diff options
author | hayeswang <hayeswang@realtek.com> | 2014-01-02 11:25:10 +0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2014-01-01 22:54:15 -0500 |
commit | 43779f8dfb0051b2ecd5f17ea7ad089443278e82 (patch) | |
tree | 62e0e1cda157923e01d3f4d817f6e5568579deae /drivers/net/usb | |
parent | 507605a83533bc828b283e36fb443901318214e9 (diff) | |
download | op-kernel-dev-43779f8dfb0051b2ecd5f17ea7ad089443278e82.zip op-kernel-dev-43779f8dfb0051b2ecd5f17ea7ad089443278e82.tar.gz |
r8152: support RTL8153
Support new chip RTL8153 which is the USB 3.0 giga ethernet adapter.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/usb')
-rw-r--r-- | drivers/net/usb/cdc_ether.c | 10 | ||||
-rw-r--r-- | drivers/net/usb/r8152.c | 615 | ||||
-rw-r--r-- | drivers/net/usb/r815x.c | 2 |
3 files changed, 621 insertions, 6 deletions
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4b1c0f3..640406a 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -486,6 +486,7 @@ static const struct driver_info wwan_info = { #define ZTE_VENDOR_ID 0x19D2 #define DELL_VENDOR_ID 0x413C #define REALTEK_VENDOR_ID 0x0bda +#define SAMSUNG_VENDOR_ID 0x04e8 static const struct usb_device_id products[] = { /* BLACKLIST !! @@ -652,6 +653,15 @@ static const struct usb_device_id products[] = { .driver_info = 0, }, +#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) +/* Samsung USB Ethernet Adapters */ +{ + USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, +#endif + /* WHITELIST!!! * * CDC Ether uses two interfaces, not necessarily consecutive. diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index bc5d569..e3d878c 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -24,7 +24,7 @@ #include <linux/ipv6.h> /* Version Information */ -#define DRIVER_VERSION "v1.02.0 (2013/10/28)" +#define DRIVER_VERSION "v1.03.0 (2013/12/26)" #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>" #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" #define MODULENAME "r8152" @@ -39,15 +39,24 @@ #define PLA_RXFIFO_CTRL2 0xc0a8 #define PLA_FMC 0xc0b4 #define PLA_CFG_WOL 0xc0b6 +#define PLA_TEREDO_CFG 0xc0bc #define PLA_MAR 0xcd00 +#define PLA_BACKUP 0xd000 #define PAL_BDC_CR 0xd1a0 +#define PLA_TEREDO_TIMER 0xd2cc +#define PLA_REALWOW_TIMER 0xd2e8 #define PLA_LEDSEL 0xdd90 #define PLA_LED_FEATURE 0xdd92 #define PLA_PHYAR 0xde00 +#define PLA_BOOT_CTRL 0xe004 #define PLA_GPHY_INTR_IMR 0xe022 #define PLA_EEE_CR 0xe040 #define PLA_EEEP_CR 0xe080 #define PLA_MAC_PWR_CTRL 0xe0c0 +#define PLA_MAC_PWR_CTRL2 0xe0ca +#define PLA_MAC_PWR_CTRL3 0xe0cc +#define PLA_MAC_PWR_CTRL4 0xe0ce +#define PLA_WDT6_CTRL 0xe428 #define PLA_TCR0 0xe610 #define PLA_TCR1 0xe612 #define PLA_TXFIFO_CTRL 0xe618 @@ -73,16 +82,25 @@ #define PLA_BP_5 0xfc32 #define PLA_BP_6 0xfc34 #define PLA_BP_7 0xfc36 +#define PLA_BP_EN 0xfc38 +#define USB_U2P3_CTRL 0xb460 #define USB_DEV_STAT 0xb808 #define USB_USB_CTRL 0xd406 #define USB_PHY_CTRL 0xd408 #define USB_TX_AGG 0xd40a #define USB_RX_BUF_TH 0xd40c #define USB_USB_TIMER 0xd428 +#define USB_RX_EARLY_AGG 0xd42c #define USB_PM_CTRL_STATUS 0xd432 #define USB_TX_DMA 0xd434 +#define USB_TOLERANCE 0xd490 +#define USB_LPM_CTRL 0xd41a #define USB_UPS_CTRL 0xd800 +#define USB_MISC_0 0xd81a +#define USB_POWER_CUT 0xd80a +#define USB_AFE_CTRL2 0xd824 +#define USB_WDT11_CTRL 0xe43c #define USB_BP_BA 0xfc26 #define USB_BP_0 0xfc28 #define USB_BP_1 0xfc2a @@ -92,6 +110,7 @@ #define USB_BP_5 0xfc32 #define USB_BP_6 0xfc34 #define USB_BP_7 0xfc36 +#define USB_BP_EN 0xfc38 /* OCP Registers */ #define OCP_ALDPS_CONFIG 0x2010 @@ -101,6 +120,20 @@ #define OCP_BASE_MII 0xa400 #define OCP_EEE_AR 0xa41a #define OCP_EEE_DATA 0xa41c +#define OCP_PHY_STATUS 0xa420 +#define OCP_POWER_CFG 0xa430 +#define OCP_EEE_CFG 0xa432 +#define OCP_SRAM_ADDR 0xa436 +#define OCP_SRAM_DATA 0xa438 +#define OCP_DOWN_SPEED 0xa442 +#define OCP_EEE_CFG2 0xa5d0 +#define OCP_ADC_CFG 0xbc06 + +/* SRAM Register */ +#define SRAM_LPF_CFG 0x8012 +#define SRAM_10M_AMP1 0x8080 +#define SRAM_10M_AMP2 0x8082 +#define SRAM_IMPEDANCE 0x8084 /* PLA_RCR */ #define RCR_AAP 0x00000001 @@ -117,14 +150,17 @@ #define RXFIFO_THR2_FULL 0x00000060 #define RXFIFO_THR2_HIGH 0x00000038 #define RXFIFO_THR2_OOB 0x0000004a +#define RXFIFO_THR2_NORMAL 0x00a0 /* PLA_RXFIFO_CTRL2 */ #define RXFIFO_THR3_FULL 0x00000078 #define RXFIFO_THR3_HIGH 0x00000048 #define RXFIFO_THR3_OOB 0x0000005a +#define RXFIFO_THR3_NORMAL 0x0110 /* PLA_TXFIFO_CTRL */ #define TXFIFO_THR_NORMAL 0x00400008 +#define TXFIFO_THR_NORMAL2 0x01000008 /* PLA_FMC */ #define FMC_FCR_MCU_EN 0x0001 @@ -132,6 +168,9 @@ /* PLA_EEEP_CR */ #define EEEP_CR_EEEP_TX 0x0002 +/* PLA_WDT6_CTRL */ +#define WDT6_SET_MODE 0x0010 + /* PLA_TCR0 */ #define TCR0_TX_EMPTY 0x0800 #define TCR0_AUTO_FIFO 0x0080 @@ -169,6 +208,12 @@ /* PLA_CFG_WOL */ #define MAGIC_EN 0x0001 +/* PLA_TEREDO_CFG */ +#define TEREDO_SEL 0x8000 +#define TEREDO_WAKE_MASK 0x7f00 +#define TEREDO_RS_EVENT_MASK 0x00fe +#define OOB_TEREDO_EN 0x0001 + /* PAL_BDC_CR */ #define ALDPS_PROXY_MODE 0x0001 @@ -186,6 +231,25 @@ #define D3_CLK_GATED_EN 0x00004000 #define MCU_CLK_RATIO 0x07010f07 #define MCU_CLK_RATIO_MASK 0x0f0f0f0f +#define ALDPS_SPDWN_RATIO 0x0f87 + +/* PLA_MAC_PWR_CTRL2 */ +#define EEE_SPDWN_RATIO 0x8007 + +/* PLA_MAC_PWR_CTRL3 */ +#define PKT_AVAIL_SPDWN_EN 0x0100 +#define SUSPEND_SPDWN_EN 0x0004 +#define U1U2_SPDWN_EN 0x0002 +#define L1_SPDWN_EN 0x0001 + +/* PLA_MAC_PWR_CTRL4 */ +#define PWRSAVE_SPDWN_EN 0x1000 +#define RXDV_SPDWN_EN 0x0800 +#define TX10MIDLE_EN 0x0100 +#define TP100_SPDWN_EN 0x0020 +#define TP500_SPDWN_EN 0x0010 +#define TP1000_SPDWN_EN 0x0008 +#define EEE_SPDWN_EN 0x0001 /* PLA_GPHY_INTR_IMR */ #define GPHY_STS_MSK 0x0001 @@ -200,6 +264,9 @@ #define EEE_RX_EN 0x0001 #define EEE_TX_EN 0x0002 +/* PLA_BOOT_CTRL */ +#define AUTOLOAD_DONE 0x0002 + /* USB_DEV_STAT */ #define STAT_SPEED_MASK 0x0006 #define STAT_SPEED_HIGH 0x0000 @@ -209,7 +276,9 @@ #define TX_AGG_MAX_THRESHOLD 0x03 /* USB_RX_BUF_TH */ +#define RX_THR_SUPPER 0x0c350180 #define RX_THR_HIGH 0x7a120180 +#define RX_THR_SLOW 0xffff0180 /* USB_TX_DMA */ #define TEST_MODE_DISABLE 0x00000001 @@ -224,12 +293,50 @@ /* USB_USB_CTRL */ #define RX_AGG_DISABLE 0x0010 +/* USB_U2P3_CTRL */ +#define U2P3_ENABLE 0x0001 + +/* USB_POWER_CUT */ +#define PWR_EN 0x0001 +#define PHASE2_EN 0x0008 + +/* USB_MISC_0 */ +#define PCUT_STATUS 0x0001 + +/* USB_RX_EARLY_AGG */ +#define EARLY_AGG_SUPPER 0x0e832981 +#define EARLY_AGG_HIGH 0x0e837a12 +#define EARLY_AGG_SLOW 0x0e83ffff + +/* USB_WDT11_CTRL */ +#define TIMER11_EN 0x0001 + +/* USB_LPM_CTRL */ +#define LPM_TIMER_MASK 0x0c +#define LPM_TIMER_500MS 0x04 /* 500 ms */ +#define LPM_TIMER_500US 0x0c /* 500 us */ + +/* USB_AFE_CTRL2 */ +#define SEN_VAL_MASK 0xf800 +#define SEN_VAL_NORMAL 0xa000 +#define SEL_RXIDLE 0x0100 + /* OCP_ALDPS_CONFIG */ #define ENPWRSAVE 0x8000 #define ENPDNPS 0x0200 #define LINKENA 0x0100 #define DIS_SDSAVE 0x0010 +/* OCP_PHY_STATUS */ +#define PHY_STAT_MASK 0x0007 +#define PHY_STAT_LAN_ON 3 +#define PHY_STAT_PWRDN 5 + +/* OCP_POWER_CFG */ +#define EEE_CLKDIV_EN 0x8000 +#define EN_ALDPS 0x0004 +#define EN_10M_PLLOFF 0x0001 + /* OCP_EEE_CONFIG1 */ #define RG_TXLPI_MSK_HFDUP 0x8000 #define RG_MATCLR_EN 0x4000 @@ -264,7 +371,36 @@ #define EEE_ADDR 0x003C #define EEE_DATA 0x0002 +/* OCP_EEE_CFG */ +#define CTAP_SHORT_EN 0x0040 +#define EEE10_EN 0x0010 + +/* OCP_DOWN_SPEED */ +#define EN_10M_BGOFF 0x0080 + +/* OCP_EEE_CFG2 */ +#define MY1000_EEE 0x0004 +#define MY100_EEE 0x0002 + +/* OCP_ADC_CFG */ +#define CKADSEL_L 0x0100 +#define ADC_EN 0x0080 +#define EN_EMI_L 0x0040 + +/* SRAM_LPF_CFG */ +#define LPF_AUTO_TUNE 0x8000 + +/* SRAM_10M_AMP1 */ +#define GDAC_IB_UPALL 0x0008 + +/* SRAM_10M_AMP2 */ +#define AMP_DN 0x0200 + +/* SRAM_IMPEDANCE */ +#define RX_DRIVING_MASK 0x6000 + enum rtl_register_content { + _1000bps = 0x10, _100bps = 0x08, _10bps = 0x04, LINK_STATUS = 0x02, @@ -306,6 +442,10 @@ enum rtl8152_flags { /* Define these values to match your device */ #define VENDOR_ID_REALTEK 0x0bda #define PRODUCT_ID_RTL8152 0x8152 +#define PRODUCT_ID_RTL8153 0x8153 + +#define VENDOR_ID_SAMSUNG 0x04e8 +#define PRODUCT_ID_SAMSUNG 0xa101 #define MCU_TYPE_PLA 0x0100 #define MCU_TYPE_USB 0x0000 @@ -388,7 +528,11 @@ struct r8152 { enum rtl_version { RTL_VER_UNKNOWN = 0, RTL_VER_01, - RTL_VER_02 + RTL_VER_02, + RTL_VER_03, + RTL_VER_04, + RTL_VER_05, + RTL_VER_MAX }; /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). @@ -704,6 +848,18 @@ static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2); } +static void sram_write(struct r8152 *tp, u16 addr, u16 data) +{ + ocp_reg_write(tp, OCP_SRAM_ADDR, addr); + ocp_reg_write(tp, OCP_SRAM_DATA, data); +} + +static u16 sram_read(struct r8152 *tp, u16 addr) +{ + ocp_reg_write(tp, OCP_SRAM_ADDR, addr); + return ocp_reg_read(tp, OCP_SRAM_DATA); +} + static int read_mii_word(struct net_device *netdev, int phy_id, int reg) { struct r8152 *tp = netdev_priv(netdev); @@ -1497,6 +1653,39 @@ static int rtl8152_enable(struct r8152 *tp) return rtl_enable(tp); } +static void r8153_set_rx_agg(struct r8152 *tp) +{ + u8 speed; + + speed = rtl8152_get_speed(tp); + if (speed & _1000bps) { + if (tp->udev->speed == USB_SPEED_SUPER) { + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, + RX_THR_SUPPER); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, + EARLY_AGG_SUPPER); + } else { + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, + RX_THR_HIGH); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, + EARLY_AGG_HIGH); + } + } else { + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, + EARLY_AGG_SLOW); + } +} + +static int rtl8153_enable(struct r8152 *tp) +{ + set_tx_qlen(tp); + rtl_set_eee_plus(tp); + r8153_set_rx_agg(tp); + + return rtl_enable(tp); +} + static void rtl8152_disable(struct r8152 *tp) { struct net_device_stats *stats = rtl8152_get_stats(tp->netdev); @@ -1695,15 +1884,269 @@ static inline void r8152b_enable_aldps(struct r8152 *tp) LINKENA | DIS_SDSAVE); } +static void r8153_hw_phy_cfg(struct r8152 *tp) +{ + u32 ocp_data; + u16 data; + + ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); + r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE); + + if (tp->version == RTL_VER_03) { + data = ocp_reg_read(tp, OCP_EEE_CFG); + data &= ~CTAP_SHORT_EN; + ocp_reg_write(tp, OCP_EEE_CFG, data); + } + + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EEE_CLKDIV_EN; + ocp_reg_write(tp, OCP_POWER_CFG, data); + + data = ocp_reg_read(tp, OCP_DOWN_SPEED); + data |= EN_10M_BGOFF; + ocp_reg_write(tp, OCP_DOWN_SPEED, data); + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EN_10M_PLLOFF; + ocp_reg_write(tp, OCP_POWER_CFG, data); + data = sram_read(tp, SRAM_IMPEDANCE); + data &= ~RX_DRIVING_MASK; + sram_write(tp, SRAM_IMPEDANCE, data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); + ocp_data |= PFM_PWM_SWITCH; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); + + data = sram_read(tp, SRAM_LPF_CFG); + data |= LPF_AUTO_TUNE; + sram_write(tp, SRAM_LPF_CFG, data); + + data = sram_read(tp, SRAM_10M_AMP1); + data |= GDAC_IB_UPALL; + sram_write(tp, SRAM_10M_AMP1, data); + data = sram_read(tp, SRAM_10M_AMP2); + data |= AMP_DN; + sram_write(tp, SRAM_10M_AMP2, data); +} + +static void r8153_u1u2en(struct r8152 *tp, int enable) +{ + u8 u1u2[8]; + + if (enable) + memset(u1u2, 0xff, sizeof(u1u2)); + else + memset(u1u2, 0x00, sizeof(u1u2)); + + usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2); +} + +static void r8153_u2p3en(struct r8152 *tp, int enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL); + if (enable) + ocp_data |= U2P3_ENABLE; + else + ocp_data &= ~U2P3_ENABLE; + ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data); +} + +static void r8153_power_cut_en(struct r8152 *tp, int enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT); + if (enable) + ocp_data |= PWR_EN | PHASE2_EN; + else + ocp_data &= ~(PWR_EN | PHASE2_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + ocp_data &= ~PCUT_STATUS; + ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); +} + +static void r8153_teredo_off(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); + ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0); + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0); +} + +static void r8153_first_init(struct r8152 *tp) +{ + u32 ocp_data; + int i; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); + ocp_data |= RXDY_GATED_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); + + r8153_teredo_off(tp); + + ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); + ocp_data &= ~RCR_ACPT_ALL; + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); + + r8153_hw_phy_cfg(tp); + + rtl8152_nic_reset(tp); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + ocp_data &= ~NOW_IS_OOB; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data &= ~MCU_BORW_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data |= RE_INIT_LL; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); + ocp_data &= ~CPCR_RX_VLAN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); + ocp_data |= TCR0_AUTO_FIFO; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); + + rtl8152_nic_reset(tp); + + /* rx