ixgbe: Refactor common code between 82598 & 82599 to accommodate new hardware

Some of the following MAC functions are moved from 82598 & 82599 specific
hardware files to common.[ch] to accommodate new silicon changes. Also
fixed some white space issues
 * get_san_mac_addr, check_link, set_vmdq, clear_vmdq, clear_vfta,
 * set_vfta, fc_enable, init_uta_tables

Signed-off-by:  Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 557 insertions, 421 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 35a06b4758..f2b7ff4 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -42,9 +42,9 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
                                              ixgbe_link_speed *speed,
                                              bool *autoneg);
 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
-                                               ixgbe_link_speed speed,
-                                               bool autoneg,
-                                               bool autoneg_wait_to_complete);
+                                         ixgbe_link_speed speed,
+                                         bool autoneg,
+                                         bool autoneg_wait_to_complete);
 static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
                                        u8 *eeprom_data);
 
@@ -1221,7 +1221,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
 	.init_params		= &ixgbe_init_eeprom_params_generic,
-	.read			= &ixgbe_read_eeprom_generic,
+	.read			= &ixgbe_read_eerd_generic,
 	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
 	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
 };
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 38c3840..dc197a4 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -133,27 +133,6 @@ setup_sfp_out:
 	return ret_val;
 }
 
-/**
- *  ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count
- *  @hw: pointer to hardware structure
- *
- *  Read PCIe configuration space, and get the MSI-X vector count from
- *  the capabilities table.
- **/
-static u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
-{
-	struct ixgbe_adapter *adapter = hw->back;
-	u16 msix_count;
-	pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS,
-	                     &msix_count);
-	msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
-
-	/* MSI-X count is zero-based in HW, so increment to give proper value */
-	msix_count++;
-
-	return msix_count;
-}
-
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
@@ -165,7 +144,7 @@ static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
 	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
 	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
 
 	return 0;
 }
@@ -735,60 +714,6 @@ out:
 }
 
 /**
- *  ixgbe_check_mac_link_82599 - Determine link and speed status
- *  @hw: pointer to hardware structure
- *  @speed: pointer to link speed
- *  @link_up: true when link is up
- *  @link_up_wait_to_complete: bool used to wait for link up or not
- *
- *  Reads the links register to determine if link is up and the current speed
- **/
-static s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw,
-                                      ixgbe_link_speed *speed,
-                                      bool *link_up,
-                                      bool link_up_wait_to_complete)
-{
-	u32 links_reg;
-	u32 i;
-
-	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-	if (link_up_wait_to_complete) {
-		for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
-			if (links_reg & IXGBE_LINKS_UP) {
-				*link_up = true;
-				break;
-			} else {
-				*link_up = false;
-			}
-			msleep(100);
-			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-		}
-	} else {
-		if (links_reg & IXGBE_LINKS_UP)
-			*link_up = true;
-		else
-			*link_up = false;
-	}
-
-	if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
-	    IXGBE_LINKS_SPEED_10G_82599)
-		*speed = IXGBE_LINK_SPEED_10GB_FULL;
-	else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
-	         IXGBE_LINKS_SPEED_1G_82599)
-		*speed = IXGBE_LINK_SPEED_1GB_FULL;
-	else
-		*speed = IXGBE_LINK_SPEED_100_FULL;
-
-	/* if link is down, zero out the current_mode */
-	if (*link_up == false) {
-		hw->fc.current_mode = ixgbe_fc_none;
-		hw->fc.fc_was_autonegged = false;
-	}
-
-	return 0;
-}
-
-/**
  *  ixgbe_setup_mac_link_82599 - Set MAC link speed
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
@@ -1050,243 +975,6 @@ reset_hw_out:
 }
 
