summaryrefslogtreecommitdiffstats
path: root/drivers/net/sundance.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/sundance.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/sundance.c')
-rw-r--r--drivers/net/sundance.c1785
1 files changed, 1785 insertions, 0 deletions
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
new file mode 100644
index 0000000..08cb717
--- /dev/null
+++ b/drivers/net/sundance.c
@@ -0,0 +1,1785 @@
+/* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */
+/*
+ Written 1999-2000 by Donald Becker.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Support and updates available at
+ http://www.scyld.com/network/sundance.html
+
+
+ Version LK1.01a (jgarzik):
+ - Replace some MII-related magic numbers with constants
+
+ Version LK1.02 (D-Link):
+ - Add new board to PCI ID list
+ - Fix multicast bug
+
+ Version LK1.03 (D-Link):
+ - New Rx scheme, reduce Rx congestion
+ - Option to disable flow control
+
+ Version LK1.04 (D-Link):
+ - Tx timeout recovery
+ - More support for ethtool.
+
+ Version LK1.04a:
+ - Remove unused/constant members from struct pci_id_info
+ (which then allows removal of 'drv_flags' from private struct)
+ (jgarzik)
+ - If no phy is found, fail to load that board (jgarzik)
+ - Always start phy id scan at id 1 to avoid problems (Donald Becker)
+ - Autodetect where mii_preable_required is needed,
+ default to not needed. (Donald Becker)
+
+ Version LK1.04b:
+ - Remove mii_preamble_required module parameter (Donald Becker)
+ - Add per-interface mii_preamble_required (setting is autodetected)
+ (Donald Becker)
+ - Remove unnecessary cast from void pointer (jgarzik)
+ - Re-align comments in private struct (jgarzik)
+
+ Version LK1.04c (jgarzik):
+ - Support bitmapped message levels (NETIF_MSG_xxx), and the
+ two ethtool ioctls that get/set them
+ - Don't hand-code MII ethtool support, use standard API/lib
+
+ Version LK1.04d:
+ - Merge from Donald Becker's sundance.c: (Jason Lunz)
+ * proper support for variably-sized MTUs
+ * default to PIO, to fix chip bugs
+ - Add missing unregister_netdev (Jason Lunz)
+ - Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
+ - Better rx buf size calculation (Donald Becker)
+
+ Version LK1.05 (D-Link):
+ - Fix DFE-580TX packet drop issue (for DL10050C)
+ - Fix reset_tx logic
+
+ Version LK1.06 (D-Link):
+ - Fix crash while unloading driver
+
+ Versin LK1.06b (D-Link):
+ - New tx scheme, adaptive tx_coalesce
+
+ Version LK1.07 (D-Link):
+ - Fix tx bugs in big-endian machines
+ - Remove unused max_interrupt_work module parameter, the new
+ NAPI-like rx scheme doesn't need it.
+ - Remove redundancy get_stats() in intr_handler(), those
+ I/O access could affect performance in ARM-based system
+ - Add Linux software VLAN support
+
+ Version LK1.08 (D-Link):
+ - Fix bug of custom mac address
+ (StationAddr register only accept word write)
+
+ Version LK1.09 (D-Link):
+ - Fix the flowctrl bug.
+ - Set Pause bit in MII ANAR if flow control enabled.
+
+ Version LK1.09a (ICPlus):
+ - Add the delay time in reading the contents of EEPROM
+
+*/
+
+#define DRV_NAME "sundance"
+#define DRV_VERSION "1.01+LK1.09a"
+#define DRV_RELDATE "10-Jul-2003"
+
+
+/* The user-configurable values.
+ These may be modified when a driver module is loaded.*/
+static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+ Typical is a 64 element hash table based on the Ethernet CRC. */
+static int multicast_filter_limit = 32;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1518 effectively disables this feature.
+ This chip can receive into offset buffers, so the Alpha does not
+ need a copy-align. */
+static int rx_copybreak;
+static int flowctrl=1;
+
+/* media[] specifies the media type the NIC operates at.
+ autosense Autosensing active media.
+ 10mbps_hd 10Mbps half duplex.
+ 10mbps_fd 10Mbps full duplex.
+ 100mbps_hd 100Mbps half duplex.
+ 100mbps_fd 100Mbps full duplex.
+ 0 Autosensing active media.
+ 1 10Mbps half duplex.
+ 2 10Mbps full duplex.
+ 3 100Mbps half duplex.
+ 4 100Mbps full duplex.
+*/
+#define MAX_UNITS 8
+static char *media[MAX_UNITS];
+
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+ The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+ Making the Tx ring too large decreases the effectiveness of channel
+ bonding and packet priority, and more than 128 requires modifying the
+ Tx error recovery.
+ Large receive rings merely waste memory. */
+#define TX_RING_SIZE 32
+#define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used. */
+#define RX_RING_SIZE 64
+#define RX_BUDGET 32
+#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc)
+#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc)
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (4*HZ)
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
+
+/* Include files, designed to support most kernel versions 2.0.0 and later. */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#ifndef _COMPAT_WITH_OLD_KERNEL
+#include <linux/crc32.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#else
+#include "crc32.h"
+#include "ethtool.h"
+#include "mii.h"
+#include "compat.h"
+#endif
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n"
+KERN_INFO " http://www.scyld.com/network/sundance.html\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("Sundance Alta Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param_array(media, charp, NULL, 0);
+module_param(flowctrl, int, 0);
+MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)");
+MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]");
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for the Sundance Technologies "Alta" ST201 chip.
+
+II. Board-specific settings
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
+Some chips explicitly use only 2^N sized rings, while others use a
+'next descriptor' pointer that the driver forms into rings.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver uses a zero-copy receive and transmit scheme.
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack. Buffers consumed this way are replaced by newly allocated
+skbuffs in a later phase of receives.
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets. When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine. Copying also preloads the cache, which is
+most useful with small frames.
+
+A subtle aspect of the operation is that the IP header at offset 14 in an
+ethernet frame isn't longword aligned for further processing.
+Unaligned buffers are permitted by the Sundance hardware, so
+frames are received into the skbuff at an offset of "+2", 16-byte aligning
+the IP header.
+
+IIId. Synchronization
+
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag. The other thread is the interrupt handler, which is single
+threaded by the hardware and interrupt handling software.
+
+The send packet thread has partial control over the Tx ring and 'dev->tbusy'
+flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
+queue slot is empty, it clears the tbusy flag when finished otherwise it sets
+the 'lp->tx_full' flag.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. After reaping the stats, it marks the Tx queue entry as
+empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it
+clears both the tx_full and tbusy flags.
+
+IV. Notes
+
+IVb. References
+
+The Sundance ST201 datasheet, preliminary version.
