3c*/acenic/typhoon: Move 3Com Ethernet drivers

Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary
Kconfig and Makefile changes.

Did not move the following drivers becuase they use a non-3Com
chipset: 3c503, 3c505, 3c507, 3c523 and 3c527

CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
CC: David Dillow <dave@thedillows.org>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Alan Cox <alan@linux.intel.com>
CC: David Hinds <dahinds@users.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David Dillow <dave@thedillows.org>

4 files changed, 0 insertions, 2144 deletions

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
deleted file mode 100644
index 34c5e1c..0000000
--- a/drivers/net/pcmcia/3c574_cs.c
+++ /dev/null
@@ -1,1181 +0,0 @@
-/* 3c574.c: A PCMCIA ethernet driver for the 3com 3c574 "RoadRunner".
-
-	Written 1993-1998 by
-	Donald Becker, becker@scyld.com, (driver core) and
-	David Hinds, dahinds@users.sourceforge.net (from his PC card code).
-	Locking fixes (C) Copyright 2003 Red Hat Inc
-
-	This software may be used and distributed according to the terms of
-	the GNU General Public License, incorporated herein by reference.
-
-	This driver derives from Donald Becker's 3c509 core, which has the
-	following copyright:
-	Copyright 1993 United States Government as represented by the
-	Director, National Security Agency.
-	
-
-*/
-
-/*
-				Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the 3Com 3c574 PC card Fast Ethernet
-Adapter.
-
-II. Board-specific settings
-
-None -- PC cards are autoconfigured.
-
-III. Driver operation
-
-The 3c574 uses a Boomerang-style interface, without the bus-master capability.
-See the Boomerang driver and documentation for most details.
-
-IV. Notes and chip documentation.
-
-Two added registers are used to enhance PIO performance, RunnerRdCtrl and
-RunnerWrCtrl.  These are 11 bit down-counters that are preloaded with the
-count of word (16 bits) reads or writes the driver is about to do to the Rx
-or Tx FIFO.  The chip is then able to hide the internal-PCI-bus to PC-card
-translation latency by buffering the I/O operations with an 8 word FIFO.
-Note: No other chip accesses are permitted when this buffer is used.
-
-A second enhancement is that both attribute and common memory space
-0x0800-0x0fff can translated to the PIO FIFO.  Thus memory operations (faster
-with *some* PCcard bridges) may be used instead of I/O operations.
-This is enabled by setting the 0x10 bit in the PCMCIA LAN COR.
-
-Some slow PC card bridges work better if they never see a WAIT signal.
-This is configured by setting the 0x20 bit in the PCMCIA LAN COR.
-Only do this after testing that it is reliable and improves performance.
-
-The upper five bits of RunnerRdCtrl are used to window into PCcard
-configuration space registers.  Window 0 is the regular Boomerang/Odie
-register set, 1-5 are various PC card control registers, and 16-31 are
-the (reversed!) CIS table.
-
-A final note: writing the InternalConfig register in window 3 with an
-invalid ramWidth is Very Bad.
-
-V. References
-
-http://www.scyld.com/expert/NWay.html
-http://www.national.com/opf/DP/DP83840A.html
-
-Thanks to Terry Murphy of 3Com for providing development information for
-earlier 3Com products.
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/bitops.h>
-#include <linux/mii.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("3Com 3c574 series PCMCIA ethernet driver");
-MODULE_LICENSE("GPL");
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-INT_MODULE_PARM(max_interrupt_work, 32);
-
-/* Force full duplex modes? */
-INT_MODULE_PARM(full_duplex, 0);
-
-/* Autodetect link polarity reversal? */
-INT_MODULE_PARM(auto_polarity, 1);
-
-
-/*====================================================================*/
-
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT  ((800*HZ)/1000)
-
-/* To minimize the size of the driver source and make the driver more
-   readable not all constants are symbolically defined.
-   You'll need the manual if you want to understand driver details anyway. */
-/* Offsets from base I/O address. */
-#define EL3_DATA	0x00
-#define EL3_CMD		0x0e
-#define EL3_STATUS	0x0e
-
-#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
-
-/* The top five bits written to EL3_CMD are a command, the lower
-   11 bits are the parameter, if applicable. */
-enum el3_cmds {
-	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
-	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
-	TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
-	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
-	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
-	SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
-	StatsDisable = 22<<11, StopCoax = 23<<11,
-};
-
-enum elxl_status {
-	IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
-	TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
-	IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000 };
-
-/* The SetRxFilter command accepts the following classes: */
-enum RxFilter {
-	RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
-};
-
-enum Window0 {
-	Wn0EepromCmd = 10, Wn0EepromData = 12, /* EEPROM command/address, data. */
-	IntrStatus=0x0E,		/* Valid in all windows. */
-};
-/* These assumes the larger EEPROM. */
-enum Win0_EEPROM_cmds {
-	EEPROM_Read = 0x200, EEPROM_WRITE = 0x100, EEPROM_ERASE = 0x300,
-	EEPROM_EWENB = 0x30,		/* Enable erasing/writing for 10 msec. */
-	EEPROM_EWDIS = 0x00,		/* Disable EWENB before 10 msec timeout. */
-};
-
-/* Register window 1 offsets, the window used in normal operation.
-   On the "Odie" this window is always mapped at offsets 0x10-0x1f.
-   Except for TxFree, which is overlapped by RunnerWrCtrl. */
-enum Window1 {
-	TX_FIFO = 0x10,  RX_FIFO = 0x10,  RxErrors = 0x14,
-	RxStatus = 0x18,  Timer=0x1A, TxStatus = 0x1B,
-	TxFree = 0x0C, /* Remaining free bytes in Tx buffer. */
-	RunnerRdCtrl = 0x16, RunnerWrCtrl = 0x1c,
-};
-
-enum Window3 {			/* Window 3: MAC/config bits. */
-	Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8,
-};
-enum wn3_config {
-	Ram_size = 7,
-	Ram_width = 8,
-	Ram_speed = 0x30,
-	Rom_size = 0xc0,
-	Ram_split_shift = 16,
-	Ram_split = 3 << Ram_split_shift,
-	Xcvr_shift = 20,
-	Xcvr = 7 << Xcvr_shift,
-	Autoselect = 0x1000000,
-};
-
-enum Window4 {		/* Window 4: Xcvr/media bits. */
-	Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
-};
-
-#define MEDIA_TP	0x00C0	/* Enable link beat and jabber for 10baseT. */
-
-struct el3_private {
-	struct pcmcia_device	*p_dev;
-	u16 advertising, partner;		/* NWay media advertisement */
-	unsigned char phys;			/* MII device address */
-	unsigned int autoselect:1, default_media:3;	/* Read from the EEPROM/Wn3_Config. */
-	/* for transceiver monitoring */
-	struct timer_list media;
-	unsigned short media_status;
-	unsigned short fast_poll;
-	unsigned long last_irq;
-	spinlock_t window_lock;			/* Guards the Window selection */
-};
-
-/* Set iff a MII transceiver on any interface requires mdio preamble.
-   This only set with the original DP83840 on older 3c905 boards, so the extra
-   code size of a per-interface flag is not worthwhile. */
-static char mii_preamble_required = 0;
-
-/* Index of functions. */
-
-static int tc574_config(struct pcmcia_device *link);
-static void tc574_release(struct pcmcia_device *link);
-
-static void mdio_sync(unsigned int ioaddr, int bits);
-static int mdio_read(unsigned int ioaddr, int phy_id, int location);
-static void mdio_write(unsigned int ioaddr, int phy_id, int location,
-		       int value);
-static unsigned short read_eeprom(unsigned int ioaddr, int index);
-static void tc574_wait_for_completion(struct net_device *dev, int cmd);
-
-static void tc574_reset(struct net_device *dev);
-static void media_check(unsigned long arg);
-static int el3_open(struct net_device *dev);
-static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
-					struct net_device *dev);
-static irqreturn_t el3_interrupt(int irq, void *dev_id);
-static void update_stats(struct net_device *dev);
-static struct net_device_stats *el3_get_stats(struct net_device *dev);
-static int el3_rx(struct net_device *dev, int worklimit);
-static int el3_close(struct net_device *dev);
-static void el3_tx_timeout(struct net_device *dev);
-static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void set_rx_mode(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-static void tc574_detach(struct pcmcia_device *p_dev);
-
-/*
-	tc574_attach() creates an "instance" of the driver, allocating
-	local data structures for one device.  The device is registered
-	with Card Services.