 /**
- *  ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address
- *  @hw: pointer to hardware struct
- *  @rar: receive address register index to disassociate
- *  @vmdq: VMDq pool index to remove from the rar
- **/
-static s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
-	u32 mpsar_lo, mpsar_hi;
-	u32 rar_entries = hw->mac.num_rar_entries;
-
-	if (rar < rar_entries) {
-		mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
-		mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
-
-		if (!mpsar_lo && !mpsar_hi)
-			goto done;
-
-		if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
-			if (mpsar_lo) {
-				IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
-				mpsar_lo = 0;
-			}
-			if (mpsar_hi) {
-				IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
-				mpsar_hi = 0;
-			}
-		} else if (vmdq < 32) {
-			mpsar_lo &= ~(1 << vmdq);
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
-		} else {
-			mpsar_hi &= ~(1 << (vmdq - 32));
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
-		}
-
-		/* was that the last pool using this rar? */
-		if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
-			hw->mac.ops.clear_rar(hw, rar);
-	} else {
-		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
-	}
-
-done:
-	return 0;
-}
-
-/**
- *  ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address
- *  @hw: pointer to hardware struct
- *  @rar: receive address register index to associate with a VMDq index
- *  @vmdq: VMDq pool index
- **/
-static s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
-	u32 mpsar;
-	u32 rar_entries = hw->mac.num_rar_entries;
-
-	if (rar < rar_entries) {
-		if (vmdq < 32) {
-			mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
-			mpsar |= 1 << vmdq;
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
-		} else {
-			mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
-			mpsar |= 1 << (vmdq - 32);
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
-		}
-	} else {
-		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
-	}
-	return 0;
-}
-
-/**
- *  ixgbe_set_vfta_82599 - Set VLAN filter table
- *  @hw: pointer to hardware structure
- *  @vlan: VLAN id to write to VLAN filter
- *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
- *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
- *
- *  Turn on/off specified VLAN in the VLAN filter table.
- **/
-static s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind,
-                                bool vlan_on)
-{
-	u32 regindex;
-	u32 vlvf_index;
-	u32 bitindex;
-	u32 bits;
-	u32 first_empty_slot;
-	u32 vt_ctl;
-
-	if (vlan > 4095)
-		return IXGBE_ERR_PARAM;
-
-	/*
-	 * this is a 2 part operation - first the VFTA, then the
-	 * VLVF and VLVFB if vind is set
-	 */
-
-	/* Part 1
-	 * The VFTA is a bitstring made up of 128 32-bit registers
-	 * that enable the particular VLAN id, much like the MTA:
-	 *    bits[11-5]: which register
-	 *    bits[4-0]:  which bit in the register
-	 */
-	regindex = (vlan >> 5) & 0x7F;
-	bitindex = vlan & 0x1F;
-	bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
-	if (vlan_on)
-		bits |= (1 << bitindex);
-	else
-		bits &= ~(1 << bitindex);
-	IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
-
-
-	/* Part 2
-	 * If VT mode is set
-	 *   Either vlan_on
-	 *     make sure the vlan is in VLVF
-	 *     set the vind bit in the matching VLVFB
-	 *   Or !vlan_on
-	 *     clear the pool bit and possibly the vind
-	 */
-	vt_ctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
-	if (!(vt_ctl & IXGBE_VT_CTL_VT_ENABLE))
-		goto out;
-
-	/* find the vlanid or the first empty slot */
-	first_empty_slot = 0;
-
-	for (vlvf_index = 1; vlvf_index < IXGBE_VLVF_ENTRIES; vlvf_index++) {
-		bits = IXGBE_READ_REG(hw, IXGBE_VLVF(vlvf_index));
-		if (!bits && !first_empty_slot)
-			first_empty_slot = vlvf_index;
-		else if ((bits & 0x0FFF) == vlan)
-			break;
-	}
-
-	if (vlvf_index >= IXGBE_VLVF_ENTRIES) {
-		if (first_empty_slot)
-			vlvf_index = first_empty_slot;
-		else {
-			hw_dbg(hw, "No space in VLVF.\n");
-			goto out;
-		}
-	}
-
-	if (vlan_on) {
-		/* set the pool bit */
-		if (vind < 32) {
-			bits = IXGBE_READ_REG(hw,
-					      IXGBE_VLVFB(vlvf_index * 2));
-			bits |= (1 << vind);
-			IXGBE_WRITE_REG(hw,
-					IXGBE_VLVFB(vlvf_index * 2), bits);
-		} else {
-			bits = IXGBE_READ_REG(hw,
-				IXGBE_VLVFB((vlvf_index * 2) + 1));
-			bits |= (1 << (vind - 32));
-			IXGBE_WRITE_REG(hw,
-				IXGBE_VLVFB((vlvf_index * 2) + 1), bits);
-		}
-	} else {
-		/* clear the pool bit */
-		if (vind < 32) {
-			bits = IXGBE_READ_REG(hw,
-					      IXGBE_VLVFB(vlvf_index * 2));
-			bits &= ~(1 << vind);
-			IXGBE_WRITE_REG(hw,
-					IXGBE_VLVFB(vlvf_index * 2), bits);
-			bits |= IXGBE_READ_REG(hw,
-					IXGBE_VLVFB((vlvf_index * 2) + 1));
-		} else {
-			bits = IXGBE_READ_REG(hw,
-				IXGBE_VLVFB((vlvf_index * 2) + 1));
-			bits &= ~(1 << (vind - 32));
-			IXGBE_WRITE_REG(hw,
-				IXGBE_VLVFB((vlvf_index * 2) + 1), bits);
-			bits |= IXGBE_READ_REG(hw,
-					       IXGBE_VLVFB(vlvf_index * 2));
-		}
-	}
-
-	if (bits) {
-		IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
-				(IXGBE_VLVF_VIEN | vlan));
-		/* if bits is non-zero then some pools/VFs are still
-		 * using this VLAN ID.  Force the VFTA entry to on */
-		bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
-		bits |= (1 << bitindex);
-		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
-	}
-	else
-		IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
-
-out:
-	return 0;
-}
-
-/**
- *  ixgbe_clear_vfta_82599 - Clear VLAN filter table
- *  @hw: pointer to hardware structure
- *
- *  Clears the VLAN filer table, and the VMDq index associated with the filter
- **/
-static s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw)
-{
-	u32 offset;
-
-	for (offset = 0; offset < hw->mac.vft_size; offset++)
-		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
-
-	for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
-		IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
-	}
-
-	return 0;
-}
-
-/**
- *  ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array
- *  @hw: pointer to hardware structure
- **/
-static s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw)
-{
-	int i;
-	hw_dbg(hw, " Clearing UTA\n");
-
-	for (i = 0; i < 128; i++)
-		IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
-
-	return 0;
-}
-
-/**
  *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
  *  @hw: pointer to hardware structure
  **/
@@ -2550,75 +2238,6 @@ static s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
 }
 
