summaryrefslogtreecommitdiffstats
path: root/drivers/net/pcmcia
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-04-02 06:20:12 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-10 19:54:25 -0700
commit644570b830266ff33ff5f3542b9c838f93a55ea6 (patch)
treeb19c680ce1b1e4cd15465c74aa335459068c033f /drivers/net/pcmcia
parentb955f6ca776f3bab3d1e2c5fb1d247b203cbda14 (diff)
downloadop-kernel-dev-644570b830266ff33ff5f3542b9c838f93a55ea6.zip
op-kernel-dev-644570b830266ff33ff5f3542b9c838f93a55ea6.tar.gz
8390: Move the 8390 related drivers
Moves the drivers for the National Semi-conductor 8390 chipset into drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile changes. CC: Donald Becker <becker@scyld.com> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Alain Malek <alain.malek@cryogen.com> CC: Peter De Schrijver <p2@mind.be> CC: "David Huggins-Daines" <dhd@debian.org> CC: Wim Dumon <wimpie@kotnet.org> CC: Yoshinori Sato <ysato@users.sourceforge.jp> CC: David Hinds <dahinds@users.sourceforge.net> CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/pcmcia')
-rw-r--r--drivers/net/pcmcia/Kconfig21
-rw-r--r--drivers/net/pcmcia/Makefile2
-rw-r--r--drivers/net/pcmcia/axnet_cs.c1725
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c1710
4 files changed, 0 insertions, 3458 deletions
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index e17ad95..72aa257 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -31,16 +31,6 @@ config PCMCIA_FMVJ18X
To compile this driver as a module, choose M here: the module will be
called fmvj18x_cs. If unsure, say N.
-config PCMCIA_PCNET
- tristate "NE2000 compatible PCMCIA support"
- select CRC32
- help
- Say Y here if you intend to attach an NE2000 compatible PCMCIA
- (PC-card) Ethernet or Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called pcnet_cs. If unsure, say N.
-
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
select CRC32
@@ -61,17 +51,6 @@ config PCMCIA_XIRC2PS
To compile this driver as a module, choose M here: the module will be
called xirc2ps_cs. If unsure, say N.
-config PCMCIA_AXNET
- tristate "Asix AX88190 PCMCIA support"
- ---help---
- Say Y here if you intend to attach an Asix AX88190-based PCMCIA
- (PC-card) Fast Ethernet card to your computer. These cards are
- nearly NE2000 compatible but need a separate driver due to a few
- misfeatures.
-
- To compile this driver as a module, choose M here: the module will be
- called axnet_cs. If unsure, say N.
-
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
depends on ARCNET_COM20020
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index 985f0ae..c2b8b44 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -4,10 +4,8 @@
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
-obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o
obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
-obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o
obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
deleted file mode 100644
index 9953db7..0000000
--- a/drivers/net/pcmcia/axnet_cs.c
+++ /dev/null
@@ -1,1725 +0,0 @@
-/*======================================================================
-
- A PCMCIA ethernet driver for Asix AX88190-based cards
-
- The Asix AX88190 is a NS8390-derived chipset with a few nasty
- idiosyncracies that make it very inconvenient to support with a
- standard 8390 driver. This driver is based on pcnet_cs, with the
- tweaked 8390 code grafted on the end. Much of what I did was to
- clean up and update a similar driver supplied by Asix, which was
- adapted by William Lee, william@asix.com.tw.
-
- Copyright (C) 2001 David A. Hinds -- dahinds@users.sourceforge.net
-
- axnet_cs.c 1.28 2002/06/29 06:27:37
-
- The network driver code is based on Donald Becker's NE2000 code:
-
- Written 1992,1993 by Donald Becker.
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency. This software may be used and
- distributed according to the terms of the GNU General Public License,
- incorporated herein by reference.
- Donald Becker may be reached at becker@scyld.com
-
-======================================================================*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-#include "../8390.h"
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-
-#define AXNET_CMD 0x00
-#define AXNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
-#define AXNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
-#define AXNET_MII_EEP 0x14 /* Offset of MII access port */
-#define AXNET_TEST 0x15 /* Offset of TEST Register port */
-#define AXNET_GPIO 0x17 /* Offset of General Purpose Register Port */
-
-#define AXNET_START_PG 0x40 /* First page of TX buffer */
-#define AXNET_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-#define AXNET_RDC_TIMEOUT 0x02 /* Max wait in jiffies for Tx RDC */
-
-#define IS_AX88190 0x0001
-#define IS_AX88790 0x0002
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver");
-MODULE_LICENSE("GPL");
-
-
-/*====================================================================*/
-
-static int axnet_config(struct pcmcia_device *link);
-static void axnet_release(struct pcmcia_device *link);
-static int axnet_open(struct net_device *dev);
-static int axnet_close(struct net_device *dev);
-static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static netdev_tx_t axnet_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-static struct net_device_stats *get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void axnet_tx_timeout(struct net_device *dev);
-static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
-static void ei_watchdog(u_long arg);
-static void axnet_reset_8390(struct net_device *dev);
-
-static int mdio_read(unsigned int addr, int phy_id, int loc);
-static void mdio_write(unsigned int addr, int phy_id, int loc, int value);
-
-static void get_8390_hdr(struct net_device *,
- struct e8390_pkt_hdr *, int);
-static void block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void block_output(struct net_device *dev, int count,
- const u_char *buf, const int start_page);
-
-static void axnet_detach(struct pcmcia_device *p_dev);
-
-static void AX88190_init(struct net_device *dev, int startp);
-static int ax_open(struct net_device *dev);
-static int ax_close(struct net_device *dev);
-static irqreturn_t ax_interrupt(int irq, void *dev_id);
-
-/*====================================================================*/
-
-typedef struct axnet_dev_t {
- struct pcmcia_device *p_dev;
- caddr_t base;
- struct timer_list watchdog;
- int stale, fast_poll;
- u_short link_status;
- u_char duplex_flag;
- int phy_id;
- int flags;
- int active_low;
-} axnet_dev_t;
-
-static inline axnet_dev_t *PRIV(struct net_device *dev)
-{
- void *p = (char *)netdev_priv(dev) + sizeof(struct ei_device);
- return p;
-}
-
-static const struct net_device_ops axnet_netdev_ops = {
- .ndo_open = axnet_open,
- .ndo_stop = axnet_close,
- .ndo_do_ioctl = axnet_ioctl,
- .ndo_start_xmit = axnet_start_xmit,
- .ndo_tx_timeout = axnet_tx_timeout,
- .ndo_get_stats = get_stats,
- .ndo_set_multicast_list = set_multicast_list,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int axnet_probe(struct pcmcia_device *link)
-{
- axnet_dev_t *info;
- struct net_device *dev;
- struct ei_device *ei_local;
-
- dev_dbg(&link->dev, "axnet_attach()\n");
-
- dev = alloc_etherdev(sizeof(struct ei_device) + sizeof(axnet_dev_t));
- if (!dev)
- return -ENOMEM;
-
- ei_local = netdev_priv(dev);
- spin_lock_init(&ei_local->page_lock);
-
- info = PRIV(dev);
- info->p_dev = link;
- link->priv = dev;
- link->config_flags |= CONF_ENABLE_IRQ;
-
- dev->netdev_ops = &axnet_netdev_ops;
-
- dev->watchdog_timeo = TX_TIMEOUT;
-
- return axnet_config(link);
-} /* axnet_attach */
-
-static void axnet_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link);
-
- unregister_netdev(dev);
-
- axnet_release(link);
-
- free_netdev(dev);
-} /* axnet_detach */
-
-/*======================================================================
-
- This probes for a card's hardware address by reading the PROM.
-
-======================================================================*/
-
-static int get_prom(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- unsigned int ioaddr = dev->base_addr;
- int i, j;
-
- /* This is based on drivers/net/ne.c */
- struct {
- u_char value, offset;
- } program_seq[] = {
- {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
- {0x01, EN0_DCFG}, /* Set word-wide access. */
- {0x00, EN0_RCNTLO}, /* Clear the count regs. */
- {0x00, EN0_RCNTHI},
- {0x00, EN0_IMR}, /* Mask completion irq. */
- {0xFF, EN0_ISR},
- {E8390_RXOFF|0x40, EN0_RXCR}, /* 0x60 Set to monitor */
- {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
- {0x10, EN0_RCNTLO},
- {0x00, EN0_RCNTHI},
- {0x00, EN0_RSARLO}, /* DMA starting at 0x0400. */
- {0x04, EN0_RSARHI},
- {E8390_RREAD+E8390_START, E8390_CMD},
- };
-
- /* Not much of a test, but the alternatives are messy */
- if (link->config_base != 0x03c0)
- return 0;
-
- axnet_reset_8390(dev);
- mdelay(10);
-
- for (i = 0; i < ARRAY_SIZE(program_seq); i++)
- outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
-
- for (i = 0; i < 6; i += 2) {
- j = inw(ioaddr + AXNET_DATAPORT);
- dev->dev_addr[i] = j & 0xff;
- dev->dev_addr[i+1] = j >> 8;
- }
- return 1;
-} /* get_prom */
-
-static int try_io_port(struct pcmcia_device *link)
-{
- int j, ret;
- link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- if (link->resource[0]->end == 32) {
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- /* for master/slave multifunction cards */
- if (link->resource[1]->end > 0)
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- } else {
- /* This should be two 16-port windows */
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
- }
- if (link->resource[0]->start == 0) {
- for (j = 0; j < 0x400; j += 0x20) {
- link->resource[0]->start = j ^ 0x300;
- link->resource[1]->start = (j ^ 0x300) + 0x10;
- link->io_lines = 16;
- ret = pcmcia_request_io(link);
- if (ret == 0)
- return ret;
- }
- return ret;
- } else {
- return pcmcia_request_io(link);
- }
-}
-
-static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data)
-{
- if (p_dev->config_index == 0)
- return -EINVAL;
-
- p_dev->config_index = 0x05;
- if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
- return -ENODEV;
-
- return try_io_port(p_dev);
-}
-
-static int axnet_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- axnet_dev_t *info = PRIV(dev);
- int i, j, j2, ret;
-
- dev_dbg(&link->dev, "axnet_config(0x%p)\n", link);
-
- /* don't trust the CIS on this; Linksys got it wrong */
- link->config_regs = 0x63;
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
- ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
- if (ret != 0)
- goto failed;
-
- if (!link->irq)
- goto failed;
-
- if (resource_size(link->resource[1]) == 8)
- link->config_flags |= CONF_ENABLE_SPKR;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- dev->irq = link->irq;
- dev->base_addr = link->resource[0]->start;
-
- if (!get_prom(link)) {
- pr_notice("this is not an AX88190 card!\n");
- pr_notice("use pcnet_cs instead.\n");
- goto failed;
- }
-
- ei_status.name = "AX88190";
- ei_status.word16 = 1;
- ei_status.tx_start_page = AXNET_START_PG;
- ei_status.rx_start_page = AXNET_START_PG + TX_PAGES;
- ei_status.stop_page = AXNET_STOP_PG;
- ei_status.reset_8390 = axnet_reset_8390;
- ei_status.get_8390_hdr = get_8390_hdr;
- ei_status.block_input = block_input;
- ei_status.block_output = block_output;
-
- if (inb(dev->base_addr + AXNET_TEST) != 0)
- info->flags |= IS_AX88790;
- else
- info->flags |= IS_AX88190;
-
- if (info->flags & IS_AX88790)
- outb(0x10, dev->base_addr + AXNET_GPIO); /* select Internal PHY */
-
- info->active_low = 0;
-
- for (i = 0; i < 32; i++) {
- j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
- j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
- if (j == j2) continue;
- if ((j != 0) && (j != 0xffff)) break;
- }
-
- if (i == 32) {
- /* Maybe PHY is in power down mode. (PPD_SET = 1)
- Bit 2 of CCSR is active low. */
- pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
- for (i = 0; i < 32; i++) {
- j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