-*/
-static const struct net_device_ops el3_netdev_ops = {
-	.ndo_open 		= el3_open,
-	.ndo_stop 		= el3_close,
-	.ndo_start_xmit		= el3_start_xmit,
-	.ndo_tx_timeout 	= el3_tx_timeout,
-	.ndo_get_stats		= el3_get_stats,
-	.ndo_do_ioctl		= el3_ioctl,
-	.ndo_set_multicast_list = set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static int tc574_probe(struct pcmcia_device *link)
-{
-	struct el3_private *lp;
-	struct net_device *dev;
-
-	dev_dbg(&link->dev, "3c574_attach()\n");
-
-	/* Create the PC card device object. */
-	dev = alloc_etherdev(sizeof(struct el3_private));
-	if (!dev)
-		return -ENOMEM;
-	lp = netdev_priv(dev);
-	link->priv = dev;
-	lp->p_dev = link;
-
-	spin_lock_init(&lp->window_lock);
-	link->resource[0]->end = 32;
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
-	link->config_flags |= CONF_ENABLE_IRQ;
-	link->config_index = 1;
-
-	dev->netdev_ops = &el3_netdev_ops;
-	dev->watchdog_timeo = TX_TIMEOUT;
-
-	return tc574_config(link);
-}
-
-static void tc574_detach(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	dev_dbg(&link->dev, "3c574_detach()\n");
-
-	unregister_netdev(dev);
-
-	tc574_release(link);
-
-	free_netdev(dev);
-} /* tc574_detach */
-
-static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
-
-static int tc574_config(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-	struct el3_private *lp = netdev_priv(dev);
-	int ret, i, j;
-	unsigned int ioaddr;
-	__be16 *phys_addr;
-	char *cardname;
-	__u32 config;
-	u8 *buf;
-	size_t len;
-
-	phys_addr = (__be16 *)dev->dev_addr;
-
-	dev_dbg(&link->dev, "3c574_config()\n");
-
-	link->io_lines = 16;
-
-	for (i = j = 0; j < 0x400; j += 0x20) {
-		link->resource[0]->start = j ^ 0x300;
-		i = pcmcia_request_io(link);
-		if (i == 0)
-			break;
-	}
-	if (i != 0)
-		goto failed;
-
-	ret = pcmcia_request_irq(link, el3_interrupt);
-	if (ret)
-		goto failed;
-
-	ret = pcmcia_enable_device(link);
-	if (ret)
-		goto failed;
-
-	dev->irq = link->irq;
-	dev->base_addr = link->resource[0]->start;
-
-	ioaddr = dev->base_addr;
-
-	/* The 3c574 normally uses an EEPROM for configuration info, including
-	   the hardware address.  The future products may include a modem chip
-	   and put the address in the CIS. */
-
-	len = pcmcia_get_tuple(link, 0x88, &buf);
-	if (buf && len >= 6) {
-		for (i = 0; i < 3; i++)
-			phys_addr[i] = htons(le16_to_cpu(buf[i * 2]));
-		kfree(buf);
-	} else {
-		kfree(buf); /* 0 < len < 6 */
-		EL3WINDOW(0);
-		for (i = 0; i < 3; i++)
-			phys_addr[i] = htons(read_eeprom(ioaddr, i + 10));
-		if (phys_addr[0] == htons(0x6060)) {
-			pr_notice("IO port conflict at 0x%03lx-0x%03lx\n",
-				  dev->base_addr, dev->base_addr+15);
-			goto failed;
-		}
-	}
-	if (link->prod_id[1])
-		cardname = link->prod_id[1];
-	else
-		cardname = "3Com 3c574";
-
-	{
-		u_char mcr;
-		outw(2<<11, ioaddr + RunnerRdCtrl);
-		mcr = inb(ioaddr + 2);
-		outw(0<<11, ioaddr + RunnerRdCtrl);
-		pr_info("  ASIC rev %d,", mcr>>3);
-		EL3WINDOW(3);
-		config = inl(ioaddr + Wn3_Config);
-		lp->default_media = (config & Xcvr) >> Xcvr_shift;
-		lp->autoselect = config & Autoselect ? 1 : 0;
-	}
-
-	init_timer(&lp->media);
-
-	{
-		int phy;
-		
-		/* Roadrunner only: Turn on the MII transceiver */
-		outw(0x8040, ioaddr + Wn3_Options);
-		mdelay(1);
-		outw(0xc040, ioaddr + Wn3_Options);
-		tc574_wait_for_completion(dev, TxReset);
-		tc574_wait_for_completion(dev, RxReset);
-		mdelay(1);
-		outw(0x8040, ioaddr + Wn3_Options);
-		
-		EL3WINDOW(4);
-		for (phy = 1; phy <= 32; phy++) {
-			int mii_status;
-			mdio_sync(ioaddr, 32);
-			mii_status = mdio_read(ioaddr, phy & 0x1f, 1);
-			if (mii_status != 0xffff) {
-				lp->phys = phy & 0x1f;
-				dev_dbg(&link->dev, "  MII transceiver at "
-					"index %d, status %x.\n",
-					  phy, mii_status);
-				if ((mii_status & 0x0040) == 0)
-					mii_preamble_required = 1;
-				break;
-			}
-		}
-		if (phy > 32) {
-			pr_notice("  No MII transceivers found!\n");
-			goto failed;
-		}
-		i = mdio_read(ioaddr, lp->phys, 16) | 0x40;
-		mdio_write(ioaddr, lp->phys, 16, i);
-		lp->advertising = mdio_read(ioaddr, lp->phys, 4);
-		if (full_duplex) {
-			/* Only advertise the FD media types. */
-			lp->advertising &= ~0x02a0;
-			mdio_write(ioaddr, lp->phys, 4, lp->advertising);
-		}
-	}
-
-	SET_NETDEV_DEV(dev, &link->dev);
-
-	if (register_netdev(dev) != 0) {
-		pr_notice("register_netdev() failed\n");
-		goto failed;
-	}
-
-	netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n",
-		    cardname, dev->base_addr, dev->irq, dev->dev_addr);
-	netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n",
-		    8 << config & Ram_size,
-		    ram_split[(config & Ram_split) >> Ram_split_shift],
-		    config & Autoselect ? "autoselect " : "");
-
-	return 0;
-
-failed:
-	tc574_release(link);
-	return -ENODEV;
-
-} /* tc574_config */
-
-static void tc574_release(struct pcmcia_device *link)
-{
-	pcmcia_disable_device(link);
-}
-
-static int tc574_suspend(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	if (link->open)
-		netif_device_detach(dev);
-
-	return 0;
-}
-
-static int tc574_resume(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	if (link->open) {
-		tc574_reset(dev);
-		netif_device_attach(dev);
-	}
-
-	return 0;
-}
-
-static void dump_status(struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-	EL3WINDOW(1);
-	netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x, tx free %04x\n",
-		    inw(ioaddr+EL3_STATUS),
-		    inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
-		    inw(ioaddr+TxFree));
-	EL3WINDOW(4);
-	netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
-		    inw(ioaddr+0x04), inw(ioaddr+0x06),
-		    inw(ioaddr+0x08), inw(ioaddr+0x0a));
-	EL3WINDOW(1);
-}
-
-/*
-  Use this for commands that may take time to finish
-*/
-static void tc574_wait_for_completion(struct net_device *dev, int cmd)
-{
-	int i = 1500;
-	outw(cmd, dev->base_addr + EL3_CMD);
-	while (--i > 0)
-		if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
-	if (i == 0)
-		netdev_notice(dev, "command 0x%04x did not complete!\n", cmd);
-}
-
-/* Read a word from the EEPROM using the regular EEPROM access register.
-   Assume that we are in register window zero.
- */
-static unsigned short read_eeprom(unsigned int ioaddr, int index)
-{
-	int timer;
-	outw(EEPROM_Read + index, ioaddr + Wn0EepromCmd);
-	/* Pause for at least 162 usec for the read to take place. */
-	for (timer = 1620; timer >= 0; timer--) {
-		if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
-			break;
-	}
-	return inw(ioaddr + Wn0EepromData);
-}
-
-/* MII transceiver control section.
-   Read and write the MII registers using software-generated serial
-   MDIO protocol.  See the MII specifications or DP83840A data sheet
-   for details.
