Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Significantly shrink the core networking routing structures. Result
    of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf

 2) Add netdevsim driver for testing various offloads, from Jakub
    Kicinski.

 3) Support cross-chip FDB operations in DSA, from Vivien Didelot.

 4) Add a 2nd listener hash table for TCP, similar to what was done for
    UDP. From Martin KaFai Lau.

 5) Add eBPF based queue selection to tun, from Jason Wang.

 6) Lockless qdisc support, from John Fastabend.

 7) SCTP stream interleave support, from Xin Long.

 8) Smoother TCP receive autotuning, from Eric Dumazet.

 9) Lots of erspan tunneling enhancements, from William Tu.

10) Add true function call support to BPF, from Alexei Starovoitov.

11) Add explicit support for GRO HW offloading, from Michael Chan.

12) Support extack generation in more netlink subsystems. From Alexander
    Aring, Quentin Monnet, and Jakub Kicinski.

13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
    Russell King.

14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.

15) Many improvements and simplifications to the NFP driver bpf JIT,
    from Jakub Kicinski.

16) Support for ipv6 non-equal cost multipath routing, from Ido
    Schimmel.

17) Add resource abstration to devlink, from Arkadi Sharshevsky.

18) Packet scheduler classifier shared filter block support, from Jiri
    Pirko.

19) Avoid locking in act_csum, from Davide Caratti.

20) devinet_ioctl() simplifications from Al viro.

21) More TCP bpf improvements from Lawrence Brakmo.

22) Add support for onlink ipv6 route flag, similar to ipv4, from David
    Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
  tls: Add support for encryption using async offload accelerator
  ip6mr: fix stale iterator
  net/sched: kconfig: Remove blank help texts
  openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
  tcp_nv: fix potential integer overflow in tcpnv_acked
  r8169: fix RTL8168EP take too long to complete driver initialization.
  qmi_wwan: Add support for Quectel EP06
  rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
  ipmr: Fix ptrdiff_t print formatting
  ibmvnic: Wait for device response when changing MAC
  qlcnic: fix deadlock bug
  tcp: release sk_frag.page in tcp_disconnect
  ipv4: Get the address of interface correctly.
  net_sched: gen_estimator: fix lockdep splat
  net: macb: Handle HRESP error
  net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
  ipv6: addrconf: break critical section in addrconf_verify_rtnl()
  ipv6: change route cache aging logic
  i40e/i40evf: Update DESC_NEEDED value to reflect larger value
  bnxt_en: cleanup DIM work on device shutdown
  ...

1 files changed, 39 insertions, 34 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index f3da32f..7faed83 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -21,10 +21,6 @@
 #include <linux/firmware.h>
 #include "firmware.h"
 
-#define SDIO_FUNC_0		0
-#define SDIO_FUNC_1		1
-#define SDIO_FUNC_2		2
-
 #define SDIOD_FBR_SIZE		0x100
 
 /* io_en */
@@ -39,28 +35,29 @@
 #define INTR_STATUS_FUNC1	0x2
 #define INTR_STATUS_FUNC2	0x4
 
-/* Maximum number of I/O funcs */
-#define SDIOD_MAX_IOFUNCS	7
-
 /* mask of register map */
 #define REG_F0_REG_MASK		0x7FF
 #define REG_F1_MISC_MASK	0x1FFFF
 
-/* as of sdiod rev 0, supports 3 functions */
-#define SBSDIO_NUM_FUNCTION		3
-
 /* function 0 vendor specific CCCR registers */
+
 #define SDIO_CCCR_BRCM_CARDCAP			0xf0
-#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	0x02
-#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	0x04
-#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	0x08
-#define SDIO_CCCR_BRCM_CARDCTRL		0xf1
-#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	0x02
-#define SDIO_CCCR_BRCM_SEPINT			0xf2
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	BIT(1)
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	BIT(2)
+#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	BIT(3)
+
+/* Interrupt enable bits for each function */
+#define SDIO_CCCR_IEN_FUNC0			BIT(0)
+#define SDIO_CCCR_IEN_FUNC1			BIT(1)
+#define SDIO_CCCR_IEN_FUNC2			BIT(2)
+
+#define SDIO_CCCR_BRCM_CARDCTRL			0xf1
+#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	BIT(1)
 
-#define  SDIO_SEPINT_MASK		0x01
-#define  SDIO_SEPINT_OE			0x02
-#define  SDIO_SEPINT_ACT_HI		0x04
+#define SDIO_CCCR_BRCM_SEPINT			0xf2
+#define SDIO_CCCR_BRCM_SEPINT_MASK		BIT(0)
+#define SDIO_CCCR_BRCM_SEPINT_OE		BIT(1)
+#define SDIO_CCCR_BRCM_SEPINT_ACT_HI		BIT(2)
 
 /* function 1 miscellaneous registers */
 
@@ -131,11 +128,6 @@
 /* with b15, maps to 32-bit SB access */
 #define SBSDIO_SB_ACCESS_2_4B_FLAG	0x08000
 
-/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
-
-#define SBSDIO_SBADDRLOW_MASK		0x80	/* Valid bits in SBADDRLOW */
-#define SBSDIO_SBADDRMID_MASK		0xff	/* Valid bits in SBADDRMID */
-#define SBSDIO_SBADDRHIGH_MASK		0xffU	/* Valid bits in SBADDRHIGH */
 /* Address bits from SBADDR regs */
 #define SBSDIO_SBWINDOW_MASK		0xffff8000
 
@@ -178,9 +170,10 @@ struct brcmf_sdio;
 struct brcmf_sdiod_freezer;
 
 struct brcmf_sdio_dev {
-	struct sdio_func *func[SDIO_MAX_FUNCS];
-	u8 num_funcs;			/* Supported funcs on client */
+	struct sdio_func *func1;
+	struct sdio_func *func2;
 	u32 sbwad;			/* Save backplane window address */
+	struct brcmf_core *cc_core;	/* chipcommon core info struct */
 	struct brcmf_sdio *bus;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
@@ -296,13 +289,24 @@ struct sdpcmd_regs {
 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
-/* sdio device register access interface */
-u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
-void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
-		       int *ret);
-void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
-		       int *ret);
+/* SDIO device register access interface */
+/* Accessors for SDIO Function 0 */
+#define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
+	sdio_f0_readb((sdiodev)->func1, (addr), (r))
+
+#define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
+	sdio_f0_writeb((sdiodev)->func1, (v), (addr), (ret))
+
+/* Accessors for SDIO Function 1 */
+#define brcmf_sdiod_readb(sdiodev, addr, r) \
+	sdio_readb((sdiodev)->func1, (addr), (r))
+
+#define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
+	sdio_writeb((sdiodev)->func1, (v), (addr), (ret))
+
+u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
+			int *ret);
 
 /* Buffer transfer to/from device (client) core via cmd53.
  *   fn:       function number
@@ -342,7 +346,8 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		      u8 *data, uint size);
 
 /* Issue an abort to the specified function */
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
+
 void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
 			      enum brcmf_sdiod_state state);