+http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
+http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
+
+IVc. Errata
+
+*/
+
+/* Work-around for Kendin chip bugs. */
+#ifndef CONFIG_SUNDANCE_MMIO
+#define USE_IO_OPS 1
+#endif
+
+static struct pci_device_id sundance_pci_tbl[] = {
+ {0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0},
+ {0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1},
+ {0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2},
+ {0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3},
+ {0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
+ {0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, sundance_pci_tbl);
+
+enum {
+ netdev_io_size = 128
+};
+
+struct pci_id_info {
+ const char *name;
+};
+static struct pci_id_info pci_id_tbl[] = {
+ {"D-Link DFE-550TX FAST Ethernet Adapter"},
+ {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"},
+ {"D-Link DFE-580TX 4 port Server Adapter"},
+ {"D-Link DFE-530TXS FAST Ethernet Adapter"},
+ {"D-Link DL10050-based FAST Ethernet Adapter"},
+ {"Sundance Technology Alta"},
+ {NULL,}, /* 0 terminated list. */
+};
+
+/* This driver was written to use PCI memory space, however x86-oriented
+ hardware often uses I/O space accesses. */
+
+/* Offsets to the device registers.
+ Unlike software-only systems, device drivers interact with complex hardware.
+ It's not useful to define symbolic names for every register bit in the
+ device. The name can only partially document the semantics and make
+ the driver longer and more difficult to read.
+ In general, only the important configuration values or bits changed
+ multiple times should be defined symbolically.
+*/
+enum alta_offsets {
+ DMACtrl = 0x00,
+ TxListPtr = 0x04,
+ TxDMABurstThresh = 0x08,
+ TxDMAUrgentThresh = 0x09,
+ TxDMAPollPeriod = 0x0a,
+ RxDMAStatus = 0x0c,
+ RxListPtr = 0x10,
+ DebugCtrl0 = 0x1a,
+ DebugCtrl1 = 0x1c,
+ RxDMABurstThresh = 0x14,
+ RxDMAUrgentThresh = 0x15,
+ RxDMAPollPeriod = 0x16,
+ LEDCtrl = 0x1a,
+ ASICCtrl = 0x30,
+ EEData = 0x34,
+ EECtrl = 0x36,
+ TxStartThresh = 0x3c,
+ RxEarlyThresh = 0x3e,
+ FlashAddr = 0x40,
+ FlashData = 0x44,
+ TxStatus = 0x46,
+ TxFrameId = 0x47,
+ DownCounter = 0x18,
+ IntrClear = 0x4a,
+ IntrEnable = 0x4c,
+ IntrStatus = 0x4e,
+ MACCtrl0 = 0x50,
+ MACCtrl1 = 0x52,
+ StationAddr = 0x54,
+ MaxFrameSize = 0x5A,
+ RxMode = 0x5c,
+ MIICtrl = 0x5e,
+ MulticastFilter0 = 0x60,
+ MulticastFilter1 = 0x64,
+ RxOctetsLow = 0x68,
+ RxOctetsHigh = 0x6a,
+ TxOctetsLow = 0x6c,
+ TxOctetsHigh = 0x6e,
+ TxFramesOK = 0x70,
+ RxFramesOK = 0x72,
+ StatsCarrierError = 0x74,
+ StatsLateColl = 0x75,
+ StatsMultiColl = 0x76,
+ StatsOneColl = 0x77,
+ StatsTxDefer = 0x78,
+ RxMissed = 0x79,
+ StatsTxXSDefer = 0x7a,
+ StatsTxAbort = 0x7b,
+ StatsBcastTx = 0x7c,
+ StatsBcastRx = 0x7d,
+ StatsMcastTx = 0x7e,
+ StatsMcastRx = 0x7f,
+ /* Aliased and bogus values! */
+ RxStatus = 0x0c,
+};
+enum ASICCtrl_HiWord_bit {
+ GlobalReset = 0x0001,
+ RxReset = 0x0002,
+ TxReset = 0x0004,
+ DMAReset = 0x0008,
+ FIFOReset = 0x0010,
+ NetworkReset = 0x0020,
+ HostReset = 0x0040,
+ ResetBusy = 0x0400,
+};
+
+/* Bits in the interrupt status/mask registers. */
+enum intr_status_bits {
+ IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008,
+ IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020,
+ IntrDrvRqst=0x0040,
+ StatsMax=0x0080, LinkChange=0x0100,
+ IntrTxDMADone=0x0200, IntrRxDMADone=0x0400,
+};
+
+/* Bits in the RxMode register. */
+enum rx_mode_bits {
+ AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08,
+ AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01,
+};
+/* Bits in MACCtrl. */
+enum mac_ctrl0_bits {
+ EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40,
+ EnbFlowCtrl=0x100, EnbPassRxCRC=0x200,
+};
+enum mac_ctrl1_bits {
+ StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080,
+ TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400,
+ RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000,
+};
+
+/* The Rx and Tx buffer descriptors. */
+/* Note that using only 32 bit fields simplifies conversion to big-endian
+ architectures. */
+struct netdev_desc {
+ u32 next_desc;
+ u32 status;
+ struct desc_frag { u32 addr, length; } frag[1];
+};
+
+/* Bits in netdev_desc.status */
+enum desc_status_bits {
+ DescOwn=0x8000,
+ DescEndPacket=0x4000,
+ DescEndRing=0x2000,
+ LastFrag=0x80000000,
+ DescIntrOnTx=0x8000,
+ DescIntrOnDMADone=0x80000000,
+ DisableAlign = 0x00000001,
+};
+
+#define PRIV_ALIGN 15 /* Required alignment mask */
+/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment
+ within the structure. */
+#define MII_CNT 4
+struct netdev_private {
+ /* Descriptor rings first for alignment. */
+ struct netdev_desc *rx_ring;
+ struct netdev_desc *tx_ring;
+ struct sk_buff* rx_skbuff[RX_RING_SIZE];
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ dma_addr_t tx_ring_dma;
+ dma_addr_t rx_ring_dma;
+ struct net_device_stats stats;
+ struct timer_list timer; /* Media monitoring timer. */
+ /* Frequently used values: keep some adjacent for cache effect. */
+ spinlock_t lock;
+ spinlock_t rx_lock; /* Group with Tx control cache line. */
+ int msg_enable;
+ int chip_id;
+ unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
+ unsigned int rx_buf_sz; /* Based on MTU+slack. */
+ struct netdev_desc *last_tx; /* Last Tx descriptor used. */
+ unsigned int cur_tx, dirty_tx;
+ /* These values are keep track of the transceiver/media in use. */
+ unsigned int flowctrl:1;
+ unsigned int default_port:4; /* Last dev->if_port value. */
