Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John Linville says:

====================
Here is another batch of updates intended for 3.6.  This includes a
number of pulls, including ones from the mac80211, iwlwifi, ath6kl, and
wl12xx trees.  I also pulled from the wireless tree to avoid potential
build conflicts.  There are a number of other patches applied directly,
including a number for the Broadcom drivers and the mwifiex driver.

The updates cover the usual variety of new hardware support and feature
enhancements.  It's all good work, but there aren't any big headliners.
This does resolve a net-next/wireless-next merge conflict reported
by Stephen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 25 insertions, 22 deletions

diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c
index 2f271c9..6633074 100644
--- a/drivers/net/wireless/iwlwifi/dvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -51,6 +51,9 @@
 #define IWL_CHANNEL_TUNE_TIME       5
 #define MAX_SCAN_CHANNEL	    50
 
+/* For reset radio, need minimal dwell time only */
+#define IWL_RADIO_RESET_DWELL_TIME	5
+
 static int iwl_send_scan_abort(struct iwl_priv *priv)
 {
 	int ret;
@@ -469,45 +472,39 @@ static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
 	return 0;
 }
 
-static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
-					   struct ieee80211_vif *vif,
-					   enum ieee80211_band band,
-					   struct iwl_scan_channel *scan_ch)
+static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv,
+					  struct ieee80211_vif *vif,
+					  enum ieee80211_band band,
+					  struct iwl_scan_channel *scan_ch)
 {
 	const struct ieee80211_supported_band *sband;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added = 0;
-	u16 channel = 0;
+	u16 channel;
 
 	sband = iwl_get_hw_mode(priv, band);
 	if (!sband) {
 		IWL_ERR(priv, "invalid band\n");
-		return added;
+		return 0;
 	}
 
-	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
 	channel = iwl_get_single_channel_number(priv, band);
 	if (channel) {
 		scan_ch->channel = cpu_to_le16(channel);
 		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		scan_ch->active_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+		scan_ch->passive_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
 		/* Set txpower levels to defaults */
 		scan_ch->dsp_atten = 110;
 		if (band == IEEE80211_BAND_5GHZ)
 			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 		else
 			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-		added++;
-	} else
-		IWL_ERR(priv, "no valid channel found\n");
-	return added;
+		return 1;
+	}
+
+	IWL_ERR(priv, "no valid channel found\n");
+	return 0;
 }
 
 static int iwl_get_channels_for_scan(struct iwl_priv *priv,
@@ -723,6 +720,12 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	switch (priv->scan_type) {
 	case IWL_SCAN_RADIO_RESET:
 		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+		/*
+		 * Override quiet time as firmware checks that active
+		 * dwell is >= quiet; since we use passive scan it'll
+		 * not actually be used.
+		 */
+		scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
 		break;
 	case IWL_SCAN_NORMAL:
 		if (priv->scan_request->n_ssids) {
@@ -896,7 +899,7 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	switch (priv->scan_type) {
 	case IWL_SCAN_RADIO_RESET:
 		scan->channel_count =
-			iwl_get_single_channel_for_scan(priv, vif, band,
+			iwl_get_channel_for_reset_scan(priv, vif, band,
 				(void *)&scan->data[cmd_len]);
 		break;
 	case IWL_SCAN_NORMAL: