Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits)
  net: pack skb_shared_info more efficiently
  net_sched: red: split red_parms into parms and vars
  net_sched: sfq: extend limits
  cnic: Improve error recovery on bnx2x devices
  cnic: Re-init dev->stats_addr after chip reset
  net_sched: Bug in netem reordering
  bna: fix sparse warnings/errors
  bna: make ethtool_ops and strings const
  xgmac: cleanups
  net: make ethtool_ops const
  vmxnet3" make ethtool ops const
  xen-netback: make ops structs const
  virtio_net: Pass gfp flags when allocating rx buffers.
  ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call
  netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call
  igb: reset PHY after recovering from PHY power down
  igb: add basic runtime PM support
  igb: Add support for byte queue limits.
  e1000: cleanup CE4100 MDIO registers access
  e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove
  ...

1 files changed, 3976 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
new file mode 100644
index 0000000..54b2d39
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -0,0 +1,3976 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/ieee80211_radiotap.h>
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#define DRV_NAME	"iwl3945"
+
+#include "commands.h"
+#include "common.h"
+#include "3945.h"
+#include "iwl-spectrum.h"
+
+/*
+ * module name, copyright, version, etc.
+ */
+
+#define DRV_DESCRIPTION	\
+"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+/*
+ * add "s" to indicate spectrum measurement included.
+ * we add it here to be consistent with previous releases in which
+ * this was configurable.
+ */
+#define DRV_VERSION  IWLWIFI_VERSION VD "s"
+#define DRV_COPYRIGHT	"Copyright(c) 2003-2011 Intel Corporation"
+#define DRV_AUTHOR     "<ilw@linux.intel.com>"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+
+ /* module parameters */
+struct il_mod_params il3945_mod_params = {
+	.sw_crypto = 1,
+	.restart_fw = 1,
+	.disable_hw_scan = 1,
+	/* the rest are 0 by default */
+};
+
+/**
+ * il3945_get_antenna_flags - Get antenna flags for RXON command
+ * @il: eeprom and antenna fields are used to determine antenna flags
+ *
+ * il->eeprom39  is used to determine if antenna AUX/MAIN are reversed
+ * il3945_mod_params.antenna specifies the antenna diversity mode:
+ *
+ * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
+ * IL_ANTENNA_MAIN      - Force MAIN antenna
+ * IL_ANTENNA_AUX       - Force AUX antenna
+ */
+__le32
+il3945_get_antenna_flags(const struct il_priv *il)
+{
+	struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+
+	switch (il3945_mod_params.antenna) {
+	case IL_ANTENNA_DIVERSITY:
+		return 0;
+
+	case IL_ANTENNA_MAIN:
+		if (eeprom->antenna_switch_type)
+			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+
+	case IL_ANTENNA_AUX:
+		if (eeprom->antenna_switch_type)
+			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+	}
+
+	/* bad antenna selector value */
+	IL_ERR("Bad antenna selector value (0x%x)\n",
+	       il3945_mod_params.antenna);
+
+	return 0;		/* "diversity" is default if error */
+}
+
+static int
+il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
+				 struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+	unsigned long flags;
+	__le16 key_flags = 0;
+	int ret;
+
+	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
+	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+
+	if (sta_id == il->ctx.bcast_sta_id)
+		key_flags |= STA_KEY_MULTICAST_MSK;
+
+	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	keyconf->hw_key_idx = keyconf->keyidx;
+	key_flags &= ~STA_KEY_FLG_INVALID;
+
+	spin_lock_irqsave(&il->sta_lock, flags);
+	il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
+	il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+	memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
+
+	memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
+
+	if ((il->stations[sta_id].sta.key.
+	     key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
+		il->stations[sta_id].sta.key.key_offset =
+		    il_get_free_ucode_key_idx(il);
+	/* else, we are overriding an existing key => no need to allocated room
+	 * in uCode. */
+
+	WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+	     "no space for a new key");
+
+	il->stations[sta_id].sta.key.key_flags = key_flags;
+	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+	D_INFO("hwcrypto: modify ucode station key info\n");
+
+	ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
+
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+
+	return ret;
+}
+
+static int
+il3945_set_tkip_dynamic_key_info(struct il_priv *il,
+				 struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+	return -EOPNOTSUPP;
+}
+
+static int
+il3945_set_wep_dynamic_key_info(struct il_priv *il,
+				struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+	return -EOPNOTSUPP;
+}
+
+static int
+il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
+{
+	unsigned long flags;
+	struct il_addsta_cmd sta_cmd;
+
+	spin_lock_irqsave(&il->sta_lock, flags);
+	memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
+	memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
+	il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
+	il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	memcpy(&sta_cmd, &il->stations[sta_id].sta,
+	       sizeof(struct il_addsta_cmd));
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+
+	D_INFO("hwcrypto: clear ucode station key info\n");
+	return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+static int
+il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
+		       u8 sta_id)
+{
+	int ret = 0;
+
+	keyconf->hw_key_idx = HW_KEY_DYNAMIC;
+
+	switch (keyconf->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
+		break;
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
+		break;
+	default:
+		IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
+		ret = -EINVAL;
+	}
+
+	D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
+	      keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
+
+	return ret;
+}
+
+static int
+il3945_remove_static_key(struct il_priv *il)
+{
+	int ret = -EOPNOTSUPP;
+
+	return ret;
+}
+
+static int
+il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
+{
+	if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+	    key->cipher == WLAN_CIPHER_SUITE_WEP104)
+		return -EOPNOTSUPP;
+
+	IL_ERR("Static key invalid: cipher %x\n", key->cipher);
+	return -EINVAL;
+}
+
+static void
+il3945_clear_free_frames(struct il_priv *il)
+{
+	struct list_head *element;
+
+	D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
+
+	while (!list_empty(&il->free_frames)) {
+		element = il->free_frames.next;
+		list_del(element);
+		kfree(list_entry(element, struct il3945_frame, list));
+		il->frames_count--;
+	}
+
+	if (il->frames_count) {
+		IL_WARN("%d frames still in use.  Did we lose one?\n",
+			il->frames_count);
+		il->frames_count = 0;
+	}
+}
+
+static struct il3945_frame *
+il3945_get_free_frame(struct il_priv *il)
+{
+	struct il3945_frame *frame;
+	struct list_head *element;
+	if (list_empty(&il->free_frames)) {
+		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+		if (!frame) {
+			IL_ERR("Could not allocate frame!\n");
+			return NULL;
+		}
+
+		il->frames_count++;
+		return frame;
+	}
+
+	element = il->free_frames.next;
+	list_del(element);
+	return list_entry(element, struct il3945_frame, list);
+}
+
+static void
+il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
+{
+	memset(frame, 0, sizeof(*frame));
+	list_add(&frame->list, &il->free_frames);
+}
+
+unsigned int
+il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
+			 int left)
+{
+
+	if (!il_is_associated(il) || !il->beacon_skb)
+		return 0;
+
+	if (il->beacon_skb->len > left)
+		return 0;
+
+	memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
+
+	return il->beacon_skb->len;
+}
+
+static int
+il3945_send_beacon_cmd(struct il_priv *il)
+{
+	struct il3945_frame *frame;
+	unsigned int frame_size;
+	int rc;
+	u8 rate;
+
+	frame = il3945_get_free_frame(il);
+
+	if (!frame) {
+		IL_ERR("Could not obtain free frame buffer for beacon "
+		       "command.\n");
+		return -ENOMEM;
+	}
+
+	rate = il_get_lowest_plcp(il, &il->ctx);
+
+	frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
+
+	rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
+
+	il3945_free_frame(il, frame);
+
+	return rc;
+}
+
+static void
+il3945_unset_hw_params(struct il_priv *il)
+{
+	if (il->_3945.shared_virt)
+		dma_free_coherent(&il->pci_dev->dev,
+				  sizeof(struct il3945_shared),
+				  il->_3945.shared_virt, il->_3945.shared_phys);
+}
+
+static void
+il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
+			     struct il_device_cmd *cmd,
+			     struct sk_buff *skb_frag, int sta_id)
+{
+	struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
+	struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
+
+	tx_cmd->sec_ctl = 0;
+
+	switch (keyinfo->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
+		D_TX("tx_cmd with AES hwcrypto\n");
+		break;
+
+	case WLAN_CIPHER_SUITE_TKIP:
+		break;
+
+	case WLAN_CIPHER_SUITE_WEP104:
+		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+		/* fall through */
+	case WLAN_CIPHER_SUITE_WEP40:
+		tx_cmd->sec_ctl |=
+		    TX_CMD_SEC_WEP | (info->control.hw_key->
+				      hw_key_idx & TX_CMD_SEC_MSK) <<
+		    TX_CMD_SEC_SHIFT;
+
+		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
+
+		D_TX("Configuring packet for WEP encryption " "with key %d\n",
+		     info->control.hw_key->hw_key_idx);
+		break;
+
+	default:
+		IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
+		break;
+	}
+}
+
+/*
+ * handle build C_TX command notification.
+ */
+static void
+il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
+			  struct ieee80211_tx_info *info,
+			  struct ieee80211_hdr *hdr, u8 std_id)
+{
+	struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
+	__le32 tx_flags = tx_cmd->tx_flags;
+	__le16 fc = hdr->frame_control;
+
+	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+		tx_flags |= TX_CMD_FLG_ACK_MSK;
+		if (ieee80211_is_mgmt(fc))
+			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+		if (ieee80211_is_probe_resp(fc) &&
+		    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
+			tx_flags |= TX_CMD_FLG_TSF_MSK;
+	} else {
+		tx_flags &= (~TX_CMD_FLG_ACK_MSK);
+		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+	}
+
+	tx_cmd->sta_id = std_id;
+	if (ieee80211_has_morefrags(fc))
+		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
+
+	if (ieee80211_is_data_qos(fc)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tx_cmd->tid_tspec = qc[0] & 0xf;
+		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+	} else {
+		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+	}
+
+	il_tx_cmd_protection(il, info, fc, &tx_flags);
+
+	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
+	if (ieee80211_is_mgmt(fc)) {
+		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
+		else
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
+	} else {
+		tx_cmd->timeout.pm_frame_timeout = 0;
+	}
+
+	tx_cmd->driver_txop = 0;
+	tx_cmd->tx_flags = tx_flags;
+	tx_cmd->next_frame_len = 0;
+}
+
+/*
+ * start C_TX command process
+ */
+static int
+il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct il3945_tx_cmd *tx_cmd;
+	struct il_tx_queue *txq = NULL;
+	struct il_queue *q = NULL;
+	struct il_device_cmd *out_cmd;
+	struct il_cmd_meta *out_meta;
+	dma_addr_t phys_addr;
+	dma_addr_t txcmd_phys;
+	int txq_id = skb_get_queue_mapping(skb);
+	u16 len, idx, hdr_len;
+	u8 id;
+	u8 unicast;
+	u8 sta_id;
+	u8 tid = 0;
+	__le16 fc;
+	u8 wait_write_ptr = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&il->lock, flags);
+	if (il_is_rfkill(il)) {
+		D_DROP("Dropping - RF KILL\n");
+		goto drop_unlock;
+	}
+
+	if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
+	    IL_INVALID_RATE) {
+		IL_ERR("ERROR: No TX rate available.\n");
+		goto drop_unlock;
+	}
+
+	unicast = !is_multicast_ether_addr(hdr->addr1);
+	id = 0;
+
+	fc = hdr->frame_control;
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+	if (ieee80211_is_auth(fc))
+		D_TX("Sending AUTH frame\n");
+	else if (ieee80211_is_assoc_req(fc))
+		D_TX("Sending ASSOC frame\n");
+	else if (ieee80211_is_reassoc_req(fc))
+		D_TX("Sending REASSOC frame\n");
+#endif
+
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	hdr_len = ieee80211_hdrlen(fc);
+
+	/* Find idx into station table for destination station */
+	sta_id = il_sta_id_or_broadcast(il, &il->ctx, info->control.sta);
+	if (sta_id == IL_INVALID_STATION) {
+		D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
+		goto drop;
+	}
+
+	D_RATE("station Id %d\n", sta_id);
+
+	if (ieee80211_is_data_qos(fc)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+		if (unlikely(tid >= MAX_TID_COUNT))
+			goto drop;
+	}
+
+	/* Descriptor for chosen Tx queue */
+	txq = &il->txq[txq_id];
+	q = &txq->q;
+
+	if ((il_queue_space(q) < q->high_mark))
+		goto drop;
+
+	spin_lock_irqsave(&il->lock, flags);
+
+	idx = il_get_cmd_idx(q, q->write_ptr, 0);
+
+	/* Set up driver data for this TFD */
+	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct il_tx_info));
+	txq->txb[q->write_ptr].skb = skb;
+	txq->txb[q->write_ptr].ctx = &il->ctx;
+
+	/* Init first empty entry in queue's array of Tx/cmd buffers */
+	out_cmd = txq->cmd[idx];
+	out_meta = &txq->meta[idx];
+	tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
+	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
+	memset(tx_cmd, 0, sizeof(*tx_cmd));
+
+	/*
+	 * Set up the Tx-command (not MAC!) header.