+ unsigned int an_enable:1;
+ unsigned int speed;
+ struct tasklet_struct rx_tasklet;
+ struct tasklet_struct tx_tasklet;
+ int budget;
+ int cur_task;
+ /* Multicast and receive mode. */
+ spinlock_t mcastlock; /* SMP lock multicast updates. */
+ u16 mcast_filter[4];
+ /* MII transceiver section. */
+ struct mii_if_info mii_if;
+ int mii_preamble_required;
+ unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */
+ struct pci_dev *pci_dev;
+ void __iomem *base;
+ unsigned char pci_rev_id;
+};
+
+/* The station address location in the EEPROM. */
+#define EEPROM_SA_OFFSET 0x10
+#define DEFAULT_INTR (IntrRxDMADone | IntrPCIErr | \
+ IntrDrvRqst | IntrTxDone | StatsMax | \
+ LinkChange)
+
+static int change_mtu(struct net_device *dev, int new_mtu);
+static int eeprom_read(void __iomem *ioaddr, int location);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int netdev_open(struct net_device *dev);
+static void check_duplex(struct net_device *dev);
+static void netdev_timer(unsigned long data);
+static void tx_timeout(struct net_device *dev);
+static void init_ring(struct net_device *dev);
+static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static int reset_tx (struct net_device *dev);
+static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
+static void rx_poll(unsigned long data);
+static void tx_poll(unsigned long data);
+static void refill_rx (struct net_device *dev);
+static void netdev_error(struct net_device *dev, int intr_status);
+static void netdev_error(struct net_device *dev, int intr_status);
+static void set_rx_mode(struct net_device *dev);
+static int __set_mac_addr(struct net_device *dev);
+static struct net_device_stats *get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int netdev_close(struct net_device *dev);
+static struct ethtool_ops ethtool_ops;
+
+static int __devinit sundance_probe1 (struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ struct netdev_private *np;
+ static int card_idx;
+ int chip_idx = ent->driver_data;
+ int irq;
+ int i;
+ void __iomem *ioaddr;
+ u16 mii_ctl;
+ void *ring_space;
+ dma_addr_t ring_dma;
+#ifdef USE_IO_OPS
+ int bar = 0;
+#else
+ int bar = 1;
+#endif
+
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(version);
+#endif
+
+ if (pci_enable_device(pdev))
+ return -EIO;
+ pci_set_master(pdev);
+
+ irq = pdev->irq;
+
+ dev = alloc_etherdev(sizeof(*np));
+ if (!dev)
+ return -ENOMEM;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ if (pci_request_regions(pdev, DRV_NAME))
+ goto err_out_netdev;
+
+ ioaddr = pci_iomap(pdev, bar, netdev_io_size);
+ if (!ioaddr)
+ goto err_out_res;
+
+ for (i = 0; i < 3; i++)
+ ((u16 *)dev->dev_addr)[i] =
+ le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET));
+
+ dev->base_addr = (unsigned long)ioaddr;
+ dev->irq = irq;
+
+ np = netdev_priv(dev);
+ np->base = ioaddr;
+ np->pci_dev = pdev;
+ np->chip_id = chip_idx;
+ np->msg_enable = (1 << debug) - 1;
+ spin_lock_init(&np->lock);
+ tasklet_init(&np->rx_tasklet, rx_poll, (unsigned long)dev);
+ tasklet_init(&np->tx_tasklet, tx_poll, (unsigned long)dev);
+
+ ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
+ if (!ring_space)
+ goto err_out_cleardev;
+ np->tx_ring = (struct netdev_desc *)ring_space;
+ np->tx_ring_dma = ring_dma;
+
+ ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
+ if (!ring_space)
+ goto err_out_unmap_tx;
+ np->rx_ring = (struct netdev_desc *)ring_space;
+ np->rx_ring_dma = ring_dma;
+
+ np->mii_if.dev = dev;
+ np->mii_if.mdio_read = mdio_read;
+ np->mii_if.mdio_write = mdio_write;
+ np->mii_if.phy_id_mask = 0x1f;
+ np->mii_if.reg_num_mask = 0x1f;
+
+ /* The chip-specific entries in the device structure. */
+ dev->open = &netdev_open;
+ dev->hard_start_xmit = &start_tx;
+ dev->stop = &netdev_close;
+ dev->get_stats = &get_stats;
+ dev->set_multicast_list = &set_rx_mode;
+ dev->do_ioctl = &netdev_ioctl;
+ SET_ETHTOOL_OPS(dev, &ethtool_ops);
+ dev->tx_timeout = &tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->change_mtu = &change_mtu;
+ pci_set_drvdata(pdev, dev);
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
+
+ i = register_netdev(dev);
+ if (i)
+ goto err_out_unmap_rx;
+
+ printk(KERN_INFO "%s: %s at %p, ",
+ dev->name, pci_id_tbl[chip_idx].name, ioaddr);
+ for (i = 0; i < 5; i++)
+ printk("%2.2x:", dev->dev_addr[i]);
+ printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
+
+ if (1) {
+ int phy, phy_idx = 0;
+ np->phys[0] = 1; /* Default setting */
+ np->mii_preamble_required++;
+ for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+ int mii_status = mdio_read(dev, phy, MII_BMSR);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ np->phys[phy_idx++] = phy;
+ np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+ if ((mii_status & 0x0040) == 0)
+ np->mii_preamble_required++;
+ printk(KERN_INFO "%s: MII PHY found at address %d, status "
+ "0x%4.4x advertising %4.4x.\n",
+ dev->name, phy, mii_status, np->mii_if.advertising);
+ }
+ }
+ np->mii_preamble_required--;
+
+ if (phy_idx == 0) {
+ printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
+ dev->name, ioread32(ioaddr + ASICCtrl));
+ goto err_out_unregister;
+ }
+
+ np->mii_if.phy_id = np->phys[0];
+ }
+
+ /* Parse override configuration */
+ np->an_enable = 1;
+ if (card_idx < MAX_UNITS) {
+ if (media[card_idx] != NULL) {
+ np->an_enable = 0;
+ if (strcmp (media[card_idx], "100mbps_fd") == 0 ||
+ strcmp (media[card_idx], "4") == 0) {
+ np->speed = 100;
+ np->mii_if.full_duplex = 1;
+ } else if (strcmp (media[card_idx], "100mbps_hd") == 0
