summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorGiuseppe CAVALLARO <peppe.cavallaro@st.com>2010-12-08 23:05:13 +0000
committerDavid S. Miller <davem@davemloft.net>2010-12-10 15:48:43 -0800
commit377ecca9ba6d98f31517e2322075e94d1be94561 (patch)
treef29578587457734c1579395740ee7034779d3b51 /drivers/net/phy
parentd9ca676bcb26e1fdff9265a3e70f697cd381c889 (diff)
downloadop-kernel-dev-377ecca9ba6d98f31517e2322075e94d1be94561.zip
op-kernel-dev-377ecca9ba6d98f31517e2322075e94d1be94561.tar.gz
phy: add the IC+ IP1001 driver
This patch adds the IC+ IP1001 (Gigabit Ethernet Transceiver) driver. I've had to add an additional delay (2ns) to adjust RX clock phase at GMII/ RGMII interface (according to the PHY data-sheet). This helps to have the RGMII working on some ST platforms. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig2
-rw-r--r--drivers/net/phy/icplus.c59
2 files changed, 55 insertions, 6 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cb3d13e..35fda5a 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -64,7 +64,7 @@ config BCM63XX_PHY
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
- Currently supports the IP175C PHY.
+ Currently supports the IP175C and IP1001 PHYs.
config REALTEK_PHY
tristate "Drivers for Realtek PHYs"
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index c1d2d25..9a09e24 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -30,7 +30,7 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
@@ -89,6 +89,33 @@ static int ip175c_config_init(struct phy_device *phydev)
return 0;
}
+static int ip1001_config_init(struct phy_device *phydev)
+{
+ int err, value;
+
+ /* Software Reset PHY */
+ value = phy_read(phydev, MII_BMCR);
+ value |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, value);
+ if (err < 0)
+ return err;
+
+ do {
+ value = phy_read(phydev, MII_BMCR);
+ } while (value & BMCR_RESET);
+
+ /* Additional delay (2ns) used to adjust RX clock phase
+ * at GMII/ RGMII interface */
+ value = phy_read(phydev, 16);
+ value |= 0x3;
+
+ err = phy_write(phydev, 16, value);
+ if (err < 0)
+ return err;
+
+ return err;
+}
+
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->addr == 4) /* WAN port */
@@ -121,21 +148,43 @@ static struct phy_driver ip175c_driver = {
.driver = { .owner = THIS_MODULE,},
};
-static int __init ip175c_init(void)
+static struct phy_driver ip1001_driver = {
+ .phy_id = 0x02430d90,
+ .name = "ICPlus IP1001",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause,
+ .config_init = &ip1001_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init icplus_init(void)
{
+ int ret = 0;
+
+ ret = phy_driver_register(&ip1001_driver);
+ if (ret < 0)
+ return -ENODEV;
+
return phy_driver_register(&ip175c_driver);
}
-static void __exit ip175c_exit(void)
+static void __exit icplus_exit(void)
{
+ phy_driver_unregister(&ip1001_driver);
phy_driver_unregister(&ip175c_driver);
}
-module_init(ip175c_init);
-module_exit(ip175c_exit);
+module_init(icplus_init);
+module_exit(icplus_exit);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
+ { 0x02430d90, 0x0ffffff0 },
{ }
};
OpenPOWER on IntegriCloud