Fix numerous minor problems with new phy subsystem.

Includes fixes for problems noted by Adrian Bunk, Andrew Morton,
and one other person lost in the annals of history (and email folders).

6 files changed, 53 insertions, 892 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 8b5db23..c2f1bf1 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
 menu "PHY device support"
 
 config PHYLIB
-	bool "PHY Device support and infrastructure"
+	tristate "PHY Device support and infrastructure"
 	depends on NET_ETHERNET
 	help
 	  Ethernet controllers are usually attached to PHY
@@ -24,31 +24,31 @@ comment "MII PHY device drivers"
 	depends on PHYLIB
 
 config MARVELL_PHY
-	bool "Drivers for Marvell PHYs"
+	tristate "Drivers for Marvell PHYs"
 	depends on PHYLIB
 	---help---
 	  Currently has a driver for the 88E1011S
 	
 config DAVICOM_PHY
-	bool "Drivers for Davicom PHYs"
+	tristate "Drivers for Davicom PHYs"
 	depends on PHYLIB
 	---help---
 	  Currently supports dm9161e and dm9131
 
 config QSEMI_PHY
-	bool "Drivers for Quality Semiconductor PHYs"
+	tristate "Drivers for Quality Semiconductor PHYs"
 	depends on PHYLIB
 	---help---
 	  Currently supports the qs6612
 
 config LXT_PHY
-	bool "Drivers for the Intel LXT PHYs"
+	tristate "Drivers for the Intel LXT PHYs"
 	depends on PHYLIB
 	---help---
 	  Currently supports the lxt970, lxt971
 
 config CICADA_PHY
-	bool "Drivers for the Cicada PHYs"
+	tristate "Drivers for the Cicada PHYs"
 	depends on PHYLIB
 	---help---
 	  Currently supports the cis8204
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1af05de..fb7cb385 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -1,9 +1,9 @@
 # Makefile for Linux PHY drivers
 
-obj-$(CONFIG_PHYLIB) += phy.o phy_device.o mdio_bus.o
+libphy-objs			:= phy.o phy_device.o mdio_bus.o
 
-obj-$(CONFIG_MARVELL_PHY) += marvell.o
-obj-$(CONFIG_DAVICOM_PHY) += davicom.o
-obj-$(CONFIG_CICADA_PHY) += cicada.o
-obj-$(CONFIG_LXT_PHY) += lxt.o
-obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_MARVELL_PHY)	+= libphy.o marvell.o
+obj-$(CONFIG_DAVICOM_PHY)	+= libphy.o davicom.o
+obj-$(CONFIG_CICADA_PHY)	+= libphy.o cicada.o
+obj-$(CONFIG_LXT_PHY)		+= libphy.o lxt.o
+obj-$(CONFIG_QSEMI_PHY)		+= libphy.o qsemi.o
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index e75103b..5fbea6a 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -165,9 +165,9 @@ struct bus_type mdio_bus_type = {
 	.resume		= mdio_bus_resume,
 };
 
-static int __init mdio_bus_init(void)
+int __init mdio_bus_init(void)
 {
 	return bus_register(&mdio_bus_type);
 }
 
-subsys_initcall(mdio_bus_init);
+
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e2c6896..934065d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -39,7 +39,6 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-static void phy_change(void *data);
 static void phy_timer(unsigned long data);
 
 /* Convenience function to print out the current phy status
@@ -464,7 +463,6 @@ void phy_stop_machine(struct phy_device *phydev)
 	phydev->adjust_state = NULL;
 }
 
-#ifdef CONFIG_PHYCONTROL
 /* phy_error:
  *
  * Moves the PHY to the HALTED state in response to a read
@@ -479,6 +477,10 @@ void phy_error(struct phy_device *phydev)
 	spin_unlock(&phydev->lock);
 }
 
+#ifdef CONFIG_PHYCONTROL
+
+static void phy_change(void *data);
+
 /* phy_interrupt
  *
  * description: When a PHY interrupt occurs, the handler disables
@@ -672,6 +674,8 @@ void phy_start(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_stop);
 EXPORT_SYMBOL(phy_start);
 
