Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 3273 insertions, 0 deletions

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
new file mode 100644
index 0000000..223bdad
--- /dev/null
+++ b/drivers/net/natsemi.c
@@ -0,0 +1,3273 @@
+/* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */
+/*
+	Written/copyright 1999-2001 by Donald Becker.
+	Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com)
+	Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com)
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.  License for under other terms may be
+	available.  Contact the original author for details.
+
+	The original author may be reached as becker@scyld.com, or at
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	Support information and updates available at
+	http://www.scyld.com/network/netsemi.html
+
+
+	Linux kernel modifications:
+
+	Version 1.0.1:
+		- Spinlock fixes
+		- Bug fixes and better intr performance (Tjeerd)
+	Version 1.0.2:
+		- Now reads correct MAC address from eeprom
+	Version 1.0.3:
+		- Eliminate redundant priv->tx_full flag
+		- Call netif_start_queue from dev->tx_timeout
+		- wmb() in start_tx() to flush data
+		- Update Tx locking
+		- Clean up PCI enable (davej)
+	Version 1.0.4:
+		- Merge Donald Becker's natsemi.c version 1.07
+	Version 1.0.5:
+		- { fill me in }
+	Version 1.0.6:
+		* ethtool support (jgarzik)
+		* Proper initialization of the card (which sometimes
+		fails to occur and leaves the card in a non-functional
+		state). (uzi)
+
+		* Some documented register settings to optimize some
+		of the 100Mbit autodetection circuitry in rev C cards. (uzi)
+
+		* Polling of the PHY intr for stuff like link state
+		change and auto- negotiation to finally work properly. (uzi)
+
+		* One-liner removal of a duplicate declaration of
+		netdev_error(). (uzi)
+
+	Version 1.0.7: (Manfred Spraul)
+		* pci dma
+		* SMP locking update
+		* full reset added into tx_timeout
+		* correct multicast hash generation (both big and little endian)
+			[copied from a natsemi driver version
+			 from Myrio Corporation, Greg Smith]
+		* suspend/resume
+
+	version 1.0.8 (Tim Hockin <thockin@sun.com>)
+		* ETHTOOL_* support
+		* Wake on lan support (Erik Gilling)
+		* MXDMA fixes for serverworks
+		* EEPROM reload
+
+	version 1.0.9 (Manfred Spraul)
+		* Main change: fix lack of synchronize
+		netif_close/netif_suspend against a last interrupt
+		or packet.
+		* do not enable superflous interrupts (e.g. the
+		drivers relies on TxDone - TxIntr not needed)
+		* wait that the hardware has really stopped in close
+		and suspend.
+		* workaround for the (at least) gcc-2.95.1 compiler
+		problem. Also simplifies the code a bit.
+		* disable_irq() in tx_timeout - needed to protect
+		against rx interrupts.
+		* stop the nic before switching into silent rx mode
+		for wol (required according to docu).
+
+	version 1.0.10:
+		* use long for ee_addr (various)
+		* print pointers properly (DaveM)
+		* include asm/irq.h (?)
+
+	version 1.0.11:
+		* check and reset if PHY errors appear (Adrian Sun)
+		* WoL cleanup (Tim Hockin)
+		* Magic number cleanup (Tim Hockin)
+		* Don't reload EEPROM on every reset (Tim Hockin)
+		* Save and restore EEPROM state across reset (Tim Hockin)
+		* MDIO Cleanup (Tim Hockin)
+		* Reformat register offsets/bits (jgarzik)
+
+	version 1.0.12:
+		* ETHTOOL_* further support (Tim Hockin)
+
+	version 1.0.13:
+		* ETHTOOL_[G]EEPROM support (Tim Hockin)
+
+	version 1.0.13:
+		* crc cleanup (Matt Domsch <Matt_Domsch@dell.com>)
+
+	version 1.0.14:
+		* Cleanup some messages and autoneg in ethtool (Tim Hockin)
+
+	version 1.0.15:
+		* Get rid of cable_magic flag
+		* use new (National provided) solution for cable magic issue
+
+	version 1.0.16:
+		* call netdev_rx() for RxErrors (Manfred Spraul)
+		* formatting and cleanups
+		* change options and full_duplex arrays to be zero
+		  initialized
+		* enable only the WoL and PHY interrupts in wol mode
+
+	version 1.0.17:
+		* only do cable_magic on 83815 and early 83816 (Tim Hockin)
+		* create a function for rx refill (Manfred Spraul)
+		* combine drain_ring and init_ring (Manfred Spraul)
+		* oom handling (Manfred Spraul)
+		* hands_off instead of playing with netif_device_{de,a}ttach
+		  (Manfred Spraul)
+		* be sure to write the MAC back to the chip (Manfred Spraul)
+		* lengthen EEPROM timeout, and always warn about timeouts
+		  (Manfred Spraul)
+		* comments update (Manfred)
+		* do the right thing on a phy-reset (Manfred and Tim)
+
+	TODO:
+	* big endian support with CFG:BEM instead of cpu_to_le32
+	* support for an external PHY
+	* NAPI
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include <linux/rtnetlink.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>	/* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define DRV_NAME	"natsemi"
+#define DRV_VERSION	"1.07+LK1.0.17"
+#define DRV_RELDATE	"Sep 27, 2002"
+
+#define RX_OFFSET	2
+
+/* Updated to recommendations in pci-skeleton v2.03. */
+
+/* The user-configurable values.
+   These may be modified when a driver module is loaded.*/
+
+#define NATSEMI_DEF_MSG		(NETIF_MSG_DRV		| \
+				 NETIF_MSG_LINK		| \
+				 NETIF_MSG_WOL		| \
+				 NETIF_MSG_RX_ERR	| \
+				 NETIF_MSG_TX_ERR)
+static int debug = -1;
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+static int mtu;
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+   This chip uses a 512 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 100;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak;
+
+/* Used to pass the media type, etc.
+   Both 'options[]' and 'full_duplex[]' should exist for driver
+   interoperability.
+   The media type is usually passed in 'options[]'.
+*/
+#define MAX_UNITS 8		/* More are supported, limit only on options */
+static int options[MAX_UNITS];
+static int full_duplex[MAX_UNITS];
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE	16
+#define TX_QUEUE_LEN	10 /* Limit ring entries actually used, min 4. */
+#define RX_RING_SIZE	32
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (2*HZ)
+
+#define NATSEMI_HW_TIMEOUT	400
+#define NATSEMI_TIMER_FREQ	3*HZ
+#define NATSEMI_PG0_NREGS	64
+#define NATSEMI_RFDR_NREGS	8
+#define NATSEMI_PG1_NREGS	4
+#define NATSEMI_NREGS		(NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \
+				 NATSEMI_PG1_NREGS)
+#define NATSEMI_REGS_VER	1 /* v1 added RFDR registers */
+#define NATSEMI_REGS_SIZE	(NATSEMI_NREGS * sizeof(u32))
+#define NATSEMI_EEPROM_SIZE	24 /* 12 16-bit values */
+
+/* Buffer sizes:
+ * The nic writes 32-bit values, even if the upper bytes of
+ * a 32-bit value are beyond the end of the buffer.
+ */
+#define NATSEMI_HEADERS		22	/* 2*mac,type,vlan,crc */
+#define NATSEMI_PADDING		16	/* 2 bytes should be sufficient */
+#define NATSEMI_LONGPKT		1518	/* limit for normal packets */
+#define NATSEMI_RX_LIMIT	2046	/* maximum supported by hardware */
+
+/* These identify the driver base version and may not be removed. */
+static char version[] __devinitdata =
+  KERN_INFO DRV_NAME " dp8381x driver, version "
+      DRV_VERSION ", " DRV_RELDATE "\n"
+  KERN_INFO "  originally by Donald Becker <becker@scyld.com>\n"
+  KERN_INFO "  http://www.scyld.com/network/natsemi.html\n"
+  KERN_INFO "  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(max_interrupt_work, int, 0);
+module_param(mtu, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+MODULE_PARM_DESC(max_interrupt_work, 
+	"DP8381x maximum events handled per interrupt");
+MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
+MODULE_PARM_DESC(debug, "DP8381x default debug level");
+MODULE_PARM_DESC(rx_copybreak, 
+	"DP8381x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(options, 
+	"DP8381x: Bits 0-3: media type, bit 17: full duplex");
+MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC.
+It also works with other chips in in the DP83810 series.
+
+II. Board-specific settings
+
+This driver requires the PCI interrupt line to be valid.
+It honors the EEPROM-set values.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list.  The ring sizes are set at compile time by RX/TX_RING_SIZE.
+The NatSemi design uses a 'next descriptor' pointer that the driver forms
+into a list.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver uses a zero-copy receive and transmit scheme.
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers.  When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack.  Buffers consumed this way are replaced by newly allocated
+skbuffs in a later phase of receives.
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames.  New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets.  When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine.  Copying also preloads the cache, which is
+most useful with small frames.
+
+A subtle aspect of the operation is that unaligned buffers are not permitted
+by the hardware.  Thus the IP header at offset 14 in an ethernet frame isn't
+longword aligned for further processing.  On copies frames are put into the
+skbuff at an offset of "+2", 16-byte aligning the IP header.
+
+IIId. Synchronization
+
+Most operations are synchronized on the np->lock irq spinlock, except the
+performance critical codepaths:
+
+The rx process only runs in the interrupt handler. Access from outside
+the interrupt handler is only permitted after disable_irq().
+
+The rx process usually runs under the dev->xmit_lock. If np->intr_tx_reap
+is set, then access is permitted under spin_lock_irq(&np->lock).
+
+Thus configuration functions that want to access everything must call
+	disable_irq(dev->irq);
+	spin_lock_bh(dev->xmit_lock);
+	spin_lock_irq(&np->lock);
+
+IV. Notes
+
+NatSemi PCI network controllers are very uncommon.
+
+IVb. References
+
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+Datasheet is available from:
+http://www.national.com/pf/DP/DP83815.html
+
+IVc. Errata
+
+None characterised.
+*/
+
+
+
+enum pcistuff {
+	PCI_USES_IO = 0x01,
+	PCI_USES_MEM = 0x02,
+	PCI_USES_MASTER = 0x04,
+	PCI_ADDR0 = 0x08,
+	PCI_ADDR1 = 0x10,
+};
+
+/* MMIO operations required */
+#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1)
+
+
+/*
+ * Support for fibre connections on Am79C874:
+ * This phy needs a special setup when connected to a fibre cable.
+ * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf
+ */
+#define PHYID_AM79C874	0x0022561b
+
+#define MII_MCTRL	0x15	/* mode control register */
+#define MII_FX_SEL	0x0001	/* 100BASE-FX (fiber) */
+#define MII_EN_SCRM	0x0004	/* enable scrambler (tp) */
+
+ 
+/* array of board data directly indexed by pci_tbl[x].driver_data */
+static struct {
+	const char *name;
+	unsigned long flags;
+} natsemi_pci_info[] __devinitdata = {
+	{ "NatSemi DP8381[56]", PCI_IOTYPE },
+};
+
+static struct pci_device_id natsemi_pci_tbl[] = {
+	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl);
+
+/* Offsets to the device registers.
+   Unlike software-only systems, device drivers interact with complex hardware.
+   It's not useful to define symbolic names for every register bit in the
+   device.
+*/
+enum register_offsets {
+	ChipCmd			= 0x00,
+	ChipConfig		= 0x04,
+	EECtrl			= 0x08,
+	PCIBusCfg		= 0x0C,
+	IntrStatus		= 0x10,
+	IntrMask		= 0x14,
+	IntrEnable		= 0x18,
+	IntrHoldoff		= 0x1C, /* DP83816 only */
+	TxRingPtr		= 0x20,
+	TxConfig		= 0x24,
+	RxRingPtr		= 0x30,
+	RxConfig		= 0x34,
+	ClkRun			= 0x3C,
+	WOLCmd			= 0x40,
+	PauseCmd		= 0x44,
+	RxFilterAddr		= 0x48,
+	RxFilterData		= 0x4C,
+	BootRomAddr		= 0x50,
+	BootRomData		= 0x54,
+	SiliconRev		= 0x58,
+	StatsCtrl		= 0x5C,
+	StatsData		= 0x60,
+	RxPktErrs		= 0x60,
+	RxMissed		= 0x68,
+	RxCRCErrs		= 0x64,
+	BasicControl		= 0x80,
+	BasicStatus		= 0x84,
+	AnegAdv			= 0x90,
+	AnegPeer		= 0x94,
+	PhyStatus		= 0xC0,
+	MIntrCtrl		= 0xC4,
+	MIntrStatus		= 0xC8,
+	PhyCtrl			= 0xE4,
+
+	/* These are from the spec, around page 78... on a separate table.
