i825xx: Move the Intel 82586/82593/82596 based drivers

Move the drivers that use the i82586/i82593/i82596 chipsets into
drivers/net/ethernet/i825xx/ and make the necessary Kconfig and
Makefile changes.  There were 4 3Com drivers which were initially
moved into 3com/, which now reside in i825xx since they all used
the i82586 chip.

CC: Philip Blundell <philb@gnu.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: <aris@cathedrallabs.org>
CC: Donald Becker <becker@scyld.com>
CC: Chris Beauregard <cpbeaure@undergrad.math.uwaterloo.ca>
CC: Richard Procter <rnp@paradise.net.nz>
CC: Andries Brouwer <aeb@cwi.nl>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Richard Hirst <richard@sleepie.demon.co.uk>
CC: Sam Creasey <sammy@oh.verio.com>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 1412 deletions

diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
deleted file mode 100644
index 9e04289..0000000
--- a/drivers/net/lib82596.c
+++ /dev/null
@@ -1,1412 +0,0 @@
-/* lasi_82596.c -- driver for the intel 82596 ethernet controller, as
-   munged into HPPA boxen .
-
-   This driver is based upon 82596.c, original credits are below...
-   but there were too many hoops which HP wants jumped through to
-   keep this code in there in a sane manner.
-
-   3 primary sources of the mess --
-   1) hppa needs *lots* of cacheline flushing to keep this kind of
-   MMIO running.
-
-   2) The 82596 needs to see all of its pointers as their physical
-   address.  Thus virt_to_bus/bus_to_virt are *everywhere*.
-
-   3) The implementation HP is using seems to be significantly pickier
-   about when and how the command and RX units are started.  some
-   command ordering was changed.
-
-   Examination of the mach driver leads one to believe that there
-   might be a saner way to pull this off...  anyone who feels like a
-   full rewrite can be my guest.
-
-   Split 02/13/2000 Sam Creasey (sammy@oh.verio.com)
-
-   02/01/2000  Initial modifications for parisc by Helge Deller (deller@gmx.de)
-   03/02/2000  changes for better/correct(?) cache-flushing (deller)
-*/
-
-/* 82596.c: A generic 82596 ethernet driver for linux. */
-/*
-   Based on Apricot.c
-   Written 1994 by Mark Evans.
-   This driver is for the Apricot 82596 bus-master interface
-
-   Modularised 12/94 Mark Evans
-
-
-   Modified to support the 82596 ethernet chips on 680x0 VME boards.
-   by Richard Hirst <richard@sleepie.demon.co.uk>
-   Renamed to be 82596.c
-
-   980825:  Changed to receive directly in to sk_buffs which are
-   allocated at open() time.  Eliminates copy on incoming frames
-   (small ones are still copied).  Shared data now held in a
-   non-cached page, so we can run on 68060 in copyback mode.
-
-   TBD:
-   * look at deferring rx frames rather than discarding (as per tulip)
-   * handle tx ring full as per tulip
-   * performance test to tune rx_copybreak
-
-   Most of my modifications relate to the braindead big-endian
-   implementation by Intel.  When the i596 is operating in
-   'big-endian' mode, it thinks a 32 bit value of 0x12345678
-   should be stored as 0x56781234.  This is a real pain, when
-   you have linked lists which are shared by the 680x0 and the
-   i596.
-
-   Driver skeleton
-   Written 1993 by Donald Becker.
-   Copyright 1993 United States Government as represented by the Director,
-   National Security Agency. This software may only be used and distributed
-   according to the terms of the GNU General Public License as modified by SRC,
-   incorporated herein by reference.
-
-   The author may be reached as becker@scyld.com, or C/O
-   Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
-
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gfp.h>
-
-/* DEBUG flags
- */
-
-#define DEB_INIT	0x0001
-#define DEB_PROBE	0x0002
-#define DEB_SERIOUS	0x0004
-#define DEB_ERRORS	0x0008
-#define DEB_MULTI	0x0010
-#define DEB_TDR		0x0020
-#define DEB_OPEN	0x0040
-#define DEB_RESET	0x0080
-#define DEB_ADDCMD	0x0100
-#define DEB_STATUS	0x0200
-#define DEB_STARTTX	0x0400
-#define DEB_RXADDR	0x0800
-#define DEB_TXADDR	0x1000
-#define DEB_RXFRAME	0x2000
-#define DEB_INTS	0x4000
-#define DEB_STRUCT	0x8000
-#define DEB_ANY		0xffff
-
-
-#define DEB(x, y)	if (i596_debug & (x)) { y; }
-
-
-/*
- * The MPU_PORT command allows direct access to the 82596. With PORT access
- * the following commands are available (p5-18). The 32-bit port command
- * must be word-swapped with the most significant word written first.
- * This only applies to VME boards.
- */
-#define PORT_RESET		0x00	/* reset 82596 */
-#define PORT_SELFTEST		0x01	/* selftest */
-#define PORT_ALTSCP		0x02	/* alternate SCB address */
-#define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
-
-static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
-
-/* Copy frames shorter than rx_copybreak, otherwise pass on up in
- * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
- */
-static int rx_copybreak = 100;
-
-#define PKT_BUF_SZ	1536
-#define MAX_MC_CNT	64
-
-#define ISCP_BUSY	0x0001
-
-#define I596_NULL ((u32)0xffffffff)
-
-#define CMD_EOL		0x8000	/* The last command of the list, stop. */
-#define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
-#define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
-
-#define CMD_FLEX	0x0008	/* Enable flexible memory model */
-
-enum commands {
-	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
-	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
-};
-
-#define STAT_C		0x8000	/* Set to 0 after execution */
-#define STAT_B		0x4000	/* Command being executed */
-#define STAT_OK		0x2000	/* Command executed ok */
-#define STAT_A		0x1000	/* Command aborted */
-
-#define	 CUC_START	0x0100
-#define	 CUC_RESUME	0x0200
-#define	 CUC_SUSPEND    0x0300
-#define	 CUC_ABORT	0x0400
-#define	 RX_START	0x0010
-#define	 RX_RESUME	0x0020
-#define	 RX_SUSPEND	0x0030
-#define	 RX_ABORT	0x0040
-
-#define TX_TIMEOUT	(HZ/20)
-
-
-struct i596_reg {
-	unsigned short porthi;
-	unsigned short portlo;
-	u32            ca;
-};
-
-#define EOF		0x8000
-#define SIZE_MASK	0x3fff
-
-struct i596_tbd {
-	unsigned short size;
-	unsigned short pad;
-	u32            next;
-	u32            data;
-	u32 cache_pad[5];		/* Total 32 bytes... */
-};
-
-/* The command structure has two 'next' pointers; v_next is the address of
- * the next command as seen by the CPU, b_next is the address of the next
- * command as seen by the 82596.  The b_next pointer, as used by the 82596
- * always references the status field of the next command, rather than the
- * v_next field, because the 82596 is unaware of v_next.  It may seem more
- * logical to put v_next at the end of the structure, but we cannot do that
- * because the 82596 expects other fields to be there, depending on command
- * type.
