diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/wan/sdlamain.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/wan/sdlamain.c')
-rw-r--r-- | drivers/net/wan/sdlamain.c | 1341 |
1 files changed, 1341 insertions, 0 deletions
diff --git a/drivers/net/wan/sdlamain.c b/drivers/net/wan/sdlamain.c new file mode 100644 index 0000000..74e151a --- /dev/null +++ b/drivers/net/wan/sdlamain.c @@ -0,0 +1,1341 @@ +/**************************************************************************** +* sdlamain.c WANPIPE(tm) Multiprotocol WAN Link Driver. Main module. +* +* Author: Nenad Corbic <ncorbic@sangoma.com> +* Gideon Hack +* +* Copyright: (c) 1995-2000 Sangoma Technologies Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +* ============================================================================ +* Dec 22, 2000 Nenad Corbic Updated for 2.4.X kernels. +* Removed the polling routine. +* Nov 13, 2000 Nenad Corbic Added hw probing on module load and dynamic +* device allocation. +* Nov 7, 2000 Nenad Corbic Fixed the Multi-Port PPP for kernels +* 2.2.16 and above. +* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on +* kernels 2.2.16 or greater. The SyncPPP +* has changed. +* Jul 25, 2000 Nenad Corbic Updated the Piggiback support for MultPPPP. +* Jul 13, 2000 Nenad Corbic Added Multi-PPP support. +* Feb 02, 2000 Nenad Corbic Fixed up piggyback probing and selection. +* Sep 23, 1999 Nenad Corbic Added support for SMP +* Sep 13, 1999 Nenad Corbic Each port is treated as a separate device. +* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. +* Updates for Linux 2.2.X kernels. +* Sep 17, 1998 Jaspreet Singh Updated for 2.1.121+ kernel +* Nov 28, 1997 Jaspreet Singh Changed DRV_RELEASE to 1 +* Nov 10, 1997 Jaspreet Singh Changed sti() to restore_flags(); +* Nov 06, 1997 Jaspreet Singh Changed DRV_VERSION to 4 and DRV_RELEASE to 0 +* Oct 20, 1997 Jaspreet Singh Modified sdla_isr routine so that card->in_isr +* assignments are taken out and placed in the +* sdla_ppp.c, sdla_fr.c and sdla_x25.c isr +* routines. Took out 'wandev->tx_int_enabled' and +* replaced it with 'wandev->enable_tx_int'. +* May 29, 1997 Jaspreet Singh Flow Control Problem +* added "wandev->tx_int_enabled=1" line in the +* init module. This line initializes the flag for +* preventing Interrupt disabled with device set to +* busy +* Jan 15, 1997 Gene Kozin Version 3.1.0 +* o added UDP management stuff +* Jan 02, 1997 Gene Kozin Initial version. +*****************************************************************************/ + +#include <linux/config.h> /* OS configuration options */ +#include <linux/stddef.h> /* offsetof(), etc. */ +#include <linux/errno.h> /* return codes */ +#include <linux/string.h> /* inline memset(), etc. */ +#include <linux/init.h> +#include <linux/slab.h> /* kmalloc(), kfree() */ +#include <linux/kernel.h> /* printk(), and other useful stuff */ +#include <linux/module.h> /* support for loadable modules */ +#include <linux/ioport.h> /* request_region(), release_region() */ +#include <linux/wanrouter.h> /* WAN router definitions */ +#include <linux/wanpipe.h> /* WANPIPE common user API definitions */ + +#include <linux/in.h> +#include <asm/io.h> /* phys_to_virt() */ +#include <linux/pci.h> +#include <linux/sdlapci.h> +#include <linux/if_wanpipe_common.h> + +#include <asm/uaccess.h> /* kernel <-> user copy */ +#include <linux/inetdevice.h> + +#include <linux/ip.h> +#include <net/route.h> + +#define KMEM_SAFETYZONE 8 + + +#ifndef CONFIG_WANPIPE_FR + #define wpf_init(a,b) (-EPROTONOSUPPORT) +#endif + +#ifndef CONFIG_WANPIPE_CHDLC + #define wpc_init(a,b) (-EPROTONOSUPPORT) +#endif + +#ifndef CONFIG_WANPIPE_X25 + #define wpx_init(a,b) (-EPROTONOSUPPORT) +#endif + +#ifndef CONFIG_WANPIPE_PPP + #define wpp_init(a,b) (-EPROTONOSUPPORT) +#endif + +#ifndef CONFIG_WANPIPE_MULTPPP + #define wsppp_init(a,b) (-EPROTONOSUPPORT) +#endif + + +/***********FOR DEBUGGING PURPOSES********************************************* +static void * dbg_kmalloc(unsigned int size, int prio, int line) { + int i = 0; + void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio); + char * c1 = v; + c1 += sizeof(unsigned int); + *((unsigned int *)v) = size; + + for (i = 0; i < KMEM_SAFETYZONE; i++) { + c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D'; + c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F'; + c1 += 8; + } + c1 += size; + for (i = 0; i < KMEM_SAFETYZONE; i++) { + c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G'; + c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L'; + c1 += 