diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-08 07:55:01 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-12-08 07:55:01 -0800 |
commit | d7fc02c7bae7b1cf69269992cf880a43a350cdaa (patch) | |
tree | a43d56fa72913a1cc98a0bbebe054d08581b3a7c /drivers/net/wimax/i2400m/fw.c | |
parent | ee1262dbc65ce0b6234a915d8432171e8d77f518 (diff) | |
parent | 28b4d5cc17c20786848cdc07b7ea237a309776bb (diff) | |
download | op-kernel-dev-d7fc02c7bae7b1cf69269992cf880a43a350cdaa.zip op-kernel-dev-d7fc02c7bae7b1cf69269992cf880a43a350cdaa.tar.gz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
mac80211: fix reorder buffer release
iwmc3200wifi: Enable wimax core through module parameter
iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
iwmc3200wifi: Coex table command does not expect a response
iwmc3200wifi: Update wiwi priority table
iwlwifi: driver version track kernel version
iwlwifi: indicate uCode type when fail dump error/event log
iwl3945: remove duplicated event logging code
b43: fix two warnings
ipw2100: fix rebooting hang with driver loaded
cfg80211: indent regulatory messages with spaces
iwmc3200wifi: fix NULL pointer dereference in pmkid update
mac80211: Fix TX status reporting for injected data frames
ath9k: enable 2GHz band only if the device supports it
airo: Fix integer overflow warning
rt2x00: Fix padding bug on L2PAD devices.
WE: Fix set events not propagated
b43legacy: avoid PPC fault during resume
b43: avoid PPC fault during resume
tcp: fix a timewait refcnt race
...
Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
kernel/sysctl_check.c
net/ipv4/sysctl_net_ipv4.c
net/ipv6/addrconf.c
net/sctp/sysctl.c
Diffstat (limited to 'drivers/net/wimax/i2400m/fw.c')
-rw-r--r-- | drivers/net/wimax/i2400m/fw.c | 886 |
1 files changed, 729 insertions, 157 deletions
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index e81750e..64cdfeb 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -40,11 +40,9 @@ * * THE PROCEDURE * - * (this is decribed for USB, but for SDIO is similar) - * - * The 2400m works in two modes: boot-mode or normal mode. In boot - * mode we can execute only a handful of commands targeted at - * uploading the firmware and launching it. + * The 2400m and derived devices work in two modes: boot-mode or + * normal mode. In boot mode we can execute only a handful of commands + * targeted at uploading the firmware and launching it. * * The 2400m enters boot mode when it is first connected to the * system, when it crashes and when you ask it to reboot. There are @@ -52,18 +50,26 @@ * firmwares signed with a certain private key, non-signed takes any * firmware. Normal hardware takes only signed firmware. * - * Upon entrance to boot mode, the device sends a few zero length - * packets (ZLPs) on the notification endpoint, then a reboot barker - * (4 le32 words with value I2400M_{S,N}BOOT_BARKER). We ack it by - * sending the same barker on the bulk out endpoint. The device acks - * with a reboot ack barker (4 le32 words with value 0xfeedbabe) and - * then the device is fully rebooted. At this point we can upload the - * firmware. + * On boot mode, in USB, we write to the device using the bulk out + * endpoint and read from it in the notification endpoint. In SDIO we + * talk to it via the write address and read from the read address. + * + * Upon entrance to boot mode, the device sends (preceeded with a few + * zero length packets (ZLPs) on the notification endpoint in USB) a + * reboot barker (4 le32 words with the same value). We ack it by + * sending the same barker to the device. The device acks with a + * reboot ack barker (4 le32 words with value I2400M_ACK_BARKER) and + * then is fully booted. At this point we can upload the firmware. + * + * Note that different iterations of the device and EEPROM + * configurations will send different [re]boot barkers; these are + * collected in i2400m_barker_db along with the firmware + * characteristics they require. * * This process is accomplished by the i2400m_bootrom_init() * function. All the device interaction happens through the * i2400m_bm_cmd() [boot mode command]. Special return values will - * indicate if the device resets. + * indicate if the device did reset during the process. * * After this, we read the MAC address and then (if needed) * reinitialize the device. We need to read it ahead of time because @@ -72,11 +78,11 @@ * * We can then upload the firmware file. The file is composed of a BCF * header (basic data, keys and signatures) and a list of write - * commands and payloads. We first upload the header - * [i2400m_dnload_init()] and then pass the commands and payloads - * verbatim to the i2400m_bm_cmd() function - * [i2400m_dnload_bcf()]. Then we tell the device to jump to the new - * firmware [i2400m_dnload_finalize()]. + * commands and payloads. Optionally more BCF headers might follow the + * main payload. We first upload the header [i2400m_dnload_init()] and + * then pass the commands and payloads verbatim to the i2400m_bm_cmd() + * function [i2400m_dnload_bcf()]. Then we tell the device to jump to + * the new firmware [i2400m_dnload_finalize()]. * * Once firmware is uploaded, we are good to go :) * @@ -99,18 +105,32 @@ * read an acknolwedgement from it (or an asynchronous notification) * from it. * + * FIRMWARE LOADING + * + * Note that in some cases, we can't just load a firmware file (for + * example, when resuming). For that, we might cache the firmware + * file. Thus, when doing the bootstrap, if there is a cache firmware + * file, it is used; if not, loading from disk is attempted. + * * ROADMAP * + * i2400m_barker_db_init Called by i2400m_driver_init() + * i2400m_barker_db_add + * + * i2400m_barker_db_exit Called by i2400m_driver_exit() + * * i2400m_dev_bootstrap Called by __i2400m_dev_start() * request_firmware - * i2400m_fw_check - * i2400m_fw_dnload + * i2400m_fw_bootstrap + * i2400m_fw_check + * i2400m_fw_hdr_check + * i2400m_fw_dnload * release_firmware * * i2400m_fw_dnload * i2400m_bootrom_init * i2400m_bm_cmd - * i2400m->bus_reset + * i2400m_reset * i2400m_dnload_init * i2400m_dnload_init_signed * i2400m_dnload_init_nonsigned @@ -125,9 +145,14 @@ * i2400m->bus_bm_cmd_send() * i2400m->bus_bm_wait_for_ack * __i2400m_bm_ack_verify + * i2400m_is_boot_barker * * i2400m_bm_cmd_prepare Used by bus-drivers to prep * commands before sending + * + * i2400m_pm_notifier Called on Power Management events + * i2400m_fw_cache + * i2400m_fw_uncache */ #include <linux/firmware.h> #include <linux/sched.h> @@ -175,6 +200,240 @@ EXPORT_SYMBOL_GPL(i2400m_bm_cmd_prepare); /* + * Database of known barkers. + * + * A barker is what the device sends indicating he is ready to be + * bootloaded. Different versions of the device will send different + * barkers. Depending on the barker, it might mean the device wants + * some kind of firmware or the other. + */ +static struct i2400m_barker_db { + __le32 data[4]; +} *i2400m_barker_db; +static size_t i2400m_barker_db_used, i2400m_barker_db_size; + + +static +int i2400m_zrealloc_2x(void **ptr, size_t *_count, size_t el_size, + gfp_t gfp_flags) +{ + size_t old_count = *_count, + new_count = old_count ? 2 * old_count : 2, + old_size = el_size * old_count, + new_size = el_size * new_count; + void *nptr = krealloc(*ptr, new_size, gfp_flags); + if (nptr) { + /* zero the other half or the whole thing if old_count + * was zero */ + if (old_size == 0) + memset(nptr, 0, new_size); + else + memset(nptr + old_size, 0, old_size); + *_count = new_count; + *ptr = nptr; + return 0; + } else + return -ENOMEM; +} + + +/* + * Add a barker to the database + * + * This cannot used outside of this module and only at at module_init + * time. This is to avoid the need to do locking. + */ +static +int i2400m_barker_db_add(u32 barker_id) +{ + int result; + + struct i2400m_barker_db *barker; + if (i2400m_barker_db_used >= i2400m_barker_db_size) { + result = i2400m_zrealloc_2x( + (void **) &i2400m_barker_db, &i2400m_barker_db_size, + sizeof(i2400m_barker_db[0]), GFP_KERNEL); + if (result < 0) + return result; + } + barker = i2400m_barker_db + i2400m_barker_db_used++; + barker->data[0] = le32_to_cpu(barker_id); + barker->data[1] = le32_to_cpu(barker_id); + barker->data[2] = le32_to_cpu(barker_id); + barker->data[3] = le32_to_cpu(barker_id); + return 0; +} + + +void i2400m_barker_db_exit(void) +{ + kfree(i2400m_barker_db); + i2400m_barker_db = NULL; + i2400m_barker_db_size = 0; + i2400m_barker_db_used = 0; +} + + +/* + * Helper function to add all the known stable barkers to the barker + * database. + */ +static +int i2400m_barker_db_known_barkers(void) +{ + int result; + + result = i2400m_barker_db_add(I2400M_NBOOT_BARKER); + if (result < 0) + goto error_add; + result = i2400m_barker_db_add(I2400M_SBOOT_BARKER); + if (result < 0) + goto error_add; + result = i2400m_barker_db_add(I2400M_SBOOT_BARKER_6050); + if (result < 0) + goto error_add; +error_add: + return result; +} + + +/* + * Initialize the barker database + * + * This can only be used from the module_init function for this + * module; this is to avoid the need to do locking. + * + * @options: command line argument with extra barkers to + * recognize. This is a comma-separated list of 32-bit hex + * numbers. They are appended to the existing list. Setting 0 + * cleans the existing list and starts a new one. + */ +int i2400m_barker_db_init(const char *_options) +{ + int result; + char *options = NULL, *options_orig, *token; + + i2400m_barker_db = NULL; + i2400m_barker_db_size = 0; + i2400m_barker_db_used = 0; + + result = i2400m_barker_db_known_barkers(); + if (result < 0) + goto error_add; + /* parse command line options from i2400m.barkers */ + if (_options != NULL) { + unsigned barker; + + options_orig = kstrdup(_options, GFP_KERNEL); + if (options_orig == NULL) + goto error_parse; + options = options_orig; + + while ((token = strsep(&options, ",")) != NULL) { + if (*token == '\0') /* eat joint commas */ + continue; + if (sscanf(token, "%x", &barker) != 1 + || barker > 0xffffffff) { + printk(KERN_ERR "%s: can't recognize " + "i2400m.barkers value '%s' as " + "a 32-bit number\n", + __func__, token); + result = -EINVAL; + goto error_parse; + } + if (barker == 0) { + /* clean list and start new */ + i2400m_barker_db_exit(); + continue; + } + result = i2400m_barker_db_add(barker); + if (result < 0) + goto error_add; + } + kfree(options_orig); + } + return 0; + +error_parse: +error_add: + kfree(i2400m_barker_db); + return result; +} + + +/* + * Recognize a boot barker + * + * @buf: buffer where the boot barker. + * @buf_size: size of the buffer (has to be 16 bytes). It is passed + * here so the function can check it for the caller. + * + * Note that as a side effect, upon identifying the obtained boot + * barker, this function will set i2400m->barker to point to the right + * barker database entry. Subsequent calls to the function will result + * in verifying that the same type of boot barker is returned when the + * device [re]boots (as long as the same device instance is used). + * + * Return: 0 if @buf matches a known boot barker. -ENOENT if the + * buffer in @buf doesn't match any boot barker in the database or + * -EILSEQ if the buffer doesn't have the right size. + */ +int i2400m_is_boot_barker(struct i2400m *i2400m, + const void *buf, size_t buf_size) +{ + int result; + struct device *dev = i2400m_dev(i2400m); + struct i2400m_barker_db *barker; + int i; + + result = -ENOENT; + if (buf_size != sizeof(i2400m_barker_db[i].data)) + return result; + + /* Short circuit if we have already discovered the barker + * associated with the device. */ + if (i2400m->barker + && !memcmp(buf, i2400m->barker, sizeof(i2400m->barker->data))) { + unsigned index = (i2400m->barker - i2400m_barker_db) + / sizeof(*i2400m->barker); + d_printf(2, dev, "boot barker cache-confirmed #%u/%08x\n", + index, le32_to_cpu(i2400m->barker->data[0])); + return 0; + } + + for (i = 0; i < i2400m_barker_db_used; i++) { + barker = &i2400m_barker_db[i]; + BUILD_BUG_ON(sizeof(barker->data) != 16); + if (memcmp(buf, barker->data, sizeof(barker->data))) + continue; + + if (i2400m->barker == NULL) { + i2400m->barker = barker; + d_printf(1, dev, "boot barker set to #%u/%08x\n", + i, le32_to_cpu(barker->data[0])); + if (barker->data[0] == le32_to_cpu(I2400M_NBOOT_BARKER)) + i2400m->sboot = 0; + else + i2400m->sboot = 1; + } else if (i2400m->barker != barker) { + dev_err(dev, "HW inconsistency: device " + "reports a different boot barker " + "than set (from %08x to %08x)\n", + le32_to_cpu(i2400m->barker->data[0]), + le32_to_cpu(barker->data[0])); + result = -EIO; + } else + d_printf(2, dev, "boot barker confirmed #%u/%08x\n", + i, le32_to_cpu(barker->data[0])); + result = 0; + break; + } + return result; +} +EXPORT_SYMBOL_GPL(i2400m_is_boot_barker); + + +/* * Verify the ack data received * * Given a reply to a boot mode command, chew it and verify everything @@ -204,20 +463,10 @@ ssize_t __i2400m_bm_ack_verify(struct i2400m *i2400m, int opcode, opcode, ack_size, sizeof(*ack)); goto error_ack_short; } - if (ack_size == sizeof(i2400m_NBOOT_BARKER) - && memcmp(ack, i2400m_NBOOT_BARKER, sizeof(*ack)) == 0) { + result = i2400m_is_boot_barker(i2400m, ack, ack_size); + if (result >= 0) { result = -ERESTARTSYS; - i2400m->sboot = 0; - d_printf(6, dev, "boot-mode cmd %d: " - "HW non-signed boot barker\n", opcode); - goto error_reboot; - } - if (ack_size == sizeof(i2400m_SBOOT_BARKER) - && memcmp(ack, i2400m_SBOOT_BARKER, sizeof(*ack)) == 0) { - result = -ERESTARTSYS; - i2400m->sboot = 1; - d_printf(6, dev, "boot-mode cmd %d: HW signed reboot barker\n", - opcode); + d_printf(6, dev, "boot-mode cmd %d: HW boot barker\n", opcode); goto error_reboot; } if (ack_size == sizeof(i2400m_ACK_BARKER) @@ -343,7 +592,6 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m, BUG_ON(i2400m->boot_mode == 0); if (cmd != NULL) { /* send the command */ - memcpy(i2400m->bm_cmd_buf, cmd, cmd_size); result = i2400m->bus_bm_cmd_send(i2400m, cmd, cmd_size, flags); if (result < 0) goto error_cmd_send; @@ -432,8 +680,8 @@ static int i2400m_download_chunk(struct i2400m *i2400m, const void *chunk, * Download a BCF file's sections to the device * * @i2400m: device descriptor - * @bcf: pointer to firmware data (followed by the payloads). Assumed - * verified and consistent. + * @bcf: pointer to firmware data (first header followed by the + * payloads). Assumed verified and consistent. * @bcf_len: length (in bytes) of the @bcf buffer. * * Returns: < 0 errno code on error or the offset to the jump instruction. @@ -472,14 +720,17 @@ ssize_t i2400m_dnload_bcf(struct i2400m *i2400m, "downloading section #%zu (@%zu %zu B) to 0x%08x\n", section, offset, sizeof(*bh) + data_size, le32_to_cpu(bh->target_addr)); - if (i2400m_brh_get_opcode(bh) == I2400M_BRH_SIGNED_JUMP) { - /* Secure