summaryrefslogtreecommitdiffstats
path: root/drivers/net/s2io.c
diff options
context:
space:
mode:
authorLinas Vepstas <linas@austin.ibm.com>2007-05-14 18:37:30 -0500
committerJeff Garzik <jeff@garzik.org>2007-07-08 22:16:38 -0400
commitd796fdb708fc5b10112934cba43e832c36ce4923 (patch)
tree433063c793bd095721bcbb811cf8460ff3ec228f /drivers/net/s2io.c
parentbd5824f138153f407e300728919e814ab7dcfadb (diff)
downloadop-kernel-dev-d796fdb708fc5b10112934cba43e832c36ce4923.zip
op-kernel-dev-d796fdb708fc5b10112934cba43e832c36ce4923.tar.gz
s2io: add PCI error recovery support
This patch adds PCI error recovery support to the s2io 10-Gigabit ethernet device driver. Third revision, blocks interrupts and the watchdog. Tested, seems to work well. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: Ramkrishna Vepa <Ramkrishna.Vepa@neterion.com> Cc: Raghavendra Koushik <raghavendra.koushik@neterion.com> Cc: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/s2io.c')
-rw-r--r--drivers/net/s2io.c116
1 files changed, 111 insertions, 5 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 09078ff..392ad4a 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -469,11 +469,18 @@ static struct pci_device_id s2io_tbl[] __devinitdata = {
MODULE_DEVICE_TABLE(pci, s2io_tbl);
+static struct pci_error_handlers s2io_err_handler = {
+ .error_detected = s2io_io_error_detected,
+ .slot_reset = s2io_io_slot_reset,
+ .resume = s2io_io_resume,
+};
+
static struct pci_driver s2io_driver = {
.name = "S2IO",
.id_table = s2io_tbl,
.probe = s2io_init_nic,
.remove = __devexit_p(s2io_rem_nic),
+ .err_handler = &s2io_err_handler,
};
/* A simplifier macro used both by init and free shared_mem Fns(). */
@@ -2689,6 +2696,9 @@ static void s2io_netpoll(struct net_device *dev)
u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
int i;
+ if (pci_channel_offline(nic->pdev))
+ return;
+
disable_irq(dev->irq);
atomic_inc(&nic->isr_cnt);
@@ -3215,6 +3225,8 @@ static void alarm_intr_handler(struct s2io_nic *nic)
int i;
if (atomic_read(&nic->card_state) == CARD_DOWN)
return;
+ if (pci_channel_offline(nic->pdev))
+ return;
nic->mac_control.stats_info->sw_stat.ring_full_cnt = 0;
/* Handling the XPAK counters update */
if(nic->mac_control.stats_info->xpak_stat.xpak_timer_count < 72000) {
@@ -4314,6 +4326,10 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
struct mac_info *mac_control;
struct config_param *config;
+ /* Pretend we handled any irq's from a disconnected card */
+ if (pci_channel_offline(sp->pdev))
+ return IRQ_NONE;
+
atomic_inc(&sp->isr_cnt);
mac_control = &sp->mac_control;
config = &sp->config;
@@ -6569,7 +6585,7 @@ static void s2io_rem_isr(struct s2io_nic * sp)
} while(cnt < 5);
}
-static void s2io_card_down(struct s2io_nic * sp)
+static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
{
int cnt = 0;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -6584,7 +6600,8 @@ static void s2io_card_down(struct s2io_nic * sp)
atomic_set(&sp->card_state, CARD_DOWN);
/* disable Tx and Rx traffic on the NIC */
- stop_nic(sp);
+ if (do_io)
+ stop_nic(sp);
s2io_rem_isr(sp);
@@ -6592,7 +6609,7 @@ static void s2io_card_down(struct s2io_nic * sp)
tasklet_kill(&sp->task);
/* Check if the device is Quiescent and then Reset the NIC */
- do {
+ while(do_io) {
/* As per the HW requirement we need to replenish the
* receive buffer to avoid the ring bump. Since there is
* no intention of processing the Rx frame at this pointwe are
@@ -6617,8 +6634,9 @@ static void s2io_card_down(struct s2io_nic * sp)
(unsigned long long) val64);
break;
}
- } while (1);
- s2io_reset(sp);
+ }
+ if (do_io)
+ s2io_reset(sp);
spin_lock_irqsave(&sp->tx_lock, flags);
/* Free all Tx buffers */
@@ -6633,6 +6651,11 @@ static void s2io_card_down(struct s2io_nic * sp)
clear_bit(0, &(sp->link_state));
}
+static void s2io_card_down(struct s2io_nic * sp)
+{
+ do_s2io_card_down(sp, 1);
+}
+
static int s2io_card_up(struct s2io_nic * sp)
{
int i, ret = 0;
@@ -8010,3 +8033,86 @@ static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
return;
}
+
+/**
+ * s2io_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci conneection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct s2io_nic *sp = netdev->priv;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ /* Bring down the card, while avoiding PCI I/O */
+ do_s2io_card_down(sp, 0);
+ sp->device_close_flag = TRUE; /* Device is shut down. */
+ }
+ pci_disable_device(pdev);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * s2io_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ * At this point, the card has exprienced a hard reset,
+ * followed by fixups by BIOS, and has its config space
+ * set up identically to what it was at cold boot.
+ */
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct s2io_nic *sp = netdev->priv;
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "s2io: "
+ "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ pci_set_master(pdev);
+ s2io_reset(sp);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * s2io_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells
+ * us that its OK to resume normal operation.
+ */
+static void s2io_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct s2io_nic *sp = netdev->priv;
+
+ if (netif_running(netdev)) {
+ if (s2io_card_up(sp)) {
+ printk(KERN_ERR "s2io: "
+ "Can't bring device back up after reset.\n");
+ return;
+ }
+
+ if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
+ s2io_card_down(sp);
+ printk(KERN_ERR "s2io: "
+ "Can't resetore mac addr after reset.\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+ netif_wake_queue(netdev);
+}
OpenPOWER on IntegriCloud