8; + } + v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8; + printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v); + return v; +} +static void dbg_kfree(void * v, int line) { + unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8)); + unsigned int size = *sp; + char * c1 = ((char *)v) - KMEM_SAFETYZONE*8; + int i = 0; + for (i = 0; i < KMEM_SAFETYZONE; i++) { + if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D' + || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') { + printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v); + printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, + c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); + } + c1 += 8; + } + c1 += size; + for (i = 0; i < KMEM_SAFETYZONE; i++) { + if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G' + || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L' + ) { + printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v); + printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, + c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); + } + c1 += 8; + } + printk(KERN_INFO "line %d kfree(%p)\n",line,v); + v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8); + kfree(v); +} + +#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__) +#define kfree(x) dbg_kfree(x,__LINE__) +******************************************************************************/ + + + +/****** Defines & Macros ****************************************************/ + +#ifdef _DEBUG_ +#define STATIC +#else +#define STATIC static +#endif + +#define DRV_VERSION 5 /* version number */ +#define DRV_RELEASE 0 /* release (minor version) number */ +#define MAX_CARDS 16 /* max number of adapters */ + +#ifndef CONFIG_WANPIPE_CARDS /* configurable option */ +#define CONFIG_WANPIPE_CARDS 1 +#endif + +#define CMD_OK 0 /* normal firmware return code */ +#define CMD_TIMEOUT 0xFF /* firmware command timed out */ +#define MAX_CMD_RETRY 10 /* max number of firmware retries */ +/****** Function Prototypes *************************************************/ + +extern void disable_irq(unsigned int); +extern void enable_irq(unsigned int); + +/* WAN link driver entry points */ +static int setup(struct wan_device* wandev, wandev_conf_t* conf); +static int shutdown(struct wan_device* wandev); +static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg); + +/* IOCTL handlers */ +static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump); +static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int); + +/* Miscellaneous functions */ +STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs); +static void release_hw (sdla_t *card); + +static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int*); +static int check_s514_conflicts (sdla_t* card,wandev_conf_t* conf, int*); + + +/****** Global Data ********************************************************** + * Note: All data must be explicitly initialized!!! + */ + +/* private data */ +static char drvname[] = "wanpipe"; +static char fullname[] = "WANPIPE(tm) Multiprotocol Driver"; +static char copyright[] = "(c) 1995-2000 Sangoma Technologies Inc."; +static int ncards; +static sdla_t* card_array; /* adapter data space */ + +/* Wanpipe's own workqueue, used for all API's. + * All protocol specific tasks will be inserted + * into the "wanpipe_wq" workqueue. + + * The kernel workqueue mechanism will execute + * all pending tasks in the "wanpipe_wq" workqueue. + */ + +struct workqueue_struct *wanpipe_wq; +DECLARE_WORK(wanpipe_work, NULL, NULL); + +static int wanpipe_bh_critical; + +/******* Kernel Loadable Module Entry Points ********************************/ + +/*============================================================================ + * Module 'insert' entry point. + * o print announcement + * o allocate adapter data space + * o initialize static data + * o register all cards with WAN router + * o calibrate SDLA shared memory access delay. + * + * Return: 0 Ok + * < 0 error. + * Context: process + */ + +static int __init wanpipe_init(void) +{ + int cnt, err = 0; + + printk(KERN_INFO "%s v%u.%u %s\n", + fullname, DRV_VERSION, DRV_RELEASE, copyright); + + wanpipe_wq = create_workqueue("wanpipe_wq"); + if (!wanpipe_wq) + return -ENOMEM; + + /* Probe for wanpipe cards and return the number found */ + printk(KERN_INFO "wanpipe: Probing for WANPIPE hardware.\n"); + ncards = wanpipe_hw_probe(); + if (ncards){ + printk(KERN_INFO "wanpipe: Allocating maximum %i devices: wanpipe%i - wanpipe%i.\n",ncards,1,ncards); + }else{ + printk(KERN_INFO "wanpipe: No S514/S508 cards found, unloading modules!