+	 * The meaning of these registers depend on the value of PGSEL. */
+	PGSEL			= 0xCC,
+	PMDCSR			= 0xE4,
+	TSTDAT			= 0xFC,
+	DSPCFG			= 0xF4,
+	SDCFG			= 0xF8
+};
+/* the values for the 'magic' registers above (PGSEL=1) */
+#define PMDCSR_VAL	0x189c	/* enable preferred adaptation circuitry */
+#define TSTDAT_VAL	0x0
+#define DSPCFG_VAL	0x5040
+#define SDCFG_VAL	0x008c	/* set voltage thresholds for Signal Detect */
+#define DSPCFG_LOCK	0x20	/* coefficient lock bit in DSPCFG */
+#define DSPCFG_COEF	0x1000	/* see coefficient (in TSTDAT) bit in DSPCFG */
+#define TSTDAT_FIXED	0xe8	/* magic number for bad coefficients */
+
+/* misc PCI space registers */
+enum pci_register_offsets {
+	PCIPM			= 0x44,
+};
+
+enum ChipCmd_bits {
+	ChipReset		= 0x100,
+	RxReset			= 0x20,
+	TxReset			= 0x10,
+	RxOff			= 0x08,
+	RxOn			= 0x04,
+	TxOff			= 0x02,
+	TxOn			= 0x01,
+};
+
+enum ChipConfig_bits {
+	CfgPhyDis		= 0x200,
+	CfgPhyRst		= 0x400,
+	CfgExtPhy		= 0x1000,
+	CfgAnegEnable		= 0x2000,
+	CfgAneg100		= 0x4000,
+	CfgAnegFull		= 0x8000,
+	CfgAnegDone		= 0x8000000,
+	CfgFullDuplex		= 0x20000000,
+	CfgSpeed100		= 0x40000000,
+	CfgLink			= 0x80000000,
+};
+
+enum EECtrl_bits {
+	EE_ShiftClk		= 0x04,
+	EE_DataIn		= 0x01,
+	EE_ChipSelect		= 0x08,
+	EE_DataOut		= 0x02,
+	MII_Data 		= 0x10,
+	MII_Write		= 0x20,
+	MII_ShiftClk		= 0x40,
+};
+
+enum PCIBusCfg_bits {
+	EepromReload		= 0x4,
+};
+
+/* Bits in the interrupt status/mask registers. */
+enum IntrStatus_bits {
+	IntrRxDone		= 0x0001,
+	IntrRxIntr		= 0x0002,
+	IntrRxErr		= 0x0004,
+	IntrRxEarly		= 0x0008,
+	IntrRxIdle		= 0x0010,
+	IntrRxOverrun		= 0x0020,
+	IntrTxDone		= 0x0040,
+	IntrTxIntr		= 0x0080,
+	IntrTxErr		= 0x0100,
+	IntrTxIdle		= 0x0200,
+	IntrTxUnderrun		= 0x0400,
+	StatsMax		= 0x0800,
+	SWInt			= 0x1000,
+	WOLPkt			= 0x2000,
+	LinkChange		= 0x4000,
+	IntrHighBits		= 0x8000,
+	RxStatusFIFOOver	= 0x10000,
+	IntrPCIErr		= 0xf00000,
+	RxResetDone		= 0x1000000,
+	TxResetDone		= 0x2000000,
+	IntrAbnormalSummary	= 0xCD20,
+};
+
+/*
+ * Default Interrupts:
+ * Rx OK, Rx Packet Error, Rx Overrun,
+ * Tx OK, Tx Packet Error, Tx Underrun,
+ * MIB Service, Phy Interrupt, High Bits,
+ * Rx Status FIFO overrun,
+ * Received Target Abort, Received Master Abort,
+ * Signalled System Error, Received Parity Error
+ */
+#define DEFAULT_INTR 0x00f1cd65
+
+enum TxConfig_bits {
+	TxDrthMask		= 0x3f,
+	TxFlthMask		= 0x3f00,
+	TxMxdmaMask		= 0x700000,
+	TxMxdma_512		= 0x0,
+	TxMxdma_4		= 0x100000,
+	TxMxdma_8		= 0x200000,
+	TxMxdma_16		= 0x300000,
+	TxMxdma_32		= 0x400000,
+	TxMxdma_64		= 0x500000,
+	TxMxdma_128		= 0x600000,
+	TxMxdma_256		= 0x700000,
+	TxCollRetry		= 0x800000,
+	TxAutoPad		= 0x10000000,
+	TxMacLoop		= 0x20000000,
+	TxHeartIgn		= 0x40000000,
+	TxCarrierIgn		= 0x80000000
+};
+
+/* 
+ * Tx Configuration:
+ * - 256 byte DMA burst length
+ * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free)
+ * - 64 bytes initial drain threshold (i.e. begin actual transmission
+ *   when 64 byte are in the fifo)
+ * - on tx underruns, increase drain threshold by 64.
+ * - at most use a drain threshold of 1472 bytes: The sum of the fill
+ *   threshold and the drain threshold must be less than 2016 bytes.
+ *
+ */
+#define TX_FLTH_VAL		((512/32) << 8)
+#define TX_DRTH_VAL_START	(64/32)
+#define TX_DRTH_VAL_INC		2
+#define TX_DRTH_VAL_LIMIT	(1472/32)
+
+enum RxConfig_bits {
+	RxDrthMask		= 0x3e,
+	RxMxdmaMask		= 0x700000,
+	RxMxdma_512		= 0x0,
+	RxMxdma_4		= 0x100000,
+	RxMxdma_8		= 0x200000,
+	RxMxdma_16		= 0x300000,
+	RxMxdma_32		= 0x400000,
+	RxMxdma_64		= 0x500000,
+	RxMxdma_128		= 0x600000,
+	RxMxdma_256		= 0x700000,
+	RxAcceptLong		= 0x8000000,
+	RxAcceptTx		= 0x10000000,
+	RxAcceptRunt		= 0x40000000,
+	RxAcceptErr		= 0x80000000
+};
+#define RX_DRTH_VAL		(128/8)
+
+enum ClkRun_bits {
+	PMEEnable		= 0x100,
+	PMEStatus		= 0x8000,
+};
+
+enum WolCmd_bits {
+	WakePhy			= 0x1,
+	WakeUnicast		= 0x2,
+	WakeMulticast		= 0x4,
+	WakeBroadcast		= 0x8,
+	WakeArp			= 0x10,
+	WakePMatch0		= 0x20,
+	WakePMatch1		= 0x40,
+	WakePMatch2		= 0x80,
+	WakePMatch3		= 0x100,
+	WakeMagic		= 0x200,
+	WakeMagicSecure		= 0x400,
+	SecureHack		= 0x100000,
+	WokePhy			= 0x400000,
+	WokeUnicast		= 0x800000,
+	WokeMulticast		= 0x1000000,
+	WokeBroadcast		= 0x2000000,
+	WokeArp			= 0x4000000,
+	WokePMatch0		= 0x8000000,
+	WokePMatch1		= 0x10000000,
+	WokePMatch2		= 0x20000000,
+	WokePMatch3		= 0x40000000,
+	WokeMagic		= 0x80000000,
+	WakeOptsSummary		= 0x7ff
+};
+
+enum RxFilterAddr_bits {
+	RFCRAddressMask		= 0x3ff,
+	AcceptMulticast		= 0x00200000,
+	AcceptMyPhys		= 0x08000000,
+	AcceptAllPhys		= 0x10000000,
+	AcceptAllMulticast	= 0x20000000,
+	AcceptBroadcast		= 0x40000000,
+	RxFilterEnable		= 0x80000000
+};
+
+enum StatsCtrl_bits {
+	StatsWarn		= 0x1,
+	StatsFreeze		= 0x2,
+	StatsClear		= 0x4,
+	StatsStrobe		= 0x8,
+};
+
+enum MIntrCtrl_bits {
+	MICRIntEn		= 0x2,
+};
+
+enum PhyCtrl_bits {
+	PhyAddrMask		= 0x1f,
+};
+
+#define PHY_ADDR_NONE		32
+#define PHY_ADDR_INTERNAL	1
+
+/* values we might find in the silicon revision register */
+#define SRR_DP83815_C	0x0302
+#define SRR_DP83815_D	0x0403
+#define SRR_DP83816_A4	0x0504
+#define SRR_DP83816_A5	0x0505
+
+/* The Rx and Tx buffer descriptors. */
+/* Note that using only 32 bit fields simplifies conversion to big-endian
+   architectures. */
+struct netdev_desc {
+	u32 next_desc;
+	s32 cmd_status;
+	u32 addr;
+	u32 software_use;
+};
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+	DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000,
+	DescNoCRC=0x10000000, DescPktOK=0x08000000,
+	DescSizeMask=0xfff,
+
+	DescTxAbort=0x04000000, DescTxFIFO=0x02000000,
+	DescTxCarrier=0x01000000, DescTxDefer=0x00800000,
+	DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000,
+	DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000,
+
+	DescRxAbort=0x04000000, DescRxOver=0x02000000,
+	DescRxDest=0x01800000, DescRxLong=0x00400000,
+	DescRxRunt=0x00200000, DescRxInvalid=0x00100000,
+	DescRxCRC=0x00080000, DescRxAlign=0x00040000,
+	DescRxLoop=0x00020000, DesRxColl=0x00010000,
+};
+
+struct netdev_private {
+	/* Descriptor rings first for alignment */
+	dma_addr_t ring_dma;
+	struct netdev_desc *rx_ring;
+	struct netdev_desc *tx_ring;
+	/* The addresses of receive-in-place skbuffs */
+	struct sk_buff *rx_skbuff[RX_RING_SIZE];
+	dma_addr_t rx_dma[RX_RING_SIZE];
+	/* address of a sent-in-place packet/buffer, for later free() */
+	struct sk_buff *tx_skbuff[TX_RING_SIZE];
+	dma_addr_t tx_dma[TX_RING_SIZE];
+	struct net_device_stats stats;
+	/* Media monitoring timer */
+	struct timer_list timer;
+	/* Frequently used values: keep some adjacent for cache effect */
+	struct pci_dev *pci_dev;
+	struct netdev_desc *rx_head_desc;
+	/* Producer/consumer ring indices */
+	unsigned int cur_rx, dirty_rx;
+	unsigned int cur_tx, dirty_tx;
+	/* Based on MTU+slack. */
+	unsigned int rx_buf_sz;
+	int oom;
+	/* Do not touch the nic registers */
+	int hands_off;
+	/* external phy that is used: only valid if dev->if_port != PORT_TP */
+	int mii;
+	int phy_addr_external;
+	unsigned int full_duplex;
+	/* Rx filter */
+	u32 cur_rx_mode;
+	u32 rx_filter[16];
+	/* FIFO and PCI burst thresholds */
+	u32 tx_config, rx_config;
+	/* original contents of ClkRun register */
+	u32 SavedClkRun;
+	/* silicon revision */
+	u32 srr;
+	/* expected DSPCFG value */
+	u16 dspcfg;
+	/* parms saved in ethtool format */
+	u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	u8	duplex;		/* Duplex, half or full */
+	u8	autoneg;	/* Autonegotiation enabled */
+	/* MII transceiver section */
+	u16 advertising;
+	unsigned int iosize;
+	spinlock_t lock;
+	u32 msg_enable;
+};
+
+static void move_int_phy(struct net_device *dev, int addr);
+static int eeprom_read(void __iomem *ioaddr, int location);
+static int mdio_read(struct net_device *dev, int reg);
+static void mdio_write(struct net_device *dev, int reg, u16 data);
+static void init_phy_fixup(struct net_device *dev);
+static int miiport_read(struct net_device *dev, int phy_id, int reg);
+static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data);
+static int find_mii(struct net_device *dev);
+static void natsemi_reset(struct net_device *dev);
+static void natsemi_reload_eeprom(struct net_device *dev);
+static void natsemi_stop_rxtx(struct net_device *dev);
+static int netdev_open(struct net_device *dev);
+static void do_cable_magic(struct net_device *dev);
+static void undo_cable_magic(struct net_device *dev);
+static void check_link(struct net_device *dev);
+static void netdev_timer(unsigned long data);
+static void dump_ring(struct net_device *dev);
+static void tx_timeout(struct net_device *dev);
+static int alloc_ring(struct net_device *dev);
+static void refill_rx(struct net_device *dev);
+static void init_ring(struct net_device *dev);
+static void drain_tx(struct net_device *dev);
+static void drain_ring(struct net_device *dev);
+static void free_ring(struct net_device *dev);
+static void reinit_ring(struct net_device *dev);
+static void init_registers(struct net_device *dev);
+static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
+static void netdev_error(struct net_device *dev, int intr_status);
+static void netdev_rx(struct net_device *dev);
+static void netdev_tx_done(struct net_device *dev);
+static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void natsemi_poll_controller(struct net_device *dev);
+#endif
+static void __set_rx_mode(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void __get_stats(struct net_device *dev);
+static struct net_device_stats *get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int netdev_set_wol(struct net_device *dev, u32 newval);
+static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur);
+static int netdev_set_sopass(struct net_device *dev, u8 *newval);
+static int netdev_get_sopass(struct net_device *dev, u8 *data);
+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd);
+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd);
+static void enable_wol_mode(struct net_device *dev, int enable_intr);
+static int netdev_close(struct net_device *dev);
+static int netdev_get_regs(struct net_device *dev, u8 *buf);
+static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
+static struct ethtool_ops ethtool_ops;
+
+static inline void __iomem *ns_ioaddr(struct net_device *dev)
+{
+	return (void __iomem *) dev->base_addr;
+}
+
+static void move_int_phy(struct net_device *dev, int addr)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int target = 31;
+
+	/* 
+	 * The internal phy is visible on the external mii bus. Therefore we must
+	 * move it away before we can send commands to an external phy.
