summaryrefslogtreecommitdiffstats
path: root/drivers/net/lne390.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/lne390.c
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/lne390.c')
-rw-r--r--drivers/net/lne390.c458
1 files changed, 458 insertions, 0 deletions
diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c
new file mode 100644
index 0000000..179a97c
--- /dev/null
+++ b/drivers/net/lne390.c
@@ -0,0 +1,458 @@
+/*
+ lne390.c
+
+ Linux driver for Mylex LNE390 EISA Network Adapter
+
+ Copyright (C) 1996-1998, Paul Gortmaker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ Information and Code Sources:
+
+ 1) Based upon framework of es3210 driver.
+ 2) The existing myriad of other Linux 8390 drivers by Donald Becker.
+ 3) Russ Nelson's asm packet driver provided additional info.
+ 4) Info for getting IRQ and sh-mem gleaned from the EISA cfg files.
+
+ The LNE390 is an EISA shared memory NS8390 implementation. Note
+ that all memory copies to/from the board must be 32bit transfers.
+ There are two versions of the card: the lne390a and the lne390b.
+ Going by the EISA cfg files, the "a" has jumpers to select between
+ BNC/AUI, but the "b" also has RJ-45 and selection is via the SCU.
+ The shared memory address selection is also slightly different.
+ Note that shared memory address > 1MB are supported with this driver.
+
+ You can try <http://www.mylex.com> if you want more info, as I've
+ never even seen one of these cards. :)
+
+ Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/01
+ - get rid of check_region
+ - no need to check if dev == NULL in lne390_probe1
+*/
+
+static const char *version =
+ "lne390.c: Driver revision v0.99.1, 01/09/2000\n";
+
+#include <linux/module.h>
+#include <linux/eisa.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "8390.h"
+
+#define DRV_NAME "lne390"
+
+static int lne390_probe1(struct net_device *dev, int ioaddr);
+
+static int lne390_open(struct net_device *dev);
+static int lne390_close(struct net_device *dev);
+
+static void lne390_reset_8390(struct net_device *dev);
+
+static void lne390_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page);
+static void lne390_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset);
+static void lne390_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page);
+
+#define LNE390_START_PG 0x00 /* First page of TX buffer */
+#define LNE390_STOP_PG 0x80 /* Last page +1 of RX ring */
+
+#define LNE390_ID_PORT 0xc80 /* Same for all EISA cards */
+#define LNE390_IO_EXTENT 0x20
+#define LNE390_SA_PROM 0x16 /* Start of e'net addr. */
+#define LNE390_RESET_PORT 0xc84 /* From the pkt driver source */
+#define LNE390_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */
+
+#define LNE390_ADDR0 0x00 /* 3 byte vendor prefix */
+#define LNE390_ADDR1 0x80
+#define LNE390_ADDR2 0xe5
+
+#define LNE390_ID0 0x10009835 /* 0x3598 = 01101 01100 11000 = mlx */
+#define LNE390_ID1 0x11009835 /* above is the 390A, this is 390B */
+
+#define LNE390_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */
+#define LNE390_CFG2 0xc90
+
+/*
+ * You can OR any of the following bits together and assign it
+ * to LNE390_DEBUG to get verbose driver info during operation.
+ * Currently only the probe one is implemented.
+ */
+
+#define LNE390_D_PROBE 0x01
+#define LNE390_D_RX_PKT 0x02
+#define LNE390_D_TX_PKT 0x04
+#define LNE390_D_IRQ 0x08
+
+#define LNE390_DEBUG 0
+
+static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
+static unsigned int shmem_mapA[] __initdata = {0xff, 0xfe, 0xfd, 0xfff, 0xffe, 0xffc, 0x0d, 0x0};
+static unsigned int shmem_mapB[] __initdata = {0xff, 0xfe, 0x0e, 0xfff, 0xffe, 0xffc, 0x0d, 0x0};
+
+/*
+ * Probe for the card. The best way is to read the EISA ID if it
+ * is known. Then we can check the prefix of the station address
+ * PROM for a match against the value assigned to Mylex.