- j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
- if (j == j2) continue;
- if ((j != 0) && (j != 0xffff)) {
- info->active_low = 1;
- break;
- }
- }
- }
-
- info->phy_id = (i < 32) ? i : -1;
- SET_NETDEV_DEV(dev, &link->dev);
-
- if (register_netdev(dev) != 0) {
- pr_notice("register_netdev() failed\n");
- goto failed;
- }
-
- netdev_info(dev, "Asix AX88%d90: io %#3lx, irq %d, hw_addr %pM\n",
- ((info->flags & IS_AX88790) ? 7 : 1),
- dev->base_addr, dev->irq, dev->dev_addr);
- if (info->phy_id != -1) {
- netdev_dbg(dev, " MII transceiver at index %d, status %x\n",
- info->phy_id, j);
- } else {
- netdev_notice(dev, " No MII transceivers found!\n");
- }
- return 0;
-
-failed:
- axnet_release(link);
- return -ENODEV;
-} /* axnet_config */
-
-static void axnet_release(struct pcmcia_device *link)
-{
- pcmcia_disable_device(link);
-}
-
-static int axnet_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open)
- netif_device_detach(dev);
-
- return 0;
-}
-
-static int axnet_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- axnet_dev_t *info = PRIV(dev);
-
- if (link->open) {
- if (info->active_low == 1)
- pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
-
- axnet_reset_8390(dev);
- AX88190_init(dev, 1);
- netif_device_attach(dev);
- }
-
- return 0;
-}
-
-
-/*======================================================================
-
- MII interface support
-
-======================================================================*/
-
-#define MDIO_SHIFT_CLK 0x01
-#define MDIO_DATA_WRITE0 0x00
-#define MDIO_DATA_WRITE1 0x08
-#define MDIO_DATA_READ 0x04
-#define MDIO_MASK 0x0f
-#define MDIO_ENB_IN 0x02
-
-static void mdio_sync(unsigned int addr)
-{
- int bits;
- for (bits = 0; bits < 32; bits++) {
- outb_p(MDIO_DATA_WRITE1, addr);
- outb_p(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
- }
-}
-
-static int mdio_read(unsigned int addr, int phy_id, int loc)
-{
- u_int cmd = (0xf6<<10)|(phy_id<<5)|loc;
- int i, retval = 0;
-
- mdio_sync(addr);
- for (i = 14; i >= 0; i--) {
- int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
- outb_p(dat, addr);
- outb_p(dat | MDIO_SHIFT_CLK, addr);
- }
- for (i = 19; i > 0; i--) {
- outb_p(MDIO_ENB_IN, addr);
- retval = (retval << 1) | ((inb_p(addr) & MDIO_DATA_READ) != 0);
- outb_p(MDIO_ENB_IN | MDIO_SHIFT_CLK, addr);
- }
- return (retval>>1) & 0xffff;
-}
-
-static void mdio_write(unsigned int addr, int phy_id, int loc, int value)
-{
- u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
- int i;
-
- mdio_sync(addr);
- for (i = 31; i >= 0; i--) {
- int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
- outb_p(dat, addr);
- outb_p(dat | MDIO_SHIFT_CLK, addr);
- }
- for (i = 1; i >= 0; i--) {
- outb_p(MDIO_ENB_IN, addr);
- outb_p(MDIO_ENB_IN | MDIO_SHIFT_CLK, addr);
- }
-}
-
-/*====================================================================*/
-
-static int axnet_open(struct net_device *dev)
-{
- int ret;
- axnet_dev_t *info = PRIV(dev);
- struct pcmcia_device *link = info->p_dev;
- unsigned int nic_base = dev->base_addr;
-
- dev_dbg(&link->dev, "axnet_open('%s')\n", dev->name);
-
- if (!pcmcia_dev_present(link))
- return -ENODEV;
-
- outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
- ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev);
- if (ret)
- return ret;
-
- link->open++;
-
- info->link_status = 0x00;
- init_timer(&info->watchdog);
- info->watchdog.function = ei_watchdog;
- info->watchdog.data = (u_long)dev;
- info->watchdog.expires = jiffies + HZ;
- add_timer(&info->watchdog);
-
- return ax_open(dev);
-} /* axnet_open */
-
-/*====================================================================*/
-
-static int axnet_close(struct net_device *dev)
-{
- axnet_dev_t *info = PRIV(dev);
- struct pcmcia_device *link = info->p_dev;
-
- dev_dbg(&link->dev, "axnet_close('%s')\n", dev->name);
-
- ax_close(dev);
- free_irq(dev->irq, dev);
-
- link->open--;
- netif_stop_queue(dev);
- del_timer_sync(&info->watchdog);
-
- return 0;
-} /* axnet_close */
-
-/*======================================================================
-
- Hard reset the card. This used to pause for the same period that
- a 8390 reset command required, but that shouldn't be necessary.
-
-======================================================================*/
-
-static void axnet_reset_8390(struct net_device *dev)
-{
- unsigned int nic_base = dev->base_addr;
- int i;
-
- ei_status.txing = ei_status.dmaing = 0;
-
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
-
- outb(inb(nic_base + AXNET_RESET), nic_base + AXNET_RESET);
-
- for (i = 0; i < 100; i++) {
- if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
- break;
- udelay(100);
- }
- outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
-
- if (i == 100)
- netdev_err(dev, "axnet_reset_8390() did not complete\n");
-
-} /* axnet_reset_8390 */
-
-/*====================================================================*/
-
-static irqreturn_t ei_irq_wrapper(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- PRIV(dev)->stale = 0;
- return ax_interrupt(irq, dev_id);
-}
-
-static void ei_watchdog(u_long arg)
-{
- struct net_device *dev = (struct net_device *)(arg);
- axnet_dev_t *info = PRIV(dev);
- unsigned int nic_base = dev->base_addr;
- unsigned int mii_addr = nic_base + AXNET_MII_EEP;
- u_short link;
-
- if (!netif_device_present(dev)) goto reschedule;
-
- /* Check for pending interrupt with expired latency timer: with
- this, we can limp along even if the interrupt is blocked */
- if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
- if (!info->fast_poll)
- netdev_info(dev, "interrupt(s) dropped!\n");
- ei_irq_wrapper(dev->irq, dev);
- info->fast_poll = HZ;
- }
- if (info->fast_poll) {
- info->fast_poll--;
- info->watchdog.expires = jiffies + 1;
- add_timer(&info->watchdog);
- return;
- }
-
- if (info->phy_id < 0)
- goto reschedule;
- link = mdio_read(mii_addr, info->phy_id, 1);
- if (!link || (link == 0xffff)) {
- netdev_info(dev, "MII is missing!\n");
- info->phy_id = -1;
- goto reschedule;
- }
-
- link &= 0x0004;
- if (link != info->link_status) {
- u_short p = mdio_read(mii_addr, info->phy_id, 5);
- netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
- if (link) {
- info->duplex_flag = (p & 0x0140) ? 0x80 : 0x00;
- if (p)
- netdev_info(dev, "autonegotiation complete: %dbaseT-%cD selected\n",
- (p & 0x0180) ? 100 : 10, (p & 0x0140) ? 'F' : 'H');
- else
- netdev_info(dev, "link partner did not autonegotiate\n");
- AX88190_init(dev, 1);
- }
- info->link_status = link;
- }
-
-reschedule:
- info->watchdog.expires = jiffies + HZ;
- add_timer(&info->watchdog);
-}
-
-/*====================================================================*/
-
-static int axnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- axnet_dev_t *info = PRIV(dev);
- struct mii_ioctl_data *data = if_mii(rq);
- unsigned int mii_addr = dev->base_addr + AXNET_MII_EEP;
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = info->phy_id;
- case SIOCGMIIREG: /* Read MII PHY register. */
- data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f);
- return 0;
- case SIOCSMIIREG: /* Write MII PHY register. */
- mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in);
- return 0;
- }
- return -EOPNOTSUPP;
-}
-
-/*====================================================================*/
-
-static void get_8390_hdr(struct net_device *dev,
- struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- unsigned int nic_base = dev->base_addr;
-
- outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
- outb_p(ring_page, nic_base + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
-
- insw(nic_base + AXNET_DATAPORT, hdr,
- sizeof(struct e8390_pkt_hdr)>>1);
- /* Fix for big endian systems */
- hdr->count = le16_to_cpu(hdr->count);
-
-}
-
-/*====================================================================*/
-
-static void block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset)
-{
- unsigned int nic_base = dev->base_addr;
- int xfer_count = count;
- char *buf = skb->data;
-
- if ((ei_debug > 4) && (count != 4))
- pr_debug("%s: [bi=%d]\n", dev->name, count+4);
- outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
- outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
-
- insw(nic_base + AXNET_DATAPORT,buf,count>>1);
- if (count & 0x01)
- buf[count-1] = inb(nic_base + AXNET_DATAPORT), xfer_count++;
-
-}
-
-/*====================================================================*/
-
-static void block_output(struct net_device *dev, int count,
- const u_char *buf, const int start_page)
-{
- unsigned int nic_base = dev->base_addr;
-
- pr_debug("%s: [bo=%d]\n", dev->name, count);
-
- /* Round the count up for word writes. Do we need to do this?
- What effect will an odd byte count have on the 8390?
- I should check someday. */
- if (count & 0x01)
- count++;
-
- outb_p(0x00, nic_base + EN0_RSARLO);
- outb_p(start_page, nic_base + EN0_RSARHI);
- outb_p(E8390_RWRITE+E8390_START, nic_base + AXNET_CMD);
- outsw(nic_base + AXNET_DATAPORT, buf, count>>1);
-}
-
-static const struct pcmcia_device_id axnet_ids[] = {
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x016c, 0x0081),
- PCMCIA_DEVICE_MANF_CARD(0x018a, 0x0301),
- PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0301),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0303),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
- PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
- PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202),
- PCMCIA_DEVICE_MANF_CARD(0xffff, 0x1090),
- PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
- PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
- PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
- PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1),
- PCMCIA_DEVICE_PROD_ID12("CHEETAH ETHERCARD", "EN2228", 0x00fa7bc8, 0x00e990cc),
- PCMCIA_DEVICE_PROD_ID12("CNet", "CNF301", 0xbc477dde, 0x78c5f40b),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXM", 0x5261440f, 0x3abbd061),
- PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058),
- PCMCIA_DEVICE_PROD_ID14("Network Everywhere", "AX88190", 0x820a67b6, 0xab9be5ef),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, axnet_ids);
-
-static struct pcmcia_driver axnet_cs_driver = {
- .owner = THIS_MODULE,
- .name = "axnet_cs",
- .probe = axnet_probe,
- .remove = axnet_detach,
- .id_table = axnet_ids,
- .suspend = axnet_suspend,
- .resume = axnet_resume,
-};
-
-static int __init init_axnet_cs(void)
-{
- return pcmcia_register_driver(&axnet_cs_driver);
-}
-
-static void __exit exit_axnet_cs(void)
-{
- pcmcia_unregister_driver(&axnet_cs_driver);
-}
-
-module_init(init_axnet_cs);
-module_exit(exit_axnet_cs);
-
-/*====================================================================*/
-
-/* 8390.c: A general NS8390 ethernet driver core for linux. */
-/*
- Written 1992-94 by Donald Becker.
-
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation
- 410 Severn Ave., Suite 210
- Annapolis MD 21403
-
- This is the chip-specific code for many 8390-based ethernet adaptors.
- This is not a complete driver, it must be combined with board-specific
- code such as ne.c, wd.c, 3c503.c, etc.
-
- Seeing how at least eight drivers use this code, (not counting the
- PCMCIA ones either) it is easy to break some card by what seems like
- a simple innocent change. Please contact me or Donald if you think
- you have found something that needs changing. -- PG
-
- Changelog:
-
- Paul Gortmaker : remove set_bit lock, other cleanups.
- Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to
- ei_block_input() for eth_io_copy_and_sum().
- Paul Gortmaker : exchange static int ei_pingpong for a #define,
- also add better Tx error handling.
- Paul Gortmaker : rewrite Rx overrun handling as per NS specs.
- Alexey Kuznetsov : use the 8390's six bit hash multicast filter.
- Paul Gortmaker : tweak ANK's above multicast changes a bit.
- Paul Gortmaker : update packet statistics for v2.1.x
- Alan Cox : support arbitrary stupid port mappings on the
- 68K Macintosh. Support >16bit I/O spaces
- Paul Gortmaker : add kmod support for auto-loading of the 8390
- module by all drivers that require it.
