diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-05-20 07:50:27 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-12 00:21:33 -0700 |
commit | 8862bf1ed60de49550109b7023a0a33eb7db8b3c (patch) | |
tree | 76e2c24e847a986c139061f5d522aa94ce97e083 /drivers/net/meth.h | |
parent | a88394cfb58007cca945699545469017beb0d206 (diff) | |
download | op-kernel-dev-8862bf1ed60de49550109b7023a0a33eb7db8b3c.zip op-kernel-dev-8862bf1ed60de49550109b7023a0a33eb7db8b3c.tar.gz |
ioc3-eth/meth: Move the SGI drivers
Move the SGI drivers into drivers/net/ethernet/sgi/ and make the
necessary Kconfig and Makefile changes.
CC: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/meth.h')
-rw-r--r-- | drivers/net/meth.h | 243 |
1 files changed, 0 insertions, 243 deletions
diff --git a/drivers/net/meth.h b/drivers/net/meth.h deleted file mode 100644 index 5b145c6..0000000 --- a/drivers/net/meth.h +++ /dev/null @@ -1,243 +0,0 @@ - -/* - * snull.h -- definitions for the network module - * - * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet - * Copyright (C) 2001 O'Reilly & Associates - * - * The source code in this file can be freely used, adapted, - * and redistributed in source or binary form, so long as an - * acknowledgment appears in derived source files. The citation - * should list that the code comes from the book "Linux Device - * Drivers" by Alessandro Rubini and Jonathan Corbet, published - * by O'Reilly & Associates. No warranty is attached; - * we cannot take responsibility for errors or fitness for use. - */ - -/* version dependencies have been confined to a separate file */ - -/* Tunable parameters */ -#define TX_RING_ENTRIES 64 /* 64-512?*/ - -#define RX_RING_ENTRIES 16 /* Do not change */ -/* Internal constants */ -#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet)) -#define RX_BUFFER_SIZE 1546 /* ethenet packet size */ -#define METH_RX_BUFF_SIZE 4096 -#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */ -#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */ -#define RX_BUCKET_SIZE 256 - -/* For more detailed explanations of what each field menas, - see Nick's great comments to #defines below (or docs, if - you are lucky enough toget hold of them :)*/ - -/* tx status vector is written over tx command header upon - dma completion. */ - -typedef struct tx_status_vector { - u64 sent:1; /* always set to 1...*/ - u64 pad0:34;/* always set to 0 */ - u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/ - u64 col_retry_cnt:4; /*collision retry count*/ - u64 len:16; /*Transmit length in bytes*/ -} tx_status_vector; - -/* - * Each packet is 128 bytes long. - * It consists of header, 0-3 concatination - * buffer pointers and up to 120 data bytes. - */ -typedef struct tx_packet_hdr { - u64 pad1:36; /*should be filled with 0 */ - u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/ - cat_ptr2_valid:1, - cat_ptr1_valid:1; - u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/ - u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/ - u64 data_offset:7; /*Starting byte offset in ring data block*/ - u64 data_len:16; /*Length of valid data in bytes-1*/ -} tx_packet_hdr; -typedef union tx_cat_ptr { - struct { - u64 pad2:16; /* should be 0 */ - u64 len:16; /*length of buffer data - 1*/ - u64 start_addr:29; /*Physical starting address*/ - u64 pad1:3; /* should be zero */ - } form; - u64 raw; -} tx_cat_ptr; - -typedef struct tx_packet { - union { - tx_packet_hdr header; - tx_status_vector res; - u64 raw; - }header; - union { - tx_cat_ptr cat_buf[3]; - char dt[120]; - } data; -} tx_packet; - -typedef union rx_status_vector { - volatile struct { - u64 pad1:1;/*fill it with ones*/ - u64 pad2:15;/*fill with 0*/ - u64 ip_chk_sum:16; - u64 seq_num:5; - u64 mac_addr_match:1; - u64 mcast_addr_match:1; - u64 carrier_event_seen:1; - u64 bad_packet:1; - u64 long_event_seen:1; - u64 invalid_preamble:1; - u64 broadcast:1; - u64 multicast:1; - u64 crc_error:1; - u64 huh:1;/*???