ath6kl: Fix 4-way handshake failure in AP and P2P GO mode

RSN capability field of RSN IE which is generated (which is what really
advertised in beacon/probe response) differs from the one generated in
wpa_supplicant. This inconsistency in rsn IE results in 4-way handshake
failure. To fix this, configure rsn capability used in wpa_supplicant
in firmware using a new wmi command, WMI_SET_IE_CMDID. There is a bit
(ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE) in fw_capabilities to advertise
this support to driver.

Signed-off-by: Subramania Sharma <sharmat@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 64 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 9009930..86d388f 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2548,6 +2548,52 @@ static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
 	return 0;
 }
 
+static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon,
+				u8 *rsn_capab)
+{
+	const u8 *rsn_ie;
+	size_t rsn_ie_len;
+	u16 cnt;
+
+	if (!beacon->tail)
+		return -EINVAL;
+
+	rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, beacon->tail, beacon->tail_len);
+	if (!rsn_ie)
+		return -EINVAL;
+
+	rsn_ie_len = *(rsn_ie + 1);
+	/* skip element id and length */
+	rsn_ie += 2;
+
+	/* skip version, group cipher */
+	if (rsn_ie_len < 6)
+		return -EINVAL;
+	rsn_ie +=  6;
+	rsn_ie_len -= 6;
+
+	/* skip pairwise cipher suite */
+	if (rsn_ie_len < 2)
+		return -EINVAL;
+	cnt = *((u16 *) rsn_ie);
+	rsn_ie += (2 + cnt * 4);
+	rsn_ie_len -= (2 + cnt * 4);
+
+	/* skip akm suite */
+	if (rsn_ie_len < 2)
+		return -EINVAL;
+	cnt = *((u16 *) rsn_ie);
+	rsn_ie += (2 + cnt * 4);
+	rsn_ie_len -= (2 + cnt * 4);
+
+	if (rsn_ie_len < 2)
+		return -EINVAL;
+
+	memcpy(rsn_capab, rsn_ie, 2);
+
+	return 0;
+}
+
 static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 			   struct cfg80211_ap_settings *info)
 {
@@ -2560,6 +2606,7 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 	struct wmi_connect_cmd p;
 	int res;
 	int i, ret;
+	u16 rsn_capab = 0;
 
 	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s:\n", __func__);
 
@@ -2700,6 +2747,23 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 			     vif->next_ch_type != NL80211_CHAN_NO_HT))
 		return -EIO;
 
+	/*
+	 * Get the PTKSA replay counter in the RSN IE. Supplicant
+	 * will use the RSN IE in M3 message and firmware has to
+	 * advertise the same in beacon/probe response. Send
+	 * the complete RSN IE capability field to firmware
+	 */
+	if (!ath6kl_get_rsn_capab(&info->beacon, (u8 *) &rsn_capab) &&
+	    test_bit(ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE,
+		     ar->fw_capabilities)) {
+		res = ath6kl_wmi_set_ie_cmd(ar->wmi, vif->fw_vif_idx,
+					    WLAN_EID_RSN, WMI_RSN_IE_CAPB,
+					    (const u8 *) &rsn_capab,
+					    sizeof(rsn_capab));
+		if (res < 0)
+			return res;
+	}
+
 	res = ath6kl_wmi_ap_profile_commit(ar->wmi, vif->fw_vif_idx, &p);
 	if (res < 0)
 		return res;