+#endif /* CONFIG_PHYCONTROL */
+
 /* PHY timer which handles the state machine */
 static void phy_timer(unsigned long data)
 {
@@ -859,4 +863,3 @@ static void phy_timer(unsigned long data)
 	mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
 }
 
-#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy.c.orig b/drivers/net/phy/phy.c.orig
deleted file mode 100644
index 6af17ce..0000000
--- a/drivers/net/phy/phy.c.orig
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * drivers/net/phy/phy.c
- *
- * Framework for configuring and reading PHY devices
- * Based on code in sungem_phy.c and gianfar_phy.c
- *
- * Author: Andy Fleming
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/phy.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
-static void phy_change(void *data);
-static void phy_timer(unsigned long data);
-
-/* Convenience function to print out the current phy status
- */
-void phy_print_status(struct phy_device *phydev)
-{
-	pr_info("%s: Link is %s", phydev->dev.bus_id,
-			phydev->link ? "Up" : "Down");
-	if (phydev->link)
-		printk(" - %d/%s", phydev->speed,
-				DUPLEX_FULL == phydev->duplex ?
-				"Full" : "Half");
-
-	printk("\n");
-}
-EXPORT_SYMBOL(phy_print_status);
-
-
-/* Convenience functions for reading/writing a given PHY
- * register. They MUST NOT be called from interrupt context,
- * because the bus read/write functions may wait for an interrupt
- * to conclude the operation. */
-int phy_read(struct phy_device *phydev, u16 regnum)
-{
-	int retval;
-	struct mii_bus *bus = phydev->bus;
-
-	spin_lock_bh(&bus->mdio_lock);
-	retval = bus->read(bus, phydev->addr, regnum);
-	spin_unlock_bh(&bus->mdio_lock);
-
-	return retval;
-}
-EXPORT_SYMBOL(phy_read);
-
-int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
-{
-	int err;
-	struct mii_bus *bus = phydev->bus;
-
-	spin_lock_bh(&bus->mdio_lock);
-	err = bus->write(bus, phydev->addr, regnum, val);
-	spin_unlock_bh(&bus->mdio_lock);
-
-	return err;
-}
-EXPORT_SYMBOL(phy_write);
-
-
-int phy_clear_interrupt(struct phy_device *phydev)
-{
-	int err = 0;
-
-	if (phydev->drv->ack_interrupt)
-		err = phydev->drv->ack_interrupt(phydev);
-
-	return err;
-}
-
-
-int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
-{
-	int err = 0;
-
-	phydev->interrupts = interrupts;
-	if (phydev->drv->config_intr)
-		err = phydev->drv->config_intr(phydev);
-
-	return err;
-}
-
-
-/* phy_aneg_done
- *
- * description: Reads the status register and returns 0 either if
- *   auto-negotiation is incomplete, or if there was an error.
- *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
- */
-static inline int phy_aneg_done(struct phy_device *phydev)
-{
-	int retval;
-
-	retval = phy_read(phydev, MII_BMSR);
-
-	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
-}
-
-/* phy_start_aneg
- *
- * description: Calls the PHY driver's config_aneg, and then
- *   sets the PHY state to PHY_AN if auto-negotiation is enabled,
- *   and to PHY_FORCING if auto-negotiation is disabled. Unless
- *   the PHY is currently HALTED.
- */
-int phy_start_aneg(struct phy_device *phydev)
-{
-	int err;
-
-	spin_lock(&phydev->lock);
-
-	if (AUTONEG_DISABLE == phydev->autoneg)
-		phy_sanitize_settings(phydev);
-
-	err = phydev->drv->config_aneg(phydev);
-
-	if (err < 0)
-		goto out_unlock;
-
-	if (phydev->state != PHY_HALTED) {
-		if (AUTONEG_ENABLE == phydev->autoneg) {
-			phydev->state = PHY_AN;
-			phydev->link_timeout = PHY_AN_TIMEOUT;
-		} else {
-			phydev->state = PHY_FORCING;
-			phydev->link_timeout = PHY_FORCE_TIMEOUT;
-		}
-	}
-
-out_unlock:
-	spin_unlock(&phydev->lock);