+ || strcmp (media[card_idx], "3") == 0) {
+ np->speed = 100;
+ np->mii_if.full_duplex = 0;
+ } else if (strcmp (media[card_idx], "10mbps_fd") == 0 ||
+ strcmp (media[card_idx], "2") == 0) {
+ np->speed = 10;
+ np->mii_if.full_duplex = 1;
+ } else if (strcmp (media[card_idx], "10mbps_hd") == 0 ||
+ strcmp (media[card_idx], "1") == 0) {
+ np->speed = 10;
+ np->mii_if.full_duplex = 0;
+ } else {
+ np->an_enable = 1;
+ }
+ }
+ if (flowctrl == 1)
+ np->flowctrl = 1;
+ }
+
+ /* Fibre PHY? */
+ if (ioread32 (ioaddr + ASICCtrl) & 0x80) {
+ /* Default 100Mbps Full */
+ if (np->an_enable) {
+ np->speed = 100;
+ np->mii_if.full_duplex = 1;
+ np->an_enable = 0;
+ }
+ }
+ /* Reset PHY */
+ mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET);
+ mdelay (300);
+ /* If flow control enabled, we need to advertise it.*/
+ if (np->flowctrl)
+ mdio_write (dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising | 0x0400);
+ mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
+ /* Force media type */
+ if (!np->an_enable) {
+ mii_ctl = 0;
+ mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0;
+ mii_ctl |= (np->mii_if.full_duplex) ? BMCR_FULLDPLX : 0;
+ mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl);
+ printk (KERN_INFO "Override speed=%d, %s duplex\n",
+ np->speed, np->mii_if.full_duplex ? "Full" : "Half");
+
+ }
+
+ /* Perhaps move the reset here? */
+ /* Reset the chip to erase previous misconfiguration. */
+ if (netif_msg_hw(np))
+ printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
+ iowrite16(0x007f, ioaddr + ASICCtrl + 2);
+ if (netif_msg_hw(np))
+ printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
+
+ card_idx++;
+ return 0;
+
+err_out_unregister:
+ unregister_netdev(dev);
+err_out_unmap_rx:
+ pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
+err_out_unmap_tx:
+ pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
+err_out_cleardev:
+ pci_set_drvdata(pdev, NULL);
+ pci_iounmap(pdev, ioaddr);
+err_out_res:
+ pci_release_regions(pdev);
+err_out_netdev:
+ free_netdev (dev);
+ return -ENODEV;
+}
+
+static int change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */
+ return -EINVAL;
+ if (netif_running(dev))
+ return -EBUSY;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+#define eeprom_delay(ee_addr) ioread32(ee_addr)
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */
+static int __devinit eeprom_read(void __iomem *ioaddr, int location)
+{
+ int boguscnt = 10000; /* Typical 1900 ticks. */
+ iowrite16(0x0200 | (location & 0xff), ioaddr + EECtrl);
+ do {
+ eeprom_delay(ioaddr + EECtrl);
+ if (! (ioread16(ioaddr + EECtrl) & 0x8000)) {
+ return ioread16(ioaddr + EEData);
+ }
+ } while (--boguscnt > 0);
+ return 0;
+}
+
+/* MII transceiver control section.
+ Read and write the MII registers using software-generated serial
+ MDIO protocol. See the MII specifications or DP83840A data sheet
+ for details.
+
+ The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back 33Mhz PCI cycles. */
+#define mdio_delay() ioread8(mdio_addr)
+
+enum mii_reg_bits {
+ MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004,
+};
+#define MDIO_EnbIn (0)
+#define MDIO_WRITE0 (MDIO_EnbOutput)
+#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput)
+
+/* Generate the preamble required for initial synchronization and
+ a few older transceivers. */
+static void mdio_sync(void __iomem *mdio_addr)
+{
+ int bits = 32;
+
+ /* Establish sync by sending at least 32 logic ones. */
+ while (--bits >= 0) {
+ iowrite8(MDIO_WRITE1, mdio_addr);
+ mdio_delay();
+ iowrite8(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
+ mdio_delay();
+ }
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *mdio_addr = np->base + MIICtrl;
+ int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ int i, retval = 0;
+
+ if (np->mii_preamble_required)
+ mdio_sync(mdio_addr);
+
+ /* Shift the read command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+ iowrite8(dataval, mdio_addr);
+ mdio_delay();
+ iowrite8(dataval | MDIO_ShiftClk, mdio_addr);
+ mdio_delay();
+ }
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ iowrite8(MDIO_EnbIn, mdio_addr);
+ mdio_delay();
+ retval = (retval << 1) | ((ioread8(mdio_addr) & MDIO_Data) ? 1 : 0);
+ iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+ mdio_delay();
+ }
+ return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *mdio_addr = np->base + MIICtrl;
+ int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
+ int i;
+
+ if (np->mii_preamble_required)
+ mdio_sync(mdio_addr);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+ iowrite8(dataval, mdio_addr);
+ mdio_delay();
+ iowrite8(dataval | MDIO_ShiftClk, mdio_addr);
+ mdio_delay();
+ }
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ iowrite8(MDIO_EnbIn, mdio_addr);
+ mdio_delay();
+ iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+ mdio_delay();
+ }
+ return;
+}
+
+static int netdev_open(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ int i;
+
+ /* Do we need to reset the chip??? */
+
+ i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ if (i)
+ return i;
+
+ if (netif_msg_ifup(np))
+ printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
+ dev->name, dev->irq);
+ init_ring(dev);
+
+ iowrite32(np->rx_ring_dma, ioaddr + RxListPtr);
+ /* The Tx list pointer is written as packets are queued. */
+
+ /* Initialize other registers. */
+ __set_mac_addr(dev);
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+ iowrite16(dev->mtu + 18, ioaddr + MaxFrameSize);
+#else
+ iowrite16(dev->mtu + 14, ioaddr + MaxFrameSize);