- */
-
-struct i596_cmd {
-	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
-	unsigned short status;
-	unsigned short command;
-	u32            b_next;	/* Address from i596 viewpoint */
-};
-
-struct tx_cmd {
-	struct i596_cmd cmd;
-	u32            tbd;
-	unsigned short size;
-	unsigned short pad;
-	struct sk_buff *skb;		/* So we can free it after tx */
-	dma_addr_t dma_addr;
-#ifdef __LP64__
-	u32 cache_pad[6];		/* Total 64 bytes... */
-#else
-	u32 cache_pad[1];		/* Total 32 bytes... */
-#endif
-};
-
-struct tdr_cmd {
-	struct i596_cmd cmd;
-	unsigned short status;
-	unsigned short pad;
-};
-
-struct mc_cmd {
-	struct i596_cmd cmd;
-	short mc_cnt;
-	char mc_addrs[MAX_MC_CNT*6];
-};
-
-struct sa_cmd {
-	struct i596_cmd cmd;
-	char eth_addr[8];
-};
-
-struct cf_cmd {
-	struct i596_cmd cmd;
-	char i596_config[16];
-};
-
-struct i596_rfd {
-	unsigned short stat;
-	unsigned short cmd;
-	u32            b_next;	/* Address from i596 viewpoint */
-	u32            rbd;
-	unsigned short count;
-	unsigned short size;
-	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
-	struct i596_rfd *v_prev;
-#ifndef __LP64__
-	u32 cache_pad[2];		/* Total 32 bytes... */
-#endif
-};
-
-struct i596_rbd {
-	/* hardware data */
-	unsigned short count;
-	unsigned short zero1;
-	u32            b_next;
-	u32            b_data;		/* Address from i596 viewpoint */
-	unsigned short size;
-	unsigned short zero2;
-	/* driver data */
-	struct sk_buff *skb;
-	struct i596_rbd *v_next;
-	u32            b_addr;		/* This rbd addr from i596 view */
-	unsigned char *v_data;		/* Address from CPUs viewpoint */
-					/* Total 32 bytes... */
-#ifdef __LP64__
-    u32 cache_pad[4];
-#endif
-};
-
-/* These values as chosen so struct i596_dma fits in one page... */
-
-#define TX_RING_SIZE 32
-#define RX_RING_SIZE 16
-
-struct i596_scb {
-	unsigned short status;
-	unsigned short command;
-	u32           cmd;
-	u32           rfd;
-	u32           crc_err;
-	u32           align_err;
-	u32           resource_err;
-	u32           over_err;
-	u32           rcvdt_err;
-	u32           short_err;
-	unsigned short t_on;
-	unsigned short t_off;
-};
-
-struct i596_iscp {
-	u32 stat;
-	u32 scb;
-};
-
-struct i596_scp {
-	u32 sysbus;
-	u32 pad;
-	u32 iscp;
-};
-
-struct i596_dma {
-	struct i596_scp scp		        __attribute__((aligned(32)));
-	volatile struct i596_iscp iscp		__attribute__((aligned(32)));
-	volatile struct i596_scb scb		__attribute__((aligned(32)));
-	struct sa_cmd sa_cmd			__attribute__((aligned(32)));
-	struct cf_cmd cf_cmd			__attribute__((aligned(32)));
-	struct tdr_cmd tdr_cmd			__attribute__((aligned(32)));
-	struct mc_cmd mc_cmd			__attribute__((aligned(32)));
-	struct i596_rfd rfds[RX_RING_SIZE]	__attribute__((aligned(32)));
-	struct i596_rbd rbds[RX_RING_SIZE]	__attribute__((aligned(32)));
-	struct tx_cmd tx_cmds[TX_RING_SIZE]	__attribute__((aligned(32)));
-	struct i596_tbd tbds[TX_RING_SIZE]	__attribute__((aligned(32)));
-};
-
-struct i596_private {
-	struct i596_dma *dma;
-	u32    stat;
-	int last_restart;
-	struct i596_rfd *rfd_head;
-	struct i596_rbd *rbd_head;
-	struct i596_cmd *cmd_tail;
-	struct i596_cmd *cmd_head;
-	int cmd_backlog;
-	u32    last_cmd;
-	int next_tx_cmd;
-	int options;
-	spinlock_t lock;       /* serialize access to chip */
-	dma_addr_t dma_addr;
-	void __iomem *mpu_port;
-	void __iomem *ca;
-};
-
-static const char init_setup[] =
-{
-	0x8E,		/* length, prefetch on */
-	0xC8,		/* fifo to 8, monitor off */
-	0x80,		/* don't save bad frames */
-	0x2E,		/* No source address insertion, 8 byte preamble */
-	0x00,		/* priority and backoff defaults */
-	0x60,		/* interframe spacing */
-	0x00,		/* slot time LSB */
-	0xf2,		/* slot time and retries */
-	0x00,		/* promiscuous mode */
-	0x00,		/* collision detect */
-	0x40,		/* minimum frame length */
-	0xff,
-	0x00,
-	0x7f /*  *multi IA */ };
-
-static int i596_open(struct net_device *dev);
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t i596_interrupt(int irq, void *dev_id);
-static int i596_close(struct net_device *dev);
-static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
-static void i596_tx_timeout (struct net_device *dev);
-static void print_eth(unsigned char *buf, char *str);
-static void set_multicast_list(struct net_device *dev);
-static inline void ca(struct net_device *dev);
-static void mpu_port(struct net_device *dev, int c, dma_addr_t x);
-
-static int rx_ring_size = RX_RING_SIZE;
-static int ticks_limit = 100;
-static int max_cmd_backlog = TX_RING_SIZE-1;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void i596_poll_controller(struct net_device *dev);
-#endif
-
-
-static inline int wait_istat(struct net_device *dev, struct i596_dma *dma, int delcnt, char *str)
-{
-	DMA_INV(dev, &(dma->iscp), sizeof(struct i596_iscp));