 /**
- *  ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599
- *  @hw: pointer to hardware structure
- *  @san_mac_offset: SAN MAC address offset
- *
- *  This function will read the EEPROM location for the SAN MAC address
- *  pointer, and returns the value at that location.  This is used in both
- *  get and set mac_addr routines.
- **/
-static s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw,
-                                               u16 *san_mac_offset)
-{
-	/*
-	 * First read the EEPROM pointer to see if the MAC addresses are
-	 * available.
-	 */
-	hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
-
-	return 0;
-}
-
-/**
- *  ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599
- *  @hw: pointer to hardware structure
- *  @san_mac_addr: SAN MAC address
- *
- *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
- *  per-port, so set_lan_id() must be called before reading the addresses.
- *  set_lan_id() is called by identify_sfp(), but this cannot be relied
- *  upon for non-SFP connections, so we must call it here.
- **/
-static s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr)
-{
-	u16 san_mac_data, san_mac_offset;
-	u8 i;
-
-	/*
-	 * First read the EEPROM pointer to see if the MAC addresses are
-	 * available.  If they're not, no point in calling set_lan_id() here.
-	 */
-	ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset);
-
-	if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
-		/*
-		 * No addresses available in this EEPROM.  It's not an
-		 * error though, so just wipe the local address and return.
-		 */
-		for (i = 0; i < 6; i++)
-			san_mac_addr[i] = 0xFF;
-
-		goto san_mac_addr_out;
-	}
-
-	/* make sure we know which port we need to program */
-	hw->mac.ops.set_lan_id(hw);
-	/* apply the port offset to the address offset */
-	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
-	                 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
-	for (i = 0; i < 3; i++) {
-		hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
-		san_mac_addr[i * 2] = (u8)(san_mac_data);
-		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
-		san_mac_offset++;
-	}
-
-san_mac_addr_out:
-	return 0;
-}
-
-/**
  *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
  *  @hw: pointer to hardware structure
  *
@@ -2720,7 +2339,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
-	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_82599,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
 	.get_device_caps        = &ixgbe_get_device_caps_82599,
 	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
@@ -2729,7 +2348,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.read_analog_reg8       = &ixgbe_read_analog_reg8_82599,
 	.write_analog_reg8      = &ixgbe_write_analog_reg8_82599,
 	.setup_link             = &ixgbe_setup_mac_link_82599,
-	.check_link             = &ixgbe_check_mac_link_82599,
+	.check_link             = &ixgbe_check_mac_link_generic,
 	.get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
 	.led_on                 = &ixgbe_led_on_generic,
 	.led_off                = &ixgbe_led_off_generic,
@@ -2737,23 +2356,23 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
 	.set_rar                = &ixgbe_set_rar_generic,
 	.clear_rar              = &ixgbe_clear_rar_generic,
-	.set_vmdq               = &ixgbe_set_vmdq_82599,
-	.clear_vmdq             = &ixgbe_clear_vmdq_82599,
+	.set_vmdq               = &ixgbe_set_vmdq_generic,
+	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
 	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
 	.update_uc_addr_list    = &ixgbe_update_uc_addr_list_generic,
 	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
 	.enable_mc              = &ixgbe_enable_mc_generic,
 	.disable_mc             = &ixgbe_disable_mc_generic,
-	.clear_vfta             = &ixgbe_clear_vfta_82599,
-	.set_vfta               = &ixgbe_set_vfta_82599,
-	.fc_enable               = &ixgbe_fc_enable_generic,
-	.init_uta_tables        = &ixgbe_init_uta_tables_82599,
+	.clear_vfta             = &ixgbe_clear_vfta_generic,
+	.set_vfta               = &ixgbe_set_vfta_generic,
+	.fc_enable              = &ixgbe_fc_enable_generic,
+	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
 	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 	.init_params            = &ixgbe_init_eeprom_params_generic,
-	.read                   = &ixgbe_read_eeprom_generic,
+	.read                   = &ixgbe_read_eerd_generic,
 	.write                  = &ixgbe_write_eeprom_generic,
 	.validate_checksum      = &ixgbe_validate_eeprom_checksum_generic,
 	.update_checksum        = &ixgbe_update_eeprom_checksum_generic,
@@ -2762,7 +2381,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 static struct ixgbe_phy_operations phy_ops_82599 = {
 	.identify               = &ixgbe_identify_phy_82599,
 	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
-	.init			= &ixgbe_init_phy_ops_82599,
+	.init			            = &ixgbe_init_phy_ops_82599,
 	.reset                  = &ixgbe_reset_phy_generic,
 	.read_reg               = &ixgbe_read_phy_reg_generic,
 	.write_reg              = &ixgbe_write_phy_reg_generic,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 753f2ab..1159d91 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -34,7 +34,6 @@
 #include "ixgbe_common.h"
 #include "ixgbe_phy.h"
 