+#endif
+ if (dev->mtu > 2047)
+ iowrite32(ioread32(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl);
+
+ /* Configure the PCI bus bursts and FIFO thresholds. */
+
+ if (dev->if_port == 0)
+ dev->if_port = np->default_port;
+
+ spin_lock_init(&np->mcastlock);
+
+ set_rx_mode(dev);
+ iowrite16(0, ioaddr + IntrEnable);
+ iowrite16(0, ioaddr + DownCounter);
+ /* Set the chip to poll every N*320nsec. */
+ iowrite8(100, ioaddr + RxDMAPollPeriod);
+ iowrite8(127, ioaddr + TxDMAPollPeriod);
+ /* Fix DFE-580TX packet drop issue */
+ if (np->pci_rev_id >= 0x14)
+ iowrite8(0x01, ioaddr + DebugCtrl1);
+ netif_start_queue(dev);
+
+ iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1);
+
+ if (netif_msg_ifup(np))
+ printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x "
+ "MAC Control %x, %4.4x %4.4x.\n",
+ dev->name, ioread32(ioaddr + RxStatus), ioread8(ioaddr + TxStatus),
+ ioread32(ioaddr + MACCtrl0),
+ ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0));
+
+ /* Set the timer to check for link beat. */
+ init_timer(&np->timer);
+ np->timer.expires = jiffies + 3*HZ;
+ np->timer.data = (unsigned long)dev;
+ np->timer.function = &netdev_timer; /* timer handler */
+ add_timer(&np->timer);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ iowrite16(DEFAULT_INTR, ioaddr + IntrEnable);
+
+ return 0;
+}
+
+static void check_duplex(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA);
+ int negotiated = mii_lpa & np->mii_if.advertising;
+ int duplex;
+
+ /* Force media */
+ if (!np->an_enable || mii_lpa == 0xffff) {
+ if (np->mii_if.full_duplex)
+ iowrite16 (ioread16 (ioaddr + MACCtrl0) | EnbFullDuplex,
+ ioaddr + MACCtrl0);
+ return;
+ }
+
+ /* Autonegotiation */
+ duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
+ if (np->mii_if.full_duplex != duplex) {
+ np->mii_if.full_duplex = duplex;
+ if (netif_msg_link(np))
+ printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d "
+ "negotiated capability %4.4x.\n", dev->name,
+ duplex ? "full" : "half", np->phys[0], negotiated);
+ iowrite16(ioread16(ioaddr + MACCtrl0) | duplex ? 0x20 : 0, ioaddr + MACCtrl0);
+ }
+}
+
+static void netdev_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ int next_tick = 10*HZ;
+
+ if (netif_msg_timer(np)) {
+ printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, "
+ "Tx %x Rx %x.\n",
+ dev->name, ioread16(ioaddr + IntrEnable),
+ ioread8(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
+ }
+ check_duplex(dev);
+ np->timer.expires = jiffies + next_tick;
+ add_timer(&np->timer);
+}
+
+static void tx_timeout(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ unsigned long flag;
+
+ netif_stop_queue(dev);
+ tasklet_disable(&np->tx_tasklet);
+ iowrite16(0, ioaddr + IntrEnable);
+ printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x "
+ "TxFrameId %2.2x,"
+ " resetting...\n", dev->name, ioread8(ioaddr + TxStatus),
+ ioread8(ioaddr + TxFrameId));
+
+ {
+ int i;
+ for (i=0; i<TX_RING_SIZE; i++) {
+ printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i,
+ (unsigned long long)(np->tx_ring_dma + i*sizeof(*np->tx_ring)),
+ le32_to_cpu(np->tx_ring[i].next_desc),
+ le32_to_cpu(np->tx_ring[i].status),
+ (le32_to_cpu(np->tx_ring[i].status) >> 2) & 0xff,
+ le32_to_cpu(np->tx_ring[i].frag[0].addr),
+ le32_to_cpu(np->tx_ring[i].frag[0].length));
+ }
+ printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n",
+ ioread32(np->base + TxListPtr),
+ netif_queue_stopped(dev));
+ printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n",
+ np->cur_tx, np->cur_tx % TX_RING_SIZE,
+ np->dirty_tx, np->dirty_tx % TX_RING_SIZE);
+ printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx);
+ printk(KERN_DEBUG "cur_task=%d\n", np->cur_task);
+ }
+ spin_lock_irqsave(&np->lock, flag);
+
+ /* Stop and restart the chip's Tx processes . */
+ reset_tx(dev);
+ spin_unlock_irqrestore(&np->lock, flag);
+
+ dev->if_port = 0;
+
+ dev->trans_start = jiffies;
+ np->stats.tx_errors++;
+ if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
+ netif_wake_queue(dev);
+ }
+ iowrite16(DEFAULT_INTR, ioaddr + IntrEnable);
+ tasklet_enable(&np->tx_tasklet);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void init_ring(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ int i;
+
+ np->cur_rx = np->cur_tx = 0;
+ np->dirty_rx = np->dirty_tx = 0;
+ np->cur_task = 0;
+
+ np->rx_buf_sz = (dev->mtu <= 1520 ? PKT_BUF_SZ : dev->mtu + 16);
+
+ /* Initialize all Rx descriptors. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ np->rx_ring[i].next_desc = cpu_to_le32(np->rx_ring_dma +
+ ((i+1)%RX_RING_SIZE)*sizeof(*np->rx_ring));
+ np->rx_ring[i].status = 0;
+ np->rx_ring[i].frag[0].length = 0;
+ np->rx_skbuff[i] = NULL;
+ }
+
+ /* Fill in the Rx buffers. Handle allocation failure gracefully. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+ np->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* 16 byte align the IP header. */
+ np->rx_ring[i].frag[0].addr = cpu_to_le32(
+ pci_map_single(np->pci_dev, skb->tail, np->rx_buf_sz,
+ PCI_DMA_FROMDEVICE));
+ np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag);
+ }
+ np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ np->tx_skbuff[i] = NULL;
+ np->tx_ring[i].status = 0;
+ }
+ return;
+}
+
+static void tx_poll (unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct netdev_private *np = netdev_priv(dev);
+ unsigned head = np->cur_task % TX_RING_SIZE;
+ struct netdev_desc *txdesc =
+ &np->tx_ring[(np->cur_tx - 1) % TX_RING_SIZE];
+
+ /* Chain the next pointer */