-	while (--delcnt && dma->iscp.stat) {
-		udelay(10);
-		DMA_INV(dev, &(dma->iscp), sizeof(struct i596_iscp));
-	}
-	if (!delcnt) {
-		printk(KERN_ERR "%s: %s, iscp.stat %04x, didn't clear\n",
-		     dev->name, str, SWAP16(dma->iscp.stat));
-		return -1;
-	} else
-		return 0;
-}
-
-
-static inline int wait_cmd(struct net_device *dev, struct i596_dma *dma, int delcnt, char *str)
-{
-	DMA_INV(dev, &(dma->scb), sizeof(struct i596_scb));
-	while (--delcnt && dma->scb.command) {
-		udelay(10);
-		DMA_INV(dev, &(dma->scb), sizeof(struct i596_scb));
-	}
-	if (!delcnt) {
-		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
-		       dev->name, str,
-		       SWAP16(dma->scb.status),
-		       SWAP16(dma->scb.command));
-		return -1;
-	} else
-		return 0;
-}
-
-
-static void i596_display_data(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma = lp->dma;
-	struct i596_cmd *cmd;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-
-	printk(KERN_DEBUG "lp and scp at %p, .sysbus = %08x, .iscp = %08x\n",
-	       &dma->scp, dma->scp.sysbus, SWAP32(dma->scp.iscp));
-	printk(KERN_DEBUG "iscp at %p, iscp.stat = %08x, .scb = %08x\n",
-	       &dma->iscp, SWAP32(dma->iscp.stat), SWAP32(dma->iscp.scb));
-	printk(KERN_DEBUG "scb at %p, scb.status = %04x, .command = %04x,"
-		" .cmd = %08x, .rfd = %08x\n",
-	       &dma->scb, SWAP16(dma->scb.status), SWAP16(dma->scb.command),
-		SWAP16(dma->scb.cmd), SWAP32(dma->scb.rfd));
-	printk(KERN_DEBUG "   errors: crc %x, align %x, resource %x,"
-	       " over %x, rcvdt %x, short %x\n",
-	       SWAP32(dma->scb.crc_err), SWAP32(dma->scb.align_err),
-	       SWAP32(dma->scb.resource_err), SWAP32(dma->scb.over_err),
-	       SWAP32(dma->scb.rcvdt_err), SWAP32(dma->scb.short_err));
-	cmd = lp->cmd_head;
-	while (cmd != NULL) {
-		printk(KERN_DEBUG
-		       "cmd at %p, .status = %04x, .command = %04x,"
-		       " .b_next = %08x\n",
-		       cmd, SWAP16(cmd->status), SWAP16(cmd->command),
-		       SWAP32(cmd->b_next));
-		cmd = cmd->v_next;
-	}
-	rfd = lp->rfd_head;
-	printk(KERN_DEBUG "rfd_head = %p\n", rfd);
-	do {
-		printk(KERN_DEBUG
-		       "   %p .stat %04x, .cmd %04x, b_next %08x, rbd %08x,"
-		       " count %04x\n",
-		       rfd, SWAP16(rfd->stat), SWAP16(rfd->cmd),
-		       SWAP32(rfd->b_next), SWAP32(rfd->rbd),
-		       SWAP16(rfd->count));
-		rfd = rfd->v_next;
-	} while (rfd != lp->rfd_head);
-	rbd = lp->rbd_head;
-	printk(KERN_DEBUG "rbd_head = %p\n", rbd);
-	do {
-		printk(KERN_DEBUG
-		       "   %p .count %04x, b_next %08x, b_data %08x,"
-		       " size %04x\n",
-			rbd, SWAP16(rbd->count), SWAP32(rbd->b_next),
-		       SWAP32(rbd->b_data), SWAP16(rbd->size));
-		rbd = rbd->v_next;
-	} while (rbd != lp->rbd_head);
-	DMA_INV(dev, dma, sizeof(struct i596_dma));
-}
-
-
-#define virt_to_dma(lp, v) ((lp)->dma_addr + (dma_addr_t)((unsigned long)(v)-(unsigned long)((lp)->dma)))
-
-static inline int init_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma = lp->dma;
-	int i;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-
-	/* First build the Receive Buffer Descriptor List */
-
-	for (i = 0, rbd = dma->rbds; i < rx_ring_size; i++, rbd++) {
-		dma_addr_t dma_addr;
-		struct sk_buff *skb;
-
-		skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
-		if (skb == NULL)
-			return -1;
-		dma_addr = dma_map_single(dev->dev.parent, skb->data,
-					  PKT_BUF_SZ, DMA_FROM_DEVICE);
-		rbd->v_next = rbd+1;
-		rbd->b_next = SWAP32(virt_to_dma(lp, rbd+1));
-		rbd->b_addr = SWAP32(virt_to_dma(lp, rbd));
-		rbd->skb = skb;
-		rbd->v_data = skb->data;
-		rbd->b_data = SWAP32(dma_addr);
-		rbd->size = SWAP16(PKT_BUF_SZ);
-	}
-	lp->rbd_head = dma->rbds;
-	rbd = dma->rbds + rx_ring_size - 1;
-	rbd->v_next = dma->rbds;
-	rbd->b_next = SWAP32(virt_to_dma(lp, dma->rbds));
-
-	/* Now build the Receive Frame Descriptor List */
-
-	for (i = 0, rfd = dma->rfds; i < rx_ring_size; i++, rfd++) {
-		rfd->rbd = I596_NULL;
-		rfd->v_next = rfd+1;
-		rfd->v_prev = rfd-1;
-		rfd->b_next = SWAP32(virt_to_dma(lp, rfd+1));
-		rfd->cmd = SWAP16(CMD_FLEX);
-	}
-	lp->rfd_head = dma->rfds;
-	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
-	rfd = dma->rfds;
-	rfd->rbd = SWAP32(virt_to_dma(lp, lp->rbd_head));
-	rfd->v_prev = dma->rfds + rx_ring_size - 1;
-	rfd = dma->rfds + rx_ring_size - 1;
-	rfd->v_next = dma->rfds;
-	rfd->b_next = SWAP32(virt_to_dma(lp, dma->rfds));
-	rfd->cmd = SWAP16(CMD_EOL|CMD_FLEX);
-
-	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
-	return 0;
-}
-
-static inline void remove_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_rbd *rbd;
-	int i;
-
-	for (i = 0, rbd = lp->dma->rbds; i < rx_ring_size; i++, rbd++) {
-		if (rbd->skb == NULL)
-			break;
-		dma_unmap_single(dev->dev.parent,