-   The maxium data clock rate is 2.5 Mhz.  The timing is easily met by the
-   slow PC card interface. */
-
-#define MDIO_SHIFT_CLK	0x01
-#define MDIO_DIR_WRITE	0x04
-#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
-#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
-#define MDIO_DATA_READ	0x02
-#define MDIO_ENB_IN		0x00
-
-/* Generate the preamble required for initial synchronization and
-   a few older transceivers. */
-static void mdio_sync(unsigned int ioaddr, int bits)
-{
-	unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
-
-	/* Establish sync by sending at least 32 logic ones. */
-	while (-- bits >= 0) {
-		outw(MDIO_DATA_WRITE1, mdio_addr);
-		outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
-	}
-}
-
-static int mdio_read(unsigned int ioaddr, int phy_id, int location)
-{
-	int i;
-	int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
-	unsigned int retval = 0;
-	unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
-
-	if (mii_preamble_required)
-		mdio_sync(ioaddr, 32);
-
-	/* Shift the read command bits out. */
-	for (i = 14; i >= 0; i--) {
-		int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
-		outw(dataval, mdio_addr);
-		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
-	}
-	/* Read the two transition, 16 data, and wire-idle bits. */
-	for (i = 19; i > 0; i--) {
-		outw(MDIO_ENB_IN, mdio_addr);
-		retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
-		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
-	}
-	return (retval>>1) & 0xffff;
-}
-
-static void mdio_write(unsigned int ioaddr, int phy_id, int location, int value)
-{
-	int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
-	unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
-	int i;
-
-	if (mii_preamble_required)
-		mdio_sync(ioaddr, 32);
-
-	/* Shift the command bits out. */
-	for (i = 31; i >= 0; i--) {
-		int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
-		outw(dataval, mdio_addr);
-		outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
-	}
-	/* Leave the interface idle. */
-	for (i = 1; i >= 0; i--) {
-		outw(MDIO_ENB_IN, mdio_addr);
-		outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
-	}
-}
-
-/* Reset and restore all of the 3c574 registers. */
-static void tc574_reset(struct net_device *dev)
-{
-	struct el3_private *lp = netdev_priv(dev);
-	int i;
-	unsigned int ioaddr = dev->base_addr;
-	unsigned long flags;
-
-	tc574_wait_for_completion(dev, TotalReset|0x10);
-
-	spin_lock_irqsave(&lp->window_lock, flags);
-	/* Clear any transactions in progress. */
-	outw(0, ioaddr + RunnerWrCtrl);
-	outw(0, ioaddr + RunnerRdCtrl);
-
-	/* Set the station address and mask. */
-	EL3WINDOW(2);
-	for (i = 0; i < 6; i++)
-		outb(dev->dev_addr[i], ioaddr + i);
-	for (; i < 12; i+=2)
-		outw(0, ioaddr + i);
-
-	/* Reset config options */
-	EL3WINDOW(3);
-	outb((dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
-	outl((lp->autoselect ? 0x01000000 : 0) | 0x0062001b,
-		 ioaddr + Wn3_Config);
-	/* Roadrunner only: Turn on the MII transceiver. */
-	outw(0x8040, ioaddr + Wn3_Options);
-	mdelay(1);
-	outw(0xc040, ioaddr + Wn3_Options);
-	EL3WINDOW(1);
-	spin_unlock_irqrestore(&lp->window_lock, flags);
-	
-	tc574_wait_for_completion(dev, TxReset);
-	tc574_wait_for_completion(dev, RxReset);
-	mdelay(1);
-	spin_lock_irqsave(&lp->window_lock, flags);
-	EL3WINDOW(3);
-	outw(0x8040, ioaddr + Wn3_Options);
-
-	/* Switch to the stats window, and clear all stats by reading. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
-	EL3WINDOW(6);
-	for (i = 0; i < 10; i++)
-		inb(ioaddr + i);
-	inw(ioaddr + 10);
-	inw(ioaddr + 12);
-	EL3WINDOW(4);
-	inb(ioaddr + 12);
-	inb(ioaddr + 13);
-
-	/* .. enable any extra statistics bits.. */
-	outw(0x0040, ioaddr + Wn4_NetDiag);
-	
-	EL3WINDOW(1);
-	spin_unlock_irqrestore(&lp->window_lock, flags);
-	
-	/* .. re-sync MII and re-fill what NWay is advertising. */
-	mdio_sync(ioaddr, 32);
-	mdio_write(ioaddr, lp->phys, 4, lp->advertising);
-	if (!auto_polarity) {
-		/* works for TDK 78Q2120 series MII's */
-		i = mdio_read(ioaddr, lp->phys, 16) | 0x20;
-		mdio_write(ioaddr, lp->phys, 16, i);
-	}
-
-	spin_lock_irqsave(&lp->window_lock, flags);
-	/* Switch to register set 1 for normal use, just for TxFree. */
-	set_rx_mode(dev);
-	spin_unlock_irqrestore(&lp->window_lock, flags);
-	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
-	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
-	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
-	/* Allow status bits to be seen. */
-	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
-	/* Ack all pending events, and set active indicator mask. */
-	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
-		 ioaddr + EL3_CMD);
-	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
-		 | AdapterFailure | RxEarly, ioaddr + EL3_CMD);
-}
-
-static int el3_open(struct net_device *dev)
-{
-	struct el3_private *lp = netdev_priv(dev);
-	struct pcmcia_device *link = lp->p_dev;
-
-	if (!pcmcia_dev_present(link))
-		return -ENODEV;
-	
-	link->open++;
-	netif_start_queue(dev);
-	
-	tc574_reset(dev);
-	lp->media.function = media_check;
-	lp->media.data = (unsigned long) dev;
-	lp->media.expires = jiffies + HZ;
-	add_timer(&lp->media);
-	
-	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
-		  dev->name, inw(dev->base_addr + EL3_STATUS));
-	
-	return 0;
-}
-
-static void el3_tx_timeout(struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-	
-	netdev_notice(dev, "Transmit timed out!\n");
-	dump_status(dev);
-	dev->stats.tx_errors++;
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	/* Issue TX_RESET and TX_START commands. */
-	tc574_wait_for_completion(dev, TxReset);
-	outw(TxEnable, ioaddr + EL3_CMD);
-	netif_wake_queue(dev);
-}
-
-static void pop_tx_status(struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-	int i;
-    
-	/* Clear the Tx status stack. */
-	for (i = 32; i > 0; i--) {
-		u_char tx_status = inb(ioaddr + TxStatus);
-		if (!(tx_status & 0x84))
-			break;
-		/* reset transmitter on jabber error or underrun */
-		if (tx_status & 0x30)
-			tc574_wait_for_completion(dev, TxReset);
-		if (tx_status & 0x38) {
-			pr_debug("%s: transmit error: status 0x%02x\n",
-				  dev->name, tx_status);
-			outw(TxEnable, ioaddr + EL3_CMD);
-			dev->stats.tx_aborted_errors++;
-		}
-		outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
-	}
-}
-
-static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
-					struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-	struct el3_private *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	pr_debug("%s: el3_start_xmit(length = %ld) called, "
-		  "status %4.4x.\n", dev->name, (long)skb->len,
-		  inw(ioaddr + EL3_STATUS));
-
-	spin_lock_irqsave(&lp->window_lock, flags);
-
-	dev->stats.tx_bytes += skb->len;
-
-	/* Put out the doubleword header... */
-	outw(skb->len, ioaddr + TX_FIFO);
-	outw(0, ioaddr + TX_FIFO);
-	/* ... and the packet rounded to a doubleword. */
-	outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2);
-
-	/* TxFree appears only in Window 1, not offset 0x1c. */
-	if (inw(ioaddr + TxFree) <= 1536) {
-		netif_stop_queue(dev);
-		/* Interrupt us when the FIFO has room for max-sized packet. 