-	return err;
-}
-EXPORT_SYMBOL(phy_start_aneg);
-
-
-/* A structure for mapping a particular speed and duplex
- * combination to a particular SUPPORTED and ADVERTISED value */
-struct phy_setting {
-	int speed;
-	int duplex;
-	u32 setting;
-};
-
-/* A mapping of all SUPPORTED settings to speed/duplex */
-static struct phy_setting settings[] = {
-	{
-		.speed = 10000,
-		.duplex = DUPLEX_FULL,
-		.setting = SUPPORTED_10000baseT_Full,
-	},
-	{
-		.speed = SPEED_1000,
-		.duplex = DUPLEX_FULL,
-		.setting = SUPPORTED_1000baseT_Full,
-	},
-	{
-		.speed = SPEED_1000,
-		.duplex = DUPLEX_HALF,
-		.setting = SUPPORTED_1000baseT_Half,
-	},
-	{
-		.speed = SPEED_100,
-		.duplex = DUPLEX_FULL,
-		.setting = SUPPORTED_100baseT_Full,
-	},
-	{
-		.speed = SPEED_100,
-		.duplex = DUPLEX_HALF,
-		.setting = SUPPORTED_100baseT_Half,
-	},
-	{
-		.speed = SPEED_10,
-		.duplex = DUPLEX_FULL,
-		.setting = SUPPORTED_10baseT_Full,
-	},
-	{
-		.speed = SPEED_10,
-		.duplex = DUPLEX_HALF,
-		.setting = SUPPORTED_10baseT_Half,
-	},
-};
-
-#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting))
-
-/* phy_find_setting
- *
- * description: Searches the settings array for the setting which
- *   matches the desired speed and duplex, and returns the index
- *   of that setting.  Returns the index of the last setting if
- *   none of the others match.
- */
-static inline int phy_find_setting(int speed, int duplex)
-{
-	int idx = 0;
-
-	while (idx < ARRAY_SIZE(settings) &&
-			(settings[idx].speed != speed ||
-			settings[idx].duplex != duplex))
-		idx++;
-
-	return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
-}
-
-/* phy_find_valid
- * idx: The first index in settings[] to search
- * features: A mask of the valid settings
- *
- * description: Returns the index of the first valid setting less
- *   than or equal to the one pointed to by idx, as determined by
- *   the mask in features.  Returns the index of the last setting
- *   if nothing else matches.
- */
-static inline int phy_find_valid(int idx, u32 features)
-{
-	while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
-		idx++;
-
-	return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
-}
-
-/* phy_sanitize_settings
- *
- * description: Make sure the PHY is set to supported speeds and
- *   duplexes.  Drop down by one in this order:  1000/FULL,
- *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
- */
-void phy_sanitize_settings(struct phy_device *phydev)
-{
-	u32 features = phydev->supported;
-	int idx;
-
-	/* Sanitize settings based on PHY capabilities */
-	if ((features & SUPPORTED_Autoneg) == 0)
-		phydev->autoneg = 0;
-
-	idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
-			features);
-
-	phydev->speed = settings[idx].speed;
-	phydev->duplex = settings[idx].duplex;
-}
-EXPORT_SYMBOL(phy_sanitize_settings);
-
-/* phy_force_reduction
- *
- * description: Reduces the speed/duplex settings by
- *   one notch.  The order is so:
- *   1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
- *   10/FULL, 10/HALF.  The function bottoms out at 10/HALF.
- */
-static void phy_force_reduction(struct phy_device *phydev)
-{
-	int idx;
-
-	idx = phy_find_setting(phydev->speed, phydev->duplex);
-	
-	idx++;
-
-	idx = phy_find_valid(idx, phydev->supported);
-
-	phydev->speed = settings[idx].speed;
-	phydev->duplex = settings[idx].duplex;
-
-	pr_info("Trying %d/%s\n", phydev->speed,
-			DUPLEX_FULL == phydev->duplex ?
-			"FULL" : "HALF");
-}
-
-/* phy_ethtool_sset:
- * A generic ethtool sset function.  Handles all the details
- *
- * A few notes about parameter checking:
