summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorAndy Fleming <afleming@freescale.com>2005-08-24 18:46:21 -0500
committerJeff Garzik <jgarzik@pobox.com>2005-08-28 20:28:25 -0400
commite13934563db047043ccead26412f552375cea90c (patch)
tree4013ca99f718559447315370c9d5e220e71d99d5 /drivers/net/phy
parent86f0cd505781e42000763821ec6f70127a6abaae (diff)
downloadop-kernel-dev-e13934563db047043ccead26412f552375cea90c.zip
op-kernel-dev-e13934563db047043ccead26412f552375cea90c.tar.gz
[PATCH] PHY Layer fixup
This patch adds back the code that was taken out, thus re-enabling: * The PHY Layer to initialize without crashing * Drivers to actually connect to PHYs * The entire PHY Control Layer This patch is used by the gianfar driver, and other drivers which are in development. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig8
-rw-r--r--drivers/net/phy/Makefile11
-rw-r--r--drivers/net/phy/mdio_bus.c79
-rw-r--r--drivers/net/phy/phy.c325
-rw-r--r--drivers/net/phy/phy_device.c172
5 files changed, 493 insertions, 102 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6450bd7..6a2fe35 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -12,6 +12,14 @@ config PHYLIB
devices. This option provides infrastructure for
managing PHY devices.
+config PHYCONTROL
+ bool " Support for automatically handling PHY state changes"
+ depends on PHYLIB
+ help
+ Adds code to perform all the work for keeping PHY link
+ state (speed/duplex/etc) up-to-date. Also handles
+ interrupts.
+
comment "MII PHY device drivers"
depends on PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index fb7cb385..e4116a5 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -2,8 +2,9 @@
libphy-objs := phy.o phy_device.o mdio_bus.o
-obj-$(CONFIG_MARVELL_PHY) += libphy.o marvell.o
-obj-$(CONFIG_DAVICOM_PHY) += libphy.o davicom.o
-obj-$(CONFIG_CICADA_PHY) += libphy.o cicada.o
-obj-$(CONFIG_LXT_PHY) += libphy.o lxt.o
-obj-$(CONFIG_QSEMI_PHY) += libphy.o qsemi.o
+obj-$(CONFIG_PHYLIB) += libphy.o
+obj-$(CONFIG_MARVELL_PHY) += marvell.o
+obj-$(CONFIG_DAVICOM_PHY) += davicom.o
+obj-$(CONFIG_CICADA_PHY) += cicada.o
+obj-$(CONFIG_LXT_PHY) += lxt.o
+obj-$(CONFIG_QSEMI_PHY) += qsemi.o
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index d5a05be..41f62c0 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -38,6 +38,80 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
+/* mdiobus_register
+ *
+ * description: Called by a bus driver to bring up all the PHYs
+ * on a given bus, and attach them to the bus
+ */
+int mdiobus_register(struct mii_bus *bus)
+{
+ int i;
+ int err = 0;
+
+ spin_lock_init(&bus->mdio_lock);
+
+ if (NULL == bus || NULL == bus->name ||
+ NULL == bus->read ||
+ NULL == bus->write)
+ return -EINVAL;
+
+ if (bus->reset)
+ bus->reset(bus);
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ struct phy_device *phydev;
+
+ phydev = get_phy_device(bus, i);
+
+ if (IS_ERR(phydev))
+ return PTR_ERR(phydev);
+
+ /* There's a PHY at this address
+ * We need to set:
+ * 1) IRQ
+ * 2) bus_id
+ * 3) parent
+ * 4) bus
+ * 5) mii_bus
+ * And, we need to register it */
+ if (phydev) {
+ phydev->irq = bus->irq[i];
+
+ phydev->dev.parent = bus->dev;
+ phydev->dev.bus = &mdio_bus_type;
+ sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i);
+
+ phydev->bus = bus;
+
+ err = device_register(&phydev->dev);
+
+ if (err)
+ printk(KERN_ERR "phy %d failed to register\n",
+ i);
+ }
+
+ bus->phy_map[i] = phydev;
+ }
+
+ pr_info("%s: probed\n", bus->name);
+
+ return err;
+}
+EXPORT_SYMBOL(mdiobus_register);
+
+void mdiobus_unregister(struct mii_bus *bus)
+{
+ int i;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if (bus->phy_map[i]) {
+ device_unregister(&bus->phy_map[i]->dev);
+ kfree(bus->phy_map[i]);
+ }
+ }
+}
+EXPORT_SYMBOL(mdiobus_unregister);
+
/* mdio_bus_match
*
* description: Given a PHY device, and a PHY driver, return 1 if
@@ -96,4 +170,7 @@ int __init mdio_bus_init(void)
return bus_register(&mdio_bus_type);
}
-
+void __exit mdio_bus_exit(void)
+{
+ bus_unregister(&mdio_bus_type);
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d3e43631..d9e11f9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -39,10 +39,20 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-static void phy_timer(unsigned long data);
-static int phy_disable_interrupts(struct phy_device *phydev);
-static void phy_sanitize_settings(struct phy_device *phydev);
-static int phy_stop_interrupts(struct phy_device *phydev);
+/* Convenience function to print out the current phy status
+ */
+void phy_print_status(struct phy_device *phydev)
+{
+ pr_info("%s: Link is %s", phydev->dev.bus_id,
+ phydev->link ? "Up" : "Down");
+ if (phydev->link)
+ printk(" - %d/%s", phydev->speed,
+ DUPLEX_FULL == phydev->duplex ?