share fifo credit full threshold */ + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL); + /* TX share fifo free credit full threshold */ + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2); + + // rx aggregation + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~RX_AGG_DISABLE; + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); +} + +static void r8153_enter_oob(struct r8152 *tp) +{ + u32 ocp_data; + int i; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + ocp_data &= ~NOW_IS_OOB; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + + rtl8152_disable(tp); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); + ocp_data |= RE_INIT_LL; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); + + for (i = 0; i < 1000; i++) { + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + if (ocp_data & LINK_LIST_READY) + break; + mdelay(1); + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL); + ocp_data |= MAGIC_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); + ocp_data &= ~TEREDO_WAKE_MASK; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); + ocp_data |= CPCR_RX_VLAN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); + ocp_data |= ALDPS_PROXY_MODE; + ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); + ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); + + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); + ocp_data &= ~RXDY_GATED_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); + + ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); + ocp_data |= RCR_APM | RCR_AM | RCR_AB; + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); +} + +static void r8153_disable_aldps(struct r8152 *tp) +{ + u16 data; + + data = ocp_reg_read(tp, OCP_POWER_CFG); + data &= ~EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); + msleep(20); +} + +static void r8153_enable_aldps(struct r8152 *tp) +{ + u16 data; + + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); +} + static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) { - u16 bmcr, anar; + u16 bmcr, anar, gbcr; int ret = 0; cancel_delayed_work_sync(&tp->schedule); anar = r8152_mdio_read(tp, MII_ADVERTISE); anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | ADVERTISE_100HALF | ADVERTISE_100FULL); + if (tp->mii.supports_gmii) { + gbcr = r8152_mdio_read(tp, MII_CTRL1000); + gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + } else { + gbcr = 0; + } if (autoneg == AUTONEG_DISABLE) { if (speed == SPEED_10) { @@ -1712,6 +2155,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) } else if (speed == SPEED_100) { bmcr = BMCR_SPEED100; anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; + } else if (speed == SPEED_1000 && tp->mii.supports_gmii) { + bmcr = BMCR_SPEED1000; + gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; } else { ret = -EINVAL; goto out; @@ -1733,6 +2179,16 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) anar |= ADVERTISE_10HALF; anar |= ADVERTISE_100HALF; } + } else if (speed == SPEED_1000 && tp->mii.supports_gmii) { + if (duplex == DUPLEX_FULL) { + anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; + anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; + gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; + } else { + anar |= ADVERTISE_10HALF; + anar |= ADVERTISE_100HALF; + gbcr |= ADVERTISE_1000HALF; + } } else { ret = -EINVAL; goto out; @@ -1741,6 +2197,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) bmcr = BMCR_ANENABLE | BMCR_ANRESTART; } + if (tp->mii.supports_gmii) + r8152_mdio_write(tp, MII_CTRL1000, gbcr); + r8152_mdio_write(tp, MII_ADVERTISE, anar); r8152_mdio_write(tp, MII_BMCR, bmcr); @@ -1762,6 +2221,15 @@ static void rtl8152_down(struct r8152 *tp) r8152b_enable_aldps(tp); } +static void rtl8153_down(struct r8152 *tp) +{ + r8153_u1u2en(tp, 0); + r8153_power_cut_en(tp, 0); + r8153_disable_aldps(tp); + r8153_enter_oob(tp); + r8153_enable_aldps(tp); +} + static void set_carrier(struct r8152 *tp) { struct net_device *netdev = tp->netdev; @@ -1821,7 +2289,9 @@ static int rtl8152_open(struct net_device *netdev) return res; } - rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); + rtl8152_set_speed(tp, AUTONEG_ENABLE, + tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, + DUPLEX_FULL); tp->speed = 0; netif_carrier_off(netdev); netif_start_queue(netdev); @@ -1861,6 +2331,13 @@ static void rtl_clear_bp(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0); } +static void r8153_clear_bp(struct r8152 *tp) +{ + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0); + ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0); + rtl_clear_bp(tp); +} + static void r8152b_enable_eee(struct r8152 *tp) { u32 ocp_data; @@ -1884,6 +2361,22 @@ static void r8152b_enable_eee(struct r8152 *tp) ocp_reg_write(tp, OCP_EEE_AR, 0x0000); } +static void r8153_enable_eee(struct r8152 *tp) +{ + u32 ocp_data; + u16 data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); + ocp_data |= EEE_RX_EN | EEE_TX_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); + data = ocp_reg_read(tp, OCP_EEE_CFG); + data |= EEE10_EN; + ocp_reg_write(tp, OCP_EEE_CFG, data); + data = ocp_reg_read(tp, OCP_EEE_CFG2); + data |= MY1000_EEE | MY100_EEE; + ocp_reg_write(tp, OCP_EEE_CFG2, data); +} + static void r8152b_enable_fc(struct r8152 *tp) { u16 anar; @@ -1953,6 +2446,75 @@ static void r8152b_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); } +static void r8153_init(struct r8152 *tp) +{ + u32 ocp_data; + int i; + + r8153_u1u2en(tp, 0); + + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + msleep(20); + } + + for (i = 0; i < 500; i++) { + ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK; + if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN) + break; + msleep(20); + } + + r8153_u2p3en(tp, 0); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL); + ocp_data &= ~TIMER11_EN; + ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data); + + r8153_clear_bp(tp); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); + ocp_data &= ~LED_MODE_MASK; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL); + ocp_data &= ~LPM_TIMER_MASK; + if (tp->udev->speed == USB_SPEED_SUPER) + ocp_data |= LPM_TIMER_500US; + else + ocp_data |= LPM_TIMER_500MS; + ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2); + ocp_data &= ~SEN_VAL_MASK; + ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE; + ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data); + + r8153_power_cut_en(tp, 0); + r8153_u1u2en(tp, 