*/ - u64 rx_code_violation:1; - u64 rx_len:16; - } parsed; - volatile u64 raw; -} rx_status_vector; - -typedef struct rx_packet { - rx_status_vector status; - u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */ - u16 pad2; - char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */ -} rx_packet; - -#define TX_INFO_RPTR 0x00FF0000 -#define TX_INFO_WPTR 0x000000FF - - /* Bits in METH_MAC */ - -#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */ -#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */ -#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */ - /* selects ignored */ -#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */ -#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */ - /* Note: when loopback is set this bit becomes collision control. Setting this bit will */ - /* cause a collision to be reported. */ - - /* Bits 5 and 6 are used to determine the Destination address filter mode */ -#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ -#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ -#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ -#define METH_PROMISC 0x60 /* 11: Promiscious mode */ - -#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */ - -#define METH_MAC_IPG 0x1ffff00 - -#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8)) - /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/ - /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */ - /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */ - /* per increment for 10BaseT */ - - /* Bits 15 through 21 are used to determine IPGR1 */ - - /* Bits 22 through 28 are used to determine IPGR2 */ - -#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */ - /* 000: Initial revision */ - /* 001: First revision, Improved TX concatenation */ - - -/* DMA control bits */ -#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */ -#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */ - -#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */ -#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */ -#define METH_DMA_RX_EN BIT(15) /* Enable RX */ -#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */ - -/* RX FIFO MCL Info bits */ -#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf) -#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf) -#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f) - -/* RX status bits */ - -#define METH_RX_ST_VALID BIT(63) -#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16) -#define METH_RX_ST_DRBL_NBL BIT(17) -#define METH_RX_ST_CRC_ERR BIT(18) -#define METH_RX_ST_MCAST_PKT BIT(19) -#define METH_RX_ST_BCAST_PKT BIT(20) -#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21) -#define METH_RX_ST_LONG_EVT_SEEN BIT(22) -#define METH_RX_ST_BAD_PACKET BIT(23) -#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24) -#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25) -#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26) - -#define METH_RX_STATUS_ERRORS \ - ( \ - METH_RX_ST_RCV_CODE_VIOLATION| \ - METH_RX_ST_CRC_ERR| \ - METH_RX_ST_INV_PREAMBLE_CTX| \ - METH_RX_ST_LONG_EVT_SEEN| \ - METH_RX_ST_BAD_PACKET| \ - METH_RX_ST_CARRIER_EVT_SEEN \ - ) - /* Bits in METH_INT */ - /* Write _1_ to corresponding bit to clear */ -#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */ -#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */ - /* 1: A TX message had the INT request bit set, the packet has been sent. */ -#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */ -#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */ - /* 1: A memory error occurred during DMA, DMA stopped, Fatal */ -#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */ -#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */ -#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */ -#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */ - -/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */ -#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/ - - /* Bits 13 through 15 are always 0. */ - -#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */ - -#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */ - - /* top of the queue */ - -#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \ - METH_INT_MEM_ERROR| \ - METH_INT_TX_ABORT| \ - METH_INT_RX_OVERFLOW| \ - METH_INT_RX_UNDERFLOW) - -#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */ - -/* TX status bits */ -#define METH_TX_ST_DONE BIT(63) /* TX complete */ -#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */ -#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */ -#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */ -#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */ -#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */ -#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */ - - -/* Tx command header bits */ -#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */ - -/* Phy MDIO interface busy flag */ -#define MDIO_BUSY BIT(16) -#define MDIO_DATA_MASK 0xFFFF -/* PHY defines */ -#define PHY_QS6612X 0x0181441 /* Quality TX */ -#define PHY_ICS1889 0x0015F41 /* ICS FX */ -#define PHY_ICS1890 0x0015F42 /* ICS TX */ -#define PHY_DP83840 0x20005C0 /* National TX */ - -#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1) |