- Alan Cox : Spinlocking work, added 'BUG_83C690'
- Paul Gortmaker : Separate out Tx timeout code from Tx path.
-
- Sources:
- The National Semiconductor LAN Databook, and the 3Com 3c503 databook.
-
- */
-
-#include <linux/bitops.h>
-#include <asm/irq.h>
-#include <linux/fcntl.h>
-#include <linux/in.h>
-#include <linux/interrupt.h>
-
-#define BUG_83C690
-
-/* These are the operational function interfaces to board-specific
- routines.
- void reset_8390(struct net_device *dev)
- Resets the board associated with DEV, including a hardware reset of
- the 8390. This is only called when there is a transmit timeout, and
- it is always followed by 8390_init().
- void block_output(struct net_device *dev, int count, const unsigned char *buf,
- int start_page)
- Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The
- "page" value uses the 8390's 256-byte pages.
- void get_8390_hdr(struct net_device *dev, struct e8390_hdr *hdr, int ring_page)
- Read the 4 byte, page aligned 8390 header. *If* there is a
- subsequent read, it will be of the rest of the packet.
- void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
- Read COUNT bytes from the packet buffer into the skb data area. Start
- reading from RING_OFFSET, the address as the 8390 sees it. This will always
- follow the read of the 8390 header.
-*/
-#define ei_reset_8390 (ei_local->reset_8390)
-#define ei_block_output (ei_local->block_output)
-#define ei_block_input (ei_local->block_input)
-#define ei_get_8390_hdr (ei_local->get_8390_hdr)
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef ei_debug
-int ei_debug = 1;
-#endif
-
-/* Index to functions. */
-static void ei_tx_intr(struct net_device *dev);
-static void ei_tx_err(struct net_device *dev);
-static void ei_receive(struct net_device *dev);
-static void ei_rx_overrun(struct net_device *dev);
-
-/* Routines generic to NS8390-based boards. */
-static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
- int start_page);
-static void do_set_multicast_list(struct net_device *dev);
-
-/*
- * SMP and the 8390 setup.
- *
- * The 8390 isn't exactly designed to be multithreaded on RX/TX. There is
- * a page register that controls bank and packet buffer access. We guard
- * this with ei_local->page_lock. Nobody should assume or set the page other
- * than zero when the lock is not held. Lock holders must restore page 0
- * before unlocking. Even pure readers must take the lock to protect in
- * page 0.
- *
- * To make life difficult the chip can also be very slow. We therefore can't
- * just use spinlocks. For the longer lockups we disable the irq the device
- * sits on and hold the lock. We must hold the lock because there is a dual
- * processor case other than interrupts (get stats/set multicast list in
- * parallel with each other and transmit).
- *
- * Note: in theory we can just disable the irq on the card _but_ there is
- * a latency on SMP irq delivery. So we can easily go "disable irq" "sync irqs"
- * enter lock, take the queued irq. So we waddle instead of flying.
- *
- * Finally by special arrangement for the purpose of being generally
- * annoying the transmit function is called bh atomic. That places
- * restrictions on the user context callers as disable_irq won't save
- * them.
- */
-
-/**
- * ax_open - Open/initialize the board.
- * @dev: network device to initialize
- *
- * This routine goes all-out, setting everything
- * up anew at each open, even though many of these registers should only
- * need to be set once at boot.
- */
-static int ax_open(struct net_device *dev)
-{
- unsigned long flags;
- struct ei_device *ei_local = netdev_priv(dev);
-
- /*
- * Grab the page lock so we own the register set, then call
- * the init function.
- */
-
- spin_lock_irqsave(&ei_local->page_lock, flags);
- AX88190_init(dev, 1);
- /* Set the flag before we drop the lock, That way the IRQ arrives
- after its set and we get no silly warnings */
- netif_start_queue(dev);
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- ei_local->irqlock = 0;
- return 0;
-}
-
-#define dev_lock(dev) (((struct ei_device *)netdev_priv(dev))->page_lock)
-
-/**
- * ax_close - shut down network device
- * @dev: network device to close
- *
- * Opposite of ax_open(). Only used when "ifconfig <devname> down" is done.
- */
-static int ax_close(struct net_device *dev)
-{
- unsigned long flags;
-
- /*
- * Hold the page lock during close
- */
-
- spin_lock_irqsave(&dev_lock(dev), flags);
- AX88190_init(dev, 0);
- spin_unlock_irqrestore(&dev_lock(dev), flags);
- netif_stop_queue(dev);
- return 0;
-}
-
-/**
- * axnet_tx_timeout - handle transmit time out condition
- * @dev: network device which has apparently fallen asleep
- *
- * Called by kernel when device never acknowledges a transmit has
- * completed (or failed) - i.e. never posted a Tx related interrupt.
- */
-
-static void axnet_tx_timeout(struct net_device *dev)
-{
- long e8390_base = dev->base_addr;
- struct ei_device *ei_local = netdev_priv(dev);
- int txsr, isr, tickssofar = jiffies - dev_trans_start(dev);
- unsigned long flags;
-
- dev->stats.tx_errors++;
-
- spin_lock_irqsave(&ei_local->page_lock, flags);
- txsr = inb(e8390_base+EN0_TSR);
- isr = inb(e8390_base+EN0_ISR);
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
-
- netdev_printk(KERN_DEBUG, dev,
- "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
- (txsr & ENTSR_ABT) ? "excess collisions." :
- (isr) ? "lost interrupt?" : "cable problem?",
- txsr, isr, tickssofar);
-
- if (!isr && !dev->stats.tx_packets)
- {
- /* The 8390 probably hasn't gotten on the cable yet. */
- ei_local->interface_num ^= 1; /* Try a different xcvr. */
- }
-
- /* Ugly but a reset can be slow, yet must be protected */
-
- spin_lock_irqsave(&ei_local->page_lock, flags);
-
- /* Try to restart the card. Perhaps the user has fixed something. */
- ei_reset_8390(dev);
- AX88190_init(dev, 1);
-
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- netif_wake_queue(dev);
-}
-
-/**
- * axnet_start_xmit - begin packet transmission
- * @skb: packet to be sent
- * @dev: network device to which packet is sent
- *
- * Sends a packet to an 8390 network device.
- */
-
-static netdev_tx_t axnet_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- long e8390_base = dev->base_addr;
- struct ei_device *ei_local = netdev_priv(dev);
- int length, send_length, output_page;
- unsigned long flags;
- u8 packet[ETH_ZLEN];
-
- netif_stop_queue(dev);
-
- length = skb->len;
-
- /* Mask interrupts from the ethercard.
- SMP: We have to grab the lock here otherwise the IRQ handler
- on another CPU can flip window and race the IRQ mask set. We end
- up trashing the mcast filter not disabling irqs if we don't lock */
-
- spin_lock_irqsave(&ei_local->page_lock, flags);
- outb_p(0x00, e8390_base + EN0_IMR);
-
- /*
- * Slow phase with lock held.
- */
-
- ei_local->irqlock = 1;
-
- send_length = max(length, ETH_ZLEN);
-
- /*
- * We have two Tx slots available for use. Find the first free
- * slot, and then perform some sanity checks. With two Tx bufs,
- * you get very close to transmitting back-to-back packets. With
- * only one Tx buf, the transmitter sits idle while you reload the
- * card, leaving a substantial gap between each transmitted packet.
- */
-
- if (ei_local->tx1 == 0)
- {
- output_page = ei_local->tx_start_page;
- ei_local->tx1 = send_length;
- if (ei_debug && ei_local->tx2 > 0)
- netdev_printk(KERN_DEBUG, dev,
- "idle transmitter tx2=%d, lasttx=%d, txing=%d\n",
- ei_local->tx2, ei_local->lasttx,
- ei_local->txing);
- }
- else if (ei_local->tx2 == 0)
- {
- output_page = ei_local->tx_start_page + TX_PAGES/2;
- ei_local->tx2 = send_length;
- if (ei_debug && ei_local->tx1 > 0)
- netdev_printk(KERN_DEBUG, dev,
- "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n",
- ei_local->tx1, ei_local->lasttx,
- ei_local->txing);
- }
- else
- { /* We should never get here. */
- if (ei_debug)
- netdev_printk(KERN_DEBUG, dev,
- "No Tx buffers free! tx1=%d tx2=%d last=%d\n",
- ei_local->tx1, ei_local->tx2,
- ei_local->lasttx);
- ei_local->irqlock = 0;
- netif_stop_queue(dev);
- outb_p(ENISR_ALL, e8390_base + EN0_IMR);
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- dev->stats.tx_errors++;
- return NETDEV_TX_BUSY;
- }
-
- /*
- * Okay, now upload the packet and trigger a send if the transmitter
- * isn't already sending. If it is busy, the interrupt handler will
- * trigger the send later, upon receiving a Tx done interrupt.
- */
-
- if (length == skb->len)
- ei_block_output(dev, length, skb->data, output_page);
- else {
- memset(packet, 0, ETH_ZLEN);
- skb_copy_from_linear_data(skb, packet, skb->len);
- ei_block_output(dev, length, packet, output_page);
- }
-
- if (! ei_local->txing)
- {
- ei_local->txing = 1;
- NS8390_trigger_send(dev, send_length, output_page);
- dev->trans_start = jiffies;
- if (output_page == ei_local->tx_start_page)
- {
- ei_local->tx1 = -1;
- ei_local->lasttx = -1;
- }
- else
- {
- ei_local->tx2 = -1;
- ei_local->lasttx = -2;
- }
- }
- else ei_local->txqueue++;
-
- if (ei_local->tx1 && ei_local->tx2)
- netif_stop_queue(dev);
- else
- netif_start_queue(dev);
-
- /* Turn 8390 interrupts back on. */
- ei_local->irqlock = 0;
- outb_p(ENISR_ALL, e8390_base + EN0_IMR);
-
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
-
- dev_kfree_skb (skb);
- dev->stats.tx_bytes += send_length;
-
- return NETDEV_TX_OK;
-}
-
-/**
- * ax_interrupt - handle the interrupts from an 8390
- * @irq: interrupt number
- * @dev_id: a pointer to the net_device
- *
- * Handle the ether interface interrupts. We pull packets from
- * the 8390 via the card specific functions and fire them at the networking
- * stack. We also handle transmit completions and wake the transmit path if
- * necessary. We also update the counters and do other housekeeping as
- * needed.
- */
-
-static irqreturn_t ax_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- long e8390_base;
- int interrupts, nr_serviced = 0, i;
- struct ei_device *ei_local;
- int handled = 0;
- unsigned long flags;
-
- e8390_base = dev->base_addr;
- ei_local = netdev_priv(dev);
-
- /*
- * Protect the irq test too.
