Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 172 insertions, 0 deletions

diff --git a/drivers/net/sk_mca.h b/drivers/net/sk_mca.h
new file mode 100644
index 0000000..7e7c995
--- /dev/null
+++ b/drivers/net/sk_mca.h
@@ -0,0 +1,172 @@
+#include <linux/version.h>
+
+#ifndef _SK_MCA_INCLUDE_
+#define _SK_MCA_INCLUDE_
+
+#ifdef _SK_MCA_DRIVER_
+
+/* Adapter ID's */
+#define SKNET_MCA_ID 0x6afd
+#define SKNET_JUNIOR_MCA_ID 0x6be9
+
+/* media enumeration - defined in a way that it fits onto the MC2+'s
+   POS registers... */
+
+typedef enum { Media_10Base2, Media_10BaseT,
+	Media_10Base5, Media_Unknown, Media_Count
+} skmca_medium;
+
+/* private structure */
+typedef struct {
+	unsigned int slot;	/* MCA-Slot-#                       */
+	void __iomem *base;
+	void __iomem *macbase;	/* base address of MAC address PROM */
+	void __iomem *ioregaddr;/* address of I/O-register (Lo)     */
+	void __iomem *ctrladdr;	/* address of control/stat register */
+	void __iomem *cmdaddr;	/* address of I/O-command register  */
+	int nextrx;		/* index of next RX descriptor to
+				   be read                          */
+	int nexttxput;		/* index of next free TX descriptor */
+	int nexttxdone;		/* index of next TX descriptor to 
+				   be finished                      */
+	int txbusy;		/* # of busy TX descriptors         */
+	struct net_device_stats stat;	/* packet statistics            */
+	int realirq;		/* memorizes actual IRQ, even when 
+				   currently not allocated          */
+	skmca_medium medium;	/* physical cannector               */
+	spinlock_t lock;
+} skmca_priv;
+
+/* card registers: control/status register bits */
+
+#define CTRL_ADR_DATA      0	/* Bit 0 = 0 ->access data register  */
+#define CTRL_ADR_RAP       1	/* Bit 0 = 1 ->access RAP register   */
+#define CTRL_RW_WRITE      0	/* Bit 1 = 0 ->write register        */
+#define CTRL_RW_READ       2	/* Bit 1 = 1 ->read register         */
+#define CTRL_RESET_ON      0	/* Bit 3 = 0 ->reset board           */
+#define CTRL_RESET_OFF     8	/* Bit 3 = 1 ->no reset of board     */
+
+#define STAT_ADR_DATA      0	/* Bit 0 of ctrl register read back  */
+#define STAT_ADR_RAP       1
+#define STAT_RW_WRITE      0	/* Bit 1 of ctrl register read back  */
+#define STAT_RW_READ       2
+#define STAT_RESET_ON      0	/* Bit 3 of ctrl register read back  */
+#define STAT_RESET_OFF     8
+#define STAT_IRQ_ACT       0	/* interrupt pending                 */
+#define STAT_IRQ_NOACT     16	/* no interrupt pending              */
+#define STAT_IO_NOBUSY     0	/* no transfer busy                  */
+#define STAT_IO_BUSY       32	/* transfer busy                     */
+
+/* I/O command register bits */
+
+#define IOCMD_GO           128	/* Bit 7 = 1 -> start register xfer  */
+
+/* LANCE registers */
+
+#define LANCE_CSR0         0	/* Status/Control                    */
+
+#define CSR0_ERR           0x8000	/* general error flag                */
+#define CSR0_BABL          0x4000	/* transmitter timeout               */
+#define CSR0_CERR          0x2000	/* collision error                   */
+#define CSR0_MISS          0x1000	/* lost Rx block                     */
+#define CSR0_MERR          0x0800	/* memory access error               */
+#define CSR0_RINT          0x0400	/* receiver interrupt                */
+#define CSR0_TINT          0x0200	/* transmitter interrupt             */
+#define CSR0_IDON          0x0100	/* initialization done               */
+#define CSR0_INTR          0x0080	/* general interrupt flag            */
+#define CSR0_INEA          0x0040	/* interrupt enable                  */
+#define CSR0_RXON          0x0020	/* receiver enabled                  */
+#define CSR0_TXON          0x0010	/* transmitter enabled               */
+#define CSR0_TDMD          0x0008	/* force transmission now            */
+#define CSR0_STOP          0x0004	/* stop LANCE                        */
+#define CSR0_STRT          0x0002	/* start LANCE                       */
+#define CSR0_INIT          0x0001	/* read initialization block         */
+
+#define LANCE_CSR1         1	/* addr bit 0..15 of initialization  */
+#define LANCE_CSR2         2	/*          16..23 block             */
+
+#define LANCE_CSR3         3	/* Bus control                       */
+#define CSR3_BCON_HOLD     0	/* Bit 0 = 0 -> BM1,BM0,HOLD         */