+	 * Store the chosen Tx queue and TFD idx within the sequence field;
+	 * after Tx, uCode's Tx response will return this value so driver can
+	 * locate the frame within the tx queue and do post-tx processing.
+	 */
+	out_cmd->hdr.cmd = C_TX;
+	out_cmd->hdr.sequence =
+	    cpu_to_le16((u16)
+			(QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
+
+	/* Copy MAC header from skb into command buffer */
+	memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+	if (info->control.hw_key)
+		il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
+
+	/* TODO need this for burst mode later on */
+	il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
+
+	il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
+
+	/* Total # bytes to be transmitted */
+	len = (u16) skb->len;
+	tx_cmd->len = cpu_to_le16(len);
+
+	il_dbg_log_tx_data_frame(il, len, hdr);
+	il_update_stats(il, true, fc, len);
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+	if (!ieee80211_has_morefrags(hdr->frame_control)) {
+		txq->need_update = 1;
+	} else {
+		wait_write_ptr = 1;
+		txq->need_update = 0;
+	}
+
+	D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
+	D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
+	il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
+	il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
+			  ieee80211_hdrlen(fc));
+
+	/*
+	 * Use the first empty entry in this queue's command buffer array
+	 * to contain the Tx command and MAC header concatenated together
+	 * (payload data will be in another buffer).
+	 * Size of this varies, due to varying MAC header length.
+	 * If end is not dword aligned, we'll have 2 extra bytes at the end
+	 * of the MAC header (device reads on dword boundaries).
+	 * We'll tell device about this padding later.
+	 */
+	len =
+	    sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
+	    hdr_len;
+	len = (len + 3) & ~3;
+
+	/* Physical address of this Tx command's header (not MAC header!),
+	 * within command buffer array. */
+	txcmd_phys =
+	    pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE);
+	/* we do not map meta data ... so we can safely access address to
+	 * provide to unmap command*/
+	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
+	dma_unmap_len_set(out_meta, len, len);
+
+	/* Add buffer containing Tx command and MAC(!) header to TFD's
+	 * first entry */
+	il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1,
+						 0);
+
+	/* Set up TFD's 2nd entry to point directly to remainder of skb,
+	 * if any (802.11 null frames have no payload). */
+	len = skb->len - hdr_len;
+	if (len) {
+		phys_addr =
+		    pci_map_single(il->pci_dev, skb->data + hdr_len, len,
+				   PCI_DMA_TODEVICE);
+		il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq, phys_addr,
+							 len, 0, U32_PAD(len));
+	}
+
+	/* Tell device the write idx *just past* this latest filled TFD */
+	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
+	il_txq_update_write_ptr(il, txq);
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
+		if (wait_write_ptr) {
+			spin_lock_irqsave(&il->lock, flags);
+			txq->need_update = 1;
+			il_txq_update_write_ptr(il, txq);
+			spin_unlock_irqrestore(&il->lock, flags);
+		}
+
+		il_stop_queue(il, txq);
+	}
+
+	return 0;
+
+drop_unlock:
+	spin_unlock_irqrestore(&il->lock, flags);
+drop:
+	return -1;
+}
+
+static int
+il3945_get_measurement(struct il_priv *il,
+		       struct ieee80211_measurement_params *params, u8 type)
+{
+	struct il_spectrum_cmd spectrum;
+	struct il_rx_pkt *pkt;
+	struct il_host_cmd cmd = {
+		.id = C_SPECTRUM_MEASUREMENT,
+		.data = (void *)&spectrum,
+		.flags = CMD_WANT_SKB,
+	};
+	u32 add_time = le64_to_cpu(params->start_time);
+	int rc;
+	int spectrum_resp_status;
+	int duration = le16_to_cpu(params->duration);
+	struct il_rxon_context *ctx = &il->ctx;
+
+	if (il_is_associated(il))
+		add_time =
+		    il_usecs_to_beacons(il,
+					le64_to_cpu(params->start_time) -
+					il->_3945.last_tsf,
+					le16_to_cpu(ctx->timing.
+						    beacon_interval));
+
+	memset(&spectrum, 0, sizeof(spectrum));
+
+	spectrum.channel_count = cpu_to_le16(1);
+	spectrum.flags =
+	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
+	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
+	cmd.len = sizeof(spectrum);
+	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
+
+	if (il_is_associated(il))
+		spectrum.start_time =
+		    il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
+				       le16_to_cpu(ctx->timing.
+						   beacon_interval));
+	else
+		spectrum.start_time = 0;
+
+	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
+	spectrum.channels[0].channel = params->channel;
+	spectrum.channels[0].type = type;
+	if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
+		spectrum.flags |=
+		    RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
+		    RXON_FLG_TGG_PROTECT_MSK;
+
+	rc = il_send_cmd_sync(il, &cmd);
+	if (rc)
+		return rc;
+
+	pkt = (struct il_rx_pkt *)cmd.reply_page;
+	if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+		IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
+		rc = -EIO;
+	}
+
+	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
+	switch (spectrum_resp_status) {
+	case 0:		/* Command will be handled */
+		if (pkt->u.spectrum.id != 0xff) {
+			D_INFO("Replaced existing measurement: %d\n",
+			       pkt->u.spectrum.id);
+			il->measurement_status &= ~MEASUREMENT_READY;
+		}
+		il->measurement_status |= MEASUREMENT_ACTIVE;
+		rc = 0;
+		break;
+
+	case 1:		/* Command will not be handled */
+		rc = -EAGAIN;
+		break;
+	}
+
+	il_free_pages(il, cmd.reply_page);
+
+	return rc;
+}
+
+static void
+il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_alive_resp *palive;
+	struct delayed_work *pwork;
+
+	palive = &pkt->u.alive_frame;
+
+	D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
+	       palive->is_valid, palive->ver_type, palive->ver_subtype);
+
+	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
+		D_INFO("Initialization Alive received.\n");
+		memcpy(&il->card_alive_init, &pkt->u.alive_frame,
+		       sizeof(struct il_alive_resp));
+		pwork = &il->init_alive_start;
+	} else {
+		D_INFO("Runtime Alive received.\n");
+		memcpy(&il->card_alive, &pkt->u.alive_frame,
+		       sizeof(struct il_alive_resp));
+		pwork = &il->alive_start;
+		il3945_disable_events(il);
+	}
+
+	/* We delay the ALIVE response by 5ms to
+	 * give the HW RF Kill time to activate... */
+	if (palive->is_valid == UCODE_VALID_OK)
+		queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
+	else
+		IL_WARN("uCode did not respond OK.\n");
+}
+
+static void
+il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+#endif
+
+	D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
+}
+
+static void
+il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
+#ifdef CONFIG_IWLEGACY_DEBUG
+	u8 rate = beacon->beacon_notify_hdr.rate;
+
+	D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
+	     le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
+	     beacon->beacon_notify_hdr.failure_frame,
+	     le32_to_cpu(beacon->ibss_mgr_status),
+	     le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+	il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static void
+il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
+	unsigned long status = il->status;
+
+	IL_WARN("Card state received: HW:%s SW:%s\n",
+		(flags & HW_CARD_DISABLED) ? "Kill" : "On",
+		(flags & SW_CARD_DISABLED) ? "Kill" : "On");
+
+	_il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	if (flags & HW_CARD_DISABLED)
+		set_bit(S_RF_KILL_HW, &il->status);
+	else
+		clear_bit(S_RF_KILL_HW, &il->status);
+
+	il_scan_cancel(il);
+
+	if ((test_bit(S_RF_KILL_HW, &status) !=
+	     test_bit(S_RF_KILL_HW, &il->status)))
+		wiphy_rfkill_set_hw_state(il->hw->wiphy,
+					  test_bit(S_RF_KILL_HW, &il->status));
+	else
+		wake_up(&il->wait_command_queue);
+}
+
+/**
+ * il3945_setup_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ *
+ * This function chains into the hardware specific files for them to setup
+ * any hardware specific handlers as well.
+ */
+static void
+il3945_setup_handlers(struct il_priv *il)
+{
+	il->handlers[N_ALIVE] = il3945_hdl_alive;
+	il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
+	il->handlers[N_ERROR] = il_hdl_error;
+	il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
+	il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
+	il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
+	il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
+	il->handlers[N_BEACON] = il3945_hdl_beacon;
+
+	/*
+	 * The same handler is used for both the REPLY to a discrete
+	 * stats request from the host as well as for the periodic
+	 * stats notifications (after received beacons) from the uCode.
+	 */
+	il->handlers[C_STATS] = il3945_hdl_c_stats;
+	il->handlers[N_STATS] = il3945_hdl_stats;
+
+	il_setup_rx_scan_handlers(il);
+	il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
+
+	/* Set up hardware specific Rx handlers */
+	il3945_hw_handler_setup(il);
+}
+
+/************************** RX-FUNCTIONS ****************************/
+/*
+ * Rx theory of operation
+ *
+ * The host allocates 32 DMA target addresses and passes the host address
+ * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
+ * 0 to 31
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two idx registers for managing the Rx buffers.
+ *
+ * The READ idx maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ idx is managed by the firmware once the card is enabled.
+ *
+ * The WRITE idx maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * IDX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ idx
+ * and fire the RX interrupt.  The driver can then query the READ idx and
+ * process as many packets as possible, moving the WRITE idx forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
+ *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ *   to replenish the iwl->rxq->rx_free.
+ * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
+ *   iwl->rxq is replenished and the READ IDX is updated (updating the
+ *   'processed' and 'read' driver idxes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
+ *   were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * il3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
+ *                            il3945_rx_queue_restock
+ * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
+ *                            queue, updates firmware pointers, and updates
+ *                            the WRITE idx.  If insufficient rx_free buffers
+ *                            are available, schedules il3945_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - il3945_rx()         Detach il_rx_bufs from pool up to the
+ *                            READ IDX, detaching the SKB from the pool.
+ *                            Moves the packet buffer from queue to rx_used.
+ *                            Calls il3945_rx_queue_restock to refill any empty
+ *                            slots.
+ * ...
+ *
+ */
+
+/**
+ * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32
+il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
+{
+	return cpu_to_le32((u32) dma_addr);
+}
+
+/**
+ * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' idx forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void
+il3945_rx_queue_restock(struct il_priv *il)
+{
+	struct il_rx_queue *rxq = &il->rxq;
+	struct list_head *element;
+	struct il_rx_buf *rxb;
+	unsigned long flags;
+	int write;
+
+	spin_lock_irqsave(&rxq->lock, flags);
+	write = rxq->write & ~0x7;
+	while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
+		/* Get next free Rx buffer, remove from free list */
+		element = rxq->rx_free.next;
+		rxb = list_entry(element, struct il_rx_buf, list);
+		list_del(element);
+
+		/* Point to Rx buffer via next RBD in circular buffer */
+		rxq->bd[rxq->write] =
+		    il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
+		rxq->queue[rxq->write] = rxb;
+		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+		rxq->free_count--;
+	}
+	spin_unlock_irqrestore(&rxq->lock, flags);
+	/* If the pre-allocated buffer pool is dropping low, schedule to
+	 * refill it */
+	if (rxq->free_count <= RX_LOW_WATERMARK)
+		queue_work(il->workqueue, &il->rx_replenish);
+
+	/* If we've added more space for the firmware to place data, tell it.
+	 * Increment device's write pointer in multiples of 8. */
+	if (rxq->write_actual != (rxq->write & ~0x7) ||
+	    abs(rxq->write - rxq->read) > 7) {
+		spin_lock_irqsave(&rxq->lock, flags);
+		rxq->need_update = 1;
+		spin_unlock_irqrestore(&rxq->lock, flags);
+		il_rx_queue_update_write_ptr(il, rxq);
+	}
+}
+
+/**
+ * il3945_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via il3945_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void
+il3945_rx_allocate(struct il_priv *il, gfp_t priority)
+{
+	struct il_rx_queue *rxq = &il->rxq;
+	struct list_head *element;
+	struct il_rx_buf *rxb;
+	struct page *page;
+	unsigned long flags;
+	gfp_t gfp_mask = priority;
+
+	while (1) {
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			return;
+		}
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		if (rxq->free_count > RX_LOW_WATERMARK)
+			gfp_mask |= __GFP_NOWARN;
+
+		if (il->hw_params.rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
+		/* Alloc a new receive buffer */
+		page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
+		if (!page) {
+			if (net_ratelimit())
+				D_INFO("Failed to allocate SKB buffer.\n");
+			if (rxq->free_count <= RX_LOW_WATERMARK &&
+			    net_ratelimit())
+				IL_ERR("Failed to allocate SKB buffer with %0x."