+ "Full" : "Half");
+
+ printk("\n");
+}
+EXPORT_SYMBOL(phy_print_status);
/* Convenience functions for reading/writing a given PHY
@@ -114,42 +124,6 @@ static inline int phy_aneg_done(struct phy_device *phydev)
return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
}
-/* phy_start_aneg
- *
- * description: Calls the PHY driver's config_aneg, and then
- * sets the PHY state to PHY_AN if auto-negotiation is enabled,
- * and to PHY_FORCING if auto-negotiation is disabled. Unless
- * the PHY is currently HALTED.
- */
-static int phy_start_aneg(struct phy_device *phydev)
-{
- int err;
-
- spin_lock(&phydev->lock);
-
- if (AUTONEG_DISABLE == phydev->autoneg)
- phy_sanitize_settings(phydev);
-
- err = phydev->drv->config_aneg(phydev);
-
- if (err < 0)
- goto out_unlock;
-
- if (phydev->state != PHY_HALTED) {
- if (AUTONEG_ENABLE == phydev->autoneg) {
- phydev->state = PHY_AN;
- phydev->link_timeout = PHY_AN_TIMEOUT;
- } else {
- phydev->state = PHY_FORCING;
- phydev->link_timeout = PHY_FORCE_TIMEOUT;
- }
- }
-
-out_unlock:
- spin_unlock(&phydev->lock);
- return err;
-}
-
/* A structure for mapping a particular speed and duplex
* combination to a particular SUPPORTED and ADVERTISED value */
struct phy_setting {
@@ -241,7 +215,7 @@ static inline int phy_find_valid(int idx, u32 features)
* duplexes. Drop down by one in this order: 1000/FULL,
* 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
*/
-static void phy_sanitize_settings(struct phy_device *phydev)
+void phy_sanitize_settings(struct phy_device *phydev)
{
u32 features = phydev->supported;
int idx;
@@ -256,31 +230,7 @@ static void phy_sanitize_settings(struct phy_device *phydev)
phydev->speed = settings[idx].speed;
phydev->duplex = settings[idx].duplex;
}
-
-/* phy_force_reduction
- *
- * description: Reduces the speed/duplex settings by
- * one notch. The order is so:
- * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
- * 10/FULL, 10/HALF. The function bottoms out at 10/HALF.
- */
-static void phy_force_reduction(struct phy_device *phydev)
-{
- int idx;
-
- idx = phy_find_setting(phydev->speed, phydev->duplex);
-
- idx++;
-
- idx = phy_find_valid(idx, phydev->supported);
-
- phydev->speed = settings[idx].speed;
- phydev->duplex = settings[idx].duplex;
-
- pr_info("Trying %d/%s\n", phydev->speed,
- DUPLEX_FULL == phydev->duplex ?
- "FULL" : "HALF");
-}
+EXPORT_SYMBOL(phy_sanitize_settings);
/* phy_ethtool_sset:
* A generic ethtool sset function. Handles all the details
@@ -291,6 +241,11 @@ static void phy_force_reduction(struct phy_device *phydev)
* - phy_start_aneg() will make sure forced settings are sane, and
* choose the next best ones from the ones selected, so we don't
* care if ethtool tries to give us bad values
+ *
+ * A note about the PHYCONTROL Layer. If you turn off
+ * CONFIG_PHYCONTROL, you will need to read the PHY status
+ * registers after this function completes, and update your
+ * controller manually.