- * - We don't set port or transceiver, so we don't care what they
- *   were set to.
- * - phy_start_aneg() will make sure forced settings are sane, and
- *   choose the next best ones from the ones selected, so we don't
- *   care if ethtool tries to give us bad values
- */
-int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
-{
-	if (cmd->phy_address != phydev->addr)
-		return -EINVAL;
-
-	/* We make sure that we don't pass unsupported
-	 * values in to the PHY */
-	cmd->advertising &= phydev->supported;
-
-	/* Verify the settings we care about. */
-	if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
-		return -EINVAL;
-
-	if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
-		return -EINVAL;
-
-	if (cmd->autoneg == AUTONEG_DISABLE
-			&& ((cmd->speed != SPEED_1000
-					&& cmd->speed != SPEED_100
-					&& cmd->speed != SPEED_10)
-				|| (cmd->duplex != DUPLEX_HALF
-					&& cmd->duplex != DUPLEX_FULL)))
-		return -EINVAL;
-
-	phydev->autoneg = cmd->autoneg;
-
-	phydev->speed = cmd->speed;
-
-	phydev->advertising = cmd->advertising;
-
-	if (AUTONEG_ENABLE == cmd->autoneg)
-		phydev->advertising |= ADVERTISED_Autoneg;
-	else
-		phydev->advertising &= ~ADVERTISED_Autoneg;
-
-	phydev->duplex = cmd->duplex;
-
-	/* Restart the PHY */
-	phy_start_aneg(phydev);
-
-	return 0;
-}
-
-int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
-{
-	cmd->supported = phydev->supported;
-
-	cmd->advertising = phydev->advertising;
-
-	cmd->speed = phydev->speed;
-	cmd->duplex = phydev->duplex;
-	cmd->port = PORT_MII;
-	cmd->phy_address = phydev->addr;
-	cmd->transceiver = XCVR_EXTERNAL;
-	cmd->autoneg = phydev->autoneg;
-
-	return 0;
-}
-
-
-/* Note that this function is currently incompatible with the
- * PHYCONTROL layer.  It changes registers without regard to
- * current state.  Use at own risk
- */
-int phy_mii_ioctl(struct phy_device *phydev,
-		struct mii_ioctl_data *mii_data, int cmd)
-{
-	u16 val = mii_data->val_in;
-
-	switch (cmd) {
-	case SIOCGMIIPHY:
-		mii_data->phy_id = phydev->addr;
-		break;
-	case SIOCGMIIREG:
-		mii_data->val_out = phy_read(phydev, mii_data->reg_num);
-		break;
-
-	case SIOCSMIIREG:
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-
-		if (mii_data->phy_id == phydev->addr) {
-			switch(mii_data->reg_num) {
-			case MII_BMCR:
-				if (val & (BMCR_RESET|BMCR_ANENABLE))
-					phydev->autoneg = AUTONEG_DISABLE;
-				else
-					phydev->autoneg = AUTONEG_ENABLE;
-				if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
-					phydev->duplex = DUPLEX_FULL;
-				else
-					phydev->duplex = DUPLEX_HALF;
-				break;
-			case MII_ADVERTISE:
-				phydev->advertising = val;
-				break;
-			default:
-				/* do nothing */
-				break;
-			}
-		}
-
-		phy_write(phydev, mii_data->reg_num, val);
-		
-		if (mii_data->reg_num == MII_BMCR 
-				&& val & BMCR_RESET
-				&& phydev->drv->config_init)
-			phydev->drv->config_init(phydev);
-		break;
-	}
-
-	return 0;
-}
-
-/* phy_start_machine:
- *
- * description: The PHY infrastructure can run a state machine
- *   which tracks whether the PHY is starting up, negotiating,
- *   etc.  This function starts the timer which tracks the state
- *   of the PHY.  If you want to be notified when the state
- *   changes, pass in the callback, otherwise, pass NULL.  If you
- *   want to maintain your own state machine, do not call this
- *   function. */
-void phy_start_machine(struct phy_device *phydev,
-		void (*handler)(struct net_device *))
-{
-	phydev->adjust_state = handler;
-
-	init_timer(&phydev->phy_timer);
-	phydev->phy_timer.function = &phy_timer;