+	 * There are two addresses we must avoid:
+	 * - the address on the external phy that is used for transmission.
+	 * - the address that we want to access. User space can access phys
+	 *   on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independant from the
+	 *   phy that is used for transmission.
+	 */
+
+	if (target == addr)
+		target--;
+	if (target == np->phy_addr_external)
+		target--;
+	writew(target, ioaddr + PhyCtrl);
+	readw(ioaddr + PhyCtrl);
+	udelay(1);
+}
+
+static int __devinit natsemi_probe1 (struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct netdev_private *np;
+	int i, option, irq, chip_idx = ent->driver_data;
+	static int find_cnt = -1;
+	unsigned long iostart, iosize;
+	void __iomem *ioaddr;
+	const int pcibar = 1; /* PCI base address register */
+	int prev_eedata;
+	u32 tmp;
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version++)
+		printk(version);
+#endif
+
+	i = pci_enable_device(pdev);
+	if (i) return i;
+
+	/* natsemi has a non-standard PM control register
+	 * in PCI config space.  Some boards apparently need
+	 * to be brought to D0 in this manner.
+	 */
+	pci_read_config_dword(pdev, PCIPM, &tmp);
+	if (tmp & PCI_PM_CTRL_STATE_MASK) {
+		/* D0 state, disable PME assertion */
+		u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK;
+		pci_write_config_dword(pdev, PCIPM, newtmp);
+	}
+
+	find_cnt++;
+	iostart = pci_resource_start(pdev, pcibar);
+	iosize = pci_resource_len(pdev, pcibar);
+	irq = pdev->irq;
+
+	if (natsemi_pci_info[chip_idx].flags & PCI_USES_MASTER)
+		pci_set_master(pdev);
+
+	dev = alloc_etherdev(sizeof (struct netdev_private));
+	if (!dev)
+		return -ENOMEM;
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	i = pci_request_regions(pdev, DRV_NAME);
+	if (i)
+		goto err_pci_request_regions;
+
+	ioaddr = ioremap(iostart, iosize);
+	if (!ioaddr) {
+		i = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	/* Work around the dropped serial bit. */
+	prev_eedata = eeprom_read(ioaddr, 6);
+	for (i = 0; i < 3; i++) {
+		int eedata = eeprom_read(ioaddr, i + 7);
+		dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15);
+		dev->dev_addr[i*2+1] = eedata >> 7;
+		prev_eedata = eedata;
+	}
+
+	dev->base_addr = (unsigned long __force) ioaddr;
+	dev->irq = irq;
+
+	np = netdev_priv(dev);
+
+	np->pci_dev = pdev;
+	pci_set_drvdata(pdev, dev);
+	np->iosize = iosize;
+	spin_lock_init(&np->lock);
+	np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
+	np->hands_off = 0;
+
+	/* Initial port:
+	 * - If the nic was configured to use an external phy and if find_mii
+	 *   finds a phy: use external port, first phy that replies.
+	 * - Otherwise: internal port.
+	 * Note that the phy address for the internal phy doesn't matter:
+	 * The address would be used to access a phy over the mii bus, but
+	 * the internal phy is accessed through mapped registers.
+	 */
+	if (readl(ioaddr + ChipConfig) & CfgExtPhy)
+		dev->if_port = PORT_MII;
+	else
+		dev->if_port = PORT_TP;
+	/* Reset the chip to erase previous misconfiguration. */
+	natsemi_reload_eeprom(dev);
+	natsemi_reset(dev);
+
+	if (dev->if_port != PORT_TP) {
+		np->phy_addr_external = find_mii(dev);
+		if (np->phy_addr_external == PHY_ADDR_NONE) {
+			dev->if_port = PORT_TP;
+			np->phy_addr_external = PHY_ADDR_INTERNAL;
+		}
+	} else {
+		np->phy_addr_external = PHY_ADDR_INTERNAL;
+	}
+
+	option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
+	if (dev->mem_start)
+		option = dev->mem_start;
+
+	/* The lower four bits are the media type. */
+	if (option) {
+		if (option & 0x200)
+			np->full_duplex = 1;
+		if (option & 15)
+			printk(KERN_INFO
+				"natsemi %s: ignoring user supplied media type %d",
+				pci_name(np->pci_dev), option & 15);
+	}
+	if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt])
+		np->full_duplex = 1;
+
+	/* The chip-specific entries in the device structure. */
+	dev->open = &netdev_open;
+	dev->hard_start_xmit = &start_tx;
+	dev->stop = &netdev_close;
+	dev->get_stats = &get_stats;
+	dev->set_multicast_list = &set_rx_mode;
+	dev->change_mtu = &natsemi_change_mtu;
+	dev->do_ioctl = &netdev_ioctl;
+	dev->tx_timeout = &tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = &natsemi_poll_controller;
+#endif
+	SET_ETHTOOL_OPS(dev, &ethtool_ops);
+
+	if (mtu)
+		dev->mtu = mtu;
+
+	netif_carrier_off(dev);
+
+	/* get the initial settings from hardware */
+	tmp            = mdio_read(dev, MII_BMCR);
+	np->speed      = (tmp & BMCR_SPEED100)? SPEED_100     : SPEED_10;
+	np->duplex     = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL   : DUPLEX_HALF;
+	np->autoneg    = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE;
+	np->advertising= mdio_read(dev, MII_ADVERTISE);
+
+	if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL
+	 && netif_msg_probe(np)) {
+		printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
+			"10%s %s duplex.\n",
+			pci_name(np->pci_dev),
+			(mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)?
+			  "enabled, advertise" : "disabled, force",
+			(np->advertising &
+			  (ADVERTISE_100FULL|ADVERTISE_100HALF))?
+			    "0" : "",
+			(np->advertising &
+			  (ADVERTISE_100FULL|ADVERTISE_10FULL))?
+			    "full" : "half");
+	}
+	if (netif_msg_probe(np))
+		printk(KERN_INFO
+			"natsemi %s: Transceiver status %#04x advertising %#04x.\n",
+			pci_name(np->pci_dev), mdio_read(dev, MII_BMSR),
+			np->advertising);
+
+	/* save the silicon revision for later querying */
+	np->srr = readl(ioaddr + SiliconRev);
+	if (netif_msg_hw(np))
+		printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n",
+				pci_name(np->pci_dev), np->srr);
+
+	i = register_netdev(dev);
+	if (i)
+		goto err_register_netdev;
+
+	if (netif_msg_drv(np)) {
+		printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ",
+			dev->name, natsemi_pci_info[chip_idx].name, iostart,
+			pci_name(np->pci_dev));
+		for (i = 0; i < ETH_ALEN-1; i++)
+				printk("%02x:", dev->dev_addr[i]);
+		printk("%02x, IRQ %d", dev->dev_addr[i], irq);
+		if (dev->if_port == PORT_TP)
+			printk(", port TP.\n");
+		else
+			printk(", port MII, phy ad %d.\n", np->phy_addr_external);
+	}
+	return 0;
+
+ err_register_netdev:
+	iounmap(ioaddr);
+
+ err_ioremap:
+	pci_release_regions(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+ err_pci_request_regions:
+	free_netdev(dev);
+	return i;
+}
+
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+   The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
+   a delay.  Note that pre-2.0.34 kernels had a cache-alignment bug that
+   made udelay() unreliable.
+   The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
+   depricated.
+*/
+#define eeprom_delay(ee_addr)	readl(ee_addr)
+
+#define EE_Write0 (EE_ChipSelect)
+#define EE_Write1 (EE_ChipSelect | EE_DataIn)
+
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+	EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+};
+
+static int eeprom_read(void __iomem *addr, int location)
+{
+	int i;
+	int retval = 0;
+	void __iomem *ee_addr = addr + EECtrl;
+	int read_cmd = location | EE_ReadCmd;
+
+	writel(EE_Write0, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		writel(dataval, ee_addr);
+		eeprom_delay(ee_addr);
+		writel(dataval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+	writel(EE_ChipSelect, ee_addr);
+	eeprom_delay(ee_addr);
+
+	for (i = 0; i < 16; i++) {
+		writel(EE_ChipSelect | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+		retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0;
+		writel(EE_ChipSelect, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	writel(EE_Write0, ee_addr);
+	writel(0, ee_addr);
+	return retval;
+}
+
+/* MII transceiver control section.
+ * The 83815 series has an internal transceiver, and we present the
+ * internal management registers as if they were MII connected.
+ * External Phy registers are referenced through the MII interface.
+ */
+
+/* clock transitions >= 20ns (25MHz)
+ * One readl should be good to PCI @ 100MHz
+ */
+#define mii_delay(ioaddr)  readl(ioaddr + EECtrl)
+
+static int mii_getbit (struct net_device *dev)
+{
+	int data;
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	writel(MII_ShiftClk, ioaddr + EECtrl);
+	data = readl(ioaddr + EECtrl);
+	writel(0, ioaddr + EECtrl);
+	mii_delay(ioaddr);
+	return (data & MII_Data)? 1 : 0;
+}
+
+static void mii_send_bits (struct net_device *dev, u32 data, int len)
+{
+	u32 i;
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	for (i = (1 << (len-1)); i; i >>= 1)
+	{
+		u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0);
+		writel(mdio_val, ioaddr + EECtrl);
+		mii_delay(ioaddr);
+		writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl);
+		mii_delay(ioaddr);
+	}
+	writel(0, ioaddr + EECtrl);
+	mii_delay(ioaddr);
+}
+
+static int miiport_read(struct net_device *dev, int phy_id, int reg)
+{
+	u32 cmd;
+	int i;
+	u32 retval = 0;
+
+	/* Ensure sync */
+	mii_send_bits (dev, 0xffffffff, 32);
+	/* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */
+	/* ST,OP = 0110'b for read operation */
+	cmd = (0x06 << 10) | (phy_id << 5) | reg;
+	mii_send_bits (dev, cmd, 14);
+	/* Turnaround */
+	if (mii_getbit (dev))
+		return 0;
+	/* Read data */
+	for (i = 0; i < 16; i++) {
+		retval <<= 1;
+		retval |= mii_getbit (dev);
+	}
+	/* End cycle */
+	mii_getbit (dev);
+	return retval;
+}
+
+static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data)
+{
+	u32 cmd;
+
+	/* Ensure sync */
+	mii_send_bits (dev, 0xffffffff, 32);
+	/* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */
+	/* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */
+	cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data;
+	mii_send_bits (dev, cmd, 32);
+	/* End cycle */
+	mii_getbit (dev);
+}
+
+static int mdio_read(struct net_device *dev, int reg)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	/* The 83815 series has two ports:
+	 * - an internal transceiver
+	 * - an external mii bus
+	 */
+	if (dev->if_port == PORT_TP)
+		return readw(ioaddr+BasicControl+(reg<<2));
+	else
+		return miiport_read(dev, np->phy_addr_external, reg);
+}
+
+static void mdio_write(struct net_device *dev, int reg, u16 data)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	/* The 83815 series has an internal transceiver; handle separately */
+	if (dev->if_port == PORT_TP)
+		writew(data, ioaddr+BasicControl+(reg<<2));
+	else
+		miiport_write(dev, np->phy_addr_external, reg, data);
+}
+
+static void init_phy_fixup(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int i;
+	u32 cfg;
+	u16 tmp;
+
+	/* restore stuff lost when power was out */
+	tmp = mdio_read(dev, MII_BMCR);
+	if (np->autoneg == AUTONEG_ENABLE) {
+		/* renegotiate if something changed */
+		if ((tmp & BMCR_ANENABLE) == 0
+		 || np->advertising != mdio_read(dev, MII_ADVERTISE))
+		{
+			/* turn on autonegotiation and force negotiation */
+			tmp |= (BMCR_ANENABLE | BMCR_ANRESTART);
+			mdio_write(dev, MII_ADVERTISE, np->advertising);
+		}
+	} else {
+		/* turn off auto negotiation, set speed and duplexity */
+		tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+		if (np->speed == SPEED_100)
+			tmp |= BMCR_SPEED100;
+		if (np->duplex == DUPLEX_FULL)
+			tmp |= BMCR_FULLDPLX;
+		/* 
+		 * Note: there is no good way to inform the link partner
+		 * that our capabilities changed. The user has to unplug
+		 * and replug the network cable after some changes, e.g.