+				       "Only %u free buffers remaining.\n",
+				       priority, rxq->free_count);
+			/* We don't reschedule replenish work here -- we will
+			 * call the restock method and if it still needs
+			 * more buffers it will schedule replenish */
+			break;
+		}
+
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			__free_pages(page, il->hw_params.rx_page_order);
+			return;
+		}
+		element = rxq->rx_used.next;
+		rxb = list_entry(element, struct il_rx_buf, list);
+		list_del(element);
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		rxb->page = page;
+		/* Get physical address of RB/SKB */
+		rxb->page_dma =
+		    pci_map_page(il->pci_dev, page, 0,
+				 PAGE_SIZE << il->hw_params.rx_page_order,
+				 PCI_DMA_FROMDEVICE);
+
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		list_add_tail(&rxb->list, &rxq->rx_free);
+		rxq->free_count++;
+		il->alloc_rxb_page++;
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+	}
+}
+
+void
+il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
+{
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&rxq->lock, flags);
+	INIT_LIST_HEAD(&rxq->rx_free);
+	INIT_LIST_HEAD(&rxq->rx_used);
+	/* Fill the rx_used queue with _all_ of the Rx buffers */
+	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+		/* In the reset function, these buffers may have been allocated
+		 * to an SKB, so we need to unmap and free potential storage */
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+				       PAGE_SIZE << il->hw_params.rx_page_order,
+				       PCI_DMA_FROMDEVICE);
+			__il_free_pages(il, rxq->pool[i].page);
+			rxq->pool[i].page = NULL;
+		}
+		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+	}
+
+	/* Set us so that we have processed and used all buffers, but have
+	 * not restocked the Rx queue with fresh buffers */
+	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
+	rxq->free_count = 0;
+	spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+void
+il3945_rx_replenish(void *data)
+{
+	struct il_priv *il = data;
+	unsigned long flags;
+
+	il3945_rx_allocate(il, GFP_KERNEL);
+
+	spin_lock_irqsave(&il->lock, flags);
+	il3945_rx_queue_restock(il);
+	spin_unlock_irqrestore(&il->lock, flags);
+}
+
+static void
+il3945_rx_replenish_now(struct il_priv *il)
+{
+	il3945_rx_allocate(il, GFP_ATOMIC);
+
+	il3945_rx_queue_restock(il);
+}
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void
+il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
+{
+	int i;
+	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+				       PAGE_SIZE << il->hw_params.rx_page_order,
+				       PCI_DMA_FROMDEVICE);
+			__il_free_pages(il, rxq->pool[i].page);
+			rxq->pool[i].page = NULL;
+		}
+	}
+
+	dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			  rxq->bd_dma);
+	dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
+			  rxq->rb_stts, rxq->rb_stts_dma);
+	rxq->bd = NULL;
+	rxq->rb_stts = NULL;
+}
+
+/* Convert linear signal-to-noise ratio into dB */
+static u8 ratio2dB[100] = {
+/*	 0   1   2   3   4   5   6   7   8   9 */
+	0, 0, 6, 10, 12, 14, 16, 17, 18, 19,	/* 00 - 09 */
+	20, 21, 22, 22, 23, 23, 24, 25, 26, 26,	/* 10 - 19 */
+	26, 26, 26, 27, 27, 28, 28, 28, 29, 29,	/* 20 - 29 */
+	29, 30, 30, 30, 31, 31, 31, 31, 32, 32,	/* 30 - 39 */
+	32, 32, 32, 33, 33, 33, 33, 33, 34, 34,	/* 40 - 49 */
+	34, 34, 34, 34, 35, 35, 35, 35, 35, 35,	/* 50 - 59 */
+	36, 36, 36, 36, 36, 36, 36, 37, 37, 37,	/* 60 - 69 */
+	37, 37, 37, 37, 37, 38, 38, 38, 38, 38,	/* 70 - 79 */
+	38, 38, 38, 38, 38, 39, 39, 39, 39, 39,	/* 80 - 89 */
+	39, 39, 39, 39, 39, 40, 40, 40, 40, 40	/* 90 - 99 */
+};
+
+/* Calculates a relative dB value from a ratio of linear
+ *   (i.e. not dB) signal levels.
+ * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
+int
+il3945_calc_db_from_ratio(int sig_ratio)
+{
+	/* 1000:1 or higher just report as 60 dB */
+	if (sig_ratio >= 1000)
+		return 60;
+
+	/* 100:1 or higher, divide by 10 and use table,
+	 *   add 20 dB to make up for divide by 10 */
+	if (sig_ratio >= 100)
+		return 20 + (int)ratio2dB[sig_ratio / 10];
+
+	/* We shouldn't see this */
+	if (sig_ratio < 1)
+		return 0;
+
+	/* Use table for ratios 1:1 - 99:1 */
+	return (int)ratio2dB[sig_ratio];
+}
+
+/**
+ * il3945_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the il->handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+static void
+il3945_rx_handle(struct il_priv *il)
+{
+	struct il_rx_buf *rxb;
+	struct il_rx_pkt *pkt;
+	struct il_rx_queue *rxq = &il->rxq;
+	u32 r, i;
+	int reclaim;
+	unsigned long flags;
+	u8 fill_rx = 0;
+	u32 count = 8;
+	int total_empty = 0;
+
+	/* uCode's read idx (stored in shared DRAM) indicates the last Rx
+	 * buffer that the driver may process (last buffer filled by ucode). */
+	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
+	i = rxq->read;
+
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - rxq->write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
+		fill_rx = 1;
+	/* Rx interrupt, but nothing sent from uCode */
+	if (i == r)
+		D_RX("r = %d, i = %d\n", r, i);
+
+	while (i != r) {
+		int len;
+
+		rxb = rxq->queue[i];
+
+		/* If an RXB doesn't have a Rx queue slot associated with it,
+		 * then a bug has been introduced in the queue refilling
+		 * routines -- catch it here */
+		BUG_ON(rxb == NULL);
+
+		rxq->queue[i] = NULL;
+
+		pci_unmap_page(il->pci_dev, rxb->page_dma,
+			       PAGE_SIZE << il->hw_params.rx_page_order,
+			       PCI_DMA_FROMDEVICE);
+		pkt = rxb_addr(rxb);
+
+		len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
+		len += sizeof(u32);	/* account for status word */
+
+		/* Reclaim a command buffer only if this packet is a response
+		 *   to a (driver-originated) command.
+		 * If the packet (e.g. Rx frame) originated from uCode,
+		 *   there is no command buffer to reclaim.
+		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+		 *   but apparently a few don't get set; catch them here. */
+		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+		    pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX;
+
+		/* Based on type of command response or notification,
+		 *   handle those that need handling via function in
+		 *   handlers table.  See il3945_setup_handlers() */
+		if (il->handlers[pkt->hdr.cmd]) {
+			D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
+			     il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+			il->isr_stats.handlers[pkt->hdr.cmd]++;
+			il->handlers[pkt->hdr.cmd] (il, rxb);
+		} else {
+			/* No handling needed */
+			D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
+			     i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+		}
+
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some handler might have
+		 * already taken or freed the pages.
+		 */
+
+		if (reclaim) {
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking il_send_cmd()
+			 * as we reclaim the driver command queue */
+			if (rxb->page)
+				il_tx_cmd_complete(il, rxb);
+			else
+				IL_WARN("Claim null rxb?\n");
+		}
+
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (rxb->page != NULL) {
+			rxb->page_dma =
+			    pci_map_page(il->pci_dev, rxb->page, 0,
+					 PAGE_SIZE << il->hw_params.
+					 rx_page_order, PCI_DMA_FROMDEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		i = (i + 1) & RX_QUEUE_MASK;
+		/* If there are a lot of unused frames,
+		 * restock the Rx queue so ucode won't assert. */
+		if (fill_rx) {
+			count++;
+			if (count >= 8) {
+				rxq->read = i;
+				il3945_rx_replenish_now(il);
+				count = 0;
+			}
+		}
+	}
+
+	/* Backtrack one entry */
+	rxq->read = i;
+	if (fill_rx)
+		il3945_rx_replenish_now(il);
+	else
+		il3945_rx_queue_restock(il);
+}
+
+/* call this function to flush any scheduled tasklet */
+static inline void
+il3945_synchronize_irq(struct il_priv *il)
+{
+	/* wait to make sure we flush pending tasklet */
+	synchronize_irq(il->pci_dev->irq);
+	tasklet_kill(&il->irq_tasklet);
+}
+
+static const char *
+il3945_desc_lookup(int i)
+{
+	switch (i) {
+	case 1:
+		return "FAIL";
+	case 2:
+		return "BAD_PARAM";
+	case 3:
+		return "BAD_CHECKSUM";
+	case 4:
+		return "NMI_INTERRUPT";
+	case 5:
+		return "SYSASSERT";
+	case 6:
+		return "FATAL_ERROR";
+	}
+
+	return "UNKNOWN";
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+void
+il3945_dump_nic_error_log(struct il_priv *il)
+{
+	u32 i;
+	u32 desc, time, count, base, data1;
+	u32 blink1, blink2, ilink1, ilink2;
+
+	base = le32_to_cpu(il->card_alive.error_event_table_ptr);
+
+	if (!il3945_hw_valid_rtc_data_addr(base)) {
+		IL_ERR("Not valid error log pointer 0x%08X\n", base);
+		return;
+	}
+
+	count = il_read_targ_mem(il, base);
+
+	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+		IL_ERR("Start IWL Error Log Dump:\n");
+		IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
+	}
+
+	IL_ERR("Desc       Time       asrtPC  blink2 "
+	       "ilink1  nmiPC   Line\n");
+	for (i = ERROR_START_OFFSET;
+	     i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
+	     i += ERROR_ELEM_SIZE) {
+		desc = il_read_targ_mem(il, base + i);
+		time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
+		blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
+		blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
+		ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
+		ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
+		data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
+
+		IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
+		       il3945_desc_lookup(desc), desc, time, blink1, blink2,
+		       ilink1, ilink2, data1);
+	}
+}
+
+static void
+il3945_irq_tasklet(struct il_priv *il)
+{
+	u32 inta, handled = 0;
+	u32 inta_fh;
+	unsigned long flags;
+#ifdef CONFIG_IWLEGACY_DEBUG
+	u32 inta_mask;
+#endif
+
+	spin_lock_irqsave(&il->lock, flags);
+
+	/* Ack/clear/reset pending uCode interrupts.
+	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
+	inta = _il_rd(il, CSR_INT);
+	_il_wr(il, CSR_INT, inta);
+
+	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
+	 * Any new interrupts that happen after this, either while we're
+	 * in this tasklet, or later, will show up in next ISR/tasklet. */
+	inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+	_il_wr(il, CSR_FH_INT_STATUS, inta_fh);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+	if (il_get_debug_level(il) & IL_DL_ISR) {
+		/* just for debug */
+		inta_mask = _il_rd(il, CSR_INT_MASK);
+		D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
+		      inta_mask, inta_fh);
+	}
+#endif
+
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
+	 * atomic, make sure that inta covers all the interrupts that
+	 * we've discovered, even if FH interrupt came in just after
+	 * reading CSR_INT. */
+	if (inta_fh & CSR39_FH_INT_RX_MASK)
+		inta |= CSR_INT_BIT_FH_RX;
+	if (inta_fh & CSR39_FH_INT_TX_MASK)
+		inta |= CSR_INT_BIT_FH_TX;
+
+	/* Now service all interrupt bits discovered above. */
+	if (inta & CSR_INT_BIT_HW_ERR) {
+		IL_ERR("Hardware error detected.  Restarting.\n");
+
+		/* Tell the device to stop sending interrupts */
+		il_disable_interrupts(il);
+
+		il->isr_stats.hw++;
+		il_irq_handle_error(il);
+
+		handled |= CSR_INT_BIT_HW_ERR;
+
+		return;
+	}
+#ifdef CONFIG_IWLEGACY_DEBUG
+	if (il_get_debug_level(il) & (IL_DL_ISR)) {
+		/* NIC fires this, but we don't use it, redundant with WAKEUP */
+		if (inta & CSR_INT_BIT_SCD) {
+			D_ISR("Scheduler finished to transmit "
+			      "the frame/frames.\n");
+			il->isr_stats.sch++;
+		}
+
+		/* Alive notification via Rx interrupt will do the real work */
+		if (inta & CSR_INT_BIT_ALIVE) {
+			D_ISR("Alive interrupt\n");
+			il->isr_stats.alive++;
+		}
+	}
+#endif
+	/* Safely ignore these bits for debug checks below */
+	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+	/* Error detected by uCode */
+	if (inta & CSR_INT_BIT_SW_ERR) {
+		IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
+		       inta);
+		il->isr_stats.sw++;
+		il_irq_handle_error(il);
+		handled |= CSR_INT_BIT_SW_ERR;
+	}
+
+	/* uCode wakes up after power-down sleep */
+	if (inta & CSR_INT_BIT_WAKEUP) {
+		D_ISR("Wakeup interrupt\n");
+		il_rx_queue_update_write_ptr(il, &il->rxq);
+		il_txq_update_write_ptr(il, &il->txq[0]);
+		il_txq_update_write_ptr(il, &il->txq[1]);
+		il_txq_update_write_ptr(il, &il->txq[2]);
+		il_txq_update_write_ptr(il, &il->txq[3]);
+		il_txq_update_write_ptr(il, &il->txq[4]);
+		il_txq_update_write_ptr(il, &il->txq[5]);
+
+		il->isr_stats.wakeup++;
+		handled |= CSR_INT_BIT_WAKEUP;
+	}
+
+	/* All uCode command responses, including Tx command responses,
+	 * Rx "responses" (frame-received notification), and other
+	 * notifications from uCode come through here*/
+	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+		il3945_rx_handle(il);
+		il->isr_stats.rx++;
+		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+	}
+
+	if (inta & CSR_INT_BIT_FH_TX) {
+		D_ISR("Tx interrupt\n");
+		il->isr_stats.tx++;
+
+		_il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
+		il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
+		handled |= CSR_INT_BIT_FH_TX;
+	}
+
+	if (inta & ~handled) {
+		IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		il->isr_stats.unhandled++;
+	}
+
+	if (inta & ~il->inta_mask) {
+		IL_WARN("Disabled INTA bits 0x%08x were pending\n",
+			inta & ~il->inta_mask);
+		IL_WARN("   with inta_fh = 0x%08x\n", inta_fh);
+	}
+
+	/* Re-enable all interrupts */
+	/* only Re-enable if disabled by irq */
+	if (test_bit(S_INT_ENABLED, &il->status))
+		il_enable_interrupts(il);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+	if (il_get_debug_level(il) & (IL_DL_ISR)) {
+		inta = _il_rd(il, CSR_INT);
+		inta_mask = _il_rd(il, CSR_INT_MASK);
+		inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+		D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+		      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
+	}
+#endif
+}
+
+static int
+il3945_get_channels_for_scan(struct il_priv *il, enum ieee80211_band band,
+			     u8 is_active, u8 n_probes,
+			     struct il3945_scan_channel *scan_ch,
+			     struct ieee80211_vif *vif)
+{
+	struct ieee80211_channel *chan;
+	const struct ieee80211_supported_band *sband;
+	const struct il_channel_info *ch_info;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added, i;
+
+	sband = il_get_hw_mode(il, band);
+	if (!sband)
+		return 0;
+
+	active_dwell = il_get_active_dwell_time(il, band, n_probes);
+	passive_dwell = il_get_passive_dwell_time(il, band, vif);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
+		chan = il->scan_request->channels[i];
+
+		if (chan->band != band)
+			continue;
+
+		scan_ch->channel = chan->hw_value;
+
+		ch_info = il_get_channel_info(il, band, scan_ch->channel);
+		if (!il_is_channel_valid(ch_info)) {
+			D_SCAN("Channel %d is INVALID for this band.\n",
+			       scan_ch->channel);
+			continue;
+		}
+
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* If passive , set up for auto-switch
+		 *  and use long active_dwell time.
