ath9k: add TX99 support

TX99 support enables Specific Absorption Rate (SAR) testing.
SAR is the unit of measurement for the amount of radio frequency(RF)
absorbed by the body when using a wireless device. The RF
exposure limits used are expressed in the terms of SAR, which is a
measure of the electric and magnetic field strength and power density
for transmitters operating at frequencies from 300 kHz to 100 GHz.

Regulatory bodies around the world require that wireless device
be evaluated to meet the RF exposure limits set forth in the
governmental SAR regulations.

In the examples below, for more bit rate options see the iw TX bitrate
setting documentation:

http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates

Example usage:

iw phy phy0 interface add moni0 type monitor
ip link set dev moni0 up

iw dev moni0 set channel 36 HT40+
iw set bitrates mcs-5 4

echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power
echo 1  > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 14 insertions, 12 deletions

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index ba02ef2..e89db64 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -682,6 +682,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 
 	common = ath9k_hw_common(ah);
 	sc->dfs_detector = dfs_pattern_detector_init(common, NL80211_DFS_UNSET);
+	sc->tx99_power = MAX_RATE_POWER + 1;
 
 	if (!pdata) {
 		ah->ah_flags |= AH_USE_EEPROM;
@@ -785,6 +786,7 @@ err_queues:
 	ath9k_hw_deinit(ah);
 err_hw:
 	ath9k_eeprom_release(sc);
+	dev_kfree_skb_any(sc->tx99_skb);
 	return ret;
 }
 
@@ -842,7 +844,6 @@ static const struct ieee80211_iface_limit if_limits[] = {
 				 BIT(NL80211_IFTYPE_P2P_GO) },
 };
 
-
 static const struct ieee80211_iface_limit if_dfs_limits[] = {
 	{ .max = 1,	.types = BIT(NL80211_IFTYPE_AP) },
 };
@@ -903,17 +904,18 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 
 	hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
 
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_P2P_GO) |
-		BIT(NL80211_IFTYPE_P2P_CLIENT) |
-		BIT(NL80211_IFTYPE_AP) |
-		BIT(NL80211_IFTYPE_WDS) |
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC) |
-		BIT(NL80211_IFTYPE_MESH_POINT);
-
-	hw->wiphy->iface_combinations = if_comb;
-	hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
+	if (!config_enabled(CONFIG_ATH9K_TX99)) {
+		hw->wiphy->interface_modes =
+			BIT(NL80211_IFTYPE_P2P_GO) |
+			BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			BIT(NL80211_IFTYPE_AP) |
+			BIT(NL80211_IFTYPE_WDS) |
+			BIT(NL80211_IFTYPE_STATION) |
+			BIT(NL80211_IFTYPE_ADHOC) |
+			BIT(NL80211_IFTYPE_MESH_POINT);
+		hw->wiphy->iface_combinations = if_comb;
+		hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
+	}
 
 	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;