-				 (dma_addr_t)SWAP32(rbd->b_data),
-				 PKT_BUF_SZ, DMA_FROM_DEVICE);
-		dev_kfree_skb(rbd->skb);
-	}
-}
-
-
-static void rebuild_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma = lp->dma;
-	int i;
-
-	/* Ensure rx frame/buffer descriptors are tidy */
-
-	for (i = 0; i < rx_ring_size; i++) {
-		dma->rfds[i].rbd = I596_NULL;
-		dma->rfds[i].cmd = SWAP16(CMD_FLEX);
-	}
-	dma->rfds[rx_ring_size-1].cmd = SWAP16(CMD_EOL|CMD_FLEX);
-	lp->rfd_head = dma->rfds;
-	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
-	lp->rbd_head = dma->rbds;
-	dma->rfds[0].rbd = SWAP32(virt_to_dma(lp, dma->rbds));
-
-	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
-}
-
-
-static int init_i596_mem(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma = lp->dma;
-	unsigned long flags;
-
-	mpu_port(dev, PORT_RESET, 0);
-	udelay(100);			/* Wait 100us - seems to help */
-
-	/* change the scp address */
-
-	lp->last_cmd = jiffies;
-
-	dma->scp.sysbus = SYSBUS;
-	dma->scp.iscp = SWAP32(virt_to_dma(lp, &(dma->iscp)));
-	dma->iscp.scb = SWAP32(virt_to_dma(lp, &(dma->scb)));
-	dma->iscp.stat = SWAP32(ISCP_BUSY);
-	lp->cmd_backlog = 0;
-
-	lp->cmd_head = NULL;
-	dma->scb.cmd = I596_NULL;
-
-	DEB(DEB_INIT, printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
-
-	DMA_WBACK(dev, &(dma->scp), sizeof(struct i596_scp));
-	DMA_WBACK(dev, &(dma->iscp), sizeof(struct i596_iscp));
-	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
-
-	mpu_port(dev, PORT_ALTSCP, virt_to_dma(lp, &dma->scp));
-	ca(dev);
-	if (wait_istat(dev, dma, 1000, "initialization timed out"))
-		goto failed;
-	DEB(DEB_INIT, printk(KERN_DEBUG
-			     "%s: i82596 initialization successful\n",
-			     dev->name));
-
-	if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) {
-		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
-		goto failed;
-	}
-
-	/* Ensure rx frame/buffer descriptors are tidy */
-	rebuild_rx_bufs(dev);
-
-	dma->scb.command = 0;
-	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
-
-	DEB(DEB_INIT, printk(KERN_DEBUG
-			     "%s: queuing CmdConfigure\n", dev->name));
-	memcpy(dma->cf_cmd.i596_config, init_setup, 14);
-	dma->cf_cmd.cmd.command = SWAP16(CmdConfigure);
-	DMA_WBACK(dev, &(dma->cf_cmd), sizeof(struct cf_cmd));
-	i596_add_cmd(dev, &dma->cf_cmd.cmd);
-
-	DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
-	memcpy(dma->sa_cmd.eth_addr, dev->dev_addr, 6);
-	dma->sa_cmd.cmd.command = SWAP16(CmdSASetup);
-	DMA_WBACK(dev, &(dma->sa_cmd), sizeof(struct sa_cmd));
-	i596_add_cmd(dev, &dma->sa_cmd.cmd);
-
-	DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
-	dma->tdr_cmd.cmd.command = SWAP16(CmdTDR);
-	DMA_WBACK(dev, &(dma->tdr_cmd), sizeof(struct tdr_cmd));
-	i596_add_cmd(dev, &dma->tdr_cmd.cmd);
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	if (wait_cmd(dev, dma, 1000, "timed out waiting to issue RX_START")) {
-		spin_unlock_irqrestore (&lp->lock, flags);
-		goto failed_free_irq;
-	}
-	DEB(DEB_INIT, printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
-	dma->scb.command = SWAP16(RX_START);
-	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
-	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
-
-	ca(dev);
-
-	spin_unlock_irqrestore (&lp->lock, flags);
-	if (wait_cmd(dev, dma, 1000, "RX_START not processed"))
-		goto failed_free_irq;
-	DEB(DEB_INIT, printk(KERN_DEBUG
-			     "%s: Receive unit started OK\n", dev->name));
-	return 0;
-
-failed_free_irq:
-	free_irq(dev->irq, dev);
-failed:
-	printk(KERN_ERR "%s: Failed to initialise 82596\n", dev->name);
-	mpu_port(dev, PORT_RESET, 0);
-	return -1;
-}
-
-
-static inline int i596_rx(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-	int frames = 0;
-
-	DEB(DEB_RXFRAME, printk(KERN_DEBUG
-				"i596_rx(), rfd_head %p, rbd_head %p\n",
-				lp->rfd_head, lp->rbd_head));
-
-
-	rfd = lp->rfd_head;		/* Ref next frame to check */
-
-	DMA_INV(dev, rfd, sizeof(struct i596_rfd));
-	while (rfd->stat & SWAP16(STAT_C)) {	/* Loop while complete frames */
-		if (rfd->rbd == I596_NULL)
-			rbd = NULL;
-		else if (rfd->rbd == lp->rbd_head->b_addr) {
-			rbd = lp->rbd_head;
-			DMA_INV(dev, rbd, sizeof(struct i596_rbd));
-		} else {
-			printk(KERN_ERR "%s: rbd chain broken!\n", dev->name);
-			/* XXX Now what? */
-			rbd = NULL;
-		}
-		DEB(DEB_RXFRAME, printk(KERN_DEBUG
-				      "  rfd %p, rfd.rbd %08x, rfd.stat %04x\n",
-				      rfd, rfd->rbd, rfd->stat));
-
-		if (rbd != NULL && (rfd->stat & SWAP16(STAT_OK))) {
-			/* a good frame */
-			int pkt_len = SWAP16(rbd->count) & 0x3fff;
-			struct sk_buff *skb = rbd->skb;
-			int rx_in_place = 0;
-
-			DEB(DEB_RXADDR, print_eth(rbd->v_data, "received"));
-			frames++;
-
-			/* Check if the packet is long enough to just accept
-			 * without copying to a properly sized skbuff.