-static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw);
 static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
 static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
 static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
@@ -595,14 +594,14 @@ out:
 }
 
 /**
- *  ixgbe_read_eeprom_generic - Read EEPROM word using EERD
+ *  ixgbe_read_eerd_generic - Read EEPROM word using EERD
  *  @hw: pointer to hardware structure
  *  @offset: offset of  word in the EEPROM to read
  *  @data: word read from the EEPROM
  *
  *  Reads a 16 bit word from the EEPROM using the EERD register.
  **/
-s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
 {
 	u32 eerd;
 	s32 status;
@@ -614,15 +613,15 @@ s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
 		goto out;
 	}
 
-	eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) +
-	       IXGBE_EEPROM_READ_REG_START;
+	eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) +
+	       IXGBE_EEPROM_RW_REG_START;
 
 	IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
-	status = ixgbe_poll_eeprom_eerd_done(hw);
+	status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
 
 	if (status == 0)
 		*data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
-		         IXGBE_EEPROM_READ_REG_DATA);
+		         IXGBE_EEPROM_RW_REG_DATA);
 	else
 		hw_dbg(hw, "Eeprom read timed out\n");
 
@@ -631,20 +630,26 @@ out:
 }
 
 /**
- *  ixgbe_poll_eeprom_eerd_done - Poll EERD status
+ *  ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
  *  @hw: pointer to hardware structure
+ *  @ee_reg: EEPROM flag for polling
  *
- *  Polls the status bit (bit 1) of the EERD to determine when the read is done.
+ *  Polls the status bit (bit 1) of the EERD or EEWR to determine when the
+ *  read or write is done respectively.
  **/
-static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw)
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
 {
 	u32 i;
 	u32 reg;
 	s32 status = IXGBE_ERR_EEPROM;
 
-	for (i = 0; i < IXGBE_EERD_ATTEMPTS; i++) {
-		reg = IXGBE_READ_REG(hw, IXGBE_EERD);
-		if (reg & IXGBE_EEPROM_READ_REG_DONE) {
+	for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
+		if (ee_reg == IXGBE_NVM_POLL_READ)
+			reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+		else
+			reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
+
+		if (reg & IXGBE_EEPROM_RW_REG_DONE) {
 			status = 0;
 			break;
 		}
@@ -2255,3 +2260,490 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
 