+ for (; np->cur_tx - np->cur_task > 0; np->cur_task++) {
+ int entry = np->cur_task % TX_RING_SIZE;
+ txdesc = &np->tx_ring[entry];
+ if (np->last_tx) {
+ np->last_tx->next_desc = cpu_to_le32(np->tx_ring_dma +
+ entry*sizeof(struct netdev_desc));
+ }
+ np->last_tx = txdesc;
+ }
+ /* Indicate the latest descriptor of tx ring */
+ txdesc->status |= cpu_to_le32(DescIntrOnTx);
+
+ if (ioread32 (np->base + TxListPtr) == 0)
+ iowrite32 (np->tx_ring_dma + head * sizeof(struct netdev_desc),
+ np->base + TxListPtr);
+ return;
+}
+
+static int
+start_tx (struct sk_buff *skb, struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ struct netdev_desc *txdesc;
+ unsigned entry;
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = np->cur_tx % TX_RING_SIZE;
+ np->tx_skbuff[entry] = skb;
+ txdesc = &np->tx_ring[entry];
+
+ txdesc->next_desc = 0;
+ txdesc->status = cpu_to_le32 ((entry << 2) | DisableAlign);
+ txdesc->frag[0].addr = cpu_to_le32 (pci_map_single (np->pci_dev, skb->data,
+ skb->len,
+ PCI_DMA_TODEVICE));
+ txdesc->frag[0].length = cpu_to_le32 (skb->len | LastFrag);
+
+ /* Increment cur_tx before tasklet_schedule() */
+ np->cur_tx++;
+ mb();
+ /* Schedule a tx_poll() task */
+ tasklet_schedule(&np->tx_tasklet);
+
+ /* On some architectures: explicitly flush cache lines here. */
+ if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1
+ && !netif_queue_stopped(dev)) {
+ /* do nothing */
+ } else {
+ netif_stop_queue (dev);
+ }
+ dev->trans_start = jiffies;
+ if (netif_msg_tx_queued(np)) {
+ printk (KERN_DEBUG
+ "%s: Transmit frame #%d queued in slot %d.\n",
+ dev->name, np->cur_tx, entry);
+ }
+ return 0;
+}
+
+/* Reset hardware tx and free all of tx buffers */
+static int
+reset_tx (struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ struct sk_buff *skb;
+ int i;
+ int irq = in_interrupt();
+
+ /* Reset tx logic, TxListPtr will be cleaned */
+ iowrite16 (TxDisable, ioaddr + MACCtrl1);
+ iowrite16 (TxReset | DMAReset | FIFOReset | NetworkReset,
+ ioaddr + ASICCtrl + 2);
+ for (i=50; i > 0; i--) {
+ if ((ioread16(ioaddr + ASICCtrl + 2) & ResetBusy) == 0)
+ break;
+ mdelay(1);
+ }
+ /* free all tx skbuff */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ skb = np->tx_skbuff[i];
+ if (skb) {
+ pci_unmap_single(np->pci_dev,
+ np->tx_ring[i].frag[0].addr, skb->len,
+ PCI_DMA_TODEVICE);
+ if (irq)
+ dev_kfree_skb_irq (skb);
+ else
+ dev_kfree_skb (skb);
+ np->tx_skbuff[i] = NULL;
+ np->stats.tx_dropped++;
+ }
+ }
+ np->cur_tx = np->dirty_tx = 0;
+ np->cur_task = 0;
+ iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1);
+ return 0;
+}
+
+/* The interrupt handler cleans up after the Tx thread,
+ and schedule a Rx thread work */
+static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
+{
+ struct net_device *dev = (struct net_device *)dev_instance;
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ int hw_frame_id;
+ int tx_cnt;
+ int tx_status;
+ int handled = 0;
+
+
+ do {
+ int intr_status = ioread16(ioaddr + IntrStatus);
+ iowrite16(intr_status, ioaddr + IntrStatus);
+
+ if (netif_msg_intr(np))
+ printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
+ dev->name, intr_status);
+
+ if (!(intr_status & DEFAULT_INTR))
+ break;
+
+ handled = 1;
+
+ if (intr_status & (IntrRxDMADone)) {
+ iowrite16(DEFAULT_INTR & ~(IntrRxDone|IntrRxDMADone),
+ ioaddr + IntrEnable);
+ if (np->budget < 0)
+ np->budget = RX_BUDGET;
+ tasklet_schedule(&np->rx_tasklet);
+ }
+ if (intr_status & (IntrTxDone | IntrDrvRqst)) {
+ tx_status = ioread16 (ioaddr + TxStatus);
+ for (tx_cnt=32; tx_status & 0x80; --tx_cnt) {
+ if (netif_msg_tx_done(np))
+ printk
+ ("%s: Transmit status is %2.2x.\n",
+ dev->name, tx_status);
+ if (tx_status & 0x1e) {
+ np->stats.tx_errors++;
+ if (tx_status & 0x10)
+ np->stats.tx_fifo_errors++;
+ if (tx_status & 0x08)
+ np->stats.collisions++;
+ if (tx_status & 0x02)
+ np->stats.tx_window_errors++;
+ /* This reset has not been verified!. */
+ if (tx_status & 0x10) { /* Reset the Tx. */
+ np->stats.tx_fifo_errors++;
+ spin_lock(&np->lock);
+ reset_tx(dev);
+ spin_unlock(&np->lock);
+ }
+ if (tx_status & 0x1e) /* Restart the Tx. */
+ iowrite16 (TxEnable,
+ ioaddr + MACCtrl1);
+ }
+ /* Yup, this is a documentation bug. It cost me *hours*. */
+ iowrite16 (0, ioaddr + TxStatus);
+ if (tx_cnt < 0) {
+ iowrite32(5000, ioaddr + DownCounter);
+ break;
+ }
+ tx_status = ioread16 (ioaddr + TxStatus);
+ }
+ hw_frame_id = (tx_status >> 8) & 0xff;
+ } else {
+ hw_frame_id = ioread8(ioaddr + TxFrameId);
+ }
+
+ if (np->pci_rev_id >= 0x14) {
+ spin_lock(&np->lock);
+ for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+ int entry = np->dirty_tx % TX_RING_SIZE;
+ struct sk_buff *skb;
+ int sw_frame_id;
+ sw_frame_id = (le32_to_cpu(
+ np->tx_ring[entry].status) >> 2) & 0xff;
+ if (sw_frame_id == hw_frame_id &&
+ !(le32_to_cpu(np->tx_ring[entry].status)
+ & 0x00010000))
+ break;
+ if (sw_frame_id == (hw_frame_id + 1) %
+ TX_RING_SIZE)
+ break;
+ skb = np->tx_skbuff[entry];
+ /* Free the original skb. */
+ pci_unmap_single(np->pci_dev,
+ np->tx_ring[entry].frag[0].addr,
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq (np->tx_skbuff[entry]);
+ np->tx_skbuff[entry] = NULL;
+ np->tx_ring[entry].frag[0].addr = 0;
+ np->tx_ring[entry].frag[0].length = 0;
+ }
+ spin_unlock(&np->lock);
+ } else {
+ spin_lock(&np->lock);
+ for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+ int entry = np->dirty_tx % TX_RING_SIZE;
+ struct sk_buff *skb;
+ if (!(le32_to_cpu(np->tx_ring[entry].status)
+ & 0x00010000))
+ break;