-			 */
-
-			if (pkt_len > rx_copybreak) {
-				struct sk_buff *newskb;
-				dma_addr_t dma_addr;
-
-				dma_unmap_single(dev->dev.parent,
-						 (dma_addr_t)SWAP32(rbd->b_data),
-						 PKT_BUF_SZ, DMA_FROM_DEVICE);
-				/* Get fresh skbuff to replace filled one. */
-				newskb = netdev_alloc_skb_ip_align(dev,
-								   PKT_BUF_SZ);
-				if (newskb == NULL) {
-					skb = NULL;	/* drop pkt */
-					goto memory_squeeze;
-				}
-
-				/* Pass up the skb already on the Rx ring. */
-				skb_put(skb, pkt_len);
-				rx_in_place = 1;
-				rbd->skb = newskb;
-				dma_addr = dma_map_single(dev->dev.parent,
-							  newskb->data,
-							  PKT_BUF_SZ,
-							  DMA_FROM_DEVICE);
-				rbd->v_data = newskb->data;
-				rbd->b_data = SWAP32(dma_addr);
-				DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
-			} else
-				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
-memory_squeeze:
-			if (skb == NULL) {
-				/* XXX tulip.c can defer packets here!! */
-				printk(KERN_ERR
-				       "%s: i596_rx Memory squeeze, dropping packet.\n",
-				       dev->name);
-				dev->stats.rx_dropped++;
-			} else {
-				if (!rx_in_place) {
-					/* 16 byte align the data fields */
-					dma_sync_single_for_cpu(dev->dev.parent,
-								(dma_addr_t)SWAP32(rbd->b_data),
-								PKT_BUF_SZ, DMA_FROM_DEVICE);
-					memcpy(skb_put(skb, pkt_len), rbd->v_data, pkt_len);
-					dma_sync_single_for_device(dev->dev.parent,
-								   (dma_addr_t)SWAP32(rbd->b_data),
-								   PKT_BUF_SZ, DMA_FROM_DEVICE);
-				}
-				skb->len = pkt_len;
-				skb->protocol = eth_type_trans(skb, dev);
-				netif_rx(skb);
-				dev->stats.rx_packets++;
-				dev->stats.rx_bytes += pkt_len;
-			}
-		} else {
-			DEB(DEB_ERRORS, printk(KERN_DEBUG
-					       "%s: Error, rfd.stat = 0x%04x\n",
-					       dev->name, rfd->stat));
-			dev->stats.rx_errors++;
-			if (rfd->stat & SWAP16(0x0100))
-				dev->stats.collisions++;
-			if (rfd->stat & SWAP16(0x8000))
-				dev->stats.rx_length_errors++;
-			if (rfd->stat & SWAP16(0x0001))
-				dev->stats.rx_over_errors++;
-			if (rfd->stat & SWAP16(0x0002))
-				dev->stats.rx_fifo_errors++;
-			if (rfd->stat & SWAP16(0x0004))
-				dev->stats.rx_frame_errors++;
-			if (rfd->stat & SWAP16(0x0008))
-				dev->stats.rx_crc_errors++;
-			if (rfd->stat & SWAP16(0x0010))
-				dev->stats.rx_length_errors++;
-		}
-
-		/* Clear the buffer descriptor count and EOF + F flags */
-
-		if (rbd != NULL && (rbd->count & SWAP16(0x4000))) {
-			rbd->count = 0;
-			lp->rbd_head = rbd->v_next;
-			DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
-		}
-
-		/* Tidy the frame descriptor, marking it as end of list */
-
-		rfd->rbd = I596_NULL;
-		rfd->stat = 0;
-		rfd->cmd = SWAP16(CMD_EOL|CMD_FLEX);
-		rfd->count = 0;
-
-		/* Update record of next frame descriptor to process */
-
-		lp->dma->scb.rfd = rfd->b_next;
-		lp->rfd_head = rfd->v_next;
-		DMA_WBACK_INV(dev, rfd, sizeof(struct i596_rfd));
-
-		/* Remove end-of-list from old end descriptor */
-
-		rfd->v_prev->cmd = SWAP16(CMD_FLEX);
-		DMA_WBACK_INV(dev, rfd->v_prev, sizeof(struct i596_rfd));
-		rfd = lp->rfd_head;
-		DMA_INV(dev, rfd, sizeof(struct i596_rfd));
-	}
-
-	DEB(DEB_RXFRAME, printk(KERN_DEBUG "frames %d\n", frames));
-
-	return 0;
-}
-
-
-static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
-{
-	struct i596_cmd *ptr;
-
-	while (lp->cmd_head != NULL) {
-		ptr = lp->cmd_head;
-		lp->cmd_head = ptr->v_next;
-		lp->cmd_backlog--;
-
-		switch (SWAP16(ptr->command) & 0x7) {
-		case CmdTx:
-			{
-				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
-				struct sk_buff *skb = tx_cmd->skb;
-				dma_unmap_single(dev->dev.parent,
-						 tx_cmd->dma_addr,
-						 skb->len, DMA_TO_DEVICE);
-
-				dev_kfree_skb(skb);
-
-				dev->stats.tx_errors++;
-				dev->stats.tx_aborted_errors++;
-
-				ptr->v_next = NULL;
-				ptr->b_next = I596_NULL;
-				tx_cmd->cmd.command = 0;  /* Mark as free */
-				break;
-			}
-		default:
-			ptr->v_next = NULL;
-			ptr->b_next = I596_NULL;
-		}
-		DMA_WBACK_INV(dev, ptr, sizeof(struct i596_cmd));
-	}
-
-	wait_cmd(dev, lp->dma, 100, "i596_cleanup_cmd timed out");
-	lp->dma->scb.cmd = I596_NULL;
-	DMA_WBACK(dev, &(lp->dma->scb), sizeof(struct i596_scb));
-}
-
-
-static inline void i596_reset(struct net_device *dev, struct i596_private *lp)
-{
-	unsigned long flags;
-
-	DEB(DEB_RESET, printk(KERN_DEBUG "i596_reset\n"));
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	wait_cmd(dev, lp->dma, 100, "i596_reset timed out");
-
-	netif_stop_queue(dev);
-
-	/* FIXME: this command might cause an lpmc */
-	lp->dma->scb.command = SWAP16(CUC_ABORT | RX_ABORT);
-	DMA_WBACK(dev, &(lp->dma->scb), sizeof(struct i596_scb));
-	ca(dev);
-
-	/* wait for shutdown */
-	wait_cmd(dev, lp->dma, 1000, "i596_reset 2 timed out");
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	i596_cleanup_cmd(dev, lp);
-	i596_rx(dev);
-
-	netif_start_queue(dev);
-	init_i596_mem(dev);