-	phydev->phy_timer.data = (unsigned long) phydev;
-	mod_timer(&phydev->phy_timer, jiffies + HZ);
-}
-
-/* phy_stop_machine
- *
- * description: Stops the state machine timer, sets the state to
- *   UP (unless it wasn't up yet), and then frees the interrupt,
- *   if it is in use. This function must be called BEFORE
- *   phy_detach.
- */
-void phy_stop_machine(struct phy_device *phydev)
-{
-	del_timer_sync(&phydev->phy_timer);
-
-	spin_lock(&phydev->lock);
-	if (phydev->state > PHY_UP)
-		phydev->state = PHY_UP;
-	spin_unlock(&phydev->lock);
-
-	if (phydev->irq != PHY_POLL)
-		phy_stop_interrupts(phydev);
-
-	phydev->adjust_state = NULL;
-}
-
-#ifdef CONFIG_PHYCONTROL
-/* phy_error:
- *
- * Moves the PHY to the HALTED state in response to a read
- * or write error, and tells the controller the link is down.
- * Must not be called from interrupt context, or while the
- * phydev->lock is held.
- */
-void phy_error(struct phy_device *phydev)
-{
-	spin_lock(&phydev->lock);
-	phydev->state = PHY_HALTED;
-	spin_unlock(&phydev->lock);
-}
-
-/* phy_interrupt
- *
- * description: When a PHY interrupt occurs, the handler disables
- * interrupts, and schedules a work task to clear the interrupt.
- */
-static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
-{
-	struct phy_device *phydev = phy_dat;
-
-	/* The MDIO bus is not allowed to be written in interrupt
-	 * context, so we need to disable the irq here.  A work
-	 * queue will write the PHY to disable and clear the
-	 * interrupt, and then reenable the irq line. */
-	disable_irq_nosync(irq);
-
-	schedule_work(&phydev->phy_queue);
-
-	return IRQ_HANDLED;
-}
-
-/* Enable the interrupts from the PHY side */
-int phy_enable_interrupts(struct phy_device *phydev)
-{
-	int err;
-
-	err = phy_clear_interrupt(phydev);
-
-	if (err < 0)
-		return err;
-
-	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
-	return err;
-}
-
-/* Disable the PHY interrupts from the PHY side */
-int phy_disable_interrupts(struct phy_device *phydev)
-{
-	int err;
-
-	/* Disable PHY interrupts */
-	err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-
-	if (err)
-		goto phy_err;
-
-	/* Clear the interrupt */
-	err = phy_clear_interrupt(phydev);
-
-	if (err)
-		goto phy_err;
-
-	return 0;
-
-phy_err:
-	phy_error(phydev);
-
-	return err;
-}
-
-/* phy_start_interrupts
- *
- * description: Request the interrupt for the given PHY.  If
- *   this fails, then we set irq to PHY_POLL.
- *   Otherwise, we enable the interrupts in the PHY.
- *   Returns 0 on success.
- *   This should only be called with a valid IRQ number.
- */
-int phy_start_interrupts(struct phy_device *phydev)
-{
-	int err = 0;
-
-	INIT_WORK(&phydev->phy_queue, phy_change, phydev);
-
-	if (request_irq(phydev->irq, phy_interrupt,
-				SA_SHIRQ,
-				"phy_interrupt",
-				phydev) < 0) {
-		printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
-				phydev->bus->name,
-				phydev->irq);
-		phydev->irq = PHY_POLL;
-		return 0;
-	}
-
-	err = phy_enable_interrupts(phydev);
-
-	return err;
-}
-EXPORT_SYMBOL(phy_start_interrupts);
-
-int phy_stop_interrupts(struct phy_device *phydev)
-{
-	int err;
-
-	err = phy_disable_interrupts(phydev);
-
-	if (err)
-		phy_error(phydev);
-
-	free_irq(phydev->irq, phydev);
-
-	return err;
-}
-EXPORT_SYMBOL(phy_stop_interrupts);
-
-
-/* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void phy_change(void *data)
-{
-	int err;
-	struct phy_device *phydev = data;
-
-	err = phy_disable_interrupts(phydev);
-
-	if (err)
-		goto phy_err;
-
-	spin_lock(&phydev->lock);
-	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