-		   The threshold is in units of dwords. */
-		outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
-	}
-
-	pop_tx_status(dev);
-	spin_unlock_irqrestore(&lp->window_lock, flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-/* The EL3 interrupt handler. */
-static irqreturn_t el3_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *) dev_id;
-	struct el3_private *lp = netdev_priv(dev);
-	unsigned int ioaddr;
-	unsigned status;
-	int work_budget = max_interrupt_work;
-	int handled = 0;
-
-	if (!netif_device_present(dev))
-		return IRQ_NONE;
-	ioaddr = dev->base_addr;
-
-	pr_debug("%s: interrupt, status %4.4x.\n",
-		  dev->name, inw(ioaddr + EL3_STATUS));
-
-	spin_lock(&lp->window_lock);
-	
-	while ((status = inw(ioaddr + EL3_STATUS)) &
-		   (IntLatch | RxComplete | RxEarly | StatsFull)) {
-		if (!netif_device_present(dev) ||
-			((status & 0xe000) != 0x2000)) {
-			pr_debug("%s: Interrupt from dead card\n", dev->name);
-			break;
-		}
-
-		handled = 1;
-
-		if (status & RxComplete)
-			work_budget = el3_rx(dev, work_budget);
-
-		if (status & TxAvailable) {
-			pr_debug("  TX room bit was handled.\n");
-			/* There's room in the FIFO for a full-sized packet. */
-			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
-			netif_wake_queue(dev);
-		}
-
-		if (status & TxComplete)
-			pop_tx_status(dev);
-
-		if (status & (AdapterFailure | RxEarly | StatsFull)) {
-			/* Handle all uncommon interrupts. */
-			if (status & StatsFull)
-				update_stats(dev);
-			if (status & RxEarly) {
-				work_budget = el3_rx(dev, work_budget);
-				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
-			}
-			if (status & AdapterFailure) {
-				u16 fifo_diag;
-				EL3WINDOW(4);
-				fifo_diag = inw(ioaddr + Wn4_FIFODiag);
-				EL3WINDOW(1);
-				netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n",
-					      fifo_diag);
-				if (fifo_diag & 0x0400) {
-					/* Tx overrun */
-					tc574_wait_for_completion(dev, TxReset);
-					outw(TxEnable, ioaddr + EL3_CMD);
-				}
-				if (fifo_diag & 0x2000) {
-					/* Rx underrun */
-					tc574_wait_for_completion(dev, RxReset);
-					set_rx_mode(dev);
-					outw(RxEnable, ioaddr + EL3_CMD);
-				}
-				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
-			}
-		}
-
-		if (--work_budget < 0) {
-			pr_debug("%s: Too much work in interrupt, "
-				  "status %4.4x.\n", dev->name, status);
-			/* Clear all interrupts */
-			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
-			break;
-		}
-		/* Acknowledge the IRQ. */
-		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
-	}
-
-	pr_debug("%s: exiting interrupt, status %4.4x.\n",
-		  dev->name, inw(ioaddr + EL3_STATUS));
-		  
-	spin_unlock(&lp->window_lock);
-	return IRQ_RETVAL(handled);
-}
-
-/*
-    This timer serves two purposes: to check for missed interrupts
-	(and as a last resort, poll the NIC for events), and to monitor
-	the MII, reporting changes in cable status.
-*/
-static void media_check(unsigned long arg)
-{
-	struct net_device *dev = (struct net_device *) arg;
-	struct el3_private *lp = netdev_priv(dev);
-	unsigned int ioaddr = dev->base_addr;
-	unsigned long flags;
-	unsigned short /* cable, */ media, partner;
-
-	if (!netif_device_present(dev))
-		goto reschedule;
-	
-	/* Check for pending interrupt with expired latency timer: with
-	   this, we can limp along even if the interrupt is blocked */
-	if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) {
-		if (!lp->fast_poll)
-			netdev_info(dev, "interrupt(s) dropped!\n");
-
-		local_irq_save(flags);
-		el3_interrupt(dev->irq, dev);
-		local_irq_restore(flags);
-
-		lp->fast_poll = HZ;
-	}
-	if (lp->fast_poll) {
-		lp->fast_poll--;
-		lp->media.expires = jiffies + 2*HZ/100;
-		add_timer(&lp->media);
-		return;
-	}
-
-	spin_lock_irqsave(&lp->window_lock, flags);
-	EL3WINDOW(4);
-	media = mdio_read(ioaddr, lp->phys, 1);
-	partner = mdio_read(ioaddr, lp->phys, 5);
-	EL3WINDOW(1);
-	
-	if (media != lp->media_status) {
-		if ((media ^ lp->media_status) & 0x0004)
-			netdev_info(dev, "%s link beat\n",
-				    (lp->media_status & 0x0004) ? "lost" : "found");
-		if ((media ^ lp->media_status) & 0x0020) {
-			lp->partner = 0;
-			if (lp->media_status & 0x0020) {
-				netdev_info(dev, "autonegotiation restarted\n");
-			} else if (partner) {
-				partner &= lp->advertising;
-				lp->partner = partner;
-				netdev_info(dev, "autonegotiation complete: "
-					    "%dbaseT-%cD selected\n",
-					    (partner & 0x0180) ? 100 : 10,
-					    (partner & 0x0140) ? 'F' : 'H');
-			} else {
-				netdev_info(dev, "link partner did not autonegotiate\n");
-			}
-
-			EL3WINDOW(3);
-			outb((partner & 0x0140 ? 0x20 : 0) |
-				 (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
-			EL3WINDOW(1);
-
-		}
-		if (media & 0x0010)
-			netdev_info(dev, "remote fault detected\n");
-		if (media & 0x0002)
-			netdev_info(dev, "jabber detected\n");
-		lp->media_status = media;
-	}
-	spin_unlock_irqrestore(&lp->window_lock, flags);
-
-reschedule:
-	lp->media.expires = jiffies + HZ;
-	add_timer(&lp->media);
-}
-
-static struct net_device_stats *el3_get_stats(struct net_device *dev)
-{
-	struct el3_private *lp = netdev_priv(dev);
-
-	if (netif_device_present(dev)) {
-		unsigned long flags;
-		spin_lock_irqsave(&lp->window_lock, flags);
-		update_stats(dev);
-		spin_unlock_irqrestore(&lp->window_lock, flags);
-	}
-	return &dev->stats;
-}
-
-/*  Update statistics.
-	Surprisingly this need not be run single-threaded, but it effectively is.
-	The counters clear when read, so the adds must merely be atomic.
- */
-static void update_stats(struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-	u8 rx, tx, up;
-
-	pr_debug("%s: updating the statistics.\n", dev->name);
-
-	if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */
-		return;
-		
-	/* Unlike the 3c509 we need not turn off stats updates while reading. */
-	/* Switch to the stats window, and read everything. */
-	EL3WINDOW(6);
-	dev->stats.tx_carrier_errors 		+= inb(ioaddr + 0);
-	dev->stats.tx_heartbeat_errors		+= inb(ioaddr + 1);
-	/* Multiple collisions. */	   	inb(ioaddr + 2);
-	dev->stats.collisions			+= inb(ioaddr + 3);
-	dev->stats.tx_window_errors		+= inb(ioaddr + 4);
-	dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
-	dev->stats.tx_packets			+= inb(ioaddr + 6);
-	up		 			 = inb(ioaddr + 9);
-	dev->stats.tx_packets			+= (up&0x30) << 4;
-	/* Rx packets   */			   inb(ioaddr + 7);
-	/* Tx deferrals */			   inb(ioaddr + 8);
-	rx		 			 = inw(ioaddr + 10);
-	tx					 = inw(ioaddr + 12);
-
-	EL3WINDOW(4);
-	/* BadSSD */				   inb(ioaddr + 12);
-	up					 = inb(ioaddr + 13);
-
-	EL3WINDOW(1);
-}
-
-static int el3_rx(struct net_device *dev, int worklimit)
-{
-	unsigned int ioaddr = dev->base_addr;
-	short rx_status;
-	
-	pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
-		  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
-	while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
-			worklimit > 0) {
-		worklimit--;
-		if (rx_status & 0x4000) { /* Error, update stats. */
-			short error = rx_status & 0x3800;
-			dev->stats.rx_errors++;
-			switch (error) {
-			case 0x0000:	dev->stats.rx_over_errors++; break;
-			case 0x0800:	dev->stats.rx_length_errors++; break;
-			case 0x1000:	dev->stats.rx_frame_errors++; break;
-			case 0x1800:	dev->stats.rx_length_errors++; break;
-			case 0x2000:	dev->stats.rx_frame_errors++; break;
-			case 0x2800:	dev->stats.rx_crc_errors++; break;
-			}
-		} else {
-			short pkt_len = rx_status & 0x7ff;
-			struct sk_buff *skb;
-
-			skb = dev_alloc_skb(pkt_len+5);
-
-			pr_debug("  Receiving packet size %d status %4.4x.\n",
-				  pkt_len, rx_status);
-			if (skb != NULL) {
-				skb_reserve(skb, 2);
-				insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
-						((pkt_len+3)>>2));
-				skb->protocol = eth_type_trans(skb, dev);
-				netif_rx(skb);
-				dev->stats.rx_packets++;
-				dev->stats.rx_bytes += pkt_len;
-			} else {
-				pr_debug("%s: couldn't allocate a sk_buff of"
-					  " size %d.\n", dev->name, pkt_len);
-				dev->stats.rx_dropped++;
-			}
-		}
-		tc574_wait_for_completion(dev, RxDiscard);
-	}
-
-	return worklimit;
-}
-
-/* Provide ioctl() calls to examine the MII xcvr state. */
-static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct el3_private *lp = netdev_priv(dev);
-	unsigned int ioaddr = dev->base_addr;
-	struct mii_ioctl_data *data = if_mii(rq);
-	int phy = lp->phys & 0x1f;
-
-	pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
-		  dev->name, rq->ifr_ifrn.ifrn_name, cmd,
-		  data->phy_id, data->reg_num, data->val_in, data->val_out);
-
-	switch(cmd) {
-	case SIOCGMIIPHY:		/* Get the address of the PHY in use. */
-		data->phy_id = phy;
-	case SIOCGMIIREG:		/* Read the specified MII register. */
-		{
-			int saved_window;
-			unsigned long flags;
-
-			spin_lock_irqsave(&lp->window_lock, flags);
-			saved_window = inw(ioaddr + EL3_CMD) >> 13;
-			EL3WINDOW(4);
-			data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f,
-						  data->reg_num & 0x1f);
-			EL3WINDOW(saved_window);
-			spin_unlock_irqrestore(&lp->window_lock, flags);
-			return 0;
-		}
-	case SIOCSMIIREG:		/* Write the specified MII register */
-		{
-			int saved_window;
-                       unsigned long flags;
-
-			spin_lock_irqsave(&lp->window_lock, flags);
-			saved_window = inw(ioaddr + EL3_CMD) >> 13;
-			EL3WINDOW(4);
-			mdio_write(ioaddr, data->phy_id & 0x1f,
-				   data->reg_num & 0x1f, data->val_in);
-			EL3WINDOW(saved_window);
-			spin_unlock_irqrestore(&lp->window_lock, flags);
-			return 0;
-		}
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-/* The Odie chip has a 64 bin multicast filter, but the bit layout is not
-   documented.  Until it is we revert to receiving all multicast frames when
-   any multicast reception is desired.