-}
-
-
-static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma = lp->dma;
-	unsigned long flags;
-
-	DEB(DEB_ADDCMD, printk(KERN_DEBUG "i596_add_cmd cmd_head %p\n",
-			       lp->cmd_head));
-
-	cmd->status = 0;
-	cmd->command |= SWAP16(CMD_EOL | CMD_INTR);
-	cmd->v_next = NULL;
-	cmd->b_next = I596_NULL;
-	DMA_WBACK(dev, cmd, sizeof(struct i596_cmd));
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	if (lp->cmd_head != NULL) {
-		lp->cmd_tail->v_next = cmd;
-		lp->cmd_tail->b_next = SWAP32(virt_to_dma(lp, &cmd->status));
-		DMA_WBACK(dev, lp->cmd_tail, sizeof(struct i596_cmd));
-	} else {
-		lp->cmd_head = cmd;
-		wait_cmd(dev, dma, 100, "i596_add_cmd timed out");
-		dma->scb.cmd = SWAP32(virt_to_dma(lp, &cmd->status));
-		dma->scb.command = SWAP16(CUC_START);
-		DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
-		ca(dev);
-	}
-	lp->cmd_tail = cmd;
-	lp->cmd_backlog++;
-
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	if (lp->cmd_backlog > max_cmd_backlog) {
-		unsigned long tickssofar = jiffies - lp->last_cmd;
-
-		if (tickssofar < ticks_limit)
-			return;
-
-		printk(KERN_ERR
-		       "%s: command unit timed out, status resetting.\n",
-		       dev->name);
-#if 1
-		i596_reset(dev, lp);
-#endif
-	}
-}
-
-static int i596_open(struct net_device *dev)
-{
-	DEB(DEB_OPEN, printk(KERN_DEBUG
-			     "%s: i596_open() irq %d.\n", dev->name, dev->irq));
-
-	if (init_rx_bufs(dev)) {
-		printk(KERN_ERR "%s: Failed to init rx bufs\n", dev->name);
-		return -EAGAIN;
-	}
-	if (init_i596_mem(dev)) {
-		printk(KERN_ERR "%s: Failed to init memory\n", dev->name);
-		goto out_remove_rx_bufs;
-	}
-	netif_start_queue(dev);
-
-	return 0;
-
-out_remove_rx_bufs:
-	remove_rx_bufs(dev);
-	return -EAGAIN;
-}
-
-static void i596_tx_timeout (struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-
-	/* Transmitter timeout, serious problems. */
-	DEB(DEB_ERRORS, printk(KERN_DEBUG
-			       "%s: transmit timed out, status resetting.\n",
-			       dev->name));
-
-	dev->stats.tx_errors++;
-
-	/* Try to restart the adaptor */
-	if (lp->last_restart == dev->stats.tx_packets) {
-		DEB(DEB_ERRORS, printk(KERN_DEBUG "Resetting board.\n"));
-		/* Shutdown and restart */
-		i596_reset (dev, lp);
-	} else {
-		/* Issue a channel attention signal */
-		DEB(DEB_ERRORS, printk(KERN_DEBUG "Kicking board.\n"));
-		lp->dma->scb.command = SWAP16(CUC_START | RX_START);
-		DMA_WBACK_INV(dev, &(lp->dma->scb), sizeof(struct i596_scb));
-		ca (dev);
-		lp->last_restart = dev->stats.tx_packets;
-	}
-
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	netif_wake_queue (dev);
-}
-
-
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct tx_cmd *tx_cmd;
-	struct i596_tbd *tbd;
-	short length = skb->len;
-
-	DEB(DEB_STARTTX, printk(KERN_DEBUG
-				"%s: i596_start_xmit(%x,%p) called\n",
-				dev->name, skb->len, skb->data));
-
-	if (length < ETH_ZLEN) {
-		if (skb_padto(skb, ETH_ZLEN))
-			return NETDEV_TX_OK;
-		length = ETH_ZLEN;
-	}
-
-	netif_stop_queue(dev);
-
-	tx_cmd = lp->dma->tx_cmds + lp->next_tx_cmd;
-	tbd = lp->dma->tbds + lp->next_tx_cmd;
-
-	if (tx_cmd->cmd.command) {
-		DEB(DEB_ERRORS, printk(KERN_DEBUG
-				       "%s: xmit ring full, dropping packet.\n",
-				       dev->name));
-		dev->stats.tx_dropped++;
-
-		dev_kfree_skb(skb);
-	} else {
-		if (++lp->next_tx_cmd == TX_RING_SIZE)
-			lp->next_tx_cmd = 0;
-		tx_cmd->tbd = SWAP32(virt_to_dma(lp, tbd));
-		tbd->next = I596_NULL;
-
-		tx_cmd->cmd.command = SWAP16(CMD_FLEX | CmdTx);
-		tx_cmd->skb = skb;
-
-		tx_cmd->pad = 0;
-		tx_cmd->size = 0;
-		tbd->pad = 0;
-		tbd->size = SWAP16(EOF | length);
-
-		tx_cmd->dma_addr = dma_map_single(dev->dev.parent, skb->data,
-						  skb->len, DMA_TO_DEVICE);
-		tbd->data = SWAP32(tx_cmd->dma_addr);
-
-		DEB(DEB_TXADDR, print_eth(skb->data, "tx-queued"));
-		DMA_WBACK_INV(dev, tx_cmd, sizeof(struct tx_cmd));
-		DMA_WBACK_INV(dev, tbd, sizeof(struct i596_tbd));
-		i596_add_cmd(dev, &tx_cmd->cmd);
-
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += length;
-	}
-
-	netif_start_queue(dev);
-
-	return NETDEV_TX_OK;
-}
-
-static void print_eth(unsigned char *add, char *str)
-{
-	printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
-	       add, add + 6, add, add[12], add[13], str);
-}
-static const struct net_device_ops i596_netdev_ops = {
-	.ndo_open		= i596_open,
-	.ndo_stop		= i596_close,
-	.ndo_start_xmit		= i596_start_xmit,
-	.ndo_set_multicast_list	= set_multicast_list,
-	.ndo_tx_timeout		= i596_tx_timeout,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= i596_poll_controller,
-#endif
-};
-
-static int __devinit i82596_probe(struct net_device *dev)
-{
-	int i;
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma;
-
-	/* This lot is ensure things have been cache line aligned. */
-	BUILD_BUG_ON(sizeof(struct i596_rfd) != 32);
-	BUILD_BUG_ON(sizeof(struct i596_rbd) &  31);
-	BUILD_BUG_ON(sizeof(struct tx_cmd)   &  31);