*/
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
{
@@ -406,6 +361,51 @@ int phy_mii_ioctl(struct phy_device *phydev,
return 0;
}
+/* phy_start_aneg
+ *
+ * description: Sanitizes the settings (if we're not
+ * autonegotiating them), and then calls the driver's
+ * config_aneg function. If the PHYCONTROL Layer is operating,
+ * we change the state to reflect the beginning of
+ * Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ spin_lock(&phydev->lock);
+
+ if (AUTONEG_DISABLE == phydev->autoneg)
+ phy_sanitize_settings(phydev);
+
+ err = phydev->drv->config_aneg(phydev);
+
+#ifdef CONFIG_PHYCONTROL
+ if (err < 0)
+ goto out_unlock;
+
+ if (phydev->state != PHY_HALTED) {
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ phydev->state = PHY_AN;
+ phydev->link_timeout = PHY_AN_TIMEOUT;
+ } else {
+ phydev->state = PHY_FORCING;
+ phydev->link_timeout = PHY_FORCE_TIMEOUT;
+ }
+ }
+
+out_unlock:
+#endif
+ spin_unlock(&phydev->lock);
+ return err;
+}
+EXPORT_SYMBOL(phy_start_aneg);
+
+
+#ifdef CONFIG_PHYCONTROL
+static void phy_change(void *data);
+static void phy_timer(unsigned long data);
+
/* phy_start_machine:
*
* description: The PHY infrastructure can run a state machine
@@ -448,6 +448,32 @@ void phy_stop_machine(struct phy_device *phydev)
phydev->adjust_state = NULL;
}
+/* phy_force_reduction
+ *
+ * description: Reduces the speed/duplex settings by
+ * one notch. The order is so:
+ * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
+ * 10/FULL, 10/HALF. The function bottoms out at 10/HALF.
+ */
+static void phy_force_reduction(struct phy_device *phydev)
+{
+ int idx;
+
+ idx = phy_find_setting(phydev->speed, phydev->duplex);
+
+ idx++;
+
+ idx = phy_find_valid(idx, phydev->supported);
+
+ phydev->speed = settings[idx].speed;
+ phydev->duplex = settings[idx].duplex;
+
+ pr_info("Trying %d/%s\n", phydev->speed,
+ DUPLEX_FULL == phydev->duplex ?
+ "FULL" : "HALF");
+}
+
+
/* phy_error:
*
* Moves the PHY to the HALTED state in response to a read
@@ -462,22 +488,44 @@ void phy_error(struct phy_device *phydev)
spin_unlock(&phydev->lock);
}
-static int phy_stop_interrupts(struct phy_device *phydev)
+/* phy_interrupt
+ *
+ * description: When a PHY interrupt occurs, the handler disables
+ * interrupts, and schedules a work task to clear the interrupt.
+ */
+static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
+{
+ struct phy_device *phydev = phy_dat;
+
+ /* The MDIO bus is not allowed to be written in interrupt
+ * context, so we need to disable the irq here. A work
+ * queue will write the PHY to disable and clear the
+ * interrupt, and then reenable the irq line. */
+ disable_irq_nosync(irq);
+
+ schedule_work(&phydev->phy_queue);
+
+ return IRQ_HANDLED;
+}
+
+/* Enable the interrupts from the PHY side */
+int phy_enable_interrupts(struct phy_device *phydev)
{
int err;
- err = phy_disable_interrupts(phydev);
+ err = phy_clear_interrupt(phydev);
- if (err)
- phy_error(phydev);
+ if (err < 0)
+ return err;
- free_irq(phydev->irq, phydev);
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
return err;
}
+EXPORT_SYMBOL(phy_enable_interrupts);
/* Disable the PHY interrupts from the PHY side */
-static int phy_disable_interrupts(struct phy_device *phydev)
+int phy_disable_interrupts(struct phy_device *phydev)
{
int err;
@@ -500,6 +548,138 @@ phy_err:
return err;
}
+EXPORT_SYMBOL(phy_disable_interrupts);
+
+/* phy_start_interrupts
+ *
+ * description: Request the interrupt for the given PHY. If
+ * this fails, then we set irq to PHY_POLL.
+ * Otherwise, we enable the interrupts in the PHY.
+ * Returns 0 on success.
+ * This should only be called with a valid IRQ number.
