Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

21 files changed, 319 insertions, 14 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index fc5938ba..a527e37 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
 	---help---
 	  Supports the LSI ET1011C PHY.
 
+config MICREL_PHY
+	tristate "Driver for Micrel PHYs"
+	---help---
+	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
 config FIXED_PHY
 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB=y
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1342585..13bebab 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_NATIONAL_PHY)	+= national.o
 obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 4fed95e..c128156 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -130,3 +130,11 @@ static void __exit bcm63xx_phy_exit(void)
 
 module_init(bcm63xx_phy_init);
 module_exit(bcm63xx_phy_exit);
+
+static struct mdio_device_id bcm63xx_tbl[] = {
+	{ 0x00406000, 0xfffffc00 },
+	{ 0x002bdc00, 0xfffffc00 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, bcm63xx_tbl);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f482fc4..cecdbbd 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -908,3 +908,19 @@ static void __exit broadcom_exit(void)
 
 module_init(broadcom_init);
 module_exit(broadcom_exit);
+
+static struct mdio_device_id broadcom_tbl[] = {
+	{ 0x00206070, 0xfffffff0 },
+	{ 0x002060e0, 0xfffffff0 },
+	{ 0x002060c0, 0xfffffff0 },
+	{ 0x002060b0, 0xfffffff0 },
+	{ 0x0143bca0, 0xfffffff0 },
+	{ 0x0143bcb0, 0xfffffff0 },
+	{ PHY_ID_BCM50610, 0xfffffff0 },
+	{ PHY_ID_BCM50610M, 0xfffffff0 },
+	{ PHY_ID_BCM57780, 0xfffffff0 },
+	{ PHY_ID_BCMAC131, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, broadcom_tbl);
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index 92282b3..1a325d6 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -158,3 +158,11 @@ static void __exit cicada_exit(void)
 
 module_init(cicada_init);
 module_exit(cicada_exit);
+
+static struct mdio_device_id cicada_tbl[] = {
+	{ 0x000fc410, 0x000ffff0 },
+	{ 0x000fc440, 0x000fffc0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, cicada_tbl);
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index c722e95..29c1761 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -218,3 +218,12 @@ static void __exit davicom_exit(void)
 
 module_init(davicom_init);
 module_exit(davicom_exit);
+
+static struct mdio_device_id davicom_tbl[] = {
+	{ 0x0181b880, 0x0ffffff0 },
+	{ 0x0181b8a0, 0x0ffffff0 },
+	{ 0x00181b80, 0x0ffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, davicom_tbl);
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 7712ebe..13995f5 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -110,3 +110,10 @@ static void __exit et1011c_exit(void)
 
 module_init(et1011c_init);
 module_exit(et1011c_exit);
+
+static struct mdio_device_id et1011c_tbl[] = {
+	{ 0x0282f014, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, et1011c_tbl);
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 904208b..439adaf 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -131,3 +131,10 @@ static void __exit ip175c_exit(void)
 
 module_init(ip175c_init);
 module_exit(ip175c_exit);
+
+static struct mdio_device_id icplus_tbl[] = {
+	{ 0x02430d80, 0x0ffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, icplus_tbl);
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 057ecaa..8ee929b 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -173,3 +173,11 @@ static void __exit lxt_exit(void)
 
 module_init(lxt_init);
 module_exit(lxt_exit);
+
+static struct mdio_device_id lxt_tbl[] = {
+	{ 0x78100000, 0xfffffff0 },
+	{ 0x001378e0, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, lxt_tbl);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 64c7fbe..78b74e83 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -648,3 +648,16 @@ static void __exit marvell_exit(void)
 
 module_init(marvell_init);
 module_exit(marvell_exit);
+
+static struct mdio_device_id marvell_tbl[] = {
+	{ 0x01410c60, 0xfffffff0 },
+	{ 0x01410c90, 0xfffffff0 },
+	{ 0x01410cc0, 0xfffffff0 },
+	{ 0x01410e10, 0xfffffff0 },
+	{ 0x01410cb0, 0xfffffff0 },
+	{ 0x01410cd0, 0xfffffff0 },
+	{ 0x01410e30, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, marvell_tbl);
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index 19e70d7..6539189 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -22,8 +22,13 @@
 #include <linux/types.h>
 #include <linux/delay.h>
 
-#define MDIO_READ 1
-#define MDIO_WRITE 0
+#define MDIO_READ 2
+#define MDIO_WRITE 1
+
+#define MDIO_C45 (1<<15)
+#define MDIO_C45_ADDR (MDIO_C45 | 0)
+#define MDIO_C45_READ (MDIO_C45 | 3)
+#define MDIO_C45_WRITE (MDIO_C45 | 1)
 
 #define MDIO_SETUP_TIME 10
 #define MDIO_HOLD_TIME 10
@@ -89,7 +94,7 @@ static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
 /* Utility to send the preamble, address, and
  * register (common to read and write).
  */
-static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg)
+static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int op, u8 phy, u8 reg)
 {
 	const struct mdiobb_ops *ops = ctrl->ops;
 	int i;
@@ -108,23 +113,56 @@ static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg)
 	for (i = 0; i < 32; i++)
 		mdiobb_send_bit(ctrl, 1);
 
