[IWLWIFI]: add iwlwifi wireless drivers

This patch adds the mac80211 based wireless drivers for the Intel
PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi
Link AGN (4965) adapters.

[ Move driver into it's own directory -DaveM ]

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
new file mode 100644
index 0000000..25cfc6c
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -0,0 +1,128 @@
+config IWLWIFI
+	bool "Intel Wireless WiFi Link Drivers"
+	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	select FW_LOADER
+	default n
+	---help---
+	  Select to enable drivers based on the iwlwifi project.  This
+	  project provides a common foundation for Intel's wireless
+	  drivers designed to use the mac80211 subsystem.
+
+	  See <file:Documentation/networking/README.iwlwifi> for
+	  information on the capabilities currently enabled in this
+	  driver and for tips for debugging issues and problems.
+
+config IWLWIFI_DEBUG
+	bool "Enable full debugging output in iwlwifi drivers"
+	depends on IWLWIFI
+	default y
+	---help---
+	  This option will enable debug tracing output for the iwlwifi
+	  drivers.
+
+	  This will result in the kernel module being ~100k larger.  You can
+	  control which debug output is sent to the kernel log by setting the
+	  value in
+
+	          /sys/bus/pci/drivers/${DRIVER}/debug_level
+
+	  This entry will only exist if this option is enabled.
+
+	  To set a value, simply echo an 8-byte hex value to the same file:
+
+		  % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
+
+	  You can find the list of debug mask values in:
+		  drivers/net/wireless/mac80211/iwlwifi/iwl-debug.h
+
+	  If this is your first time using this driver, you should say Y here
+	  as the debug information can assist others in helping you resolve
+	  any problems you may encounter.
+
+config IWLWIFI_SENSITIVITY
+	bool "Enable Sensitivity Calibration in iwlwifi drivers"
+	depends on IWLWIFI
+	default y
+	---help---
+	  This option will enable sensitivity calibration for the iwlwifi
+	  drivers.
+
+config IWLWIFI_SPECTRUM_MEASUREMENT
+	bool "Enable Spectrum Measurement in iwlwifi drivers"
+	depends on IWLWIFI
+	default y
+	---help---
+	  This option will enable spectrum measurement for the iwlwifi drivers.
+
+config IWLWIFI_QOS
+	bool "Enable Wireless QoS in iwlwifi drivers"
+	depends on IWLWIFI
+	default y
+	---help---
+	  This option will enable wireless quality of service (QoS) for the
+	  iwlwifi drivers.
+
+config IWLWIFI_HT
+	bool "Enable 802.11n HT features in iwlwifi drivers"
+	depends on EXPERIMENTAL
+	depends on IWLWIFI && MAC80211_HT
+	default n
+	---help---
+	  This option enables IEEE 802.11n High Throughput features
+	  for the iwlwifi drivers.
+
+config IWL4965
+	tristate "Intel Wireless WiFi 4965AGN"
+	depends on m && IWLWIFI && EXPERIMENTAL
+	default m
+	---help---
+	  Select to build the driver supporting the:
+
+	  Intel Wireless WiFi Link 4965AGN
+
+	  This driver uses the kernel's mac80211 subsystem.
+
+	  See <file:Documentation/networking/README.iwlwifi> for
+	  information on the capabilities currently enabled in this
+	  driver and for tips for debugging any issues or problems.
+
+	  In order to use this driver, you will need a microcode (uCode)
+	  image for it. You can obtain the microcode from:
+
+	          <http://intellinuxwireless.org/>.
+
+	  See the above referenced README.iwlwifi for information on where
+	  to install the microcode images.
+
+	  If you want to compile the driver as a module ( = code which can be
+	  inserted in and remvoed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called iwl4965.ko.
+
+config IWL3945
+	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
+	depends on m && IWLWIFI && EXPERIMENTAL
+	default m
+	---help---
+	  Select to build the driver supporting the:
+
+	  Intel PRO/Wireless 3945ABG/BG Network Connection
+
+	  This driver uses the kernel's mac80211 subsystem.
+
+	  See <file:Documentation/networking/README.iwlwifi> for
+	  information on the capabilities currently enabled in this
+	  driver and for tips for debugging any issues or problems.
+
+	  In order to use this driver, you will need a microcode (uCode)
+	  image for it. You can obtain the microcode from:
+
+	          <http://intellinuxwireless.org/>.
+
+	  See the above referenced README.iwlwifi for information on where
+	  to install the microcode images.
+
+	  If you want to compile the driver as a module ( = code which can be
+	  inserted in and remvoed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called iwl3945.ko.