 	return 0;
 }
+
+/**
+ *  ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_offset: SAN MAC address offset
+ *
+ *  This function will read the EEPROM location for the SAN MAC address
+ *  pointer, and returns the value at that location.  This is used in both
+ *  get and set mac_addr routines.
+ **/
+static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+                                        u16 *san_mac_offset)
+{
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.
+	 */
+	hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @san_mac_addr: SAN MAC address
+ *
+ *  Reads the SAN MAC address from the EEPROM, if it's available.  This is
+ *  per-port, so set_lan_id() must be called before reading the addresses.
+ *  set_lan_id() is called by identify_sfp(), but this cannot be relied
+ *  upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+	u16 san_mac_data, san_mac_offset;
+	u8 i;
+
+	/*
+	 * First read the EEPROM pointer to see if the MAC addresses are
+	 * available.  If they're not, no point in calling set_lan_id() here.
+	 */
+	ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+
+	if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
+		/*
+		 * No addresses available in this EEPROM.  It's not an
+		 * error though, so just wipe the local address and return.
+		 */
+		for (i = 0; i < 6; i++)
+			san_mac_addr[i] = 0xFF;
+
+		goto san_mac_addr_out;
+	}
+
+	/* make sure we know which port we need to program */
+	hw->mac.ops.set_lan_id(hw);
+	/* apply the port offset to the address offset */
+	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+	                 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+	for (i = 0; i < 3; i++) {
+		hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
+		san_mac_addr[i * 2] = (u8)(san_mac_data);
+		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+		san_mac_offset++;
+	}
+
+san_mac_addr_out:
+	return 0;
+}
+
+/**
+ *  ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
+ *  @hw: pointer to hardware structure
+ *
+ *  Read PCIe configuration space, and get the MSI-X vector count from
+ *  the capabilities table.
+ **/
+u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u16 msix_count;
+	pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS,
+	                     &msix_count);
+	msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+	/* MSI-X count is zero-based in HW, so increment to give proper value */
+	msix_count++;
+
+	return msix_count;
+}
+
+/**
+ *  ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to disassociate
+ *  @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar_lo, mpsar_hi;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	if (rar < rar_entries) {
+		mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+		mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+
+		if (!mpsar_lo && !mpsar_hi)
+			goto done;
+
+		if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+			if (mpsar_lo) {
+				IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+				mpsar_lo = 0;
+			}
+			if (mpsar_hi) {
+				IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+				mpsar_hi = 0;
+			}
+		} else if (vmdq < 32) {
+			mpsar_lo &= ~(1 << vmdq);
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
+		} else {
+			mpsar_hi &= ~(1 << (vmdq - 32));
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
+		}
+
+		/* was that the last pool using this rar? */
+		if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+			hw->mac.ops.clear_rar(hw, rar);
+	} else {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+	}
+
+done:
+	return 0;
+}
+
+/**
+ *  ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
+ *  @hw: pointer to hardware struct
+ *  @rar: receive address register index to associate with a VMDq index
+ *  @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+	u32 mpsar;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	if (rar < rar_entries) {
+		if (vmdq < 32) {
+			mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+			mpsar |= 1 << vmdq;
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+		} else {
+			mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+			mpsar |= 1 << (vmdq - 32);
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
+		}
+	} else {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+	}
+	return 0;
+}
+
+/**
+ *  ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
+{
+	int i;
+
+
+	for (i = 0; i < 128; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *
+ *  return the VLVF index where this VLAN id should be placed
+ *
+ **/
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+{
+	u32 bits = 0;
+	u32 first_empty_slot = 0;
+	s32 regindex;
+
+	/* short cut the special case */
+	if (vlan == 0)
+		return 0;
+
+	/*
+	  * Search for the vlan id in the VLVF entries. Save off the first empty
+	  * slot found along the way
+	  */
+	for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+		bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+		if (!bits && !(first_empty_slot))
+			first_empty_slot = regindex;
+		else if ((bits & 0x0FFF) == vlan)
+			break;
+	}
+
+	/*
+	  * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
+	  * in the VLVF. Else use the first empty VLVF register for this
+	  * vlan id.
+	  */
+	if (regindex >= IXGBE_VLVF_ENTRIES) {
+		if (first_empty_slot)
+			regindex = first_empty_slot;
+		else {
+			hw_dbg(hw, "No space in VLVF.\n");
+			regindex = IXGBE_ERR_NO_SPACE;
+		}
+	}
+
+	return regindex;
+}
+
+/**
+ *  ixgbe_set_vfta_generic - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+                           bool vlan_on)
+{
+	s32 regindex;
+	u32 bitindex;
+	u32 vfta;
+	u32 bits;
+	u32 vt;
+	u32 targetbit;
+	bool vfta_changed = false;
+
+	if (vlan > 4095)
+		return IXGBE_ERR_PARAM;