+		 * after switching from 10HD, autoneg off to 100 HD,
+		 * autoneg off.
+		 */
+	}
+	mdio_write(dev, MII_BMCR, tmp);
+	readl(ioaddr + ChipConfig);
+	udelay(1);
+
+	/* find out what phy this is */
+	np->mii = (mdio_read(dev, MII_PHYSID1) << 16)
+				+ mdio_read(dev, MII_PHYSID2);
+
+	/* handle external phys here */
+	switch (np->mii) {
+	case PHYID_AM79C874:
+		/* phy specific configuration for fibre/tp operation */
+		tmp = mdio_read(dev, MII_MCTRL);
+		tmp &= ~(MII_FX_SEL | MII_EN_SCRM);
+		if (dev->if_port == PORT_FIBRE)
+			tmp |= MII_FX_SEL;
+		else
+			tmp |= MII_EN_SCRM;
+		mdio_write(dev, MII_MCTRL, tmp);
+		break;
+	default:
+		break;
+	}
+	cfg = readl(ioaddr + ChipConfig);
+	if (cfg & CfgExtPhy)
+		return;
+
+	/* On page 78 of the spec, they recommend some settings for "optimum
+	   performance" to be done in sequence.  These settings optimize some
+	   of the 100Mbit autodetection circuitry.  They say we only want to
+	   do this for rev C of the chip, but engineers at NSC (Bradley
+	   Kennedy) recommends always setting them.  If you don't, you get
+	   errors on some autonegotiations that make the device unusable.
+
+	   It seems that the DSP needs a few usec to reinitialize after
+	   the start of the phy. Just retry writing these values until they
+	   stick.
+	*/
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+
+		int dspcfg;
+		writew(1, ioaddr + PGSEL);
+		writew(PMDCSR_VAL, ioaddr + PMDCSR);
+		writew(TSTDAT_VAL, ioaddr + TSTDAT);
+		np->dspcfg = (np->srr <= SRR_DP83815_C)?
+			DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG));
+		writew(np->dspcfg, ioaddr + DSPCFG);
+		writew(SDCFG_VAL, ioaddr + SDCFG);
+		writew(0, ioaddr + PGSEL);
+		readl(ioaddr + ChipConfig);
+		udelay(10);
+
+		writew(1, ioaddr + PGSEL);
+		dspcfg = readw(ioaddr + DSPCFG);
+		writew(0, ioaddr + PGSEL);
+		if (np->dspcfg == dspcfg)
+			break;
+	}
+
+	if (netif_msg_link(np)) {
+		if (i==NATSEMI_HW_TIMEOUT) {
+			printk(KERN_INFO
+				"%s: DSPCFG mismatch after retrying for %d usec.\n",
+				dev->name, i*10);
+		} else {
+			printk(KERN_INFO
+				"%s: DSPCFG accepted after %d usec.\n",
+				dev->name, i*10);
+		}
+	}
+	/*
+	 * Enable PHY Specific event based interrupts.  Link state change
+	 * and Auto-Negotiation Completion are among the affected.
+	 * Read the intr status to clear it (needed for wake events).
+	 */
+	readw(ioaddr + MIntrStatus);
+	writew(MICRIntEn, ioaddr + MIntrCtrl);
+}
+
+static int switch_port_external(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	u32 cfg;
+
+	cfg = readl(ioaddr + ChipConfig);
+	if (cfg & CfgExtPhy)
+		return 0;
+
+	if (netif_msg_link(np)) {
+		printk(KERN_INFO "%s: switching to external transceiver.\n",
+				dev->name);
+	}
+
+	/* 1) switch back to external phy */
+	writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig);
+	readl(ioaddr + ChipConfig);
+	udelay(1);
+
+	/* 2) reset the external phy: */
+	/* resetting the external PHY has been known to cause a hub supplying
+	 * power over Ethernet to kill the power.  We don't want to kill
+	 * power to this computer, so we avoid resetting the phy.
+	 */
+
+	/* 3) reinit the phy fixup, it got lost during power down. */
+	move_int_phy(dev, np->phy_addr_external);
+	init_phy_fixup(dev);
+
+	return 1;
+}
+
+static int switch_port_internal(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int i;
+	u32 cfg;
+	u16 bmcr;
+
+	cfg = readl(ioaddr + ChipConfig);
+	if (!(cfg &CfgExtPhy))
+		return 0;
+
+	if (netif_msg_link(np)) {
+		printk(KERN_INFO "%s: switching to internal transceiver.\n",
+				dev->name);
+	}
+	/* 1) switch back to internal phy: */
+	cfg = cfg & ~(CfgExtPhy | CfgPhyDis);
+	writel(cfg, ioaddr + ChipConfig);
+	readl(ioaddr + ChipConfig);
+	udelay(1);
+	
+	/* 2) reset the internal phy: */
+	bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2));
+	writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2));
+	readl(ioaddr + ChipConfig);
+	udelay(10);
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2));
+		if (!(bmcr & BMCR_RESET))
+			break;
+		udelay(10);
+	}
+	if (i==NATSEMI_HW_TIMEOUT && netif_msg_link(np)) {
+		printk(KERN_INFO
+			"%s: phy reset did not complete in %d usec.\n",
+			dev->name, i*10);
+	}
+	/* 3) reinit the phy fixup, it got lost during power down. */
+	init_phy_fixup(dev);
+
+	return 1;
+}
+
+/* Scan for a PHY on the external mii bus.
+ * There are two tricky points:
+ * - Do not scan while the internal phy is enabled. The internal phy will
+ *   crash: e.g. reads from the DSPCFG register will return odd values and
+ *   the nasty random phy reset code will reset the nic every few seconds.
+ * - The internal phy must be moved around, an external phy could
+ *   have the same address as the internal phy.
+ */
+static int find_mii(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int tmp;
+	int i;
+	int did_switch;
+
+	/* Switch to external phy */
+	did_switch = switch_port_external(dev);
+		
+	/* Scan the possible phy addresses:
+	 *
+	 * PHY address 0 means that the phy is in isolate mode. Not yet
+	 * supported due to lack of test hardware. User space should
+	 * handle it through ethtool.
+	 */
+	for (i = 1; i <= 31; i++) {
+		move_int_phy(dev, i);
+		tmp = miiport_read(dev, i, MII_BMSR);
+		if (tmp != 0xffff && tmp != 0x0000) {
+			/* found something! */
+			np->mii = (mdio_read(dev, MII_PHYSID1) << 16)
+					+ mdio_read(dev, MII_PHYSID2);
+	 		if (netif_msg_probe(np)) {
+				printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n",
+						pci_name(np->pci_dev), np->mii, i);
+			}
+			break;
+		}
+	}
+	/* And switch back to internal phy: */
+	if (did_switch)
+		switch_port_internal(dev);
+	return i;
+}
+
+/* CFG bits [13:16] [18:23] */
+#define CFG_RESET_SAVE 0xfde000
+/* WCSR bits [0:4] [9:10] */
+#define WCSR_RESET_SAVE 0x61f
+/* RFCR bits [20] [22] [27:31] */
+#define RFCR_RESET_SAVE 0xf8500000;
+
+static void natsemi_reset(struct net_device *dev)
+{
+	int i;
+	u32 cfg;
+	u32 wcsr;
+	u32 rfcr;
+	u16 pmatch[3];
+	u16 sopass[3];
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	/*
+	 * Resetting the chip causes some registers to be lost.
+	 * Natsemi suggests NOT reloading the EEPROM while live, so instead
+	 * we save the state that would have been loaded from EEPROM
+	 * on a normal power-up (see the spec EEPROM map).  This assumes
+	 * whoever calls this will follow up with init_registers() eventually.
+	 */
+
+	/* CFG */
+	cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE;
+	/* WCSR */
+	wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE;
+	/* RFCR */
+	rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE;
+	/* PMATCH */
+	for (i = 0; i < 3; i++) {
+		writel(i*2, ioaddr + RxFilterAddr);
+		pmatch[i] = readw(ioaddr + RxFilterData);
+	}
+	/* SOPAS */
+	for (i = 0; i < 3; i++) {
+		writel(0xa+(i*2), ioaddr + RxFilterAddr);
+		sopass[i] = readw(ioaddr + RxFilterData);
+	}
+
+	/* now whack the chip */
+	writel(ChipReset, ioaddr + ChipCmd);
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		if (!(readl(ioaddr + ChipCmd) & ChipReset))
+			break;
+		udelay(5);
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "%s: reset did not complete in %d usec.\n",
+			dev->name, i*5);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_DEBUG "%s: reset completed in %d usec.\n",
+			dev->name, i*5);
+	}
+
+	/* restore CFG */
+	cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE;
+	/* turn on external phy if it was selected */
+	if (dev->if_port == PORT_TP)
+		cfg &= ~(CfgExtPhy | CfgPhyDis);
+	else
+		cfg |= (CfgExtPhy | CfgPhyDis);
+	writel(cfg, ioaddr + ChipConfig);
+	/* restore WCSR */
+	wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE;
+	writel(wcsr, ioaddr + WOLCmd);
+	/* read RFCR */
+	rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE;
+	/* restore PMATCH */
+	for (i = 0; i < 3; i++) {
+		writel(i*2, ioaddr + RxFilterAddr);
+		writew(pmatch[i], ioaddr + RxFilterData);
+	}
+	for (i = 0; i < 3; i++) {
+		writel(0xa+(i*2), ioaddr + RxFilterAddr);
+		writew(sopass[i], ioaddr + RxFilterData);
+	}
+	/* restore RFCR */
+	writel(rfcr, ioaddr + RxFilterAddr);
+}
+
+static void natsemi_reload_eeprom(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int i;
+
+	writel(EepromReload, ioaddr + PCIBusCfg);
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		udelay(50);
+		if (!(readl(ioaddr + PCIBusCfg) & EepromReload))
+			break;
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n",
+			pci_name(np->pci_dev), i*50);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n",
+			pci_name(np->pci_dev), i*50);
+	}
+}
+
+static void natsemi_stop_rxtx(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	writel(RxOff | TxOff, ioaddr + ChipCmd);
+	for(i=0;i< NATSEMI_HW_TIMEOUT;i++) {
+		if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0)
+			break;
+		udelay(5);
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n",
+			dev->name, i*5);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n",
+			dev->name, i*5);
+	}
+}
+
+static int netdev_open(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int i;
+
+	/* Reset the chip, just in case. */
+	natsemi_reset(dev);
+
+	i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+	if (i) return i;
+
+	if (netif_msg_ifup(np))
+		printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
+			dev->name, dev->irq);
+	i = alloc_ring(dev);
+	if (i < 0) {
+		free_irq(dev->irq, dev);
+		return i;
+	}
+	init_ring(dev);
+	spin_lock_irq(&np->lock);
+	init_registers(dev);
+	/* now set the MAC address according to dev->dev_addr */
+	for (i = 0; i < 3; i++) {
+		u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i];
+
+		writel(i*2, ioaddr + RxFilterAddr);
+		writew(mac, ioaddr + RxFilterData);
+	}
+	writel(np->cur_rx_mode, ioaddr + RxFilterAddr);
+	spin_unlock_irq(&np->lock);
+
+	netif_start_queue(dev);
+
+	if (netif_msg_ifup(np))
+		printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n",
+			dev->name, (int)readl(ioaddr + ChipCmd));
+
+	/* Set the timer to check for link beat. */
+	init_timer(&np->timer);
+	np->timer.expires = jiffies + NATSEMI_TIMER_FREQ;
+	np->timer.data = (unsigned long)dev;
+	np->timer.function = &netdev_timer; /* timer handler */
+	add_timer(&np->timer);
+
+	return 0;
+}
+
+static void do_cable_magic(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	if (dev->if_port != PORT_TP)
+		return;
+
+	if (np->srr >= SRR_DP83816_A5)
+		return;
+
+	/*
+	 * 100 MBit links with short cables can trip an issue with the chip.