-		phydev->state = PHY_CHANGELINK;
-	spin_unlock(&phydev->lock);
-
-	enable_irq(phydev->irq);
-
-	/* Reenable interrupts */
-	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
-	if (err)
-		goto irq_enable_err;
-
-	return;
-
-irq_enable_err:
-	disable_irq(phydev->irq);
-phy_err:
-	phy_error(phydev);
-}
-
-/* Bring down the PHY link, and stop checking the status. */
-void phy_stop(struct phy_device *phydev)
-{
-	spin_lock(&phydev->lock);
-
-	if (PHY_HALTED == phydev->state)
-		goto out_unlock;
-
-	if (phydev->irq != PHY_POLL) {
-		/* Clear any pending interrupts */
-		phy_clear_interrupt(phydev);
-
-		/* Disable PHY Interrupts */
-		phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-	}
-
-	phydev->state = PHY_HALTED;
-
-out_unlock:
-	spin_unlock(&phydev->lock);
-}
-
-
-/* phy_start
- *
- * description: Indicates the attached device's readiness to
- *   handle PHY-related work.  Used during startup to start the
- *   PHY, and after a call to phy_stop() to resume operation.
- *   Also used to indicate the MDIO bus has cleared an error
- *   condition.
- */
-void phy_start(struct phy_device *phydev)
-{
-	spin_lock(&phydev->lock);
-
-	switch (phydev->state) {
-		case PHY_STARTING:
-			phydev->state = PHY_PENDING;
-			break;
-		case PHY_READY:
-			phydev->state = PHY_UP;
-			break;
-		case PHY_HALTED:
-			phydev->state = PHY_RESUMING;
-		default:
-			break;
-	}
-	spin_unlock(&phydev->lock);
-}
-EXPORT_SYMBOL(phy_stop);
-EXPORT_SYMBOL(phy_start);
-
-/* PHY timer which handles the state machine */
-static void phy_timer(unsigned long data)
-{
-	struct phy_device *phydev = (struct phy_device *)data;
-	int needs_aneg = 0;
-	int err = 0;
-
-	spin_lock(&phydev->lock);
-
-	if (phydev->adjust_state)
-		phydev->adjust_state(phydev->attached_dev);
-
-	switch(phydev->state) {
-		case PHY_DOWN:
-		case PHY_STARTING:
-		case PHY_READY:
-		case PHY_PENDING:
-			break;
-		case PHY_UP:
-			needs_aneg = 1;
-
-			phydev->link_timeout = PHY_AN_TIMEOUT;
-
-			break;
-		case PHY_AN:
-			/* Check if negotiation is done.  Break
-			 * if there's an error */
-			err = phy_aneg_done(phydev);
-			if (err < 0)
-				break;
-
-			/* If auto-negotiation is done, we change to
-			 * either RUNNING, or NOLINK */
-			if (err > 0) {
-				err = phy_read_status(phydev);
-
-				if (err)
-					break;
-
-				if (phydev->link) {
-					phydev->state = PHY_RUNNING;
-					netif_carrier_on(phydev->attached_dev);
-				} else {
-					phydev->state = PHY_NOLINK;
-					netif_carrier_off(phydev->attached_dev);
-				}
-
-				phydev->adjust_link(phydev->attached_dev);
-
-			} else if (0 == phydev->link_timeout--) {
-				/* The counter expired, so either we
-				 * switch to forced mode, or the
-				 * magic_aneg bit exists, and we try aneg
-				 * again */
-				if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) {
-					int idx;
-
-					/* We'll start from the
-					 * fastest speed, and work
-					 * our way down */
-					idx = phy_find_valid(0,
-							phydev->supported);
-
-					phydev->speed = settings[idx].speed;
-					phydev->duplex = settings[idx].duplex;
-					
-					phydev->autoneg = AUTONEG_DISABLE;
-					phydev->state = PHY_FORCING;
-					phydev->link_timeout =
-						PHY_FORCE_TIMEOUT;
-
-					pr_info("Trying %d/%s\n",
-							phydev->speed,
-							DUPLEX_FULL ==
-							phydev->duplex ?
-							"FULL" : "HALF");
-				}
-
-				needs_aneg = 1;
-			}
-			break;
-		case PHY_NOLINK:
-			err = phy_read_status(phydev);
-
-			if (err)
-				break;
-
-			if (phydev->link) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-				phydev->adjust_link(phydev->attached_dev);