\n"); + destroy_workqueue(wanpipe_wq); + return -ENODEV; + } + + /* Verify number of cards and allocate adapter data space */ + card_array = kmalloc(sizeof(sdla_t) * ncards, GFP_KERNEL); + if (card_array == NULL) { + destroy_workqueue(wanpipe_wq); + return -ENOMEM; + } + + memset(card_array, 0, sizeof(sdla_t) * ncards); + + /* Register adapters with WAN router */ + for (cnt = 0; cnt < ncards; ++ cnt) { + sdla_t* card = &card_array[cnt]; + struct wan_device* wandev = &card->wandev; + + card->next = NULL; + sprintf(card->devname, "%s%d", drvname, cnt + 1); + wandev->magic = ROUTER_MAGIC; + wandev->name = card->devname; + wandev->private = card; + wandev->enable_tx_int = 0; + wandev->setup = &setup; + wandev->shutdown = &shutdown; + wandev->ioctl = &ioctl; + err = register_wan_device(wandev); + if (err) { + printk(KERN_INFO + "%s: %s registration failed with error %d!\n", + drvname, card->devname, err); + break; + } + } + if (cnt){ + ncards = cnt; /* adjust actual number of cards */ + }else { + kfree(card_array); + destroy_workqueue(wanpipe_wq); + printk(KERN_INFO "IN Init Module: NO Cards registered\n"); + err = -ENODEV; + } + + return err; +} + +/*============================================================================ + * Module 'remove' entry point. + * o unregister all adapters from the WAN router + * o release all remaining system resources + */ +static void __exit wanpipe_cleanup(void) +{ + int i; + + if (!ncards) + return; + + for (i = 0; i < ncards; ++i) { + sdla_t* card = &card_array[i]; + unregister_wan_device(card->devname); + } + destroy_workqueue(wanpipe_wq); + kfree(card_array); + + printk(KERN_INFO "\nwanpipe: WANPIPE Modules Unloaded.\n"); +} + +module_init(wanpipe_init); +module_exit(wanpipe_cleanup); + +/******* WAN Device Driver Entry Points *************************************/ + +/*============================================================================ + * Setup/configure WAN link driver. + * o check adapter state + * o make sure firmware is present in configuration + * o make sure I/O port and IRQ are specified + * o make sure I/O region is available + * o allocate interrupt vector + * o setup SDLA hardware + * o call appropriate routine to perform protocol-specific initialization + * o mark I/O region as used + * o if this is the first active card, then schedule background task + * + * This function is called when router handles ROUTER_SETUP IOCTL. The + * configuration structure is in kernel memory (including extended data, if + * any). + */ + +static int setup(struct wan_device* wandev, wandev_conf_t* conf) +{ + sdla_t* card; + int err = 0; + int irq=0; + + /* Sanity checks */ + if ((wandev == NULL) || (wandev->private == NULL) || (conf == NULL)){ + printk(KERN_INFO + "%s: Failed Sdlamain Setup wandev %u, card %u, conf %u !\n", + wandev->name, + (unsigned int)wandev,(unsigned int)wandev->private, + (unsigned int)conf); + return -EFAULT; + } + + printk(KERN_INFO "%s: Starting WAN Setup\n", wandev->name); + + card = wandev->private; + if (wandev->state != WAN_UNCONFIGURED){ + printk(KERN_INFO "%s: failed sdlamain setup, busy!\n", + wandev->name); + return -EBUSY; /* already configured */ + } + + printk(KERN_INFO "\nProcessing WAN device %s...\n", wandev->name); + + /* Initialize the counters for each wandev + * Used for counting number of times new_if and + * del_if get called. + */ + wandev->del_if_cnt = 0; + wandev->new_if_cnt = 0; + wandev->config_id = conf->config_id; + + if (!conf->data_size || (conf->data == NULL)) { + printk(KERN_INFO + "%s: firmware not found in configuration data!\n", + wandev->name); + return -EINVAL; + } + + /* Check for resource conflicts and setup the + * card for piggibacking if necessary */ + if(!conf->S514_CPU_no[0]) { + if ((err=check_s508_conflicts(card,conf,&irq)) != 0){ + return err; + } + }else { + if ((err=check_s514_conflicts(card,conf,&irq)) != 0){ + return err; + } + } + + /* If the current card has already been configured + * or it's a piggyback card, do not try to allocate + * resources. + */ + if (!card->wandev.piggyback && !card->configured){ + + /* Configure hardware, load firmware, etc. */ + memset(&card->hw, 0, sizeof(sdlahw_t)); + + /* for an S514 adapter, pass the CPU number and the slot number read */ + /* from 'router.conf' to the 'sdla_setup()' function via the 'port' */ + /* parameter */ + if (conf->S514_CPU_no[0]){ + + card->hw.S514_cpu_no[0] = conf->S514_CPU_no[0]; + card->hw.S514_slot_no = conf->PCI_slot_no; + card->hw.auto_pci_cfg = conf->auto_pci_cfg; + + if (card->hw.auto_pci_cfg == WANOPT_YES){ + printk(KERN_INFO "%s: Setting CPU to %c and Slot to Auto\n", + card->devname, card->hw.S514_cpu_no[0]); + }else{ + printk(KERN_INFO "%s: Setting CPU to %c and Slot to %i\n", + card->devname, card->hw.S514_cpu_no[0], card->hw.S514_slot_no); + } + + }else{ + /* 508 Card io port and irq initialization */ + card->hw.port = conf->ioport; + card->hw.irq = (conf->irq == 9) ? 