[PATCH] S2io: Hardware and miscellaneous fixes

Hi,
This patch contains the following hardware related fixes and other
miscellaneous bug fixes.

1. Updated the definition of single and double-bit ECC errors
2. Earlier we were allocating Transmit descriptors equal to
   MAX_SKB_FRAGS. This was causing a boundary condition failure.
   Need to allocate MAX_SKB_FRAGS+1 descriptors.
3. On some platforms(like PPC), pci_alloc_consistent() can return
   a zero DMA address. Since the NIC cannot handle zero-addresses,
   a workaround has been provided. Basically, we don't use such
   that page. We reallocate.
4. If list_info allocation failed during driver load, check for
   it during driver exit and return instead of trying to dereference
   NULL pointer.
5. Increase the debug level of few non-critical debug messages.
6. Reset the card on critical ECC double errors only in case of
   XframeI since XframeII can recover from such errors.
7. Print copyright message on driver load.
8. Bumped up the driver version no. to 2.0.8.1

Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 8 insertions, 5 deletions

diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 2234a8f..7cefe55 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -1,5 +1,5 @@
 /************************************************************************
- * regs.h: A Linux PCI-X Ethernet driver for S2IO 10GbE Server NIC
+ * regs.h: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
  * Copyright(c) 2002-2005 Neterion Inc.
 
  * This software may be used and distributed according to the terms of
@@ -713,13 +713,16 @@ typedef struct _XENA_dev_config {
 	u64 mc_err_reg;
 #define MC_ERR_REG_ECC_DB_ERR_L            BIT(14)
 #define MC_ERR_REG_ECC_DB_ERR_U            BIT(15)
+#define MC_ERR_REG_MIRI_ECC_DB_ERR_0       BIT(18)
+#define MC_ERR_REG_MIRI_ECC_DB_ERR_1       BIT(20)
 #define MC_ERR_REG_MIRI_CRI_ERR_0          BIT(22)
 #define MC_ERR_REG_MIRI_CRI_ERR_1          BIT(23)
 #define MC_ERR_REG_SM_ERR                  BIT(31)
-#define MC_ERR_REG_ECC_ALL_SNG		   (BIT(6) | \
-					BIT(7) | BIT(17) | BIT(19))
-#define MC_ERR_REG_ECC_ALL_DBL		   (BIT(14) | \
-					BIT(15) | BIT(18) | BIT(20))
+#define MC_ERR_REG_ECC_ALL_SNG		   (BIT(2) | BIT(3) | BIT(4) | BIT(5) |\
+					    BIT(6) | BIT(7) | BIT(17) | BIT(19))
+#define MC_ERR_REG_ECC_ALL_DBL		   (BIT(10) | BIT(11) | BIT(12) |\
+					    BIT(13) | BIT(14) | BIT(15) |\
+					    BIT(18) | BIT(20))
 	u64 mc_err_mask;
 	u64 mc_err_alarm;