diff options
| author | Ladislav Michl <ladis@linux-mips.org> | 2007-02-28 01:18:35 +0000 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2007-04-28 11:00:56 -0400 |
| commit | 78ee5b3cc88297bb98843c24b231e99f3f2886a0 (patch) | |
| tree | 6fb146a1808e798841dd9ceb09ffd98fdeacfac9 /drivers/net/sgiseeq.c | |
| parent | 18604c54854549ee0ad65e27ca9cb91c96af784c (diff) | |
| download | op-kernel-dev-78ee5b3cc88297bb98843c24b231e99f3f2886a0.zip op-kernel-dev-78ee5b3cc88297bb98843c24b231e99f3f2886a0.tar.gz | |
Add support for Seeq 8003 on Challenge S Mezz board.
Thanks to Jö Fahlke for donating hardware.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Forward porting of Ladis' 2.4 patch.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/sgiseeq.c')
| -rw-r--r-- | drivers/net/sgiseeq.c | 28 |
1 files changed, 25 insertions, 3 deletions
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index d8c9c5d..1fc7730 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -624,7 +624,7 @@ static inline void setup_rx_ring(struct sgiseeq_rx_desc *buf, int nbufs) #define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) -static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq) +static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq, int has_eeprom) { struct sgiseeq_init_block *sr; struct sgiseeq_private *sp; @@ -650,7 +650,9 @@ static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq) #define EADDR_NVOFS 250 for (i = 0; i < 3; i++) { - unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i); + unsigned short tmp = has_eeprom ? + ip22_eeprom_read(&hpcregs->eeprom, EADDR_NVOFS / 2+i) : + ip22_nvram_read(EADDR_NVOFS / 2+i); dev->dev_addr[2 * i] = tmp >> 8; dev->dev_addr[2 * i + 1] = tmp & 0xff; @@ -683,6 +685,11 @@ static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq) sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + /* Setup PIO and DMA transfer timing */ + sp->hregs->pconfig = 0x161; + sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | + HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + /* Reset the chip. */ hpc3_eth_reset(sp->hregs); @@ -729,8 +736,23 @@ err_out: static int __init sgiseeq_probe(void) { + unsigned int tmp, ret1, ret2 = 0; + /* On board adapter on 1st HPC is always present */ - return sgiseeq_init(hpc3c0, SGI_ENET_IRQ); + ret1 = sgiseeq_init(hpc3c0, SGI_ENET_IRQ, 0); + /* Let's see if second HPC is there */ + if (!(ip22_is_fullhouse()) && + get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]) == 0) { + sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | + SGIMC_GIOPAR_EXP164 | + SGIMC_GIOPAR_HPC264; + hpc3c1->pbus_piocfg[0][0] = 0x3ffff; + /* interrupt/config register on Challenge S Mezz board */ + hpc3c1->pbus_extregs[0][0] = 0x30; + ret2 = sgiseeq_init(hpc3c1, SGI_GIO_0_IRQ, 1); + } + + return (ret1 & ret2) ? ret1 : 0; } static void __exit sgiseeq_exit(void) |