+ skb = np->tx_skbuff[entry];
+ /* Free the original skb. */
+ pci_unmap_single(np->pci_dev,
+ np->tx_ring[entry].frag[0].addr,
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq (np->tx_skbuff[entry]);
+ np->tx_skbuff[entry] = NULL;
+ np->tx_ring[entry].frag[0].addr = 0;
+ np->tx_ring[entry].frag[0].length = 0;
+ }
+ spin_unlock(&np->lock);
+ }
+
+ if (netif_queue_stopped(dev) &&
+ np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
+ /* The ring is no longer full, clear busy flag. */
+ netif_wake_queue (dev);
+ }
+ /* Abnormal error summary/uncommon events handlers. */
+ if (intr_status & (IntrPCIErr | LinkChange | StatsMax))
+ netdev_error(dev, intr_status);
+ } while (0);
+ if (netif_msg_intr(np))
+ printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
+ dev->name, ioread16(ioaddr + IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+static void rx_poll(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct netdev_private *np = netdev_priv(dev);
+ int entry = np->cur_rx % RX_RING_SIZE;
+ int boguscnt = np->budget;
+ void __iomem *ioaddr = np->base;
+ int received = 0;
+
+ /* If EOP is set on the next entry, it's a new packet. Send it up. */
+ while (1) {
+ struct netdev_desc *desc = &(np->rx_ring[entry]);
+ u32 frame_status = le32_to_cpu(desc->status);
+ int pkt_len;
+
+ if (--boguscnt < 0) {
+ goto not_done;
+ }
+ if (!(frame_status & DescOwn))
+ break;
+ pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */
+ if (netif_msg_rx_status(np))
+ printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n",
+ frame_status);
+ if (frame_status & 0x001f4000) {
+ /* There was a error. */
+ if (netif_msg_rx_err(np))
+ printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n",
+ frame_status);
+ np->stats.rx_errors++;
+ if (frame_status & 0x00100000) np->stats.rx_length_errors++;
+ if (frame_status & 0x00010000) np->stats.rx_fifo_errors++;
+ if (frame_status & 0x00060000) np->stats.rx_frame_errors++;
+ if (frame_status & 0x00080000) np->stats.rx_crc_errors++;
+ if (frame_status & 0x00100000) {
+ printk(KERN_WARNING "%s: Oversized Ethernet frame,"
+ " status %8.8x.\n",
+ dev->name, frame_status);
+ }
+ } else {
+ struct sk_buff *skb;
+#ifndef final_version
+ if (netif_msg_rx_status(np))
+ printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
+ ", bogus_cnt %d.\n",
+ pkt_len, boguscnt);
+#endif
+ /* Check if the packet is long enough to accept without copying
+ to a minimally-sized skbuff. */
+ if (pkt_len < rx_copybreak
+ && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte align the IP header */
+ pci_dma_sync_single_for_cpu(np->pci_dev,
+ desc->frag[0].addr,
+ np->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0);
+ pci_dma_sync_single_for_device(np->pci_dev,
+ desc->frag[0].addr,
+ np->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb, pkt_len);
+ } else {
+ pci_unmap_single(np->pci_dev,
+ desc->frag[0].addr,
+ np->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb = np->rx_skbuff[entry], pkt_len);
+ np->rx_skbuff[entry] = NULL;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ /* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ }
+ entry = (entry + 1) % RX_RING_SIZE;
+ received++;
+ }
+ np->cur_rx = entry;
+ refill_rx (dev);
+ np->budget -= received;
+ iowrite16(DEFAULT_INTR, ioaddr + IntrEnable);
+ return;
+
+not_done:
+ np->cur_rx = entry;
+ refill_rx (dev);
+ if (!received)
+ received = 1;
+ np->budget -= received;
+ if (np->budget <= 0)
+ np->budget = RX_BUDGET;
+ tasklet_schedule(&np->rx_tasklet);
+ return;
+}
+
+static void refill_rx (struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ int entry;
+ int cnt = 0;
+
+ /* Refill the Rx ring buffers. */
+ for (;(np->cur_rx - np->dirty_rx + RX_RING_SIZE) % RX_RING_SIZE > 0;
+ np->dirty_rx = (np->dirty_rx + 1) % RX_RING_SIZE) {
+ struct sk_buff *skb;
+ entry = np->dirty_rx % RX_RING_SIZE;
+ if (np->rx_skbuff[entry] == NULL) {
+ skb = dev_alloc_skb(np->rx_buf_sz);
+ np->rx_skbuff[entry] = skb;
+ if (skb == NULL)
+ break; /* Better luck next round. */
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ np->rx_ring[entry].frag[0].addr = cpu_to_le32(
+ pci_map_single(np->pci_dev, skb->tail,
+ np->rx_buf_sz, PCI_DMA_FROMDEVICE));
+ }
+ /* Perhaps we need not reset this field. */
+ np->rx_ring[entry].frag[0].length =
+ cpu_to_le32(np->rx_buf_sz | LastFrag);
+ np->rx_ring[entry].status = 0;
+ cnt++;
+ }
+ return;
+}
+static void netdev_error(struct net_device *dev, int intr_status)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ u16 mii_ctl, mii_advertise, mii_lpa;
+ int speed;
+
+ if (intr_status & LinkChange) {
+ if (np->an_enable) {
+ mii_advertise = mdio_read (dev, np->phys[0], MII_ADVERTISE);
+ mii_lpa= mdio_read (dev, np->phys[0], MII_LPA);
+ mii_advertise &= mii_lpa;
+ printk (KERN_INFO "%s: Link changed: ", dev->name);
+ if (mii_advertise & ADVERTISE_100FULL) {
+ np->speed = 100;
+ printk ("100Mbps, full duplex\n");
+ } else if (mii_advertise & ADVERTISE_100HALF) {
+ np->speed = 100;
+ printk ("100Mbps, half duplex\n");
+ } else if (mii_advertise & ADVERTISE_10FULL) {
+ np->speed = 10;
+ printk ("10Mbps, full duplex\n");
+ } else if (mii_advertise & ADVERTISE_10HALF) {
+ np->speed = 10;
+ printk ("10Mbps, half duplex\n");
+ } else
+ printk ("\n");
+
+ } else {
+ mii_ctl = mdio_read (dev, np->phys[0], MII_BMCR);
+ speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10;
+ np->speed = speed;
+ printk (KERN_INFO "%s: Link changed: %dMbps ,",
+ dev->name, speed);
+ printk ("%s duplex.\n", (mii_ctl & BMCR_FULLDPLX) ?