+ */
+int phy_start_interrupts(struct phy_device *phydev)
+{
+ int err = 0;
+
+ INIT_WORK(&phydev->phy_queue, phy_change, phydev);
+
+ if (request_irq(phydev->irq, phy_interrupt,
+ SA_SHIRQ,
+ "phy_interrupt",
+ phydev) < 0) {
+ printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
+ phydev->bus->name,
+ phydev->irq);
+ phydev->irq = PHY_POLL;
+ return 0;
+ }
+
+ err = phy_enable_interrupts(phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_start_interrupts);
+
+int phy_stop_interrupts(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_disable_interrupts(phydev);
+
+ if (err)
+ phy_error(phydev);
+
+ free_irq(phydev->irq, phydev);
+
+ return err;
+}
+EXPORT_SYMBOL(phy_stop_interrupts);
+
+
+/* Scheduled by the phy_interrupt/timer to handle PHY changes */
+static void phy_change(void *data)
+{
+ int err;
+ struct phy_device *phydev = data;
+
+ err = phy_disable_interrupts(phydev);
+
+ if (err)
+ goto phy_err;
+
+ spin_lock(&phydev->lock);
+ if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
+ phydev->state = PHY_CHANGELINK;
+ spin_unlock(&phydev->lock);
+
+ enable_irq(phydev->irq);
+
+ /* Reenable interrupts */
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+
+ if (err)
+ goto irq_enable_err;
+
+ return;
+
+irq_enable_err:
+ disable_irq(phydev->irq);
+phy_err:
+ phy_error(phydev);
+}
+
+/* Bring down the PHY link, and stop checking the status. */
+void phy_stop(struct phy_device *phydev)
+{
+ spin_lock(&phydev->lock);
+
+ if (PHY_HALTED == phydev->state)
+ goto out_unlock;
+
+ if (phydev->irq != PHY_POLL) {
+ /* Clear any pending interrupts */
+ phy_clear_interrupt(phydev);
+
+ /* Disable PHY Interrupts */
+ phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+ }
+
+ phydev->state = PHY_HALTED;
+
+out_unlock:
+ spin_unlock(&phydev->lock);
+}
+
+
+/* phy_start
+ *
+ * description: Indicates the attached device's readiness to
+ * handle PHY-related work. Used during startup to start the
+ * PHY, and after a call to phy_stop() to resume operation.
+ * Also used to indicate the MDIO bus has cleared an error
+ * condition.
+ */
+void phy_start(struct phy_device *phydev)
+{
+ spin_lock(&phydev->lock);
+
+ switch (phydev->state) {
+ case PHY_STARTING:
+ phydev->state = PHY_PENDING;
+ break;
+ case PHY_READY:
+ phydev->state = PHY_UP;
+ break;
+ case PHY_HALTED:
+ phydev->state = PHY_RESUMING;
+ default:
+ break;
+ }
+ spin_unlock(&phydev->lock);
+}
+EXPORT_SYMBOL(phy_stop);
+EXPORT_SYMBOL(phy_start);
/* PHY timer which handles the state machine */
static void phy_timer(unsigned long data)
@@ -688,3 +868,4 @@ static void phy_timer(unsigned long data)
mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
}
+#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index c44d54f..33f7bdb 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -39,18 +39,9 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
-static int genphy_config_init(struct phy_device *phydev);
-
-static struct phy_driver genphy_driver = {
- .phy_id = 0xffffffff,
- .phy_id_mask = 0xffffffff,
- .name = "Generic PHY",
- .config_init = genphy_config_init,
- .features = 0,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .driver = {.owner = THIS_MODULE, },
-};
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
/* get_phy_device
*
@@ -110,6 +101,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
return dev;
}
+#ifdef CONFIG_PHYCONTROL
/* phy_prepare_link:
*
* description: Tells the PHY infrastructure to handle the
@@ -124,6 +116,132 @@ void phy_prepare_link(struct phy_device *phydev,
phydev->adjust_link = handler;
}
+/* phy_connect:
+ *
+ * description: Convenience function for connecting ethernet
+ * devices to PHY devices. The default behavior is for
+ * the PHY infrastructure to handle everything, and only notify
+ * the connected driver when the link status changes. If you
+ * don't want, or can't use the provided functionality, you may
+ * choose to call only the subset of functions which provide
+ * the desired functionality.
+ */
+struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
+ void (*handler)(struct net_device *), u32 flags)
+{
+ struct phy_device *phydev;
+
+ phydev = phy_attach(dev, phy_id, flags);
+
+ if (IS_ERR(phydev))
+ return phydev;
+
+ phy_prepare_link(phydev, handler);
+
+ phy_start_machine(phydev, NULL);
+
+ if (phydev->irq > 0)
+ phy_start_interrupts(phydev);
+
+ return phydev;
+}
+EXPORT_SYMBOL(phy_connect);
+
+void phy_disconnect(struct phy_device *phydev)
+{
+ if (phydev->irq > 0)
+ phy_stop_interrupts(phydev);
+
+ phy_stop_machine(phydev);
+
+ phydev->adjust_link = NULL;
+
+ phy_detach(phydev);
+}
+EXPORT_SYMBOL(phy_disconnect);
+
+#endif /* CONFIG_PHYCONTROL */
+
+/* phy_attach:
+ *
+ * description: Called by drivers to attach to a particular PHY
+ * device. The phy_device is found, and properly hooked up
+ * to the phy_driver. If no driver is attached, then the
+ * genphy_driver is used. The phy_device is given a ptr to
+ * the attaching device, and given a callback for link status
+ * change. The phy_device is returned to the attaching
+ * driver.
