ixgbe: add support for Dell CEM

This patch adds support for Dell CEM (Comprehensive Embedded Management)).
This consists of informing the management firmware of the driver version
during probe on 82599 and X540 HW.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 174 insertions, 0 deletions

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index cc2a4a1..777051f 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -3333,3 +3333,177 @@ void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw,
 		IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
 	}
 }
+
+/**
+ *  ixgbe_calculate_checksum - Calculate checksum for buffer
+ *  @buffer: pointer to EEPROM
+ *  @length: size of EEPROM to calculate a checksum for
+ *  Calculates the checksum for some buffer on a specified length.  The
+ *  checksum calculated is returned.
+ **/
+static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
+{
+	u32 i;
+	u8 sum = 0;
+
+	if (!buffer)
+		return 0;
+
+	for (i = 0; i < length; i++)
+		sum += buffer[i];
+
+	return (u8) (0 - sum);
+}
+
+/**
+ *  ixgbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *           be placed
+ *  @lenght: lenght of buffer, must be multiple of 4 bytes
+ *
+ *  Communicates with the manageability block.  On success return 0
+ *  else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ **/
+static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u8 *buffer,
+					u32 length)
+{
+	u32 hicr, i;
+	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+	u8 buf_len, dword_len;
+
+	s32 ret_val = 0;
+
+	if (length == 0 || length & 0x3 ||
+	    length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		hw_dbg(hw, "Buffer length failure.\n");
+		ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto out;
+	}
+
+	/* Check that the host interface is enabled. */
+	hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+	if ((hicr & IXGBE_HICR_EN) == 0) {
+		hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n");
+		ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto out;
+	}
+
+	/* Calculate length in DWORDs */
+	dword_len = length >> 2;
+
+	/*
+	 * The device driver writes the relevant command block
+	 * into the ram area.
+	 */
+	for (i = 0; i < dword_len; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+				      i, *((u32 *)buffer + i));
+
+	/* Setting this bit tells the ARC that a new command is pending. */
+	IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
+
+	for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) {
+		hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+		if (!(hicr & IXGBE_HICR_C))
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	/* Check command successful completion. */
+	if (i == IXGBE_HI_COMMAND_TIMEOUT ||
+	    (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) {
+		hw_dbg(hw, "Command has failed with no status valid.\n");
+		ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto out;
+	}
+
+	/* Calculate length in DWORDs */
+	dword_len = hdr_size >> 2;
+
+	/* first pull in the header so we know the buffer length */
+	for (i = 0; i < dword_len; i++)
+		*((u32 *)buffer + i) =
+			IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
+
+	/* If there is any thing in data position pull it in */
+	buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
+	if (buf_len == 0)
+		goto out;
+
+	if (length < (buf_len + hdr_size)) {
+		hw_dbg(hw, "Buffer not large enough for reply message.\n");
+		ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto out;
+	}
+
+	/* Calculate length in DWORDs, add one for odd lengths */
+	dword_len = (buf_len + 1) >> 2;
+
+	/* Pull in the rest of the buffer (i is where we left off)*/
+	for (; i < buf_len; i++)
+		*((u32 *)buffer + i) =
+			IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
+ *  @hw: pointer to the HW structure
+ *  @maj: driver version major number
+ *  @min: driver version minor number
+ *  @build: driver version build number
+ *  @sub: driver version sub build number
+ *
+ *  Sends driver version number to firmware through the manageability
+ *  block.  On success return 0
+ *  else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+				 u8 build, u8 sub)
+{
+	struct ixgbe_hic_drv_info fw_cmd;
+	int i;
+	s32 ret_val = 0;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) != 0) {
+		ret_val = IXGBE_ERR_SWFW_SYNC;
+		goto out;
+	}
+
+	fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
+	fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
+	fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+	fw_cmd.port_num = (u8)hw->bus.func;
+	fw_cmd.ver_maj = maj;
+	fw_cmd.ver_min = min;
+	fw_cmd.ver_build = build;
+	fw_cmd.ver_sub = sub;
+	fw_cmd.hdr.checksum = 0;
+	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
+	fw_cmd.pad = 0;
+	fw_cmd.pad2 = 0;
+
+	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+		ret_val = ixgbe_host_interface_command(hw, (u8 *)&fw_cmd,
+						       sizeof(fw_cmd));
+		if (ret_val != 0)
+			continue;
+
+		if (fw_cmd.hdr.cmd_or_resp.ret_status ==
+		    FW_CEM_RESP_STATUS_SUCCESS)
+			ret_val = 0;
+		else
+			ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+
+		break;
+	}
+
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+out:
+	return ret_val;
+}