-   Note: My other drivers emit a log message whenever promiscuous mode is
-   entered to help detect password sniffers.  This is less desirable on
-   typical PC card machines, so we omit the message.
-   */
-
-static void set_rx_mode(struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-
-	if (dev->flags & IFF_PROMISC)
-		outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
-			 ioaddr + EL3_CMD);
-	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
-		outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
-	else
-		outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
-}
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct el3_private *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&lp->window_lock, flags);
-	set_rx_mode(dev);
-	spin_unlock_irqrestore(&lp->window_lock, flags);
-}
-
-static int el3_close(struct net_device *dev)
-{
-	unsigned int ioaddr = dev->base_addr;
-	struct el3_private *lp = netdev_priv(dev);
-	struct pcmcia_device *link = lp->p_dev;
-
-	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
-	
-	if (pcmcia_dev_present(link)) {
-		unsigned long flags;
-
-		/* Turn off statistics ASAP.  We update lp->stats below. */
-		outw(StatsDisable, ioaddr + EL3_CMD);
-		
-		/* Disable the receiver and transmitter. */
-		outw(RxDisable, ioaddr + EL3_CMD);
-		outw(TxDisable, ioaddr + EL3_CMD);
-		
-		/* Note: Switching to window 0 may disable the IRQ. */
-		EL3WINDOW(0);
-		spin_lock_irqsave(&lp->window_lock, flags);
-		update_stats(dev);
-		spin_unlock_irqrestore(&lp->window_lock, flags);
-
-		/* force interrupts off */
-		outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
-	}
-
-	link->open--;
-	netif_stop_queue(dev);
-	del_timer_sync(&lp->media);
-
-	return 0;
-}
-
-static const struct pcmcia_device_id tc574_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
-
-static struct pcmcia_driver tc574_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "3c574_cs",
-	.probe		= tc574_probe,
-	.remove		= tc574_detach,
-	.id_table       = tc574_ids,
-	.suspend	= tc574_suspend,
-	.resume		= tc574_resume,
-};
-
-static int __init init_tc574(void)
-{
-	return pcmcia_register_driver(&tc574_driver);
-}
-
-static void __exit exit_tc574(void)
-{
-	pcmcia_unregister_driver(&tc574_driver);
-}
-
-module_init(init_tc574);
-module_exit(exit_tc574);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
deleted file mode 100644
index 4a1a358..0000000
--- a/drivers/net/pcmcia/3c589_cs.c
+++ /dev/null
@@ -1,943 +0,0 @@
-/*======================================================================
-
-    A PCMCIA ethernet driver for the 3com 3c589 card.
-
-    Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
-
-    3c589_cs.c 1.162 2001/10/13 00:08:50
-
-    The network driver code is based on Donald Becker's 3c589 code:
-
-    Written 1994 by Donald Becker.
-    Copyright 1993 United States Government as represented by the
-    Director, National Security Agency.  This software may be used and
-    distributed according to the terms of the GNU General Public License,
-    incorporated herein by reference.
-    Donald Becker may be reached at becker@scyld.com
-
-    Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
-
-======================================================================*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#define DRV_NAME	"3c589_cs"
-#define DRV_VERSION	"1.162-ac"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-/* To minimize the size of the driver source I only define operating
-   constants if they are used several times.  You'll need the manual
-   if you want to understand driver details. */
-/* Offsets from base I/O address. */
-#define EL3_DATA	0x00
-#define EL3_TIMER	0x0a
-#define EL3_CMD		0x0e
-#define EL3_STATUS	0x0e
-
-#define EEPROM_READ	0x0080
-#define EEPROM_BUSY	0x8000
-
-#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
-
-/* The top five bits written to EL3_CMD are a command, the lower
-   11 bits are the parameter, if applicable. */
-enum c509cmd {
-	TotalReset	= 0<<11,
-	SelectWindow	= 1<<11,
-	StartCoax	= 2<<11,
-	RxDisable	= 3<<11,
-	RxEnable	= 4<<11,
-	RxReset		= 5<<11,
-	RxDiscard	= 8<<11,
-	TxEnable	= 9<<11,
-	TxDisable	= 10<<11,
-	TxReset		= 11<<11,
-	FakeIntr	= 12<<11,
-	AckIntr		= 13<<11,
-	SetIntrEnb	= 14<<11,
-	SetStatusEnb	= 15<<11,
-	SetRxFilter	= 16<<11,
-	SetRxThreshold	= 17<<11,
-	SetTxThreshold	= 18<<11,
-	SetTxStart	= 19<<11,
-	StatsEnable	= 21<<11,
-	StatsDisable	= 22<<11,
-	StopCoax	= 23<<11
-};
-
-enum c509status {
-	IntLatch	= 0x0001,
-	AdapterFailure	= 0x0002,
-	TxComplete	= 0x0004,
-	TxAvailable	= 0x0008,
-	RxComplete	= 0x0010,
-	RxEarly		= 0x0020,
-	IntReq		= 0x0040,
-	StatsFull	= 0x0080,
-	CmdBusy		= 0x1000
-};
-
-/* The SetRxFilter command accepts the following classes: */
-enum RxFilter {
-	RxStation	= 1,
-	RxMulticast	= 2,
-	RxBroadcast	= 4,
-	RxProm		= 8
-};
-
-/* Register window 1 offsets, the window used in normal operation. */
-#define TX_FIFO		0x00
-#define RX_FIFO		0x00
-#define RX_STATUS	0x08
-#define TX_STATUS	0x0B
-#define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
-
-#define WN0_IRQ		0x08	/* Window 0: Set IRQ line in bits 12-15. */
-#define WN4_MEDIA	0x0A	/* Window 4: Various transcvr/media bits. */
-#define MEDIA_TP	0x00C0	/* Enable link beat and jabber for 10baseT. */
-#define MEDIA_LED	0x0001	/* Enable link light on 3C589E cards. */
-
-/* Time in jiffies before concluding Tx hung */
-#define TX_TIMEOUT	((400*HZ)/1000)
-
-struct el3_private {
-	struct pcmcia_device	*p_dev;
-	/* For transceiver monitoring */
-	struct timer_list	media;
-	u16			media_status;
-	u16			fast_poll;
-	unsigned long		last_irq;
-	spinlock_t		lock;
-};
-
-static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
-MODULE_LICENSE("GPL");
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-/* Special hook for setting if_port when module is loaded */
-INT_MODULE_PARM(if_port, 0);
-
-
-/*====================================================================*/
-
-static int tc589_config(struct pcmcia_device *link);
-static void tc589_release(struct pcmcia_device *link);
-
-static u16 read_eeprom(unsigned int ioaddr, int index);
-static void tc589_reset(struct net_device *dev);