2 : conf->irq; + } + + + /* Compute the virtual address of the card in kernel space */ + if(conf->maddr){ + card->hw.dpmbase = phys_to_virt(conf->maddr); + }else{ + card->hw.dpmbase = (void *)conf->maddr; + } + + card->hw.dpmsize = SDLA_WINDOWSIZE; + + /* set the adapter type if using an S514 adapter */ + card->hw.type = (conf->S514_CPU_no[0]) ? SDLA_S514 : conf->hw_opt[0]; + card->hw.pclk = conf->hw_opt[1]; + + err = sdla_setup(&card->hw, conf->data, conf->data_size); + if (err){ + printk(KERN_INFO "%s: Hardware setup Failed %i\n", + card->devname,err); + return err; + } + + if(card->hw.type != SDLA_S514) + irq = (conf->irq == 2) ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ + else + irq = card->hw.irq; + + /* request an interrupt vector - note that interrupts may be shared */ + /* when using the S514 PCI adapter */ + + if(request_irq(irq, sdla_isr, + (card->hw.type == SDLA_S514) ? SA_SHIRQ : 0, + wandev->name, card)){ + + printk(KERN_INFO "%s: Can't reserve IRQ %d!\n", wandev->name, irq); + return -EINVAL; + } + + }else{ + printk(KERN_INFO "%s: Card Configured %lu or Piggybacking %i!\n", + wandev->name,card->configured,card->wandev.piggyback); + } + + + if (!card->configured){ + + /* Initialize the Spin lock */ + printk(KERN_INFO "%s: Initializing for SMP\n",wandev->name); + + /* Piggyback spin lock has already been initialized, + * in check_s514/s508_conflicts() */ + if (!card->wandev.piggyback){ + spin_lock_init(&card->wandev.lock); + } + + /* Intialize WAN device data space */ + wandev->irq = irq; + wandev->dma = 0; + if(card->hw.type != SDLA_S514){ + wandev->ioport = card->hw.port; + }else{ + wandev->S514_cpu_no[0] = card->hw.S514_cpu_no[0]; + wandev->S514_slot_no = card->hw.S514_slot_no; + } + wandev->maddr = (unsigned long)card->hw.dpmbase; + wandev->msize = card->hw.dpmsize; + wandev->hw_opt[0] = card->hw.type; + wandev->hw_opt[1] = card->hw.pclk; + wandev->hw_opt[2] = card->hw.memory; + wandev->hw_opt[3] = card->hw.fwid; + } + + /* Protocol-specific initialization */ + switch (card->hw.fwid) { + + case SFID_X25_502: + case SFID_X25_508: + printk(KERN_INFO "%s: Starting X.25 Protocol Init.\n", + card->devname); + err = wpx_init(card, conf); + break; + case SFID_FR502: + case SFID_FR508: + printk(KERN_INFO "%s: Starting Frame Relay Protocol Init.\n", + card->devname); + err = wpf_init(card, conf); + break; + case SFID_PPP502: + case SFID_PPP508: + printk(KERN_INFO "%s: Starting PPP Protocol Init.\n", + card->devname); + err = wpp_init(card, conf); + break; + + case SFID_CHDLC508: + case SFID_CHDLC514: + if (conf->ft1){ + printk(KERN_INFO "%s: Starting FT1 CSU/DSU Config Driver.\n", + card->devname); + err = wpft1_init(card, conf); + break; + + }else if (conf->config_id == WANCONFIG_MPPP){ + printk(KERN_INFO "%s: Starting Multi-Port PPP Protocol Init.\n", + card->devname); + err = wsppp_init(card,conf); + break; + + }else{ + printk(KERN_INFO "%s: Starting CHDLC Protocol Init.\n", + card->devname); + err = wpc_init(card, conf); + break; + } + default: + printk(KERN_INFO "%s: Error, Firmware is not supported %X %X!\n", + wandev->name,card->hw.fwid,SFID_CHDLC508); + err = -EPROTONOSUPPORT; + } + + if (err != 0){ + if (err == -EPROTONOSUPPORT){ + printk(KERN_INFO + "%s: Error, Protocol selected has not been compiled!\n", + card->devname); + printk(KERN_INFO + "%s: Re-configure the kernel and re-build the modules!\n", + card->devname); + } + + release_hw(card); + wandev->state = WAN_UNCONFIGURED; + return err; + } + + + /* Reserve I/O region and schedule background task */ + if(card->hw.type != SDLA_S514 && !card->wandev.piggyback) + if (!request_region(card->hw.port, card->hw.io_range, + wandev->name)) { + printk(KERN_WARNING "port 0x%04x busy\n", card->hw.port); + release_hw(card); + wandev->state = WAN_UNCONFIGURED; + return -EBUSY; + } + + /* Only use the polling routine for the X25 protocol */ + + card->wandev.critical=0; + return 0; +} + +/*================================================================== + * configure_s508_card + * + * For a S508 adapter, check for a possible configuration error in that + * we are loading an adapter in the same IO port as a previously loaded S508 + * card. + */ + +static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int *irq) +{ + unsigned long smp_flags; + int i; + + if (conf->ioport <= 0) { + printk(KERN_INFO + "%s: can't configure without I/O port address!