+ */
+
+static int __init do_lne390_probe(struct net_device *dev)
+{
+ unsigned short ioaddr = dev->base_addr;
+ int irq = dev->irq;
+ int mem_start = dev->mem_start;
+ int ret;
+
+ SET_MODULE_OWNER(dev);
+
+ if (ioaddr > 0x1ff) { /* Check a single specified location. */
+ if (!request_region(ioaddr, LNE390_IO_EXTENT, DRV_NAME))
+ return -EBUSY;
+ ret = lne390_probe1(dev, ioaddr);
+ if (ret)
+ release_region(ioaddr, LNE390_IO_EXTENT);
+ return ret;
+ }
+ else if (ioaddr > 0) /* Don't probe at all. */
+ return -ENXIO;
+
+ if (!EISA_bus) {
+#if LNE390_DEBUG & LNE390_D_PROBE
+ printk("lne390-debug: Not an EISA bus. Not probing high ports.\n");
+#endif
+ return -ENXIO;
+ }
+
+ /* EISA spec allows for up to 16 slots, but 8 is typical. */
+ for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
+ if (!request_region(ioaddr, LNE390_IO_EXTENT, DRV_NAME))
+ continue;
+ if (lne390_probe1(dev, ioaddr) == 0)
+ return 0;
+ release_region(ioaddr, LNE390_IO_EXTENT);
+ dev->irq = irq;
+ dev->mem_start = mem_start;
+ }
+
+ return -ENODEV;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, LNE390_IO_EXTENT);
+ iounmap(ei_status.mem);
+}
+
+#ifndef MODULE
+struct net_device * __init lne390_probe(int unit)
+{
+ struct net_device *dev = alloc_ei_netdev();
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_lne390_probe(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ cleanup_card(dev);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+static int __init lne390_probe1(struct net_device *dev, int ioaddr)
+{
+ int i, revision, ret;
+ unsigned long eisa_id;
+
+ if (inb_p(ioaddr + LNE390_ID_PORT) == 0xff) return -ENODEV;
+
+#if LNE390_DEBUG & LNE390_D_PROBE
+ printk("lne390-debug: probe at %#x, ID %#8x\n", ioaddr, inl(ioaddr + LNE390_ID_PORT));
+ printk("lne390-debug: config regs: %#x %#x\n",
+ inb(ioaddr + LNE390_CFG1), inb(ioaddr + LNE390_CFG2));
+#endif
+
+
+/* Check the EISA ID of the card. */
+ eisa_id = inl(ioaddr + LNE390_ID_PORT);
+ if ((eisa_id != LNE390_ID0) && (eisa_id != LNE390_ID1)) {
+ return -ENODEV;
+ }
+
+ revision = (eisa_id >> 24) & 0x01; /* 0 = rev A, 1 rev B */
+
+#if 0
+/* Check the Mylex vendor ID as well. Not really required. */
+ if (inb(ioaddr + LNE390_SA_PROM + 0) != LNE390_ADDR0
+ || inb(ioaddr + LNE390_SA_PROM + 1) != LNE390_ADDR1
+ || inb(ioaddr + LNE390_SA_PROM + 2) != LNE390_ADDR2 ) {
+ printk("lne390.c: card not found");
+ for(i = 0; i < ETHER_ADDR_LEN; i++)
+ printk(" %02x", inb(ioaddr + LNE390_SA_PROM + i));
+ printk(" (invalid prefix).\n");
+ return -ENODEV;
+ }
+#endif
+
+ printk("lne390.c: LNE390%X in EISA slot %d, address", 0xa+revision, ioaddr/0x1000);
+ for(i = 0; i < ETHER_ADDR_LEN; i++)
+ printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + LNE390_SA_PROM + i)));
+ printk(".\nlne390.c: ");
+
+ /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
+ if (dev->irq == 0) {
+ unsigned char irq_reg = inb(ioaddr + LNE390_CFG2) >> 3;
+ dev->irq = irq_map[irq_reg & 0x07];
+ printk("using");
+ } else {
+ /* This is useless unless we reprogram the card here too */
+ if (dev->irq == 2) dev->irq = 9; /* Doh! */
+ printk("assigning");
+ }
+ printk(" IRQ %d,", dev->irq);
+
+ if ((ret = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev))) {
+ printk (" unable to get IRQ %d.\n", dev->irq);
+ return ret;
+ }
+
+ if (dev->mem_start == 0) {
+ unsigned char mem_reg = inb(ioaddr + LNE390_CFG2) & 0x07;
+
+ if (revision) /* LNE390B */
+ dev->mem_start = shmem_mapB[mem_reg] * 0x10000;
+ else /* LNE390A */
+ dev->mem_start = shmem_mapA[mem_reg] * 0x10000;
+ printk(" using ");
+ } else {
+ /* Should check for value in shmem_map and reprogram the card to use it */
+ dev->mem_start &= 0xfff0000;
+ printk(" assigning ");
+ }
+
+ printk("%dkB memory at physical address %#lx\n",
+ LNE390_STOP_PG/4, dev->mem_start);
+
+ /*
+ BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
+ the card mem within the region covered by `normal' RAM !!!