+#define CSR3_BCON_BUSRQ    1	/* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ    */
+#define CSR3_ALE_HIGH      0	/* Bit 1 = 0 -> ALE asserted high    */
+#define CSR3_ALE_LOW       2	/* Bit 1 = 1 -> ALE asserted low     */
+#define CSR3_BSWAP_OFF     0	/* Bit 2 = 0 -> no byte swap         */
+#define CSR3_BSWAP_ON      4	/* Bit 2 = 1 -> byte swap            */
+
+/* LANCE structures */
+
+typedef struct {		/* LANCE initialization block        */
+	u16 Mode;		/* mode flags                        */
+	u8 PAdr[6];		/* MAC address                       */
+	u8 LAdrF[8];		/* Multicast filter                  */
+	u32 RdrP;		/* Receive descriptor                */
+	u32 TdrP;		/* Transmit descriptor               */
+} LANCE_InitBlock;
+
+/* Mode flags init block */
+
+#define LANCE_INIT_PROM    0x8000	/* enable promiscous mode            */
+#define LANCE_INIT_INTL    0x0040	/* internal loopback                 */
+#define LANCE_INIT_DRTY    0x0020	/* disable retry                     */
+#define LANCE_INIT_COLL    0x0010	/* force collision                   */
+#define LANCE_INIT_DTCR    0x0008	/* disable transmit CRC              */
+#define LANCE_INIT_LOOP    0x0004	/* loopback                          */
+#define LANCE_INIT_DTX     0x0002	/* disable transmitter               */
+#define LANCE_INIT_DRX     0x0001	/* disable receiver                  */
+
+typedef struct {		/* LANCE Tx descriptor               */
+	u16 LowAddr;		/* bit 0..15 of address              */
+	u16 Flags;		/* bit 16..23 of address + Flags     */
+	u16 Len;		/* 2s complement of packet length    */
+	u16 Status;		/* Result of transmission            */
+} LANCE_TxDescr;
+
+#define TXDSCR_FLAGS_OWN   0x8000	/* LANCE owns descriptor             */
+#define TXDSCR_FLAGS_ERR   0x4000	/* summary error flag                */
+#define TXDSCR_FLAGS_MORE  0x1000	/* more than one retry needed?       */
+#define TXDSCR_FLAGS_ONE   0x0800	/* one retry?                        */
+#define TXDSCR_FLAGS_DEF   0x0400	/* transmission deferred?            */
+#define TXDSCR_FLAGS_STP   0x0200	/* first packet in chain?            */
+#define TXDSCR_FLAGS_ENP   0x0100	/* last packet in chain?             */
+
+#define TXDSCR_STATUS_BUFF 0x8000	/* buffer error?                     */
+#define TXDSCR_STATUS_UFLO 0x4000	/* silo underflow during transmit?   */
+#define TXDSCR_STATUS_LCOL 0x1000	/* late collision?                   */
+#define TXDSCR_STATUS_LCAR 0x0800	/* loss of carrier?                  */
+#define TXDSCR_STATUS_RTRY 0x0400	/* retry error?                      */
+
+typedef struct {		/* LANCE Rx descriptor               */
+	u16 LowAddr;		/* bit 0..15 of address              */
+	u16 Flags;		/* bit 16..23 of address + Flags     */
+	u16 MaxLen;		/* 2s complement of buffer length    */
+	u16 Len;		/* packet length                     */
+} LANCE_RxDescr;
+
+#define RXDSCR_FLAGS_OWN   0x8000	/* LANCE owns descriptor             */
+#define RXDSCR_FLAGS_ERR   0x4000	/* summary error flag                */
+#define RXDSCR_FLAGS_FRAM  0x2000	/* framing error flag                */
+#define RXDSCR_FLAGS_OFLO  0x1000	/* FIFO overflow?                    */
+#define RXDSCR_FLAGS_CRC   0x0800	/* CRC error?                        */
+#define RXDSCR_FLAGS_BUFF  0x0400	/* buffer error?                     */
+#define RXDSCR_FLAGS_STP   0x0200	/* first packet in chain?            */
+#define RXDCSR_FLAGS_ENP   0x0100	/* last packet in chain?             */
+
+/* RAM layout */
+
+#define TXCOUNT            4	/* length of TX descriptor queue     */
+#define LTXCOUNT           2	/* log2 of it                        */
+#define RXCOUNT            4	/* length of RX descriptor queue     */
+#define LRXCOUNT           2	/* log2 of it                        */
+
+#define RAM_INITBASE       0	/* LANCE init block                  */
+#define RAM_TXBASE         24	/* Start of TX descriptor queue      */
+#define RAM_RXBASE         \
+(RAM_TXBASE + (TXCOUNT * 8))	/* Start of RX descriptor queue      */
+#define RAM_DATABASE       \
+(RAM_RXBASE + (RXCOUNT * 8))	/* Start of data area for frames     */
+#define RAM_BUFSIZE        1580	/* max. frame size - should never be
+				   reached                           */
+
+#endif				/* _SK_MCA_DRIVER_ */
+
+#endif	/* _SK_MCA_INCLUDE_ */