-static void media_check(unsigned long arg);
-static int el3_config(struct net_device *dev, struct ifmap *map);
-static int el3_open(struct net_device *dev);
-static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
-					struct net_device *dev);
-static irqreturn_t el3_interrupt(int irq, void *dev_id);
-static void update_stats(struct net_device *dev);
-static struct net_device_stats *el3_get_stats(struct net_device *dev);
-static int el3_rx(struct net_device *dev);
-static int el3_close(struct net_device *dev);
-static void el3_tx_timeout(struct net_device *dev);
-static void set_rx_mode(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static const struct ethtool_ops netdev_ethtool_ops;
-
-static void tc589_detach(struct pcmcia_device *p_dev);
-
-static const struct net_device_ops el3_netdev_ops = {
-	.ndo_open		= el3_open,
-	.ndo_stop		= el3_close,
-	.ndo_start_xmit		= el3_start_xmit,
-	.ndo_tx_timeout		= el3_tx_timeout,
-	.ndo_set_config		= el3_config,
-	.ndo_get_stats		= el3_get_stats,
-	.ndo_set_multicast_list = set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static int tc589_probe(struct pcmcia_device *link)
-{
-    struct el3_private *lp;
-    struct net_device *dev;
-
-    dev_dbg(&link->dev, "3c589_attach()\n");
-
-    /* Create new ethernet device */
-    dev = alloc_etherdev(sizeof(struct el3_private));
-    if (!dev)
-	 return -ENOMEM;
-    lp = netdev_priv(dev);
-    link->priv = dev;
-    lp->p_dev = link;
-
-    spin_lock_init(&lp->lock);
-    link->resource[0]->end = 16;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
-
-    link->config_flags |= CONF_ENABLE_IRQ;
-    link->config_index = 1;
-
-    dev->netdev_ops = &el3_netdev_ops;
-    dev->watchdog_timeo = TX_TIMEOUT;
-
-    SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
-
-    return tc589_config(link);
-}
-
-static void tc589_detach(struct pcmcia_device *link)
-{
-    struct net_device *dev = link->priv;
-
-    dev_dbg(&link->dev, "3c589_detach\n");
-
-    unregister_netdev(dev);
-
-    tc589_release(link);
-
-    free_netdev(dev);
-} /* tc589_detach */
-
-static int tc589_config(struct pcmcia_device *link)
-{
-    struct net_device *dev = link->priv;
-    __be16 *phys_addr;
-    int ret, i, j, multi = 0, fifo;
-    unsigned int ioaddr;
-    static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
-    u8 *buf;
-    size_t len;
-
-    dev_dbg(&link->dev, "3c589_config\n");
-
-    phys_addr = (__be16 *)dev->dev_addr;
-    /* Is this a 3c562? */
-    if (link->manf_id != MANFID_3COM)
-	    dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
-    multi = (link->card_id == PRODID_3COM_3C562);
-
-    link->io_lines = 16;
-
-    /* For the 3c562, the base address must be xx00-xx7f */
-    for (i = j = 0; j < 0x400; j += 0x10) {
-	if (multi && (j & 0x80)) continue;
-	link->resource[0]->start = j ^ 0x300;
-	i = pcmcia_request_io(link);
-	if (i == 0)
-		break;
-    }
-    if (i != 0)
-	goto failed;
-
-    ret = pcmcia_request_irq(link, el3_interrupt);
-    if (ret)
-	    goto failed;
-
-    ret = pcmcia_enable_device(link);
-    if (ret)
-	    goto failed;
-
-    dev->irq = link->irq;
-    dev->base_addr = link->resource[0]->start;
-    ioaddr = dev->base_addr;
-    EL3WINDOW(0);
-
-    /* The 3c589 has an extra EEPROM for configuration info, including
-       the hardware address.  The 3c562 puts the address in the CIS. */
-    len = pcmcia_get_tuple(link, 0x88, &buf);
-    if (buf && len >= 6) {
-	    for (i = 0; i < 3; i++)
-		    phys_addr[i] = htons(le16_to_cpu(buf[i*2]));
-	    kfree(buf);
-    } else {
-	kfree(buf); /* 0 < len < 6 */
-	for (i = 0; i < 3; i++)
-	    phys_addr[i] = htons(read_eeprom(ioaddr, i));
-	if (phys_addr[0] == htons(0x6060)) {
-	    dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
-		    dev->base_addr, dev->base_addr+15);
-	    goto failed;
-	}
-    }
-
-    /* The address and resource configuration register aren't loaded from
-       the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */
-    outw(0x3f00, ioaddr + 8);
-    fifo = inl(ioaddr);
-
-    /* The if_port symbol can be set when the module is loaded */
-    if ((if_port >= 0) && (if_port <= 3))
-	dev->if_port = if_port;
-    else
-	dev_err(&link->dev, "invalid if_port requested\n");
-
-    SET_NETDEV_DEV(dev, &link->dev);
-
-    if (register_netdev(dev) != 0) {
-	    dev_err(&link->dev, "register_netdev() failed\n");
-	goto failed;
-    }
-
-    netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
-		(multi ? "562" : "589"), dev->base_addr, dev->irq,
-		dev->dev_addr);
-    netdev_info(dev, "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
-		(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
-		if_names[dev->if_port]);
-    return 0;
-
-failed:
-    tc589_release(link);
-    return -ENODEV;
-} /* tc589_config */
-
-static void tc589_release(struct pcmcia_device *link)
-{
-	pcmcia_disable_device(link);
-}
-
-static int tc589_suspend(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	if (link->open)
-		netif_device_detach(dev);
-
-	return 0;
-}
-
-static int tc589_resume(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	if (link->open) {
-		tc589_reset(dev);
-		netif_device_attach(dev);
-	}
-
-	return 0;
-}
-
-/*====================================================================*/
-
-/*
-  Use this for commands that may take time to finish
-*/
-static void tc589_wait_for_completion(struct net_device *dev, int cmd)
-{
-    int i = 100;
-    outw(cmd, dev->base_addr + EL3_CMD);
-    while (--i > 0)
-	if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
-    if (i == 0)
-	netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
-}
-
-/*
-  Read a word from the EEPROM using the regular EEPROM access register.
-  Assume that we are in register window zero.
-*/
-static u16 read_eeprom(unsigned int ioaddr, int index)
-{
-    int i;
-    outw(EEPROM_READ + index, ioaddr + 10);
-    /* Reading the eeprom takes 162 us */
-    for (i = 1620; i >= 0; i--)
-	if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
-	    break;
-    return inw(ioaddr + 12);
-}
-
-/*
-  Set transceiver type, perhaps to something other than what the user
-  specified in dev->if_port.
