diff options
| author | Johannes Berg <johannes.berg@intel.com> | 2011-11-25 11:11:43 -0800 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2011-11-28 14:44:25 -0500 |
| commit | c27bdc84d6310914cfdd59280c2e663588392d01 (patch) | |
| tree | 4a78bf8e3709c1596f413f8a84f6fa8c126e7bea /drivers/net/wireless/iwlwifi/iwl-2000.c | |
| parent | aed666e5e88a27f600187f960d306a028f4883ea (diff) | |
| download | op-kernel-dev-c27bdc84d6310914cfdd59280c2e663588392d01.zip op-kernel-dev-c27bdc84d6310914cfdd59280c2e663588392d01.tar.gz | |
iwlagn: remove calibration knowledge
The init microcode knows very well which calibrations
are required and sends us results for those that are.
Consequently, we can just send all of those to the RT
uCode again.
The problem with having the driver know about this is
that it is a uCode feature, not a hardware feature so
the config is completely unsuitable.
The only thing we need to check is whether the device
needs crystal calibration or not, add a new parameter
to the configuration for that.
This makes new uCode work on 6000 series devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-2000.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-2000.c | 14 |
1 files changed, 0 insertions, 14 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index b319357..0c4688d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -143,17 +143,7 @@ static int iwl2000_hw_set_hw_params(struct iwl_priv *priv) iwl2000_set_ct_threshold(priv); /* Set initial sensitivity parameters */ - /* Set initial calibration set */ hw_params(priv).sens = &iwl2000_sensitivity; - hw_params(priv).calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); - if (priv->cfg->need_dc_calib) - hw_params(priv).calib_rt_cfg |= IWL_CALIB_CFG_DC_IDX; - if (priv->cfg->need_temp_offset_calib) - hw_params(priv).calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET); return 0; } @@ -258,7 +248,6 @@ static struct iwl_bt_params iwl2030_bt_params = { .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .lib = &iwl2000_lib, \ .base_params = &iwl2000_base_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ @@ -286,7 +275,6 @@ struct iwl_cfg iwl2000_2bgn_d_cfg = { .lib = &iwl2030_lib, \ .base_params = &iwl2030_base_params, \ .bt_params = &iwl2030_bt_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ @@ -308,7 +296,6 @@ struct iwl_cfg iwl2030_2bgn_cfg = { .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .lib = &iwl2000_lib, \ .base_params = &iwl2000_base_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ @@ -338,7 +325,6 @@ struct iwl_cfg iwl105_bgn_d_cfg = { .lib = &iwl2030_lib, \ .base_params = &iwl2030_base_params, \ .bt_params = &iwl2030_bt_params, \ - .need_dc_calib = true, \ .need_temp_offset_calib = true, \ .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ |
