summaryrefslogtreecommitdiffstats
path: root/drivers/net/sundance.c
diff options
context:
space:
mode:
authorPhilippe De Muyter <phdm@macqel.be>2005-10-28 12:23:47 +0200
committerJeff Garzik <jgarzik@pobox.com>2005-10-28 16:40:33 -0400
commitb71b95efa5abca33e1bfb85d55162c7f99f54c23 (patch)
treee6b22bf428cc83cd54f10e9ea6551c4cea09fdb8 /drivers/net/sundance.c
parent89358f90ab6f6657d386e77e19c805d7ab88694f (diff)
downloadop-kernel-dev-b71b95efa5abca33e1bfb85d55162c7f99f54c23.zip
op-kernel-dev-b71b95efa5abca33e1bfb85d55162c7f99f54c23.tar.gz
[PATCH] sundance: fix DFE-580TX Tx Underrun
Under heavy PCI bus load, ports of the DFE-580TX 4-ethernet port board stop working, with currently no other cure than a powercycle. Here is a tested fix. By the way, I also fixed some references and attribution. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/sundance.c')
-rw-r--r--drivers/net/sundance.c62
1 files changed, 48 insertions, 14 deletions
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 5de0554..0ab9c38 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -80,7 +80,7 @@
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
- Version LK1.08 (D-Link):
+ Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- Fix bug of custom mac address
(StationAddr register only accept word write)
@@ -91,11 +91,14 @@
Version LK1.09a (ICPlus):
- Add the delay time in reading the contents of EEPROM
+ Version LK1.10 (Philippe De Muyter phdm@macqel.be):
+ - Make 'unblock interface after Tx underrun' work
+
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.09a"
-#define DRV_RELDATE "10-Jul-2003"
+#define DRV_VERSION "1.01+LK1.10"
+#define DRV_RELDATE "28-Oct-2005"
/* The user-configurable values.
@@ -263,8 +266,10 @@ IV. Notes
IVb. References
The Sundance ST201 datasheet, preliminary version.
-http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
-http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+The Kendin KS8723 datasheet, preliminary version.
+The ICplus IP100 datasheet, preliminary version.
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
IVc. Errata
@@ -500,6 +505,25 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int netdev_close(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
+static void sundance_reset(struct net_device *dev, unsigned long reset_cmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base + ASICCtrl;
+ int countdown;
+
+ /* ST201 documentation states ASICCtrl is a 32bit register */
+ iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr);
+ /* ST201 documentation states reset can take up to 1 ms */
+ countdown = 10 + 1;
+ while (ioread32 (ioaddr) & (ResetBusy << 16)) {
+ if (--countdown == 0) {
+ printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
+ break;
+ }
+ udelay(100);
+ }
+}
+
static int __devinit sundance_probe1 (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1190,23 +1214,33 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs
("%s: Transmit status is %2.2x.\n",
dev->name, tx_status);
if (tx_status & 0x1e) {
+ if (netif_msg_tx_err(np))
+ printk("%s: Transmit error status %4.4x.\n",
+ dev->name, tx_status);
np->stats.tx_errors++;
if (tx_status & 0x10)
np->stats.tx_fifo_errors++;
if (tx_status & 0x08)
np->stats.collisions++;
+ if (tx_status & 0x04)
+ np->stats.tx_fifo_errors++;
if (tx_status & 0x02)
np->stats.tx_window_errors++;
- /* This reset has not been verified!. */
- if (tx_status & 0x10) { /* Reset the Tx. */
- np->stats.tx_fifo_errors++;
- spin_lock(&np->lock);
- reset_tx(dev);
- spin_unlock(&np->lock);
+ /*
+ ** This reset has been verified on
+ ** DFE-580TX boards ! phdm@macqel.be.
+ */
+ if (tx_status & 0x10) { /* TxUnderrun */
+ unsigned short txthreshold;
+
+ txthreshold = ioread16 (ioaddr + TxStartThresh);
+ /* Restart Tx FIFO and transmitter */
+ sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16);
+ iowrite16 (txthreshold, ioaddr + TxStartThresh);
+ /* No need to reset the Tx pointer here */
}
- if (tx_status & 0x1e) /* Restart the Tx. */
- iowrite16 (TxEnable,
- ioaddr + MACCtrl1);
+ /* Restart the Tx. */
+ iowrite16 (TxEnable, ioaddr + MACCtrl1);
}
/* Yup, this is a documentation bug. It cost me *hours*. */
iowrite16 (0, ioaddr + TxStatus);
OpenPOWER on IntegriCloud