boot needs to stop here */ - d_printf(5, dev, "signed jump found @%zu\n", offset); + /* + * We look for JUMP cmd from the bootmode header, + * either I2400M_BRH_SIGNED_JUMP for secure boot + * or I2400M_BRH_JUMP for unsecure boot, the last chunk + * should be the bootmode header with JUMP cmd. + */ + if (i2400m_brh_get_opcode(bh) == I2400M_BRH_SIGNED_JUMP || + i2400m_brh_get_opcode(bh) == I2400M_BRH_JUMP) { + d_printf(5, dev, "jump found @%zu\n", offset); break; } - if (offset + section_size == bcf_len) - /* Non-secure boot stops here */ - break; if (offset + section_size > bcf_len) { dev_err(dev, "fw %s: bad section #%zu, " "end (@%zu) beyond EOF (@%zu)\n", @@ -510,13 +761,30 @@ error_send: /* + * Indicate if the device emitted a reboot barker that indicates + * "signed boot" + */ +static +unsigned i2400m_boot_is_signed(struct i2400m *i2400m) +{ + return likely(i2400m->sboot); +} + + +/* * Do the final steps of uploading firmware * + * @bcf_hdr: BCF header we are actually using + * @bcf: pointer to the firmware image (which matches the first header + * that is followed by the actual payloads). + * @offset: [byte] offset into @bcf for the command we need to send. + * * Depending on the boot mode (signed vs non-signed), different * actions need to be taken. */ static int i2400m_dnload_finalize(struct i2400m *i2400m, + const struct i2400m_bcf_hdr *bcf_hdr, const struct i2400m_bcf_hdr *bcf, size_t offset) { int ret = 0; @@ -530,10 +798,14 @@ int i2400m_dnload_finalize(struct i2400m *i2400m, d_fnstart(3, dev, "offset %zu\n", offset); cmd = (void *) bcf + offset; - if (i2400m->sboot == 0) { + if (i2400m_boot_is_signed(i2400m) == 0) { struct i2400m_bootrom_header jump_ack; d_printf(1, dev, "unsecure boot, jumping to 0x%08x\n", le32_to_cpu(cmd->target_addr)); + cmd_buf = i2400m->bm_cmd_buf; + memcpy(&cmd_buf->cmd, cmd, sizeof(*cmd)); + cmd = &cmd_buf->cmd; + /* now cmd points to the actual bootrom_header in cmd_buf */ i2400m_brh_set_opcode(cmd, I2400M_BRH_JUMP); cmd->data_size = 0; ret = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd), @@ -544,12 +816,13 @@ int i2400m_dnload_finalize(struct i2400m *i2400m, cmd_buf = i2400m->bm_cmd_buf; memcpy(&cmd_buf->cmd, cmd, sizeof(*cmd)); signature_block_offset = - sizeof(*bcf) - + le32_to_cpu(bcf->key_size) * sizeof(u32) - + le32_to_cpu(bcf->exponent_size) * sizeof(u32); + sizeof(*bcf_hdr) + + le32_to_cpu(bcf_hdr->key_size) * sizeof(u32) + + le32_to_cpu(bcf_hdr->exponent_size) * sizeof(u32); signature_block_size = - le32_to_cpu(bcf->modulus_size) * sizeof(u32); - memcpy(cmd_buf->cmd_pl, (void *) bcf + signature_block_offset, + le32_to_cpu(bcf_hdr->modulus_size) * sizeof(u32); + memcpy(cmd_buf->cmd_pl, + (void *) bcf_hdr + signature_block_offset, signature_block_size); ret = i2400m_bm_cmd(i2400m, &cmd_buf->cmd, sizeof(cmd_buf->cmd) + signature_block_size, @@ -565,7 +838,7 @@ int i2400m_dnload_finalize(struct i2400m *i2400m, * * @i2400m: device descriptor * @flags: - * I2400M_BRI_SOFT: a reboot notification has been seen + * I2400M_BRI_SOFT: a reboot barker has been seen * already, so don't wait for it. * * I2400M_BRI_NO_REBOOT: Don't send a reboot command, but wait @@ -576,17 +849,15 @@ int i2400m_dnload_finalize(struct i2400m *i2400m, * * < 0 errno code on error, 0 if ok. * - * i2400m->sboot set to 0 for unsecure boot process, 1 for secure - * boot process. - * * Description: * * Tries hard enough to put the device in boot-mode. There are two * main phases to this: * * a. (1) send a reboot command and (2) get a reboot barker - * b. (1) ack the reboot sending a reboot barker and (2) getting an - * ack barker in return + * + * b. (1) echo/ack the reboot sending the reboot barker back and (2) + * getting an ack barker in return * * We want to skip (a) in some cases [soft]. The state machine is * horrible, but it is basically: on each phase, send what has to be @@ -594,6 +865,16 @@ int i2400m_dnload_finalize(struct i2400m *i2400m, * have to backtrack and retry, so we keep a max tries counter for * that. * + * It sucks because we don't know ahead of time which is going to be + * the reboot barker (the device might send different ones depending + * on its EEPROM config) and once the device reboots and waits for the + * echo/ack reboot barker being sent back, it doesn't understand + * anything else. So we can be left at the point where we don't know + * what to send to it -- cold reset and bus reset seem to have little + * effect. So the function iterates (in this case) through all the + * known barkers and tries them all until an ACK is + * received. Otherwise, it gives up. + * * If we get a timeout after sending a warm reset, we do it again. */ int i2400m_bootrom_init(struct i2400m *i2400m, enum i2400m_bri flags) @@ -602,10 +883,11 @@ int i2400m_bootrom_init(struct i2400m *i2400m, enum i2400m_bri flags) struct device *dev = i2400m_dev(i2400m); struct i2400m_bootrom_header *cmd; struct i2400m_bootrom_header ack; - int