+ "full" : "half");
+ }
+ check_duplex (dev);
+ if (np->flowctrl && np->mii_if.full_duplex) {
+ iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200,
+ ioaddr + MulticastFilter1+2);
+ iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl,
+ ioaddr + MACCtrl0);
+ }
+ }
+ if (intr_status & StatsMax) {
+ get_stats(dev);
+ }
+ if (intr_status & IntrPCIErr) {
+ printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
+ dev->name, intr_status);
+ /* We must do a global reset of DMA to continue. */
+ }
+}
+
+static struct net_device_stats *get_stats(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ int i;
+
+ /* We should lock this segment of code for SMP eventually, although
+ the vulnerability window is very small and statistics are
+ non-critical. */
+ /* The chip only need report frame silently dropped. */
+ np->stats.rx_missed_errors += ioread8(ioaddr + RxMissed);
+ np->stats.tx_packets += ioread16(ioaddr + TxFramesOK);
+ np->stats.rx_packets += ioread16(ioaddr + RxFramesOK);
+ np->stats.collisions += ioread8(ioaddr + StatsLateColl);
+ np->stats.collisions += ioread8(ioaddr + StatsMultiColl);
+ np->stats.collisions += ioread8(ioaddr + StatsOneColl);
+ np->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError);
+ ioread8(ioaddr + StatsTxDefer);
+ for (i = StatsTxDefer; i <= StatsMcastRx; i++)
+ ioread8(ioaddr + i);
+ np->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow);
+ np->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16;
+ np->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow);
+ np->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16;
+
+ return &np->stats;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ u16 mc_filter[4]; /* Multicast hash filter */
+ u32 rx_mode;
+ int i;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ /* Unconditionally log net taps. */
+ printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys;
+ } else if ((dev->mc_count > multicast_filter_limit)
+ || (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to match, or accept all multicasts. */
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ } else if (dev->mc_count) {
+ struct dev_mc_list *mclist;
+ int bit;
+ int index;
+ int crc;
+ memset (mc_filter, 0, sizeof (mc_filter));
+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+ i++, mclist = mclist->next) {
+ crc = ether_crc_le (ETH_ALEN, mclist->dmi_addr);
+ for (index=0, bit=0; bit < 6; bit++, crc <<= 1)
+ if (crc & 0x80000000) index |= 1 << bit;
+ mc_filter[index/16] |= (1 << (index % 16));
+ }
+ rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys;
+ } else {
+ iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode);
+ return;
+ }
+ if (np->mii_if.full_duplex && np->flowctrl)
+ mc_filter[3] |= 0x0200;
+
+ for (i = 0; i < 4; i++)
+ iowrite16(mc_filter[i], ioaddr + MulticastFilter0 + i*2);
+ iowrite8(rx_mode, ioaddr + RxMode);
+}
+
+static int __set_mac_addr(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ u16 addr16;
+
+ addr16 = (dev->dev_addr[0] | (dev->dev_addr[1] << 8));
+ iowrite16(addr16, np->base + StationAddr);
+ addr16 = (dev->dev_addr[2] | (dev->dev_addr[3] << 8));
+ iowrite16(addr16, np->base + StationAddr+2);
+ addr16 = (dev->dev_addr[4] | (dev->dev_addr[5] << 8));
+ iowrite16(addr16, np->base + StationAddr+4);
+ return 0;
+}
+
+static int check_if_running(struct net_device *dev)
+{
+ if (!netif_running(dev))
+ return -EINVAL;
+ return 0;
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(np->pci_dev));
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ spin_lock_irq(&np->lock);
+ mii_ethtool_gset(&np->mii_if, ecmd);
+ spin_unlock_irq(&np->lock);
+ return 0;
+}
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ int res;
+ spin_lock_irq(&np->lock);
+ res = mii_ethtool_sset(&np->mii_if, ecmd);
+ spin_unlock_irq(&np->lock);
+ return res;
+}
+
+static int nway_reset(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ return mii_nway_restart(&np->mii_if);
+}
+
+static u32 get_link(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ return mii_link_ok(&np->mii_if);
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ return np->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ np->msg_enable = val;
+}
+
+static struct ethtool_ops ethtool_ops = {
+ .begin = check_if_running,
+ .get_drvinfo = get_drvinfo,
+ .get_settings = get_settings,
+ .set_settings = set_settings,
+ .nway_reset = nway_reset,
+ .get_link = get_link,
+ .get_msglevel = get_msglevel,
+ .set_msglevel = set_msglevel,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ int rc;
+ int i;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&np->lock);
+ rc = generic_mii_ioctl(&np->mii_if, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&np->lock);
+ switch (cmd) {
+ case SIOCDEVPRIVATE:
+ for (i=0; i<TX_RING_SIZE; i++) {
+ printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i,
+ (unsigned long long)(np->tx_ring_dma + i*sizeof(*np->tx_ring)),
+ le32_to_cpu(np->tx_ring[i].next_desc),
+ le32_to_cpu(np->tx_ring[i].status),
+ (le32_to_cpu(np->tx_ring[i].status) >> 2)
+ & 0xff,
+ le32_to_cpu(np->tx_ring[i].frag[0].addr),
+ le32_to_cpu(np->tx_ring[i].frag[0].length));
+ }
+ printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n",
+ ioread32(np->base + TxListPtr),
+ netif_queue_stopped(dev));
+ printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n",
+ np->cur_tx, np->cur_tx % TX_RING_SIZE,
+ np->dirty_tx, np->dirty_tx % TX_RING_SIZE);
+ printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx);
+ printk(KERN_DEBUG "cur_task=%d\n", np->cur_task);
+ printk(KERN_DEBUG "TxStatus=%04x\n", ioread16(ioaddr + TxStatus));
+ return 0;
+ }
+
+
+ return rc;
+}
+
+static int netdev_close(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->base;
+ struct sk_buff *skb;
+ int i;
+
+ netif_stop_queue(dev);
+
+ if (netif_msg_ifdown(np)) {
+ printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x "
+ "Rx %4.4x Int %2.2x.\n",
+ dev->name, ioread8(ioaddr + TxStatus),
+ ioread32(ioaddr + RxStatus), ioread16(ioaddr + IntrStatus));
+ printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
+ dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx);
+ }
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ iowrite16(0x0000, ioaddr + IntrEnable);
+
+ /* Stop the chip's Tx and Rx processes. */
+ iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
+
+ /* Wait and kill tasklet */
+ tasklet_kill(&np->rx_tasklet);
+ tasklet_kill(&np->tx_tasklet);
+
+#ifdef __i386__
+ if (netif_msg_hw(np)) {
+ printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
+ (int)(np->tx_ring_dma));
+ for (i = 0; i < TX_RING_SIZE; i++)
+ printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+ i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
+ np->tx_ring[i].frag[0].length);
+ printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
+ (int)(np->rx_ring_dma));
+ for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
+ printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
+ i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr,
+ np->rx_ring[i].frag[0].length);
+ }
+ }
+#endif /* __i386__ debugging only */
+
+ free_irq(dev->irq, dev);
+
+ del_timer_sync(&np->timer);
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ np->rx_ring[i].status = 0;
+ np->rx_ring[i].frag[0].addr = 0xBADF00D0; /* An invalid address. */
+ skb = np->rx_skbuff[i];
+ if (skb) {
+ pci_unmap_single(np->pci_dev,
+ np->rx_ring[i].frag[0].addr, np->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(skb);
+ np->rx_skbuff[i] = NULL;
+ }
+ }
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ skb = np->tx_skbuff[i];
+ if (skb) {
+ pci_unmap_single(np->pci_dev,
+ np->tx_ring[i].frag[0].addr, skb->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb(skb);
+ np->tx_skbuff[i] = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static void __devexit sundance_remove1 (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev) {
+ struct netdev_private *np = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring,
+ np->rx_ring_dma);
+ pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring,
+ np->tx_ring_dma);
+ pci_iounmap(pdev, np->base);
+ pci_release_regions(pdev);
+ free_netdev(dev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+static struct pci_driver sundance_driver = {
+ .name = DRV_NAME,
+ .id_table = sundance_pci_tbl,
+ .probe = sundance_probe1,
+ .remove = __devexit_p(sundance_remove1),
+};
+
+static int __init sundance_init(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ printk(version);
+#endif
+ return pci_module_init(&sundance_driver);
+}
+
+static void __exit sundance_exit(void)
+{
+ pci_unregister_driver(&sundance_driver);
+}
+
+module_init(sundance_init);
+module_exit(sundance_exit);
+
+
OpenPOWER on IntegriCloud