-	/* send the start bit (01) and the read opcode (10) or write (10) */
+	/* send the start bit (01) and the read opcode (10) or write (10).
+	   Clause 45 operation uses 00 for the start and 11, 10 for
+	   read/write */
 	mdiobb_send_bit(ctrl, 0);
-	mdiobb_send_bit(ctrl, 1);
-	mdiobb_send_bit(ctrl, read);
-	mdiobb_send_bit(ctrl, !read);
+	if (op & MDIO_C45)
+		mdiobb_send_bit(ctrl, 0);
+	else
+		mdiobb_send_bit(ctrl, 1);
+	mdiobb_send_bit(ctrl, (op >> 1) & 1);
+	mdiobb_send_bit(ctrl, (op >> 0) & 1);
 
 	mdiobb_send_num(ctrl, phy, 5);
 	mdiobb_send_num(ctrl, reg, 5);
 }
 
+/* In clause 45 mode all commands are prefixed by MDIO_ADDR to specify the
+   lower 16 bits of the 21 bit address. This transfer is done identically to a
+   MDIO_WRITE except for a different code. To enable clause 45 mode or
+   MII_ADDR_C45 into the address. Theoretically clause 45 and normal devices
+   can exist on the same bus. Normal devices should ignore the MDIO_ADDR
+   phase. */
+static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
+{
+	unsigned int dev_addr = (addr >> 16) & 0x1F;
+	unsigned int reg = addr & 0xFFFF;
+	mdiobb_cmd(ctrl, MDIO_C45_ADDR, phy, dev_addr);
+
+	/* send the turnaround (10) */
+	mdiobb_send_bit(ctrl, 1);
+	mdiobb_send_bit(ctrl, 0);
+
+	mdiobb_send_num(ctrl, reg, 16);
+
+	ctrl->ops->set_mdio_dir(ctrl, 0);
+	mdiobb_get_bit(ctrl);
+
+	return dev_addr;
+}
 
 static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
 {
 	struct mdiobb_ctrl *ctrl = bus->priv;
 	int ret, i;
 
-	mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+	if (reg & MII_ADDR_C45) {
+		reg = mdiobb_cmd_addr(ctrl, phy, reg);
+		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+	} else
+		mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+
 	ctrl->ops->set_mdio_dir(ctrl, 0);
 
 	/* check the turnaround bit: the PHY should be driving it to zero */
@@ -147,7 +185,11 @@ static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
 {
 	struct mdiobb_ctrl *ctrl = bus->priv;
 
-	mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+	if (reg & MII_ADDR_C45) {
+		reg = mdiobb_cmd_addr(ctrl, phy, reg);
+		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+	} else
+		mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
 
 	/* send the turnaround (10) */
 	mdiobb_send_bit(ctrl, 1);
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index a872aea..f443d43 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -88,6 +88,7 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
 static int __init octeon_mdiobus_probe(struct platform_device *pdev)
 {
 	struct octeon_mdiobus *bus;
+	union cvmx_smix_en smi_en;
 	int i;
 	int err = -ENOENT;
 
@@ -103,6 +104,10 @@ static int __init octeon_mdiobus_probe(struct platform_device *pdev)
 	if (!bus->mii_bus)
 		goto err;
 
+	smi_en.u64 = 0;
+	smi_en.s.en = 1;
+	cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
+
 	/*
 	 * Standard Octeon evaluation boards don't support phy
 	 * interrupts, we need to poll.
@@ -133,17 +138,22 @@ err_register:
 
 err:
 	devm_kfree(&pdev->dev, bus);
+	smi_en.u64 = 0;
+	cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
 	return err;
 }
 
 static int __exit octeon_mdiobus_remove(struct platform_device *pdev)
 {
 	struct octeon_mdiobus *bus;
+	union cvmx_smix_en smi_en;
 
 	bus = dev_get_drvdata(&pdev->dev);
 
 	mdiobus_unregister(bus->mii_bus);
 	mdiobus_free(bus->mii_bus);
+	smi_en.u64 = 0;
+	cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
 	return 0;
 }
 
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index e17b702..6a6b819 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -208,7 +208,7 @@ EXPORT_SYMBOL(mdiobus_scan);
  * because the bus read/write functions may wait for an interrupt
  * to conclude the operation.
  */
-int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum)
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
 {
 	int retval;
 
@@ -233,7 +233,7 @@ EXPORT_SYMBOL(mdiobus_read);
  * because the bus read/write functions may wait for an interrupt
  * to conclude the operation.
  */
-int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val)
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
 {
 	int err;
 
