summaryrefslogtreecommitdiffstats
path: root/drivers/net/tulip
diff options
context:
space:
mode:
authorThibaut VARENE <T-Bone@parisc-linux.org>2007-03-12 02:31:30 -0700
committerJeff Garzik <jeff@garzik.org>2007-04-28 11:00:58 -0400
commiteb117b1786804f2e128b871879ffe8f6a2701378 (patch)
tree9f2788c5abbe5eff39495a53bbf9bef34d318ca1 /drivers/net/tulip
parentb3bff39a2b3574542f5007e19038393dfdd64c85 (diff)
downloadop-kernel-dev-eb117b1786804f2e128b871879ffe8f6a2701378.zip
op-kernel-dev-eb117b1786804f2e128b871879ffe8f6a2701378.tar.gz
TULIP: Natsemi dp83840a PHY fix
Fix a problem with Tulip 21142 HP branded PCI cards (PN#: B5509-66001), which feature a NatSemi DP83840A PHY. Without that patch, it is impossible to properly initialize the card's PHY, and it's thus impossible to monitor/configure it. [VAL: I'm happy with the 1.5 ms max delay; it doesn't seem excessive.] Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/tulip')
-rw-r--r--drivers/net/tulip/media.c18
1 files changed, 17 insertions, 1 deletions
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 1594160..b562566 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -263,11 +263,27 @@ void tulip_select_media(struct net_device *dev, int startup)
u16 *reset_sequence = &((u16*)(p+3))[init_length];
int reset_length = p[2 + init_length*2];
misc_info = reset_sequence + reset_length;
- if (startup)
+ if (startup) {
+ int timeout = 10; /* max 1 ms */
for (i = 0; i < reset_length; i++)
iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
+
+ /* flush posted writes */
+ ioread32(ioaddr + CSR15);
+
+ /* Sect 3.10.3 in DP83840A.pdf (p39) */
+ udelay(500);
+
+ /* Section 4.2 in DP83840A.pdf (p43) */
+ /* and IEEE 802.3 "22.2.4.1.1 Reset" */
+ while (timeout-- &&
+ (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+ udelay(100);
+ }
for (i = 0; i < init_length; i++)
iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
+
+ ioread32(ioaddr + CSR15); /* flush posted writes */
} else {
u8 *init_sequence = p + 2;
u8 *reset_sequence = p + 3 + init_length;
OpenPOWER on IntegriCloud