summaryrefslogtreecommitdiffstats
path: root/drivers/net/skge.c
diff options
context:
space:
mode:
authorstephen hemminger <shemminger@vyatta.com>2010-12-30 08:52:29 +0000
committerDavid S. Miller <davem@davemloft.net>2010-12-31 12:50:18 -0800
commit7dbf6acdbad2fbc6eea72b58404461dcb7c6d9d2 (patch)
treed140d77e379168f41287935de5f9825a30016dae /drivers/net/skge.c
parent18c8d82ae5b802c5d82e0dfbcc08b1b568955f46 (diff)
downloadop-kernel-dev-7dbf6acdbad2fbc6eea72b58404461dcb7c6d9d2.zip
op-kernel-dev-7dbf6acdbad2fbc6eea72b58404461dcb7c6d9d2.tar.gz
skge: Do not use legacy PCI power management
The skge driver used the legacy PCI power management, and did its own PCI callbacks. Use the same code model as Rafael's changes to sky2. Let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Compile tested only (so far). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/skge.c')
-rw-r--r--drivers/net/skge.c46
1 files changed, 16 insertions, 30 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index c149e48..42daf98 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -4042,53 +4042,40 @@ static void __devexit skge_remove(struct pci_dev *pdev)
}
#ifdef CONFIG_PM
-static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+static int skge_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, err, wol = 0;
+ int i;
if (!hw)
return 0;
- err = pci_save_state(pdev);
- if (err)
- return err;
-
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct skge_port *skge = netdev_priv(dev);
if (netif_running(dev))
skge_down(dev);
+
if (skge->wol)
skge_wol_init(skge);
-
- wol |= skge->wol;
}
skge_write32(hw, B0_IMSK, 0);
- pci_prepare_to_sleep(pdev);
-
return 0;
}
-static int skge_resume(struct pci_dev *pdev)
+static int skge_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
if (!hw)
return 0;
- err = pci_back_from_sleep(pdev);
- if (err)
- goto out;
-
- err = pci_restore_state(pdev);
- if (err)
- goto out;
-
err = skge_reset(hw);
if (err)
goto out;
@@ -4109,12 +4096,19 @@ static int skge_resume(struct pci_dev *pdev)
out:
return err;
}
+
+static SIMPLE_DEV_PM_OPS(skge_pm_ops, skge_suspend, skge_resume);
+#define SKGE_PM_OPS (&skge_pm_ops)
+
+#else
+
+#define SKGE_PM_OPS NULL
#endif
static void skge_shutdown(struct pci_dev *pdev)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, wol = 0;
+ int i;
if (!hw)
return;
@@ -4125,15 +4119,10 @@ static void skge_shutdown(struct pci_dev *pdev)
if (skge->wol)
skge_wol_init(skge);
- wol |= skge->wol;
}
- if (pci_enable_wake(pdev, PCI_D3cold, wol))
- pci_enable_wake(pdev, PCI_D3hot, wol);
-
- pci_disable_device(pdev);
+ pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
pci_set_power_state(pdev, PCI_D3hot);
-
}
static struct pci_driver skge_driver = {
@@ -4141,11 +4130,8 @@ static struct pci_driver skge_driver = {
.id_table = skge_id_table,
.probe = skge_probe,
.remove = __devexit_p(skge_remove),
-#ifdef CONFIG_PM
- .suspend = skge_suspend,
- .resume = skge_resume,
-#endif
.shutdown = skge_shutdown,
+ .driver.pm = SKGE_PM_OPS,
};
static struct dmi_system_id skge_32bit_dma_boards[] = {
OpenPOWER on IntegriCloud