+	 * The problem manifests as lots of CRC errors and/or flickering
+	 * activity LED while idle.  This process is based on instructions
+	 * from engineers at National.
+	 */
+	if (readl(ioaddr + ChipConfig) & CfgSpeed100) {
+		u16 data;
+
+		writew(1, ioaddr + PGSEL);
+		/*
+		 * coefficient visibility should already be enabled via
+		 * DSPCFG | 0x1000
+		 */
+		data = readw(ioaddr + TSTDAT) & 0xff;
+		/*
+		 * the value must be negative, and within certain values
+		 * (these values all come from National)
+		 */
+		if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) {
+			struct netdev_private *np = netdev_priv(dev);
+
+			/* the bug has been triggered - fix the coefficient */
+			writew(TSTDAT_FIXED, ioaddr + TSTDAT);
+			/* lock the value */
+			data = readw(ioaddr + DSPCFG);
+			np->dspcfg = data | DSPCFG_LOCK;
+			writew(np->dspcfg, ioaddr + DSPCFG);
+		}
+		writew(0, ioaddr + PGSEL);
+	}
+}
+
+static void undo_cable_magic(struct net_device *dev)
+{
+	u16 data;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	if (dev->if_port != PORT_TP)
+		return;
+
+	if (np->srr >= SRR_DP83816_A5)
+		return;
+
+	writew(1, ioaddr + PGSEL);
+	/* make sure the lock bit is clear */
+	data = readw(ioaddr + DSPCFG);
+	np->dspcfg = data & ~DSPCFG_LOCK;
+	writew(np->dspcfg, ioaddr + DSPCFG);
+	writew(0, ioaddr + PGSEL);
+}
+
+static void check_link(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int duplex;
+	u16 bmsr;
+       
+	/* The link status field is latched: it remains low after a temporary
+	 * link failure until it's read. We need the current link status,
+	 * thus read twice.
+	 */
+	mdio_read(dev, MII_BMSR);
+	bmsr = mdio_read(dev, MII_BMSR);
+
+	if (!(bmsr & BMSR_LSTATUS)) {
+		if (netif_carrier_ok(dev)) {
+			if (netif_msg_link(np))
+				printk(KERN_NOTICE "%s: link down.\n",
+					dev->name);
+			netif_carrier_off(dev);
+			undo_cable_magic(dev);
+		}
+		return;
+	}
+	if (!netif_carrier_ok(dev)) {
+		if (netif_msg_link(np))
+			printk(KERN_NOTICE "%s: link up.\n", dev->name);
+		netif_carrier_on(dev);
+		do_cable_magic(dev);
+	}
+
+	duplex = np->full_duplex;
+	if (!duplex) {
+		if (bmsr & BMSR_ANEGCOMPLETE) {
+			int tmp = mii_nway_result(
+				np->advertising & mdio_read(dev, MII_LPA));
+			if (tmp == LPA_100FULL || tmp == LPA_10FULL)
+				duplex = 1;
+		} else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX)
+			duplex = 1;
+	}
+
+	/* if duplex is set then bit 28 must be set, too */
+	if (duplex ^ !!(np->rx_config & RxAcceptTx)) {
+		if (netif_msg_link(np))
+			printk(KERN_INFO
+				"%s: Setting %s-duplex based on negotiated "
+				"link capability.\n", dev->name,
+				duplex ? "full" : "half");
+		if (duplex) {
+			np->rx_config |= RxAcceptTx;
+			np->tx_config |= TxCarrierIgn | TxHeartIgn;
+		} else {
+			np->rx_config &= ~RxAcceptTx;
+			np->tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+		}
+		writel(np->tx_config, ioaddr + TxConfig);
+		writel(np->rx_config, ioaddr + RxConfig);
+	}
+}
+
+static void init_registers(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	init_phy_fixup(dev);
+
+	/* clear any interrupts that are pending, such as wake events */
+	readl(ioaddr + IntrStatus);
+
+	writel(np->ring_dma, ioaddr + RxRingPtr);
+	writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc),
+		ioaddr + TxRingPtr);
+
+	/* Initialize other registers.
+	 * Configure the PCI bus bursts and FIFO thresholds.
+	 * Configure for standard, in-spec Ethernet.
+	 * Start with half-duplex. check_link will update
+	 * to the correct settings.
+	 */
+
+	/* DRTH: 2: start tx if 64 bytes are in the fifo
+	 * FLTH: 0x10: refill with next packet if 512 bytes are free
+	 * MXDMA: 0: up to 256 byte bursts.
+	 * 	MXDMA must be <= FLTH
+	 * ECRETRY=1
+	 * ATP=1
+	 */
+	np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 |
+				TX_FLTH_VAL | TX_DRTH_VAL_START;
+	writel(np->tx_config, ioaddr + TxConfig);
+
+	/* DRTH 0x10: start copying to memory if 128 bytes are in the fifo
+	 * MXDMA 0: up to 256 byte bursts
+	 */
+	np->rx_config = RxMxdma_256 | RX_DRTH_VAL;
+	/* if receive ring now has bigger buffers than normal, enable jumbo */
+	if (np->rx_buf_sz > NATSEMI_LONGPKT)
+		np->rx_config |= RxAcceptLong;
+
+	writel(np->rx_config, ioaddr + RxConfig);
+
+	/* Disable PME:
+	 * The PME bit is initialized from the EEPROM contents.
+	 * PCI cards probably have PME disabled, but motherboard
+	 * implementations may have PME set to enable WakeOnLan.
+	 * With PME set the chip will scan incoming packets but
+	 * nothing will be written to memory. */
+	np->SavedClkRun = readl(ioaddr + ClkRun);
+	writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun);
+	if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) {
+		printk(KERN_NOTICE "%s: Wake-up event %#08x\n",
+			dev->name, readl(ioaddr + WOLCmd));
+	}
+
+	check_link(dev);
+	__set_rx_mode(dev);
+
+	/* Enable interrupts by setting the interrupt mask. */
+	writel(DEFAULT_INTR, ioaddr + IntrMask);
+	writel(1, ioaddr + IntrEnable);
+
+	writel(RxOn | TxOn, ioaddr + ChipCmd);
+	writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */
+}
+
+/*
+ * netdev_timer:
+ * Purpose:
+ * 1) check for link changes. Usually they are handled by the MII interrupt
+ *    but it doesn't hurt to check twice.
+ * 2) check for sudden death of the NIC:
+ *    It seems that a reference set for this chip went out with incorrect info,
+ *    and there exist boards that aren't quite right.  An unexpected voltage
+ *    drop can cause the PHY to get itself in a weird state (basically reset).
+ *    NOTE: this only seems to affect revC chips.
+ * 3) check of death of the RX path due to OOM
+ */
+static void netdev_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int next_tick = 5*HZ;
+
+	if (netif_msg_timer(np)) {
+		/* DO NOT read the IntrStatus register,
+		 * a read clears any pending interrupts.
+		 */
+		printk(KERN_DEBUG "%s: Media selection timer tick.\n",
+			dev->name);
+	}
+
+	if (dev->if_port == PORT_TP) {
+		u16 dspcfg;
+
+		spin_lock_irq(&np->lock);
+		/* check for a nasty random phy-reset - use dspcfg as a flag */
+		writew(1, ioaddr+PGSEL);
+		dspcfg = readw(ioaddr+DSPCFG);
+		writew(0, ioaddr+PGSEL);
+		if (dspcfg != np->dspcfg) {
+			if (!netif_queue_stopped(dev)) {
+				spin_unlock_irq(&np->lock);
+				if (netif_msg_hw(np))
+					printk(KERN_NOTICE "%s: possible phy reset: "
+						"re-initializing\n", dev->name);
+				disable_irq(dev->irq);
+				spin_lock_irq(&np->lock);
+				natsemi_stop_rxtx(dev);
+				dump_ring(dev);
+				reinit_ring(dev);
+				init_registers(dev);
+				spin_unlock_irq(&np->lock);
+				enable_irq(dev->irq);
+			} else {
+				/* hurry back */
+				next_tick = HZ;
+				spin_unlock_irq(&np->lock);
+			}
+		} else {
+			/* init_registers() calls check_link() for the above case */
+			check_link(dev);
+			spin_unlock_irq(&np->lock);
+		}
+	} else {
+		spin_lock_irq(&np->lock);
+		check_link(dev);
+		spin_unlock_irq(&np->lock);
+	}
+	if (np->oom) {
+		disable_irq(dev->irq);
+		np->oom = 0;
+		refill_rx(dev);
+		enable_irq(dev->irq);
+		if (!np->oom) {
+			writel(RxOn, ioaddr + ChipCmd);
+		} else {
+			next_tick = 1;
+		}
+	}
+	mod_timer(&np->timer, jiffies + next_tick);
+}
+
+static void dump_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (netif_msg_pktdata(np)) {
+		int i;
+		printk(KERN_DEBUG "  Tx ring at %p:\n", np->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++) {
+			printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
+				i, np->tx_ring[i].next_desc,
+				np->tx_ring[i].cmd_status,
+				np->tx_ring[i].addr);
+		}
+		printk(KERN_DEBUG "  Rx ring %p:\n", np->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
+				i, np->rx_ring[i].next_desc,
+				np->rx_ring[i].cmd_status,
+				np->rx_ring[i].addr);
+		}
+	}
+}
+
+static void tx_timeout(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	disable_irq(dev->irq);
+	spin_lock_irq(&np->lock);
+	if (!np->hands_off) {
+		if (netif_msg_tx_err(np))
+			printk(KERN_WARNING
+				"%s: Transmit timed out, status %#08x,"
+				" resetting...\n",
+				dev->name, readl(ioaddr + IntrStatus));
+		dump_ring(dev);
+
+		natsemi_reset(dev);
+		reinit_ring(dev);
+		init_registers(dev);
+	} else {
+		printk(KERN_WARNING
+			"%s: tx_timeout while in hands_off state?\n",
+			dev->name);
+	}
+	spin_unlock_irq(&np->lock);
+	enable_irq(dev->irq);
+
+	dev->trans_start = jiffies;
+	np->stats.tx_errors++;
+	netif_wake_queue(dev);
+}
+
+static int alloc_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	np->rx_ring = pci_alloc_consistent(np->pci_dev,
+		sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE),
+		&np->ring_dma);
+	if (!np->rx_ring)
+		return -ENOMEM;
+	np->tx_ring = &np->rx_ring[RX_RING_SIZE];
+	return 0;
+}
+
+static void refill_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	/* Refill the Rx ring buffers. */
+	for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
+		struct sk_buff *skb;
+		int entry = np->dirty_rx % RX_RING_SIZE;
+		if (np->rx_skbuff[entry] == NULL) {
+			unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING;
+			skb = dev_alloc_skb(buflen);
+			np->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break; /* Better luck next round. */
+			skb->dev = dev; /* Mark as being used by this device. */
+			np->rx_dma[entry] = pci_map_single(np->pci_dev,
+				skb->tail, buflen, PCI_DMA_FROMDEVICE);
+			np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]);
+		}
+		np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz);
+	}
+	if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) {
+		if (netif_msg_rx_err(np))
+			printk(KERN_WARNING "%s: going OOM.\n", dev->name);
+		np->oom = 1;
+	}
+}
+
+static void set_bufsize(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	if (dev->mtu <= ETH_DATA_LEN)
+		np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS;
+	else
+		np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS;
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void init_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	/* 1) TX ring */
+	np->dirty_tx = np->cur_tx = 0;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		np->tx_skbuff[i] = NULL;
+		np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma
+			+sizeof(struct netdev_desc)
+			*((i+1)%TX_RING_SIZE+RX_RING_SIZE));
+		np->tx_ring[i].cmd_status = 0;
+	}
+
+	/* 2) RX ring */
+	np->dirty_rx = 0;
+	np->cur_rx = RX_RING_SIZE;
+	np->oom = 0;
+	set_bufsize(dev);
+
+	np->rx_head_desc = &np->rx_ring[0];
+
+	/* Please be carefull before changing this loop - at least gcc-2.95.1
+	 * miscompiles it otherwise.