+
+ ioremap() will fail in that case.
+ */
+ ei_status.mem = ioremap(dev->mem_start, LNE390_STOP_PG*0x100);
+ if (!ei_status.mem) {
+ printk(KERN_ERR "lne390.c: Unable to remap card memory above 1MB !!\n");
+ printk(KERN_ERR "lne390.c: Try using EISA SCU to set memory below 1MB.\n");
+ printk(KERN_ERR "lne390.c: Driver NOT installed.\n");
+ ret = -EAGAIN;
+ goto cleanup;
+ }
+ printk("lne390.c: remapped %dkB card memory to virtual address %p\n",
+ LNE390_STOP_PG/4, ei_status.mem);
+
+ dev->mem_start = (unsigned long)ei_status.mem;
+ dev->mem_end = dev->mem_start + (LNE390_STOP_PG - LNE390_START_PG)*256;
+
+ /* The 8390 offset is zero for the LNE390 */
+ dev->base_addr = ioaddr;
+
+ ei_status.name = "LNE390";
+ ei_status.tx_start_page = LNE390_START_PG;
+ ei_status.rx_start_page = LNE390_START_PG + TX_PAGES;
+ ei_status.stop_page = LNE390_STOP_PG;
+ ei_status.word16 = 1;
+
+ if (ei_debug > 0)
+ printk(version);
+
+ ei_status.reset_8390 = &lne390_reset_8390;
+ ei_status.block_input = &lne390_block_input;
+ ei_status.block_output = &lne390_block_output;
+ ei_status.get_8390_hdr = &lne390_get_8390_hdr;
+
+ dev->open = &lne390_open;
+ dev->stop = &lne390_close;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ei_poll;
+#endif
+ NS8390_init(dev, 0);
+ return 0;
+cleanup:
+ free_irq(dev->irq, dev);
+ return ret;
+}
+
+/*
+ * Reset as per the packet driver method. Judging by the EISA cfg
+ * file, this just toggles the "Board Enable" bits (bit 2 and 0).
+ */
+
+static void lne390_reset_8390(struct net_device *dev)
+{
+ unsigned short ioaddr = dev->base_addr;
+
+ outb(0x04, ioaddr + LNE390_RESET_PORT);
+ if (ei_debug > 1) printk("%s: resetting the LNE390...", dev->name);
+
+ mdelay(2);
+
+ ei_status.txing = 0;
+ outb(0x01, ioaddr + LNE390_RESET_PORT);
+ if (ei_debug > 1) printk("reset done\n");
+
+ return;
+}
+
+/*
+ * Note: In the following three functions is the implicit assumption
+ * that the associated memcpy will only use "rep; movsl" as long as
+ * we keep the counts as some multiple of doublewords. This is a
+ * requirement of the hardware, and also prevents us from using
+ * eth_io_copy_and_sum() since we can't guarantee it will limit
+ * itself to doubleword access.