\n", + card->wandev.name); + return -EINVAL; + } + + if (conf->irq <= 0) { + printk(KERN_INFO "%s: can't configure without IRQ!\n", + card->wandev.name); + return -EINVAL; + } + + if (test_bit(0,&card->configured)) + return 0; + + + /* Check for already loaded card with the same IO port and IRQ + * If found, copy its hardware configuration and use its + * resources (i.e. piggybacking) + */ + + for (i = 0; i < ncards; i++) { + sdla_t *nxt_card = &card_array[i]; + + /* Skip the current card ptr */ + if (nxt_card == card) + continue; + + + /* Find a card that is already configured with the + * same IO Port */ + if ((nxt_card->hw.type == SDLA_S508) && + (nxt_card->hw.port == conf->ioport) && + (nxt_card->next == NULL)){ + + /* We found a card the card that has same configuration + * as us. This means, that we must setup this card in + * piggibacking mode. However, only CHDLC and MPPP protocol + * support this setup */ + + if ((conf->config_id == WANCONFIG_CHDLC || + conf->config_id == WANCONFIG_MPPP) && + (nxt_card->wandev.config_id == WANCONFIG_CHDLC || + nxt_card->wandev.config_id == WANCONFIG_MPPP)){ + + *irq = nxt_card->hw.irq; + memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t)); + + /* The master could already be running, we must + * set this as a critical area */ + lock_adapter_irq(&nxt_card->wandev.lock, &smp_flags); + + nxt_card->next = card; + card->next = nxt_card; + + card->wandev.piggyback = WANOPT_YES; + + /* We must initialise the piggiback spin lock here + * since isr will try to lock card->next if it + * exists */ + spin_lock_init(&card->wandev.lock); + + unlock_adapter_irq(&nxt_card->wandev.lock, &smp_flags); + break; + }else{ + /* Trying to run piggibacking with a wrong protocol */ + printk(KERN_INFO "%s: ERROR: Resource busy, ioport: 0x%x\n" + "%s: This protocol doesn't support\n" + "%s: multi-port operation!\n", + card->devname,nxt_card->hw.port, + card->devname,card->devname); + return -EEXIST; + } + } + } + + + /* Make sure I/O port region is available only if we are the + * master device. If we are running in piggybacking mode, + * we will use the resources of the master card. */ + if (!card->wandev.piggyback) { + struct resource *rr = + request_region(conf->ioport, SDLA_MAXIORANGE, "sdlamain"); + release_region(conf->ioport, SDLA_MAXIORANGE); + + if (!rr) { + printk(KERN_INFO + "%s: I/O region 0x%X - 0x%X is in use!\n", + card->wandev.name, conf->ioport, + conf->ioport + SDLA_MAXIORANGE - 1); + return -EINVAL; + } + } + + return 0; +} + +/*================================================================== + * configure_s514_card + * + * For a S514 adapter, check for a possible configuration error in that + * we are loading an adapter in the same slot as a previously loaded S514 + * card. + */ + + +static int check_s514_conflicts(sdla_t* card,wandev_conf_t* conf, int *irq) +{ + unsigned long smp_flags; + int i; + + if (test_bit(0,&card->configured)) + return 0; + + + /* Check for already loaded card with the same IO port and IRQ + * If found, copy its hardware configuration and use its + * resources (i.e. piggybacking) + */ + + for (i = 0; i < ncards; i ++) { + + sdla_t* nxt_card = &card_array[i]; + if(nxt_card == card) + continue; + + if((nxt_card->hw.type == SDLA_S514) && + (nxt_card->hw.S514_slot_no == conf->PCI_slot_no) && + (nxt_card->hw.S514_cpu_no[0] == conf->S514_CPU_no[0])&& + (nxt_card->next == NULL)){ + + + if ((conf->config_id == WANCONFIG_CHDLC || + conf->config_id == WANCONFIG_MPPP) && + (nxt_card->wandev.config_id == WANCONFIG_CHDLC || + nxt_card->wandev.config_id == WANCONFIG_MPPP)){ + + *irq = nxt_card->hw.irq; + memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t)); + + /* The master could already be running, we must + * set this as a critical area */ + lock_adapter_irq(&nxt_card->wandev.lock,&smp_flags); + nxt_card->next = card; + card->next = nxt_card; + + card->wandev.piggyback = WANOPT_YES; + + /* We must initialise the piggiback spin lock here + * since isr will try to lock card->next if it + * exists */ + spin_lock_init(&card->wandev.lock); + + unlock_adapter_irq(&nxt_card->wandev.lock,&smp_flags); + + }else{ + /* Trying to run piggibacking with a wrong protocol */ + printk(KERN_INFO "%s: ERROR: Resource busy: CPU %c PCISLOT %i\n" + "%s: This protocol doesn't support\n" + "%s: multi-port operation!