
+	struct mwifiex_sta_node *src_node;
+	struct ethhdr *p_ethhdr;
+	struct sk_buff *skb_uap;
+	struct mwifiex_txinfo *tx_info;
+
+	if (!skb)
+		return -1;
+
+	p_ethhdr = (void *)skb->data;
+	src_node = mwifiex_get_sta_entry(priv, p_ethhdr->h_source);
+	if (src_node) {
+		src_node->stats.last_rx = jiffies;
+		src_node->stats.rx_bytes += skb->len;
+		src_node->stats.rx_packets++;
+	}
+
+	skb->dev = priv->netdev;
+	skb->protocol = eth_type_trans(skb, priv->netdev);
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* This is required only in case of 11n and USB/PCIE as we alloc
+	 * a buffer of 4K only if its 11N (to be able to receive 4K
+	 * AMSDU packets). In case of SD we allocate buffers based
+	 * on the size of packet and hence this is not needed.
+	 *
+	 * Modifying the truesize here as our allocation for each
+	 * skb is 4K but we only receive 2K packets and this cause
+	 * the kernel to start dropping packets in case where
+	 * application has allocated buffer based on 2K size i.e.
+	 * if there a 64K packet received (in IP fragments and
+	 * application allocates 64K to receive this packet but
+	 * this packet would almost double up because we allocate
+	 * each 1.5K fragment in 4K and pass it up. As soon as the
+	 * 64K limit hits kernel will start to drop rest of the
+	 * fragments. Currently we fail the Filesndl-ht.scr script
+	 * for UDP, hence this fix
+	 */
+	if ((adapter->iface_type == MWIFIEX_USB ||
+	     adapter->iface_type == MWIFIEX_PCIE) &&
+	    (skb->truesize > MWIFIEX_RX_DATA_BUF_SIZE))
+		skb->truesize += (skb->len - MWIFIEX_RX_DATA_BUF_SIZE);
+
+	if (is_multicast_ether_addr(p_ethhdr->h_dest) ||
+	    mwifiex_get_sta_entry(priv, p_ethhdr->h_dest)) {
+		if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN)
+			skb_uap =
+			skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN);
+		else
+			skb_uap = skb_copy(skb, GFP_ATOMIC);
+
+		if (likely(skb_uap)) {
+			tx_info = MWIFIEX_SKB_TXCB(skb_uap);
+			memset(tx_info, 0, sizeof(*tx_info));
+			tx_info->bss_num = priv->bss_num;
+			tx_info->bss_type = priv->bss_type;
+			tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;
+			__net_timestamp(skb_uap);
+			mwifiex_wmm_add_buf_txqueue(priv, skb_uap);
+			atomic_inc(&adapter->tx_pending);
+			atomic_inc(&adapter->pending_bridged_pkts);
+			if ((atomic_read(&adapter->pending_bridged_pkts) >=
+					MWIFIEX_BRIDGED_PKTS_THR_HIGH)) {
+				mwifiex_dbg(adapter, ERROR,
+					    "Tx: Bridge packet limit reached. Drop packet!\n");
+				mwifiex_uap_cleanup_tx_queues(priv);
+			}
+
+		} else {
+			mwifiex_dbg(adapter, ERROR, "failed to allocate skb_uap");
+		}
+
+		mwifiex_queue_main_work(adapter);
+		/* Don't forward Intra-BSS unicast packet to upper layer*/
+		if (mwifiex_get_sta_entry(priv, p_ethhdr->h_dest))
+			return 0;
+	}
+
+	/* Forward multicast/broadcast packet to upper layer*/
+	if (in_interrupt())
+		netif_rx(skb);
+	else
+		netif_rx_ni(skb);
+
+	return 0;
+}
+
 /*
  * This function processes the packet received on AP interface.
  *