1); + + r8153_first_init(tp); + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, + PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | + U1U2_SPDWN_EN | L1_SPDWN_EN); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, + PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | + TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN | + EEE_SPDWN_EN); + + r8153_enable_eee(tp); + r8153_enable_aldps(tp); + r8152b_enable_fc(tp); + + r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | + BMCR_ANRESTART); +} + static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) { struct r8152 *tp = usb_get_intfdata(intf); @@ -1978,7 +2540,9 @@ static int rtl8152_resume(struct usb_interface *intf) tp->rtl_ops.init(tp); netif_device_attach(tp->netdev); if (netif_running(tp->netdev)) { - rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); + rtl8152_set_speed(tp, AUTONEG_ENABLE, + tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, + DUPLEX_FULL); tp->speed = 0; netif_carrier_off(tp->netdev); set_bit(WORK_ENABLE, &tp->flags); @@ -2082,6 +2646,18 @@ static void r8152b_get_version(struct r8152 *tp) case 0x4c10: tp->version = RTL_VER_02; break; + case 0x5c00: + tp->version = RTL_VER_03; + tp->mii.supports_gmii = 1; + break; + case 0x5c10: + tp->version = RTL_VER_04; + tp->mii.supports_gmii = 1; + break; + case 0x5c20: + tp->version = RTL_VER_05; + tp->mii.supports_gmii = 1; + break; default: netif_info(tp, probe, tp->netdev, "Unknown version 0x%04x\n", version); @@ -2104,6 +2680,11 @@ static void rtl8152_unload(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); } +static void rtl8153_unload(struct r8152 *tp) +{ + r8153_power_cut_en(tp, 1); +} + static bool rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id) { struct rtl_ops *ops = &tp->rtl_ops; @@ -2119,6 +2700,28 @@ static bool rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id) ops->down = rtl8152_down; ops->unload = rtl8152_unload; break; + case PRODUCT_ID_RTL8153: + ops->init = r8153_init; + ops->enable = rtl8153_enable; + ops->disable = rtl8152_disable; + ops->down = rtl8153_down; + ops->unload = rtl8153_unload; + break; + default: + ret = -EFAULT; + break; + } + break; + + case VENDOR_ID_SAMSUNG: + switch (id->idProduct) { + case PRODUCT_ID_SAMSUNG: + ops->init = r8153_init; + ops->enable = rtl8153_enable; + ops->disable = rtl8152_disable; + ops->down = rtl8153_down; + ops->unload = rtl8153_unload; + break; default: ret = false; break; @@ -2227,6 +2830,8 @@ static void rtl8152_disconnect(struct usb_interface *intf) /* table of devices that work with this driver */ static struct usb_device_id rtl8152_table[] = { {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, + {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)}, + {USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)}, {} }; diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c index 2df2f4f..5fd2ca6 100644 --- a/drivers/net/usb/r815x.c +++ b/drivers/net/usb/r815x.c @@ -226,7 +226,7 @@ static const struct usb_device_id products[] = { { USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), -#if defined(CONFIG_USB_RTL8153) || defined(CONFIG_USB_RTL8153_MODULE) +#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) .driver_info = 0, #else .driver_info = (unsigned long) &r8153_info, |