\n", + card->devname, + conf->S514_CPU_no[0],conf->PCI_slot_no, + card->devname,card->devname); + return -EEXIST; + } + } + } + + return 0; +} + + + +/*============================================================================ + * Shut down WAN link driver. + * o shut down adapter hardware + * o release system resources. + * + * This function is called by the router when device is being unregistered or + * when it handles ROUTER_DOWN IOCTL. + */ +static int shutdown(struct wan_device* wandev) +{ + sdla_t *card; + int err=0; + + /* sanity checks */ + if ((wandev == NULL) || (wandev->private == NULL)){ + return -EFAULT; + } + + if (wandev->state == WAN_UNCONFIGURED){ + return 0; + } + + card = wandev->private; + + if (card->tty_opt){ + if (card->tty_open){ + printk(KERN_INFO + "%s: Shutdown Failed: TTY is still open\n", + card->devname); + return -EBUSY; + } + } + + wandev->state = WAN_UNCONFIGURED; + + set_bit(PERI_CRIT,(void*)&wandev->critical); + + /* In case of piggibacking, make sure that + * we never try to shutdown both devices at the same + * time, because they depend on one another */ + + if (card->disable_comm){ + card->disable_comm(card); + } + + /* Release Resources */ + release_hw(card); + + /* only free the allocated I/O range if not an S514 adapter */ + if (wandev->hw_opt[0] != SDLA_S514 && !card->configured){ + release_region(card->hw.port, card->hw.io_range); + } + + if (!card->configured){ + memset(&card->hw, 0, sizeof(sdlahw_t)); + if (card->next){ + memset(&card->next->hw, 0, sizeof(sdlahw_t)); + } + } + + + clear_bit(PERI_CRIT,(void*)&wandev->critical); + return err; +} + +static void release_hw (sdla_t *card) +{ + sdla_t *nxt_card; + + + /* Check if next device exists */ + if (card->next){ + nxt_card = card->next; + /* If next device is down then release resources */ + if (nxt_card->wandev.state == WAN_UNCONFIGURED){ + if (card->wandev.piggyback){ + /* If this device is piggyback then use + * information of the master device + */ + printk(KERN_INFO "%s: Piggyback shutting down\n",card->devname); + sdla_down(&card->next->hw); + free_irq(card->wandev.irq, card->next); + card->configured = 0; + card->next->configured = 0; + card->wandev.piggyback = 0; + }else{ + /* Master device shutting down */ + printk(KERN_INFO "%s: Master shutting down\n",card->devname); + sdla_down(&card->hw); + free_irq(card->wandev.irq, card); + card->configured = 0; + card->next->configured = 0; + } + }else{ + printk(KERN_INFO "%s: Device still running %i\n", + nxt_card->devname,nxt_card->wandev.state); + + card->configured = 1; + } + }else{ + printk(KERN_INFO "%s: Master shutting down\n",card->devname); + sdla_down(&card->hw); + free_irq(card->wandev.irq, card); + card->configured = 0; + } + return; +} + + +/*============================================================================ + * Driver I/O control. + * o verify arguments + * o perform requested action + * + * This function is called when router handles one of the reserved user + * IOCTLs. Note that 'arg' stil points to user address space. + */ +static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg) +{ + sdla_t* card; + int err; + + /* sanity checks */ + if ((wandev == NULL) || (wandev->private == NULL)) + return -EFAULT; + if (wandev->state == WAN_UNCONFIGURED) + return -ENODEV; + + card = wandev->private; + + if(card->hw.type != SDLA_S514){ + disable_irq(card->hw.irq); + } + + if (test_bit(SEND_CRIT, (void*)&wandev->critical)) { + return -EAGAIN; + } + + switch (cmd) { + case WANPIPE_DUMP: + err = ioctl_dump(wandev->private, (void*)arg); + break; + + case WANPIPE_EXEC: + err = ioctl_exec(wandev->private, (void*)arg, cmd); + break; + default: + err = -EINVAL; + } + + return err; +} + +/****** Driver IOCTL Handlers ***********************************************/ + +/*============================================================================ + * Dump adapter memory to user buffer. + * o verify request structure + * o copy request structure to kernel data space + * o verify length/offset + * o verify user buffer + * o copy adapter memory image to user buffer + * + * Note: when dumping memory, this routine switches curent dual-port memory + * vector, so care must be taken to avoid racing conditions. + */ +static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump) +{ + sdla_dump_t dump; + unsigned winsize; + unsigned long oldvec; /* DPM window vector */ + unsigned long smp_flags; + int err = 0; + + if(copy_from_user((void*)&dump, (void*)u_dump, sizeof(sdla_dump_t))) + return -EFAULT; + + if ((dump.magic != WANPIPE_MAGIC) || + (dump.offset + dump.length > card->hw.memory)) + return -EINVAL; + + winsize = card->hw.dpmsize; + + if(card->hw.type != SDLA_S514) { + + lock_adapter_irq(&card->wandev.lock, &smp_flags); + + oldvec = card->hw.vector; + while (dump.length) { + /* current offset */ + unsigned pos = dump.offset % winsize; + /* current vector */ + unsigned long vec = dump.offset - pos; + unsigned len = (dump.length > (winsize - pos)) ? + (winsize - pos) : dump.length; + /* relocate window */ + if (sdla_mapmem(&card->hw, vec) != 0) { + err = -EIO; + break; + } + + if(copy_to_user((void *)dump.ptr, + (u8 *)card->hw.dpmbase + pos, len)){ + + unlock_adapter_irq(&card->wandev.lock, &smp_flags); + return -EFAULT; + } + + dump.length -= len; + dump.offset += len; + dump.ptr = (char*)dump.ptr + len; + } + + sdla_mapmem(&card->hw, oldvec);/* restore DPM window position */ + unlock_adapter_irq(&card->wandev.lock, &smp_flags); + + }else { + + if(copy_to_user((void *)dump.ptr, + (u8 *)card->hw.dpmbase + dump.offset, dump.length)){ + return -EFAULT; + } + } + + return err; +} + +/*============================================================================ + * Execute adapter firmware command. + * o verify request structure + * o copy request structure to kernel data space + * o call protocol-specific 'exec' function + */ +static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int cmd) +{ + sdla_exec_t exec; + int err=0; + + if (card->exec == NULL && cmd == WANPIPE_EXEC){ + return -ENODEV; + } + + if(copy_from_user((void*)&exec, (void*)u_exec, sizeof(sdla_exec_t))) + return -EFAULT; + + if ((exec.magic != WANPIPE_MAGIC) || (exec.cmd == NULL)) + return -EINVAL; + + switch (cmd) { + case WANPIPE_EXEC: + err = card->exec(card, exec.cmd, exec.data); + break; + } + return err; +} + +/******* Miscellaneous ******************************************************/ + +/*============================================================================ + * SDLA Interrupt Service Routine. + * o acknowledge SDLA hardware interrupt. + * o call protocol-specific interrupt service routine, if any. + */ +STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs) +{ +#define card ((sdla_t*)dev_id) + + if(card->hw.type == SDLA_S514) { /* handle interrrupt on S514 */ + u32 int_status; + unsigned char CPU_no = card->hw.S514_cpu_no[0]; + unsigned char card_found_for_IRQ; + u8 IRQ_count = 0; + + for(;;) { + + read_S514_int_stat(&card->hw, &int_status); + + /* check if the interrupt is for this device */ + if(!((unsigned char)int_status & + (IRQ_CPU_A | IRQ_CPU_B))) + return IRQ_HANDLED; + + /* if the IRQ is for both CPUs on the same adapter, */ + /* then alter the interrupt status so as to handle */ + /* one CPU at a time */ + if(((unsigned char)int_status & (IRQ_CPU_A | IRQ_CPU_B)) + == (IRQ_CPU_A | IRQ_CPU_B)) { + int_status &= (CPU_no == S514_CPU_A) ? + ~IRQ_CPU_B : ~IRQ_CPU_A; + } + + card_found_for_IRQ = 0; + + /* check to see that the CPU number for this device */ + /* corresponds to the interrupt status read */ + switch (CPU_no) { + case S514_CPU_A: + if((unsigned char)int_status & + IRQ_CPU_A) + card_found_for_IRQ = 1; + break; + + case S514_CPU_B: + if((unsigned char)int_status & + IRQ_CPU_B) + card_found_for_IRQ = 1; + break; + } + + /* exit if the interrupt is for another CPU on the */ + /* same IRQ */ + if(!card_found_for_IRQ) + return IRQ_HANDLED; + + if (!card || + (card->wandev.state == WAN_UNCONFIGURED && !card->configured)){ + printk(KERN_INFO + "Received IRQ %d for CPU #%c\n", + irq, CPU_no); + printk(KERN_INFO + "IRQ for unconfigured adapter\n"); + S514_intack(&card->hw, int_status); + return IRQ_HANDLED; + } + + if (card->in_isr) { + printk(KERN_INFO + "%s: interrupt re-entrancy on IRQ %d\n", + card->devname, card->wandev.irq); + S514_intack(&card->hw, int_status); + return IRQ_HANDLED; + } + + spin_lock(&card->wandev.lock); + if (card->next){ + spin_lock(&card->next->wandev.lock); + } + + S514_intack(&card->hw, int_status); + if (card->isr) + card->isr(card); + + if (card->next){ + spin_unlock(&card->next->wandev.lock); + } + spin_unlock(&card->wandev.lock); + + /* handle a maximum of two interrupts (one for each */ + /* CPU on the adapter) before returning */ + if((++ IRQ_count) == 2) + return IRQ_HANDLED; + } + } + + else { /* handle interrupt on S508 adapter */ + + if (!card || ((card->wandev.state == WAN_UNCONFIGURED) && !card->configured)) + return IRQ_HANDLED; + + if (card->in_isr) { + printk(KERN_INFO + "%s: interrupt re-entrancy on IRQ %d!