iwlagn: move more functions from the start flow to the transport layer

Basically all the nic_init flow should be in the transport layer.
iwl_prepare_card_hw will move to the transport too in a separate patch.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 0 insertions, 102 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 339a89c..6ed0eae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -606,59 +606,6 @@ struct iwl_mod_params iwlagn_mod_params = {
 	/* the rest are 0 by default */
 };
 
-static void iwlagn_set_pwr_vmain(struct iwl_priv *priv)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do:
-
-		if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
-			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-					       APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
-					       ~APMG_PS_CTRL_MSK_PWR_SRC);
- */
-
-	iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-			       APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
-			       ~APMG_PS_CTRL_MSK_PWR_SRC);
-}
-
-/*TODO: this function should move to transport layer */
-int iwlagn_hw_nic_init(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	/* nic_init */
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_apm_init(priv);
-
-	/* Set interrupt coalescing calibration timer to default (512 usecs) */
-	iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwlagn_set_pwr_vmain(priv);
-
-	priv->cfg->lib->nic_config(priv);
-
-	/* Allocate the RX queue, or reset if it is already allocated */
-	trans_rx_init(priv);
-
-	/* Allocate or reset and init all Tx and Command queues */
-	if (trans_tx_init(priv))
-		return -ENOMEM;
-
-	if (priv->cfg->base_params->shadow_reg_enable) {
-		/* enable shadow regs in HW */
-		iwl_set_bit(priv, CSR_MAC_SHADOW_REG_CTRL,
-			0x800FFFFF);
-	}
-
-	set_bit(STATUS_INIT, &priv->status);
-
-	return 0;
-}
-
 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
 {
 	int idx = 0;
@@ -2092,52 +2039,3 @@ void iwlagn_remove_notification(struct iwl_priv *priv,
 	list_del(&wait_entry->list);
 	spin_unlock_bh(&priv->_agn.notif_wait_lock);
 }
-
-int iwlagn_start_device(struct iwl_priv *priv)
-{
-	int ret;
-
-	priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
-
-	if ((priv->cfg->sku & EEPROM_SKU_CAP_AMT_ENABLE) &&
-	     iwl_prepare_card_hw(priv)) {
-		IWL_WARN(priv, "Exit HW not ready\n");
-		return -EIO;
-	}
-
-	/* If platform's RF_KILL switch is NOT set to KILL */
-	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-
-	if (iwl_is_rfkill(priv)) {
-		wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
-		iwl_enable_interrupts(priv);
-		return -ERFKILL;
-	}
-
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
-	ret = iwlagn_hw_nic_init(priv);
-	if (ret) {
-		IWL_ERR(priv, "Unable to init nic\n");
-		return ret;
-	}
-
-	/* make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	/* clear (again), then enable host interrupts */
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(priv);
-
-	/* really make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-	return 0;
-}
-