+		 */
+		if (!is_active || il_is_channel_passive(ch_info) ||
+		    (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+			scan_ch->type = 0;	/* passive */
+			if (IL_UCODE_API(il->ucode_ver) == 1)
+				scan_ch->active_dwell =
+				    cpu_to_le16(passive_dwell - 1);
+		} else {
+			scan_ch->type = 1;	/* active */
+		}
+
+		/* Set direct probe bits. These may be used both for active
+		 * scan channels (probes gets sent right away),
+		 * or for passive channels (probes get se sent only after
+		 * hearing clear Rx packet).*/
+		if (IL_UCODE_API(il->ucode_ver) >= 2) {
+			if (n_probes)
+				scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
+		} else {
+			/* uCode v1 does not allow setting direct probe bits on
+			 * passive channel. */
+			if ((scan_ch->type & 1) && n_probes)
+				scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
+		}
+
+		/* Set txpower levels to defaults */
+		scan_ch->tpc.dsp_atten = 110;
+		/* scan_pwr_info->tpc.dsp_atten; */
+
+		/*scan_pwr_info->tpc.tx_gain; */
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else {
+			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+			 * power level:
+			 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
+			 */
+		}
+
+		D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
+		       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
+		       (scan_ch->type & 1) ? active_dwell : passive_dwell);
+
+		scan_ch++;
+		added++;
+	}
+
+	D_SCAN("total channels to scan %d\n", added);
+	return added;
+}
+
+static void
+il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
+{
+	int i;
+
+	for (i = 0; i < RATE_COUNT_LEGACY; i++) {
+		rates[i].bitrate = il3945_rates[i].ieee * 5;
+		rates[i].hw_value = i;	/* Rate scaling will work on idxes */
+		rates[i].hw_value_short = i;
+		rates[i].flags = 0;
+		if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
+			/*
+			 * If CCK != 1M then set short preamble rate flag.
+			 */
+			rates[i].flags |=
+			    (il3945_rates[i].plcp ==
+			     10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
+		}
+	}
+}
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static void
+il3945_dealloc_ucode_pci(struct il_priv *il)
+{
+	il_free_fw_desc(il->pci_dev, &il->ucode_code);
+	il_free_fw_desc(il->pci_dev, &il->ucode_data);
+	il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
+	il_free_fw_desc(il->pci_dev, &il->ucode_init);
+	il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
+	il_free_fw_desc(il->pci_dev, &il->ucode_boot);
+}
+
+/**
+ * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
+ *     looking at all data.
+ */
+static int
+il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
+{
+	u32 val;
+	u32 save_len = len;
+	int rc = 0;
+	u32 errcnt;
+
+	D_INFO("ucode inst image size is %u\n", len);
+
+	il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
+
+	errcnt = 0;
+	for (; len > 0; len -= sizeof(u32), image++) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IL_DL_IO is set */
+		val = _il_rd(il, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+			IL_ERR("uCode INST section is invalid at "
+			       "offset 0x%x, is 0x%x, s/b 0x%x\n",
+			       save_len - len, val, le32_to_cpu(*image));
+			rc = -EIO;
+			errcnt++;
+			if (errcnt >= 20)
+				break;
+		}
+	}
+
+	if (!errcnt)
+		D_INFO("ucode image in INSTRUCTION memory is good\n");
+
+	return rc;
+}
+
+/**
+ * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
+ *   using sample data 100 bytes apart.  If these sample points are good,
+ *   it's a pretty good bet that everything between them is good, too.
+ */
+static int
+il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
+{
+	u32 val;
+	int rc = 0;
+	u32 errcnt = 0;
+	u32 i;
+
+	D_INFO("ucode inst image size is %u\n", len);
+
+	for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IL_DL_IO is set */
+		il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
+		val = _il_rd(il, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+#if 0				/* Enable this if you want to see details */
+			IL_ERR("uCode INST section is invalid at "
+			       "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
+			       *image);
+#endif
+			rc = -EIO;
+			errcnt++;
+			if (errcnt >= 3)
+				break;
+		}
+	}
+
+	return rc;
+}
+
+/**
+ * il3945_verify_ucode - determine which instruction image is in SRAM,
+ *    and verify its contents
+ */
+static int
+il3945_verify_ucode(struct il_priv *il)
+{
+	__le32 *image;
+	u32 len;
+	int rc = 0;
+
+	/* Try bootstrap */
+	image = (__le32 *) il->ucode_boot.v_addr;
+	len = il->ucode_boot.len;
+	rc = il3945_verify_inst_sparse(il, image, len);
+	if (rc == 0) {
+		D_INFO("Bootstrap uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	/* Try initialize */
+	image = (__le32 *) il->ucode_init.v_addr;
+	len = il->ucode_init.len;
+	rc = il3945_verify_inst_sparse(il, image, len);
+	if (rc == 0) {
+		D_INFO("Initialize uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	/* Try runtime/protocol */
+	image = (__le32 *) il->ucode_code.v_addr;
+	len = il->ucode_code.len;
+	rc = il3945_verify_inst_sparse(il, image, len);
+	if (rc == 0) {
+		D_INFO("Runtime uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
+
+	/* Since nothing seems to match, show first several data entries in
+	 * instruction SRAM, so maybe visual inspection will give a clue.
+	 * Selection of bootstrap image (vs. other images) is arbitrary. */
+	image = (__le32 *) il->ucode_boot.v_addr;
+	len = il->ucode_boot.len;
+	rc = il3945_verify_inst_full(il, image, len);
+
+	return rc;
+}
+
+static void
+il3945_nic_start(struct il_priv *il)
+{
+	/* Remove all resets to allow NIC to operate */
+	_il_wr(il, CSR_RESET, 0);
+}
+
+#define IL3945_UCODE_GET(item)						\
+static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
+{									\
+	return le32_to_cpu(ucode->v1.item);				\
+}
+
+static u32
+il3945_ucode_get_header_size(u32 api_ver)
+{
+	return 24;
+}
+
+static u8 *
+il3945_ucode_get_data(const struct il_ucode_header *ucode)
+{
+	return (u8 *) ucode->v1.data;
+}
+
+IL3945_UCODE_GET(inst_size);
+IL3945_UCODE_GET(data_size);
+IL3945_UCODE_GET(init_size);
+IL3945_UCODE_GET(init_data_size);
+IL3945_UCODE_GET(boot_size);
+
+/**
+ * il3945_read_ucode - Read uCode images from disk file.
+ *
+ * Copy into buffers for card to fetch via bus-mastering
+ */
+static int
+il3945_read_ucode(struct il_priv *il)
+{
+	const struct il_ucode_header *ucode;
+	int ret = -EINVAL, idx;
+	const struct firmware *ucode_raw;
+	/* firmware file name contains uCode/driver compatibility version */
+	const char *name_pre = il->cfg->fw_name_pre;
+	const unsigned int api_max = il->cfg->ucode_api_max;
+	const unsigned int api_min = il->cfg->ucode_api_min;
+	char buf[25];
+	u8 *src;
+	size_t len;
+	u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
+
+	/* Ask kernel firmware_class module to get the boot firmware off disk.
+	 * request_firmware() is synchronous, file is in memory on return. */
+	for (idx = api_max; idx >= api_min; idx--) {
+		sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
+		ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
+		if (ret < 0) {
+			IL_ERR("%s firmware file req failed: %d\n", buf, ret);
+			if (ret == -ENOENT)
+				continue;
+			else
+				goto error;
+		} else {
+			if (idx < api_max)
+				IL_ERR("Loaded firmware %s, "
+				       "which is deprecated. "
+				       " Please use API v%u instead.\n", buf,
+				       api_max);
+			D_INFO("Got firmware '%s' file "
+			       "(%zd bytes) from disk\n", buf, ucode_raw->size);
+			break;
+		}
+	}
+
+	if (ret < 0)
+		goto error;
+
+	/* Make sure that we got at least our header! */
+	if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
+		IL_ERR("File size way too small!\n");
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Data from ucode file:  header followed by uCode images */
+	ucode = (struct il_ucode_header *)ucode_raw->data;
+
+	il->ucode_ver = le32_to_cpu(ucode->ver);
+	api_ver = IL_UCODE_API(il->ucode_ver);
+	inst_size = il3945_ucode_get_inst_size(ucode);
+	data_size = il3945_ucode_get_data_size(ucode);
+	init_size = il3945_ucode_get_init_size(ucode);
+	init_data_size = il3945_ucode_get_init_data_size(ucode);
+	boot_size = il3945_ucode_get_boot_size(ucode);
+	src = il3945_ucode_get_data(ucode);
+
+	/* api_ver should match the api version forming part of the
+	 * firmware filename ... but we don't check for that and only rely
+	 * on the API version read from firmware header from here on forward */
+
+	if (api_ver < api_min || api_ver > api_max) {
+		IL_ERR("Driver unable to support your firmware API. "
+		       "Driver supports v%u, firmware is v%u.\n", api_max,
+		       api_ver);
+		il->ucode_ver = 0;
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (api_ver != api_max)
+		IL_ERR("Firmware has old API version. Expected %u, "
+		       "got %u. New firmware can be obtained "
+		       "from http://www.intellinuxwireless.org.\n", api_max,
+		       api_ver);
+
+	IL_INFO("loaded firmware version %u.%u.%u.%u\n",
+		IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
+		IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
+
+	snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
+		 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
+		 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
+		 IL_UCODE_SERIAL(il->ucode_ver));
+
+	D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
+	D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
+	D_INFO("f/w package hdr runtime data size = %u\n", data_size);
+	D_INFO("f/w package hdr init inst size = %u\n", init_size);
+	D_INFO("f/w package hdr init data size = %u\n", init_data_size);
+	D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
+
+	/* Verify size of file vs. image size info in file's header */
+	if (ucode_raw->size !=
+	    il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
+	    init_size + init_data_size + boot_size) {
+
+		D_INFO("uCode file size %zd does not match expected size\n",
+		       ucode_raw->size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Verify that uCode images will fit in card's SRAM */
+	if (inst_size > IL39_MAX_INST_SIZE) {
+		D_INFO("uCode instr len %d too large to fit in\n", inst_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	if (data_size > IL39_MAX_DATA_SIZE) {
+		D_INFO("uCode data len %d too large to fit in\n", data_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (init_size > IL39_MAX_INST_SIZE) {
+		D_INFO("uCode init instr len %d too large to fit in\n",
+		       init_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (init_data_size > IL39_MAX_DATA_SIZE) {
+		D_INFO("uCode init data len %d too large to fit in\n",
+		       init_data_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+	if (boot_size > IL39_MAX_BSM_SIZE) {
+		D_INFO("uCode boot instr len %d too large to fit in\n",
+		       boot_size);
+		ret = -EINVAL;
+		goto err_release;
+	}
+
+	/* Allocate ucode buffers for card's bus-master loading ... */
+
+	/* Runtime instructions and 2 copies of data:
+	 * 1) unmodified from disk
+	 * 2) backup cache for save/restore during power-downs */
+	il->ucode_code.len = inst_size;
+	il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
+
+	il->ucode_data.len = data_size;
+	il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
+
+	il->ucode_data_backup.len = data_size;
+	il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
+
+	if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
+	    !il->ucode_data_backup.v_addr)
+		goto err_pci_alloc;
+
+	/* Initialization instructions and data */
+	if (init_size && init_data_size) {
+		il->ucode_init.len = init_size;
+		il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
+
+		il->ucode_init_data.len = init_data_size;
+		il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
+
+		if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
+			goto err_pci_alloc;
+	}
+
+	/* Bootstrap (instructions only, no data) */
+	if (boot_size) {
+		il->ucode_boot.len = boot_size;
+		il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
+
+		if (!il->ucode_boot.v_addr)
+			goto err_pci_alloc;
+	}
+
+	/* Copy images into buffers for card's bus-master reads ... */
+
+	/* Runtime instructions (first block of data in file) */
+	len = inst_size;
+	D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
+	memcpy(il->ucode_code.v_addr, src, len);
+	src += len;
+
+	D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+	       il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
+
+	/* Runtime data (2nd block)
+	 * NOTE:  Copy into backup buffer will be done in il3945_up()  */
+	len = data_size;
+	D_INFO("Copying (but not loading) uCode data len %zd\n", len);
+	memcpy(il->ucode_data.v_addr, src, len);
+	memcpy(il->ucode_data_backup.v_addr, src, len);
+	src += len;
+
+	/* Initialization instructions (3rd block) */
+	if (init_size) {
+		len = init_size;
+		D_INFO("Copying (but not loading) init instr len %zd\n", len);
+		memcpy(il->ucode_init.v_addr, src, len);
+		src += len;
+	}
+
+	/* Initialization data (4th block) */
+	if (init_data_size) {
+		len = init_data_size;
+		D_INFO("Copying (but not loading) init data len %zd\n", len);
+		memcpy(il->ucode_init_data.v_addr, src, len);
+		src += len;
+	}
+
+	/* Bootstrap instructions (5th block) */
+	len = boot_size;
+	D_INFO("Copying (but not loading) boot instr len %zd\n", len);
+	memcpy(il->ucode_boot.v_addr, src, len);
+
+	/* We have our copies now, allow OS release its copies */
+	release_firmware(ucode_raw);
+	return 0;
+
+err_pci_alloc:
+	IL_ERR("failed to allocate pci memory\n");
+	ret = -ENOMEM;
+	il3945_dealloc_ucode_pci(il);
+
+err_release:
+	release_firmware(ucode_raw);
+
+error:
+	return ret;
+}
+
+/**
+ * il3945_set_ucode_ptrs - Set uCode address location
+ *
+ * Tell initialization uCode where to find runtime uCode.