+
+	/*
+	 * this is a 2 part operation - first the VFTA, then the
+	 * VLVF and VLVFB if VT Mode is set
+	 * We don't write the VFTA until we know the VLVF part succeeded.
+	 */
+
+	/* Part 1
+	 * The VFTA is a bitstring made up of 128 32-bit registers
+	 * that enable the particular VLAN id, much like the MTA:
+	 *    bits[11-5]: which register
+	 *    bits[4-0]:  which bit in the register
+	 */
+	regindex = (vlan >> 5) & 0x7F;
+	bitindex = vlan & 0x1F;
+	targetbit = (1 << bitindex);
+	vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+
+	if (vlan_on) {
+		if (!(vfta & targetbit)) {
+			vfta |= targetbit;
+			vfta_changed = true;
+		}
+	} else {
+		if ((vfta & targetbit)) {
+			vfta &= ~targetbit;
+			vfta_changed = true;
+		}
+	}
+
+	/* Part 2
+	 * If VT Mode is set
+	 *   Either vlan_on
+	 *     make sure the vlan is in VLVF
+	 *     set the vind bit in the matching VLVFB
+	 *   Or !vlan_on
+	 *     clear the pool bit and possibly the vind
+	 */
+	vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+	if (vt & IXGBE_VT_CTL_VT_ENABLE) {
+		s32 vlvf_index;
+
+		vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
+		if (vlvf_index < 0)
+			return vlvf_index;
+
+		if (vlan_on) {
+			/* set the pool bit */
+			if (vind < 32) {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2));
+				bits |= (1 << vind);
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2),
+						bits);
+			} else {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1));
+				bits |= (1 << (vind-32));
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1),
+						bits);
+			}
+		} else {
+			/* clear the pool bit */
+			if (vind < 32) {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2));
+				bits &= ~(1 << vind);
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2),
+						bits);
+				bits |= IXGBE_READ_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1));
+			} else {
+				bits = IXGBE_READ_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1));
+				bits &= ~(1 << (vind-32));
+				IXGBE_WRITE_REG(hw,
+						IXGBE_VLVFB((vlvf_index*2)+1),
+						bits);
+				bits |= IXGBE_READ_REG(hw,
+						IXGBE_VLVFB(vlvf_index*2));
+			}
+		}
+
+		/*
+		 * If there are still bits set in the VLVFB registers
+		 * for the VLAN ID indicated we need to see if the
+		 * caller is requesting that we clear the VFTA entry bit.
+		 * If the caller has requested that we clear the VFTA
+		 * entry bit but there are still pools/VFs using this VLAN
+		 * ID entry then ignore the request.  We're not worried
+		 * about the case where we're turning the VFTA VLAN ID
+		 * entry bit on, only when requested to turn it off as
+		 * there may be multiple pools and/or VFs using the
+		 * VLAN ID entry.  In that case we cannot clear the
+		 * VFTA bit until all pools/VFs using that VLAN ID have also
+		 * been cleared.  This will be indicated by "bits" being
+		 * zero.
+		 */
+		if (bits) {
+			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
+					(IXGBE_VLVF_VIEN | vlan));
+			if (!vlan_on) {
+				/* someone wants to clear the vfta entry
+				 * but some pools/VFs are still using it.
+				 * Ignore it. */
+				vfta_changed = false;
+			}
+		}
+		else
+			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+	}
+
+	if (vfta_changed)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
+{
+	u32 offset;
+
+	for (offset = 0; offset < hw->mac.vft_size; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
+		IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_check_mac_link_generic - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: true when link is up
+ *  @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+                               bool *link_up, bool link_up_wait_to_complete)
+{
+	u32 links_reg;
+	u32 i;
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	if (link_up_wait_to_complete) {
+		for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+			if (links_reg & IXGBE_LINKS_UP) {
+				*link_up = true;
+				break;
+			} else {
+				*link_up = false;
+			}
+			msleep(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+		}
+	} else {
+		if (links_reg & IXGBE_LINKS_UP)
+			*link_up = true;
+		else
+			*link_up = false;
+	}
+
+	if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+	    IXGBE_LINKS_SPEED_10G_82599)
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+	         IXGBE_LINKS_SPEED_1G_82599)
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+	else
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+
+	/* if link is down, zero out the current_mode */
+	if (*link_up == false) {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw->fc.fc_was_autonegged = false;
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
+ *  the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+                                 u16 *wwpn_prefix)
+{
+	u16 offset, caps;
+	u16 alt_san_mac_blk_offset;
+
+	/* clear output first */
+	*wwnn_prefix = 0xFFFF;
+	*wwpn_prefix = 0xFFFF;
+
+	/* check if alternative SAN MAC is supported */
+	hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
+	                    &alt_san_mac_blk_offset);
+
+	if ((alt_san_mac_blk_offset == 0) ||
+	    (alt_san_mac_blk_offset == 0xFFFF))
+		goto wwn_prefix_out;
+
+	/* check capability in alternative san mac address block */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+	hw->eeprom.ops.read(hw, offset, &caps);
+	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+		goto wwn_prefix_out;
+
+	/* get the corresponding prefix for WWNN/WWPN */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+
+wwn_prefix_out:
+	return 0;
+}
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 264eef5..3080afb 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -30,6 +30,7 @@
 