- */
-
- spin_lock_irqsave(&ei_local->page_lock, flags);
-
- if (ei_local->irqlock) {
-#if 1 /* This might just be an interrupt for a PCI device sharing this line */
- const char *msg;
- /* The "irqlock" check is only for testing. */
- if (ei_local->irqlock)
- msg = "Interrupted while interrupts are masked!";
- else
- msg = "Reentering the interrupt handler!";
- netdev_info(dev, "%s, isr=%#2x imr=%#2x\n",
- msg,
- inb_p(e8390_base + EN0_ISR),
- inb_p(e8390_base + EN0_IMR));
-#endif
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- return IRQ_NONE;
- }
-
- if (ei_debug > 3)
- netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n",
- inb_p(e8390_base + EN0_ISR));
-
- outb_p(0x00, e8390_base + EN0_ISR);
- ei_local->irqlock = 1;
-
- /* !!Assumption!! -- we stay in page 0. Don't break this. */
- while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 &&
- ++nr_serviced < MAX_SERVICE)
- {
- if (!netif_running(dev) || (interrupts == 0xff)) {
- if (ei_debug > 1)
- netdev_warn(dev,
- "interrupt from stopped card\n");
- outb_p(interrupts, e8390_base + EN0_ISR);
- interrupts = 0;
- break;
- }
- handled = 1;
-
- /* AX88190 bug fix. */
- outb_p(interrupts, e8390_base + EN0_ISR);
- for (i = 0; i < 10; i++) {
- if (!(inb(e8390_base + EN0_ISR) & interrupts))
- break;
- outb_p(0, e8390_base + EN0_ISR);
- outb_p(interrupts, e8390_base + EN0_ISR);
- }
- if (interrupts & ENISR_OVER)
- ei_rx_overrun(dev);
- else if (interrupts & (ENISR_RX+ENISR_RX_ERR))
- {
- /* Got a good (?) packet. */
- ei_receive(dev);
- }
- /* Push the next to-transmit packet through. */
- if (interrupts & ENISR_TX)
- ei_tx_intr(dev);
- else if (interrupts & ENISR_TX_ERR)
- ei_tx_err(dev);
-
- if (interrupts & ENISR_COUNTERS)
- {
- dev->stats.rx_frame_errors += inb_p(e8390_base + EN0_COUNTER0);
- dev->stats.rx_crc_errors += inb_p(e8390_base + EN0_COUNTER1);
- dev->stats.rx_missed_errors+= inb_p(e8390_base + EN0_COUNTER2);
- }
- }
-
- if (interrupts && ei_debug > 3)
- {
- handled = 1;
- if (nr_serviced >= MAX_SERVICE)
- {
- /* 0xFF is valid for a card removal */
- if(interrupts!=0xFF)
- netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n",
- interrupts);
- outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */
- } else {
- netdev_warn(dev, "unknown interrupt %#2x\n",
- interrupts);
- outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */
- }
- }
-
- /* Turn 8390 interrupts back on. */
- ei_local->irqlock = 0;
- outb_p(ENISR_ALL, e8390_base + EN0_IMR);
-
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
- return IRQ_RETVAL(handled);
-}
-
-/**
- * ei_tx_err - handle transmitter error
- * @dev: network device which threw the exception
- *
- * A transmitter error has happened. Most likely excess collisions (which
- * is a fairly normal condition). If the error is one where the Tx will
- * have been aborted, we try and send another one right away, instead of
- * letting the failed packet sit and collect dust in the Tx buffer. This
- * is a much better solution as it avoids kernel based Tx timeouts, and
- * an unnecessary card reset.
- *
- * Called with lock held.
- */
-
-static void ei_tx_err(struct net_device *dev)
-{
- long e8390_base = dev->base_addr;
- unsigned char txsr = inb_p(e8390_base+EN0_TSR);
- unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU);
-
-#ifdef VERBOSE_ERROR_DUMP
- netdev_printk(KERN_DEBUG, dev,
- "transmitter error (%#2x):", txsr);
- if (txsr & ENTSR_ABT)
- pr_cont(" excess-collisions");
- if (txsr & ENTSR_ND)
- pr_cont(" non-deferral");
- if (txsr & ENTSR_CRS)
- pr_cont(" lost-carrier");
- if (txsr & ENTSR_FU)
- pr_cont(" FIFO-underrun");
- if (txsr & ENTSR_CDH)
- pr_cont(" lost-heartbeat");
- pr_cont("\n");
-#endif
-
- if (tx_was_aborted)
- ei_tx_intr(dev);
- else
- {
- dev->stats.tx_errors++;
- if (txsr & ENTSR_CRS) dev->stats.tx_carrier_errors++;
- if (txsr & ENTSR_CDH) dev->stats.tx_heartbeat_errors++;
- if (txsr & ENTSR_OWC) dev->stats.tx_window_errors++;
- }
-}
-
-/**
- * ei_tx_intr - transmit interrupt handler
- * @dev: network device for which tx intr is handled
- *
- * We have finished a transmit: check for errors and then trigger the next
- * packet to be sent. Called with lock held.
- */
-
-static void ei_tx_intr(struct net_device *dev)
-{
- long e8390_base = dev->base_addr;
- struct ei_device *ei_local = netdev_priv(dev);
- int status = inb(e8390_base + EN0_TSR);
-
- /*
- * There are two Tx buffers, see which one finished, and trigger
- * the send of another one if it exists.
- */
- ei_local->txqueue--;
-
- if (ei_local->tx1 < 0)
- {
- if (ei_local->lasttx != 1 && ei_local->lasttx != -1)
- netdev_err(dev, "%s: bogus last_tx_buffer %d, tx1=%d\n",
- ei_local->name, ei_local->lasttx,
- ei_local->tx1);
- ei_local->tx1 = 0;
- if (ei_local->tx2 > 0)
- {
- ei_local->txing = 1;
- NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
- dev->trans_start = jiffies;
- ei_local->tx2 = -1,
- ei_local->lasttx = 2;
- }
- else ei_local->lasttx = 20, ei_local->txing = 0;
- }
- else if (ei_local->tx2 < 0)
- {
- if (ei_local->lasttx != 2 && ei_local->lasttx != -2)
- netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n",
- ei_local->name, ei_local->lasttx,
- ei_local->tx2);
- ei_local->tx2 = 0;
- if (ei_local->tx1 > 0)
- {
- ei_local->txing = 1;
- NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page);
- dev->trans_start = jiffies;
- ei_local->tx1 = -1;
- ei_local->lasttx = 1;
- }
- else
- ei_local->lasttx = 10, ei_local->txing = 0;
- }
-// else
-// netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n",
-// ei_local->lasttx);
-
- /* Minimize Tx latency: update the statistics after we restart TXing. */
- if (status & ENTSR_COL)
- dev->stats.collisions++;
- if (status & ENTSR_PTX)
- dev->stats.tx_packets++;
- else
- {
- dev->stats.tx_errors++;
- if (status & ENTSR_ABT)
- {
- dev->stats.tx_aborted_errors++;
- dev->stats.collisions += 16;
- }
- if (status & ENTSR_CRS)
- dev->stats.tx_carrier_errors++;
- if (status & ENTSR_FU)
- dev->stats.tx_fifo_errors++;
- if (status & ENTSR_CDH)
- dev->stats.tx_heartbeat_errors++;
- if (status & ENTSR_OWC)
- dev->stats.tx_window_errors++;
- }
- netif_wake_queue(dev);
-}
-
-/**
- * ei_receive - receive some packets
- * @dev: network device with which receive will be run
- *
- * We have a good packet(s), get it/them out of the buffers.
- * Called with lock held.
- */
-
-static void ei_receive(struct net_device *dev)
-{
- long e8390_base = dev->base_addr;
- struct ei_device *ei_local = netdev_priv(dev);
- unsigned char rxing_page, this_frame, next_frame;
- unsigned short current_offset;
- int rx_pkt_count = 0;
- struct e8390_pkt_hdr rx_frame;
-
- while (++rx_pkt_count < 10)
- {
- int pkt_len, pkt_stat;
-
- /* Get the rx page (incoming packet pointer). */
- rxing_page = inb_p(e8390_base + EN1_CURPAG -1);
-
- /* Remove one frame from the ring. Boundary is always a page behind. */
- this_frame = inb_p(e8390_base + EN0_BOUNDARY) + 1;
- if (this_frame >= ei_local->stop_page)
- this_frame = ei_local->rx_start_page;
-
- /* Someday we'll omit the previous, iff we never get this message.
- (There is at least one clone claimed to have a problem.)
-
- Keep quiet if it looks like a card removal. One problem here
- is that some clones crash in roughly the same way.
- */
- if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF))
- netdev_err(dev, "mismatched read page pointers %2x vs %2x\n",
- this_frame, ei_local->current_page);
-
- if (this_frame == rxing_page) /* Read all the frames? */
- break; /* Done for now */
-
- current_offset = this_frame << 8;
- ei_get_8390_hdr(dev, &rx_frame, this_frame);
-
- pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr);
- pkt_stat = rx_frame.status;
-
- next_frame = this_frame + 1 + ((pkt_len+4)>>8);
-
- if (pkt_len < 60 || pkt_len > 1518)
- {
- if (ei_debug)
- netdev_printk(KERN_DEBUG, dev,
- "bogus packet size: %d, status=%#2x nxpg=%#2x\n",
- rx_frame.count, rx_frame.status,
- rx_frame.next);
- dev->stats.rx_errors++;
- dev->stats.rx_length_errors++;
- }
- else if ((pkt_stat & 0x0F) == ENRSR_RXOK)
- {
- struct sk_buff *skb;
-
- skb = dev_alloc_skb(pkt_len+2);
- if (skb == NULL)
- {
- if (ei_debug > 1)
- netdev_printk(KERN_DEBUG, dev,
- "Couldn't allocate a sk_buff of size %d\n",
- pkt_len);
- dev->stats.rx_dropped++;
- break;
- }
- else
- {
- skb_reserve(skb,2); /* IP headers on 16 byte boundaries */
- skb_put(skb, pkt_len); /* Make room */
- ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame));
- skb->protocol=eth_type_trans(skb,dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
- if (pkt_stat & ENRSR_PHY)
- dev->stats.multicast++;
- }
- }
- else
- {
- if (ei_debug)
- netdev_printk(KERN_DEBUG, dev,
- "bogus packet: status=%#2x nxpg=%#2x size=%d\n",
- rx_frame.status, rx_frame.next,
- rx_frame.count);
- dev->stats.rx_errors++;
- /* NB: The NIC counts CRC, frame and missed errors. */
- if (pkt_stat & ENRSR_FO)
- dev->stats.rx_fifo_errors++;
- }
- next_frame = rx_frame.next;
-
- /* This _should_ never happen: it's here for avoiding bad clones. */
- if (next_frame >= ei_local->stop_page) {
- netdev_info(dev, "next frame inconsistency, %#2x\n",
- next_frame);
- next_frame = ei_local->rx_start_page;
- }
- ei_local->current_page = next_frame;
- outb_p(next_frame-1, e8390_base+EN0_BOUNDARY);
- }
-}
-
-/**
- * ei_rx_overrun - handle receiver overrun
- * @dev: network device which threw exception
- *
- * We have a receiver overrun: we have to kick the 8390 to get it started
- * again. Problem is that you have to kick it exactly as NS prescribes in
- * the updated datasheets, or "the NIC may act in an unpredictable manner."
- * This includes causing "the NIC to defer indefinitely when it is stopped
- * on a busy network." Ugh.
- * Called with lock held. Don't call this with the interrupts off or your
- * computer will hate you - it takes 10ms or so.
- */
-
-static void ei_rx_overrun(struct net_device *dev)
-{
- axnet_dev_t *info = PRIV(dev);
- long e8390_base = dev->base_addr;
- unsigned char was_txing, must_resend = 0;
-
- /*
- * Record whether a Tx was in progress and then issue the
- * stop command.
- */
- was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
-
- if (ei_debug > 1)
- netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n");
- dev->stats.rx_over_errors++;
-
- /*
- * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total.
- * We wait at least 2ms.
- */
-
- mdelay(2);
-
- /*
- * Reset RBCR[01] back to zero as per magic incantation.
- */
- outb_p(0x00, e8390_base+EN0_RCNTLO);
- outb_p(0x00, e8390_base+EN0_RCNTHI);
-
- /*
- * See if any Tx was interrupted or not. According to NS, this
- * step is vital, and skipping it will cause no end of havoc.
- */
-
- if (was_txing)
- {
- unsigned char tx_completed = inb_p(e8390_base+EN0_ISR) & (ENISR_TX+ENISR_TX_ERR);
- if (!tx_completed)
- must_resend = 1;
- }
-
- /*
- * Have to enter loopback mode and then restart the NIC before
- * you are allowed to slurp packets up off the ring.
- */
- outb_p(E8390_TXOFF, e8390_base + EN0_TXCR);
- outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD);
-
- /*
- * Clear the Rx ring of all the debris, and ack the interrupt.
- */
- ei_receive(dev);
-
- /*
- * Leave loopback mode, and resend any packet that got stopped.
- */
- outb_p(E8390_TXCONFIG | info->duplex_flag, e8390_base + EN0_TXCR);
- if (must_resend)
- outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START + E8390_TRANS, e8390_base + E8390_CMD);
-}
-
-/*
- * Collect the stats. This is called unlocked and from several contexts.
