brcmfmac: always use worker thread for tx data.

When fw signalling is disabled tx is sent immediately. Using
queues and worker thread allows usb to do synchronous autopm. This
patch makes fws use queues and worker thread even if signalling is
not supported by FW or not enabled.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 52 insertions, 44 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 438c7b9..15fc807 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -425,6 +425,7 @@ struct brcmf_fws_info {
 	struct brcmf_fws_stats stats;
 	struct brcmf_fws_hanger hanger;
 	enum brcmf_fws_fcmode fcmode;
+	bool fw_signals;
 	bool bcmc_credit_check;
 	struct brcmf_fws_macdesc_table desc;
 	struct workqueue_struct *fws_wq;
@@ -1160,7 +1161,8 @@ static void brcmf_fws_return_credits(struct brcmf_fws_info *fws,
 static void brcmf_fws_schedule_deq(struct brcmf_fws_info *fws)
 {
 	/* only schedule dequeue when there are credits for delayed traffic */
-	if (fws->fifo_credit_map & fws->fifo_delay_map)
+	if ((fws->fifo_credit_map & fws->fifo_delay_map) ||
+	    (!brcmf_fws_fc_active(fws) && fws->fifo_delay_map))
 		queue_work(fws->fws_wq, &fws->fws_dequeue_work);
 }
 
@@ -1498,8 +1500,10 @@ int brcmf_fws_hdrpull(struct brcmf_pub *drvr, int ifidx, s16 signal_len,
 
 	WARN_ON(signal_len > skb->len);
 
+	if (!signal_len)
+		return 0;
 	/* if flow control disabled, skip to packet data and leave */
-	if (!signal_len || !drvr->fw_signals) {
+	if (!fws->fw_signals) {
 		skb_pull(skb, signal_len);
 		return 0;
 	}
@@ -1749,7 +1753,6 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	int fifo = BRCMF_FWS_FIFO_BCMC;
 	bool multicast = is_multicast_ether_addr(eh->h_dest);
 	bool pae = eh->h_proto == htons(ETH_P_PAE);
-	int ret;
 
 	brcmf_dbg(DATA, "tx proto=0x%X\n", ntohs(eh->h_proto));
 	/* determine the priority */
@@ -1760,17 +1763,6 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	if (pae)
 		atomic_inc(&ifp->pend_8021x_cnt);
 
-	if (!brcmf_fws_fc_active(fws)) {
-		/* If the protocol uses a data header, apply it */
-		brcmf_proto_hdrpush(drvr, ifp->ifidx, 0, skb);
-
-		/* Use bus module to send data frame */
-		ret = brcmf_bus_txdata(drvr->bus_if, skb);
-		if (ret < 0)
-			brcmf_txfinalize(drvr, skb, false);
-		return ret;
-	}
-
 	/* set control buffer information */
 	skcb->if_flags = 0;
 	skcb->state = BRCMF_FWS_SKBSTATE_NEW;
@@ -1818,7 +1810,7 @@ void brcmf_fws_add_interface(struct brcmf_if *ifp)
 	struct brcmf_fws_info *fws = ifp->drvr->fws;
 	struct brcmf_fws_mac_descriptor *entry;
 
-	if (!ifp->ndev || !ifp->drvr->fw_signals)
+	if (!ifp->ndev)
 		return;
 
 	entry = &fws->desc.iface[ifp->ifidx];
@@ -1849,15 +1841,38 @@ void brcmf_fws_del_interface(struct brcmf_if *ifp)
 static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 {
 	struct brcmf_fws_info *fws;
+	struct brcmf_pub *drvr;
 	struct sk_buff *skb;
 	ulong flags;
 	int fifo;
+	u32 hslot;
+	u32 ifidx;
+	int ret;
 
 	fws = container_of(worker, struct brcmf_fws_info, fws_dequeue_work);
+	drvr = fws->drvr;
 
-	brcmf_fws_lock(fws->drvr, flags);
+	brcmf_fws_lock(drvr, flags);
 	for (fifo = BRCMF_FWS_FIFO_BCMC; fifo >= 0 && !fws->bus_flow_blocked;
 	     fifo--) {
+		if (!brcmf_fws_fc_active(fws)) {
+			while ((skb = brcmf_fws_deq(fws, fifo)) != NULL) {
+				hslot = brcmf_skb_htod_tag_get_field(skb,
+								     HSLOT);
+				brcmf_fws_hanger_poppkt(&fws->hanger, hslot,
+							&skb, true);
+				ifidx = brcmf_skb_if_flags_get_field(skb,
+								     INDEX);
+				brcmf_proto_hdrpush(drvr, ifidx, 0, skb);
+				/* Use bus module to send data frame */
+				ret = brcmf_bus_txdata(drvr->bus_if, skb);
+				if (ret < 0)
+					brcmf_txfinalize(drvr, skb, false);
+				if (fws->bus_flow_blocked)
+					break;
+			}
+			continue;
+		}
 		while ((fws->fifo_credit[fifo]) || ((!fws->bcmc_credit_check) &&
 		       (fifo == BRCMF_FWS_FIFO_BCMC))) {
 			skb = brcmf_fws_deq(fws, fifo);
@@ -1885,17 +1900,15 @@ static void brcmf_fws_dequeue_worker(struct work_struct *worker)
 			}
 		}
 	}
-	brcmf_fws_unlock(fws->drvr, flags);
+	brcmf_fws_unlock(drvr, flags);
 }
 
 int brcmf_fws_init(struct brcmf_pub *drvr)
 {
+	struct brcmf_fws_info *fws;
 	u32 tlv = BRCMF_FWS_FLAGS_RSSI_SIGNALS;
 	int rc;
 