+ *
+ * BSM registers initially contain pointers to initialization uCode.
+ * We need to replace them to load runtime uCode inst and data,
+ * and to save runtime data when powering down.
+ */
+static int
+il3945_set_ucode_ptrs(struct il_priv *il)
+{
+	dma_addr_t pinst;
+	dma_addr_t pdata;
+
+	/* bits 31:0 for 3945 */
+	pinst = il->ucode_code.p_addr;
+	pdata = il->ucode_data_backup.p_addr;
+
+	/* Tell bootstrap uCode where to find image to load */
+	il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+	il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+	il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
+
+	/* Inst byte count must be last to set up, bit 31 signals uCode
+	 *   that all new ptr/size info is in place */
+	il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
+		   il->ucode_code.len | BSM_DRAM_INST_LOAD);
+
+	D_INFO("Runtime uCode pointers are set.\n");
+
+	return 0;
+}
+
+/**
+ * il3945_init_alive_start - Called after N_ALIVE notification received
+ *
+ * Called after N_ALIVE notification received from "initialize" uCode.
+ *
+ * Tell "initialize" uCode to go ahead and load the runtime uCode.
+ */
+static void
+il3945_init_alive_start(struct il_priv *il)
+{
+	/* Check alive response for "valid" sign from uCode */
+	if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
+		/* We had an error bringing up the hardware, so take it
+		 * all the way back down so we can try again */
+		D_INFO("Initialize Alive failed.\n");
+		goto restart;
+	}
+
+	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
+	 * This is a paranoid check, because we would not have gotten the
+	 * "initialize" alive if code weren't properly loaded.  */
+	if (il3945_verify_ucode(il)) {
+		/* Runtime instruction load was bad;
+		 * take it all the way back down so we can try again */
+		D_INFO("Bad \"initialize\" uCode load.\n");
+		goto restart;
+	}
+
+	/* Send pointers to protocol/runtime uCode image ... init code will
+	 * load and launch runtime uCode, which will send us another "Alive"
+	 * notification. */
+	D_INFO("Initialization Alive received.\n");
+	if (il3945_set_ucode_ptrs(il)) {
+		/* Runtime instruction load won't happen;
+		 * take it all the way back down so we can try again */
+		D_INFO("Couldn't set up uCode pointers.\n");
+		goto restart;
+	}
+	return;
+
+restart:
+	queue_work(il->workqueue, &il->restart);
+}
+
+/**
+ * il3945_alive_start - called after N_ALIVE notification received
+ *                   from protocol/runtime uCode (initialization uCode's
+ *                   Alive gets handled by il3945_init_alive_start()).
+ */
+static void
+il3945_alive_start(struct il_priv *il)
+{
+	int thermal_spin = 0;
+	u32 rfkill;
+	struct il_rxon_context *ctx = &il->ctx;
+
+	D_INFO("Runtime Alive received.\n");
+
+	if (il->card_alive.is_valid != UCODE_VALID_OK) {
+		/* We had an error bringing up the hardware, so take it
+		 * all the way back down so we can try again */
+		D_INFO("Alive failed.\n");
+		goto restart;
+	}
+
+	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
+	 * This is a paranoid check, because we would not have gotten the
+	 * "runtime" alive if code weren't properly loaded.  */
+	if (il3945_verify_ucode(il)) {
+		/* Runtime instruction load was bad;
+		 * take it all the way back down so we can try again */
+		D_INFO("Bad runtime uCode load.\n");
+		goto restart;
+	}
+
+	rfkill = il_rd_prph(il, APMG_RFKILL_REG);
+	D_INFO("RFKILL status: 0x%x\n", rfkill);
+
+	if (rfkill & 0x1) {
+		clear_bit(S_RF_KILL_HW, &il->status);
+		/* if RFKILL is not on, then wait for thermal
+		 * sensor in adapter to kick in */
+		while (il3945_hw_get_temperature(il) == 0) {
+			thermal_spin++;
+			udelay(10);
+		}
+
+		if (thermal_spin)
+			D_INFO("Thermal calibration took %dus\n",
+			       thermal_spin * 10);
+	} else
+		set_bit(S_RF_KILL_HW, &il->status);
+
+	/* After the ALIVE response, we can send commands to 3945 uCode */
+	set_bit(S_ALIVE, &il->status);
+
+	/* Enable watchdog to monitor the driver tx queues */
+	il_setup_watchdog(il);
+
+	if (il_is_rfkill(il))
+		return;
+
+	ieee80211_wake_queues(il->hw);
+
+	il->active_rate = RATES_MASK_3945;
+
+	il_power_update_mode(il, true);
+
+	if (il_is_associated(il)) {
+		struct il3945_rxon_cmd *active_rxon =
+		    (struct il3945_rxon_cmd *)(&ctx->active);
+
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	} else {
+		/* Initialize our rx_config data */
+		il_connection_init_rx_config(il, ctx);
+	}
+
+	/* Configure Bluetooth device coexistence support */
+	il_send_bt_config(il);
+
+	set_bit(S_READY, &il->status);
+
+	/* Configure the adapter for unassociated operation */
+	il3945_commit_rxon(il, ctx);
+
+	il3945_reg_txpower_periodic(il);
+
+	D_INFO("ALIVE processing complete.\n");
+	wake_up(&il->wait_command_queue);
+
+	return;
+
+restart:
+	queue_work(il->workqueue, &il->restart);
+}
+
+static void il3945_cancel_deferred_work(struct il_priv *il);
+
+static void
+__il3945_down(struct il_priv *il)
+{
+	unsigned long flags;
+	int exit_pending;
+
+	D_INFO(DRV_NAME " is going down\n");
+
+	il_scan_cancel_timeout(il, 200);
+
+	exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
+
+	/* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
+	 * to prevent rearm timer */
+	del_timer_sync(&il->watchdog);
+
+	/* Station information will now be cleared in device */
+	il_clear_ucode_stations(il, NULL);
+	il_dealloc_bcast_stations(il);
+	il_clear_driver_stations(il);
+
+	/* Unblock any waiting calls */
+	wake_up_all(&il->wait_command_queue);
+
+	/* Wipe out the EXIT_PENDING status bit if we are not actually
+	 * exiting the module */
+	if (!exit_pending)
+		clear_bit(S_EXIT_PENDING, &il->status);
+
+	/* stop and reset the on-board processor */
+	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+	/* tell the device to stop sending interrupts */
+	spin_lock_irqsave(&il->lock, flags);
+	il_disable_interrupts(il);
+	spin_unlock_irqrestore(&il->lock, flags);
+	il3945_synchronize_irq(il);
+
+	if (il->mac80211_registered)
+		ieee80211_stop_queues(il->hw);
+
+	/* If we have not previously called il3945_init() then
+	 * clear all bits but the RF Kill bits and return */
+	if (!il_is_init(il)) {
+		il->status =
+		    test_bit(S_RF_KILL_HW,
+			     &il->
+			     status) << S_RF_KILL_HW |
+		    test_bit(S_GEO_CONFIGURED,
+			     &il->
+			     status) << S_GEO_CONFIGURED |
+		    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
+		goto exit;
+	}
+
+	/* ...otherwise clear out all the status bits but the RF Kill
+	 * bit and continue taking the NIC down. */
+	il->status &=
+	    test_bit(S_RF_KILL_HW,
+		     &il->status) << S_RF_KILL_HW | test_bit(S_GEO_CONFIGURED,
+							     &il->
+							     status) <<
+	    S_GEO_CONFIGURED | test_bit(S_FW_ERROR,
+					&il->
+					status) << S_FW_ERROR |
+	    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
+
+	il3945_hw_txq_ctx_stop(il);
+	il3945_hw_rxq_stop(il);
+
+	/* Power-down device's busmaster DMA clocks */
+	il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+	udelay(5);
+
+	/* Stop the device, and put it in low power state */
+	il_apm_stop(il);
+
+exit:
+	memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
+
+	if (il->beacon_skb)
+		dev_kfree_skb(il->beacon_skb);
+	il->beacon_skb = NULL;
+
+	/* clear out any free frames */
+	il3945_clear_free_frames(il);
+}
+
+static void
+il3945_down(struct il_priv *il)
+{
+	mutex_lock(&il->mutex);
+	__il3945_down(il);
+	mutex_unlock(&il->mutex);
+
+	il3945_cancel_deferred_work(il);
+}
+
+#define MAX_HW_RESTARTS 5
+
+static int
+il3945_alloc_bcast_station(struct il_priv *il)
+{
+	struct il_rxon_context *ctx = &il->ctx;
+	unsigned long flags;
+	u8 sta_id;
+
+	spin_lock_irqsave(&il->sta_lock, flags);
+	sta_id = il_prep_station(il, ctx, il_bcast_addr, false, NULL);
+	if (sta_id == IL_INVALID_STATION) {
+		IL_ERR("Unable to prepare broadcast station\n");
+		spin_unlock_irqrestore(&il->sta_lock, flags);
+
+		return -EINVAL;
+	}
+
+	il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
+	il->stations[sta_id].used |= IL_STA_BCAST;
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+
+	return 0;
+}
+
+static int
+__il3945_up(struct il_priv *il)
+{
+	int rc, i;
+
+	rc = il3945_alloc_bcast_station(il);
+	if (rc)
+		return rc;
+
+	if (test_bit(S_EXIT_PENDING, &il->status)) {
+		IL_WARN("Exit pending; will not bring the NIC up\n");
+		return -EIO;
+	}
+
+	if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
+		IL_ERR("ucode not available for device bring up\n");
+		return -EIO;
+	}
+
+	/* If platform's RF_KILL switch is NOT set to KILL */
+	if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+		clear_bit(S_RF_KILL_HW, &il->status);
+	else {
+		set_bit(S_RF_KILL_HW, &il->status);
+		IL_WARN("Radio disabled by HW RF Kill switch\n");
+		return -ENODEV;
+	}
+
+	_il_wr(il, CSR_INT, 0xFFFFFFFF);
+
+	rc = il3945_hw_nic_init(il);
+	if (rc) {
+		IL_ERR("Unable to int nic\n");
+		return rc;
+	}
+
+	/* make sure rfkill handshake bits are cleared */
+	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+	/* clear (again), then enable host interrupts */
+	_il_wr(il, CSR_INT, 0xFFFFFFFF);
+	il_enable_interrupts(il);
+
+	/* really make sure rfkill handshake bits are cleared */
+	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+	_il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+	/* Copy original ucode data image from disk into backup cache.