-*/
-static void tc589_set_xcvr(struct net_device *dev, int if_port)
-{
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned int ioaddr = dev->base_addr;
-
-    EL3WINDOW(0);
-    switch (if_port) {
-    case 0: case 1: outw(0, ioaddr + 6); break;
-    case 2: outw(3<<14, ioaddr + 6); break;
-    case 3: outw(1<<14, ioaddr + 6); break;
-    }
-    /* On PCMCIA, this just turns on the LED */
-    outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
-    /* 10baseT interface, enable link beat and jabber check. */
-    EL3WINDOW(4);
-    outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
-    EL3WINDOW(1);
-    if (if_port == 2)
-	lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
-    else
-	lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
-}
-
-static void dump_status(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-    EL3WINDOW(1);
-    netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x  tx free %04x\n",
-		inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
-		inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
-    EL3WINDOW(4);
-    netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
-		inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
-		inw(ioaddr+0x0a));
-    EL3WINDOW(1);
-}
-
-/* Reset and restore all of the 3c589 registers. */
-static void tc589_reset(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-    int i;
-
-    EL3WINDOW(0);
-    outw(0x0001, ioaddr + 4);			/* Activate board. */
-    outw(0x3f00, ioaddr + 8);			/* Set the IRQ line. */
-
-    /* Set the station address in window 2. */
-    EL3WINDOW(2);
-    for (i = 0; i < 6; i++)
-	outb(dev->dev_addr[i], ioaddr + i);
-
-    tc589_set_xcvr(dev, dev->if_port);
-
-    /* Switch to the stats window, and clear all stats by reading. */
-    outw(StatsDisable, ioaddr + EL3_CMD);
-    EL3WINDOW(6);
-    for (i = 0; i < 9; i++)
-	inb(ioaddr+i);
-    inw(ioaddr + 10);
-    inw(ioaddr + 12);
-
-    /* Switch to register set 1 for normal use. */
-    EL3WINDOW(1);
-
-    set_rx_mode(dev);
-    outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
-    outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
-    outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
-    /* Allow status bits to be seen. */
-    outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
-    /* Ack all pending events, and set active indicator mask. */
-    outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
-	 ioaddr + EL3_CMD);
-    outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
-	 | AdapterFailure, ioaddr + EL3_CMD);
-}
-
-static void netdev_get_drvinfo(struct net_device *dev,
-			       struct ethtool_drvinfo *info)
-{
-	strcpy(info->driver, DRV_NAME);
-	strcpy(info->version, DRV_VERSION);
-	sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
-	.get_drvinfo		= netdev_get_drvinfo,
-};
-
-static int el3_config(struct net_device *dev, struct ifmap *map)
-{
-    if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
-	if (map->port <= 3) {
-	    dev->if_port = map->port;
-	    netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
-	    tc589_set_xcvr(dev, dev->if_port);
-	} else
-	    return -EINVAL;
-    }
-    return 0;
-}
-
-static int el3_open(struct net_device *dev)
-{
-    struct el3_private *lp = netdev_priv(dev);
-    struct pcmcia_device *link = lp->p_dev;
-
-    if (!pcmcia_dev_present(link))
-	return -ENODEV;
-
-    link->open++;
-    netif_start_queue(dev);
-
-    tc589_reset(dev);
-    init_timer(&lp->media);
-    lp->media.function = media_check;
-    lp->media.data = (unsigned long) dev;
-    lp->media.expires = jiffies + HZ;
-    add_timer(&lp->media);
-
-    dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
-	  dev->name, inw(dev->base_addr + EL3_STATUS));
-
-    return 0;
-}
-
-static void el3_tx_timeout(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-
-    netdev_warn(dev, "Transmit timed out!\n");
-    dump_status(dev);
-    dev->stats.tx_errors++;
-    dev->trans_start = jiffies; /* prevent tx timeout */
-    /* Issue TX_RESET and TX_START commands. */
-    tc589_wait_for_completion(dev, TxReset);
-    outw(TxEnable, ioaddr + EL3_CMD);
-    netif_wake_queue(dev);
-}
-
-static void pop_tx_status(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-    int i;
-
-    /* Clear the Tx status stack. */
-    for (i = 32; i > 0; i--) {
-	u_char tx_status = inb(ioaddr + TX_STATUS);
-	if (!(tx_status & 0x84)) break;
-	/* reset transmitter on jabber error or underrun */
-	if (tx_status & 0x30)
-		tc589_wait_for_completion(dev, TxReset);
-	if (tx_status & 0x38) {
-		netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
-		outw(TxEnable, ioaddr + EL3_CMD);
-		dev->stats.tx_aborted_errors++;
-	}
-	outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
-    }
-}
-
-static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
-					struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-    struct el3_private *priv = netdev_priv(dev);
-    unsigned long flags;
-
-    netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
-	       (long)skb->len, inw(ioaddr + EL3_STATUS));
-
-    spin_lock_irqsave(&priv->lock, flags);
-
-    dev->stats.tx_bytes += skb->len;
-
-    /* Put out the doubleword header... */
-    outw(skb->len, ioaddr + TX_FIFO);
-    outw(0x00, ioaddr + TX_FIFO);
-    /* ... and the packet rounded to a doubleword. */
-    outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
-
-    if (inw(ioaddr + TX_FREE) <= 1536) {
-	netif_stop_queue(dev);
-	/* Interrupt us when the FIFO has room for max-sized packet. */
-	outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
-    }
-
-    pop_tx_status(dev);
-    spin_unlock_irqrestore(&priv->lock, flags);
-    dev_kfree_skb(skb);
-
-    return NETDEV_TX_OK;
-}
-
-/* The EL3 interrupt handler. */
-static irqreturn_t el3_interrupt(int irq, void *dev_id)
-{
-    struct net_device *dev = (struct net_device *) dev_id;
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned int ioaddr;
-    __u16 status;
-    int i = 0, handled = 1;
-
-    if (!netif_device_present(dev))
-	return IRQ_NONE;
-
-    ioaddr = dev->base_addr;
-
-    netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
-
-    spin_lock(&lp->lock);
-    while ((status = inw(ioaddr + EL3_STATUS)) &
-	(IntLatch | RxComplete | StatsFull)) {
-	if ((status & 0xe000) != 0x2000) {
-		netdev_dbg(dev, "interrupt from dead card\n");
-		handled = 0;
-		break;
-	}
-	if (status & RxComplete)
-		el3_rx(dev);
-	if (status & TxAvailable) {
-		netdev_dbg(dev, "    TX room bit was handled.\n");
-		/* There's room in the FIFO for a full-sized packet. */
-		outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
-		netif_wake_queue(dev);
-	}
-	if (status & TxComplete)
-		pop_tx_status(dev);
-	if (status & (AdapterFailure | RxEarly | StatsFull)) {
-	    /* Handle all uncommon interrupts. */
-	    if (status & StatsFull)		/* Empty statistics. */
-		update_stats(dev);
-	    if (status & RxEarly) {		/* Rx early is unused. */
-		el3_rx(dev);
-		outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
-	    }
-	    if (status & AdapterFailure) {
-		u16 fifo_diag;
-		EL3WINDOW(4);
-		fifo_diag = inw(ioaddr + 4);
-		EL3WINDOW(1);
-		netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
-			    fifo_diag);
-		if (fifo_diag & 0x0400) {
-		    /* Tx overrun */
-		    tc589_wait_for_completion(dev, TxReset);
-		    outw(TxEnable, ioaddr + EL3_CMD);
-		}
-		if (fifo_diag & 0x2000) {
-		    /* Rx underrun */
-		    tc589_wait_for_completion(dev, RxReset);
-		    set_rx_mode(dev);
-		    outw(RxEnable, ioaddr + EL3_CMD);
-		}
-		outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
-	    }
-	}
-	if (++i > 10) {
-		netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
-			   status);
-		/* Clear all interrupts */
-		outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
-		break;
-	}
-	/* Acknowledge the IRQ. */
-	outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
-    }
-    lp->last_irq = jiffies;
-    spin_unlock(&lp->lock);
-    netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
-	       inw(ioaddr + EL3_STATUS));
-    return IRQ_RETVAL(handled);
-}
-
-static void media_check(unsigned long arg)
-{
-    struct net_device *dev = (struct net_device *)(arg);
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned int ioaddr = dev->base_addr;
-    u16 media, errs;
-    unsigned long flags;
-
-    if (!netif_device_present(dev)) goto reschedule;
-
-    /* Check for pending interrupt with expired latency timer: with
-       this, we can limp along even if the interrupt is blocked */
-    if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
-	(inb(ioaddr + EL3_TIMER) == 0xff)) {
-	if (!lp->fast_poll)
-		netdev_warn(dev, "interrupt(s) dropped!\n");
-
-	local_irq_save(flags);
-	el3_interrupt(dev->irq, dev);
-	local_irq_restore(flags);
-
-	lp->fast_poll = HZ;
-    }
-    if (lp->fast_poll) {
-	lp->fast_poll--;
-	lp->media.expires = jiffies + HZ/100;
-	add_timer(&lp->media);
-	return;
-    }
-
-    /* lp->lock guards the EL3 window. Window should always be 1 except
-       when the lock is held */
-    spin_lock_irqsave(&lp->lock, flags);
-    EL3WINDOW(4);
-    media = inw(ioaddr+WN4_MEDIA) & 0xc810;
-
-    /* Ignore collisions unless we've had no irq's recently */
-    if (time_before(jiffies, lp->last_irq + HZ)) {
-	media &= ~0x0010;
-    } else {
-	/* Try harder to detect carrier errors */
-	EL3WINDOW(6);
-	outw(StatsDisable, ioaddr + EL3_CMD);
-	errs = inb(ioaddr + 0);
-	outw(StatsEnable, ioaddr + EL3_CMD);
-	dev->stats.tx_carrier_errors += errs;
-	if (errs || (lp->media_status & 0x0010)) media |= 0x0010;
-    }
-
-    if (media != lp->media_status) {
-	if ((media & lp->media_status & 0x8000) &&
-	    ((lp->media_status ^ media) & 0x0800))
-		netdev_info(dev, "%s link beat\n",
-			    (lp->media_status & 0x0800 ? "lost" : "found"));
-	else if ((media & lp->media_status & 0x4000) &&
-		 ((lp->media_status ^ media) & 0x0010))
-		netdev_info(dev, "coax cable %s\n",
-			    (lp->media_status & 0x0010 ? "ok" : "problem"));
-	if (dev->if_port == 0) {
-	    if (media & 0x8000) {
-		if (media & 0x0800)
-			netdev_info(dev, "flipped to 10baseT\n");
-		else
-			tc589_set_xcvr(dev, 2);
-	    } else if (media & 0x4000) {
-		if (media & 0x0010)
-		    tc589_set_xcvr(dev, 1);
-		else
-		    netdev_info(dev, "flipped to 10base2\n");
-	    }
-	}
-	lp->media_status = media;
-    }
-
-    EL3WINDOW(1);
-    spin_unlock_irqrestore(&lp->lock, flags);
-
-reschedule:
-    lp->media.expires = jiffies + HZ;
-    add_timer(&lp->media);
-}
-
-static struct net_device_stats *el3_get_stats(struct net_device *dev)
-{
-    struct el3_private *lp = netdev_priv(dev);
-    unsigned long flags;
-    struct pcmcia_device *link = lp->p_dev;
-
-    if (pcmcia_dev_present(link)) {
-	spin_lock_irqsave(&lp->lock, flags);
-	update_stats(dev);
-	spin_unlock_irqrestore(&lp->lock, flags);
-    }
-    return &dev->stats;
-}
-
-/*
-  Update statistics.  We change to register window 6, so this should be run
-  single-threaded if the device is active. This is expected to be a rare
-  operation, and it's simpler for the rest of the driver to assume that
-  window 1 is always valid rather than use a special window-state variable.