 #include "ixgbe_type.h"
 
+u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
 s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
@@ -45,12 +46,13 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
 
 s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
 s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
-s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
 s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
                                        u16 *data);
 s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
                                            u16 *checksum_val);
 s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
 
 s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
                           u32 enable_addr);
@@ -70,9 +72,16 @@ s32 ixgbe_validate_mac_addr(u8 *mac_addr);
 s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask);
 void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask);
 s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
-
-s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val);
-s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
+                           u32 vind, bool vlan_on);
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
+                                 ixgbe_link_speed *speed,
+                                 bool *link_up, bool link_up_wait_to_complete);
 
 s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 8fc59ac..bd69196 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -73,6 +73,7 @@
 /* NVM Registers */
 #define IXGBE_EEC       0x10010
 #define IXGBE_EERD      0x10014
+#define IXGBE_EEWR      0x10018
 #define IXGBE_FLA       0x1001C
 #define IXGBE_EEMNGCTL  0x10110
 #define IXGBE_EEMNGDATA 0x10114
@@ -699,6 +700,7 @@
 #define IXGBE_MREVID    0x11064
 #define IXGBE_DCA_ID    0x11070
 #define IXGBE_DCA_CTRL  0x11074
+#define IXGBE_SWFW_SYNC IXGBE_GSSR
 