+	 * This will be used to initialize the on-board processor's
+	 * data SRAM for a clean start when the runtime program first loads. */
+	memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
+	       il->ucode_data.len);
+
+	/* We return success when we resume from suspend and rf_kill is on. */
+	if (test_bit(S_RF_KILL_HW, &il->status))
+		return 0;
+
+	for (i = 0; i < MAX_HW_RESTARTS; i++) {
+
+		/* load bootstrap state machine,
+		 * load bootstrap program into processor's memory,
+		 * prepare to load the "initialize" uCode */
+		rc = il->cfg->ops->lib->load_ucode(il);
+
+		if (rc) {
+			IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
+			continue;
+		}
+
+		/* start card; "initialize" will load runtime ucode */
+		il3945_nic_start(il);
+
+		D_INFO(DRV_NAME " is coming up\n");
+
+		return 0;
+	}
+
+	set_bit(S_EXIT_PENDING, &il->status);
+	__il3945_down(il);
+	clear_bit(S_EXIT_PENDING, &il->status);
+
+	/* tried to restart and config the device for as long as our
+	 * patience could withstand */
+	IL_ERR("Unable to initialize device after %d attempts.\n", i);
+	return -EIO;
+}
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void
+il3945_bg_init_alive_start(struct work_struct *data)
+{
+	struct il_priv *il =
+	    container_of(data, struct il_priv, init_alive_start.work);
+
+	mutex_lock(&il->mutex);
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		goto out;
+
+	il3945_init_alive_start(il);
+out:
+	mutex_unlock(&il->mutex);
+}
+
+static void
+il3945_bg_alive_start(struct work_struct *data)
+{
+	struct il_priv *il =
+	    container_of(data, struct il_priv, alive_start.work);
+
+	mutex_lock(&il->mutex);
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		goto out;
+
+	il3945_alive_start(il);
+out:
+	mutex_unlock(&il->mutex);
+}
+
+/*
+ * 3945 cannot interrupt driver when hardware rf kill switch toggles;
+ * driver must poll CSR_GP_CNTRL_REG register for change.  This register
+ * *is* readable even when device has been SW_RESET into low power mode
+ * (e.g. during RF KILL).
+ */
+static void
+il3945_rfkill_poll(struct work_struct *data)
+{
+	struct il_priv *il =
+	    container_of(data, struct il_priv, _3945.rfkill_poll.work);
+	bool old_rfkill = test_bit(S_RF_KILL_HW, &il->status);
+	bool new_rfkill =
+	    !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
+
+	if (new_rfkill != old_rfkill) {
+		if (new_rfkill)
+			set_bit(S_RF_KILL_HW, &il->status);
+		else
+			clear_bit(S_RF_KILL_HW, &il->status);
+
+		wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
+
+		D_RF_KILL("RF_KILL bit toggled to %s.\n",
+			  new_rfkill ? "disable radio" : "enable radio");
+	}
+
+	/* Keep this running, even if radio now enabled.  This will be
+	 * cancelled in mac_start() if system decides to start again */
+	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
+			   round_jiffies_relative(2 * HZ));
+
+}
+
+int
+il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
+{
+	struct il_host_cmd cmd = {
+		.id = C_SCAN,
+		.len = sizeof(struct il3945_scan_cmd),
+		.flags = CMD_SIZE_HUGE,
+	};
+	struct il3945_scan_cmd *scan;
+	u8 n_probes = 0;
+	enum ieee80211_band band;
+	bool is_active = false;
+	int ret;
+	u16 len;
+
+	lockdep_assert_held(&il->mutex);
+
+	if (!il->scan_cmd) {
+		il->scan_cmd =
+		    kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
+			    GFP_KERNEL);
+		if (!il->scan_cmd) {
+			D_SCAN("Fail to allocate scan memory\n");
+			return -ENOMEM;
+		}
+	}
+	scan = il->scan_cmd;
+	memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
+
+	scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
+	scan->quiet_time = IL_ACTIVE_QUIET_TIME;
+
+	if (il_is_associated(il)) {
+		u16 interval;
+		u32 extra;
+		u32 suspend_time = 100;
+		u32 scan_suspend_time = 100;
+
+		D_INFO("Scanning while associated...\n");
+
+		interval = vif->bss_conf.beacon_int;
+
+		scan->suspend_time = 0;
+		scan->max_out_time = cpu_to_le32(200 * 1024);
+		if (!interval)
+			interval = suspend_time;
+		/*
+		 * suspend time format:
+		 *  0-19: beacon interval in usec (time before exec.)
+		 * 20-23: 0
+		 * 24-31: number of beacons (suspend between channels)
+		 */
+
+		extra = (suspend_time / interval) << 24;
+		scan_suspend_time =
+		    0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
+
+		scan->suspend_time = cpu_to_le32(scan_suspend_time);
+		D_SCAN("suspend_time 0x%X beacon interval %d\n",
+		       scan_suspend_time, interval);
+	}
+
+	if (il->scan_request->n_ssids) {
+		int i, p = 0;
+		D_SCAN("Kicking off active scan\n");
+		for (i = 0; i < il->scan_request->n_ssids; i++) {
+			/* always does wildcard anyway */
+			if (!il->scan_request->ssids[i].ssid_len)
+				continue;
+			scan->direct_scan[p].id = WLAN_EID_SSID;
+			scan->direct_scan[p].len =
+			    il->scan_request->ssids[i].ssid_len;
+			memcpy(scan->direct_scan[p].ssid,
+			       il->scan_request->ssids[i].ssid,
+			       il->scan_request->ssids[i].ssid_len);
+			n_probes++;
+			p++;
+		}
+		is_active = true;
+	} else
+		D_SCAN("Kicking off passive scan.\n");
+
+	/* We don't build a direct scan probe request; the uCode will do
+	 * that based on the direct_mask added to each channel entry */
+	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+	scan->tx_cmd.sta_id = il->ctx.bcast_sta_id;
+	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	/* flags + rate selection */
+
+	switch (il->scan_band) {
+	case IEEE80211_BAND_2GHZ:
+		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+		scan->tx_cmd.rate = RATE_1M_PLCP;
+		band = IEEE80211_BAND_2GHZ;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		scan->tx_cmd.rate = RATE_6M_PLCP;
+		band = IEEE80211_BAND_5GHZ;
+		break;
+	default:
+		IL_WARN("Invalid scan band\n");
+		return -EIO;
+	}
+
+	/*
+	 * If active scaning is requested but a certain channel is marked
+	 * passive, we can do active scanning if we detect transmissions. For
+	 * passive only scanning disable switching to active on any channel.
+	 */
+	scan->good_CRC_th =
+	    is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
+
+	len =
+	    il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
+			      vif->addr, il->scan_request->ie,
+			      il->scan_request->ie_len,
+			      IL_MAX_SCAN_SIZE - sizeof(*scan));
+	scan->tx_cmd.len = cpu_to_le16(len);
+
+	/* select Rx antennas */
+	scan->flags |= il3945_get_antenna_flags(il);
+
+	scan->channel_count =
+	    il3945_get_channels_for_scan(il, band, is_active, n_probes,
+					 (void *)&scan->data[len], vif);
+	if (scan->channel_count == 0) {
+		D_SCAN("channel count %d\n", scan->channel_count);
+		return -EIO;
+	}
+
+	cmd.len +=
+	    le16_to_cpu(scan->tx_cmd.len) +
+	    scan->channel_count * sizeof(struct il3945_scan_channel);
+	cmd.data = scan;
+	scan->len = cpu_to_le16(cmd.len);
+
+	set_bit(S_SCAN_HW, &il->status);
+	ret = il_send_cmd_sync(il, &cmd);
+	if (ret)
+		clear_bit(S_SCAN_HW, &il->status);
+	return ret;
+}
+
+void
+il3945_post_scan(struct il_priv *il)
+{
+	struct il_rxon_context *ctx = &il->ctx;
+
+	/*
+	 * Since setting the RXON may have been deferred while
+	 * performing the scan, fire one off if needed
+	 */
+	if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+		il3945_commit_rxon(il, ctx);
+}
+
+static void
+il3945_bg_restart(struct work_struct *data)
+{
+	struct il_priv *il = container_of(data, struct il_priv, restart);
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return;
+
+	if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
+		mutex_lock(&il->mutex);
+		il->ctx.vif = NULL;
+		il->is_open = 0;
+		mutex_unlock(&il->mutex);
+		il3945_down(il);
+		ieee80211_restart_hw(il->hw);
+	} else {
+		il3945_down(il);
+
+		mutex_lock(&il->mutex);
+		if (test_bit(S_EXIT_PENDING, &il->status)) {
+			mutex_unlock(&il->mutex);
+			return;
+		}
+
+		__il3945_up(il);
+		mutex_unlock(&il->mutex);
+	}
+}
+
+static void
+il3945_bg_rx_replenish(struct work_struct *data)
+{
+	struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
+
+	mutex_lock(&il->mutex);
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		goto out;
+
+	il3945_rx_replenish(il);
+out:
+	mutex_unlock(&il->mutex);
+}
+
+void
+il3945_post_associate(struct il_priv *il)
+{
+	int rc = 0;
+	struct ieee80211_conf *conf = NULL;
+	struct il_rxon_context *ctx = &il->ctx;
+
+	if (!ctx->vif || !il->is_open)
+		return;
+
+	D_ASSOC("Associated as %d to: %pM\n", ctx->vif->bss_conf.aid,
+		ctx->active.bssid_addr);
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return;
+
+	il_scan_cancel_timeout(il, 200);
+
+	conf = &il->hw->conf;
+
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	il3945_commit_rxon(il, ctx);
+
+	rc = il_send_rxon_timing(il, ctx);
+	if (rc)
+		IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
+
+	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+
+	ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
+
+	D_ASSOC("assoc id %d beacon interval %d\n", ctx->vif->bss_conf.aid,
+		ctx->vif->bss_conf.beacon_int);
+
+	if (ctx->vif->bss_conf.use_short_preamble)
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+		if (ctx->vif->bss_conf.use_short_slot)
+			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+	}
+
+	il3945_commit_rxon(il, ctx);
+
+	switch (ctx->vif->type) {
+	case NL80211_IFTYPE_STATION:
+		il3945_rate_scale_init(il->hw, IL_AP_ID);
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		il3945_send_beacon_cmd(il);
+		break;
+	default:
+		IL_ERR("%s Should not be called in %d mode\n", __func__,
+		       ctx->vif->type);
+		break;
+	}
+}
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+#define UCODE_READY_TIMEOUT	(2 * HZ)
+
+static int
+il3945_mac_start(struct ieee80211_hw *hw)
+{
+	struct il_priv *il = hw->priv;
+	int ret;
+
+	D_MAC80211("enter\n");
+
+	/* we should be verifying the device is ready to be opened */
+	mutex_lock(&il->mutex);
+
+	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
+	 * ucode filename and max sizes are card-specific. */
+
+	if (!il->ucode_code.len) {
+		ret = il3945_read_ucode(il);
+		if (ret) {
+			IL_ERR("Could not read microcode: %d\n", ret);
+			mutex_unlock(&il->mutex);
+			goto out_release_irq;
+		}
+	}
+
+	ret = __il3945_up(il);
+
+	mutex_unlock(&il->mutex);
+
+	if (ret)
+		goto out_release_irq;
+
+	D_INFO("Start UP work.\n");
+
+	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
+	 * mac80211 will not be run successfully. */
+	ret = wait_event_timeout(il->wait_command_queue,
+				 test_bit(S_READY, &il->status),
+				 UCODE_READY_TIMEOUT);
+	if (!ret) {
+		if (!test_bit(S_READY, &il->status)) {
+			IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
+			       jiffies_to_msecs(UCODE_READY_TIMEOUT));
+			ret = -ETIMEDOUT;
+			goto out_release_irq;
+		}
+	}
+
+	/* ucode is running and will send rfkill notifications,
+	 * no need to poll the killswitch state anymore */
+	cancel_delayed_work(&il->_3945.rfkill_poll);
+
+	il->is_open = 1;
+	D_MAC80211("leave\n");
+	return 0;
+
+out_release_irq:
+	il->is_open = 0;
+	D_MAC80211("leave - failed\n");
+	return ret;
+}
+
+static void
+il3945_mac_stop(struct ieee80211_hw *hw)
+{
+	struct il_priv *il = hw->priv;
+
+	D_MAC80211("enter\n");
+
+	if (!il->is_open) {
+		D_MAC80211("leave - skip\n");
+		return;
+	}
+
+	il->is_open = 0;
+
+	il3945_down(il);
+
+	flush_workqueue(il->workqueue);
+
+	/* start polling the killswitch state again */
+	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
+			   round_jiffies_relative(2 * HZ));
+
+	D_MAC80211("leave\n");
+}
+
+static void
+il3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct il_priv *il = hw->priv;
+
+	D_MAC80211("enter\n");
+
+	D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+	     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+	if (il3945_tx_skb(il, skb))
+		dev_kfree_skb_any(skb);
+
+	D_MAC80211("leave\n");
+}
+
+void
+il3945_config_ap(struct il_priv *il)
+{
+	struct il_rxon_context *ctx = &il->ctx;
+	struct ieee80211_vif *vif = ctx->vif;
+	int rc = 0;
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return;
+
+	/* The following should be done only at AP bring up */
+	if (!(il_is_associated(il))) {
+
+		/* RXON - unassoc (to set timing command) */
+		ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		il3945_commit_rxon(il, ctx);
+
+		/* RXON Timing */
+		rc = il_send_rxon_timing(il, ctx);
+		if (rc)
+			IL_WARN("C_RXON_TIMING failed - "
+				"Attempting to continue.\n");
+
+		ctx->staging.assoc_id = 0;
+
+		if (vif->bss_conf.use_short_preamble)
+			ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+		if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+			if (vif->bss_conf.use_short_slot)
+				ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+			else
+				ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+		}
+		/* restore RXON assoc */
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		il3945_commit_rxon(il, ctx);
+	}
+	il3945_send_beacon_cmd(il);
+}
+
+static int
+il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+		   struct ieee80211_key_conf *key)
+{
+	struct il_priv *il = hw->priv;
+	int ret = 0;
+	u8 sta_id = IL_INVALID_STATION;
+	u8 static_key;
+
+	D_MAC80211("enter\n");
+
+	if (il3945_mod_params.sw_crypto) {
+		D_MAC80211("leave - hwcrypto disabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * To support IBSS RSN, don't program group keys in IBSS, the
+	 * hardware will then not attempt to decrypt the frames.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC &&
+	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		return -EOPNOTSUPP;
+
+	static_key = !il_is_associated(il);
+
+	if (!static_key) {
+		sta_id = il_sta_id_or_broadcast(il, &il->ctx, sta);
+		if (sta_id == IL_INVALID_STATION)
+			return -EINVAL;
+	}
+
+	mutex_lock(&il->mutex);
+	il_scan_cancel_timeout(il, 100);
+
+	switch (cmd) {
+	case SET_KEY:
+		if (static_key)
+			ret = il3945_set_static_key(il, key);
+		else
+			ret = il3945_set_dynamic_key(il, key, sta_id);
+		D_MAC80211("enable hwcrypto key\n");
+		break;
+	case DISABLE_KEY:
+		if (static_key)
+			ret = il3945_remove_static_key(il);
+		else
+			ret = il3945_clear_sta_key_info(il, sta_id);
+		D_MAC80211("disable hwcrypto key\n");
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&il->mutex);
+	D_MAC80211("leave\n");
+
+	return ret;
+}
+
+static int
+il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		   struct ieee80211_sta *sta)
+{
+	struct il_priv *il = hw->priv;
+	struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
+	int ret;
+	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
+	u8 sta_id;
+
+	D_INFO("received request to add station %pM\n", sta->addr);
+	mutex_lock(&il->mutex);
+	D_INFO("proceeding to add station %pM\n", sta->addr);
+	sta_priv->common.sta_id = IL_INVALID_STATION;
+
+	ret =
+	    il_add_station_common(il, &il->ctx, sta->addr, is_ap, sta, &sta_id);
+	if (ret) {
+		IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
+		/* Should we return success if return code is EEXIST ? */
+		mutex_unlock(&il->mutex);
+		return ret;
+	}
+
+	sta_priv->common.sta_id = sta_id;
+
+	/* Initialize rate scaling */
+	D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
+	il3945_rs_rate_init(il, sta, sta_id);
+	mutex_unlock(&il->mutex);
+
+	return 0;
+}
+
+static void
+il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
+			unsigned int *total_flags, u64 multicast)
+{
+	struct il_priv *il = hw->priv;
+	__le32 filter_or = 0, filter_nand = 0;
+	struct il_rxon_context *ctx = &il->ctx;
+
+#define CHK(test, flag)	do { \
+	if (*total_flags & (test))		\
+		filter_or |= (flag);		\
+	else					\
+		filter_nand |= (flag);		\
+	} while (0)
+
+	D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
+		   *total_flags);
+
+	CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
+	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
+	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
+
+#undef CHK
+
+	mutex_lock(&il->mutex);
+
+	ctx->staging.filter_flags &= ~filter_nand;
+	ctx->staging.filter_flags |= filter_or;
+
+	/*
+	 * Not committing directly because hardware can perform a scan,
+	 * but even if hw is ready, committing here breaks for some reason,
+	 * we'll eventually commit the filter flags change anyway.