- */
-
-static struct net_device_stats *get_stats(struct net_device *dev)
-{
- long ioaddr = dev->base_addr;
- struct ei_device *ei_local = netdev_priv(dev);
- unsigned long flags;
-
- /* If the card is stopped, just return the present stats. */
- if (!netif_running(dev))
- return &dev->stats;
-
- spin_lock_irqsave(&ei_local->page_lock,flags);
- /* Read the counter registers, assuming we are in page 0. */
- dev->stats.rx_frame_errors += inb_p(ioaddr + EN0_COUNTER0);
- dev->stats.rx_crc_errors += inb_p(ioaddr + EN0_COUNTER1);
- dev->stats.rx_missed_errors+= inb_p(ioaddr + EN0_COUNTER2);
- spin_unlock_irqrestore(&ei_local->page_lock, flags);
-
- return &dev->stats;
-}
-
-/*
- * Form the 64 bit 8390 multicast table from the linked list of addresses
- * associated with this dev structure.
- */
-
-static inline void make_mc_bits(u8 *bits, struct net_device *dev)
-{
- struct netdev_hw_addr *ha;
- u32 crc;
-
- netdev_for_each_mc_addr(ha, dev) {
- crc = ether_crc(ETH_ALEN, ha->addr);
- /*
- * The 8390 uses the 6 most significant bits of the
- * CRC to index the multicast table.
- */
- bits[crc>>29] |= (1<<((crc>>26)&7));
- }
-}
-
-/**
- * do_set_multicast_list - set/clear multicast filter
- * @dev: net device for which multicast filter is adjusted
- *
- * Set or clear the multicast filter for this adaptor.
- * Must be called with lock held.
- */
-
-static void do_set_multicast_list(struct net_device *dev)
-{
- long e8390_base = dev->base_addr;
- int i;
- struct ei_device *ei_local = netdev_priv(dev);
-
- if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) {
- memset(ei_local->mcfilter, 0, 8);
- if (!netdev_mc_empty(dev))
- make_mc_bits(ei_local->mcfilter, dev);
- } else {
- /* set to accept-all */
- memset(ei_local->mcfilter, 0xFF, 8);
- }
-
- outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
- for(i = 0; i < 8; i++)
- {
- outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i));
- }
- outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD);
-
- if(dev->flags&IFF_PROMISC)
- outb_p(E8390_RXCONFIG | 0x58, e8390_base + EN0_RXCR);
- else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev))
- outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
- else
- outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
-
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
-}
-
-/*
- * Called without lock held. This is invoked from user context and may
- * be parallel to just about everything else. Its also fairly quick and
- * not called too often. Must protect against both bh and irq users
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev_lock(dev), flags);
- do_set_multicast_list(dev);
- spin_unlock_irqrestore(&dev_lock(dev), flags);
-}
-
-/* This page of functions should be 8390 generic */
-/* Follow National Semi's recommendations for initializing the "NIC". */
-
-/**
- * AX88190_init - initialize 8390 hardware
- * @dev: network device to initialize
- * @startp: boolean. non-zero value to initiate chip processing
- *
- * Must be called with lock held.
- */
-
-static void AX88190_init(struct net_device *dev, int startp)
-{
- axnet_dev_t *info = PRIV(dev);
- long e8390_base = dev->base_addr;
- struct ei_device *ei_local = netdev_priv(dev);
- int i;
- int endcfg = ei_local->word16 ? (0x48 | ENDCFG_WTS) : 0x48;
-
- if(sizeof(struct e8390_pkt_hdr)!=4)
- panic("8390.c: header struct mispacked\n");
- /* Follow National Semi's recommendations for initing the DP83902. */
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); /* 0x21 */
- outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */
- /* Clear the remote byte count registers. */
- outb_p(0x00, e8390_base + EN0_RCNTLO);
- outb_p(0x00, e8390_base + EN0_RCNTHI);
- /* Set to monitor and loopback mode -- this is vital!. */
- outb_p(E8390_RXOFF|0x40, e8390_base + EN0_RXCR); /* 0x60 */
- outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */
- /* Set the transmit page and receive ring. */
- outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR);
- ei_local->tx1 = ei_local->tx2 = 0;
- outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG);
- outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/
- ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */
- outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG);
- /* Clear the pending interrupts and mask. */
- outb_p(0xFF, e8390_base + EN0_ISR);
- outb_p(0x00, e8390_base + EN0_IMR);
-
- /* Copy the station address into the DS8390 registers. */
-
- outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */
- for(i = 0; i < 6; i++)
- {
- outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i));
- if(inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i])
- netdev_err(dev, "Hw. address read/write mismap %d\n", i);
- }
-
- outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG);
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
-
- netif_start_queue(dev);
- ei_local->tx1 = ei_local->tx2 = 0;
- ei_local->txing = 0;
-
- if (info->flags & IS_AX88790) /* select Internal PHY */
- outb(0x10, e8390_base + AXNET_GPIO);
-
- if (startp)
- {
- outb_p(0xff, e8390_base + EN0_ISR);
- outb_p(ENISR_ALL, e8390_base + EN0_IMR);
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
- outb_p(E8390_TXCONFIG | info->duplex_flag,
- e8390_base + EN0_TXCR); /* xmit on. */
- /* 3c503 TechMan says rxconfig only after the NIC is started. */
- outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR); /* rx on, */
- do_set_multicast_list(dev); /* (re)load the mcast table */
- }
-}
-
-/* Trigger a transmit start, assuming the length is valid.
- Always called with the page lock held */
-
-static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
- int start_page)
-{
- long e8390_base = dev->base_addr;
- struct ei_device *ei_local __attribute((unused)) = netdev_priv(dev);
-
- if (inb_p(e8390_base) & E8390_TRANS)
- {
- netdev_warn(dev, "trigger_send() called with the transmitter busy\n");
- return;
- }
- outb_p(length & 0xff, e8390_base + EN0_TCNTLO);
- outb_p(length >> 8, e8390_base + EN0_TCNTHI);
- outb_p(start_page, e8390_base + EN0_TPSR);
- outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base+E8390_CMD);
-}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
deleted file mode 100644
index b4fd7c3..0000000
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ /dev/null
@@ -1,1710 +0,0 @@
-/*======================================================================
-
- A PCMCIA ethernet driver for NS8390-based cards
-
- This driver supports the D-Link DE-650 and Linksys EthernetCard
- cards, the newer D-Link and Linksys combo cards, Accton EN2212
- cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
- mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
- Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
- mode. It will also handle the Socket EA card in either mode.
-
- Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
-
- pcnet_cs.c 1.153 2003/11/09 18:53:09
-
- The network driver code is based on Donald Becker's NE2000 code:
-
- Written 1992,1993 by Donald Becker.
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency. This software may be used and
- distributed according to the terms of the GNU General Public License,
- incorporated herein by reference.
- Donald Becker may be reached at becker@scyld.com
-
- Based also on Keith Moore's changes to Don Becker's code, for IBM
- CCAE support. Drivers merged back together, and shared-memory
- Socket EA support added, by Ken Raeburn, September 1995.
-
-======================================================================*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/log2.h>
-#include <linux/etherdevice.h>
-#include <linux/mii.h>
-#include "../8390.h"
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-
-#define PCNET_CMD 0x00
-#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
-#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
-#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
-
-#define PCNET_START_PG 0x40 /* First page of TX buffer */
-#define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-/* Socket EA cards have a larger packet buffer */
-#define SOCKET_START_PG 0x01
-#define SOCKET_STOP_PG 0xff
-
-#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */
-
-static const char *if_names[] = { "auto", "10baseT", "10base2"};
-
-
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
-MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver");
-MODULE_LICENSE("GPL");
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-INT_MODULE_PARM(if_port, 1); /* Transceiver type */
-INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */
-INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */
-INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */
-INT_MODULE_PARM(delay_time, 4); /* in usec */
-INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */
-INT_MODULE_PARM(full_duplex, 0); /* full duplex? */
-
-/* Ugh! Let the user hardwire the hardware address for queer cards */
-static int hw_addr[6] = { 0, /* ... */ };
-module_param_array(hw_addr, int, NULL, 0);
-
-/*====================================================================*/
-
-static void mii_phy_probe(struct net_device *dev);
-static int pcnet_config(struct pcmcia_device *link);
-static void pcnet_release(struct pcmcia_device *link);
-static int pcnet_open(struct net_device *dev);
-static int pcnet_close(struct net_device *dev);
-static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
-static void ei_watchdog(u_long arg);
-static void pcnet_reset_8390(struct net_device *dev);
-static int set_config(struct net_device *dev, struct ifmap *map);
-static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
- int stop_pg, int cm_offset);
-static int setup_dma_config(struct pcmcia_device *link, int start_pg,
- int stop_pg);
-
-static void pcnet_detach(struct pcmcia_device *p_dev);
-
-/*====================================================================*/
-
-typedef struct hw_info_t {
- u_int offset;
- u_char a0, a1, a2;
- u_int flags;
-} hw_info_t;
-
-#define DELAY_OUTPUT 0x01
-#define HAS_MISC_REG 0x02
-#define USE_BIG_BUF 0x04
-#define HAS_IBM_MISC 0x08
-#define IS_DL10019 0x10
-#define IS_DL10022 0x20
-#define HAS_MII 0x40
-#define USE_SHMEM 0x80 /* autodetected */
-
-#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */
-#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */
-#define MII_PHYID_REV_MASK 0xfffffff0
-#define MII_PHYID_REG1 0x02
-#define MII_PHYID_REG2 0x03
-
-static hw_info_t hw_info[] = {
- { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
- { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
- { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
- { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
- DELAY_OUTPUT | HAS_IBM_MISC },
- { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
- { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
- { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
- { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
- { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
- { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
- { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
- { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
- { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
- { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
- { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
- { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
- { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
- { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
- { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
- HAS_MISC_REG | HAS_IBM_MISC },
- { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
- { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
- { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
- { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
- DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
- { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
- { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
- { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
- { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
- { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
-};
-
-#define NR_INFO ARRAY_SIZE(hw_info)
-
-static hw_info_t default_info = { 0, 0, 0, 0, 0 };
-static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII };
-static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
-
-typedef struct pcnet_dev_t {
- struct pcmcia_device *p_dev;
- u_int flags;
- void __iomem *base;
- struct timer_list watchdog;
- int stale, fast_poll;
- u_char phy_id;
- u_char eth_phy, pna_phy;
- u_short link_status;
- u_long mii_reset;
-} pcnet_dev_t;
-
-static inline pcnet_dev_t *PRIV(struct net_device *dev)
-{
- char *p = netdev_priv(dev);
- return (pcnet_dev_t *)(p + sizeof(struct ei_device));
-}
-
-static const struct net_device_ops pcnet_netdev_ops = {
- .ndo_open = pcnet_open,
- .ndo_stop = pcnet_close,
- .ndo_set_config = set_config,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_get_stats = ei_get_stats,
- .ndo_do_ioctl = ei_ioctl,
- .ndo_set_multicast_list = ei_set_multicast_list,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
-#endif
-};
-
-static int pcnet_probe(struct pcmcia_device *link)
-{
- pcnet_dev_t *info;
- struct net_device *dev;
-
- dev_dbg(&link->dev, "pcnet_attach()\n");
-
- /* Create new ethernet device */
- dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
- if (!dev) return -ENOMEM;
- info = PRIV(dev);
- info->p_dev = link;
- link->priv = dev;
-
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
-
- dev->netdev_ops = &pcnet_netdev_ops;
-
- return pcnet_config(link);
-} /* pcnet_attach */
-
-static void pcnet_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- dev_dbg(&link->dev, "pcnet_detach\n");
-
- unregister_netdev(dev);
-
- pcnet_release(link);
-
- free_netdev(dev);
-} /* pcnet_detach */
-
-/*======================================================================
-
- This probes for a card's hardware address, for card types that
- encode this information in their CIS.
