summaryrefslogtreecommitdiffstats
path: root/drivers/net/skge.c
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@linux-foundation.org>2007-02-02 08:22:53 -0800
committerJeff Garzik <jeff@garzik.org>2007-02-06 19:07:44 -0500
commita504e64ab42bcc27074ea37405d06833ed6e0820 (patch)
treeb7c9b772969bd72a2f3f1636943db18718fc41b9 /drivers/net/skge.c
parent1479d13cb5304c452e6d7398c7771974c1014846 (diff)
downloadop-kernel-dev-a504e64ab42bcc27074ea37405d06833ed6e0820.zip
op-kernel-dev-a504e64ab42bcc27074ea37405d06833ed6e0820.tar.gz
skge: WOL support
Add WOL support for Yukon chipsets in skge device. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/skge.c')
-rw-r--r--drivers/net/skge.c158
1 files changed, 123 insertions, 35 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 9135602..7e687ca 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -132,18 +132,93 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs,
}
/* Wake on Lan only supported on Yukon chips with rev 1 or above */
-static int wol_supported(const struct skge_hw *hw)
+static u32 wol_supported(const struct skge_hw *hw)
{
- return !((hw->chip_id == CHIP_ID_GENESIS ||
- (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)));
+ if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev != 0)
+ return WAKE_MAGIC | WAKE_PHY;
+ else
+ return 0;
+}
+
+static u32 pci_wake_enabled(struct pci_dev *dev)
+{
+ int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ u16 value;
+
+ /* If device doesn't support PM Capabilities, but request is to disable
+ * wake events, it's a nop; otherwise fail */
+ if (!pm)
+ return 0;
+
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
+
+ value &= PCI_PM_CAP_PME_MASK;
+ value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+
+ return value != 0;
+}
+
+static void skge_wol_init(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ enum pause_control save_mode;
+ u32 ctrl;
+
+ /* Bring hardware out of reset */
+ skge_write16(hw, B0_CTST, CS_RST_CLR);
+ skge_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ skge_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+ skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100 skge_reset will re-enable on resume */
+ save_mode = skge->flow_control;
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+
+ ctrl = skge->advertising;
+ skge->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+
+ skge_phy_reset(skge);
+
+ skge->flow_control = save_mode;
+ skge->advertising = ctrl;
+
+ /* Set GMAC to no flow control and auto update for speed/duplex */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+ GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+ /* Set WOL address */
+ memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+ skge->netdev->dev_addr, ETH_ALEN);
+
+ /* Turn on appropriate WOL control bits */
+ skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+ ctrl = 0;
+ if (skge->wol & WAKE_PHY)
+ ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+ if (skge->wol & WAKE_MAGIC)
+ ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+ ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+ skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+ /* block receiver */
+ skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
}
static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct skge_port *skge = netdev_priv(dev);
- wol->supported = wol_supported(skge->hw) ? WAKE_MAGIC : 0;
- wol->wolopts = skge->wol ? WAKE_MAGIC : 0;
+ wol->supported = wol_supported(skge->hw);
+ wol->wolopts = skge->wol;
}
static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
@@ -151,23 +226,12 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
- return -EOPNOTSUPP;
-
- if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw))
+ if (wol->wolopts & wol_supported(hw))
return -EOPNOTSUPP;
- skge->wol = wol->wolopts == WAKE_MAGIC;
-
- if (skge->wol) {
- memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN);
-
- skge_write16(hw, WOL_CTRL_STAT,
- WOL_CTL_ENA_PME_ON_MAGIC_PKT |
- WOL_CTL_ENA_MAGIC_PKT_UNIT);
- } else
- skge_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT);
-
+ skge->wol = wol->wolopts;
+ if (!netif_running(dev))
+ skge_wol_init(skge);
return 0;
}
@@ -3456,6 +3520,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
skge->duplex = -1;
skge->speed = -1;
skge->advertising = skge_supported_modes(hw);
+ skge->wol = pci_wake_enabled(hw->pdev) ? wol_supported(hw) : 0;
hw->dev[port] = dev;
@@ -3654,28 +3719,46 @@ static void __devexit skge_remove(struct pci_dev *pdev)
}
#ifdef CONFIG_PM
+static int vaux_avail(struct pci_dev *pdev)
+{
+ int pm_cap;
+
+ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pm_cap) {
+ u16 ctl;
+ pci_read_config_word(pdev, pm_cap + PCI_PM_PMC, &ctl);
+ if (ctl & PCI_PM_CAP_AUX_POWER)
+ return 1;
+ }
+ return 0;
+}
+
+
static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, wol = 0;
+ int i, err, wol = 0;
+
+ err = pci_save_state(pdev);
+ if (err)
+ return err;
- pci_save_state(pdev);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+ struct skge_port *skge = netdev_priv(dev);
- if (netif_running(dev)) {
- struct skge_port *skge = netdev_priv(dev);
+ if (netif_running(dev))
+ skge_down(dev);
+ if (skge->wol)
+ skge_wol_init(skge);
- netif_carrier_off(dev);
- if (skge->wol)
- netif_stop_queue(dev);
- else
- skge_down(dev);
- wol |= skge->wol;
- }
- netif_device_detach(dev);
+ wol |= skge->wol;
}
+ if (wol && vaux_avail(pdev))
+ skge_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
+
skge_write32(hw, B0_IMSK, 0);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -3688,8 +3771,14 @@ static int skge_resume(struct pci_dev *pdev)
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err)
+ goto out;
+
+ err = pci_restore_state(pdev);
+ if (err)
+ goto out;
+
pci_enable_wake(pdev, PCI_D0, 0);
err = skge_reset(hw);
@@ -3699,7 +3788,6 @@ static int skge_resume(struct pci_dev *pdev)
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
- netif_device_attach(dev);
if (netif_running(dev)) {
err = skge_up(dev);
OpenPOWER on IntegriCloud