+	 */
+	/* Initialize all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma
+				+sizeof(struct netdev_desc)
+				*((i+1)%RX_RING_SIZE));
+		np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn);
+		np->rx_skbuff[i] = NULL;
+	}
+	refill_rx(dev);
+	dump_ring(dev);
+}
+
+static void drain_tx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		if (np->tx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+				np->tx_dma[i], np->tx_skbuff[i]->len,
+				PCI_DMA_TODEVICE);
+			dev_kfree_skb(np->tx_skbuff[i]);
+			np->stats.tx_dropped++;
+		}
+		np->tx_skbuff[i] = NULL;
+	}
+}
+
+static void drain_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	unsigned int buflen = np->rx_buf_sz;
+	int i;
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].cmd_status = 0;
+		np->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */
+		if (np->rx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+				np->rx_dma[i], buflen,
+				PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(np->rx_skbuff[i]);
+		}
+		np->rx_skbuff[i] = NULL;
+	}
+}
+
+static void drain_ring(struct net_device *dev)
+{
+	drain_rx(dev);
+	drain_tx(dev);
+}
+
+static void free_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	pci_free_consistent(np->pci_dev,
+		sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE),
+		np->rx_ring, np->ring_dma);
+}
+
+static void reinit_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	/* RX Ring */
+	np->dirty_rx = 0;
+	np->cur_rx = RX_RING_SIZE;
+	np->rx_head_desc = &np->rx_ring[0];
+	/* Initialize all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++)
+		np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn);
+
+	refill_rx(dev);
+}
+
+static void reinit_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	/* drain TX ring */
+	drain_tx(dev);
+	np->dirty_tx = np->cur_tx = 0;
+	for (i=0;i<TX_RING_SIZE;i++)
+		np->tx_ring[i].cmd_status = 0;
+
+	reinit_rx(dev);
+}
+
+static int start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	unsigned entry;
+
+	/* Note: Ordering is important here, set the field with the
+	   "ownership" bit last, and only then increment cur_tx. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = np->cur_tx % TX_RING_SIZE;
+
+	np->tx_skbuff[entry] = skb;
+	np->tx_dma[entry] = pci_map_single(np->pci_dev,
+				skb->data,skb->len, PCI_DMA_TODEVICE);
+
+	np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]);
+
+	spin_lock_irq(&np->lock);
+
+	if (!np->hands_off) {
+		np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len);
+		/* StrongARM: Explicitly cache flush np->tx_ring and
+		 * skb->data,skb->len. */
+		wmb();
+		np->cur_tx++;
+		if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) {
+			netdev_tx_done(dev);
+			if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1)
+				netif_stop_queue(dev);
+		}
+		/* Wake the potentially-idle transmit channel. */
+		writel(TxOn, ioaddr + ChipCmd);
+	} else {
+		dev_kfree_skb_irq(skb);
+		np->stats.tx_dropped++;
+	}
+	spin_unlock_irq(&np->lock);
+
+	dev->trans_start = jiffies;
+
+	if (netif_msg_tx_queued(np)) {
+		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
+			dev->name, np->cur_tx, entry);
+	}
+	return 0;
+}
+
+static void netdev_tx_done(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+		int entry = np->dirty_tx % TX_RING_SIZE;
+		if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn))
+			break;
+		if (netif_msg_tx_done(np))
+			printk(KERN_DEBUG
+				"%s: tx frame #%d finished, status %#08x.\n",
+					dev->name, np->dirty_tx,
+					le32_to_cpu(np->tx_ring[entry].cmd_status));
+		if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) {
+			np->stats.tx_packets++;
+			np->stats.tx_bytes += np->tx_skbuff[entry]->len;
+		} else { /* Various Tx errors */
+			int tx_status =
+				le32_to_cpu(np->tx_ring[entry].cmd_status);
+			if (tx_status & (DescTxAbort|DescTxExcColl))
+				np->stats.tx_aborted_errors++;
+			if (tx_status & DescTxFIFO)
+				np->stats.tx_fifo_errors++;
+			if (tx_status & DescTxCarrier)
+				np->stats.tx_carrier_errors++;
+			if (tx_status & DescTxOOWCol)
+				np->stats.tx_window_errors++;
+			np->stats.tx_errors++;
+		}
+		pci_unmap_single(np->pci_dev,np->tx_dma[entry],
+					np->tx_skbuff[entry]->len,
+					PCI_DMA_TODEVICE);
+		/* Free the original skb. */
+		dev_kfree_skb_irq(np->tx_skbuff[entry]);
+		np->tx_skbuff[entry] = NULL;
+	}
+	if (netif_queue_stopped(dev)
+		&& np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
+		/* The ring is no longer full, wake queue. */
+		netif_wake_queue(dev);
+	}
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs)
+{
+	struct net_device *dev = dev_instance;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int boguscnt = max_interrupt_work;
+	unsigned int handled = 0;
+
+	if (np->hands_off)
+		return IRQ_NONE;
+	do {
+		/* Reading automatically acknowledges all int sources. */
+		u32 intr_status = readl(ioaddr + IntrStatus);
+
+		if (netif_msg_intr(np))
+			printk(KERN_DEBUG
+				"%s: Interrupt, status %#08x, mask %#08x.\n",
+				dev->name, intr_status,
+				readl(ioaddr + IntrMask));
+
+		if (intr_status == 0)
+			break;
+		handled = 1;
+
+		if (intr_status &
+		   (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
+		    IntrRxErr | IntrRxOverrun)) {
+			netdev_rx(dev);
+		}
+
+		if (intr_status &
+		   (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
+			spin_lock(&np->lock);
+			netdev_tx_done(dev);
+			spin_unlock(&np->lock);
+		}
+
+		/* Abnormal error summary/uncommon events handlers. */
+		if (intr_status & IntrAbnormalSummary)
+			netdev_error(dev, intr_status);
+
+		if (--boguscnt < 0) {
+			if (netif_msg_intr(np))
+				printk(KERN_WARNING
+					"%s: Too much work at interrupt, "
+					"status=%#08x.\n",
+					dev->name, intr_status);
+			break;
+		}
+	} while (1);
+
+	if (netif_msg_intr(np))
+		printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name);
+
+	return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but separated
+   for clarity and better register allocation. */
+static void netdev_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int entry = np->cur_rx % RX_RING_SIZE;
+	int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
+	s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status);
+	unsigned int buflen = np->rx_buf_sz;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* If the driver owns the next entry it's a new packet. Send it up. */
+	while (desc_status < 0) { /* e.g. & DescOwn */
+		int pkt_len;
+		if (netif_msg_rx_status(np))
+			printk(KERN_DEBUG
+				"  netdev_rx() entry %d status was %#08x.\n",
+				entry, desc_status);
+		if (--boguscnt < 0)
+			break;
+		pkt_len = (desc_status & DescSizeMask) - 4;
+		if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
+			if (desc_status & DescMore) {
+				if (netif_msg_rx_err(np))
+					printk(KERN_WARNING
+						"%s: Oversized(?) Ethernet "
+						"frame spanned multiple "
+						"buffers, entry %#08x "
+						"status %#08x.\n", dev->name,
+						np->cur_rx, desc_status);
+				np->stats.rx_length_errors++;
+			} else {
+				/* There was an error. */
+				np->stats.rx_errors++;
+				if (desc_status & (DescRxAbort|DescRxOver))
+					np->stats.rx_over_errors++;
+				if (desc_status & (DescRxLong|DescRxRunt))
+					np->stats.rx_length_errors++;
+				if (desc_status & (DescRxInvalid|DescRxAlign))
+					np->stats.rx_frame_errors++;
+				if (desc_status & DescRxCRC)
+					np->stats.rx_crc_errors++;
+			}
+		} else if (pkt_len > np->rx_buf_sz) {
+			/* if this is the tail of a double buffer
+			 * packet, we've already counted the error
+			 * on the first part.  Ignore the second half.
+			 */
+		} else {
+			struct sk_buff *skb;
+			/* Omit CRC size. */
+			/* Check if the packet is long enough to accept
+			 * without copying to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak
+			    && (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) {
+				skb->dev = dev;
+				/* 16 byte align the IP header */
+				skb_reserve(skb, RX_OFFSET);
+				pci_dma_sync_single_for_cpu(np->pci_dev,
+					np->rx_dma[entry],
+					buflen,
+					PCI_DMA_FROMDEVICE);
+				eth_copy_and_sum(skb,
+					np->rx_skbuff[entry]->tail, pkt_len, 0);
+				skb_put(skb, pkt_len);
+				pci_dma_sync_single_for_device(np->pci_dev,
+					np->rx_dma[entry],
+					buflen,
+					PCI_DMA_FROMDEVICE);
+			} else {
+				pci_unmap_single(np->pci_dev, np->rx_dma[entry],
+					buflen, PCI_DMA_FROMDEVICE);
+				skb_put(skb = np->rx_skbuff[entry], pkt_len);
+				np->rx_skbuff[entry] = NULL;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			np->stats.rx_packets++;
+			np->stats.rx_bytes += pkt_len;
+		}
+		entry = (++np->cur_rx) % RX_RING_SIZE;
+		np->rx_head_desc = &np->rx_ring[entry];
+		desc_status = le32_to_cpu(np->rx_head_desc->cmd_status);
+	}
+	refill_rx(dev);
+
+	/* Restart Rx engine if stopped. */
+	if (np->oom)
+		mod_timer(&np->timer, jiffies + 1);
+	else
+		writel(RxOn, ioaddr + ChipCmd);
+}
+
+static void netdev_error(struct net_device *dev, int intr_status)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	spin_lock(&np->lock);
+	if (intr_status & LinkChange) {
+		u16 lpa = mdio_read(dev, MII_LPA);
+		if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE
+		 && netif_msg_link(np)) {
+			printk(KERN_INFO
+				"%s: Autonegotiation advertising"
+				" %#04x  partner %#04x.\n", dev->name,
+				np->advertising, lpa);
+		}
+
+		/* read MII int status to clear the flag */
+		readw(ioaddr + MIntrStatus);
+		check_link(dev);
+	}
+	if (intr_status & StatsMax) {
+		__get_stats(dev);
+	}
+	if (intr_status & IntrTxUnderrun) {
+		if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) {
+			np->tx_config += TX_DRTH_VAL_INC;
+			if (netif_msg_tx_err(np))
+				printk(KERN_NOTICE
+					"%s: increased tx threshold, txcfg %#08x.\n",
+					dev->name, np->tx_config);
+		} else {
+			if (netif_msg_tx_err(np))
+				printk(KERN_NOTICE
+					"%s: tx underrun with maximum tx threshold, txcfg %#08x.\n",
+					dev->name, np->tx_config);
+		}
+		writel(np->tx_config, ioaddr + TxConfig);
+	}
+	if (intr_status & WOLPkt && netif_msg_wol(np)) {
+		int wol_status = readl(ioaddr + WOLCmd);
+		printk(KERN_NOTICE "%s: Link wake-up event %#08x\n",
+			dev->name, wol_status);
+	}
+	if (intr_status & RxStatusFIFOOver) {
+		if (netif_msg_rx_err(np) && netif_msg_intr(np)) {
+			printk(KERN_NOTICE "%s: Rx status FIFO overrun\n",
+				dev->name);
+		}
+		np->stats.rx_fifo_errors++;
+	}
+	/* Hmmmmm, it's not clear how to recover from PCI faults. */
+	if (intr_status & IntrPCIErr) {
+		printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
+			intr_status & IntrPCIErr);
+		np->stats.tx_fifo_errors++;
+		np->stats.rx_fifo_errors++;
+	}
+	spin_unlock(&np->lock);
+}
+
+static void __get_stats(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+
+	/* The chip only need report frame silently dropped. */
+	np->stats.rx_crc_errors	+= readl(ioaddr + RxCRCErrs);
+	np->stats.rx_missed_errors += readl(ioaddr + RxMissed);
+}
+
+static struct net_device_stats *get_stats(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	/* The chip only need report frame silently dropped. */
+	spin_lock_irq(&np->lock);
+	if (netif_running(dev) && !np->hands_off)
+		__get_stats(dev);
+	spin_unlock_irq(&np->lock);
+
+	return &np->stats;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void natsemi_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	intr_handler(dev->irq, dev, NULL);
