tg3: Migrate tg3_flags to phy_flags

This patch moves most of the phy related flag definitions over to the
phyflags member and changes the code accordingly.

Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 18 insertions, 18 deletions

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5d684d2..4937bd1 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2774,7 +2774,6 @@ struct tg3 {
 #define TG3_FLAG_TXD_MBOX_HWBUG		0x00000002
 #define TG3_FLAG_RX_CHECKSUMS		0x00000004
 #define TG3_FLAG_USE_LINKCHG_REG	0x00000008
-#define TG3_FLAG_USE_MI_INTERRUPT	0x00000010
 #define TG3_FLAG_ENABLE_ASF		0x00000020
 #define TG3_FLAG_ASPM_WORKAROUND	0x00000040
 #define TG3_FLAG_POLL_SERDES		0x00000080
@@ -2796,7 +2795,6 @@ struct tg3 {
 #define TG3_FLAG_TX_RECOVERY_PENDING	0x00200000
 #define TG3_FLAG_WOL_CAP		0x00400000
 #define TG3_FLAG_JUMBO_RING_ENABLE	0x00800000
-#define TG3_FLAG_10_100_ONLY		0x01000000
 #define TG3_FLAG_PAUSE_AUTONEG		0x02000000
 #define TG3_FLAG_CPMU_PRESENT		0x04000000
 #define TG3_FLAG_40BIT_DMA_BUG		0x08000000
@@ -2807,22 +2805,15 @@ struct tg3 {
 	u32				tg3_flags2;
 #define TG3_FLG2_RESTART_TIMER		0x00000001
 #define TG3_FLG2_TSO_BUG		0x00000002
-#define TG3_FLG2_NO_ETH_WIRE_SPEED	0x00000004
 #define TG3_FLG2_IS_5788		0x00000008
 #define TG3_FLG2_MAX_RXPEND_64		0x00000010
 #define TG3_FLG2_TSO_CAPABLE		0x00000020
-#define TG3_FLG2_PHY_ADC_BUG		0x00000040
-#define TG3_FLG2_PHY_5704_A0_BUG	0x00000080
-#define TG3_FLG2_PHY_BER_BUG		0x00000100
 #define TG3_FLG2_PCI_EXPRESS		0x00000200
 #define TG3_FLG2_ASF_NEW_HANDSHAKE	0x00000400
 #define TG3_FLG2_HW_AUTONEG		0x00000800
 #define TG3_FLG2_IS_NIC			0x00001000
-#define TG3_FLG2_PHY_SERDES		0x00002000
-#define TG3_FLG2_CAPACITIVE_COUPLING	0x00004000
 #define TG3_FLG2_FLASH			0x00008000
 #define TG3_FLG2_HW_TSO_1		0x00010000
-#define TG3_FLG2_SERDES_PREEMPHASIS	0x00020000
 #define TG3_FLG2_5705_PLUS		0x00040000
 #define TG3_FLG2_5750_PLUS		0x00080000
 #define TG3_FLG2_HW_TSO_3		0x00100000
@@ -2830,10 +2821,6 @@ struct tg3 {
 #define TG3_FLG2_USING_MSIX		0x00400000
 #define TG3_FLG2_USING_MSI_OR_MSIX	(TG3_FLG2_USING_MSI | \
 					TG3_FLG2_USING_MSIX)
-#define TG3_FLG2_MII_SERDES		0x00800000
-#define TG3_FLG2_ANY_SERDES		(TG3_FLG2_PHY_SERDES |	\
-					TG3_FLG2_MII_SERDES)
-#define TG3_FLG2_PARALLEL_DETECT	0x01000000
 #define TG3_FLG2_ICH_WORKAROUND		0x02000000
 #define TG3_FLG2_5780_CLASS		0x04000000
 #define TG3_FLG2_HW_TSO_2		0x08000000
@@ -2841,9 +2828,7 @@ struct tg3 {
 					 TG3_FLG2_HW_TSO_2 | \
 					 TG3_FLG2_HW_TSO_3)
 #define TG3_FLG2_1SHOT_MSI		0x10000000
-#define TG3_FLG2_PHY_JITTER_BUG		0x20000000
 #define TG3_FLG2_NO_FWARE_REPORTED	0x40000000
-#define TG3_FLG2_PHY_ADJUST_TRIM	0x80000000
 	u32				tg3_flags3;
 #define TG3_FLG3_NO_NVRAM_ADDR_TRANS	0x00000001
 #define TG3_FLG3_ENABLE_APE		0x00000002
@@ -2851,15 +2836,12 @@ struct tg3 {
 #define TG3_FLG3_5701_DMA_BUG		0x00000008
 #define TG3_FLG3_USE_PHYLIB		0x00000010
 #define TG3_FLG3_MDIOBUS_INITED		0x00000020
-#define TG3_FLG3_PHY_CONNECTED		0x00000080
 #define TG3_FLG3_RGMII_INBAND_DISABLE	0x00000100
 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN	0x00000200
 #define TG3_FLG3_RGMII_EXT_IBND_TX_EN	0x00000400
 #define TG3_FLG3_CLKREQ_BUG		0x00000800
-#define TG3_FLG3_PHY_ENABLE_APD		0x00001000
 #define TG3_FLG3_5755_PLUS		0x00002000
 #define TG3_FLG3_NO_NVRAM		0x00004000
-#define TG3_FLG3_PHY_IS_FET		0x00010000
 #define TG3_FLG3_ENABLE_RSS		0x00020000
 #define TG3_FLG3_ENABLE_TSS		0x00040000
 #define TG3_FLG3_4G_DMA_BNDRY_BUG	0x00080000
@@ -2966,6 +2948,24 @@ struct tg3 {
 
 	u32				phy_flags;
 #define TG3_PHYFLG_IS_LOW_POWER		0x00000001
+#define TG3_PHYFLG_IS_CONNECTED		0x00000002
+#define TG3_PHYFLG_USE_MI_INTERRUPT	0x00000004
+#define TG3_PHYFLG_PHY_SERDES		0x00000010
+#define TG3_PHYFLG_MII_SERDES		0x00000020
+#define TG3_PHYFLG_ANY_SERDES		(TG3_PHYFLG_PHY_SERDES |	\
+					TG3_PHYFLG_MII_SERDES)
+#define TG3_PHYFLG_IS_FET		0x00000040
+#define TG3_PHYFLG_10_100_ONLY		0x00000080
+#define TG3_PHYFLG_ENABLE_APD		0x00000100
+#define TG3_PHYFLG_CAPACITIVE_COUPLING	0x00000200
+#define TG3_PHYFLG_NO_ETH_WIRE_SPEED	0x00000400
+#define TG3_PHYFLG_JITTER_BUG		0x00000800
+#define TG3_PHYFLG_ADJUST_TRIM		0x00001000
+#define TG3_PHYFLG_ADC_BUG		0x00002000
+#define TG3_PHYFLG_5704_A0_BUG		0x00004000
+#define TG3_PHYFLG_BER_BUG		0x00008000
+#define TG3_PHYFLG_SERDES_PREEMPHASIS	0x00010000
+#define TG3_PHYFLG_PARALLEL_DETECT	0x00020000
 
 	u32				led_ctrl;
 	u32				phy_otp;