-	if (!drvr->fw_signals)
-		return 0;
-
 	spin_lock_init(&drvr->fws_spinlock);
 
 	drvr->fws = kzalloc(sizeof(*(drvr->fws)), GFP_KERNEL);
@@ -1904,20 +1917,21 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 		goto fail;
 	}
 
+	fws = drvr->fws;
 	/* set linkage back */
-	drvr->fws->drvr = drvr;
-	drvr->fws->fcmode = fcmode;
+	fws->drvr = drvr;
+	fws->fcmode = fcmode;
 
-	drvr->fws->fws_wq = create_singlethread_workqueue("brcmf_fws_wq");
-	if (drvr->fws->fws_wq == NULL) {
+	fws->fws_wq = create_singlethread_workqueue("brcmf_fws_wq");
+	if (fws->fws_wq == NULL) {
 		brcmf_err("workqueue creation failed\n");
 		rc = -EBADF;
 		goto fail;
 	}
-	INIT_WORK(&drvr->fws->fws_dequeue_work, brcmf_fws_dequeue_worker);
+	INIT_WORK(&fws->fws_dequeue_work, brcmf_fws_dequeue_worker);
 
 	/* enable firmware signalling if fcmode active */
-	if (drvr->fws->fcmode != BRCMF_FWS_FCMODE_NONE)
+	if (fws->fcmode != BRCMF_FWS_FCMODE_NONE)
 		tlv |= BRCMF_FWS_FLAGS_XONXOFF_SIGNALS |
 		       BRCMF_FWS_FLAGS_CREDIT_STATUS_SIGNALS |
 		       BRCMF_FWS_FLAGS_HOST_PROPTXSTATUS_ACTIVE |
@@ -1937,34 +1951,33 @@ int brcmf_fws_init(struct brcmf_pub *drvr)
 		goto fail;
 	}
 
-	/* setting the iovar may fail if feature is unsupported
+	/* Setting the iovar may fail if feature is unsupported
 	 * so leave the rc as is so driver initialization can
-	 * continue.
+	 * continue. Set mode back to none indicating not enabled.
 	 */
+	fws->fw_signals = true;
 	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "tlv", tlv)) {
 		brcmf_err("failed to set bdcv2 tlv signaling\n");
-		goto fail_event;
+		fws->fcmode = BRCMF_FWS_FCMODE_NONE;
+		fws->fw_signals = false;
 	}
 
 	if (brcmf_fil_iovar_int_set(drvr->iflist[0], "ampdu_hostreorder", 1))
 		brcmf_dbg(INFO, "enabling AMPDU host-reorder failed\n");
 
-	brcmf_fws_hanger_init(&drvr->fws->hanger);
-	brcmf_fws_macdesc_init(&drvr->fws->desc.other, NULL, 0);
-	brcmf_fws_macdesc_set_name(drvr->fws, &drvr->fws->desc.other);
-	brcmu_pktq_init(&drvr->fws->desc.other.psq, BRCMF_FWS_PSQ_PREC_COUNT,
+	brcmf_fws_hanger_init(&fws->hanger);
+	brcmf_fws_macdesc_init(&fws->desc.other, NULL, 0);
+	brcmf_fws_macdesc_set_name(fws, &fws->desc.other);
+	brcmu_pktq_init(&fws->desc.other.psq, BRCMF_FWS_PSQ_PREC_COUNT,
 			BRCMF_FWS_PSQ_LEN);
 
 	/* create debugfs file for statistics */
-	brcmf_debugfs_create_fws_stats(drvr, &drvr->fws->stats);
+	brcmf_debugfs_create_fws_stats(drvr, &fws->stats);
 
 	brcmf_dbg(INFO, "%s bdcv2 tlv signaling [%x]\n",
-		  drvr->fw_signals ? "enabled" : "disabled", tlv);
+		  fws->fw_signals ? "enabled" : "disabled", tlv);
 	return 0;
 
-fail_event:
-	brcmf_fweh_unregister(drvr, BRCMF_E_BCMC_CREDIT_SUPPORT);
-	brcmf_fweh_unregister(drvr, BRCMF_E_FIFO_CREDIT_MAP);
 fail:
 	brcmf_fws_deinit(drvr);
 	return rc;
@@ -1978,11 +1991,6 @@ void brcmf_fws_deinit(struct brcmf_pub *drvr)
 	if (!fws)
 		return;
 
-	/* disable firmware signalling entirely
-	 * to avoid using the workqueue.
-	 */
-	drvr->fw_signals = false;
-
 	if (drvr->fws->fws_wq)
 		destroy_workqueue(drvr->fws->fws_wq);
 
@@ -1998,7 +2006,7 @@ void brcmf_fws_deinit(struct brcmf_pub *drvr)
 
 bool brcmf_fws_fc_active(struct brcmf_fws_info *fws)
 {
-	if (!fws)
+	if (!fws->creditmap_received)
 		return false;
 
 	return fws->fcmode != BRCMF_FWS_FCMODE_NONE;