diff options
author | Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> | 2016-07-19 11:13:12 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-07-19 16:05:56 -0700 |
commit | 78301ebe9b5a2645d05aa7f791d068b727e7500f (patch) | |
tree | 2b61a5d5185b77b1f038d96ea19ebce21eb03cf4 /drivers/net/phy/marvell.c | |
parent | 2170fef78a400ca3c891da5db73db5e70388aba7 (diff) | |
download | op-kernel-dev-78301ebe9b5a2645d05aa7f791d068b727e7500f.zip op-kernel-dev-78301ebe9b5a2645d05aa7f791d068b727e7500f.tar.gz |
Marvell phy: add configuration of autonegociation for fiber link.
To be correctly initilized, the fiber interface needs
to be configured via autonegociation registers which use
some customs options or registers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/marvell.c')
-rw-r--r-- | drivers/net/phy/marvell.c | 111 |
1 files changed, 109 insertions, 2 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 0dde7ca..fb4d402 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -493,15 +493,122 @@ static int m88e1318_config_aneg(struct phy_device *phydev) return m88e1121_config_aneg(phydev); } +/** + * ethtool_adv_to_fiber_adv_t + * @ethadv: the ethtool advertisement settings + * + * A small helper function that translates ethtool advertisement + * settings to phy autonegotiation advertisements for the + * MII_ADV register for fiber link. + */ +static inline u32 ethtool_adv_to_fiber_adv_t(u32 ethadv) +{ + u32 result = 0; + + if (ethadv & ADVERTISED_1000baseT_Half) + result |= ADVERTISE_FIBER_1000HALF; + if (ethadv & ADVERTISED_1000baseT_Full) + result |= ADVERTISE_FIBER_1000FULL; + + if ((ethadv & ADVERTISE_PAUSE_ASYM) && (ethadv & ADVERTISE_PAUSE_CAP)) + result |= LPA_PAUSE_ASYM_FIBER; + else if (ethadv & ADVERTISE_PAUSE_CAP) + result |= (ADVERTISE_PAUSE_FIBER + & (~ADVERTISE_PAUSE_ASYM_FIBER)); + + return result; +} + +/** + * marvell_config_aneg_fiber - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. Adapted for fiber link in + * some Marvell's devices. + */ +static int marvell_config_aneg_fiber(struct phy_device *phydev) +{ + int changed = 0; + int err; + int adv, oldadv; + u32 advertise; + + if (phydev->autoneg != AUTONEG_ENABLE) + return genphy_setup_forced(phydev); + + /* Only allow advertising what this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup fiber advertisement */ + adv = phy_read(phydev, MII_ADVERTISE); + if (adv < 0) + return adv; + + oldadv = adv; + adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL + | LPA_PAUSE_FIBER); + adv |= ethtool_adv_to_fiber_adv_t(advertise); + + if (adv != oldadv) { + err = phy_write(phydev, MII_ADVERTISE, adv); + if (err < 0) + return err; + + changed = 1; + } + + if (changed == 0) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + changed = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. + */ + if (changed > 0) + changed = genphy_restart_aneg(phydev); + + return changed; +} + static int m88e1510_config_aneg(struct phy_device *phydev) { int err; + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER); + if (err < 0) + goto error; + + /* Configure the copper link first */ err = m88e1318_config_aneg(phydev); if (err < 0) - return err; + goto error; - return 0; + /* Then the fiber link */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER); + if (err < 0) + goto error; + + err = marvell_config_aneg_fiber(phydev); + if (err < 0) + goto error; + + return phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER); + +error: + phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_COPPER); + return err; } static int marvell_config_init(struct phy_device *phydev) |