+ */
+static int phy_compare_id(struct device *dev, void *data)
+{
+ return strcmp((char *)data, dev->bus_id) ? 0 : 1;
+}
+
+struct phy_device *phy_attach(struct net_device *dev,
+ const char *phy_id, u32 flags)
+{
+ struct bus_type *bus = &mdio_bus_type;
+ struct phy_device *phydev;
+ struct device *d;
+
+ /* Search the list of PHY devices on the mdio bus for the
+ * PHY with the requested name */
+ d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
+
+ if (d) {
+ phydev = to_phy_device(d);
+ } else {
+ printk(KERN_ERR "%s not found\n", phy_id);
+ return ERR_PTR(-ENODEV);
+ }
+
+ /* Assume that if there is no driver, that it doesn't
+ * exist, and we should use the genphy driver. */
+ if (NULL == d->driver) {
+ int err;
+ down_write(&d->bus->subsys.rwsem);
+ d->driver = &genphy_driver.driver;
+
+ err = d->driver->probe(d);
+
+ if (err < 0)
+ return ERR_PTR(err);
+
+ device_bind_driver(d);
+ up_write(&d->bus->subsys.rwsem);
+ }
+
+ if (phydev->attached_dev) {
+ printk(KERN_ERR "%s: %s already attached\n",
+ dev->name, phy_id);
+ return ERR_PTR(-EBUSY);
+ }
+
+ phydev->attached_dev = dev;
+
+ phydev->dev_flags = flags;
+
+ return phydev;
+}
+EXPORT_SYMBOL(phy_attach);
+
+void phy_detach(struct phy_device *phydev)
+{
+ phydev->attached_dev = NULL;
+
+ /* If the device had no specific driver before (i.e. - it
+ * was using the generic driver), we unbind the device
+ * from the generic driver so that there's a chance a
+ * real driver could be loaded */
+ if (phydev->dev.driver == &genphy_driver.driver) {
+ down_write(&phydev->dev.bus->subsys.rwsem);
+ device_release_driver(&phydev->dev);
+ up_write(&phydev->dev.bus->subsys.rwsem);
+ }
+}
+EXPORT_SYMBOL(phy_detach);
+
+
/* Generic PHY support and helper functions */
/* genphy_config_advert
@@ -132,7 +250,7 @@ void phy_prepare_link(struct phy_device *phydev,
* after sanitizing the values to make sure we only advertise
* what is supported
*/
-static int genphy_config_advert(struct phy_device *phydev)
+int genphy_config_advert(struct phy_device *phydev)
{
u32 advertise;
int adv;
@@ -190,6 +308,7 @@ static int genphy_config_advert(struct phy_device *phydev)
return adv;
}
+EXPORT_SYMBOL(genphy_config_advert);
/* genphy_setup_forced
*
@@ -541,32 +660,37 @@ void phy_driver_unregister(struct phy_driver *drv)
}
EXPORT_SYMBOL(phy_driver_unregister);
+static struct phy_driver genphy_driver = {
+ .phy_id = 0xffffffff,
+ .phy_id_mask = 0xffffffff,
+ .name = "Generic PHY",
+ .config_init = genphy_config_init,
+ .features = 0,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = {.owner= THIS_MODULE, },
+};
static int __init phy_init(void)
{
int rc;
- extern int mdio_bus_init(void);
-
- rc = phy_driver_register(&genphy_driver);
- if (rc)
- goto out;
rc = mdio_bus_init();
if (rc)
- goto out_unreg;
+ return rc;
- return 0;
+ rc = phy_driver_register(&genphy_driver);
+ if (rc)
+ mdio_bus_exit();
-out_unreg:
- phy_driver_unregister(&genphy_driver);
-out:
return rc;
}
static void __exit phy_exit(void)
{
phy_driver_unregister(&genphy_driver);
+ mdio_bus_exit();
}
-module_init(phy_init);
+subsys_initcall(phy_init);
module_exit(phy_exit);
OpenPOWER on IntegriCloud