 /* PCIe registers 82599-specific */
 #define IXGBE_GCR_EXT           0x11050
@@ -1463,8 +1465,9 @@
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
 #define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
 #define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */
 
-/* GSSR definitions */
+/* SW_FW_SYNC/GSSR definitions */
 #define IXGBE_GSSR_EEP_SM     0x0001
 #define IXGBE_GSSR_PHY0_SM    0x0002
 #define IXGBE_GSSR_PHY1_SM    0x0004
@@ -1484,6 +1487,8 @@
 #define IXGBE_EEC_GNT       0x00000080 /* EEPROM Access Grant */
 #define IXGBE_EEC_PRES      0x00000100 /* EEPROM Present */
 #define IXGBE_EEC_ARD       0x00000200 /* EEPROM Auto Read Done */
+#define IXGBE_EEC_FLUP      0x00800000 /* Flash update command */
+#define IXGBE_EEC_FLUDONE   0x04000000 /* Flash update done */
 /* EEPROM Addressing bits based on type (0-small, 1-large) */
 #define IXGBE_EEC_ADDR_SIZE 0x00000400
 #define IXGBE_EEC_SIZE      0x00007800 /* EEPROM Size */
@@ -1539,10 +1544,12 @@
 #define IXGBE_EEPROM_ERASE256_OPCODE_SPI  0xDB  /* EEPROM ERASE 256B */
 
 /* EEPROM Read Register */
-#define IXGBE_EEPROM_READ_REG_DATA   16   /* data offset in EEPROM read reg */
-#define IXGBE_EEPROM_READ_REG_DONE   2    /* Offset to READ done bit */
-#define IXGBE_EEPROM_READ_REG_START  1    /* First bit to start operation */
-#define IXGBE_EEPROM_READ_ADDR_SHIFT 2    /* Shift to the address bits */
+#define IXGBE_EEPROM_RW_REG_DATA   16 /* data offset in EEPROM read reg */
+#define IXGBE_EEPROM_RW_REG_DONE   2  /* Offset to READ done bit */
+#define IXGBE_EEPROM_RW_REG_START  1  /* First bit to start operation */
+#define IXGBE_EEPROM_RW_ADDR_SHIFT 2  /* Shift to the address bits */
+#define IXGBE_NVM_POLL_WRITE       1  /* Flag for polling for write complete */
+#define IXGBE_NVM_POLL_READ        0  /* Flag for polling for read complete */
 
 #define IXGBE_ETH_LENGTH_OF_ADDRESS   6
 
@@ -1550,9 +1557,15 @@
 #define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
 #endif
 
-#ifndef IXGBE_EERD_ATTEMPTS
-/* Number of 5 microseconds we wait for EERD read to complete */
-#define IXGBE_EERD_ATTEMPTS 100000
+#ifndef IXGBE_EERD_EEWR_ATTEMPTS
+/* Number of 5 microseconds we wait for EERD read and
+ * EERW write to complete */
+#define IXGBE_EERD_EEWR_ATTEMPTS 100000
+#endif
+
+#ifndef IXGBE_FLUDONE_ATTEMPTS
+/* # attempts we wait for flush update to complete */
+#define IXGBE_FLUDONE_ATTEMPTS 20000
 #endif
 
 #define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET  0x0
@@ -2476,6 +2489,7 @@ struct ixgbe_mac_info {
 	u32                             mcft_size;
 	u32                             vft_size;
 	u32                             num_rar_entries;
+	u32                             rar_highwater;
 	u32                             max_tx_queues;
 	u32                             max_rx_queues;
 	u32                             max_msix_vectors;
@@ -2582,8 +2596,10 @@ struct ixgbe_info {
 #define IXGBE_ERR_SFP_NOT_SUPPORTED             -19
 #define IXGBE_ERR_SFP_NOT_PRESENT               -20
 #define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT       -21
+#define IXGBE_ERR_NO_SAN_ADDR_PTR               -22
 #define IXGBE_ERR_FDIR_REINIT_FAILED            -23
 #define IXGBE_ERR_EEPROM_VERSION                -24
+#define IXGBE_ERR_NO_SPACE                      -25
 #define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
 
 #endif /* _IXGBE_TYPE_H_ */