-
-======================================================================*/
-
-static hw_info_t *get_hwinfo(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- u_char __iomem *base, *virt;
- int i, j;
-
- /* Allocate a small memory window */
- link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
- link->resource[2]->start = 0; link->resource[2]->end = 0;
- i = pcmcia_request_window(link, link->resource[2], 0);
- if (i != 0)
- return NULL;
-
- virt = ioremap(link->resource[2]->start,
- resource_size(link->resource[2]));
- for (i = 0; i < NR_INFO; i++) {
- pcmcia_map_mem_page(link, link->resource[2],
- hw_info[i].offset & ~(resource_size(link->resource[2])-1));
- base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)];
- if ((readb(base+0) == hw_info[i].a0) &&
- (readb(base+2) == hw_info[i].a1) &&
- (readb(base+4) == hw_info[i].a2)) {
- for (j = 0; j < 6; j++)
- dev->dev_addr[j] = readb(base + (j<<1));
- break;
- }
- }
-
- iounmap(virt);
- j = pcmcia_release_window(link, link->resource[2]);
- return (i < NR_INFO) ? hw_info+i : NULL;
-} /* get_hwinfo */
-
-/*======================================================================
-
- This probes for a card's hardware address by reading the PROM.
- It checks the address against a list of known types, then falls
- back to a simple NE2000 clone signature check.
-
-======================================================================*/
-
-static hw_info_t *get_prom(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- unsigned int ioaddr = dev->base_addr;
- u_char prom[32];
- int i, j;
-
- /* This is lifted straight from drivers/net/ne.c */
- struct {
- u_char value, offset;
- } program_seq[] = {
- {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
- {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
- {0x00, EN0_RCNTLO}, /* Clear the count regs. */
- {0x00, EN0_RCNTHI},
- {0x00, EN0_IMR}, /* Mask completion irq. */
- {0xFF, EN0_ISR},
- {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
- {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
- {32, EN0_RCNTLO},
- {0x00, EN0_RCNTHI},
- {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
- {0x00, EN0_RSARHI},
- {E8390_RREAD+E8390_START, E8390_CMD},
- };
-
- pcnet_reset_8390(dev);
- mdelay(10);
-
- for (i = 0; i < ARRAY_SIZE(program_seq); i++)
- outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
-
- for (i = 0; i < 32; i++)
- prom[i] = inb(ioaddr + PCNET_DATAPORT);
- for (i = 0; i < NR_INFO; i++) {
- if ((prom[0] == hw_info[i].a0) &&
- (prom[2] == hw_info[i].a1) &&
- (prom[4] == hw_info[i].a2))
- break;
- }
- if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
- for (j = 0; j < 6; j++)
- dev->dev_addr[j] = prom[j<<1];
- return (i < NR_INFO) ? hw_info+i : &default_info;
- }
- return NULL;
-} /* get_prom */
-
-/*======================================================================
-
- For DL10019 based cards, like the Linksys EtherFast
-
-======================================================================*/
-
-static hw_info_t *get_dl10019(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- int i;
- u_char sum;
-
- for (sum = 0, i = 0x14; i < 0x1c; i++)
- sum += inb_p(dev->base_addr + i);
- if (sum != 0xff)
- return NULL;
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i);
- i = inb(dev->base_addr + 0x1f);
- return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info;
-}
-
-/*======================================================================
-
- For Asix AX88190 based cards
-
-======================================================================*/
-
-static hw_info_t *get_ax88190(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- unsigned int ioaddr = dev->base_addr;
- int i, j;
-
- /* Not much of a test, but the alternatives are messy */
- if (link->config_base != 0x03c0)
- return NULL;
-
- outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */
- outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */
- outb_p(0x04, ioaddr + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD);
-
- for (i = 0; i < 6; i += 2) {
- j = inw(ioaddr + PCNET_DATAPORT);
- dev->dev_addr[i] = j & 0xff;
- dev->dev_addr[i+1] = j >> 8;
- }
- return NULL;
-}
-
-/*======================================================================
-
- This should be totally unnecessary... but when we can't figure
- out the hardware address any other way, we'll let the user hard
- wire it when the module is initialized.
-
-======================================================================*/
-
-static hw_info_t *get_hwired(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- int i;
-
- for (i = 0; i < 6; i++)
- if (hw_addr[i] != 0) break;
- if (i == 6)
- return NULL;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = hw_addr[i];
-
- return &default_info;
-} /* get_hwired */
-
-static int try_io_port(struct pcmcia_device *link)
-{
- int j, ret;
- link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- if (link->resource[0]->end == 32) {
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- if (link->resource[1]->end > 0) {
- /* for master/slave multifunction cards */
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- }
- } else {
- /* This should be two 16-port windows */
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
- }
- if (link->resource[0]->start == 0) {
- for (j = 0; j < 0x400; j += 0x20) {
- link->resource[0]->start = j ^ 0x300;
- link->resource[1]->start = (j ^ 0x300) + 0x10;
- link->io_lines = 16;
- ret = pcmcia_request_io(link);
- if (ret == 0)
- return ret;
- }
- return ret;
- } else {
- return pcmcia_request_io(link);
- }
-}
-
-static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data)
-{
- int *priv = priv_data;
- int try = (*priv & 0x1);
-
- *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10;
-
- if (p_dev->config_index == 0)
- return -EINVAL;
-
- if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
- return -EINVAL;
-
- if (try)
- p_dev->io_lines = 16;
- return try_io_port(p_dev);
-}
-
-static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
- int *has_shmem, int try)
-{
- struct net_device *dev = link->priv;
- hw_info_t *local_hw_info;
- pcnet_dev_t *info = PRIV(dev);
- int priv = try;
- int ret;
-
- ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
- if (ret) {
- dev_warn(&link->dev, "no useable port range found\n");
- return NULL;
- }
- *has_shmem = (priv & 0x10);
-
- if (!link->irq)
- return NULL;
-
- if (resource_size(link->resource[1]) == 8)
- link->config_flags |= CONF_ENABLE_SPKR;
-
- if ((link->manf_id == MANFID_IBM) &&
- (link->card_id == PRODID_IBM_HOME_AND_AWAY))
- link->config_index |= 0x10;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- return NULL;
-
- dev->irq = link->irq;
- dev->base_addr = link->resource[0]->start;
-
- if (info->flags & HAS_MISC_REG) {
- if ((if_port == 1) || (if_port == 2))
- dev->if_port = if_port;
- else
- dev_notice(&link->dev, "invalid if_port requested\n");
- } else
- dev->if_port = 0;
-
- if ((link->config_base == 0x03c0) &&
- (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
- dev_info(&link->dev,
- "this is an AX88190 card - use axnet_cs instead.\n");
- return NULL;
- }
-
- local_hw_info = get_hwinfo(link);
- if (!local_hw_info)
- local_hw_info = get_prom(link);
- if (!local_hw_info)
- local_hw_info = get_dl10019(link);
- if (!local_hw_info)
- local_hw_info = get_ax88190(link);
- if (!local_hw_info)
- local_hw_info = get_hwired(link);
-
- return local_hw_info;
-}
-
-static int pcnet_config(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- pcnet_dev_t *info = PRIV(dev);
- int start_pg, stop_pg, cm_offset;
- int has_shmem = 0;
- hw_info_t *local_hw_info;
-
- dev_dbg(&link->dev, "pcnet_config\n");
-
- local_hw_info = pcnet_try_config(link, &has_shmem, 0);
- if (!local_hw_info) {
- /* check whether forcing io_lines to 16 helps... */
- pcmcia_disable_device(link);
- local_hw_info = pcnet_try_config(link, &has_shmem, 1);
- if (local_hw_info == NULL) {
- dev_notice(&link->dev, "unable to read hardware net"
- " address for io base %#3lx\n", dev->base_addr);
- goto failed;
- }
- }
-
- info->flags = local_hw_info->flags;
- /* Check for user overrides */
- info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
- if ((link->manf_id == MANFID_SOCKET) &&
- ((link->card_id == PRODID_SOCKET_LPE) ||
- (link->card_id == PRODID_SOCKET_LPE_CF) ||
- (link->card_id == PRODID_SOCKET_EIO)))
- info->flags &= ~USE_BIG_BUF;
- if (!use_big_buf)
- info->flags &= ~USE_BIG_BUF;
-
- if (info->flags & USE_BIG_BUF) {
- start_pg = SOCKET_START_PG;
- stop_pg = SOCKET_STOP_PG;
- cm_offset = 0x10000;
- } else {
- start_pg = PCNET_START_PG;
- stop_pg = PCNET_STOP_PG;
- cm_offset = 0;
- }
-
- /* has_shmem is ignored if use_shmem != -1 */
- if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) ||
- (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0))
- setup_dma_config(link, start_pg, stop_pg);
-
- ei_status.name = "NE2000";
- ei_status.word16 = 1;
- ei_status.reset_8390 = pcnet_reset_8390;
-
- if (info->flags & (IS_DL10019|IS_DL10022))
- mii_phy_probe(dev);
-
- SET_NETDEV_DEV(dev, &link->dev);
-
- if (register_netdev(dev) != 0) {
- pr_notice("register_netdev() failed\n");
- goto failed;
- }
-
- if (info->flags & (IS_DL10019|IS_DL10022)) {
- u_char id = inb(dev->base_addr + 0x1a);
- netdev_info(dev, "NE2000 (DL100%d rev %02x): ",
- (info->flags & IS_DL10022) ? 22 : 19, id);
- if (info->pna_phy)
- pr_cont("PNA, ");
- } else {
- netdev_info(dev, "NE2000 Compatible: ");
- }
- pr_cont("io %#3lx, irq %d,", dev->base_addr, dev->irq);
- if (info->flags & USE_SHMEM)
- pr_cont(" mem %#5lx,", dev->mem_start);
- if (info->flags & HAS_MISC_REG)
- pr_cont(" %s xcvr,", if_names[dev->if_port]);
- pr_cont(" hw_addr %pM\n", dev->dev_addr);
- return 0;
-
-failed:
- pcnet_release(link);
- return -ENODEV;
-} /* pcnet_config */
-
-static void pcnet_release(struct pcmcia_device *link)
-{
- pcnet_dev_t *info = PRIV(link->priv);
-
- dev_dbg(&link->dev, "pcnet_release\n");
-
- if (info->flags & USE_SHMEM)
- iounmap(info->base);
-
- pcmcia_disable_device(link);
-}
-
-static int pcnet_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open)
- netif_device_detach(dev);
-
- return 0;
-}
-
-static int pcnet_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open) {
- pcnet_reset_8390(dev);
- NS8390_init(dev, 1);
- netif_device_attach(dev);
- }
-
- return 0;
-}
-
-
-/*======================================================================
-
- MII interface support for DL10019 and DL10022 based cards
-
- On the DL10019, the MII IO direction bit is 0x10; on the DL10022
- it is 0x20. Setting both bits seems to work on both card types.
-
-======================================================================*/
-
-#define DLINK_GPIO 0x1c
-#define DLINK_DIAG 0x1d
-#define DLINK_EEPROM 0x1e
-
-#define MDIO_SHIFT_CLK 0x80
-#define MDIO_DATA_OUT 0x40
-#define MDIO_DIR_WRITE 0x30
-#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
-#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
-#define MDIO_DATA_READ 0x10
-#define MDIO_MASK 0x0f
-
-static void mdio_sync(unsigned int addr)
-{
- int bits, mask = inb(addr) & MDIO_MASK;
- for (bits = 0; bits < 32; bits++) {
- outb(mask | MDIO_DATA_WRITE1, addr);
- outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
- }
-}
-
-static int mdio_read(unsigned int addr, int phy_id, int loc)
-{
- u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
- int i, retval = 0, mask = inb(addr) & MDIO_MASK;
-
- mdio_sync(addr);
- for (i = 13; i >= 0; i--) {
- int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
- outb(mask | dat, addr);
- outb(mask | dat | MDIO_SHIFT_CLK, addr);
- }
- for (i = 19; i > 0; i--) {
- outb(mask, addr);
- retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
- outb(mask | MDIO_SHIFT_CLK, addr);
- }
- return (retval>>1) & 0xffff;
-}
-
-static void mdio_write(unsigned int addr, int phy_id, int loc, int value)
-{
- u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
- int i, mask = inb(addr) & MDIO_MASK;
-
- mdio_sync(addr);
- for (i = 31; i >= 0; i--) {
- int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
- outb(mask | dat, addr);
- outb(mask | dat | MDIO_SHIFT_CLK, addr);
- }
- for (i = 1; i >= 0; i--) {
- outb(mask, addr);
- outb(mask | MDIO_SHIFT_CLK, addr);
- }
-}
-
-/*======================================================================
-
- EEPROM access routines for DL10019 and DL10022 based cards
-
-======================================================================*/
-
-#define EE_EEP 0x40
-#define EE_ASIC 0x10
-#define EE_CS 0x08
-#define EE_CK 0x04
-#define EE_DO 0x02
-#define EE_DI 0x01
-#define EE_ADOT 0x01 /* DataOut for ASIC */
-#define EE_READ_CMD 0x06
-
-#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */
-
-static int read_eeprom(unsigned int ioaddr, int location)
-{
- int i, retval = 0;
- unsigned int ee_addr = ioaddr + DLINK_EEPROM;
- int read_cmd = location | (EE_READ_CMD << 8);
-
- outb(0, ee_addr);
- outb(EE_EEP|EE_CS, ee_addr);
-
- /* Shift the read command bits out. */
- for (i = 10; i >= 0; i--) {
- short dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
- outb_p(EE_EEP|EE_CS|dataval, ee_addr);
- outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr);
- }
- outb(EE_EEP|EE_CS, ee_addr);
-
- for (i = 16; i > 0; i--) {
- outb_p(EE_EEP|EE_CS | EE_CK, ee_addr);
- retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0);
- outb_p(EE_EEP|EE_CS, ee_addr);
- }
-
- /* Terminate the EEPROM access. */
- outb(0, ee_addr);
- return retval;
-}
-
-/*
- The internal ASIC registers can be changed by EEPROM READ access
- with EE_ASIC bit set.