-			}
-			break;
-		case PHY_FORCING:
-			err = phy_read_status(phydev);
-
-			if (err)
-				break;
-
-			if (phydev->link) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-			} else {
-				if (0 == phydev->link_timeout--) {
-					phy_force_reduction(phydev);
-					needs_aneg = 1;
-				}
-			}
-
-			phydev->adjust_link(phydev->attached_dev);
-			break;
-		case PHY_RUNNING:
-			/* Only register a CHANGE if we are
-			 * polling */
-			if (PHY_POLL == phydev->irq)
-				phydev->state = PHY_CHANGELINK;
-			break;
-		case PHY_CHANGELINK:
-			err = phy_read_status(phydev);
-
-			if (err)
-				break;
-
-			if (phydev->link) {
-				phydev->state = PHY_RUNNING;
-				netif_carrier_on(phydev->attached_dev);
-			} else {
-				phydev->state = PHY_NOLINK;
-				netif_carrier_off(phydev->attached_dev);
-			}
-
-			phydev->adjust_link(phydev->attached_dev);
-
-			if (PHY_POLL != phydev->irq)
-				err = phy_config_interrupt(phydev,
-						PHY_INTERRUPT_ENABLED);
-			break;
-		case PHY_HALTED:
-			if (phydev->link) {
-				phydev->link = 0;
-				netif_carrier_off(phydev->attached_dev);
-				phydev->adjust_link(phydev->attached_dev);
-			}
-			break;
-		case PHY_RESUMING:
-
-			err = phy_clear_interrupt(phydev);
-
-			if (err)
-				break;
-
-			err = phy_config_interrupt(phydev,
-					PHY_INTERRUPT_ENABLED);
-
-			if (err)
-				break;
-
-			if (AUTONEG_ENABLE == phydev->autoneg) {
-				err = phy_aneg_done(phydev);
-				if (err < 0)
-					break;
-
-				/* err > 0 if AN is done.
-				 * Otherwise, it's 0, and we're
-				 * still waiting for AN */
-				if (err > 0) {
-					phydev->state = PHY_RUNNING;
-				} else {
-					phydev->state = PHY_AN;
-					phydev->link_timeout = PHY_AN_TIMEOUT;
-				}
-			} else
-				phydev->state = PHY_RUNNING;
-			break;
-	}
-
-	spin_unlock(&phydev->lock);
-
-	if (needs_aneg)
-		err = phy_start_aneg(phydev);
-
-	if (err < 0)
-		phy_error(phydev);
-
-	mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
-}
-
-#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f0595af..c111383 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -39,6 +39,19 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
+static int genphy_config_init(struct phy_device *phydev);
+
+static struct phy_driver genphy_driver = {
+	.phy_id		= 0xffffffff,
+	.phy_id_mask	= 0xffffffff,
+	.name		= "Generic PHY",
+	.config_init	= genphy_config_init,
+	.features	= 0,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver	=	{.owner	= THIS_MODULE, },
+};
+
 /* get_phy_device
  *
  * description: Reads the ID registers of the PHY at addr on the
@@ -656,27 +669,32 @@ void phy_driver_unregister(struct phy_driver *drv)
 }
 EXPORT_SYMBOL(phy_driver_unregister);
 
-static struct phy_driver genphy_driver = {
-	.phy_id		= 0xffffffff,
-	.phy_id_mask	= 0xffffffff,
-	.name		= "Generic PHY",
-	.config_init	= genphy_config_init,
-	.features	= 0,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.driver	=	{.owner	= THIS_MODULE, },
-};
 
-static int __init genphy_init(void)
+static int __init phy_init(void)
 {
-	return phy_driver_register(&genphy_driver);
+	int rc;
+	extern int mdio_bus_init(void);
+
+	rc = phy_driver_register(&genphy_driver);
+	if (rc)
+		goto out;
+
+	rc = mdio_bus_init();
+	if (rc)
+		goto out_unreg;
 
+	return 0;
+
+out_unreg:
+	phy_driver_unregister(&genphy_driver);
+out:
+	return rc;
 }
 
-static void __exit genphy_exit(void)
+static void __exit phy_exit(void)
 {
 	phy_driver_unregister(&genphy_driver);
 }
 
-module_init(genphy_init);
-module_exit(genphy_exit);
+module_init(phy_init);
+module_exit(phy_exit);