+	 */
+
+	mutex_unlock(&il->mutex);
+
+	/*
+	 * Receiving all multicast frames is always enabled by the
+	 * default flags setup in il_connection_init_rx_config()
+	 * since we currently do not support programming multicast
+	 * filters into the device.
+	 */
+	*total_flags &=
+	    FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+	    FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t
+il3945_show_debug_level(struct device *d, struct device_attribute *attr,
+			char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
+}
+
+static ssize_t
+il3945_store_debug_level(struct device *d, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 0, &val);
+	if (ret)
+		IL_INFO("%s is not in hex or decimal form.\n", buf);
+	else {
+		il->debug_level = val;
+		if (il_alloc_traffic_mem(il))
+			IL_ERR("Not enough memory to generate traffic log\n");
+	}
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il3945_show_debug_level,
+		   il3945_store_debug_level);
+
+#endif /* CONFIG_IWLEGACY_DEBUG */
+
+static ssize_t
+il3945_show_temperature(struct device *d, struct device_attribute *attr,
+			char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+
+	if (!il_is_alive(il))
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);
+
+static ssize_t
+il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	return sprintf(buf, "%d\n", il->tx_power_user_lmt);
+}
+
+static ssize_t
+il3945_store_tx_power(struct device *d, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	char *p = (char *)buf;
+	u32 val;
+
+	val = simple_strtoul(p, &p, 10);
+	if (p == buf)
+		IL_INFO(": %s is not in decimal form.\n", buf);
+	else
+		il3945_hw_reg_set_txpower(il, val);
+
+	return count;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power,
+		   il3945_store_tx_power);
+
+static ssize_t
+il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	struct il_rxon_context *ctx = &il->ctx;
+
+	return sprintf(buf, "0x%04X\n", ctx->active.flags);
+}
+
+static ssize_t
+il3945_store_flags(struct device *d, struct device_attribute *attr,
+		   const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	u32 flags = simple_strtoul(buf, NULL, 0);
+	struct il_rxon_context *ctx = &il->ctx;
+
+	mutex_lock(&il->mutex);
+	if (le32_to_cpu(ctx->staging.flags) != flags) {
+		/* Cancel any currently running scans... */
+		if (il_scan_cancel_timeout(il, 100))
+			IL_WARN("Could not cancel scan.\n");
+		else {
+			D_INFO("Committing rxon.flags = 0x%04X\n", flags);
+			ctx->staging.flags = cpu_to_le32(flags);
+			il3945_commit_rxon(il, ctx);
+		}
+	}
+	mutex_unlock(&il->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags,
+		   il3945_store_flags);
+
+static ssize_t
+il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
+			 char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	struct il_rxon_context *ctx = &il->ctx;
+
+	return sprintf(buf, "0x%04X\n", le32_to_cpu(ctx->active.filter_flags));
+}
+
+static ssize_t
+il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	struct il_rxon_context *ctx = &il->ctx;
+	u32 filter_flags = simple_strtoul(buf, NULL, 0);
+
+	mutex_lock(&il->mutex);
+	if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
+		/* Cancel any currently running scans... */
+		if (il_scan_cancel_timeout(il, 100))
+			IL_WARN("Could not cancel scan.\n");
+		else {
+			D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
+			       filter_flags);
+			ctx->staging.filter_flags = cpu_to_le32(filter_flags);
+			il3945_commit_rxon(il, ctx);
+		}
+	}
+	mutex_unlock(&il->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
+		   il3945_store_filter_flags);
+
+static ssize_t
+il3945_show_measurement(struct device *d, struct device_attribute *attr,
+			char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	struct il_spectrum_notification measure_report;
+	u32 size = sizeof(measure_report), len = 0, ofs = 0;
+	u8 *data = (u8 *) &measure_report;
+	unsigned long flags;
+
+	spin_lock_irqsave(&il->lock, flags);
+	if (!(il->measurement_status & MEASUREMENT_READY)) {
+		spin_unlock_irqrestore(&il->lock, flags);
+		return 0;
+	}
+	memcpy(&measure_report, &il->measure_report, size);
+	il->measurement_status = 0;
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	while (size && PAGE_SIZE - len) {
+		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
+				   PAGE_SIZE - len, 1);
+		len = strlen(buf);
+		if (PAGE_SIZE - len)
+			buf[len++] = '\n';
+
+		ofs += 16;
+		size -= min(size, 16U);
+	}
+
+	return len;
+}
+
+static ssize_t
+il3945_store_measurement(struct device *d, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	struct il_rxon_context *ctx = &il->ctx;
+	struct ieee80211_measurement_params params = {
+		.channel = le16_to_cpu(ctx->active.channel),
+		.start_time = cpu_to_le64(il->_3945.last_tsf),
+		.duration = cpu_to_le16(1),
+	};
+	u8 type = IL_MEASURE_BASIC;
+	u8 buffer[32];
+	u8 channel;
+
+	if (count) {
+		char *p = buffer;
+		strncpy(buffer, buf, min(sizeof(buffer), count));
+		channel = simple_strtoul(p, NULL, 0);
+		if (channel)
+			params.channel = channel;
+
+		p = buffer;
+		while (*p && *p != ' ')
+			p++;
+		if (*p)
+			type = simple_strtoul(p + 1, NULL, 0);
+	}
+
+	D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
+	       type, params.channel, buf);
+	il3945_get_measurement(il, &params, type);
+
+	return count;
+}
+
+static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, il3945_show_measurement,
+		   il3945_store_measurement);
+
+static ssize_t
+il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+
+	il->retry_rate = simple_strtoul(buf, NULL, 0);
+	if (il->retry_rate <= 0)
+		il->retry_rate = 1;
+
+	return count;
+}
+
+static ssize_t
+il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
+		       char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	return sprintf(buf, "%d", il->retry_rate);
+}
+
+static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
+		   il3945_store_retry_rate);
+
+static ssize_t
+il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
+{
+	/* all this shit doesn't belong into sysfs anyway */
+	return 0;
+}
+
+static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);
+
+static ssize_t
+il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+
+	if (!il_is_alive(il))
+		return -EAGAIN;
+
+	return sprintf(buf, "%d\n", il3945_mod_params.antenna);
+}
+
+static ssize_t
+il3945_store_antenna(struct device *d, struct device_attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct il_priv *il __maybe_unused = dev_get_drvdata(d);
+	int ant;
+
+	if (count == 0)
+		return 0;
+
+	if (sscanf(buf, "%1i", &ant) != 1) {
+		D_INFO("not in hex or decimal form.\n");
+		return count;
+	}
+
+	if (ant >= 0 && ant <= 2) {
+		D_INFO("Setting antenna select to %d.\n", ant);
+		il3945_mod_params.antenna = (enum il3945_antenna)ant;
+	} else
+		D_INFO("Bad antenna select value %d.\n", ant);
+
+	return count;
+}
+
+static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna,
+		   il3945_store_antenna);
+
+static ssize_t
+il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	if (!il_is_alive(il))
+		return -EAGAIN;
+	return sprintf(buf, "0x%08x\n", (int)il->status);
+}
+
+static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);
+
+static ssize_t
+il3945_dump_error_log(struct device *d, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct il_priv *il = dev_get_drvdata(d);
+	char *p = (char *)buf;
+
+	if (p[0] == '1')
+		il3945_dump_nic_error_log(il);
+
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);
+
+/*****************************************************************************
+ *
+ * driver setup and tear down
+ *
+ *****************************************************************************/
+
+static void
+il3945_setup_deferred_work(struct il_priv *il)
+{
+	il->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+	init_waitqueue_head(&il->wait_command_queue);
+
+	INIT_WORK(&il->restart, il3945_bg_restart);
+	INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
+	INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
+	INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
+	INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
+
+	il_setup_scan_deferred_work(il);
+
+	il3945_hw_setup_deferred_work(il);
+
+	init_timer(&il->watchdog);
+	il->watchdog.data = (unsigned long)il;
+	il->watchdog.function = il_bg_watchdog;
+
+	tasklet_init(&il->irq_tasklet,
+		     (void (*)(unsigned long))il3945_irq_tasklet,
+		     (unsigned long)il);
+}
+
+static void
+il3945_cancel_deferred_work(struct il_priv *il)
+{
+	il3945_hw_cancel_deferred_work(il);
+
+	cancel_delayed_work_sync(&il->init_alive_start);
+	cancel_delayed_work(&il->alive_start);
+
+	il_cancel_scan_deferred_work(il);
+}
+
+static struct attribute *il3945_sysfs_entries[] = {
+	&dev_attr_antenna.attr,
+	&dev_attr_channels.attr,
+	&dev_attr_dump_errors.attr,
+	&dev_attr_flags.attr,
+	&dev_attr_filter_flags.attr,
+	&dev_attr_measurement.attr,
+	&dev_attr_retry_rate.attr,
+	&dev_attr_status.attr,
+	&dev_attr_temperature.attr,
+	&dev_attr_tx_power.attr,
+#ifdef CONFIG_IWLEGACY_DEBUG
+	&dev_attr_debug_level.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group il3945_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = il3945_sysfs_entries,
+};
+
+struct ieee80211_ops il3945_hw_ops = {
+	.tx = il3945_mac_tx,
+	.start = il3945_mac_start,
+	.stop = il3945_mac_stop,
+	.add_interface = il_mac_add_interface,
+	.remove_interface = il_mac_remove_interface,
+	.change_interface = il_mac_change_interface,
+	.config = il_mac_config,
+	.configure_filter = il3945_configure_filter,
+	.set_key = il3945_mac_set_key,
+	.conf_tx = il_mac_conf_tx,
+	.reset_tsf = il_mac_reset_tsf,
+	.bss_info_changed = il_mac_bss_info_changed,
+	.hw_scan = il_mac_hw_scan,
+	.sta_add = il3945_mac_sta_add,
+	.sta_remove = il_mac_sta_remove,
+	.tx_last_beacon = il_mac_tx_last_beacon,
+};
+
+static int
+il3945_init_drv(struct il_priv *il)
+{
+	int ret;
+	struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+
+	il->retry_rate = 1;
+	il->beacon_skb = NULL;
+
+	spin_lock_init(&il->sta_lock);
+	spin_lock_init(&il->hcmd_lock);
+
+	INIT_LIST_HEAD(&il->free_frames);
+
+	mutex_init(&il->mutex);
+
+	il->ieee_channels = NULL;
+	il->ieee_rates = NULL;
+	il->band = IEEE80211_BAND_2GHZ;
+
+	il->iw_mode = NL80211_IFTYPE_STATION;
+	il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
+
+	/* initialize force reset */
+	il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
+
+	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
+		IL_WARN("Unsupported EEPROM version: 0x%04X\n",
+			eeprom->version);
+		ret = -EINVAL;
+		goto err;
+	}
+	ret = il_init_channel_map(il);
+	if (ret) {
+		IL_ERR("initializing regulatory failed: %d\n", ret);
+		goto err;
+	}
+