count = I2400M_BOOT_RETRIES; + int count = i2400m->bus_bm_retries; int ack_timeout_cnt = 1; + unsigned i; - BUILD_BUG_ON(sizeof(*cmd) != sizeof(i2400m_NBOOT_BARKER)); + BUILD_BUG_ON(sizeof(*cmd) != sizeof(i2400m_barker_db[0].data)); BUILD_BUG_ON(sizeof(ack) != sizeof(i2400m_ACK_BARKER)); d_fnstart(4, dev, "(i2400m %p flags 0x%08x)\n", i2400m, flags); @@ -614,27 +896,59 @@ int i2400m_bootrom_init(struct i2400m *i2400m, enum i2400m_bri flags) if (flags & I2400M_BRI_SOFT) goto do_reboot_ack; do_reboot: + ack_timeout_cnt = 1; if (--count < 0) goto error_timeout; d_printf(4, dev, "device reboot: reboot command [%d # left]\n", count); if ((flags & I2400M_BRI_NO_REBOOT) == 0) - i2400m->bus_reset(i2400m, I2400M_RT_WARM); + i2400m_reset(i2400m, I2400M_RT_WARM); result = i2400m_bm_cmd(i2400m, NULL, 0, &ack, sizeof(ack), I2400M_BM_CMD_RAW); flags &= ~I2400M_BRI_NO_REBOOT; switch (result) { case -ERESTARTSYS: + /* + * at this point, i2400m_bm_cmd(), through + * __i2400m_bm_ack_process(), has updated + * i2400m->barker and we are good to go. + */ d_printf(4, dev, "device reboot: got reboot barker\n"); break; case -EISCONN: /* we don't know how it got here...but we follow it */ d_printf(4, dev, "device reboot: got ack barker - whatever\n"); goto do_reboot; - case -ETIMEDOUT: /* device has timed out, we might be in boot - * mode already and expecting an ack, let's try - * that */ - dev_info(dev, "warm reset timed out, trying an ack\n"); - goto do_reboot_ack; + case -ETIMEDOUT: + /* + * Device has timed out, we might be in boot mode + * already and expecting an ack; if we don't know what + * the barker is, we just send them all. Cold reset + * and bus reset don't work. Beats me. + */ + if (i2400m->barker != NULL) { + dev_err(dev, "device boot: reboot barker timed out, " + "trying (set) %08x echo/ack\n", + le32_to_cpu(i2400m->barker->data[0])); + goto do_reboot_ack; + } + for (i = 0; i < i2400m_barker_db_used; i++) { + struct i2400m_barker_db *barker = &i2400m_barker_db[i]; + memcpy(cmd, barker->data, sizeof(barker->data)); + result = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd), + &ack, sizeof(ack), + I2400M_BM_CMD_RAW); + if (result == -EISCONN) { + dev_warn(dev, "device boot: got ack barker " + "after sending echo/ack barker " + "#%d/%08x; rebooting j.i.c.\n", + i, le32_to_cpu(barker->data[0])); + flags &= ~I2400M_BRI_NO_REBOOT; + goto do_reboot; + } + } + dev_err(dev, "device boot: tried all the echo/acks, could " + "not get device to respond; giving up"); + result = -ESHUTDOWN; case -EPROTO: case -ESHUTDOWN: /* dev is gone */ case -EINTR: /* user cancelled */ @@ -642,6 +956,7 @@ do_reboot: default: dev_err(dev, "device reboot: error %d while waiting " "for reboot barker - rebooting\n", result); + d_dump(1, dev, &ack, result); goto do_reboot; } /* At this point we ack back with 4 REBOOT barkers and expect @@ -650,12 +965,7 @@ do_reboot: * notification and report it as -EISCONN. */ do_reboot_ack: d_printf(4, dev, "device reboot ack: sending ack [%d # left]\n", count); - if (i2400m->sboot == 0) - memcpy(cmd, i2400m_NBOOT_BARKER, - sizeof(i2400m_NBOOT_BARKER)); - else - memcpy(cmd, i2400m_SBOOT_BARKER, - sizeof(i2400m_SBOOT_BARKER)); + memcpy(cmd, i2400m->barker->data, sizeof(i2400m->barker->data)); result = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd), &ack, sizeof(ack), I2400M_BM_CMD_RAW); switch (result) { @@ -668,10 +978,8 @@ do_reboot_ack: d_printf(4, dev, "reboot ack: got ack barker - good\n"); break; case -ETIMEDOUT: /* no response, maybe it is the other type? */ - if (ack_timeout_cnt-- >= 0) { - d_printf(4, dev, "reboot ack timedout: " - "trying the other type?\n"); - i2400m->sboot = !i2400m->sboot; + if (ack_timeout_cnt-- < 0) { + d_printf(4, dev, "reboot ack timedout: retrying\n"); goto do_reboot_ack; } else { dev_err(dev, "reboot ack timedout too long: " @@ -839,32 +1147,29 @@ int i2400m_dnload_init_signed(struct i2400m *i2400m, * (signed or non-signed). */ static -int i2400m_dnload_init(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf) +int i2400m_dnload_init(struct i2400m *i2400m, + const struct i2400m_bcf_hdr *bcf_hdr) { int result; struct device *dev = i2400m_dev(i2400m); - u32 module_id = le32_to_cpu(bcf->module_id); - if (i2400m->sboot == 0 - && (module_id & I2400M_BCF_MOD_ID_POKES) == 0) { - /* non-signed boot process without pokes */ - result = i2400m_dnload_init_nonsigned(i2400m); + if (i2400m_boot_is_signed(i2400m)) { + d_printf(1, dev, "signed boot\n"); + result = i2400m_dnload_init_signed(i2400m, bcf_hdr); if (result == -ERESTARTSYS) return result; if (result < 0) - dev_err(dev, "fw %s: non-signed download " + dev_err(dev, "firmware %s: signed boot download " "initialization failed: %d\n", i2400m->fw_name, result); - } else if (i2400m->sboot == 0 - && (module_id & I2400M_BCF_MOD_ID_POKES)) { - /* non-signed boot process with pokes, nothing to do */ - result = 0; - } else { /* signed boot process */ - result = i2400m_dnload_init_signed(i2400m, bcf); + } else { + /* non-signed boot process without pokes */ + d_printf(1, dev, "non-signed boot\n"); + result = i2400m_dnload_init_nonsigned(i2400m); if (result == -ERESTARTSYS) return result; if (result < 0) - dev_err(dev, "fw %s: signed boot download " + dev_err(dev, "firmware %s: non-signed download " "initialization failed: %d\n", i2400m->fw_name, result); } @@ -873,74 +1178,201 @@ int i2400m_dnload_init(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf) /* - * Run quick consistency tests on the firmware file + * Run consistency tests on the firmware file and load up headers * * Check for the firmware being made for the i2400m device, * etc...These checks are mostly informative, as the device will make * them too; but the driver's response is more informative on what * went wrong. + * + * This will also look at all the headers present on the firmware + * file, and update i2400m->fw_bcf_hdr to point to them. */ static -int i2400m_fw_check(struct i2400m *i2400m, - const struct i2400m_bcf_hdr *bcf, - size_t bcf_size) +int i2400m_fw_hdr_check(struct i2400m *i2400m, + const struct i2400m_bcf_hdr *bcf_hdr, + size_t index, size_t offset) { - int result; struct device *dev = i2400m_dev(i2400m); + unsigned module_type, header_len, major_version, minor_version, module_id, module_vendor, date, size; - /* Check hard errors */ - result = -EINVAL; - if (bcf_size < sizeof(*bcf)) { /* big enough header? */ - dev_err(dev, "firmware %s too short: " - "%zu B vs %zu (at least) expected\n", - i2400m->fw_name, bcf_size, sizeof(*bcf)); - goto error; - } + module_type = bcf_hdr->module_type; + header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len); + major_version = (le32_to_cpu(bcf_hdr->header_version) & 0xffff0000) + >> 16; + minor_version = le32_to_cpu(bcf_hdr->header_version) & 0x0000ffff; + module_id = le32_to_cpu(bcf_hdr->module_id); + module_vendor = le32_to_cpu(bcf_hdr->module_vendor); + date = le32_to_cpu(bcf_hdr->date); + size = sizeof(u32) * le32_to_cpu(bcf_hdr->size); - module_type = bcf->module_type; - header_len = sizeof(u32) * le32_to_cpu(bcf->header_len); - major_version = le32_to_cpu(bcf->header_version) & 0xffff0000 >> 16; - minor_version = le32_to_cpu(bcf->header_version) & 0x0000ffff; - module_id = le32_to_cpu(bcf->module_id); - module_vendor = le32_to_cpu(bcf->module_vendor); - date = le32_to_cpu(bcf->date); - size = sizeof(u32) * le32_to_cpu(bcf->size); - - if (bcf_size != size) { /* annoyingly paranoid */ - dev_err(dev, "firmware %s: bad size, got " - "%zu B vs %u expected\n", - i2400m->fw_name, bcf_size, size); - goto error; - } + d_printf(1, dev, "firmware %s #%zd@%08zx: BCF header " + "type:vendor:id 0x%x:%x:%x v%u.%u (%u/%u B) built %08x\n", + i2400m->fw_name, index, offset, + module_type, module_vendor, module_id, + major_version, minor_version, header_len, size, date); - d_printf(2, dev, "type 0x%x id 0x%x vendor 0x%x; header v%u.%u (%zu B) " - "date %08x (%zu B)\n", - module_type, module_id, module_vendor, - major_version, minor_version, (size_t) header_len, - date, (size_t) size); + /* Hard errors */ + if (major_version != 1) { + dev_err(dev, "firmware %s #%zd@%08zx: major header version " + "v%u.%u not supported\n", + i2400m->fw_name, index, offset, + major_version, minor_version); + return -EBADF; + } if (module_type != 6) { /* built for the right hardware? */ - dev_err(dev, "bad fw %s: unexpected module type 0x%x; " - "aborting\n", i2400m->fw_name, module_type); - goto error; + dev_err(dev, "firmware %s #%zd@%08zx: unexpected module " + "type 0x%x; aborting\n", + i2400m->fw_name, index, offset, + module_type); + return -EBADF; + } + + if (module_vendor != 0x8086) { + dev_err(dev, "firmware %s #%zd@%08zx: unexpected module " + "vendor 0x%x; aborting\n", + i2400m->fw_name, index, offset, module_vendor); + return -EBADF; } - /* Check soft-er errors */ - result = 0; - if (module_vendor != 0x8086) - dev_err(dev, "bad fw %s? unexpected vendor 0x%04x\n", - i2400m->fw_name, module_vendor); if (date < 0x20080300) - dev_err(dev, "bad fw %s? build date too old %08x\n", - i2400m->fw_name, date); -error: + dev_warn(dev, "firmware %s #%zd@%08zx: build date %08x " + "too old; unsupported\n", + i2400m->fw_name, index, offset, date); + return 0; +} + + +/* + * Run consistency tests on the firmware file and load up headers + * + * Check for the firmware being made for the i2400m device, + * etc...These checks are mostly informative, as the device will make + * them too; but the driver's response is more informative on what + * went wrong. + * + * This will also look at all the headers present on the firmware + * file, and update i2400m->fw_hdrs to point to them. + */ +static +int i2400m_fw_check(struct i2400m *i2400m, const void *bcf, size_t bcf_size) +{ + int result; + struct device *dev = i2400m_dev(i2400m); + size_t headers = 0; + const struct i2400m_bcf_hdr *bcf_hdr; + const void *itr, *next, *top; + size_t