+	enable_irq(dev->irq);
+}
+#endif
+
+#define HASH_TABLE	0x200
+static void __set_rx_mode(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+	u8 mc_filter[64]; /* Multicast hash filter */
+	u32 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+		/* Unconditionally log net taps. */
+		printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+			dev->name);
+		rx_mode = RxFilterEnable | AcceptBroadcast
+			| AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys;
+	} else if ((dev->mc_count > multicast_filter_limit)
+	  || (dev->flags & IFF_ALLMULTI)) {
+		rx_mode = RxFilterEnable | AcceptBroadcast
+			| AcceptAllMulticast | AcceptMyPhys;
+	} else {
+		struct dev_mc_list *mclist;
+		int i;
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+			 i++, mclist = mclist->next) {
+			int i = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
+			mc_filter[i/8] |= (1 << (i & 0x07));
+		}
+		rx_mode = RxFilterEnable | AcceptBroadcast
+			| AcceptMulticast | AcceptMyPhys;
+		for (i = 0; i < 64; i += 2) {
+			writew(HASH_TABLE + i, ioaddr + RxFilterAddr);
+			writew((mc_filter[i+1]<<8) + mc_filter[i],
+				ioaddr + RxFilterData);
+		}
+	}
+	writel(rx_mode, ioaddr + RxFilterAddr);
+	np->cur_rx_mode = rx_mode;
+}
+
+static int natsemi_change_mtu(struct net_device *dev, int new_mtu)
+{
+	if (new_mtu < 64 || new_mtu > NATSEMI_RX_LIMIT-NATSEMI_HEADERS)
+		return -EINVAL;
+
+	dev->mtu = new_mtu;
+
+	/* synchronized against open : rtnl_lock() held by caller */
+	if (netif_running(dev)) {
+		struct netdev_private *np = netdev_priv(dev);
+		void __iomem * ioaddr = ns_ioaddr(dev);
+
+		disable_irq(dev->irq);
+		spin_lock(&np->lock);
+		/* stop engines */
+		natsemi_stop_rxtx(dev);
+		/* drain rx queue */
+		drain_rx(dev);
+		/* change buffers */
+		set_bufsize(dev);
+		reinit_rx(dev);
+		writel(np->ring_dma, ioaddr + RxRingPtr);
+		/* restart engines */
+		writel(RxOn | TxOn, ioaddr + ChipCmd);
+		spin_unlock(&np->lock);
+		enable_irq(dev->irq);
+	}
+	return 0;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	if (!np->hands_off)
+		__set_rx_mode(dev);
+	spin_unlock_irq(&np->lock);
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	strncpy(info->driver, DRV_NAME, ETHTOOL_BUSINFO_LEN);
+	strncpy(info->version, DRV_VERSION, ETHTOOL_BUSINFO_LEN);
+	strncpy(info->bus_info, pci_name(np->pci_dev), ETHTOOL_BUSINFO_LEN);
+}
+
+static int get_regs_len(struct net_device *dev)
+{
+	return NATSEMI_REGS_SIZE;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+	return NATSEMI_EEPROM_SIZE;
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	netdev_get_ecmd(dev, ecmd);
+	spin_unlock_irq(&np->lock);
+	return 0;
+}
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int res;
+	spin_lock_irq(&np->lock);
+	res = netdev_set_ecmd(dev, ecmd);
+	spin_unlock_irq(&np->lock);
+	return res;
+}
+
+static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	netdev_get_wol(dev, &wol->supported, &wol->wolopts);
+	netdev_get_sopass(dev, wol->sopass);
+	spin_unlock_irq(&np->lock);
+}
+
+static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int res;
+	spin_lock_irq(&np->lock);
+	netdev_set_wol(dev, wol->wolopts);
+	res = netdev_set_sopass(dev, wol->sopass);
+	spin_unlock_irq(&np->lock);
+	return res;
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	regs->version = NATSEMI_REGS_VER;
+	spin_lock_irq(&np->lock);
+	netdev_get_regs(dev, buf);
+	spin_unlock_irq(&np->lock);
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return np->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	np->msg_enable = val;
+}
+
+static int nway_reset(struct net_device *dev)
+{
+	int tmp;
+	int r = -EINVAL;
+	/* if autoneg is off, it's an error */
+	tmp = mdio_read(dev, MII_BMCR);
+	if (tmp & BMCR_ANENABLE) {
+		tmp |= (BMCR_ANRESTART);
+		mdio_write(dev, MII_BMCR, tmp);
+		r = 0;
+	}
+	return r;
+}
+
+static u32 get_link(struct net_device *dev)
+{
+	/* LSTATUS is latched low until a read - so read twice */
+	mdio_read(dev, MII_BMSR);
+	return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
+}
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u8 eebuf[NATSEMI_EEPROM_SIZE];
+	int res;
+
+	eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16);
+	spin_lock_irq(&np->lock);
+	res = netdev_get_eeprom(dev, eebuf);
+	spin_unlock_irq(&np->lock);
+	if (!res)
+		memcpy(data, eebuf+eeprom->offset, eeprom->len);
+	return res;
+}
+
+static struct ethtool_ops ethtool_ops = {
+	.get_drvinfo = get_drvinfo,
+	.get_regs_len = get_regs_len,
+	.get_eeprom_len = get_eeprom_len,
+	.get_settings = get_settings,
+	.set_settings = set_settings,
+	.get_wol = get_wol,
+	.set_wol = set_wol,
+	.get_regs = get_regs,
+	.get_msglevel = get_msglevel,
+	.set_msglevel = set_msglevel,
+	.nway_reset = nway_reset,
+	.get_link = get_link,
+	.get_eeprom = get_eeprom,
+};
+
+static int netdev_set_wol(struct net_device *dev, u32 newval)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary;
+
+	/* translate to bitmasks this chip understands */
+	if (newval & WAKE_PHY)
+		data |= WakePhy;
+	if (newval & WAKE_UCAST)
+		data |= WakeUnicast;
+	if (newval & WAKE_MCAST)
+		data |= WakeMulticast;
+	if (newval & WAKE_BCAST)
+		data |= WakeBroadcast;
+	if (newval & WAKE_ARP)
+		data |= WakeArp;
+	if (newval & WAKE_MAGIC)
+		data |= WakeMagic;
+	if (np->srr >= SRR_DP83815_D) {
+		if (newval & WAKE_MAGICSECURE) {
+			data |= WakeMagicSecure;
+		}
+	}
+
+	writel(data, ioaddr + WOLCmd);
+
+	return 0;
+}
+
+static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u32 regval = readl(ioaddr + WOLCmd);
+
+	*supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST
+			| WAKE_ARP | WAKE_MAGIC);
+
+	if (np->srr >= SRR_DP83815_D) {
+		/* SOPASS works on revD and higher */
+		*supported |= WAKE_MAGICSECURE;
+	}
+	*cur = 0;
+
+	/* translate from chip bitmasks */
+	if (regval & WakePhy)
+		*cur |= WAKE_PHY;
+	if (regval & WakeUnicast)
+		*cur |= WAKE_UCAST;
+	if (regval & WakeMulticast)
+		*cur |= WAKE_MCAST;
+	if (regval & WakeBroadcast)
+		*cur |= WAKE_BCAST;
+	if (regval & WakeArp)
+		*cur |= WAKE_ARP;
+	if (regval & WakeMagic)
+		*cur |= WAKE_MAGIC;
+	if (regval & WakeMagicSecure) {
+		/* this can be on in revC, but it's broken */
+		*cur |= WAKE_MAGICSECURE;
+	}
+
+	return 0;
+}
+
+static int netdev_set_sopass(struct net_device *dev, u8 *newval)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u16 *sval = (u16 *)newval;
+	u32 addr;
+
+	if (np->srr < SRR_DP83815_D) {
+		return 0;
+	}
+
+	/* enable writing to these registers by disabling the RX filter */
+	addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask;
+	addr &= ~RxFilterEnable;
+	writel(addr, ioaddr + RxFilterAddr);
+
+	/* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */
+	writel(addr | 0xa, ioaddr + RxFilterAddr);
+	writew(sval[0], ioaddr + RxFilterData);
+
+	writel(addr | 0xc, ioaddr + RxFilterAddr);
+	writew(sval[1], ioaddr + RxFilterData);
+
+	writel(addr | 0xe, ioaddr + RxFilterAddr);
+	writew(sval[2], ioaddr + RxFilterData);
+
+	/* re-enable the RX filter */
+	writel(addr | RxFilterEnable, ioaddr + RxFilterAddr);
+
+	return 0;
+}
+
+static int netdev_get_sopass(struct net_device *dev, u8 *data)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u16 *sval = (u16 *)data;
+	u32 addr;
+
+	if (np->srr < SRR_DP83815_D) {
+		sval[0] = sval[1] = sval[2] = 0;
+		return 0;
+	}
+
+	/* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */
+	addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask;
+
+	writel(addr | 0xa, ioaddr + RxFilterAddr);
+	sval[0] = readw(ioaddr + RxFilterData);
+
+	writel(addr | 0xc, ioaddr + RxFilterAddr);
+	sval[1] = readw(ioaddr + RxFilterData);
+
+	writel(addr | 0xe, ioaddr + RxFilterAddr);
+	sval[2] = readw(ioaddr + RxFilterData);
+
+	writel(addr, ioaddr + RxFilterAddr);
+
+	return 0;
+}
+
+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u32 tmp;
+
+	ecmd->port        = dev->if_port;
+	ecmd->speed       = np->speed;
+	ecmd->duplex      = np->duplex;
+	ecmd->autoneg     = np->autoneg;
+	ecmd->advertising = 0;
+	if (np->advertising & ADVERTISE_10HALF)
+		ecmd->advertising |= ADVERTISED_10baseT_Half;
+	if (np->advertising & ADVERTISE_10FULL)
+		ecmd->advertising |= ADVERTISED_10baseT_Full;
+	if (np->advertising & ADVERTISE_100HALF)
+		ecmd->advertising |= ADVERTISED_100baseT_Half;
+	if (np->advertising & ADVERTISE_100FULL)
+		ecmd->advertising |= ADVERTISED_100baseT_Full;
+	ecmd->supported   = (SUPPORTED_Autoneg |
+		SUPPORTED_10baseT_Half  | SUPPORTED_10baseT_Full  |
+		SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+		SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE);
+	ecmd->phy_address = np->phy_addr_external;
+	/*
+	 * We intentionally report the phy address of the external
+	 * phy, even if the internal phy is used. This is necessary
+	 * to work around a deficiency of the ethtool interface:
+	 * It's only possible to query the settings of the active
+	 * port. Therefore 
+	 * # ethtool -s ethX port mii
+	 * actually sends an ioctl to switch to port mii with the
+	 * settings that are used for the current active port.
+	 * If we would report a different phy address in this
+	 * command, then
+	 * # ethtool -s ethX port tp;ethtool -s ethX port mii
+	 * would unintentionally change the phy address.
+	 *
+	 * Fortunately the phy address doesn't matter with the
+	 * internal phy...
+	 */
+
+	/* set information based on active port type */
+	switch (ecmd->port) {
+	default:
+	case PORT_TP:
+		ecmd->advertising |= ADVERTISED_TP;
+		ecmd->transceiver = XCVR_INTERNAL;
+		break;
+	case PORT_MII:
+		ecmd->advertising |= ADVERTISED_MII;
+		ecmd->transceiver = XCVR_EXTERNAL;
+		break;
+	case PORT_FIBRE:
+		ecmd->advertising |= ADVERTISED_FIBRE;
+		ecmd->transceiver = XCVR_EXTERNAL;
+		break;
+	}
+
+	/* if autonegotiation is on, try to return the active speed/duplex */
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		ecmd->advertising |= ADVERTISED_Autoneg;
+		tmp = mii_nway_result(
+			np->advertising & mdio_read(dev, MII_LPA));
+		if (tmp == LPA_100FULL || tmp == LPA_100HALF)
+			ecmd->speed  = SPEED_100;
+		else
+			ecmd->speed  = SPEED_10;
+		if (tmp == LPA_100FULL || tmp == LPA_10FULL)
+			ecmd->duplex = DUPLEX_FULL;
+		else
+			ecmd->duplex = DUPLEX_HALF;
+	}
+
+	/* ignore maxtxpkt, maxrxpkt for now */
+
+	return 0;
+}
+
+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (ecmd->port != PORT_TP && ecmd->port != PORT_MII && ecmd->port != PORT_FIBRE)
+		return -EINVAL;
+	if (ecmd->transceiver != XCVR_INTERNAL && ecmd->transceiver != XCVR_EXTERNAL)
+		return -EINVAL;
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+		if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
+					  ADVERTISED_10baseT_Full |
+					  ADVERTISED_100baseT_Half |
+					  ADVERTISED_100baseT_Full)) == 0) {
+			return -EINVAL;
+		}
+	} else if (ecmd->autoneg == AUTONEG_DISABLE) {
+		if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
+			return -EINVAL;
+		if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	/*
+	 * maxtxpkt, maxrxpkt: ignored for now.
+	 *
+	 * transceiver:
+	 * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always
+	 * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and
+	 * selects based on ecmd->port.
+	 *
+	 * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre
+	 * phys that are connected to the mii bus. It's used to apply fibre
+	 * specific updates.