+	/* Set up txpower settings in driver for all channels */
+	if (il3945_txpower_set_from_eeprom(il)) {
+		ret = -EIO;
+		goto err_free_channel_map;
+	}
+
+	ret = il_init_geos(il);
+	if (ret) {
+		IL_ERR("initializing geos failed: %d\n", ret);
+		goto err_free_channel_map;
+	}
+	il3945_init_hw_rates(il, il->ieee_rates);
+
+	return 0;
+
+err_free_channel_map:
+	il_free_channel_map(il);
+err:
+	return ret;
+}
+
+#define IL3945_MAX_PROBE_REQUEST	200
+
+static int
+il3945_setup_mac(struct il_priv *il)
+{
+	int ret;
+	struct ieee80211_hw *hw = il->hw;
+
+	hw->rate_control_algorithm = "iwl-3945-rs";
+	hw->sta_data_size = sizeof(struct il3945_sta_priv);
+	hw->vif_data_size = sizeof(struct il_vif_priv);
+
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT;
+
+	hw->wiphy->interface_modes = il->ctx.interface_modes;
+
+	hw->wiphy->flags |=
+	    WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS |
+	    WIPHY_FLAG_IBSS_RSN;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
+
+	/* Default value; 4 EDCA QOS priorities */
+	hw->queues = 4;
+
+	if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
+		il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+		    &il->bands[IEEE80211_BAND_2GHZ];
+
+	if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
+		il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+		    &il->bands[IEEE80211_BAND_5GHZ];
+
+	il_leds_init(il);
+
+	ret = ieee80211_register_hw(il->hw);
+	if (ret) {
+		IL_ERR("Failed to register hw (error %d)\n", ret);
+		return ret;
+	}
+	il->mac80211_registered = 1;
+
+	return 0;
+}
+
+static int
+il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int err = 0;
+	struct il_priv *il;
+	struct ieee80211_hw *hw;
+	struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
+	struct il3945_eeprom *eeprom;
+	unsigned long flags;
+
+	/***********************
+	 * 1. Allocating HW data
+	 * ********************/
+
+	/* mac80211 allocates memory for this device instance, including
+	 *   space for this driver's ilate structure */
+	hw = il_alloc_all(cfg);
+	if (hw == NULL) {
+		pr_err("Can not allocate network device\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	il = hw->priv;
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+
+	il->cmd_queue = IL39_CMD_QUEUE_NUM;
+
+	il->ctx.ctxid = 0;
+
+	il->ctx.rxon_cmd = C_RXON;
+	il->ctx.rxon_timing_cmd = C_RXON_TIMING;
+	il->ctx.rxon_assoc_cmd = C_RXON_ASSOC;
+	il->ctx.qos_cmd = C_QOS_PARAM;
+	il->ctx.ap_sta_id = IL_AP_ID;
+	il->ctx.wep_key_cmd = C_WEPKEY;
+	il->ctx.interface_modes =
+	    BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
+	il->ctx.ibss_devtype = RXON_DEV_TYPE_IBSS;
+	il->ctx.station_devtype = RXON_DEV_TYPE_ESS;
+	il->ctx.unused_devtype = RXON_DEV_TYPE_ESS;
+
+	/*
+	 * Disabling hardware scan means that mac80211 will perform scans
+	 * "the hard way", rather than using device's scan.
+	 */
+	if (il3945_mod_params.disable_hw_scan) {
+		D_INFO("Disabling hw_scan\n");
+		il3945_hw_ops.hw_scan = NULL;
+	}
+
+	D_INFO("*** LOAD DRIVER ***\n");
+	il->cfg = cfg;
+	il->pci_dev = pdev;
+	il->inta_mask = CSR_INI_SET_MASK;
+
+	if (il_alloc_traffic_mem(il))
+		IL_ERR("Not enough memory to generate traffic log\n");
+
+	/***************************
+	 * 2. Initializing PCI bus
+	 * *************************/
+	pci_disable_link_state(pdev,
+			       PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+			       PCIE_LINK_STATE_CLKPM);
+
+	if (pci_enable_device(pdev)) {
+		err = -ENODEV;
+		goto out_ieee80211_free_hw;
+	}
+
+	pci_set_master(pdev);
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (!err)
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err) {
+		IL_WARN("No suitable DMA available.\n");
+		goto out_pci_disable_device;
+	}
+
+	pci_set_drvdata(pdev, il);
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err)
+		goto out_pci_disable_device;
+
+	/***********************
+	 * 3. Read REV Register
+	 * ********************/
+	il->hw_base = pci_iomap(pdev, 0, 0);
+	if (!il->hw_base) {
+		err = -ENODEV;
+		goto out_pci_release_regions;
+	}
+
+	D_INFO("pci_resource_len = 0x%08llx\n",
+	       (unsigned long long)pci_resource_len(pdev, 0));
+	D_INFO("pci_resource_base = %p\n", il->hw_base);
+
+	/* We disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_write_config_byte(pdev, 0x41, 0x00);
+
+	/* these spin locks will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&il->reg_lock);
+	spin_lock_init(&il->lock);
+
+	/*
+	 * stop and reset the on-board processor just in case it is in a
+	 * strange state ... like being left stranded by a primary kernel
+	 * and this is now the kdump kernel trying to start up
+	 */
+	_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+	/***********************
+	 * 4. Read EEPROM
+	 * ********************/
+
+	/* Read the EEPROM */
+	err = il_eeprom_init(il);
+	if (err) {
+		IL_ERR("Unable to init EEPROM\n");
+		goto out_iounmap;
+	}
+	/* MAC Address location in EEPROM same for 3945/4965 */
+	eeprom = (struct il3945_eeprom *)il->eeprom;
+	D_INFO("MAC address: %pM\n", eeprom->mac_address);
+	SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
+
+	/***********************
+	 * 5. Setup HW Constants
+	 * ********************/
+	/* Device-specific setup */
+	if (il3945_hw_set_hw_params(il)) {
+		IL_ERR("failed to set hw settings\n");
+		goto out_eeprom_free;
+	}
+
+	/***********************
+	 * 6. Setup il
+	 * ********************/
+
+	err = il3945_init_drv(il);
+	if (err) {
+		IL_ERR("initializing driver failed\n");
+		goto out_unset_hw_params;
+	}
+
+	IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
+
+	/***********************
+	 * 7. Setup Services
+	 * ********************/
+
+	spin_lock_irqsave(&il->lock, flags);
+	il_disable_interrupts(il);
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	pci_enable_msi(il->pci_dev);
+
+	err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
+	if (err) {
+		IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
+		goto out_disable_msi;
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
+	if (err) {
+		IL_ERR("failed to create sysfs device attributes\n");
+		goto out_release_irq;
+	}
+
+	il_set_rxon_channel(il, &il->bands[IEEE80211_BAND_2GHZ].channels[5],
+			    &il->ctx);
+	il3945_setup_deferred_work(il);
+	il3945_setup_handlers(il);
+	il_power_initialize(il);
+
+	/*********************************
+	 * 8. Setup and Register mac80211
+	 * *******************************/
+
+	il_enable_interrupts(il);
+
+	err = il3945_setup_mac(il);
+	if (err)
+		goto out_remove_sysfs;
+
+	err = il_dbgfs_register(il, DRV_NAME);
+	if (err)
+		IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
+		       err);
+
+	/* Start monitoring the killswitch */
+	queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
+
+	return 0;
+
+out_remove_sysfs:
+	destroy_workqueue(il->workqueue);
+	il->workqueue = NULL;
+	sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
+out_release_irq:
+	free_irq(il->pci_dev->irq, il);
+out_disable_msi:
+	pci_disable_msi(il->pci_dev);
+	il_free_geos(il);
+	il_free_channel_map(il);
+out_unset_hw_params:
+	il3945_unset_hw_params(il);
+out_eeprom_free:
+	il_eeprom_free(il);
+out_iounmap:
+	pci_iounmap(pdev, il->hw_base);
+out_pci_release_regions:
+	pci_release_regions(pdev);
+out_pci_disable_device:
+	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
+out_ieee80211_free_hw:
+	il_free_traffic_mem(il);
+	ieee80211_free_hw(il->hw);
+out:
+	return err;
+}
+
+static void __devexit
+il3945_pci_remove(struct pci_dev *pdev)
+{
+	struct il_priv *il = pci_get_drvdata(pdev);
+	unsigned long flags;
+
+	if (!il)
+		return;
+
+	D_INFO("*** UNLOAD DRIVER ***\n");
+
+	il_dbgfs_unregister(il);
+
+	set_bit(S_EXIT_PENDING, &il->status);
+
+	il_leds_exit(il);
+
+	if (il->mac80211_registered) {
+		ieee80211_unregister_hw(il->hw);
+		il->mac80211_registered = 0;
+	} else {
+		il3945_down(il);
+	}
+
+	/*
+	 * Make sure device is reset to low power before unloading driver.
+	 * This may be redundant with il_down(), but there are paths to
+	 * run il_down() without calling apm_ops.stop(), and there are
+	 * paths to avoid running il_down() at all before leaving driver.
+	 * This (inexpensive) call *makes sure* device is reset.
+	 */
+	il_apm_stop(il);
+
+	/* make sure we flush any pending irq or
+	 * tasklet for the driver
+	 */
+	spin_lock_irqsave(&il->lock, flags);
+	il_disable_interrupts(il);
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	il3945_synchronize_irq(il);
+
+	sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
+
+	cancel_delayed_work_sync(&il->_3945.rfkill_poll);
+
+	il3945_dealloc_ucode_pci(il);
+
+	if (il->rxq.bd)
+		il3945_rx_queue_free(il, &il->rxq);
+	il3945_hw_txq_ctx_free(il);
+
+	il3945_unset_hw_params(il);
+
+	/*netif_stop_queue(dev); */
+	flush_workqueue(il->workqueue);
+
+	/* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
+	 * il->workqueue... so we can't take down the workqueue
+	 * until now... */
+	destroy_workqueue(il->workqueue);
+	il->workqueue = NULL;
+	il_free_traffic_mem(il);
+
+	free_irq(pdev->irq, il);
+	pci_disable_msi(pdev);
+
+	pci_iounmap(pdev, il->hw_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	il_free_channel_map(il);
+	il_free_geos(il);
+	kfree(il->scan_cmd);
+	if (il->beacon_skb)
+		dev_kfree_skb(il->beacon_skb);
+
+	ieee80211_free_hw(il->hw);
+}
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+
+static struct pci_driver il3945_driver = {
+	.name = DRV_NAME,
+	.id_table = il3945_hw_card_ids,
+	.probe = il3945_pci_probe,
+	.remove = __devexit_p(il3945_pci_remove),
+	.driver.pm = IL_LEGACY_PM_OPS,
+};
+
+static int __init
+il3945_init(void)
+{
+
+	int ret;
+	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+	pr_info(DRV_COPYRIGHT "\n");
+
+	ret = il3945_rate_control_register();
+	if (ret) {
+		pr_err("Unable to register rate control algorithm: %d\n", ret);
+		return ret;
+	}
+
+	ret = pci_register_driver(&il3945_driver);
+	if (ret) {
+		pr_err("Unable to initialize PCI module\n");
+		goto error_register;
+	}
+
+	return ret;
+
+error_register:
+	il3945_rate_control_unregister();
+	return ret;
+}
+
+static void __exit
+il3945_exit(void)
+{
+	pci_unregister_driver(&il3945_driver);
+	il3945_rate_control_unregister();
+}
+
+MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
+
+module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
+MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
+module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
+module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
+		   S_IRUGO);
+MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
+#ifdef CONFIG_IWLEGACY_DEBUG
+module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
+
+module_exit(il3945_exit);
+module_init(il3945_init);