-	BUILD_BUG_ON(sizeof(struct i596_tbd) != 32);
-#ifndef __LP64__
-	BUILD_BUG_ON(sizeof(struct i596_dma) > 4096);
-#endif
-
-	if (!dev->base_addr || !dev->irq)
-		return -ENODEV;
-
-	dma = (struct i596_dma *) DMA_ALLOC(dev->dev.parent,
-		sizeof(struct i596_dma), &lp->dma_addr, GFP_KERNEL);
-	if (!dma) {
-		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
-		return -ENOMEM;
-	}
-
-	dev->netdev_ops = &i596_netdev_ops;
-	dev->watchdog_timeo = TX_TIMEOUT;
-
-	memset(dma, 0, sizeof(struct i596_dma));
-	lp->dma = dma;
-
-	dma->scb.command = 0;
-	dma->scb.cmd = I596_NULL;
-	dma->scb.rfd = I596_NULL;
-	spin_lock_init(&lp->lock);
-
-	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
-
-	i = register_netdev(dev);
-	if (i) {
-		DMA_FREE(dev->dev.parent, sizeof(struct i596_dma),
-				    (void *)dma, lp->dma_addr);
-		return i;
-	}
-
-	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx, %pM IRQ %d.\n",
-			      dev->name, dev->base_addr, dev->dev_addr,
-			      dev->irq));
-	DEB(DEB_INIT, printk(KERN_INFO
-			     "%s: dma at 0x%p (%d bytes), lp->scb at 0x%p\n",
-			     dev->name, dma, (int)sizeof(struct i596_dma),
-			     &dma->scb));
-
-	return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void i596_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	i596_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-static irqreturn_t i596_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct i596_private *lp;
-	struct i596_dma *dma;
-	unsigned short status, ack_cmd = 0;
-
-	lp = netdev_priv(dev);
-	dma = lp->dma;
-
-	spin_lock (&lp->lock);
-
-	wait_cmd(dev, dma, 100, "i596 interrupt, timeout");
-	status = SWAP16(dma->scb.status);
-
-	DEB(DEB_INTS, printk(KERN_DEBUG
-			     "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
-			dev->name, dev->irq, status));
-
-	ack_cmd = status & 0xf000;
-
-	if (!ack_cmd) {
-		DEB(DEB_ERRORS, printk(KERN_DEBUG
-				       "%s: interrupt with no events\n",
-				       dev->name));
-		spin_unlock (&lp->lock);
-		return IRQ_NONE;
-	}
-
-	if ((status & 0x8000) || (status & 0x2000)) {
-		struct i596_cmd *ptr;
-
-		if ((status & 0x8000))
-			DEB(DEB_INTS,
-			    printk(KERN_DEBUG
-				   "%s: i596 interrupt completed command.\n",
-				   dev->name));
-		if ((status & 0x2000))
-			DEB(DEB_INTS,
-			    printk(KERN_DEBUG
-				   "%s: i596 interrupt command unit inactive %x.\n",
-				   dev->name, status & 0x0700));
-
-		while (lp->cmd_head != NULL) {
-			DMA_INV(dev, lp->cmd_head, sizeof(struct i596_cmd));
-			if (!(lp->cmd_head->status & SWAP16(STAT_C)))
-				break;
-
-			ptr = lp->cmd_head;
-
-			DEB(DEB_STATUS,
-			    printk(KERN_DEBUG
-				   "cmd_head->status = %04x, ->command = %04x\n",
-				   SWAP16(lp->cmd_head->status),
-				   SWAP16(lp->cmd_head->command)));
-			lp->cmd_head = ptr->v_next;
-			lp->cmd_backlog--;
-
-			switch (SWAP16(ptr->command) & 0x7) {
-			case CmdTx:
-			    {
-				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
-				struct sk_buff *skb = tx_cmd->skb;
-
-				if (ptr->status & SWAP16(STAT_OK)) {
-					DEB(DEB_TXADDR,
-					    print_eth(skb->data, "tx-done"));
-				} else {
-					dev->stats.tx_errors++;
-					if (ptr->status & SWAP16(0x0020))
-						dev->stats.collisions++;
-					if (!(ptr->status & SWAP16(0x0040)))
-						dev->stats.tx_heartbeat_errors++;
-					if (ptr->status & SWAP16(0x0400))
-						dev->stats.tx_carrier_errors++;
-					if (ptr->status & SWAP16(0x0800))
-						dev->stats.collisions++;
-					if (ptr->status & SWAP16(0x1000))
-						dev->stats.tx_aborted_errors++;
-				}
-				dma_unmap_single(dev->dev.parent,
-						 tx_cmd->dma_addr,
-						 skb->len, DMA_TO_DEVICE);
-				dev_kfree_skb_irq(skb);
-
-				tx_cmd->cmd.command = 0; /* Mark free */
-				break;
-			    }
-			case CmdTDR:
-			    {
-				unsigned short status = SWAP16(((struct tdr_cmd *)ptr)->status);
-
-				if (status & 0x8000) {
-					DEB(DEB_ANY,
-					    printk(KERN_DEBUG "%s: link ok.\n",
-						   dev->name));
-				} else {
-					if (status & 0x4000)
-						printk(KERN_ERR
-						       "%s: Transceiver problem.\n",
-						       dev->name);
-					if (status & 0x2000)
-						printk(KERN_ERR
-						       "%s: Termination problem.\n",
-						       dev->name);
-					if (status & 0x1000)
-						printk(KERN_ERR
-						       "%s: Short circuit.\n",
-						       dev->name);
-
-					DEB(DEB_TDR,
-					    printk(KERN_DEBUG "%s: Time %d.\n",
-						   dev->name, status & 0x07ff));
-				}
-				break;
-			    }
-			case CmdConfigure:
-				/*
-				 * Zap command so set_multicast_list() know
-				 * it is free
-				 */
-				ptr->command = 0;
-				break;
-			}
-			ptr->v_next = NULL;
-			ptr->b_next = I596_NULL;
-			DMA_WBACK(dev, ptr, sizeof(struct i596_cmd));
-			lp->last_cmd = jiffies;
-		}
-
-		/* This mess is arranging that only the last of any outstanding
-		 * commands has the interrupt bit set.  Should probably really
-		 * only add to the cmd queue when the CU is stopped.
