summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip
diff options
context:
space:
mode:
authorAnton Vorontsov <avorontsov@ru.mvista.com>2008-05-16 23:04:51 +0400
committerJeff Garzik <jgarzik@redhat.com>2008-05-22 06:19:27 -0400
commit7fa0cba330af3a24f43ac85e14b0b5fed557cdab (patch)
tree37fdfdaa8ef3ff09a2f56ab783c15ee31bba5185 /drivers/net/tulip
parent7f80202bb964dd9c5b408af8100c7f0fd39a15c7 (diff)
downloadop-kernel-dev-7fa0cba330af3a24f43ac85e14b0b5fed557cdab.zip
op-kernel-dev-7fa0cba330af3a24f43ac85e14b0b5fed557cdab.tar.gz
uli526x: add support for netpoll
This patch adds netpoll support for the uli526x ethernet driver -- simply call the interrupt handler for polling. To do this without disable_irq()/enable_irq() pair we should fully protect the handler. Luckily, it's already using irqsave spinlock, the only unprotected place is interrupts re-enabling write. It was safe to re-enable interrupts without holding the spinlock, but with netpoll possibility now it doesn't seem so. Patch was tested using netconsole and KGDBoE. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/tulip')
-rw-r--r--drivers/net/tulip/uli526x.c16
1 files changed, 15 insertions, 1 deletions
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 2511ca7..e9e62862 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -225,6 +225,9 @@ static void uli526x_set_filter_mode(struct net_device *);
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
static irqreturn_t uli526x_interrupt(int, void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev);
+#endif
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
@@ -339,6 +342,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
dev->get_stats = &uli526x_get_stats;
dev->set_multicast_list = &uli526x_set_filter_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &uli526x_poll;
+#endif
spin_lock_init(&db->lock);
@@ -681,8 +687,9 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id)
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
if ( !(db->cr5_data & 0x180c1) ) {
- spin_unlock_irqrestore(&db->lock, flags);
+ /* Restore CR7 to enable interrupt mask */
outl(db->cr7_data, ioaddr + DCR7);
+ spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
@@ -715,6 +722,13 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev)
+{
+ /* ISR grabs the irqsave lock, so this should be safe */
+ uli526x_interrupt(dev->irq, dev);
+}
+#endif
/*
* Free TX resource after TX complete
OpenPOWER on IntegriCloud