- In ASIC mode, EE_ADOT is used to output the data to the ASIC.
-*/
-
-static void write_asic(unsigned int ioaddr, int location, short asic_data)
-{
- int i;
- unsigned int ee_addr = ioaddr + DLINK_EEPROM;
- short dataval;
- int read_cmd = location | (EE_READ_CMD << 8);
-
- asic_data |= read_eeprom(ioaddr, location);
-
- outb(0, ee_addr);
- outb(EE_ASIC|EE_CS|EE_DI, ee_addr);
-
- read_cmd = read_cmd >> 1;
-
- /* Shift the read command bits out. */
- for (i = 9; i >= 0; i--) {
- dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
- outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
- outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr);
- outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
- }
- // sync
- outb(EE_ASIC|EE_CS, ee_addr);
- outb(EE_ASIC|EE_CS|EE_CK, ee_addr);
- outb(EE_ASIC|EE_CS, ee_addr);
-
- for (i = 15; i >= 0; i--) {
- dataval = (asic_data & (1 << i)) ? EE_ADOT : 0;
- outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
- outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr);
- outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
- }
-
- /* Terminate the ASIC access. */
- outb(EE_ASIC|EE_DI, ee_addr);
- outb(EE_ASIC|EE_DI| EE_CK, ee_addr);
- outb(EE_ASIC|EE_DI, ee_addr);
-
- outb(0, ee_addr);
-}
-
-/*====================================================================*/
-
-static void set_misc_reg(struct net_device *dev)
-{
- unsigned int nic_base = dev->base_addr;
- pcnet_dev_t *info = PRIV(dev);
- u_char tmp;
-
- if (info->flags & HAS_MISC_REG) {
- tmp = inb_p(nic_base + PCNET_MISC) & ~3;
- if (dev->if_port == 2)
- tmp |= 1;
- if (info->flags & USE_BIG_BUF)
- tmp |= 2;
- if (info->flags & HAS_IBM_MISC)
- tmp |= 8;
- outb_p(tmp, nic_base + PCNET_MISC);
- }
- if (info->flags & IS_DL10022) {
- if (info->flags & HAS_MII) {
- /* Advertise 100F, 100H, 10F, 10H */
- mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
- /* Restart MII autonegotiation */
- mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
- mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
- info->mii_reset = jiffies;
- } else {
- outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
- }
- } else if (info->flags & IS_DL10019) {
- /* Advertise 100F, 100H, 10F, 10H */
- mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
- /* Restart MII autonegotiation */
- mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
- mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
- }
-}
-
-/*====================================================================*/
-
-static void mii_phy_probe(struct net_device *dev)
-{
- pcnet_dev_t *info = PRIV(dev);
- unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
- int i;
- u_int tmp, phyid;
-
- for (i = 31; i >= 0; i--) {
- tmp = mdio_read(mii_addr, i, 1);
- if ((tmp == 0) || (tmp == 0xffff))
- continue;
- tmp = mdio_read(mii_addr, i, MII_PHYID_REG1);
- phyid = tmp << 16;
- phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
- phyid &= MII_PHYID_REV_MASK;
- netdev_dbg(dev, "MII at %d is 0x%08x\n", i, phyid);
- if (phyid == AM79C9XX_HOME_PHY) {
- info->pna_phy = i;
- } else if (phyid != AM79C9XX_ETH_PHY) {
- info->eth_phy = i;
- }
- }
-}
-
-static int pcnet_open(struct net_device *dev)
-{
- int ret;
- pcnet_dev_t *info = PRIV(dev);
- struct pcmcia_device *link = info->p_dev;
- unsigned int nic_base = dev->base_addr;
-
- dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name);
-
- if (!pcmcia_dev_present(link))
- return -ENODEV;
-
- set_misc_reg(dev);
-
- outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
- ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev);
- if (ret)
- return ret;
-
- link->open++;
-
- info->phy_id = info->eth_phy;
- info->link_status = 0x00;
- init_timer(&info->watchdog);
- info->watchdog.function = ei_watchdog;
- info->watchdog.data = (u_long)dev;
- info->watchdog.expires = jiffies + HZ;
- add_timer(&info->watchdog);
-
- return ei_open(dev);
-} /* pcnet_open */
-
-/*====================================================================*/
-
-static int pcnet_close(struct net_device *dev)
-{
- pcnet_dev_t *info = PRIV(dev);
- struct pcmcia_device *link = info->p_dev;
-
- dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name);
-
- ei_close(dev);
- free_irq(dev->irq, dev);
-
- link->open--;
- netif_stop_queue(dev);
- del_timer_sync(&info->watchdog);
-
- return 0;
-} /* pcnet_close */
-
-/*======================================================================
-
- Hard reset the card. This used to pause for the same period that
- a 8390 reset command required, but that shouldn't be necessary.
-
-======================================================================*/
-
-static void pcnet_reset_8390(struct net_device *dev)
-{
- unsigned int nic_base = dev->base_addr;
- int i;
-
- ei_status.txing = ei_status.dmaing = 0;
-
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
-
- outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET);
-
- for (i = 0; i < 100; i++) {
- if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
- break;
- udelay(100);
- }
- outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
-
- if (i == 100)
- netdev_err(dev, "pcnet_reset_8390() did not complete.\n");
-
- set_misc_reg(dev);
-
-} /* pcnet_reset_8390 */
-
-/*====================================================================*/
-
-static int set_config(struct net_device *dev, struct ifmap *map)
-{
- pcnet_dev_t *info = PRIV(dev);
- if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
- if (!(info->flags & HAS_MISC_REG))
- return -EOPNOTSUPP;
- else if ((map->port < 1) || (map->port > 2))
- return -EINVAL;
- dev->if_port = map->port;
- netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
- NS8390_init(dev, 1);
- }
- return 0;
-}
-
-/*====================================================================*/
-
-static irqreturn_t ei_irq_wrapper(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- pcnet_dev_t *info;
- irqreturn_t ret = ei_interrupt(irq, dev_id);
-
- if (ret == IRQ_HANDLED) {
- info = PRIV(dev);
- info->stale = 0;
- }
- return ret;
-}
-
-static void ei_watchdog(u_long arg)
-{
- struct net_device *dev = (struct net_device *)arg;
- pcnet_dev_t *info = PRIV(dev);
- unsigned int nic_base = dev->base_addr;
- unsigned int mii_addr = nic_base + DLINK_GPIO;
- u_short link;
-
- if (!netif_device_present(dev)) goto reschedule;
-
- /* Check for pending interrupt with expired latency timer: with
- this, we can limp along even if the interrupt is blocked */
- if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
- if (!info->fast_poll)
- netdev_info(dev, "interrupt(s) dropped!\n");
- ei_irq_wrapper(dev->irq, dev);
- info->fast_poll = HZ;
- }
- if (info->fast_poll) {
- info->fast_poll--;
- info->watchdog.expires = jiffies + 1;
- add_timer(&info->watchdog);
- return;
- }
-
- if (!(info->flags & HAS_MII))
- goto reschedule;
-
- mdio_read(mii_addr, info->phy_id, 1);
- link = mdio_read(mii_addr, info->phy_id, 1);
- if (!link || (link == 0xffff)) {
- if (info->eth_phy) {
- info->phy_id = info->eth_phy = 0;
- } else {
- netdev_info(dev, "MII is missing!\n");
- info->flags &= ~HAS_MII;
- }
- goto reschedule;
- }
-
- link &= 0x0004;
- if (link != info->link_status) {
- u_short p = mdio_read(mii_addr, info->phy_id, 5);
- netdev_info(dev, "%s link beat\n", link ? "found" : "lost");
- if (link && (info->flags & IS_DL10022)) {
- /* Disable collision detection on full duplex links */
- outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
- } else if (link && (info->flags & IS_DL10019)) {
- /* Disable collision detection on full duplex links */
- write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0);
- }
- if (link) {
- if (info->phy_id == info->eth_phy) {
- if (p)
- netdev_info(dev, "autonegotiation complete: "
- "%sbaseT-%cD selected\n",
- ((p & 0x0180) ? "100" : "10"),
- ((p & 0x0140) ? 'F' : 'H'));
- else
- netdev_info(dev, "link partner did not autonegotiate\n");
- }
- NS8390_init(dev, 1);
- }
- info->link_status = link;
- }
- if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) {
- link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004;
- if (((info->phy_id == info->pna_phy) && link) ||
- ((info->phy_id != info->pna_phy) && !link)) {
- /* isolate this MII and try flipping to the other one */
- mdio_write(mii_addr, info->phy_id, 0, 0x0400);
- info->phy_id ^= info->pna_phy ^ info->eth_phy;
- netdev_info(dev, "switched to %s transceiver\n",
- (info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
- mdio_write(mii_addr, info->phy_id, 0,
- (info->phy_id == info->eth_phy) ? 0x1000 : 0);
- info->link_status = 0;
- info->mii_reset = jiffies;
- }
- }
-
-reschedule:
- info->watchdog.expires = jiffies + HZ;
- add_timer(&info->watchdog);
-}
-
-/*====================================================================*/
-
-
-static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- pcnet_dev_t *info = PRIV(dev);
- struct mii_ioctl_data *data = if_mii(rq);
- unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
-
- if (!(info->flags & (IS_DL10019|IS_DL10022)))
- return -EINVAL;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = info->phy_id;
- case SIOCGMIIREG: /* Read MII PHY register. */
- data->val_out = mdio_read(mii_addr, data->phy_id, data->reg_num & 0x1f);
- return 0;
- case SIOCSMIIREG: /* Write MII PHY register. */
- mdio_write(mii_addr, data->phy_id, data->reg_num & 0x1f, data->val_in);
- return 0;
- }
- return -EOPNOTSUPP;
-}
-
-/*====================================================================*/
-
-static void dma_get_8390_hdr(struct net_device *dev,
- struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- unsigned int nic_base = dev->base_addr;
-
- if (ei_status.dmaing) {
- netdev_notice(dev, "DMAing conflict in dma_block_input."
- "[DMAstat:%1x][irqlock:%1x]\n",
- ei_status.dmaing, ei_status.irqlock);
- return;
- }
-
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
- outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
- outb_p(0, nic_base + EN0_RCNTHI);
- outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
- outb_p(ring_page, nic_base + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
-
- insw(nic_base + PCNET_DATAPORT, hdr,
- sizeof(struct e8390_pkt_hdr)>>1);
- /* Fix for big endian systems */
- hdr->count = le16_to_cpu(hdr->count);
-
- outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-/*====================================================================*/
-
-static void dma_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset)
-{
- unsigned int nic_base = dev->base_addr;
- int xfer_count = count;
- char *buf = skb->data;
-
- if ((ei_debug > 4) && (count != 4))
- netdev_dbg(dev, "[bi=%d]\n", count+4);
- if (ei_status.dmaing) {
- netdev_notice(dev, "DMAing conflict in dma_block_input."