\n", + card->devname, card->wandev.irq); + return IRQ_HANDLED; + } + + spin_lock(&card->wandev.lock); + if (card->next){ + spin_lock(&card->next->wandev.lock); + } + + sdla_intack(&card->hw); + if (card->isr) + card->isr(card); + + if (card->next){ + spin_unlock(&card->next->wandev.lock); + } + spin_unlock(&card->wandev.lock); + + } + return IRQ_HANDLED; +#undef card +} + +/*============================================================================ + * This routine is called by the protocol-specific modules when network + * interface is being open. The only reason we need this, is because we + * have to call MOD_INC_USE_COUNT, but cannot include 'module.h' where it's + * defined more than once into the same kernel module. + */ +void wanpipe_open (sdla_t* card) +{ + ++card->open_cnt; +} + +/*============================================================================ + * This routine is called by the protocol-specific modules when network + * interface is being closed. The only reason we need this, is because we + * have to call MOD_DEC_USE_COUNT, but cannot include 'module.h' where it's + * defined more than once into the same kernel module. + */ +void wanpipe_close (sdla_t* card) +{ + --card->open_cnt; +} + +/*============================================================================ + * Set WAN device state. + */ +void wanpipe_set_state (sdla_t* card, int state) +{ + if (card->wandev.state != state) { + switch (state) { + case WAN_CONNECTED: + printk (KERN_INFO "%s: link connected!\n", + card->devname); + break; + + case WAN_CONNECTING: + printk (KERN_INFO "%s: link connecting...\n", + card->devname); + break; + + case WAN_DISCONNECTED: + printk (KERN_INFO "%s: link disconnected!\n", + card->devname); + break; + } + card->wandev.state = state; + } + card->state_tick = jiffies; +} + +sdla_t * wanpipe_find_card (char *name) +{ + int cnt; + for (cnt = 0; cnt < ncards; ++ cnt) { + sdla_t* card = &card_array[cnt]; + if (!strcmp(card->devname,name)) + return card; + } + return NULL; +} + +sdla_t * wanpipe_find_card_num (int num) +{ + if (num < 1 || num > ncards) + return NULL; + num--; + return &card_array[num]; +} + +/* + * @work_pointer: work_struct to be done; + * should already have PREPARE_WORK() or + * INIT_WORK() done on it by caller; + */ +void wanpipe_queue_work (struct work_struct *work_pointer) +{ + if (test_and_set_bit(1, (void*)&wanpipe_bh_critical)) + printk(KERN_INFO "CRITICAL IN QUEUING WORK\n"); + + queue_work(wanpipe_wq, work_pointer); + clear_bit(1,(void*)&wanpipe_bh_critical); +} + +void wakeup_sk_bh(struct net_device *dev) +{ + wanpipe_common_t *chan = dev->priv; + + if (test_bit(0,&chan->common_critical)) + return; + + if (chan->sk && chan->tx_timer){ + chan->tx_timer->expires=jiffies+1; + add_timer(chan->tx_timer); + } +} + +int change_dev_flags(struct net_device *dev, unsigned flags) +{ + struct ifreq if_info; + mm_segment_t fs = get_fs(); + int err; + + memset(&if_info, 0, sizeof(if_info)); + strcpy(if_info.ifr_name, dev->name); + if_info.ifr_flags = flags; + + set_fs(get_ds()); /* get user space block */ + err = devinet_ioctl(SIOCSIFFLAGS, &if_info); + set_fs(fs); + + return err; +} + +unsigned long get_ip_address(struct net_device *dev, int option) +{ + + struct in_ifaddr *ifaddr; + struct in_device *in_dev; + + if ((in_dev = __in_dev_get(dev)) == NULL){ + return 0; + } + + if ((ifaddr = in_dev->ifa_list)== NULL ){ + return 0; + } + + switch (option){ + + case WAN_LOCAL_IP: + return ifaddr->ifa_local; + break; + + case WAN_POINTOPOINT_IP: + return ifaddr->ifa_address; + break; + + case WAN_NETMASK_IP: + return ifaddr->ifa_mask; + break; + + case WAN_BROADCAST_IP: + return ifaddr->ifa_broadcast; + break; + default: + return 0; + } + + return 0; +} + +void add_gateway(sdla_t *card, struct net_device *dev) +{ + mm_segment_t oldfs; + struct rtentry route; + int res; + + memset((char*)&route,0,sizeof(struct rtentry)); + + ((struct sockaddr_in *) + &(route.rt_dst))->sin_addr.s_addr = 0; + ((struct sockaddr_in *) + &(route.rt_dst))->sin_family = AF_INET; + + ((struct sockaddr_in *) + &(route.rt_genmask))->sin_addr.s_addr = 0; + ((struct sockaddr_in *) + &(route.rt_genmask)) ->sin_family = AF_INET; + + + route.rt_flags = 0; + route.rt_dev = dev->name; + + oldfs = get_fs(); + set_fs(get_ds()); + res = ip_rt_ioctl(SIOCADDRT,&route); + set_fs(oldfs); + + if (res == 0){ + printk(KERN_INFO "%s: Gateway added for %s\n", + card->devname,dev->name); + } + + return; +} + +MODULE_LICENSE("GPL"); + +/****** End *********************************************************/ |