brcm80211: smac: remove mapped core related function from aiutils.c

In aiutils.c the selected core was maintained by its index number. This
is obsolete using BCMA functions so several functions using that index
have been removed.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 3 insertions, 118 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index a99a163..f78350a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -477,50 +477,6 @@ static void ai_scan(struct si_pub *sih, struct bcma_bus *bus)
 	}
 }
 
-static struct bcma_device *ai_find_bcma_core(struct si_pub *sih, uint coreidx)
-{
-	struct si_info *sii = (struct si_info *)sih;
-	struct bcma_device *core;
-
-	list_for_each_entry(core, &sii->icbus->cores, list) {
-		if (core->core_index == coreidx)
-			return core;
-	}
-	return NULL;
-}
-/*
- * This function changes the logical "focus" to the indicated core.
- * Return the current core's virtual address. Since each core starts with the
- * same set of registers (BIST, clock control, etc), the returned address
- * contains the first register of this 'common' register block (not to be
- * confused with 'common core').
- */
-void __iomem *ai_setcoreidx(struct si_pub *sih, uint coreidx)
-{
-	struct si_info *sii = (struct si_info *)sih;
-	struct bcma_device *core;
-
-	if (sii->curidx != coreidx) {
-		core = ai_find_bcma_core(sih, coreidx);
-		if (core == NULL)
-			return NULL;
-
-		(void)bcma_aread32(core, BCMA_IOST);
-		sii->curidx = coreidx;
-	}
-	return sii->curmap;
-}
-
-uint ai_corerev(struct si_pub *sih)
-{
-	struct si_info *sii;
-	u32 cib;
-
-	sii = (struct si_info *)sih;
-	cib = sii->cib[sii->curidx];
-	return (cib & CIB_REV_MASK) >> CIB_REV_SHIFT;
-}
-
 /* return true if PCIE capability exists in the pci config space */
 static bool ai_ispcie(struct si_info *sii)
 {
@@ -579,9 +535,8 @@ ai_buscore_setup(struct si_info *sii, struct bcma_device *cc)
 	for (i = 0; i < sii->numcores; i++) {
 		uint cid, crev;
 
-		ai_setcoreidx(&sii->pub, i);
-		cid = ai_coreid(&sii->pub);
-		crev = ai_corerev(&sii->pub);
+		cid = sii->coreid[i];
+		crev = (sii->cib[i] & CIB_REV_MASK) >> CIB_REV_SHIFT;
 
 		if (cid == PCI_CORE_ID) {
 			pciidx = i;
@@ -804,22 +759,6 @@ void ai_detach(struct si_pub *sih)
 	kfree(sii);
 }
 
-uint ai_coreid(struct si_pub *sih)
-{
-	struct si_info *sii;
-
-	sii = (struct si_info *)sih;
-	return sii->coreid[sii->curidx];
-}
-
-uint ai_coreidx(struct si_pub *sih)
-{
-	struct si_info *sii;
-
-	sii = (struct si_info *)sih;
-	return sii->curidx;
-}
-
 /* return index of coreid or BADIDX if not found */
 struct bcma_device *ai_findcore(struct si_pub *sih, u16 coreid, u16 coreunit)
 {
@@ -842,45 +781,17 @@ struct bcma_device *ai_findcore(struct si_pub *sih, u16 coreid, u16 coreunit)
 }
 
 /*
- * This function changes logical "focus" to the indicated core;
- * must be called with interrupts off.
- * Moreover, callers should keep interrupts off during switching
- * out of and back to d11 core.
- */
-void __iomem *ai_setcore(struct si_pub *sih, uint coreid, uint coreunit)
-{
-	struct bcma_device *core;
-
-	core = ai_findcore(sih, coreid, coreunit);
-	if (core == NULL)
-		return NULL;
-
-	return ai_setcoreidx(sih, core->core_index);
-}
-
-/*
- * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set
- * operation, switch back to the original core, and return the new value.
- *
- * When using the silicon backplane, no fiddling with interrupts or core
- * switches is needed.
- *
- * Also, when using pci/pcie, we can optimize away the core switching for pci
- * registers and (on newer pci cores) chipcommon registers.
+ * read/modify chipcommon core register.
  */
 uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
 {
 	struct bcma_device *cc;
-	uint origidx = 0;
 	u32 w;
 	struct si_info *sii;
 
 	sii = (struct si_info *)sih;
 	cc = sii->icbus->drv_cc.core;
 
-	/* save current core index */
-	origidx = ai_coreidx(&sii->pub);
-
 	/* mask and set */
 	if (mask || val) {
 		bcma_maskset32(cc, regoff, ~mask, val);
@@ -889,9 +800,6 @@ uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val)
 	/* readback */
 	w = bcma_read32(cc, regoff);
 
-	/* restore core index */
-	ai_setcoreidx(&sii->pub, origidx);
-
 	return w;
 }
 
@@ -1237,20 +1145,10 @@ void ai_pci_down(struct si_pub *sih)
 void ai_pci_setup(struct si_pub *sih, uint coremask)
 {
 	struct si_info *sii;
-	struct sbpciregs __iomem *regs = NULL;
 	u32 w;
-	uint idx = 0;
 
 	sii = (struct si_info *)sih;
 
-	if (PCI(sih)) {
-		/* get current core index */
-		idx = sii->curidx;
-
-		/* switch over to pci core */
-		regs = ai_setcoreidx(sih, sii->buscoreidx);
-	}
-
 	/*
 	 * Enable sb->pci interrupts.  Assume
 	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
@@ -1264,9 +1162,6 @@ void ai_pci_setup(struct si_pub *sih, uint coremask)
 
 	if (PCI(sih)) {
 		pcicore_pci_setup(sii->pch);
-
-		/* switch back to previous core */
-		ai_setcoreidx(sih, idx);
 	}
 }
 
@@ -1276,21 +1171,11 @@ void ai_pci_setup(struct si_pub *sih, uint coremask)
  */
 int ai_pci_fixcfg(struct si_pub *sih)
 {
-	uint origidx;
-	void __iomem *regs = NULL;
 	struct si_info *sii = (struct si_info *)sih;
 
 	/* Fixup PI in SROM shadow area to enable the correct PCI core access */
-	/* save the current index */
-	origidx = ai_coreidx(&sii->pub);
-
 	/* check 'pi' is correct and fix it if not */
-	regs = ai_setcore(&sii->pub, ai_get_buscoretype(sih), 0);
 	pcicore_fixcfg(sii->pch);
-
-	/* restore the original index */
-	ai_setcoreidx(&sii->pub, origidx);
-
 	pcicore_hwup(sii->pch);
 	return 0;
 }