- "[DMAstat:%1x][irqlock:%1x]\n",
- ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
- outb_p(count & 0xff, nic_base + EN0_RCNTLO);
- outb_p(count >> 8, nic_base + EN0_RCNTHI);
- outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
- outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
-
- insw(nic_base + PCNET_DATAPORT,buf,count>>1);
- if (count & 0x01)
- buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
-
- /* This was for the ALPHA version only, but enough people have been
- encountering problems that it is still here. */
-#ifdef PCMCIA_DEBUG
- if (ei_debug > 4) { /* DMA termination address check... */
- int addr, tries = 20;
- do {
- /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
- -- it's broken for Rx on some cards! */
- int high = inb_p(nic_base + EN0_RSARHI);
- int low = inb_p(nic_base + EN0_RSARLO);
- addr = (high << 8) + low;
- if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff))
- break;
- } while (--tries > 0);
- if (tries <= 0)
- netdev_notice(dev, "RX transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- ring_offset + xfer_count, addr);
- }
-#endif
- outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-} /* dma_block_input */
-
-/*====================================================================*/
-
-static void dma_block_output(struct net_device *dev, int count,
- const u_char *buf, const int start_page)
-{
- unsigned int nic_base = dev->base_addr;
- pcnet_dev_t *info = PRIV(dev);
-#ifdef PCMCIA_DEBUG
- int retries = 0;
-#endif
- u_long dma_start;
-
-#ifdef PCMCIA_DEBUG
- if (ei_debug > 4)
- netdev_dbg(dev, "[bo=%d]\n", count);
-#endif
-
- /* Round the count up for word writes. Do we need to do this?
- What effect will an odd byte count have on the 8390?
- I should check someday. */
- if (count & 0x01)
- count++;
- if (ei_status.dmaing) {
- netdev_notice(dev, "DMAing conflict in dma_block_output."
- "[DMAstat:%1x][irqlock:%1x]\n",
- ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- /* We should already be in page 0, but to be safe... */
- outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD);
-
-#ifdef PCMCIA_DEBUG
- retry:
-#endif
-
- outb_p(ENISR_RDC, nic_base + EN0_ISR);
-
- /* Now the normal output. */
- outb_p(count & 0xff, nic_base + EN0_RCNTLO);
- outb_p(count >> 8, nic_base + EN0_RCNTHI);
- outb_p(0x00, nic_base + EN0_RSARLO);
- outb_p(start_page, nic_base + EN0_RSARHI);
-
- outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD);
- outsw(nic_base + PCNET_DATAPORT, buf, count>>1);
-
- dma_start = jiffies;
-
-#ifdef PCMCIA_DEBUG
- /* This was for the ALPHA version only, but enough people have been
- encountering problems that it is still here. */
- if (ei_debug > 4) { /* DMA termination address check... */
- int addr, tries = 20;
- do {
- int high = inb_p(nic_base + EN0_RSARHI);
- int low = inb_p(nic_base + EN0_RSARLO);
- addr = (high << 8) + low;
- if ((start_page << 8) + count == addr)
- break;
- } while (--tries > 0);
- if (tries <= 0) {
- netdev_notice(dev, "Tx packet transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- (start_page << 8) + count, addr);
- if (retries++ == 0)
- goto retry;
- }
- }
-#endif
-
- while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
- if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
- netdev_notice(dev, "timeout waiting for Tx RDC.\n");
- pcnet_reset_8390(dev);
- NS8390_init(dev, 1);
- break;
- }
-
- outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
- if (info->flags & DELAY_OUTPUT)
- udelay((long)delay_time);
- ei_status.dmaing &= ~0x01;
-}
-
-/*====================================================================*/
-
-static int setup_dma_config(struct pcmcia_device *link, int start_pg,
- int stop_pg)
-{
- struct net_device *dev = link->priv;
-
- ei_status.tx_start_page = start_pg;
- ei_status.rx_start_page = start_pg + TX_PAGES;
- ei_status.stop_page = stop_pg;
-
- /* set up block i/o functions */
- ei_status.get_8390_hdr = dma_get_8390_hdr;
- ei_status.block_input = dma_block_input;
- ei_status.block_output = dma_block_output;
-
- return 0;
-}
-
-/*====================================================================*/
-
-static void copyin(void *dest, void __iomem *src, int c)
-{
- u_short *d = dest;
- u_short __iomem *s = src;
- int odd;
-
- if (c <= 0)
- return;
- odd = (c & 1); c >>= 1;
-
- if (c) {
- do { *d++ = __raw_readw(s++); } while (--c);
- }
- /* get last byte by fetching a word and masking */
- if (odd)
- *((u_char *)d) = readw(s) & 0xff;
-}
-
-static void copyout(void __iomem *dest, const void *src, int c)
-{
- u_short __iomem *d = dest;
- const u_short *s = src;
- int odd;
-
- if (c <= 0)
- return;
- odd = (c & 1); c >>= 1;
-
- if (c) {
- do { __raw_writew(*s++, d++); } while (--c);
- }
- /* copy last byte doing a read-modify-write */
- if (odd)
- writew((readw(d) & 0xff00) | *(u_char *)s, d);
-}
-
-/*====================================================================*/
-
-static void shmem_get_8390_hdr(struct net_device *dev,
- struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
- + (ring_page << 8)
- - (ei_status.rx_start_page << 8);
-
- copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr));
- /* Fix for big endian systems */
- hdr->count = le16_to_cpu(hdr->count);
-}
-
-/*====================================================================*/
-
-static void shmem_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset)
-{
- void __iomem *base = ei_status.mem;
- unsigned long offset = (TX_PAGES<<8) + ring_offset
- - (ei_status.rx_start_page << 8);
- char *buf = skb->data;
-
- if (offset + count > ei_status.priv) {
- /* We must wrap the input move. */
- int semi_count = ei_status.priv - offset;
- copyin(buf, base + offset, semi_count);
- buf += semi_count;
- offset = TX_PAGES<<8;
- count -= semi_count;
- }
- copyin(buf, base + offset, count);
-}
-
-/*====================================================================*/
-
-static void shmem_block_output(struct net_device *dev, int count,
- const u_char *buf, const int start_page)
-{
- void __iomem *shmem = ei_status.mem + (start_page << 8);
- shmem -= ei_status.tx_start_page << 8;
- copyout(shmem, buf, count);
-}
-
-/*====================================================================*/
-
-static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
- int stop_pg, int cm_offset)
-{
- struct net_device *dev = link->priv;
- pcnet_dev_t *info = PRIV(dev);
- int i, window_size, offset, ret;
-
- window_size = (stop_pg - start_pg) << 8;
- if (window_size > 32 * 1024)
- window_size = 32 * 1024;
-
- /* Make sure it's a power of two. */
- window_size = roundup_pow_of_two(window_size);
-
- /* Allocate a memory window */
- link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
- link->resource[3]->flags |= WIN_USE_WAIT;
- link->resource[3]->start = 0; link->resource[3]->end = window_size;
- ret = pcmcia_request_window(link, link->resource[3], mem_speed);
- if (ret)
- goto failed;
-
- offset = (start_pg << 8) + cm_offset;
- offset -= offset % window_size;
- ret = pcmcia_map_mem_page(link, link->resource[3], offset);
- if (ret)
- goto failed;
-
- /* Try scribbling on the buffer */
- info->base = ioremap(link->resource[3]->start,
- resource_size(link->resource[3]));
- for (i = 0; i < (TX_PAGES<<8); i += 2)
- __raw_writew((i>>1), info->base+offset+i);
- udelay(100);
- for (i = 0; i < (TX_PAGES<<8); i += 2)
- if (__raw_readw(info->base+offset+i) != (i>>1)) break;
- pcnet_reset_8390(dev);
- if (i != (TX_PAGES<<8)) {
- iounmap(info->base);
- pcmcia_release_window(link, link->resource[3]);
- info->base = NULL;
- goto failed;
- }
-
- ei_status.mem = info->base + offset;
- ei_status.priv = resource_size(link->resource[3]);
- dev->mem_start = (u_long)ei_status.mem;
- dev->mem_end = dev->mem_start + resource_size(link->resource[3]);
-
- ei_status.tx_start_page = start_pg;
- ei_status.rx_start_page = start_pg + TX_PAGES;
- ei_status.stop_page = start_pg + (
- (resource_size(link->resource[3]) - offset) >> 8);
-
- /* set up block i/o functions */
- ei_status.get_8390_hdr = shmem_get_8390_hdr;
- ei_status.block_input = shmem_block_input;
- ei_status.block_output = shmem_block_output;
-
- info->flags |= USE_SHMEM;
- return 0;
-
-failed:
- return 1;
-}
-
-/*====================================================================*/
-
-static const struct pcmcia_device_id pcnet_ids[] = {
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
- PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
- PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
- PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
- PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
- PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
- PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004),
- PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d),
- PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075),
- PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
- PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
- PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
- PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
- PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
- PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
- PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
- PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
- PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
- PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
- PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
- PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0),
- PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b),
- PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b),
- PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b),
- PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0),
- PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82),
- PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8),
- PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab),
- PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
- PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
- PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
- PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
- PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb),
- PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247),
- PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96),
- PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1),
- PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd),
- PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190),
- PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504),
- PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a),
- PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79),
- PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7),
- PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a),
- PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
- PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
- PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
- PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
- PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
- PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
- PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88),
- PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
- PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
- PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
- PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0),
- PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf),
- PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995),
- PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233),
- PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
- PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
- PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
- PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
- PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
- PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
- PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
- PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1),
- PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1),
- PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb),
- PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11),
- PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6),
- PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c),
- PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e),
- PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61),
- PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517),
- PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e),
- PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb),
- PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327),
- PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
- PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
- PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
- PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
- PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
- PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
- PCMCIA_DEVICE_PROD_ID12("KENTRONICS", "KEP-230", 0xaf8144c9, 0x868f6616),
- PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64),
- PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5),
- PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3),
- PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2),
- PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c),
- PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40),
- PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7),
- PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab),
- PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78),
- PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
- PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
- PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
- PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
- PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c),
- PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
- PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
- PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
- PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4),
- PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c),
- PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6),
- PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472),
- PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7),
- PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9),
- PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
- PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
- PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
- PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641),
- PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b),
- PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1),
- PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80),
- PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
- PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
- PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
- PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
- PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
- PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
- PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388),
- PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c),
- PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265),
- PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e),
- PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8),
- PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa),
- PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f),
- PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a),
- PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e),
- PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0),
- PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e),
- PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89),
- PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
- PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
- PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
- PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
- PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
- /* too generic! */
- /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
- PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
- PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
- PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
- 0xb4be14e3, 0x43ac239b, 0x0877b627),
- PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
-MODULE_FIRMWARE("cis/PCMLM28.cis");
-MODULE_FIRMWARE("cis/DP83903.cis");
-MODULE_FIRMWARE("cis/LA-PCM.cis");
-MODULE_FIRMWARE("cis/PE520.cis");
-MODULE_FIRMWARE("cis/NE2K.cis");
-MODULE_FIRMWARE("cis/PE-200.cis");
-MODULE_FIRMWARE("cis/tamarack.cis");
-
-static struct pcmcia_driver pcnet_driver = {
- .name = "pcnet_cs",
- .probe = pcnet_probe,
- .remove = pcnet_detach,
- .owner = THIS_MODULE,
- .id_table = pcnet_ids,
- .suspend = pcnet_suspend,
- .resume = pcnet_resume,
-};
-
-static int __init init_pcnet_cs(void)
-{
- return pcmcia_register_driver(&pcnet_driver);
-}
-
-static void __exit exit_pcnet_cs(void)
-{
- pcmcia_unregister_driver(&pcnet_driver);
-}
-
-module_init(init_pcnet_cs);
-module_exit(exit_pcnet_cs);
OpenPOWER on IntegriCloud