diff options
author | Luis R. Rodriguez <lrodriguez@atheros.com> | 2010-05-13 13:33:43 -0400 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2010-06-02 16:13:00 -0400 |
commit | aea702b70ae0964c16e17944e4a5ce2c2b038ced (patch) | |
tree | 8d4bcd9197d442e293a0479fbab3297df95da859 /drivers/net/wireless/ath/ath9k/ar9003_phy.c | |
parent | ec8aa669b8393b6789b1954d587c63264af7ff99 (diff) | |
download | op-kernel-dev-aea702b70ae0964c16e17944e4a5ce2c2b038ced.zip op-kernel-dev-aea702b70ae0964c16e17944e4a5ce2c2b038ced.tar.gz |
ath9k_hw: add support for the AR9003 baseband watchdog
The baseband watchdog will monitor blocks of the baseband
through timers and will issue an interrupt when things are
detected to be stalled. It is only available on the AR9003
family.
Cc: Sam Ng <sam.ng@atheros.com>
Cc: Paul Shaw <paul.shaw@atheros.com>
Cc: Don Breslin <don.breslin@atheros.com>
Cc: Cliff Holden <cliff.holden@atheros.com
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_phy.c')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_phy.c | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 80431a2..c714579 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1132,3 +1132,122 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) priv_ops->do_getnf = ar9003_hw_do_getnf; priv_ops->loadnf = ar9003_hw_loadnf; } + +void ar9003_hw_bb_watchdog_config(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 idle_tmo_ms = ah->bb_watchdog_timeout_ms; + u32 val, idle_count; + + if (!idle_tmo_ms) { + /* disable IRQ, disable chip-reset for BB panic */ + REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2, + REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) & + ~(AR_PHY_WATCHDOG_RST_ENABLE | + AR_PHY_WATCHDOG_IRQ_ENABLE)); + + /* disable watchdog in non-IDLE mode, disable in IDLE mode */ + REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1, + REG_READ(ah, AR_PHY_WATCHDOG_CTL_1) & + ~(AR_PHY_WATCHDOG_NON_IDLE_ENABLE | + AR_PHY_WATCHDOG_IDLE_ENABLE)); + + ath_print(common, ATH_DBG_RESET, "Disabled BB Watchdog\n"); + return; + } + + /* enable IRQ, disable chip-reset for BB watchdog */ + val = REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) & AR_PHY_WATCHDOG_CNTL2_MASK; + REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2, + (val | AR_PHY_WATCHDOG_IRQ_ENABLE) & + ~AR_PHY_WATCHDOG_RST_ENABLE); + + /* bound limit to 10 secs */ + if (idle_tmo_ms > 10000) + idle_tmo_ms = 10000; + + /* + * The time unit for watchdog event is 2^15 44/88MHz cycles. + * + * For HT20 we have a time unit of 2^15/44 MHz = .74 ms per tick + * For HT40 we have a time unit of 2^15/88 MHz = .37 ms per tick + * + * Given we use fast clock now in 5 GHz, these time units should + * be common for both 2 GHz and 5 GHz. + */ + idle_count = (100 * idle_tmo_ms) / 74; + if (ah->curchan && IS_CHAN_HT40(ah->curchan)) + idle_count = (100 * idle_tmo_ms) / 37; + + /* + * enable watchdog in non-IDLE mode, disable in IDLE mode, + * set idle time-out. + */ + REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1, + AR_PHY_WATCHDOG_NON_IDLE_ENABLE | + AR_PHY_WATCHDOG_IDLE_MASK | + (AR_PHY_WATCHDOG_NON_IDLE_MASK & (idle_count << 2))); + + ath_print(common, ATH_DBG_RESET, + "Enabled BB Watchdog timeout (%u ms)\n", + idle_tmo_ms); +} + +void ar9003_hw_bb_watchdog_read(struct ath_hw *ah) +{ + /* + * we want to avoid printing in ISR context so we save the + * watchdog status to be printed later in bottom half context. + */ + ah->bb_watchdog_last_status = REG_READ(ah, AR_PHY_WATCHDOG_STATUS); + + /* + * the watchdog timer should reset on status read but to be sure + * sure we write 0 to the watchdog status bit. + */ + REG_WRITE(ah, AR_PHY_WATCHDOG_STATUS, + ah->bb_watchdog_last_status & ~AR_PHY_WATCHDOG_STATUS_CLR); +} + +void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 rxc_pcnt = 0, rxf_pcnt = 0, txf_pcnt = 0, status; + + if (likely(!(common->debug_mask & ATH_DBG_RESET))) + return; + + status = ah->bb_watchdog_last_status; + ath_print(common, ATH_DBG_RESET, + "\n==== BB update: BB status=0x%08x ====\n", status); + ath_print(common, ATH_DBG_RESET, + "** BB state: wd=%u det=%u rdar=%u rOFDM=%d " + "rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n", + MS(status, AR_PHY_WATCHDOG_INFO), + MS(status, AR_PHY_WATCHDOG_DET_HANG), + MS(status, AR_PHY_WATCHDOG_RADAR_SM), + MS(status, AR_PHY_WATCHDOG_RX_OFDM_SM), + MS(status, AR_PHY_WATCHDOG_RX_CCK_SM), + MS(status, AR_PHY_WATCHDOG_TX_OFDM_SM), + MS(status, AR_PHY_WATCHDOG_TX_CCK_SM), + MS(status, AR_PHY_WATCHDOG_AGC_SM), + MS(status,AR_PHY_WATCHDOG_SRCH_SM)); + + ath_print(common, ATH_DBG_RESET, + "** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n", + REG_READ(ah, AR_PHY_WATCHDOG_CTL_1), + REG_READ(ah, AR_PHY_WATCHDOG_CTL_2)); + ath_print(common, ATH_DBG_RESET, + "** BB mode: BB_gen_controls=0x%08x **\n", + REG_READ(ah, AR_PHY_GEN_CTRL)); + + if (ath9k_hw_GetMibCycleCountsPct(ah, &rxc_pcnt, &rxf_pcnt, &txf_pcnt)) + ath_print(common, ATH_DBG_RESET, + "** BB busy times: rx_clear=%d%%, " + "rx_frame=%d%%, tx_frame=%d%% **\n", + rxc_pcnt, rxf_pcnt, txf_pcnt); + + ath_print(common, ATH_DBG_RESET, + "==== BB update: done ====\n\n"); +} +EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info); |