-
-  Caller must hold the lock for this
-*/
-static void update_stats(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-
-    netdev_dbg(dev, "updating the statistics.\n");
-    /* Turn off statistics updates while reading. */
-    outw(StatsDisable, ioaddr + EL3_CMD);
-    /* Switch to the stats window, and read everything. */
-    EL3WINDOW(6);
-    dev->stats.tx_carrier_errors	+= inb(ioaddr + 0);
-    dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
-    /* Multiple collisions. */		inb(ioaddr + 2);
-    dev->stats.collisions		+= inb(ioaddr + 3);
-    dev->stats.tx_window_errors		+= inb(ioaddr + 4);
-    dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
-    dev->stats.tx_packets		+= inb(ioaddr + 6);
-    /* Rx packets   */			inb(ioaddr + 7);
-    /* Tx deferrals */			inb(ioaddr + 8);
-    /* Rx octets */			inw(ioaddr + 10);
-    /* Tx octets */			inw(ioaddr + 12);
-
-    /* Back to window 1, and turn statistics back on. */
-    EL3WINDOW(1);
-    outw(StatsEnable, ioaddr + EL3_CMD);
-}
-
-static int el3_rx(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-    int worklimit = 32;
-    short rx_status;
-
-    netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
-	       inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
-    while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
-		    worklimit > 0) {
-	worklimit--;
-	if (rx_status & 0x4000) { /* Error, update stats. */
-	    short error = rx_status & 0x3800;
-	    dev->stats.rx_errors++;
-	    switch (error) {
-	    case 0x0000:	dev->stats.rx_over_errors++; break;
-	    case 0x0800:	dev->stats.rx_length_errors++; break;
-	    case 0x1000:	dev->stats.rx_frame_errors++; break;
-	    case 0x1800:	dev->stats.rx_length_errors++; break;
-	    case 0x2000:	dev->stats.rx_frame_errors++; break;
-	    case 0x2800:	dev->stats.rx_crc_errors++; break;
-	    }
-	} else {
-	    short pkt_len = rx_status & 0x7ff;
-	    struct sk_buff *skb;
-
-	    skb = dev_alloc_skb(pkt_len+5);
-
-	    netdev_dbg(dev, "    Receiving packet size %d status %4.4x.\n",
-		       pkt_len, rx_status);
-	    if (skb != NULL) {
-		skb_reserve(skb, 2);
-		insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
-			(pkt_len+3)>>2);
-		skb->protocol = eth_type_trans(skb, dev);
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += pkt_len;
-	    } else {
-		netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
-			   pkt_len);
-		dev->stats.rx_dropped++;
-	    }
-	}
-	/* Pop the top of the Rx FIFO */
-	tc589_wait_for_completion(dev, RxDiscard);
-    }
-    if (worklimit == 0)
-	netdev_warn(dev, "too much work in el3_rx!\n");
-    return 0;
-}
-
-static void set_rx_mode(struct net_device *dev)
-{
-    unsigned int ioaddr = dev->base_addr;
-    u16 opts = SetRxFilter | RxStation | RxBroadcast;
-
-    if (dev->flags & IFF_PROMISC)
-	opts |= RxMulticast | RxProm;
-    else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
-	opts |= RxMulticast;
-    outw(opts, ioaddr + EL3_CMD);
-}
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct el3_private *priv = netdev_priv(dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	set_rx_mode(dev);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int el3_close(struct net_device *dev)
-{
-    struct el3_private *lp = netdev_priv(dev);
-    struct pcmcia_device *link = lp->p_dev;
-    unsigned int ioaddr = dev->base_addr;
-
-    dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
-
-    if (pcmcia_dev_present(link)) {
-	/* Turn off statistics ASAP.  We update dev->stats below. */
-	outw(StatsDisable, ioaddr + EL3_CMD);
-
-	/* Disable the receiver and transmitter. */
-	outw(RxDisable, ioaddr + EL3_CMD);
-	outw(TxDisable, ioaddr + EL3_CMD);
-
-	if (dev->if_port == 2)
-	    /* Turn off thinnet power.  Green! */
-	    outw(StopCoax, ioaddr + EL3_CMD);
-	else if (dev->if_port == 1) {
-	    /* Disable link beat and jabber */
-	    EL3WINDOW(4);
-	    outw(0, ioaddr + WN4_MEDIA);
-	}
-
-	/* Switching back to window 0 disables the IRQ. */
-	EL3WINDOW(0);
-	/* But we explicitly zero the IRQ line select anyway. */
-	outw(0x0f00, ioaddr + WN0_IRQ);
-
-	/* Check if the card still exists */
-	if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
-	    update_stats(dev);
-    }
-
-    link->open--;
-    netif_stop_queue(dev);
-    del_timer_sync(&lp->media);
-
-    return 0;
-}
-
-static const struct pcmcia_device_id tc589_ids[] = {
-	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562),
-	PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
-	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
-	PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
-	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
-
-static struct pcmcia_driver tc589_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "3c589_cs",
-	.probe		= tc589_probe,
-	.remove		= tc589_detach,
-	.id_table	= tc589_ids,
-	.suspend	= tc589_suspend,
-	.resume		= tc589_resume,
-};
-
-static int __init init_tc589(void)
-{
-	return pcmcia_register_driver(&tc589_driver);
-}
-
-static void __exit exit_tc589(void)
-{
-	pcmcia_unregister_driver(&tc589_driver);
-}
-
-module_init(init_tc589);
-module_exit(exit_tc589);
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 9b8f793..b67c5ed 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,24 +21,6 @@ menuconfig NET_PCMCIA
 
 if NET_PCMCIA && PCMCIA
 
-config PCMCIA_3C589
-	tristate "3Com 3c589 PCMCIA support"
-	help
-	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
-	  (PC-card) Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called 3c589_cs.  If unsure, say N.
-
-config PCMCIA_3C574
-	tristate "3Com 3c574 PCMCIA support"
-	help
-	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
-	  (PC-card) Fast Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called 3c574_cs.  If unsure, say N.
-
 config PCMCIA_FMVJ18X
 	tristate "Fujitsu FMV-J18x PCMCIA support"
 	select CRC32
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index 87d2d99..2f2ab3b 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,8 +3,6 @@
 #
 
 # 16-bit client drivers
-obj-$(CONFIG_PCMCIA_3C589)	+= 3c589_cs.o
-obj-$(CONFIG_PCMCIA_3C574)	+= 3c574_cs.o
 obj-$(CONFIG_PCMCIA_FMVJ18X)	+= fmvj18x_cs.o
 obj-$(CONFIG_PCMCIA_NMCLAN)	+= nmclan_cs.o
 obj-$(CONFIG_PCMCIA_PCNET)	+= pcnet_cs.o