+	 */
+
+	/* WHEW! now lets bang some bits */
+
+	/* save the parms */
+	dev->if_port          = ecmd->port;
+	np->autoneg           = ecmd->autoneg;
+	np->phy_addr_external = ecmd->phy_address & PhyAddrMask;
+	if (np->autoneg == AUTONEG_ENABLE) {
+		/* advertise only what has been requested */
+		np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+		if (ecmd->advertising & ADVERTISED_10baseT_Half)
+			np->advertising |= ADVERTISE_10HALF;
+		if (ecmd->advertising & ADVERTISED_10baseT_Full)
+			np->advertising |= ADVERTISE_10FULL;
+		if (ecmd->advertising & ADVERTISED_100baseT_Half)
+			np->advertising |= ADVERTISE_100HALF;
+		if (ecmd->advertising & ADVERTISED_100baseT_Full)
+			np->advertising |= ADVERTISE_100FULL;
+	} else {
+		np->speed  = ecmd->speed;
+		np->duplex = ecmd->duplex;
+		/* user overriding the initial full duplex parm? */
+		if (np->duplex == DUPLEX_HALF)
+			np->full_duplex = 0;
+	}
+
+	/* get the right phy enabled */
+	if (ecmd->port == PORT_TP)
+		switch_port_internal(dev);
+	else
+		switch_port_external(dev);
+
+	/* set parms and see how this affected our link status */
+	init_phy_fixup(dev);
+	check_link(dev);
+	return 0;
+}
+
+static int netdev_get_regs(struct net_device *dev, u8 *buf)
+{
+	int i;
+	int j;
+	u32 rfcr;
+	u32 *rbuf = (u32 *)buf;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* read non-mii page 0 of registers */
+	for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) {
+		rbuf[i] = readl(ioaddr + i*4);
+	}
+
+	/* read current mii registers */
+	for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++)
+		rbuf[i] = mdio_read(dev, i & 0x1f);
+
+	/* read only the 'magic' registers from page 1 */
+	writew(1, ioaddr + PGSEL);
+	rbuf[i++] = readw(ioaddr + PMDCSR);
+	rbuf[i++] = readw(ioaddr + TSTDAT);
+	rbuf[i++] = readw(ioaddr + DSPCFG);
+	rbuf[i++] = readw(ioaddr + SDCFG);
+	writew(0, ioaddr + PGSEL);
+
+	/* read RFCR indexed registers */
+	rfcr = readl(ioaddr + RxFilterAddr);
+	for (j = 0; j < NATSEMI_RFDR_NREGS; j++) {
+		writel(j*2, ioaddr + RxFilterAddr);
+		rbuf[i++] = readw(ioaddr + RxFilterData);
+	}
+	writel(rfcr, ioaddr + RxFilterAddr);
+
+	/* the interrupt status is clear-on-read - see if we missed any */
+	if (rbuf[4] & rbuf[5]) {
+		printk(KERN_WARNING
+			"%s: shoot, we dropped an interrupt (%#08x)\n",
+			dev->name, rbuf[4] & rbuf[5]);
+	}
+
+	return 0;
+}
+
+#define SWAP_BITS(x)	( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \
+			| (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9)  \
+			| (((x) & 0x0010) << 7)  | (((x) & 0x0020) << 5)  \
+			| (((x) & 0x0040) << 3)  | (((x) & 0x0080) << 1)  \
+			| (((x) & 0x0100) >> 1)  | (((x) & 0x0200) >> 3)  \
+			| (((x) & 0x0400) >> 5)  | (((x) & 0x0800) >> 7)  \
+			| (((x) & 0x1000) >> 9)  | (((x) & 0x2000) >> 11) \
+			| (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) )
+
+static int netdev_get_eeprom(struct net_device *dev, u8 *buf)
+{
+	int i;
+	u16 *ebuf = (u16 *)buf;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* eeprom_read reads 16 bits, and indexes by 16 bits */
+	for (i = 0; i < NATSEMI_EEPROM_SIZE/2; i++) {
+		ebuf[i] = eeprom_read(ioaddr, i);
+		/* The EEPROM itself stores data bit-swapped, but eeprom_read
+		 * reads it back "sanely". So we swap it back here in order to
+		 * present it to userland as it is stored. */
+		ebuf[i] = SWAP_BITS(ebuf[i]);
+	}
+	return 0;
+}
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct mii_ioctl_data *data = if_mii(rq);
+	struct netdev_private *np = netdev_priv(dev);
+
+	switch(cmd) {
+	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+	case SIOCDEVPRIVATE:		/* for binary compat, remove in 2.5 */
+		data->phy_id = np->phy_addr_external;
+		/* Fall Through */
+
+	case SIOCGMIIREG:		/* Read MII PHY register. */
+	case SIOCDEVPRIVATE+1:		/* for binary compat, remove in 2.5 */
+		/* The phy_id is not enough to uniquely identify
+		 * the intended target. Therefore the command is sent to
+		 * the given mii on the current port.
+		 */
+		if (dev->if_port == PORT_TP) {
+			if ((data->phy_id & 0x1f) == np->phy_addr_external)
+				data->val_out = mdio_read(dev,
+							data->reg_num & 0x1f);
+			else
+				data->val_out = 0;
+		} else {
+			move_int_phy(dev, data->phy_id & 0x1f);
+			data->val_out = miiport_read(dev, data->phy_id & 0x1f,
+							data->reg_num & 0x1f);
+		}
+		return 0;
+
+	case SIOCSMIIREG:		/* Write MII PHY register. */
+	case SIOCDEVPRIVATE+2:		/* for binary compat, remove in 2.5 */
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (dev->if_port == PORT_TP) {
+			if ((data->phy_id & 0x1f) == np->phy_addr_external) {
+ 				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
+					np->advertising = data->val_in;
+				mdio_write(dev, data->reg_num & 0x1f,
+							data->val_in);
+			}
+		} else {
+			if ((data->phy_id & 0x1f) == np->phy_addr_external) {
+ 				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
+					np->advertising = data->val_in;
+			}
+			move_int_phy(dev, data->phy_id & 0x1f);
+			miiport_write(dev, data->phy_id & 0x1f,
+						data->reg_num & 0x1f,
+						data->val_in);
+		}
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void enable_wol_mode(struct net_device *dev, int enable_intr)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (netif_msg_wol(np))
+		printk(KERN_INFO "%s: remaining active for wake-on-lan\n",
+			dev->name);
+
+	/* For WOL we must restart the rx process in silent mode.
+	 * Write NULL to the RxRingPtr. Only possible if
+	 * rx process is stopped
+	 */
+	writel(0, ioaddr + RxRingPtr);
+
+	/* read WoL status to clear */
+	readl(ioaddr + WOLCmd);
+
+	/* PME on, clear status */
+	writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun);
+
+	/* and restart the rx process */
+	writel(RxOn, ioaddr + ChipCmd);
+
+	if (enable_intr) {
+		/* enable the WOL interrupt.
+		 * Could be used to send a netlink message.
+		 */
+		writel(WOLPkt | LinkChange, ioaddr + IntrMask);
+		writel(1, ioaddr + IntrEnable);
+	}
+}
+
+static int netdev_close(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (netif_msg_ifdown(np))
+		printk(KERN_DEBUG
+			"%s: Shutting down ethercard, status was %#04x.\n",
+			dev->name, (int)readl(ioaddr + ChipCmd));
+	if (netif_msg_pktdata(np))
+		printk(KERN_DEBUG
+			"%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
+			dev->name, np->cur_tx, np->dirty_tx,
+			np->cur_rx, np->dirty_rx);
+
+	/*
+	 * FIXME: what if someone tries to close a device
+	 * that is suspended?
+	 * Should we reenable the nic to switch to
+	 * the final WOL settings?
+	 */
+
+	del_timer_sync(&np->timer);
+	disable_irq(dev->irq);
+	spin_lock_irq(&np->lock);
+	/* Disable interrupts, and flush posted writes */
+	writel(0, ioaddr + IntrEnable);
+	readl(ioaddr + IntrEnable);
+	np->hands_off = 1;
+	spin_unlock_irq(&np->lock);
+	enable_irq(dev->irq);
+
+	free_irq(dev->irq, dev);
+
+	/* Interrupt disabled, interrupt handler released,
+	 * queue stopped, timer deleted, rtnl_lock held
+	 * All async codepaths that access the driver are disabled.
+	 */
+	spin_lock_irq(&np->lock);
+	np->hands_off = 0;
+	readl(ioaddr + IntrMask);
+	readw(ioaddr + MIntrStatus);
+
+	/* Freeze Stats */
+	writel(StatsFreeze, ioaddr + StatsCtrl);
+
+	/* Stop the chip's Tx and Rx processes. */
+	natsemi_stop_rxtx(dev);
+
+	__get_stats(dev);
+	spin_unlock_irq(&np->lock);
+
+	/* clear the carrier last - an interrupt could reenable it otherwise */
+	netif_carrier_off(dev);
+	netif_stop_queue(dev);
+
+	dump_ring(dev);
+	drain_ring(dev);
+	free_ring(dev);
+
+	{
+		u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary;
+		if (wol) {
+			/* restart the NIC in WOL mode.
+			 * The nic must be stopped for this.
+			 */
+			enable_wol_mode(dev, 0);
+		} else {
+			/* Restore PME enable bit unmolested */
+			writel(np->SavedClkRun, ioaddr + ClkRun);
+		}
+	}
+	return 0;
+}
+
+
+static void __devexit natsemi_remove1 (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	unregister_netdev (dev);
+	pci_release_regions (pdev);
+	iounmap(ioaddr);
+	free_netdev (dev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * The ns83815 chip doesn't have explicit RxStop bits.
+ * Kicking the Rx or Tx process for a new packet reenables the Rx process
+ * of the nic, thus this function must be very careful:
+ *
+ * suspend/resume synchronization:
+ * entry points:
+ *   netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler,
+ *   start_tx, tx_timeout
+ *
+ * No function accesses the hardware without checking np->hands_off.
+ *	the check occurs under spin_lock_irq(&np->lock);
+ * exceptions:
+ *	* netdev_ioctl: noncritical access.
+ *	* netdev_open: cannot happen due to the device_detach
+ *	* netdev_close: doesn't hurt.
+ *	* netdev_timer: timer stopped by natsemi_suspend.
+ *	* intr_handler: doesn't acquire the spinlock. suspend calls
+ *		disable_irq() to enforce synchronization.
+ *
+ * Interrupts must be disabled, otherwise hands_off can cause irq storms.
+ */
+
+static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	rtnl_lock();
+	if (netif_running (dev)) {
+		del_timer_sync(&np->timer);
+
+		disable_irq(dev->irq);
+		spin_lock_irq(&np->lock);
+
+		writel(0, ioaddr + IntrEnable);
+		np->hands_off = 1;
+		natsemi_stop_rxtx(dev);
+		netif_stop_queue(dev);
+
+		spin_unlock_irq(&np->lock);
+		enable_irq(dev->irq);
+
+		/* Update the error counts. */
+		__get_stats(dev);
+
+		/* pci_power_off(pdev, -1); */
+		drain_ring(dev);
+		{
+			u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary;
+			/* Restore PME enable bit */
+			if (wol) {
+				/* restart the NIC in WOL mode.
+				 * The nic must be stopped for this.
+				 * FIXME: use the WOL interrupt
+				 */
+				enable_wol_mode(dev, 0);
+			} else {
+				/* Restore PME enable bit unmolested */
+				writel(np->SavedClkRun, ioaddr + ClkRun);
+			}
+		}
+	}
+	netif_device_detach(dev);
+	rtnl_unlock();
+	return 0;
+}
+
+
+static int natsemi_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+
+	rtnl_lock();
+	if (netif_device_present(dev))
+		goto out;
+	if (netif_running(dev)) {
+		BUG_ON(!np->hands_off);
+		pci_enable_device(pdev);
+	/*	pci_power_on(pdev); */
+
+		natsemi_reset(dev);
+		init_ring(dev);
+		disable_irq(dev->irq);
+		spin_lock_irq(&np->lock);
+		np->hands_off = 0;
+		init_registers(dev);
+		netif_device_attach(dev);
+		spin_unlock_irq(&np->lock);
+		enable_irq(dev->irq);
+
+		mod_timer(&np->timer, jiffies + 1*HZ);
+	}
+	netif_device_attach(dev);
+out:
+	rtnl_unlock();
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver natsemi_driver = {
+	.name		= DRV_NAME,
+	.id_table	= natsemi_pci_tbl,
+	.probe		= natsemi_probe1,
+	.remove		= __devexit_p(natsemi_remove1),
+#ifdef CONFIG_PM
+	.suspend	= natsemi_suspend,
+	.resume		= natsemi_resume,
+#endif
+};
+
+static int __init natsemi_init_mod (void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+	printk(version);
+#endif
+
+	return pci_module_init (&natsemi_driver);
+}
+
+static void __exit natsemi_exit_mod (void)
+{
+	pci_unregister_driver (&natsemi_driver);
+}
+
+module_init(natsemi_init_mod);
+module_exit(natsemi_exit_mod);
+