-		 */
-		ptr = lp->cmd_head;
-		while ((ptr != NULL) && (ptr != lp->cmd_tail)) {
-			struct i596_cmd *prev = ptr;
-
-			ptr->command &= SWAP16(0x1fff);
-			ptr = ptr->v_next;
-			DMA_WBACK_INV(dev, prev, sizeof(struct i596_cmd));
-		}
-
-		if (lp->cmd_head != NULL)
-			ack_cmd |= CUC_START;
-		dma->scb.cmd = SWAP32(virt_to_dma(lp, &lp->cmd_head->status));
-		DMA_WBACK_INV(dev, &dma->scb, sizeof(struct i596_scb));
-	}
-	if ((status & 0x1000) || (status & 0x4000)) {
-		if ((status & 0x4000))
-			DEB(DEB_INTS,
-			    printk(KERN_DEBUG
-				   "%s: i596 interrupt received a frame.\n",
-				   dev->name));
-		i596_rx(dev);
-		/* Only RX_START if stopped - RGH 07-07-96 */
-		if (status & 0x1000) {
-			if (netif_running(dev)) {
-				DEB(DEB_ERRORS,
-				    printk(KERN_DEBUG
-					   "%s: i596 interrupt receive unit inactive, status 0x%x\n",
-					   dev->name, status));
-				ack_cmd |= RX_START;
-				dev->stats.rx_errors++;
-				dev->stats.rx_fifo_errors++;
-				rebuild_rx_bufs(dev);
-			}
-		}
-	}
-	wait_cmd(dev, dma, 100, "i596 interrupt, timeout");
-	dma->scb.command = SWAP16(ack_cmd);
-	DMA_WBACK(dev, &dma->scb, sizeof(struct i596_scb));
-
-	/* DANGER: I suspect that some kind of interrupt
-	 acknowledgement aside from acking the 82596 might be needed
-	 here...  but it's running acceptably without */
-
-	ca(dev);
-
-	wait_cmd(dev, dma, 100, "i596 interrupt, exit timeout");
-	DEB(DEB_INTS, printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
-
-	spin_unlock (&lp->lock);
-	return IRQ_HANDLED;
-}
-
-static int i596_close(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	netif_stop_queue(dev);
-
-	DEB(DEB_INIT,
-	    printk(KERN_DEBUG
-		   "%s: Shutting down ethercard, status was %4.4x.\n",
-		   dev->name, SWAP16(lp->dma->scb.status)));
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	wait_cmd(dev, lp->dma, 100, "close1 timed out");
-	lp->dma->scb.command = SWAP16(CUC_ABORT | RX_ABORT);
-	DMA_WBACK(dev, &lp->dma->scb, sizeof(struct i596_scb));
-
-	ca(dev);
-
-	wait_cmd(dev, lp->dma, 100, "close2 timed out");
-	spin_unlock_irqrestore(&lp->lock, flags);
-	DEB(DEB_STRUCT, i596_display_data(dev));
-	i596_cleanup_cmd(dev, lp);
-
-	free_irq(dev->irq, dev);
-	remove_rx_bufs(dev);
-
-	return 0;
-}
-
-/*
- *    Set or clear the multicast filter for this adaptor.
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct i596_private *lp = netdev_priv(dev);
-	struct i596_dma *dma = lp->dma;
-	int config = 0, cnt;
-
-	DEB(DEB_MULTI,
-	    printk(KERN_DEBUG
-		   "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
-		   dev->name, netdev_mc_count(dev),
-		   dev->flags & IFF_PROMISC ? "ON" : "OFF",
-		   dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
-
-	if ((dev->flags & IFF_PROMISC) &&
-	    !(dma->cf_cmd.i596_config[8] & 0x01)) {
-		dma->cf_cmd.i596_config[8] |= 0x01;
-		config = 1;
-	}
-	if (!(dev->flags & IFF_PROMISC) &&
-	    (dma->cf_cmd.i596_config[8] & 0x01)) {
-		dma->cf_cmd.i596_config[8] &= ~0x01;
-		config = 1;
-	}
-	if ((dev->flags & IFF_ALLMULTI) &&
-	    (dma->cf_cmd.i596_config[11] & 0x20)) {
-		dma->cf_cmd.i596_config[11] &= ~0x20;
-		config = 1;
-	}
-	if (!(dev->flags & IFF_ALLMULTI) &&
-	    !(dma->cf_cmd.i596_config[11] & 0x20)) {
-		dma->cf_cmd.i596_config[11] |= 0x20;
-		config = 1;
-	}
-	if (config) {
-		if (dma->cf_cmd.cmd.command)
-			printk(KERN_INFO
-			       "%s: config change request already queued\n",
-			       dev->name);
-		else {
-			dma->cf_cmd.cmd.command = SWAP16(CmdConfigure);
-			DMA_WBACK_INV(dev, &dma->cf_cmd, sizeof(struct cf_cmd));
-			i596_add_cmd(dev, &dma->cf_cmd.cmd);
-		}
-	}
-
-	cnt = netdev_mc_count(dev);
-	if (cnt > MAX_MC_CNT) {
-		cnt = MAX_MC_CNT;
-		printk(KERN_NOTICE "%s: Only %d multicast addresses supported",
-			dev->name, cnt);
-	}
-
-	if (!netdev_mc_empty(dev)) {
-		struct netdev_hw_addr *ha;
-		unsigned char *cp;
-		struct mc_cmd *cmd;
-
-		cmd = &dma->mc_cmd;
-		cmd->cmd.command = SWAP16(CmdMulticastList);
-		cmd->mc_cnt = SWAP16(netdev_mc_count(dev) * 6);
-		cp = cmd->mc_addrs;
-		netdev_for_each_mc_addr(ha, dev) {
-			if (!cnt--)
-				break;
-			memcpy(cp, ha->addr, 6);
-			if (i596_debug > 1)
-				DEB(DEB_MULTI,
-				    printk(KERN_DEBUG
-					   "%s: Adding address %pM\n",
-					   dev->name, cp));
-			cp += 6;
-		}
-		DMA_WBACK_INV(dev, &dma->mc_cmd, sizeof(struct mc_cmd));
-		i596_add_cmd(dev, &cmd->cmd);
-	}
-}