+ */
+
+/*
+ * Grab the 8390 specific header. Similar to the block_input routine, but
+ * we don't need to be concerned with ring wrap as the header will be at
+ * the start of a page, so we optimize accordingly. (A single doubleword.)
+ */
+
+static void
+lne390_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ void __iomem *hdr_start = ei_status.mem + ((ring_page - LNE390_START_PG)<<8);
+ memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
+ hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */
+}
+
+/*
+ * Block input and output are easy on shared memory ethercards, the only
+ * complication is when the ring buffer wraps. The count will already
+ * be rounded up to a doubleword value via lne390_get_8390_hdr() above.
+ */
+
+static void lne390_block_input(struct net_device *dev, int count, struct sk_buff *skb,
+ int ring_offset)
+{
+ void __iomem *xfer_start = ei_status.mem + ring_offset - (LNE390_START_PG<<8);
+
+ if (ring_offset + count > (LNE390_STOP_PG<<8)) {
+ /* Packet wraps over end of ring buffer. */
+ int semi_count = (LNE390_STOP_PG<<8) - ring_offset;
+ memcpy_fromio(skb->data, xfer_start, semi_count);
+ count -= semi_count;
+ memcpy_fromio(skb->data + semi_count,
+ ei_status.mem + (TX_PAGES<<8), count);
+ } else {
+ /* Packet is in one chunk. */
+ memcpy_fromio(skb->data, xfer_start, count);
+ }
+}
+
+static void lne390_block_output(struct net_device *dev, int count,
+ const unsigned char *buf, int start_page)
+{
+ void __iomem *shmem = ei_status.mem + ((start_page - LNE390_START_PG)<<8);
+
+ count = (count + 3) & ~3; /* Round up to doubleword */
+ memcpy_toio(shmem, buf, count);
+}
+
+static int lne390_open(struct net_device *dev)
+{
+ ei_open(dev);
+ return 0;
+}
+
+static int lne390_close(struct net_device *dev)
+{
+
+ if (ei_debug > 1)
+ printk("%s: Shutting down ethercard.\n", dev->name);
+
+ ei_close(dev);
+ return 0;
+}
+
+#ifdef MODULE
+#define MAX_LNE_CARDS 4 /* Max number of LNE390 cards per module */
+static struct net_device *dev_lne[MAX_LNE_CARDS];
+static int io[MAX_LNE_CARDS];
+static int irq[MAX_LNE_CARDS];
+static int mem[MAX_LNE_CARDS];
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(mem, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O base address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s)");
+MODULE_PARM_DESC(mem, "memory base address(es)");
+MODULE_DESCRIPTION("Mylex LNE390A/B EISA Ethernet driver");
+MODULE_LICENSE("GPL");
+
+int init_module(void)
+{
+ struct net_device *dev;
+ int this_dev, found = 0;
+
+ for (this_dev = 0; this_dev < MAX_LNE_CARDS; this_dev++) {
+ if (io[this_dev] == 0 && this_dev != 0)
+ break;
+ dev = alloc_ei_netdev();
+ if (!dev)
+ break;
+ dev->irq = irq[this_dev];
+ dev->base_addr = io[this_dev];
+ dev->mem_start = mem[this_dev];
+ if (do_lne390_probe(dev) == 0) {
+ if (register_netdev(dev) == 0) {
+ dev_lne[found++] = dev;
+ continue;
+ }
+ cleanup_card(dev);
+ }
+ free_netdev(dev);
+ printk(KERN_WARNING "lne390.c: No LNE390 card found (i/o = 0x%x).\n", io[this_dev]);
+ break;
+ }
+ if (found)
+ return 0;
+ return -ENXIO;
+}
+
+void cleanup_module(void)
+{
+ int this_dev;
+
+ for (this_dev = 0; this_dev < MAX_LNE_CARDS; this_dev++) {
+ struct net_device *dev = dev_lne[this_dev];
+ if (dev) {
+ unregister_netdev(dev);
+ cleanup_card(dev);
+ free_netdev(dev);
+ }
+ }
+}
+#endif /* MODULE */
+
OpenPOWER on IntegriCloud