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 0000000..0692f75
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,114 @@
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 , vsc8201, ks8001
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define	PHY_ID_KSZ9021			0x00221611
+#define	PHY_ID_VSC8201			0x000FC413
+#define	PHY_ID_KS8001			0x0022161A
+
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
+
+static struct phy_driver ks8001_driver = {
+	.phy_id		= PHY_ID_KS8001,
+	.name		= "Micrel KS8001",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver vsc8201_driver = {
+	.phy_id		= PHY_ID_VSC8201,
+	.name		= "Micrel VSC8201",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+	.phy_id		= PHY_ID_KSZ9021,
+	.phy_id_mask	= 0x000fff10,
+	.name		= "Micrel KSZ9021 Gigabit PHY",
+	.features	= PHY_GBIT_FEATURES | SUPPORTED_Pause,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&ks8001_driver);
+	if (ret)
+		goto err1;
+	ret = phy_driver_register(&vsc8201_driver);
+	if (ret)
+		goto err2;
+
+	ret = phy_driver_register(&ksz9021_driver);
+	if (ret)
+		goto err3;
+	return 0;
+
+err3:
+	phy_driver_unregister(&vsc8201_driver);
+err2:
+	phy_driver_unregister(&ks8001_driver);
+err1:
+	return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+	phy_driver_unregister(&ks8001_driver);
+	phy_driver_unregister(&vsc8201_driver);
+	phy_driver_unregister(&ksz9021_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
+
+static struct mdio_device_id micrel_tbl[] = {
+	{ PHY_ID_KSZ9021, 0x000fff10 },
+	{ PHY_ID_VSC8201, 0x00fffff0 },
+	{ PHY_ID_KS8001, 0x00fffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, micrel_tbl);
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 6c636eb..a73ba0b 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -97,7 +97,6 @@ static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)
 	phy_write(phydev, NS_EXP_MEM_DATA, 0x0008);
 	phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN));
 	phy_write(phydev, LED_CTRL_REG, mode);
-	return;
 }
 
 static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
@@ -110,8 +109,6 @@ static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
 
 	printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n",
 	       (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
-
-	return;
 }
 
 static int ns_config_init(struct phy_device *phydev)
@@ -153,3 +150,10 @@ MODULE_LICENSE("GPL");
 
 module_init(ns_init);
 module_exit(ns_exit);
+
+static struct mdio_device_id ns_tbl[] = {
+	{ DP83865_PHY_ID, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, ns_tbl);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index db17945..1a99bb2 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -149,6 +149,7 @@ EXPORT_SYMBOL(phy_scan_fixups);
 struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 {
 	struct phy_device *dev;
+
 	/* We allocate the device, and initialize the
 	 * default values */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
@@ -179,6 +180,17 @@ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 	mutex_init(&dev->lock);
 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
 
+	/* Request the appropriate module unconditionally; don't
+	   bother trying to do so only if it isn't already loaded,
+	   because that gets complicated. A hotplug event would have
+	   done an unconditional modprobe anyway.
+	   We don't do normal hotplug because it won't work for MDIO
+	   -- because it relies on the device staying around for long
+	   enough for the driver to get loaded. With MDIO, the NIC
+	   driver will get bored and give up as soon as it finds that
+	   there's no driver _already_ loaded. */
+	request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
+
 	return dev;
 }
 EXPORT_SYMBOL(phy_device_create);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index f6e190f..6736b23 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -137,3 +137,10 @@ static void __exit qs6612_exit(void)
 
 module_init(qs6612_init);
 module_exit(qs6612_exit);
+
+static struct mdio_device_id qs6612_tbl[] = {
+	{ 0x00181440, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, qs6612_tbl);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index a052a67..f567c0e 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -78,3 +78,10 @@ static void __exit realtek_exit(void)
 
 module_init(realtek_init);
 module_exit(realtek_exit);
+
+static struct mdio_device_id realtek_tbl[] = {
+	{ 0x001cc912, 0x001fffff },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, realtek_tbl);
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index ed2644a..78fa988 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -253,3 +253,14 @@ MODULE_LICENSE("GPL");
 
 module_init(smsc_init);
 module_exit(smsc_exit);
+
+static struct mdio_device_id smsc_tbl[] = {
+	{ 0x0007c0a0, 0xfffffff0 },
+	{ 0x0007c0b0, 0xfffffff0 },
+	{ 0x0007c0c0, 0xfffffff0 },
+	{ 0x0007c0d0, 0xfffffff0 },
+	{ 0x0007c0f0, 0xfffffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, smsc_tbl);
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 6bdb0d5..7229009 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -132,6 +132,14 @@ static void __exit ste10Xp_exit(void)
 module_init(ste10Xp_init);
 module_exit(ste10Xp_exit);
 
+static struct mdio_device_id ste10Xp_tbl[] = {
+	{ STE101P_PHY_ID, 0xfffffff0 },
+	{ STE100P_PHY_ID, 0xffffffff },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, ste10Xp_tbl);
+
 MODULE_DESCRIPTION("STMicroelectronics STe10Xp PHY driver");
 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index dd3b244..45cce50 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -191,3 +191,11 @@ static void __exit vsc82xx_exit(void)
 
 module_init(vsc82xx_init);
 module_exit(vsc82xx_exit);
+
+static struct mdio_device_id vitesse_tbl[] = {
+	{ PHY_ID_VSC8244, 0x000fffc0 },
+	{ PHY_ID_VSC8221, 0x000ffff0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, vitesse_tbl);