slots = 0, used_slots = 0; + + for (itr = bcf, top = itr + bcf_size; + itr < top; + headers++, itr = next) { + size_t leftover, offset, header_len, size; + + leftover = top - itr; + offset = itr - (const void *) bcf; + if (leftover <= sizeof(*bcf_hdr)) { + dev_err(dev, "firmware %s: %zu B left at @%zx, " + "not enough for BCF header\n", + i2400m->fw_name, leftover, offset); + break; + } + bcf_hdr = itr; + /* Only the first header is supposed to be followed by + * payload */ + header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len); + size = sizeof(u32) * le32_to_cpu(bcf_hdr->size); + if (headers == 0) + next = itr + size; + else + next = itr + header_len; + + result = i2400m_fw_hdr_check(i2400m, bcf_hdr, headers, offset); + if (result < 0) + continue; + if (used_slots + 1 >= slots) { + /* +1 -> we need to account for the one we'll + * occupy and at least an extra one for + * always being NULL */ + result = i2400m_zrealloc_2x( + (void **) &i2400m->fw_hdrs, &slots, + sizeof(i2400m->fw_hdrs[0]), + GFP_KERNEL); + if (result < 0) + goto error_zrealloc; + } + i2400m->fw_hdrs[used_slots] = bcf_hdr; + used_slots++; + } + if (headers == 0) { + dev_err(dev, "firmware %s: no usable headers found\n", + i2400m->fw_name); + result = -EBADF; + } else + result = 0; +error_zrealloc: return result; } /* + * Match a barker to a BCF header module ID + * + * The device sends a barker which tells the firmware loader which + * header in the BCF file has to be used. This does the matching. + */ +static +unsigned i2400m_bcf_hdr_match(struct i2400m *i2400m, + const struct i2400m_bcf_hdr *bcf_hdr) +{ + u32 barker = le32_to_cpu(i2400m->barker->data[0]) + & 0x7fffffff; + u32 module_id = le32_to_cpu(bcf_hdr->module_id) + & 0x7fffffff; /* high bit used for something else */ + + /* special case for 5x50 */ + if (barker == I2400M_SBOOT_BARKER && module_id == 0) + return 1; + if (module_id == barker) + return 1; + return 0; +} + +static +const struct i2400m_bcf_hdr *i2400m_bcf_hdr_find(struct i2400m *i2400m) +{ + struct device *dev = i2400m_dev(i2400m); + const struct i2400m_bcf_hdr **bcf_itr, *bcf_hdr; + unsigned i = 0; + u32 barker = le32_to_cpu(i2400m->barker->data[0]); + + d_printf(2, dev, "finding BCF header for barker %08x\n", barker); + if (barker == I2400M_NBOOT_BARKER) { + bcf_hdr = i2400m->fw_hdrs[0]; + d_printf(1, dev, "using BCF header #%u/%08x for non-signed " + "barker\n", 0, le32_to_cpu(bcf_hdr->module_id)); + return bcf_hdr; + } + for (bcf_itr = i2400m->fw_hdrs; *bcf_itr != NULL; bcf_itr++, i++) { + bcf_hdr = *bcf_itr; + if (i2400m_bcf_hdr_match(i2400m, bcf_hdr)) { + d_printf(1, dev, "hit on BCF hdr #%u/%08x\n", + i, le32_to_cpu(bcf_hdr->module_id)); + return bcf_hdr; + } else + d_printf(1, dev, "miss on BCF hdr #%u/%08x\n", + i, le32_to_cpu(bcf_hdr->module_id)); + } + dev_err(dev, "cannot find a matching BCF header for barker %08x\n", + barker); + return NULL; +} + + +/* * Download the firmware to the device * * @i2400m: device descriptor @@ -956,14 +1388,16 @@ error: */ static int i2400m_fw_dnload(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf, - size_t bcf_size, enum i2400m_bri flags) + size_t fw_size, enum i2400m_bri flags) { int ret = 0; struct device *dev = i2400m_dev(i2400m); int count = i2400m->bus_bm_retries; + const struct i2400m_bcf_hdr *bcf_hdr; + size_t bcf_size; - d_fnstart(5, dev, "(i2400m %p bcf %p size %zu)\n", - i2400m, bcf, bcf_size); + d_fnstart(5, dev, "(i2400m %p bcf %p fw size %zu)\n", + i2400m, bcf, fw_size); i2400m->boot_mode = 1; wmb(); /* Make sure other readers see it */ hw_reboot: @@ -985,13 +1419,28 @@ hw_reboot: * Initialize the download, push the bytes to the device and * then jump to the new firmware. Note @ret is passed with the * offset of the jump instruction to _dnload_finalize() + * + * Note we need to use the BCF header in the firmware image + * that matches the barker that the device sent when it + * rebooted, so it has to be passed along. */ - ret = i2400m_dnload_init(i2400m, bcf); /* Init device's dnload */ + ret = -EBADF; + bcf_hdr = i2400m_bcf_hdr_find(i2400m); + if (bcf_hdr == NULL) + goto error_bcf_hdr_find; + + ret = i2400m_dnload_init(i2400m, bcf_hdr); if (ret == -ERESTARTSYS) goto error_dev_rebooted; if (ret < 0) goto error_dnload_init; + /* + * bcf_size refers to one header size plus the fw sections size + * indicated by the header,ie. if there are other extended headers + * at the tail, they are not counted + */ + bcf_size = sizeof(u32) * le32_to_cpu(bcf_hdr->size); ret = i2400m_dnload_bcf(i2400m, bcf, bcf_size); if (ret == -ERESTARTSYS) goto error_dev_rebooted; @@ -1001,7 +1450,7 @@ hw_reboot: goto error_dnload_bcf; } - ret = i2400m_dnload_finalize(i2400m, bcf, ret); + ret = i2400m_dnload_finalize(i2400m, bcf_hdr, bcf, ret); if (ret == -ERESTARTSYS) goto error_dev_rebooted; if (ret < 0) { @@ -1018,10 +1467,11 @@ hw_reboot: error_dnload_finalize: error_dnload_bcf: error_dnload_init: +error_bcf_hdr_find: error_bootrom_init: error_too_many_reboots: d_fnend(5, dev, "(i2400m %p bcf %p size %zu) = %d\n", - i2400m, bcf, bcf_size, ret); + i2400m, bcf, fw_size, ret); return ret; error_dev_rebooted: @@ -1031,6 +1481,61 @@ error_dev_rebooted: goto hw_reboot; } +static +int i2400m_fw_bootstrap(struct i2400m *i2400m, const struct firmware *fw, + enum i2400m_bri flags) +{ + int ret; + struct device *dev = i2400m_dev(i2400m); + const struct i2400m_bcf_hdr *bcf; /* Firmware data */ + + d_fnstart(5, dev, "(i2400m %p)\n", i2400m); + bcf = (void *) fw->data; + ret = i2400m_fw_check(i2400m, bcf, fw->size); + if (ret >= 0) + ret = i2400m_fw_dnload(i2400m, bcf, fw->size, flags); + if (ret < 0) + dev_err(dev, "%s: cannot use: %d, skipping\n", + i2400m->fw_name, ret); + kfree(i2400m->fw_hdrs); + i2400m->fw_hdrs = NULL; + d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret); + return ret; +} + + +/* Refcounted container for firmware data */ +struct i2400m_fw { + struct kref kref; + const struct firmware *fw; +}; + + +static +void i2400m_fw_destroy(struct kref *kref) +{ + struct i2400m_fw *i2400m_fw = + container_of(kref, struct i2400m_fw, kref); + release_firmware(i2400m_fw->fw); + kfree(i2400m_fw); +} + + +static +struct i2400m_fw *i2400m_fw_get(struct i2400m_fw *i2400m_fw) +{ + if (i2400m_fw != NULL && i2400m_fw != (void *) ~0) + kref_get(&i2400m_fw->kref); + return i2400m_fw; +} + + +static +void i2400m_fw_put(struct i2400m_fw *i2400m_fw) +{ + kref_put(&i2400m_fw->kref, i2400m_fw_destroy); +} + /** * i2400m_dev_bootstrap - Bring the device to a known state and upload firmware @@ -1049,42 +1554,109 @@ error_dev_rebooted: */ int i2400m_dev_bootstrap(struct i2400m *i2400m, enum i2400m_bri flags) { - int ret = 0, itr = 0; + int ret, itr; struct device *dev = i2400m_dev(i2400m); - const struct firmware *fw; + struct i2400m_fw *i2400m_fw; const struct i2400m_bcf_hdr *bcf; /* Firmware data */ + const struct firmware *fw; const char *fw_name; d_fnstart(5, dev, "(i2400m %p)\n", i2400m); + ret = -ENODEV; + spin_lock(&i2400m->rx_lock); + i2400m_fw = i2400m_fw_get(i2400m->fw_cached); + spin_unlock(&i2400m->rx_lock); + if (i2400m_fw == (void *) ~0) { + dev_err(dev, "can't load firmware now!"); + goto out; + } else if (i2400m_fw != NULL) { + dev_info(dev, "firmware %s: loading from cache\n", + i2400m->fw_name); + ret = i2400m_fw_bootstrap(i2400m, i2400m_fw->fw, flags); + i2400m_fw_put(i2400m_fw); + goto out; + } + /* Load firmware files to memory. */ - itr = 0; - while(1) { + for (itr = 0, bcf = NULL, ret = -ENOENT; ; itr++) { fw_name = i2400m->bus_fw_names[itr]; if (fw_name == NULL) { dev_err(dev, "Could not find a usable firmware image\n"); - ret = -ENOENT; - goto error_no_fw; + break; } + d_printf(1, dev, "trying firmware %s (%d)\n", fw_name, itr); ret = request_firmware(&fw, fw_name, dev); - if (ret == 0) - break; /* got it */ - if (ret < 0) + if (ret < 0) { dev_err(dev, "fw %s: cannot load file: %d\n", fw_name, ret); - itr++; + continue; + } + i2400m->fw_name = fw_name; + ret = i2400m_fw_bootstrap(i2400m, fw, flags); + release_firmware(fw); + if (ret >= 0) /* firmware loaded succesfully */ + break; + i2400m->fw_name = NULL; } - - bcf = (void *) fw->data; - i2400m->fw_name = fw_name; - ret = i2400m_fw_check(i2400m, bcf, fw->size); - if (ret < 0) - goto error_fw_bad; - ret = i2400m_fw_dnload(i2400m, bcf, fw->size, flags); -error_fw_bad: - release_firmware(fw); -error_no_fw: +out: d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret); return ret; } EXPORT_SYMBOL_GPL(i2400m_dev_bootstrap); + + +void i2400m_fw_cache(struct i2400m *i2400m) +{ + int result; + struct i2400m_fw *i2400m_fw; + struct device *dev = i2400m_dev(i2400m); + + /* if there is anything there, free it -- now, this'd be weird */ + spin_lock(&i2400m->rx_lock); + i2400m_fw = i2400m->fw_cached; + spin_unlock(&i2400m->rx_lock); + if (i2400m_fw != NULL && i2400m_fw != (void *) ~0) { + i2400m_fw_put(i2400m_fw); + WARN(1, "%s:%u: still cached fw still present?\n", + __func__, __LINE__); + } + + if (i2400m->fw_name == NULL) { + dev_err(dev, "firmware n/a: can't cache\n"); + i2400m_fw = (void *) ~0; + goto out; + } + + i2400m_fw = kzalloc(sizeof(*i2400m_fw), GFP_ATOMIC); + if (i2400m_fw == NULL) + goto out; + kref_init(&i2400m_fw->kref); + result = request_firmware(&i2400m_fw->fw, i2400m->fw_name, dev); + if (result < 0) { + dev_err(dev, "firmware %s: failed to cache: %d\n", + i2400m->fw_name, result); + kfree(i2400m_fw); + i2400m_fw = (void *) ~0; + } else + dev_info(dev, "firmware %s: cached\n", i2400m->fw_name); +out: + spin_lock(&i2400m->rx_lock); + i2400m->fw_cached = i2400m_fw; + spin_unlock(&i2400m->rx_lock); +} + + +void i2400m_fw_uncache(struct i2400m *i2400m) +{ + struct i2400m_fw *i2400m_fw; + + spin_lock(&i2400m->rx_lock); + i2400m_fw = i2400m->fw_cached; + i2400m->fw_cached = NULL; + spin_unlock(&i2400m->rx_lock); + + if (i2400m_fw != NULL && i2400m_fw != (void *) ~0) + i2400m_fw_put(i2400m_fw); +} + |